381-4822 LINES GP-TURBOCHARGER OIL S/N PTM1-UP AN ATTACHMENT 3512B GENERATOR SET



AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP
LUBRICATION SYSTEM
FILTER GP-ENGINE OIL
PUMP GP-PRELUBRICATION
PUMP GP-ENGINE OIL

GENERATOR SET 3512B GENERATOR SET PTM
 3512B Generator Set Oil Field Land Rig PTM00001-UP SEBP3555 3512B PTM   (2001)

AIR INLET AND EXHAUST SYSTEM

TURBOCHARGER GP
LINES GP-TURBOCHARGER OIL
101-1255 LINES GP-TURBOCHARGER OIL
LINES GP-TURBOCHARGER OIL
101-1255 LINES GP-TURBOCHARGER OIL
LINES GP-TURBOCHARGER OIL
381-4822 LINES GP-TURBOCHARGER OIL
CARTRIDGE GP-TURBOCHARGER
146-7852 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
450-1416 CARTRIDGE GP-TURBOCHARGER
553-4179 CARTRIDGE GP-TURBOCHARGER
 

#SEBP35550160
 

381-4822: LINES GP-TURBOCHARGER OIL

381-4822 LINES GP-TURBOCHARGER OIL
S/N PTM1-UP
AN ATTACHMENT
i04804730 SEBP3555
3814822 LINES GP-TURBOCHARGER OIL Parts scheme
  For full view, you need register

Parts for your 3512B GENERATOR SET:

Pos. Part No Qty Parts name Comments
1. 1W-7214 [2] ELBOW-DRAIN  
2. 4P-0692 [6] CLAMP AS  
  7C-2199 [1] CLAMP  
  108-1434 [1] GROMMET  
3. 6I-0804 [1] ADAPTER-TURBOCHARGER OIL  
4. 6I-0805 [1] ADAPTER-TURBOCHARGER OIL  
5. 7N-7559 [2] GASKET  
6. 7W-6333 [4] SPACER (10.5X20X10.7-MM THK)  
7. 113-4646 [1] TUBE AS  
8. 113-4648 [1] ELBOW  
9. 116-9863 [1] BRACKET  
10. 130-2602 [1] TUBE AS  
11. 166-5932 [1] TUBE AS  
12. 179-1508 [1] ELBOW  
13. 185-5855 [1] TUBE  
14. 250-1498 [1] ELBOW AS  
  6V-4589 [1] SEAL-O-RING  
  250-1497 [1] ELBOW  
15. 252-8374 [2] GASKET  
16. 0L-1143 [3] BOLT (3/8-16X2.5-IN)  
17. 0S-1590 [2] BOLT (3/8-16X2-IN)  
18. 0S-1594 [4] BOLT (3/8-16X1-IN)  
19. 0T-0573 [2] BOLT (3/8-16X2.75-IN)  
20. 1A-5964 [4] BOLT (3/8-16X4.5-IN)  
21. 2P-7636 [2] CONNECTOR (3/4-16 STR-THD)  
22. 4P-4460 [2] GASKET  
23. 5M-2894 [11] WASHER-HARD (10.2X18.5X2.5-MM THK)  
24. 5P-9890 [4] SEAL-O-RING  
25. 6V-4589 [1] SEAL-O-RING  
26. 8L-2786 [2] SEAL-O-RING  
27. 9M-4584 [1] CONNECTOR  
28. 9S-8752 [3] NUT-FULL (3/8-16-THD)  
29. 9X-6458 [1] WASHER-HARD (10.2X22.5X3-MM THK)  
 

#SEBP35550161
 

197-3887: MOUNTING GP-ENGINE OIL FILTER

197-3887 MOUNTING GP-ENGINE OIL FILTER
S/N PTM1-UP
FOR USE WITH ENGINES WITH LH SERVICE WITH ALTERNATOR
AN ATTACHMENT
i01559607 SEBP3555
1973887 MOUNTING GP-ENGINE OIL FILTER Parts scheme
  For full view, you need register

Parts for your 3512B GENERATOR SET:

Pos. Part No Qty Parts name Comments
1. 197-3884 [1] BRACKET-MODULE  
2. 197-3883 [1] PLATE-SUPPORT  
3. 1A-2029 [7] BOLT (3/8-16X1.125-IN)  
4. 5M-2894 [11] WASHER-HARD (10.2X18.5X2.5-MM THK)  
5. 0S-1591 [2] BOLT (3/8-16X1.5-IN)  
6. 9S-8752 [2] NUT-FULL (3/8-16-THD)  
7. 0S-1588 [3] BOLT (3/8-16X1.25-IN)  
8. 9X-6458 [3] WASHER-HARD (10.2X22.5X3-MM THK)  
9. 8N-9885 [1] GASKET-COVER  
10. 204-5460 BCY [1] SHIM PACK  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP35550162
 

244-1535: PUMP & LINES GP-PRELUBRICATION

244-1535 PUMP & LINES GP-PRELUBRICATION
S/N PTM1-UP
Type 1
AN ATTACHMENT
i02127868 SEBP3555
2441535 PUMP & LINES GP-PRELUBRICATION Parts scheme
  For full view, you need register

Parts for your 3512B GENERATOR SET:

Pos. Part No Qty Parts name Comments
1. 1M-3381 [4] SPACER (0.438X0.75X1-IN THK)  
2. 1N-3872 [2] SUPPORT  
3. 1W-3942 [1] ELBOW (INLET)  
4. 1W-3943 [1] COUPLING  
5. 1W-3944 [1] FLANGE  
6. 1W-4257 [1] BRACKET AS  
  4K-9097 [2] NUT-WELD (5/16-18-THD)  
7. 1W-8188 [1] ELBOW  
8. 2G-6303 [1] SEAL  
9. 2G-6304 [1] STRAINER AS (PRELUBRICATION PUMP)  
10. 2R-6806 [1] CONNECTOR  
11. 2W-0694 [1] ELBOW AS-VALVE  
  1P-5274 [1] PIN-VALVE SPRING  
  7L-0811 [1] DOWEL  
  9B-0701 [2] SPRING  
  9H-2367 [1] SPRING-VALVE  
  9L-0672 [1] VALVE-CHECK  
12. 3F-2065 [1] LOCKNUT (1/2-14-THD)  
13. 3T-3735 Y [1] PUMP GP-PRELUBRICATION  
14. 4P-4927 I [1] HOSE AS  
15. 5N-8943 [1] ADAPTER  
16. 5N-9073 [1] CLIP  
17. 251-9436 [1] BRACKET AS  
18. 7K-1181 [1] STRAP-CABLE  
19. 7N-6460 [1] TUBE  
20. 9M-7357 [1] COUPLING AS  
21. 032-1267 [1] CONNECTOR (STRAIGHT)  
22. 150-1240 [1] SWITCH AS-PRESSURE (STARTING OIL)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
23. 244-1546 [1] BRACKET  
24. 153-4906 [1] SEAL-O-RING  
25. 0L-1351 [2] BOLT (3/8-16X0.875-IN)  
26. 0S-1588 [3] BOLT (3/8-16X1.25-IN)  
27. 0S-1591 [2] BOLT (3/8-16X1.5-IN)  
28. 0S-1594 [4] BOLT (3/8-16X1-IN)  
29. 0S-1617 [8] BOLT (5/16-18X0.75-IN)  
30. 0T-0065 [2] BOLT (3/8-16X3.5-IN)  
31. 1A-5822 [4] BOLT (1/2-13X2.75-IN)  
32. 1W-4821 [1] HOSE AS  
33. 2B-2694 [4] BOLT (5/16-18X2-IN)  
34. 2B-2695 [2] BOLT (5/16-18X0.875-IN)  
35. 4P-7581 [1] CLIP (LADDER)  
36. 5M-2894 [12] WASHER-HARD (10.2X18.5X2.5-MM THK)  
37. 5P-5846 [2] SEAL-O-RING  
38. 5P-9890 [4] SEAL-O-RING  
39. 6V-5100 [2] SEAL-O-RING  
40. 7X-7731 [1] PLUG-PIPE (3/4-14-THD)  
41. 9M-1974 [6] WASHER-HARD (8.8X16X2-MM THK)  
42. 9S-8752 [3] NUT-FULL (3/8-16-THD)  
   
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

#SEBP35550163
 

244-1535: PUMP & LINES GP-PRELUBRICATION

244-1535 PUMP & LINES GP-PRELUBRICATION
S/N PTM1-UP
Type 2
AN ATTACHMENT
i02718406 SEBP3555
2441535 PUMP & LINES GP-PRELUBRICATION Parts scheme
  For full view, you need register

Parts for your 3512B GENERATOR SET:

Pos. Part No Qty Parts name Comments
1. 1M-3381 [4] SPACER (0.438X0.75X1-IN THK)  
2. 1N-3872 [2] SUPPORT  
3. 1W-3942 [1] ELBOW (INLET)  
4. 1W-3943 [1] COUPLING  
5. 1W-3944 [1] FLANGE  
6. 1W-4257 [1] BRACKET AS  
  4K-9097 [2] NUT-WELD (5/16-18-THD)  
7. 1W-8188 [1] ELBOW  
8. 2G-6303 [1] SEAL  
9. 2G-6304 [1] STRAINER AS (PRELUBRICATION PUMP)  
10. 2R-6806 [1] CONNECTOR  
11. 2W-0694 [1] ELBOW AS-VALVE  
  6T-7034 [1] PIN-VALVE SPRING  
  7L-0811 [1] DOWEL  
  9B-0701 [2] SPRING  
  9H-2367 [1] SPRING-VALVE  
  9L-0672 [1] VALVE-CHECK  
12. 3F-2065 [1] LOCKNUT (1/2-14-THD)  
13. 4P-4927 I [1] HOSE AS  
14. 5N-8943 [1] ADAPTER  
15. 5N-9073 [1] CLIP  
16. 7K-1181 [1] STRAP-CABLE  
17. 7N-6460 [1] TUBE  
18. 9M-7357 [1] COUPLING AS  
19. 032-1267 [1] CONNECTOR (STRAIGHT)  
20. 150-1240 [1] SWITCH AS-PRESSURE (STARTING OIL)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  9X-1813 E SLEEVE (15-CM)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
21. 244-1546 [1] BRACKET  
22. 251-9436 [1] BRACKET AS  
23. 302-8729 CY [1] PUMP GP-PRELUBRICATION  
24. 0L-1351 [2] BOLT (3/8-16X0.875-IN)  
25. 0S-1588 [3] BOLT (3/8-16X1.25-IN)  
26. 0S-1591 [2] BOLT (3/8-16X1.5-IN)  
27. 0S-1594 [4] BOLT (3/8-16X1-IN)  
28. 0S-1617 [8] BOLT (5/16-18X0.75-IN)  
29. 0S-1608 [2] BOLT (3/8-16X3.75-IN)  
30. 153-4906 [1] SEAL-O-RING  
31. 1A-5822 [4] BOLT (1/2-13X2.75-IN)  
32. 1W-4821 [1] HOSE AS  
33. 2B-2694 [4] BOLT (5/16-18X2-IN)  
34. 2B-2695 [2] BOLT (5/16-18X0.875-IN)  
35. 4P-7581 [1] CLIP (LADDER)  
36. 5M-2894 [10] WASHER-HARD (10.2X18.5X2.5-MM THK)  
37. 5P-5846 [2] SEAL-O-RING  
38. 5P-9890 [4] SEAL-O-RING  
39. 6V-5100 [2] SEAL-O-RING  
40. 7X-7731 [1] PLUG-PIPE (3/4-14-THD)  
41. 9M-1974 [6] WASHER-HARD (8.8X16X2-MM THK)  
42. 9S-8752 [3] NUT-FULL (3/8-16-THD)  
43. 9X-6458 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
   
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

#SEBP35550164
 

244-1535: PUMP & LINES GP-PRELUBRICATION

244-1535 PUMP & LINES GP-PRELUBRICATION
S/N PTM1-UP
Type 3
AN ATTACHMENT
i05518030 SEBP3555
2441535 PUMP & LINES GP-PRELUBRICATION Parts scheme
  For full view, you need register

Parts for your 3512B GENERATOR SET:

Pos. Part No Qty Parts name Comments
1. 1M-3381 [4] SPACER (0.438X0.75X1-IN THK)  
2. 1N-3872 [2] SUPPORT  
3. 1W-3942 [1] ELBOW (INLET)  
4. 1W-3943 [1] COUPLING  
5. 1W-3944 [1] FLANGE  
6. 1W-4257 [1] BRACKET AS  
  4K-9097 [2] NUT-WELD (5/16-18-THD)  
7. 1W-8188 [1] ELBOW  
8. 2G-6303 [1] SEAL  
9. 2G-6304 [1] STRAINER AS (PRELUBRICATION PUMP)  
10. 2R-6806 [1] CONNECTOR  
11. 2W-0694 [1] ELBOW AS-VALVE  
  6T-7034 [1] PIN-VALVE SPRING  
  7L-0811 [1] DOWEL  
  9B-0701 [2] SPRING  
  9H-2367 [1] SPRING-VALVE  
  9L-0672 [1] VALVE-CHECK  
12. 3F-2065 [1] LOCKNUT (1/2-14-THD)  
13. 4P-4927 I [1] HOSE AS  
14. 5N-8943 [1] ADAPTER  
15. 5N-9073 [1] CLIP  
16. 7K-1181 [1] STRAP-CABLE  
17. 7N-6460 [1] TUBE  
18. 9M-7357 [1] COUPLING AS  
19. 032-1267 [1] CONNECTOR (STRAIGHT)  
20. 150-1240 [1] SWITCH AS-PRESSURE (STARTING OIL)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  9X-1813 E SLEEVE (15-CM)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
21. 244-1546 [1] BRACKET  
22. 251-9436 [1] BRACKET AS  
23. 302-8729 Y [1] PUMP GP-PRELUBRICATION  
24. 0L-1351 [2] BOLT (3/8-16X0.875-IN)  
25. 0S-1588 [3] BOLT (3/8-16X1.25-IN)  
26. 0S-1591 [2] BOLT (3/8-16X1.5-IN)  
27. 0S-1594 [4] BOLT (3/8-16X1-IN)  
28. 0S-1617 [8] BOLT (5/16-18X0.75-IN)  
29. 0S-1608 [2] BOLT (3/8-16X3.75-IN)  
30. 153-4906 [1] SEAL-O-RING  
31. 1A-5822 [4] BOLT (1/2-13X2.75-IN)  
32. 425-5935 C [1] TUBE AS  
33. 2B-2694 [4] BOLT (5/16-18X2-IN)  
34. 2B-2695 [2] BOLT (5/16-18X0.875-IN)  
35. 4P-7581 [1] CLIP (LADDER)  
36. 5M-2894 [10] WASHER-HARD (10.2X18.5X2.5-MM THK)  
37. 5P-5846 [2] SEAL-O-RING  
38. 5P-9890 [4] SEAL-O-RING  
39. 6V-5100 [2] SEAL-O-RING  
40. 7X-7731 [1] PLUG-PIPE (3/4-14-THD)  
41. 9M-1974 [6] WASHER-HARD (8.8X16X2-MM THK)  
42. 9S-8752 [3] NUT-FULL (3/8-16-THD)  
43. 9X-6458 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
   
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

#SEBP35550165
 

244-1535: PUMP & LINES GP-PRELUBRICATION

244-1535 PUMP & LINES GP-PRELUBRICATION
S/N PTM1-UP
Type 4
AN ATTACHMENT
i05748175 SEBP3555
2441535 PUMP & LINES GP-PRELUBRICATION Parts scheme
  For full view, you need register

Parts for your 3512B GENERATOR SET:

Pos. Part No Qty Parts name Comments
1. 1M-3381 [4] SPACER (0.438X0.75X1-IN THK)  
2. 1N-3872 [2] SUPPORT  
3. 1W-3942 [1] ELBOW (INLET)  
4. 1W-3943 [1] COUPLING  
5. 1W-3944 [1] FLANGE  
6. 1W-4257 [1] BRACKET AS  
  4K-9097 [2] NUT-WELD (5/16-18-THD)  
7. 1W-8188 [1] ELBOW  
8. 2G-6303 [1] SEAL  
9. 2G-6304 [1] STRAINER AS (PRELUBRICATION PUMP)  
10. 2R-6806 [1] CONNECTOR  
11. 2W-0694 [1] ELBOW AS-VALVE  
  6T-7034 [1] PIN-VALVE SPRING  
  7L-0811 [1] DOWEL  
  9B-0701 [2] SPRING  
  9H-2367 [1] SPRING-VALVE  
  9L-0672 [1] VALVE-CHECK  
12. 3F-2065 [1] LOCKNUT (1/2-14-THD)  
13. 4P-4927 I [1] HOSE AS  
14. 5N-8943 [1] ADAPTER  
15. 5N-9073 [1] CLIP  
16. 7K-1181 [1] STRAP-CABLE  
17. 7N-6460 [1] TUBE  
18. 9M-7357 [1] COUPLING AS  
19. 032-1267 [1] CONNECTOR (STRAIGHT)  
20. 448-5598 C [1] SWITCH AS-PRESSURE (STARTING OIL)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  9X-1813 E SLEEVE (15-CM)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
21. 244-1546 [1] BRACKET  
22. 251-9436 [1] BRACKET AS  
23. 302-8729 Y [1] PUMP GP-PRELUBRICATION  
24. 0L-1351 [2] BOLT (3/8-16X0.875-IN)  
25. 0S-1588 [3] BOLT (3/8-16X1.25-IN)  
26. 0S-1591 [2] BOLT (3/8-16X1.5-IN)  
27. 0S-1594 [4] BOLT (3/8-16X1-IN)  
28. 0S-1617 [8] BOLT (5/16-18X0.75-IN)  
29. 0S-1608 [2] BOLT (3/8-16X3.75-IN)  
30. 153-4906 [1] SEAL-O-RING  
31. 1A-5822 [4] BOLT (1/2-13X2.75-IN)  
32. 425-5935 [1] TUBE AS  
33. 2B-2694 [4] BOLT (5/16-18X2-IN)  
34. 2B-2695 [2] BOLT (5/16-18X0.875-IN)  
35. 4P-7581 [1] CLIP (LADDER)  
36. 5M-2894 [10] WASHER-HARD (10.2X18.5X2.5-MM THK)  
37. 5P-5846 [2] SEAL-O-RING  
38. 112-3540 [4] SEAL-O-RING  
39. 6V-5100 [2] SEAL-O-RING  
40. 7X-7731 [1] PLUG-PIPE (3/4-14-THD)  
41. 9M-1974 [6] WASHER-HARD (8.8X16X2-MM THK)  
42. 9S-8752 [3] NUT-FULL (3/8-16-THD)  
43. 9X-6458 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

#SEBP35550166
 

249-5262: PUMP & LINES GP-PRELUBRICATION

249-5262 PUMP & LINES GP-PRELUBRICATION -DEEP PAN
S/N PTM1-UP
Type 1
AN ATTACHMENT
i02127875 SEBP3555
2495262 PUMP & LINES GP-PRELUBRICATION Parts scheme
  For full view, you need register

Parts for your 3512B GENERATOR SET:

Pos. Part No Qty Parts name Comments
1. 1M-3381 [4] SPACER (0.438X0.75X1-IN THK)  
2. 1N-3872 [2] SUPPORT  
3. 1W-3942 [1] ELBOW  
4. 1W-3943 [1] COUPLING  
5. 1W-3944 [1] FLANGE  
6. 1W-4257 [1] BRACKET AS  
  4K-9097 [2] NUT-WELD (5/16-18-THD)  
7. 1W-4820 [1] HOSE AS (DEEP PAN)  
8. 1W-8188 [1] ELBOW  
9. 2G-6303 [1] SEAL  
10. 2G-6304 [1] STRAINER AS (PRELUBRICATION PUMP)  
11. 2R-6806 [1] CONNECTOR  
12. 2W-0694 [1] ELBOW AS-VALVE  
  1P-5274 [1] PIN-VALVE SPRING  
  7L-0811 [1] DOWEL  
  9B-0701 [2] SPRING  
  9H-2367 [1] SPRING-VALVE  
  9L-0672 [1] VALVE-CHECK  
13. 3F-2065 [1] LOCKNUT (1/2-14-THD)  
14. 3T-3735 Y [1] PUMP GP-PRELUBRICATION  
15. 4P-4927 I [1] HOSE AS  
16. 5N-8943 [1] ADAPTER  
17. 5N-9073 [1] CLIP  
18. 251-9436 [1] BRACKET AS  
19. 7K-1181 [1] STRAP-CABLE  
20. 7N-6460 [1] TUBE  
21. 9M-7357 [1] COUPLING AS  
22. 032-1267 [1] CONNECTOR (STRAIGHT)  
23. 150-1240 [1] SWITCH AS-PRESSURE (STARTING OIL)  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-1813 E SLEEVE (15-CM)  
  102-8802 [2] KIT-RECEPTACLE (2-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
24. 244-1546 [1] BRACKET  
25. 153-4906 [1] SEAL-O-RING  
26. 0L-1351 [2] BOLT (3/8-16X0.875-IN)  
27. 0S-1588 [3] BOLT (3/8-16X1.25-IN)  
28. 0S-1591 [2] BOLT (3/8-16X1.5-IN)  
29. 0S-1594 [4] BOLT (3/8-16X1-IN)  
30. 0S-1617 [8] BOLT (5/16-18X0.75-IN)  
31. 0T-0065 [2] BOLT (3/8-16X3.5-IN)  
32. 1A-5822 [4] BOLT (1/2-13X2.75-IN)  
33. 2B-2694 [4] BOLT (5/16-18X2-IN)  
34. 2B-2695 [2] BOLT (5/16-18X0.875-IN)  
35. 4P-7581 [1] CLIP (LADDER)  
36. 5M-2894 [12] WASHER-HARD (10.2X18.5X2.5-MM THK)  
37. 5P-5846 [2] SEAL-O-RING  
38. 5P-9890 [4] SEAL-O-RING  
39. 6V-5100 [2] SEAL-O-RING  
40. 7X-7731 [1] PLUG-PIPE (3/4-14-THD)  
41. 9M-1974 [6] WASHER-HARD (8.8X16X2-MM THK)  
42. 9S-8752 [3] NUT-FULL (3/8-16-THD)  
  E   ORDER BY THE CENTIMETER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

#SEBP35550167
 

249-5262: PUMP & LINES GP-PRELUBRICATION

249-5262 PUMP & LINES GP-PRELUBRICATION -DEEP PAN
S/N PTM1-UP
Type 2
AN ATTACHMENT
i02718395 SEBP3555
2495262 PUMP & LINES GP-PRELUBRICATION Parts scheme
  For full view, you need register

Parts for your 3512B GENERATOR SET:

Pos. Part No Qty Parts name Comments
1. 1M-3381 [4] SPACER (0.438X0.75X1-IN THK)  
2. 1N-3872 [2] SUPPORT  
3. 1W-3942 [1] ELBOW  
4. 1W-3943 [1] COUPLING  
5. 1W-3944 [1] FLANGE  
6. 1W-4257 [1] BRACKET AS  
  4K-9097 [2] NUT-WELD (5/16-18-THD)  
7. 1W-4820 [1] HOSE AS  
8. 1W-8188 [1] ELBOW  
9. 2G-6303 [1] SEAL  
10. 2G-6304 [1] STRAINER AS (PRELUBRICATION PUMP)  
11. 2R-6806 [1] CONNECTOR  
12. 2W-0694 [1] ELBOW AS-VALVE  
  1P-5274 [1] PIN-VALVE SPRING  
  7L-0811 [1] DOWEL  
  9B-0701 [2] SPRING  
  9H-2367 [1] SPRING-VALVE  
  9L-0672 [1] VALVE-CHECK  
13. 4P-4890 [1] NUT-SPECIAL (1/2-14-THD)  
14. 302-8729 CY [1] PUMP GP-PRELUBRICATION  
15. 4P-4927 I [1] HOSE AS  
16. 5N-8943 [1] ADAPTER  
17. 5N-9073 [1] CLIP  
18. 251-9436 [1] BRACKET AS  
19. 7K-1181 [1] STRAP-CABLE  
20. 7N-6460 [1] TUBE  
21. 9M-7357 [1] COUPLING AS  
22. 032-1267 [1] CONNECTOR (STRAIGHT)  
23. 448-5598 [1] SWITCH AS-PRESSURE (LUBE OIL)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-1813 E SLEEVE (15-CM)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
24. 244-1546 [1] BRACKET  
25. 153-4906 [1] SEAL-O-RING  
26. 0L-1351 [2] BOLT (3/8-16X0.875-IN)  
27. 0S-1588 [3] BOLT (3/8-16X1.25-IN)  
28. 0S-1591 [2] BOLT (3/8-16X1.5-IN)  
29. 0S-1594 [4] BOLT (3/8-16X1-IN)  
30. 0S-1617 [8] BOLT (5/16-18X0.75-IN)  
31. 0T-0065 [2] BOLT (3/8-16X3.5-IN)  
32. 1A-5822 [4] BOLT (1/2-13X2.75-IN)  
33. 2B-2694 [4] BOLT (5/16-18X2-IN)  
34. 2B-2695 [2] BOLT (5/16-18X0.875-IN)  
35. 4P-7581 [1] CLIP (LADDER)  
36. 5M-2894 [12] WASHER-HARD (10.2X18.5X2.5-MM THK)  
37. 5P-5846 [2] SEAL-O-RING  
38. 112-3540 [4] SEAL-O-RING  
39. 6V-5100 [2] SEAL-O-RING  
40. 7X-7731 [1] PLUG-PIPE (3/4-14-THD)  
41. 9M-1974 [6] WASHER-HARD (8.8X16X2-MM THK)  
42. 9S-8752 [3] NUT-FULL (3/8-16-THD)  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

