AVSPARE.COM
parts catalog

115-2985 COVER GP-CYLINDER BLOCK FOR USE WITH @@@@@117-2786@@@@@, SPIN ON PAPER BYPASS FILTER OR WHEN NO BYPASS FILTER IS USED ALSO AN ATTACHMENT C-12




BASIC ENGINE

CYLINDER BLOCK GP
 

#SEBP35540020
 

115-2985: COVER GP-CYLINDER BLOCK

115-2985 COVER GP-CYLINDER BLOCK
FOR USE WITH @@@@@117-2786@@@@@, SPIN ON PAPER BYPASS FILTER OR WHEN NO BYPASS FILTER IS USED
ALSO AN ATTACHMENT
i00491113 SEBP3554
  For full view, you need register

Parts for your C-12 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-6587 [1] COVER  
2. 6V-5217 M [2] BOLT (M8X1.25X20-MM)  
3. 9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
4. 6V-1250 [1] SEAL-O-RING  
  M   METRIC PART
 

#SEBP35540021
 

113-8987: COVER GP-FRONT HOUSING

113-8987 COVER GP-FRONT HOUSING
POWER TAKE-OFF
i00480178 SEBP3554
  For full view, you need register

Parts for your C-12 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-5842 M [2] BOLT (M10X1.5X40-MM)  
2. 6V-5839 [2] WASHER (11X21X2.5-MM THK)  
3. 129-2905 [1] COVER  
4. 107-5769 [1] SEAL-O-RING  
  M   METRIC PART
 

#SEBP35540022
 

132-3212: CRANKSHAFT GP

132-3212 CRANKSHAFT GP
i01237483 SEBP3554
  For full view, you need register

Parts for your C-12 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 211-0588 J [3] BEARING-MAIN (STANDARD)  
  128-0382 AB BEARING-MAIN (0.51-MM US)  
  128-0383 AB BEARING-MAIN (0.76-MM US)  
  128-0384 AB BEARING-MAIN (0.51-MM OS)  
  128-0385 AB BEARING-MAIN (0.51-MM OS, 0.51-MM US)  
2. 246-3144 J [2] PLATE-THRUST  
3. 211-0587 J [4] BEARING-MAIN (STANDARD)  
  128-0400 AB BEARING-MAIN (0.51-MM US)  
  128-0401 AB BEARING-MAIN (0.76-MM US)  
  128-0402 AB BEARING-MAIN (0.51-MM OS)  
  128-0403 AB BEARING-MAIN (0.51-MM OS, 0.51-MM US)  
4. 326-4280 [1] CRANKSHAFT AS  
4A. 6V-3536 [1] DOWEL  
4B. 187-8972 [1] GEAR-CRANKSHAFT (48-TEETH)  
4C. 9Y-0821 [1] SLEEVE (FRONT SEAL)  
4D. 9Y-0810 [1] SLEEVE-WEAR (REAR SEAL)  
   
    AVAILABLE REPAIR KIT(S):
  196-9521 J [1] BEARING GP-MAIN (CRANKSHAFT)  
    (INCLUDES STANDARD MAIN BEARINGS & THRUST PLATES)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  J   KIT MARKED J INCLUDES PART(S) MARKED J
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP35540023
 

200-2054: CYLINDER BLOCK AS

200-2054 CYLINDER BLOCK AS
PART OF 204-3449 CYLINDER BLOCK AS
i01570210 SEBP3554
  For full view, you need register

Parts for your C-12 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 216-5584 [1] BUSHING  
2. 117-0166 [7] CAP-BEARING  
3. 175-0454 M [14] BOLT (M16X2X160-MM)  
4. 5P-8247 [14] WASHER-HARD (17X32X3.5-MM THK)  
5. 216-5585 [1] BUSHING  
6. 216-5583 [5] BUSHING  
  M   METRIC PART
 

#SEBP35540024
 

204-3449: CYLINDER BLOCK AS

204-3449 CYLINDER BLOCK AS
PART OF 115-2983, 195-6594 CYLINDER BLOCK GP
i01560010 SEBP3554
  For full view, you need register

Parts for your C-12 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 200-2054 Y [1] CYLINDER BLOCK AS  
2. 197-9330 [6] LINER-CYLINDER BLOCK  
3. 437-1409 [6] SEAL-LINER  
4. 4F-5695 [6] PLUG-CUP  
   
    AVAILABLE REPLACEMENT PART(S):
  168-7363 ABJ SHIM-LINER (0.22-MM THK)  
  168-7364 ABJ SHIM-LINER (0.25-MM THK)  
  168-7365 ABJ SHIM-LINER (0.28-MM THK)  
  168-7366 ABJ SHIM-LINER (0.5-MM THK)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  J   USED TO SET LINER PROTRUSION ON REBUILT MID-SUPPORT LINER ENGINE
  Y   SEPARATE ILLUSTRATION
 

