ELECTRICAL AND STARTING SYSTEM
HEATER GPINDICATOR GP
ELECTRONICS GP-MACHINE
LIGHTING GP
ELECTRICAL AND STARTING SYSTEM
HEATER GP
#SEBP35670150
219-3270: HEATER GP-JACKET WATER
219-3270 HEATER GP-JACKET WATER
S/N SLA1-UP
240 VOLT-1000 WATT
PART OF 217-2290 HEATER GP-JACKET WATER
AN ATTACHMENT
S/N SLA1-UP
240 VOLT-1000 WATT
PART OF 217-2290 HEATER GP-JACKET WATER
AN ATTACHMENT
For full view, you need register
Parts for your TH220B TELEHANDLER:
CATERPILLAR SIS#SEBP35670151
219-3272: HEATER GP-JACKET WATER
219-3272 HEATER GP-JACKET WATER
S/N SLA1-UP
120 VOLT-1000 WATT
PART OF 217-2289 HEATER GP-JACKET WATER
AN ATTACHMENT
S/N SLA1-UP
120 VOLT-1000 WATT
PART OF 217-2289 HEATER GP-JACKET WATER
AN ATTACHMENT
For full view, you need register
Parts for your TH220B TELEHANDLER:
CATERPILLAR SIS#SEBP35670152
209-4897: INDICATOR GP-LOAD
For full view, you need register
Parts for your TH220B TELEHANDLER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [1] | STRAP-CABLE | |
| 2. | 215-7482 | [1] | PLATE | |
| 3. | 227-4455 | [1] | SENSOR AS (LOAD INDICATOR) | |
| 9X-3402 | [2] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2262 | [1] | WEDGE-PLUG LOCK (4-PIN) | ||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 4. | 117-7640 | [1] | CLAMP | |
| 5. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 6. | 8T-4171 M | [1] | BOLT (M6X1X12-MM) | |
| 7. | 8T-4191 M | [2] | BOLT (M10X1.5X16-MM) | |
| 8. | 8T-4205 | [1] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 9. | 8T-0271 M | [2] | BOLT-SOCKET HEAD (M10X1.5X35-MM) | |
| 10. | 235-3408 | [2] | SPACER (10.2X16X14-MM THK) | |
| M | METRIC PART | |||
#SEBP35670153
209-4897: INDICATOR GP-LOAD
For full view, you need register
Parts for your TH220B TELEHANDLER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [2] | STRAP-CABLE | |
| 2. | 242-1741 C | [1] | SENSOR AS-POSITION (LOAD INDICATOR) | |
| 3. | 096-4840 C | [1] | CLIP | |
| 4. | 8T-4171 M | [1] | BOLT (M6X1X12-MM) | |
| 5. | 8T-4186 CM | [2] | BOLT (M10X1.5X40-MM) | |
| 6. | 8T-4205 | [1] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP35670154
227-2995: INSTALLATION AR-SECURITY
For full view, you need register
Parts for your TH220B TELEHANDLER:
CATERPILLAR SIS#SEBP35670155
209-4910: INSTALLATION GP-SECURITY
209-4910 INSTALLATION GP-SECURITY
S/N SLA1-UP
PART OF 227-2995 INSTALLATION AR-SECURITY
AN ATTACHMENT
S/N SLA1-UP
PART OF 227-2995 INSTALLATION AR-SECURITY
AN ATTACHMENT
For full view, you need register
Parts for your TH220B TELEHANDLER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [6] | STRAP-CABLE | |
| 2. | 6I-1418 | [3] | SPACER (8.2X12.7X28.7-MM THK) | |
| 3. | 155-0576 | [6] | MOUNT-ISOLATION | |
| 4. | 213-7346 | [1] | HARNESS AS-CONTROL | |
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 5. | 213-7348 Y | [1] | ELECTRONICS GP-MACHINE (SECURITY) | |
| 6. | 222-3870 | [1] | COIL AS (FERRITE) | |
| 9X-1813 E | SLEEVE (15-CM) | |||
| 102-8802 | [2] | KIT-RECEPTACLE (2-PIN) | ||
| (EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3E-3365 | [1] | WEDGE-RECEPTACLE LOCK (2-PIN) | ||
| 7. | 6V-5219 M | [3] | BOLT (M8X1.25X40-MM) | |
| 8. | 9N-0869 | [6] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP35670156
218-3099: INSTALLATION GP-SECURITY
218-3099 INSTALLATION GP-SECURITY -KEY
S/N SLA1-UP
PART OF 227-2995 INSTALLATION AR-SECURITY
AN ATTACHMENT
S/N SLA1-UP
PART OF 227-2995 INSTALLATION AR-SECURITY
AN ATTACHMENT
For full view, you need register
Parts for your TH220B TELEHANDLER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-3371 | [1] | WEDGE-RECEPTACLE LOCK (3-PIN) | |