#SEBP35550168
 

4P-5638: PUMP GP-ENGINE OIL

4P-5638 PUMP GP-ENGINE OIL -2-SECTION GEAR
S/N 1GZ1-UP
PART OF 8N-6152 PUMP GP-ENGINE OIL
i00091534 SEBP3555
4P5638 PUMP GP-ENGINE OIL Parts scheme
  For full view, you need register

Parts for your 3512B GENERATOR SET:

Pos. Part No Qty Parts name Comments
1. 0S-1590 [9] BOLT (3/8-16X2-IN)  
2. 5M-2894 [11] WASHER-HARD (10.2X18.5X2.5-MM THK)  
3. 7N-5057 [1] GASKET  
4. 7W-0050 [1] COVER AS-PUMP  
5. 1W-6005 [3] BUSHING  
6. 4M-3248 [2] DOWEL-HOLLOW  
7. 2W-5479 [2] SHAFT AS-PUMP  
8. 7F-1866 [2] BOLT (3/8-16X3-IN)  
9. 4P-5637 [1] BODY AS-OIL PUMP  
10. 1W-6005 [3] BUSHING  
11. 1N-4637 [1] COVER AS-PUMP  
12. 7N-2043 [2] DOWEL  
13. 7N-5449 [1] SPOOL-PRESSURE RELIEF  
14. 0S-1585 [6] BOLT (1/2-13X1.5-IN)  
15. 2S-2760 [1] SPRING  
16. 2W-6618 [1] SHAFT AS-PUMP DRIVE  
17. 111-1349 [1] GASKET  
18. 7N-5049 [1] COVER-RELIEF VALVE  
 

#SEBP35550169
 

5N-6237: PUMP GP-ENGINE OIL

5N-6237 PUMP GP-ENGINE OIL -MANUAL LUBRICATION
S/N PTM1-UP
PART OF 439-7062 KIT-FUEL SYSTEM PARTS
i00385745 SEBP3555
5N6237 PUMP GP-ENGINE OIL Parts scheme
  For full view, you need register

Parts for your 3512B GENERATOR SET:

Pos. Part No Qty Parts name Comments
1. 2A-0762 [2] BOLT (1/4-20X0.625-IN)  
2. 3N-3297 [2] PIN-TAPERED  
3. 5N-6255 [1] HANDLE AS  
4. 3N-3299 B [1] GASKET SET (INCLUDES 4 GASKETS)  
   
    AVAILABLE REPAIR KIT(S):
  3N-3300 [1] KIT-PUMP (SUMP)  
    (INCLUDES VANE, SPRING, PACKING, NUT & GASKET)
  B   USE AS REQUIRED
 

Information:

Engine News
New Gasket for the Turbocharger's Water Lines {1052, 1380}
2003/11/01
New Turbocharger Compressor Cover {1052}
2004/09/01
Improved Turbocharger Groups {1052}
2004/11/01
New Oil Drain Tube for the Turbocharger {1052, 1307}
2006/01/30
Operation and Maintenance Manual
Turbocharger - Inspect
3500 Generator Sets
Special Instruction
Installation Instructions for Turbochargers {1052}
Installation Instructions for Turbochargers {1052}
Specifications
Turbocharger Outlet Pressure Sensor
3500B Engines for Caterpillar Built Power Modules
Turbocharger Inlet Pressure Sensor
3500B Engines for Caterpillar Built Power Modules
Turbocharger
3500B Engines for Caterpillar Built Power Modules
Turbocharger
3500B Engines for Caterpillar Built Power Modules
Systems Operation
Turbocharger
3500B and 3500B High Displacement Generator Set Engines
Troubleshooting
MID 036 - CID 0273 - FMI 00 Turbo Outlet Pressure above normal
3500B and 3500B High Displacement Generator Set Engines
MID 036 - CID 0275 - FMI 03 Right Turbo Inlet Pressure open/short to +batt
3500B and 3500B High Displacement Generator Set Engines
MID 036 - CID 0275 - FMI 04 Right Turbo Inlet Pressure short to ground
3500B and 3500B High Displacement Generator Set Engines
MID 036 - CID 0275 - FMI 13 Right Turbo Inlet Pressure calibration required
3500B and 3500B High Displacement Generator Set Engines
MID 036 - CID 0276 - FMI 03 Left Turbo Inlet Pressure open/short to +batt
3500B and 3500B High Displacement Generator Set Engines
MID 036 - CID 0276 - FMI 04 Left Turbo Inlet Pressure short to ground
3500B and 3500B High Displacement Generator Set Engines
MID 036 - CID 0273 - FMI 03 Turbo Outlet Pressure open/short to +batt
3500B and 3500B High Displacement Generator Set Engines
MID 036 - CID 0273 - FMI 04 Turbo Outlet Pressure short to ground
3500B and 3500B High Displacement Generator Set Engines
MID 036 - CID 0273 - FMI 13 Turbo Outlet Pressure calibration required
3500B and 3500B High Displacement Generator Set Engines
MID 036 - CID 0276 - FMI 13 Left Turbo Inlet Pressure calibration required
3500B and 3500B High Displacement Generator Set Engines

Caterpillar Parts SIS Catalog 3512B :

LINES GP-TURBOCHARGER OIL
101-1255 LINES GP-TURBOCHARGER OIL
LINES GP-TURBOCHARGER OIL
101-1255 LINES GP-TURBOCHARGER OIL
LINES GP-TURBOCHARGER OIL
101-1255 LINES GP-TURBOCHARGER OIL
LINES GP-ENGINE OIL DRAIN
5N-9216 LINES GP-ENGINE OIL DRAIN
LINES GP-ENGINE OIL DRAIN
5N-9216 LINES GP-ENGINE OIL DRAIN
LINES GP-ENGINE OIL DRAIN
516-8266 LINES GP-ENGINE OIL DRAIN
LINES GP-ENGINE OIL DRAIN
210-6113 LINES GP-ENGINE OIL DRAIN
LINES GP-ENGINE OIL DRAIN
210-6113 LINES GP-ENGINE OIL DRAIN
MOUNTING GP-ENGINE OIL FILTER
197-3887 MOUNTING GP-ENGINE OIL FILTER
PUMP & LINES GP-PRELUBRICATION
244-1535 PUMP & LINES GP-PRELUBRICATION
PUMP & LINES GP-PRELUBRICATION
244-1535 PUMP & LINES GP-PRELUBRICATION
PUMP & LINES GP-PRELUBRICATION
244-1535 PUMP & LINES GP-PRELUBRICATION
PUMP & LINES GP-PRELUBRICATION
244-1535 PUMP & LINES GP-PRELUBRICATION
PUMP & LINES GP-PRELUBRICATION
249-5262 PUMP & LINES GP-PRELUBRICATION
PUMP & LINES GP-PRELUBRICATION
249-5262 PUMP & LINES GP-PRELUBRICATION
PUMP GP-ENGINE OIL
4P-5638 PUMP GP-ENGINE OIL

Truck sale:

Caterpillar 3512B
 
Caterpillar 3512B
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Caterpillar 3512B, mobile generator sets, Construction
182,189 
Caterpillar 3512B, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3512B, Marine Propulsion / Auxiliary Engines, Construction
 
Caterpillar 3512B, Marine Propulsion / Auxiliary Engines, Construction
- Marine Propulsion / Auxiliary Engines
ZEPPELIN POWER SYSTEMS GMBH
Caterpillar 3512B
 
Caterpillar 3512B
- Industrial engines
FOLEY EQUIPMENT COMPANY
 
190,000 
Caterpillar 3512B, Stationary Generator Sets, Construction