#SEBP35540025
 

115-2983: CYLINDER BLOCK GP

115-2983 CYLINDER BLOCK GP
i01562967 SEBP3554
  For full view, you need register

Parts for your C-12 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 204-3449 CY [1] CYLINDER BLOCK AS  
2. 7N-5683 [6] DOWEL  
6. 6V-3538 [2] DOWEL  
7. 1N-5999 [2] PLUG-O-RING  
8. 5P-7813 [2] SEAL-O-RING  
9. 9S-8002 [1] PLUG (7/16-20-THD)  
10. 6V-5048 [1] SEAL-O-RING  
11. 3B-0623 [3] PLUG-CUP  
12. 4G-4972 [6] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP35540026
 

195-6594: CYLINDER BLOCK GP

195-6594 CYLINDER BLOCK GP
S/N 9HP1-387
i01559874 SEBP3554
  For full view, you need register

Parts for your C-12 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 204-3449 Y [1] CYLINDER BLOCK AS  
2. 7N-5683 [6] DOWEL  
3. 195-6606 [6] JET AS-PISTON COOLING  
4. 8T-0100 M [6] BOLT (M8X1.25X60-MM)  
5. 3E-4352 [6] WASHER-HARD (8.8X20.5X2.5-MM THK)  
6. 6V-3538 [2] DOWEL  
7. 1N-5999 [2] PLUG-O-RING  
8. 5P-7813 [2] SEAL-O-RING  
9. 9S-8002 [1] PLUG (7/16-20-THD)  
10. 6V-5048 [1] SEAL-O-RING  
11. 3B-0623 [3] PLUG-CUP  
12. 4G-4972 [6] SEAL-O-RING  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP35540027
 

148-2133: CYLINDER HEAD AS

148-2133 CYLINDER HEAD AS
S/N 9HP1-UP
FIELD REPLACEMENT FOR @@@@@148-2135@@@@@
i01012183 SEBP3554
  For full view, you need register

Parts for your C-12 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 148-2135 Y [1] CYLINDER HEAD AS  
2. 144-2904 [24] GUIDE-VALVE  
  Y   SEPARATE ILLUSTRATION
 

#SEBP35540028
 

148-2135: CYLINDER HEAD AS

148-2135 CYLINDER HEAD AS
PART OF 148-2133 CYLINDER HEAD AS, 148-2134 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@148-2133@@@@@
i01012182 SEBP3554
  For full view, you need register

Parts for your C-12 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-7604 [16] PLUG-CUP  
2. 3B-0623 [8] PLUG-CUP  
3. 138-2005 [12] INSERT-VALVE SEAT (EXHAUST)(STANDARD)  
  144-2951 AB INSERT-VALVE SEAT (0.508-MM OS)  
4. 138-2006 [12] INSERT-VALVE SEAT (INLET)(STANDARD)  
  144-2952 AB INSERT-VALVE SEAT (0.508-MM OS)  
5. 116-1102 [6] SLEEVE-INJECTOR  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
 

#SEBP35540029
 

123-0457: CYLINDER HEAD GP

123-0457 CYLINDER HEAD GP
i01012180 SEBP3554
  For full view, you need register

Parts for your C-12 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 148-2134 CY [1] CYLINDER HEAD GP  
2. 6V-9607 M [7] BOLT (M8X1.25X120-MM)  
3. 187-3307 [1] GASKET AS-CYLINDER HEAD  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
Special Instruction
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 0R9661, 0R8209, 10R1491, and 0R9680 SHORT BLOCKS FROM DEALER PART STOCK.
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 0R9661, 0R8209, 10R1491, and 0R9680 SHORT BLOCKS FROM DEALER PART STOCK.
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Truck/Ag/Marine
Specifications
Cylinder Liner Projection
C12 Marine Engines
Main Bearing Journal
C12 Marine Engines
Cylinder Block
C12 Marine Engines
Piston Cooling Jet
C12 Marine Engines
Cylinder Liner
C12 Marine Engines
Cylinder Liner
C12 Marine Engines
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 0R9661, 0R8209, 10R1491, and 0R9680 SHORT BLOCKS FROM DEALER PART STOCK.
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 0R9661, 0R8209, 10R1491, and 0R9680 SHORT BLOCKS FROM DEALER PART STOCK.
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Information Release Memo
PRODUCT LINE ADDITIONS: REMANUFACTURED LONG BLOCKS FOR CERTAIN C-12 ENGINE APPLICATIONS
PRODUCT LINE ADDITIONS: REMANUFACTURED LONG BLOCKS FOR CERTAIN C-12 ENGINE APPLICATIONS
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 0R9661, 0R8209, 10R1491, and 0R9680 SHORT BLOCKS FROM DEALER PART STOCK.
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 0R9661, 0R8209, 10R1491, and 0R9680 SHORT BLOCKS FROM DEALER PART STOCK.
Testing and Adjusting
Main Bearings - Inspect
C12 Marine Engine
Cylinder Block - Inspect
C12 Marine Engine
Disassembly and Assembly
Bearing Clearance - Check
C-12 Marine Engines
Camshaft Bearings - Remove
C-12 Marine Engines
Camshaft Bearings - Install
C-12 Marine Engines
Cylinder Liner - Remove
C-12 Marine Engines
Cylinder Liner - Install
C-12 Marine Engines

Caterpillar Parts SIS Catalog C-12 :

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.