| 2. | 3S-2093 | [2] | STRAP-CABLE | |
| 3. | 205-0826 | [1] | FILM-INSTRUCTION (MACHINE SECURITY, CONSOLE) | |
| 4. | 205-8257 | [1] | COIL AS (EXCITER) | |
| 5. | 206-5162 | [1] | KEY AS-ELECTRONIC (SECURITY) | |
| 6. | 206-5165 | [1] | KEY AS-ELECTRONIC (SECURITY) | |
| 7. | 165-5655 | [1] | LAMP AS (24-VOLT) | |
| 186-3735 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8. | 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9. | 3E-3365 | [1] | WEDGE-RECEPTACLE LOCK (2-PIN) | |
| 10. | 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 219-6314 F | [1] | KEY RING (IDENTIFICATION) | ||
| F | NOT SHOWN | |||
#SEBP35670157
262-6619: INSTALLATION GP-SECURITY
For full view, you need register
Parts for your TH220B TELEHANDLER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 207-5262 Y | [1] | ELECTRONICS GP-MACHINE (SECURITY) | ||
| 205-8257 | [1] | COIL AS (EXCITER) | ||
| 222-3870 | [1] | COIL AS (FERRITE) | ||
| 102-8802 | [2] | KIT-RECEPTACLE (2-PIN) | ||
| (EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9X-1813 E | SLEEVE (15-CM) | |||
| 213-7346 | [1] | HARNESS AS-CONTROL | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM) | |||
| 150-6766 | [1] | PLUG AS-CONNECTOR (26-PIN) | ||
| 165-5655 | [1] | LAMP AS (24-VOLT) | ||
| 186-3735 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 099-3649 M | [3] | BOLT (M8X1.25X40-MM) | ||
| 198-5389 | [1] | FILM-IDENTIFICATION (IGNITION SWITCH) | ||
| (ON EXCITER COIL. KEY SHOULD POINT TO THE `O' WHEN IN THE OFF POSITION) | ||||
| 205-0826 | [1] | FILM-INSTRUCTION (MACHINE SECURITY, CONSOLE) | ||
| (BETWEEN LED INDICATOR & THE KEY SWITCH) | ||||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-9655 | [6] | MOUNT-ISOLATION | ||
| 6I-1418 | [3] | SPACER (8.2X12.7X28.7-MM THK) | ||
| 7K-1181 | [8] | STRAP-CABLE | ||
| 9N-0869 | [6] | WASHER-HARD (8.8X25.5X2-MM THK) | ||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP35670158
212-9347: LAMP GP-FLOOD
212-9347 LAMP GP-FLOOD -CAB-VERTICAL
S/N SLA1-UP
12-VOLT
PART OF 194-0978 LIGHTING GP-FLOOD
AN ATTACHMENT
S/N SLA1-UP
12-VOLT
PART OF 194-0978 LIGHTING GP-FLOOD
AN ATTACHMENT
For full view, you need register
Parts for your TH220B TELEHANDLER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9W-0607 | [1] | LAMP (12-VOLT, 55-WATT) | |
| 2. | 9X-4244 M | [2] | SCREW-SPECIAL (M4X1.79X25-MM) | |
| 3. | 175-4291 | [1] | BRACKET AS | |
| 4. | 202-6614 | [1] | LENS AS (FLOODLIGHT) | |
| 5. | 175-4292 | [1] | BODY AS | |
| 6. | 164-7556 | [1] | BRACKET (LAMP RETAINING) | |
| 7. | 6V-2317 M | [1] | BOLT (M8X1.25X30-MM) | |
| 8. | 5C-7261 M | [1] | NUT (M8X1.25-THD) | |
| 9. | 8T-4224 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| M | METRIC PART | |||
#SEBP35670159
236-8618: LAMP GP-HEAD
236-8618 LAMP GP-HEAD -RH DIP
S/N SLA1-UP
PART OF 222-4416 LIGHTING GP-ROADING
AN ATTACHMENT
S/N SLA1-UP
PART OF 222-4416 LIGHTING GP-ROADING
AN ATTACHMENT
For full view, you need register
Parts for your TH220B TELEHANDLER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 195-0191 Y | [1] | LAMP GP-HEAD & SIGNAL (12V)(HIGH, LOW BEAM, RH) | |
| 2. | 195-0192 Y | [1] | LAMP GP-HEAD & SIGNAL (12V)(HIGH, LOW BEAM, LH) | |
| 3. | 223-1876 | [1] | BRACKET | |
| 4. | 226-1605 | [2] | HARNESS AS-LIGHTING (RH) | |
| (EACH INCLUDES) | ||||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 5. | 5C-7261 M | [2] | NUT (M8X1.25-THD) | |
| 6. | 8T-4224 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
ELECTRICAL AND STARTING SYSTEM
HEATER GP
Troubleshooting
Air Inlet Heater Circuit - Test
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines
