263-6853 FILTER GP-FUEL -LH S/N PTM1-UP Type 2 AN ATTACHMENT 3512B GENERATOR SET

FUEL SYSTEM

FILTER GP-FUEL

0. 263-6853 FILTER GP-
1. 8N-6435 FILTER GP-
2. 188-9765 FILTER GP-

FUEL SYSTEM GP

3. 439-1158 KIT-FUEL S
4. 439-7061 KIT-FUEL S
5. 439-7062 KIT-FUEL S
6. 439-7063 KIT-FUEL S

LINES GP-FUEL

7. 5N-2438 LINES GP-F
8. 136-1695 LINES GP-F

LINES GP-FUEL INJECTION

9. 101-1247 LINES GP-F
0. INFORMATION

GENERATOR SET 3512B GENERATOR SET PTM
3512B Generator Set Oil Field Land Rig PTM00001-UP SEBP3555 3512B PTM (2001)

FUEL SYSTEM

FILTER GP-FUEL

121-0470 FILTER GP-FUEL

263-6853 FILTER GP-FUEL

8N-6435 FILTER GP-PRIMARY FUEL

188-9765 FILTER GP-WATER SEP & FUEL

#SEBP35550350

263-6853: FILTER GP-FUEL

FILTER GP-FUEL

263-6853 FILTER GP-FUEL -LH
S/N PTM1-UP
Type 2
AN ATTACHMENT

i02644051 SEBP3555

For full view, you need register

Parts for your 3512B GENERATOR SET:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1N-2895	[1]	SPRING
2.	1R-0756	[5]	FILTER ELEMENT-FUEL (ADVANCED EFFICIENCY)
3.	1W-7548	[1]	TUBE AS
4.	2S-5100	[1]	VALVE-MANUAL
5.	2W-9300	[1]	COVER-FILTER HOUSING
6.	4P-0692 C	[2]	CLAMP AS
			(EACH INCLUDES)
	108-1434	[1]	GROMMET
7.	6I-3754	[1]	RETAINER-FILTER
8.	6N-4414	[1]	COVER-FILTER BASE
9.	7F-0192	[2]	BOLT (3/8-16X2-IN)
10.	8T-6766	[1]	PLUG-PIPE
11.	9Y-8389	[1]	GASKET (PRIMING PUMP/COVER)
12.	267-9690	[1]	COVER-FUEL FILTER HOUSING
13.	111-5055	[1]	BLOCK-SENSOR MOUNTING
15.	278-1776	[1]	HOUSING AS-FUEL FILTER
16.	237-2719	[1]	TUBE AS
18.	250-1498	[3]	ELBOW AS
			(EACH INCLUDES)
	6V-4589	[1]	SEAL-O-RING
	250-1497	[1]	ELBOW
19.	031-4136	[1]	TEE-FLARED
20.	0L-2070 C	[1]	BOLT (3/8-16X2.25-IN)
21.	0S-1588	[2]	BOLT (3/8-16X1.25-IN)
23.	0S-1608	[2]	BOLT (3/8-16X3.75-IN)
24.	1B-7182	[1]	BOLT (5/16-18X1.25-IN)
25.	2M-9780	[2]	SEAL-O-RING
26.	3B-1915	[8]	BOLT (3/8-16X1.375-IN)
27.	5D-5957	[2]	SEAL-O-RING
28.	5M-2894 C	[6]	WASHER-HARD (10.2X18.5X2.5-MM THK)
29.	5P-0537	[1]	WASHER-HARD (7.2X14.5X2-MM THK)
30.	6V-5048	[3]	SEAL-O-RING (FUEL FILTER)
31.	6V-5049	[1]	SEAL-O-RING
32.	7B-2742	[1]	BOLT (1/4-20X1.25-IN)
33.	8L-2746	[2]	SEAL-O-RING
34.	8L-2786	[1]	SEAL-O-RING
35.	8M-9024	[8]	WASHER-HARD (10.2X22.5X5-MM THK)
36.	9M-1974	[1]	WASHER-HARD (8.8X16X2-MM THK)
37.	9S-4182	[3]	PLUG (7/16-20-THD)
38.	9S-4185	[1]	PLUG (3/4-16-THD)
39.	9S-4190	[1]	PLUG-O-RING (7/8-14-THD)
40.	9S-4191	[1]	PLUG (9/16-18-THD)
	C		CHANGE FROM PREVIOUS TYPE

#SEBP35550351

8N-6435: FILTER GP-PRIMARY FUEL

FILTER GP-PRIMARY FUEL

8N-6435 FILTER GP-PRIMARY FUEL
S/N PTM1-UP
AN ATTACHMENT

i00156284 SEBP3555

8N6435 FILTER GP-PRIMARY FUEL Parts scheme

For full view, you need register

Parts for your 3512B GENERATOR SET:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1W-0531	[1]	BASE-PRIMARY FUEL FILTER
2.	7N-1628	[1]	NUT (3/8-24-THD)
3.	2J-0157	[1]	SEAL-O-RING
4.	1L-3769	[1]	RING-RETAINING
5.	7H-9678	[1]	RETAINER-ELEMENT
6.	2H-3429	[1]	RING-RETAINING
7.	7S-9323	[1]	SPRING
8.	8H-7202	[1]	CASE AS-FUEL FILTER
9.	9M-2342	[1]	FILTER ELEMENT-FUEL
10.	8H-2778	[1]	SEAL-RING (FUEL FILTER)

#SEBP35550352

188-9765: FILTER GP-WATER SEP & FUEL

FILTER GP-WATER SEP & FUEL

188-9765 FILTER GP-WATER SEP & FUEL
S/N PTM1-UP
AN ATTACHMENT

i04352931 SEBP3555

1889765 FILTER GP-WATER SEP & FUEL Parts scheme

For full view, you need register

Parts for your 3512B GENERATOR SET:

CATERPILLAR SIS

Part No	Qty	Parts name

		AVAILABLE REPAIR KIT(S):
134-6307	[3]	FILTER ELEMENT-FUEL (WATER SEPARATOR)
		(INCLUDES FILTER ELEMENT & SEALS)

#SEBP35550353

439-1158: KIT-FUEL SYSTEM PARTS

KIT-FUEL SYSTEM PARTS

439-1158 KIT-FUEL SYSTEM PARTS
S/N PTM1-UP
FOR USE WITH 3512B @ 1500 RPM DIESEL ENGINES USED IN PETROLEUM APPLICATIONS. TO UPGRADE THE ENGINE TO RUN BOTH DIESEL AND NATURAL GAS
FOR USE WITH REHS7866
FIELD INSTALLATION

i05339220 SEBP3555

For full view, you need register

Parts for your 3512B GENERATOR SET:

CATERPILLAR SIS

Part No	Qty	Parts name
424-7719 Y	[1]	ACTUATOR GP-ELECTRONIC

		(ABOVE PARTS ARE PART OF ACTUATOR GROUP)

416-2189	[1]	TUBE AS

		(ABOVE PARTS ARE FOR USE WITH LOWER HEATING VALUE FUEL)

0L-2070	[2]	BOLT (3/8-16X2.25-IN)
0S-1594	[4]	BOLT (3/8-16X1-IN)
0S-1585	[1]	BOLT (1/2-13X1.5-IN)
0S-1590	[1]	BOLT (3/8-16X2-IN)
165-3929	[4]	BOLT (3/8-16X1.5-IN)
2B-0947	[2]	BOLT (1/2-13X2.25-IN)
379-5142	[1]	BRACKET
386-3398	[1]	BRACKET
196-5053	[4]	CLIP (TAB)
196-5052	[4]	CLIP (SLOT)
7C-9597	[2]	FLANGE
9S-9635	[1]	JOINT AS-TUBE
1F-7958	[2]	NUT-FULL (1/2-13-THD)
9S-8752	[3]	NUT-FULL (3/8-16-THD)
4W-0531	[4]	RETAINER
4W-0530	[2]	RING-RETAINING
6J-2680	[3]	SEAL-O-RING
8T-1919	[4]	SEAL-O-RING
2V-4387	[1]	SPACER (10.312X25.4X23.11-MM THK)
393-5644	[1]	TUBE
393-5645	[1]	TUBE
5M-2894	[5]	WASHER-HARD (10.2X18.5X2.5-MM THK)
7D-1649	[5]	WASHER-HARD (13.5X32X5-MM THK)
9X-6458	[10]	WASHER-HARD (10.2X22.5X3-MM THK)

		(ABOVE PARTS ARE PART OF 393-5643 TEMPERATURE REGULATOR GROUP)

1C-2251	[6]	BOLT (3/8-16X1.87-IN)
1A-2029	[36]	BOLT (3/8-16X1.125-IN)
0S-1588	[4]	BOLT (3/8-16X1.25-IN)
117-0066	[1]	BRACKET-MOUNTING
374-1513	[4]	COVER-CAMSHAFT
349-6052	[2]	COVER-CAMSHAFT
8N-9993	[1]	COVER-CAMSHAFT
2W-0752	[4]	GASKET
277-5833	[6]	SEAL
5L-5840	[6]	WASHER (9.25X16.92X1.83-MM THK)
5M-2894	[36]	WASHER-HARD (10.2X18.5X2.5-MM THK)

		(ABOVE PARTS ARE PART OF 390-4500 CYLINDER BLOCK COVER GROUP)

1A-8537 J	[2]	BOLT (5/8-11X2.75-IN)
2B-0947 J	[8]	BOLT (1/2-13X2.25-IN)
3B-1915 J	[2]	BOLT (3/8-16X1.375-IN)
8S-9092 J	[6]	BOLT (5/8-11X2.25-IN)
0S-1585 HJ	[10]	BOLT (1/2-13X1.5-IN)
0S-1591 H	[8]	BOLT (3/8-16X1.5-IN)
3B-1915 H	[6]	BOLT (3/8-16X1.375-IN)
2A-4639 HJ	[8]	BOLT (3/8-16X1.625-IN)
8S-9191 HJ	[4]	BOLT (3/8-16X4-IN)
5B-5620 HJ	[3]	BOLT (5/16-18X2.125-IN)
165-3929 J	[10]	BOLT (3/8-16X1.5-IN)
165-3931 J	[2]	BOLT (3/8-16X1.75-IN)
417-5543 H	[1]	BRACKET AS
440-4786 J	[1]	BRACKET AS
450-3143 J	[1]	BRACKET AS
397-8632 HJ	[1]	BRACKET
397-8629 H	[2]	BRACKET
440-4792 J	[1]	BRACKET
2L-6055 H	[1]	CAP-PIPE
4P-8134 HJ	[1]	CLIP (LADDER)
211-5237 J	[1]	CONNECTOR
293-8396 HJ	[1]	CORE AS-FUEL COOLER
122-8905 H	[2]	ELBOW (90-DEG)
122-8905 J	[1]	ELBOW (90-DEG)
7X-7951 H	[3]	ELBOW-UNION
3B-7296 H	[3]	FITTING (NIPPLE)
6N-4543 H	[1]	FITTING
2M-4108 H	[2]	GASKET
105-8180 HJ	[1]	GASKET
293-4056 J	[2]	GASKET
420-8789 J	[2]	GASKET
425-3549 J	[2]	GASKET
3B-7286 H	[1]	NIPPLE-PIPE
5S-0003 HJ	[3]	NUT (5/16-18-THD)
1F-7958 J	[8]	NUT-FULL (1/2-13-THD)
4K-0367 J	[8]	NUT-FULL (5/8-11-THD)
9S-8752 HJ	[10]	NUT-FULL (3/8-16-THD)
265-5255 H	[2]	PLATE
9X-6138 H	[1]	PLUG-PIPE
210-2007 HY	[1]	REGULATOR GP-GAS PRESSURE
435-0888 J	[1]	REGULATOR GP-GAS PRESSURE
447-7206 HJ	[2]	SEAL-O-RING
6L-7322 H	[1]	TEE-PIPE
397-8628 H	[1]	TUBE AS
397-8631 H	[1]	TUBE AS
440-4788 J	[1]	TUBE AS
440-4791 J	[1]	TUBE AS
440-4794 J	[1]	TUBE AS
450-2989 J	[1]	TUBE AS
122-0089 HY	[1]	VALVE GP-SOLENOID
489-1434 JY	[1]	VALVE GP-SOLENOID (24-VOLT)
5M-2894 HJ	[20]	WASHER-HARD (10.2X18.5X2.5-MM THK)
5P-8245 HJ	[6]	WASHER-HARD (13.5X25.5X3-MM THK)
5P-8247 J	[16]	WASHER-HARD (17X32X3.5-MM THK)
9M-1974 HJ	[6]	WASHER-HARD (8.8X16X2-MM THK)
7D-1649 H	[2]	WASHER-HARD (13.5X32X5-MM THK)
7D-1649 J	[18]	WASHER-HARD (13.5X32X5-MM THK)
9X-6458 HJ	[16]	WASHER-HARD (10.2X22.5X3-MM THK)

		(ABOVE PARTS MARKED H ARE PART OF 397-8633 GAS PRESSURE REGULATOR GROUP)
		(ABOVE PARTS MARKED J ARE PART OF 440-4790 GAS PRESSURE REGULATOR GROUP)

165-3929 NP	[6]	BOLT (3/8-16X1.5-IN)
2A-4639 NP	[4]	BOLT (3/8-16X1.625-IN)
3B-1915 NP	[2]	BOLT (3/8-16X1.375-IN)
165-3931 P	[2]	BOLT (3/8-16X1.75-IN)
7K-1402 NP	[2]	BRACKET
391-2202 NP	[1]	BRACKET
393-5652 NP	[1]	BRACKET
442-6223 NP	[1]	BRACKET
442-6224 NP	[1]	BRACKET
6V-1581 NP	[2]	CLIP (SLOT)
6V-1582 NP	[2]	CLIP (TAB)
7K-1401 NP	[2]	CLIP
105-8180 NP	[1]	GASKET
255-6464 NP	[2]	JOINT AS
216-2285 NP	[1]	JOINT AS-TUBE
9S-8752 NP	[14]	NUT-FULL (3/8-16-THD)
6V-4368 NP	[2]	SEAL-O-RING
442-5389 N	[1]	TUBE AS
442-5391 NP	[1]	TUBE AS
416-2189 P	[2]	TUBE AS
442-5390 P	[1]	TUBE AS
5M-2894 NP	[12]	WASHER-HARD (10.2X18.5X2.5-MM THK)
9X-6458 NP	[16]	WASHER-HARD (10.2X22.5X3-MM THK)

		(ABOVE PARTS MARKED N ARE PART OF 393-5650 FUEL LINES GROUP)
		(ABOVE PARTS MARKED P ARE PART OF 442-9595 & 442-9596 FUEL LINES GROUP)

5N-2126	[12]	CONNECTOR (THERMOCOUPLE)
318-1181 Y	[1]	SENSOR GP-SPEED (MAGNETIC)
383-2990	[12]	SENSOR GP-TEMPERATURE (THERMOCOUPLE)
461-1622 Y	[1]	HARNESS GP-WIRING
9X-0262	[1]	ADAPTER
261-6847	[2]	ADAPTER
330-9739	[1]	ADAPTER
335-3999	[2]	CONNECTOR
353-5440	[2]	ADAPTER
353-5441	[5]	ADAPTER-ELBOW
0L-1352	[1]	BOLT (3/8-16X3.25-IN)
0S-0509	[1]	BOLT (3/8-16X0.75-IN)
0S-1585	[1]	BOLT (1/2-13X1.5-IN)
0S-1588	[1]	BOLT (3/8-16X1.25-IN)
0S-1594	[11]	BOLT (3/8-16X1-IN)
0S-1608	[1]	BOLT (3/8-16X3.75-IN)
1A-2029	[7]	BOLT (3/8-16X1.125-IN)
1A-9579	[25]	BOLT (5/16-18X1.5-IN)
3B-1915	[6]	BOLT (3/8-16X1.375-IN)
034-3557	[3]	BOLT-LOCKING (3/8-16X1.125-IN)
165-3929	[5]	BOLT (3/8-16X1.5-IN)
165-3931	[16]	BOLT (3/8-16X1.75-IN)
4P-7068	[1]	BRACKET
3A-3692	[2]	CLIP
4P-7429	[4]	CLIP (LADDER)
4P-7581	[23]	CLIP (LADDER)
4P-8134	[43]	CLIP (LADDER)
6V-1582	[1]	CLIP (TAB)
6V-1581	[1]	CLIP (SLOT)
132-5789	[7]	CLIP (LADDER)
294-3313	[1]	CLIP (LADDER)
352-3968	[1]	CLIP (LADDER)(LADDER)
001-9440	[1]	CONNECTOR
353-5439	[1]	CONNECTOR
5P-3426	[1]	ELBOW
6V-9330	[2]	ELBOW
437-7386	[1]	FILM-IDENTIFICATION (CIRCUIT BREAKER)
111-3684	[1]	HOSE AS
9S-8752	[16]	NUT-FULL (3/8-16-THD)
6V-5048	[1]	SEAL-O-RING
6V-9028	[2]	SEAL-O-RING
214-7566	[7]	SEAL-O-RING
214-7568	[2]	SEAL-O-RING
228-7100	[8]	SEAL-O-RING
228-7101	[1]	SEAL-O-RING
238-5080	[4]	SEAL-O-RING
195-2431	[6]	SENSOR GP-DETONATION
		(EACH INCLUDES)
8T-8730	[3]	SOCKET-CONNECTOR (16-GA TO 18-GA)
8T-8731	[1]	PLUG-CONNECTOR (3-PIN)
9X-1813 E		SLEEVE (16-CM)
256-6453	[4]	SENSOR-TEMPERATURE (2-PIN)
415-2432	[2]	SENSOR GP-TEMPERATURE (EXHAUST)
305-6873	[1]	SENSOR GP-PRESSURE
320-3060	[4]	SENSOR GP-PRESSURE
320-3061	[1]	SENSOR GP-PRESSURE
320-3063	[4]	SENSOR GP-PRESSURE
4S-5719	[4]	SPACER (10.31X25X12.7-MM THK)
302-3908	[13]	SPACER (11X20X30-MM THK)
7K-1181	[85]	STRAP-CABLE
6L-4428	[4]	STUD-TAPERLOCK (3/8-16X4.01-IN)
5M-2894	[49]	WASHER-HARD (10.2X18.5X2.5-MM THK)
7D-1649	[1]	WASHER-HARD (13.5X32X5-MM THK)
8M-9024	[5]	WASHER-HARD (10.2X22.5X5-MM THK)
9M-1974	[25]	WASHER-HARD (8.8X16X2-MM THK)
9X-6458	[8]	WASHER-HARD (10.2X22.5X3-MM THK)

		(ABOVE PARTS ARE PART OF 415-7978 ENGINE WIRING GROUP)

353-8089 Y	[1]	CONTROL GP-UNPROGRAMMED
0T-0065	[4]	BOLT (3/8-16X3.5-IN)
1B-9575	[4]	BOLT (5/16-18X1.56-IN)
1D-4540	[4]	BOLT (5/16-18X2.75-IN)
231-7070	[1]	BRACKET
417-6011	[1]	CONTROL GP-UNPROGRAMMED
8T-9655	[8]	MOUNT-ISOLATION
155-0576	[8]	MOUNT-ISOLATION
2V-4387	[4]	SPACER (10.312X25.4X23.11-MM THK)
6I-1418	[8]	SPACER (8.2X12.7X28.7-MM THK)
190-4885	[4]	SPACER (11X22X50-MM THK)
9M-1974	[2]	WASHER-HARD (8.8X16X2-MM THK)
9N-0869	[8]	WASHER-HARD (8.8X25.5X2-MM THK)
9X-6458	[4]	WASHER-HARD (10.2X22.5X3-MM THK)

		(ABOVE PARTS ARE PART OF 373-1527 ELECTRONIC CONTROL & MOUNTING GROUP)

165-3931	[1]	BOLT (3/8-16X1.75-IN)
4L-6454	[4]	BOLT (3/8-16X1-IN)
0S-1588	[3]	BOLT (3/8-16X1.25-IN)
0S-1594	[1]	BOLT (3/8-16X1-IN)
384-7876	[1]	BRACKET
6B-1628	[1]	BUSHING-REDUCER
5P-9297	[5]	CLIP (LOOP)(SLOT)
6V-0267	[3]	CLIP (TAB)
6V-0268	[3]	CLIP (SLOT)
6V-3265	[1]	CLIP (SLOT)
8C-6866	[3]	CONNECTOR
8C-6867	[1]	CONNECTOR
8C-6870	[1]	CONNECTOR
3B-6555	[1]	ELBOW
4B-9030	[1]	ELBOW
318-2485	[1]	GASKET
398-3728 I	[1]	HOSE AS
419-1798 I	[1]	HOSE AS
005-8615	[1]	NIPPLE-PIPE
9S-8752	[4]	NUT-FULL (3/8-16-THD)
318-2484	[1]	ORIFICE
265-5254	[2]	PLATE
8T-6761	[1]	PLUG-PIPE (1-11-1/2 NPT THD)
204-6707	[1]	REGULATOR-WATER TEMPERATURE (129-DEG F)
3S-9643	[2]	SEAL-LIP TYPE
6V-1454	[2]	SEAL-O-RING
4F-7391	[2]	SEAL-O-RING
4J-5477	[4]	SEAL-O-RING
6V-8397	[1]	SEAL-O-RING
1L-4031	[1]	TEE-SERVICE
196-9420	[1]	VALVE-BALL
5M-2894	[3]	WASHER-HARD (10.2X18.5X2.5-MM THK)
8T-4896	[4]	WASHER-HARD (10.2X18.5X2.5-MM THK)
9X-6458	[6]	WASHER-HARD (10.2X22.5X3-MM THK)

		(ABOVE PARTS ARE PART OF 398-3729 WATER LINES GROUP)

165-3931	[2]	BOLT (3/8-16X1.75-IN)
0T-0055	[4]	BOLT (3/8-16X4.25-IN)
1A-1460	[2]	BOLT (1/2-13X2-IN)
2A-4639	[4]	BOLT (3/8-16X1.625-IN)
2B-2695	[4]	BOLT (5/16-18X0.875-IN)
3B-1915	[8]	BOLT (3/8-16X1.375-IN)
6H-1717	[11]	BOLT (1/2-13X1.125-IN)
386-3396	[2]	BRACKET
386-3397	[2]	BRACKET
388-2132	[1]	BRACKET
388-2133	[1]	BRACKET
382-5499	[1]	BRACKET AS-SUPPORT (LH)
382-5500	[1]	BRACKET AS-SUPPORT (RH)
5P-3860	[8]	CLAMP-HOSE
162-2177	[4]	HOSE
2K-4973	[8]	LOCKNUT (3/8-16-THD)
5S-0003	[4]	NUT (5/16-18-THD)
1F-7958	[2]	NUT-FULL (1/2-13-THD)
9S-8752	[10]	NUT-FULL (3/8-16-THD)
5G-4313	[8]	SPACER (10.34X15.88X12-MM THK)
7N-6986	[2]	SUPPORT
393-5647	[1]	TUBE AS
393-5648	[1]	TUBE AS
197-9733	[4]	U-BOLT
5M-2894	[12]	WASHER-HARD (10.2X18.5X2.5-MM THK)
9M-1974	[4]	WASHER-HARD (8.8X16X2-MM THK)
7D-1649	[15]	WASHER-HARD (13.5X32X5-MM THK)
9X-6458	[30]	WASHER-HARD (10.2X22.5X3-MM THK)
165-3929	[4]	BOLT (3/8-16X1.5-IN)
1A-2029	[14]	BOLT (3/8-16X1.125-IN)

		(ABOVE PARTS ARE PART OF 391-3079 & 393-5646 AIR CLEANER MOUNTING GROUPS, 393-5642 PRECLEANER GROUP)

6V-4368	[2]	SEAL-O-RING
393-5651	[2]	TUBE AS

		(ABOVE PARTS ARE PART OF FUEL MIXER GROUP 416-2193)
E		ORDER BY THE CENTIMETER
H		PARTS MARKED H FOR USE WITH PIPE THREADS
I		REFER TO HYDRAULIC INFORMATION SYSTEM
J		PARTS MARKED J FOR USE WITHOUT PIPE THREADS
N		PARTS MARKED N ARE PART OF 393-5650 FUEL LINES GROUP
P		PARTS MARKED P ARE PART OF 442-9595 & 442-9596 FUEL LINES GROUP
R		REMANUFACTURED PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

#SEBP35550354

439-7061: KIT-FUEL SYSTEM PARTS

KIT-FUEL SYSTEM PARTS

439-7061 KIT-FUEL SYSTEM PARTS
S/N PTM1-UP
FOR USE WITH 3521B @ 1500RPM DIESEL ENGINES USED IN PETROLEUM APPLICATIONS. TO UPGRADE THE ENGINE TO RUN BOTH DIESEL AND NATURAL GAS
FIELD INSTALLATION

i05339222 SEBP3555

For full view, you need register

Parts for your 3512B GENERATOR SET:

CATERPILLAR SIS

Part No	Qty	Parts name
0S-1588	[3]	BOLT (3/8-16X1.25-IN)
3B-7764	[1]	BUSHING (REDUCING)
6V-0267	[1]	CLIP (TAB)
6V-0268	[1]	CLIP (SLOT)
174-5907	[1]	CLIP (LOOP)(LOOP)
8C-6866	[1]	CONNECTOR
2T-2305	[1]	ELBOW (90-DEG)
3B-7738	[1]	FITTING
8C-6905	[1]	FITTING-REDUCER
3R-1059	[1]	FLANGE
9L-1480	[1]	GASKET
301-7944 I	[1]	HOSE AS
9S-8752	[1]	NUT-FULL (3/8-16-THD)
8T-6758	[1]	PLUG-PIPE (1/4-18-THD)
4J-5477	[1]	SEAL-O-RING
6V-8397	[1]	SEAL-O-RING
366-4746	[1]	SENSOR GP-PARTICLE (METAL)
129-2915	[1]	KIT-PARTICLE DETECTOR
		(INCLUDES GRID & SEALS)
004-5933	[1]	TEE-PIPE
224-1228	[1]	VALVE-BALL
5M-2894	[2]	WASHER-HARD (10.2X18.5X2.5-MM THK)
9X-6458	[2]	WASHER-HARD (10.2X22.5X3-MM THK)

		FOR A LIST OF RELATED PARTS THAT REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

		HTTPS://DEALER.CAT.COM/RELATED
I		REFER TO HYDRAULIC INFORMATION SYSTEM

#SEBP35550355

439-7062: KIT-FUEL SYSTEM PARTS

KIT-FUEL SYSTEM PARTS

439-7062 KIT-FUEL SYSTEM PARTS
S/N PTM1-UP
FOR USE WITH 3512 @ 1500RPM DIESEL ENGINES USED IN PETROLEUM APPLICATIONS. TO RUN BOTH DIESEL AND NATURAL GAS
FIELD INSTALLATION

i05339238 SEBP3555

For full view, you need register

Parts for your 3512B GENERATOR SET:

CATERPILLAR SIS

Part No	Qty	Parts name
5N-6237 Y	[1]	PUMP GP-ENGINE OIL (MANUAL LUBRICATION)

200-8272	[1]	BRACKET AS
246-7844 I	[1]	HOSE AS
391-6014 I	[1]	HOSE AS

7N-6569	[1]	ADAPTER
0S-1587	[2]	BOLT (1/2-13X1.75-IN)
0S-1590	[1]	BOLT (3/8-16X2-IN)
4L-6454	[2]	BOLT (3/8-16X1-IN)
7B-2742	[4]	BOLT (1/4-20X1.25-IN)
6V-1889	[1]	CLIP (LOOP)(LOOP)
8C-6874	[2]	CONNECTOR
9X-2398	[1]	ELBOW
003-9163	[1]	ELBOW (90-DEG)
117-3033	[1]	ELBOW
211-8759	[1]	ELBOW
201-0578	[1]	FITTING
3B-7745	[2]	NIPPLE-PIPE
1F-7958	[2]	NUT-FULL (1/2-13-THD)
9S-8752	[1]	NUT-FULL (3/8-16-THD)
3H-3433	[1]	PIN-SPRING
6T-7034	[1]	PIN-VALVE SPRING
7X-7731	[1]	PLUG-PIPE (3/4-14-THD)
5P-5846	[1]	SEAL-O-RING
6V-9746	[3]	SEAL-O-RING
7J-9108	[1]	SEAL-O-RING
2B-0941	[1]	SPACER (10.5X19X19-MM THK)
9H-2367	[1]	SPRING-VALVE
1N-8559	[1]	TEE-SERVICE
8C-1358	[2]	VALVE-BALL
9L-0672	[1]	VALVE-CHECK
5M-2894	[2]	WASHER-HARD (10.2X18.5X2.5-MM THK)
5P-0537	[8]	WASHER-HARD (7.2X14.5X2-MM THK)
7D-1649	[4]	WASHER-HARD (13.5X32X5-MM THK)

		FOR A LIST OF RELATED PARTS THAT REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

		HTTPS://DEALER.CAT.COM/RELATED
I		REFER TO HYDRAULIC INFORMATION SYSTEM
Y		SEPARATE ILLUSTRATION

#SEBP35550356

439-7063: KIT-FUEL SYSTEM PARTS

KIT-FUEL SYSTEM PARTS

439-7063 KIT-FUEL SYSTEM PARTS
S/N PTM1-UP
FOR USE WITH 3512B @ 1500 RPM DIESEL ENGINES USED IN PETROLEUM APPLICATIONS. TO UPGRADE THE ENGINE TO RUN BOTH DIESEL AND NATURAL GAS
FIELD INSTALLATION

i05339239 SEBP3555

For full view, you need register

Parts for your 3512B GENERATOR SET:

CATERPILLAR SIS

Part No	Qty	Parts name
307-9372 I	[1]	HOSE AS
397-9421 I	[1]	HOSE AS

0S-1585	[2]	BOLT (1/2-13X1.5-IN)
1B-2790	[2]	BOLT (5/16-18X1.375-IN)
118-1656	[1]	BUSHING-REDUCER
184-7211	[2]	CLIP
8C-6875	[4]	CONNECTOR
4B-9030	[1]	ELBOW
006-5707	[1]	ELBOW-PIPE
122-3201	[1]	NIPPLE-PIPE
5S-0003	[2]	NUT (5/16-18-THD)
1F-7958	[2]	NUT-FULL (1/2-13-THD)
8T-6762	[1]	PLUG-PIPE (1/2-14-THD)
5K-9090	[4]	SEAL-O-RING
7G-1239	[2]	SPACER (10.5X19X4.5-MM THK)
1L-4031	[1]	TEE-SERVICE
196-9420	[2]	VALVE-BALL
7D-1649	[4]	WASHER-HARD (13.5X32X5-MM THK)
9M-1974	[4]	WASHER-HARD (8.8X16X2-MM THK)

		FOR A LIST OF RELATED PARTS THAT REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

		HTTPS://DEALER.CAT.COM/RELATED
I		REFER TO HYDRAULIC INFORMATION SYSTEM

#SEBP35550357

5N-2438: LINES GP-FLEXIBLE FUEL

LINES GP-FLEXIBLE FUEL

5N-2438 LINES GP-FLEXIBLE FUEL
S/N PTM1-UP
AN ATTACHMENT

i00384663 SEBP3555

5N2438 LINES GP-FLEXIBLE FUEL Parts scheme

For full view, you need register

Parts for your 3512B GENERATOR SET:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3N-6504 I	[1]	HOSE AS
2.	8N-1186 I	[1]	HOSE AS
3.	5F-5990 B	[2]	CLIP
	B		USE AS REQUIRED
	I		REFER TO HYDRAULIC INFORMATION SYSTEM

#SEBP35550358

136-1695: LINES GP-FUEL

LINES GP-FUEL

136-1695 LINES GP-FUEL -LH
S/N PTM1-UP
AN ATTACHMENT

i00542062 SEBP3555

For full view, you need register

Parts for your 3512B GENERATOR SET:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	250-1498	[1]	ELBOW AS
	6V-4589	[1]	SEAL-O-RING
	250-1497	[1]	ELBOW
3.	5P-4295	[1]	CLIP
4.	1A-2029	[1]	BOLT (3/8-16X1.125-IN)
5.	9X-6458	[2]	WASHER-HARD (10.2X22.5X3-MM THK)
6.	061-8248	[1]	UNION-FLARED
7.	6D-4244	[2]	CLIP (LOOP)
8.	5M-2894	[2]	WASHER-HARD (10.2X18.5X2.5-MM THK)
9.	7W-1839 I	[1]	HOSE AS
10.	9M-1974	[2]	WASHER-HARD (8.8X16X2-MM THK)
11.	1A-9579	[2]	BOLT (5/16-18X1.5-IN)
12.	0L-2070	[2]	BOLT (3/8-16X2.25-IN)
13.	150-4213 I	[1]	HOSE AS
14.	030-7964	[1]	ELBOW
15.	030-7972	[1]	ELBOW
16.	1S-0994	[2]	CLIP (LOOP)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM

#SEBP35550359

101-1247: LINES GP-FUEL INJECTION

LINES GP-FUEL INJECTION

101-1247 LINES GP-FUEL INJECTION
S/N 1GZ1-2666

i01208036 SEBP3555

1011247 LINES GP-FUEL INJECTION Parts scheme

For full view, you need register

Parts for your 3512B GENERATOR SET:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2V-8571 I	[1]	HOSE AS
2.	4P-0692	[18]	CLAMP AS
			(EACH INCLUDES)
	108-1434	[1]	GROMMET
3.	4P-0693	[4]	CLAMP AS
			(EACH INCLUDES)
	108-1434	[2]	GROMMET
4.	6B-6205	[2]	SPACER (0.438X0.875X1.281-IN THK)
5.	6V-4363	[1]	ELBOW
6.	7C-7677	[12]	TUBE AS
7.	7C-7678	[12]	TUBE AS
8.	7C-7682	[1]	ADAPTER-FUEL MANIFOLD (RH)
9.	7C-7683	[1]	ADAPTER-FUEL MANIFOLD (LH)
10.	7E-3921	[1]	VALVE-CHECK
11.	7W-2122	[24]	CONNECTOR-PORT
12.	8N-6210	[1]	BRACKET-LINE SUPPORT
13.	8N-6211	[1]	PLATE-LINE SUPPORT
14.	8N-6327	[1]	TUBE AS
15.	9N-4053	[1]	SPRING
16.	9X-6772	[1]	STRAP-CABLE
17.	030-7977	[1]	ELBOW
18.	111-3388	[1]	TUBE AS
19.	111-3389	[1]	TUBE AS
20.	114-5477	[1]	PLUNGER-VALVE
21.	156-9753 CY	[1]	MANIFOLD GP-FUEL (RH)
22.	156-9754 CY	[1]	MANIFOLD GP-FUEL (LH)
23.	174-7088	[1]	HOSE AS
24.	237-2712	[1]	TUBE AS
25.	237-2713	[1]	TUBE AS
26.	238-5080	[1]	SEAL-O-RING
27.	250-1496	[1]	ELBOW
28.	386-6229	[2]	ELBOW AS
			(EACH INCLUDES)
	238-5081	[1]	SEAL-O-RING
	250-1497	[1]	ELBOW
29.	030-7972	[1]	ELBOW
30.	030-7982	[1]	UNION-FLARED
31.	0L-2070	[5]	BOLT (3/8-16X2.25-IN)
32.	0S-0509	[1]	BOLT (3/8-16X0.75-IN)
33.	0S-1590	[1]	BOLT (3/8-16X2-IN)
34.	0S-1594	[1]	BOLT (3/8-16X1-IN)
35.	0T-0055	[1]	BOLT (3/8-16X4.25-IN)
36.	0T-0065	[3]	BOLT (3/8-16X3.5-IN)
37.	1D-4539	[1]	BOLT (5/16-18X2.5-IN)
38.	1D-4541	[1]	BOLT (5/16-18X3-IN)
39.	250-1499	[1]	TEE
40.	2P-7636	[1]	CONNECTOR (3/4-16 STR-THD)
41.	5M-2894	[12]	WASHER-HARD (10.2X18.5X2.5-MM THK)
42.	5P-4295	[1]	CLIP
43.	5P-4318	[1]	ELBOW
44.	5S-0003 C	[1]	NUT (5/16-18-THD)
45.	238-5081	[7]	SEAL-O-RING
46.	214-7566	[1]	SEAL-O-RING
47.	214-7568	[25]	SEAL-O-RING
48.	7K-3377	[2]	PIPE
49.	7N-6806	[4]	SEAL-RECTANGULAR
50.	9M-1974 C	[3]	WASHER-HARD (8.8X16X2-MM THK)
51.	9M-4584	[2]	CONNECTOR
52.	9S-4182	[1]	PLUG (7/16-20-THD)
53.	9S-4191	[1]	PLUG (9/16-18-THD)
54.	9S-8752	[1]	NUT-FULL (3/8-16-THD)
55.	9X-6458	[1]	WASHER-HARD (10.2X22.5X3-MM THK)
58.	0S-1590 B	[2]	BOLT (3/8-16X2-IN)
59.	0T-0065 B	[1]	BOLT (3/8-16X3.5-IN)
60.	5M-2894 B	[3]	WASHER-HARD (10.2X18.5X2.5-MM THK)
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	Y		SEPARATE ILLUSTRATION