AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

164-1450 CONTROL GP-HYDRAULIC HAND -KIT S/N BGP648-1612; BKR529-562 FOUR TO TWO LEVER, MECHANICAL CONTROLS AN ATTACHMENT 424D


OPERATOR STATION
CONTROL GP-HYDRAULIC
CONTROL GP-HYDRAULIC LOCKOUT
CONTROL GP-HYDRAULIC
CONTROL GP-STEERING

BACKHOE LOADER 424D BACKHOE LOADER BGP
 424D Backhoe Loader BGP00648-01612 (MACHINE) POWERED BY 3054B Engine SEBP3576 424D BGP   (1999)

OPERATOR STATION

CONTROL GP-HYDRAULIC
CONTROL GP-HYDRAULIC HAND
164-1420 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
164-1440 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
164-1450 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
183-3120 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
183-3150 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
228-5730 CONTROL GP-HYDRAULIC HAND
 

#SEBP35760850
 

164-1450: CONTROL GP-HYDRAULIC HAND

164-1450 CONTROL GP-HYDRAULIC HAND -KIT
S/N BGP648-1612; BKR529-562
FOUR TO TWO LEVER, MECHANICAL CONTROLS
AN ATTACHMENT
i01502288 SEBP3576
1641450 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 424D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 164-1440 Y [1] CONTROL GP-HYDRAULIC HAND  
  Y   SEPARATE ILLUSTRATION
 

#SEBP35760851
 

183-3120: CONTROL GP-HYDRAULIC HAND

183-3120 CONTROL GP-HYDRAULIC HAND -LOADER SINGLE TILT
S/N BGP648-1612; BKR529-562
PART OF 184-7867, 184-7868 CHASSIS AR
i01353436 SEBP3576
1833120 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 424D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1K-0502 B [7] WASHER (16.3X25.4X1.2-MM THK)  
2. 2R-0364 [3] RING-RETAINING  
3. 3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
4. 5H-3193 [1] PIN-SPRING  
5. 8T-4766 [1] ROD END  
6. 8T-4773 [1] BALL JOINT  
7. 8T-4815 [2] ROD END  
8. 9R-1765 [1] COVER-TOP  
9. 9R-1766 [1] COVER-BOTTOM  
10. 9R-1767 [1] BOOT  
11. 9R-9868 [1] SWITCH GP-PUSH BUTTON (LOADER NEUTRALIZER)  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
12. 107-5591 [1] NUT-JAM (3/4-16-THD)  
13. 134-0453 M [2] TURNBUCKLE (M10X1.5X50-MM)  
14. 140-6021 [1] PLATE  
15. 164-1368 [8] FASTENER (CLIP)  
16. 164-1369 [1] PLATE  
17. 179-8235 [1] LOCK PIN  
18. 183-3121 [1] BRACKET AS  
19. 183-3122 [1] LEVER AS  
20. 183-3131 [1] DAMPER AS  
  095-9230 [1] PIN-SPRING  
  183-3132 [1] CYLINDER  
21. 183-3135 [1] JOINT AS  
  183-3136 [1] BUSHING  
22. 183-3137 [1] PIN  
23. 183-3153 [1] ROD  
24. 183-3155 [1] ROD  
25. 183-3156 [1] ROD  
26. 201-8069 [1] SEAL  
27. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
28. 3S-2093 [1] STRAP-CABLE  
29. 6V-7744 M [2] LOCKNUT (M10X1.5-THD)  
30. 8C-4987 [1] PIN-CLEVIS  
31. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
32. 8T-4133 M [8] NUT (M10X1.5-THD)  
33. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
34. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
35. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
36. 8T-9501 [2] SCREW (10-16X0.75-IN)  
37. 9R-2807 [1] CLIP (RETAINER)  
38. 9R-3067 [1] PIN  
39. 9X-2065 M [2] NUT (M10X1.5-THD, LH)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP35760852
 

183-3150: CONTROL GP-HYDRAULIC HAND

183-3150 CONTROL GP-HYDRAULIC HAND -LOADER SINGLE TILT
S/N BGP648-1612; BKR529-562
PART OF 186-5333, 186-5334 HYDRAULIC AR
AN ATTACHMENT
i01431216 SEBP3576
1833150 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 424D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1K-0502 [3] WASHER (16.3X25.4X1.2-MM THK)  
2. 2R-0364 [1] RING-RETAINING  
3. 8T-4773 [1] BALL JOINT  
4. 8T-4815 [1] ROD END  
5. 134-0453 M [1] TURNBUCKLE (M10X1.5X50-MM)  
6. 164-1395 [1] KNOB  
7. 179-8235 [1] LOCK PIN  
8. 183-3151 [1] LEVER AS  
  183-3136 [1] BUSHING  
9. 183-3153 [1] ROD  
10. 183-3156 [1] ROD  
11. 8C-4987 [1] PIN-CLEVIS  
12. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
13. 8T-4133 M [3] NUT (M10X1.5-THD)  
14. 9X-2065 M [1] NUT (M10X1.5-THD, LH)  
  M   METRIC PART
 

#SEBP35760853
 

228-5730: CONTROL GP-HYDRAULIC HAND

228-5730 CONTROL GP-HYDRAULIC HAND -STABILIZER
S/N BGP648-1612; BKR529-562
PART OF 210-8918 STABILIZER AR
AN ATTACHMENT
i01854905 SEBP3576
2285730 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 424D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [1] PLATE  
2. 210-8917 [2] LEVER GP-CONTROL VALVE (STABILIZER)  
  8T-0328 [1] WASHER-HARD (5.5X10X1-MM THK)  
  134-1374 M [1] BOLT-SOCKET HEAD (M5X0.8X20-MM)  
  136-0155 M [1] SETSCREW (M4X0.7X8-MM)  
3. 217-3383 [1] BRACKET AS  
4. 222-0365 Y [2] CONTROL GP-HANDLE  
5. 229-1203 [1] COVER  
6. 129-3178 M [3] LOCKNUT (M6X1-THD)  
7. 5C-2890 M [7] NUT (M6X1-THD)  
8. 5C-9553 M [4] BOLT (M6X1X16-MM)  
9. 5P-4115 [3] WASHER-HARD (7.2X19X2-MM THK)  
10. 7X-0465 M [3] BOLT (M6X1X100-MM)  
11. 8T-4205 [11] WASHER-HARD (7.2X14.5X2-MM THK)  
12. 9X-2043 M [3] SCREW-TRUSS HEAD (M6X1X14-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP35760854
 

228-5731: CONTROL GP-HYDRAULIC HAND

228-5731 CONTROL GP-HYDRAULIC HAND -STABILIZER
S/N BGP648-1612; BKR529-562
PART OF 210-8919 STABILIZER AR
AN ATTACHMENT
i01854904 SEBP3576
2285731 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 424D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [1] PLATE  
2. 210-8917 [2] LEVER GP-CONTROL VALVE (STABILIZER)  
  8T-0328 [1] WASHER-HARD (5.5X10X1-MM THK)  
  134-1374 M [1] BOLT-SOCKET HEAD (M5X0.8X20-MM)  
  136-0155 M [1] SETSCREW (M4X0.7X8-MM)  
3. 217-3383 [1] BRACKET AS  
4. 222-9436 Y [2] CONTROL GP-HANDLE  
5. 229-1203 [1] COVER  
6. 129-3178 M [3] LOCKNUT (M6X1-THD)  
7. 5C-2890 M [4] NUT (M6X1-THD)  
8. 5C-9553 M [4] BOLT (M6X1X16-MM)  
9. 5P-4115 [3] WASHER-HARD (7.2X19X2-MM THK)  
10. 7X-0465 M [3] BOLT (M6X1X100-MM)  
11. 8T-4205 [11] WASHER-HARD (7.2X14.5X2-MM THK)  
12. 9X-2043 M [3] SCREW-TRUSS HEAD (M6X1X14-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP35760855
 

106-2404: CONTROL GP-HYDRAULIC LOCKOUT

106-2404 CONTROL GP-HYDRAULIC LOCKOUT
S/N BGP648-1612; BKR529-562
PART OF 190-2802 CONVERSION AR-CERTIFICATION
AN ATTACHMENT
i00488141 SEBP3576
1062404 CONTROL GP-HYDRAULIC LOCKOUT Parts scheme
  For full view, you need register

Parts for your 424D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 106-2405 [1] PLATE AS  
2. 106-2409 [1] PIN  
3. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
4. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
  M   METRIC PART
 

#SEBP35760856
 

164-1540: CONTROL GP-HYDRAULIC PEDAL

164-1540 CONTROL GP-HYDRAULIC PEDAL
S/N BGP648-1612; BKR529-562
EXTENDABLE STICK
PART OF 186-4968, 186-4971 VALVE AR-BANK 5, 186-4969, 186-4972 VALVE AR-BANK 6, 204-9195, 204-9196, 204-9198, 204-9199 VALVE GP-AUXILIARY
AN ATTACHMENT
i01423932 SEBP3576
1641540 CONTROL GP-HYDRAULIC PEDAL Parts scheme
  For full view, you need register

Parts for your 424D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8335 M [1] BOLT-SELF-LOCKING (M10X1.5X40-MM)  
2. 8T-4815 [1] ROD END  
3. 8T-6431 [1] ROD END  
4. 109-0533 [1] SEAL  
5. 133-8916 B [1] FILM-INSTRUCTION (EXTENDABLE STICK)  
6. 164-1541 [1] PEDAL AS (RH)  
7. 164-1544 [1] SUPPORT AS  
8. 164-1547 [1] SHAFT AS  
9. 164-1549 [1] ROD  
10. 179-8235 [1] LOCK PIN  
11. 198-0098 B [1] FILM-INSTRUCTION (AUXILIARY)  
12. 6V-7744 M [1] LOCKNUT (M10X1.5-THD)  
13. 8C-4987 [1] PIN-CLEVIS  
14. 8M-3175 [1] WASHER-HARD (10.2X16X3-MM THK)  
15. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
16. 8T-4133 M [2] NUT (M10X1.5-THD)  
17. 8T-4186 M [1] BOLT (M10X1.5X40-MM)  
18. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP35760857
 

164-1550: CONTROL GP-HYDRAULIC PEDAL

164-1550 CONTROL GP-HYDRAULIC PEDAL
S/N BGP648-1612; BKR529-562
AUXILIARY
PART OF 186-4969, 186-4972 VALVE AR-BANK 6, 204-9197, 204-9200 VALVE GP-AUXILIARY
AN ATTACHMENT
i01424739 SEBP3576
1641550 CONTROL GP-HYDRAULIC PEDAL Parts scheme
  For full view, you need register

Parts for your 424D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8335 M [1] BOLT-SELF-LOCKING (M10X1.5X40-MM)  
2. 8T-4815 [1] ROD END  
3. 8T-6431 [1] ROD END  
4. 109-0533 [1] SEAL  
5. 164-1544 [1] SUPPORT AS  
6. 164-1547 [1] SHAFT AS  
7. 164-1549 [1] ROD  
8. 164-1551 [1] PEDAL AS (LH)  
9. 179-8235 [1] LOCK PIN  
10. 6V-7744 M [1] LOCKNUT (M10X1.5-THD)  
11. 8C-4987 [1] PIN-CLEVIS  
12. 8M-3175 [1] WASHER-HARD (10.2X16X3-MM THK)  
13. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
14. 8T-4133 M [4] NUT (M10X1.5-THD)  
15. 8T-4186 M [1] BOLT (M10X1.5X40-MM)  
16. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
  M   METRIC PART
 

#SEBP35760858
 

183-4897: CONTROL GP-STEERING

183-4897 CONTROL GP-STEERING
S/N BGP648-700; BKR529-531
AN ATTACHMENT
i01366865 SEBP3576
1834897 CONTROL GP-STEERING Parts scheme
  For full view, you need register

Parts for your 424D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 153-9580 Y [1] STEERING WHEEL GP  
2. 163-7940 [1] PANEL AS  
3. 185-3529 [1] CONSOLE AS  
4. 172-3368 Y [1] STEERING COLUMN GP  
5. 5C-7261 M [2] NUT (M8X1.25-THD)  
6. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
7. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
8. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
9. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
10. 8T-8894 M [4] BOLT-SOCKET HEAD (M10X1.5X20-MM)  
11. 9X-2044 M [6] SCREW-TRUSS HEAD (M6X1X16-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP35760859
 

183-4897: CONTROL GP-STEERING

183-4897 CONTROL GP-STEERING
S/N BGP701-1612; BKR532-562
AN ATTACHMENT
i01783030 SEBP3576
1834897 CONTROL GP-STEERING Parts scheme
  For full view, you need register

Parts for your 424D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 153-9580 Y [1] STEERING WHEEL GP  
2. 163-7940 [1] PANEL AS  
3. 185-3529 [1] CONSOLE AS  
4. 206-6974 Y [1] STEERING COLUMN GP (TILT)  
5. 5C-7261 M [2] NUT (M8X1.25-THD)  
6. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
7. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
8. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
9. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
10. 8T-8894 M [4] BOLT-SOCKET HEAD (M10X1.5X20-MM)  
11. 9X-2044 M [6] SCREW-TRUSS HEAD (M6X1X16-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 424D :

CONTROL GP-HYDRAULIC HAND
164-1440 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
164-1420 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
164-1400 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HANDLE
222-9436 CONTROL GP-HANDLE
CONTROL GP-HANDLE
222-0365 CONTROL GP-HANDLE
CONSOLE GP-SIDE
183-4998 CONSOLE GP-SIDE
CONSOLE GP-SIDE
183-4997 CONSOLE GP-SIDE
CONSOLE GP-SIDE
164-1131 CONSOLE GP-SIDE
CONTROL GP-HYDRAULIC HAND
183-3120 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
183-3150 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
228-5730 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
228-5731 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC LOCKOUT
106-2404 CONTROL GP-HYDRAULIC LOCKOUT
CONTROL GP-HYDRAULIC PEDAL
164-1540 CONTROL GP-HYDRAULIC PEDAL
CONTROL GP-HYDRAULIC PEDAL
164-1550 CONTROL GP-HYDRAULIC PEDAL
CONTROL GP-STEERING
183-4897 CONTROL GP-STEERING

Truck sale:

2005 CAT 424D
Call 
2005 CAT 424D

MHS
Midrand, GAUTENG, South Africa
2005 CAT 424D
USD $28,284 
2005 CAT 424D

Goodsell Machinery & Hire
Parkes, NSW, Australia
2001 CAT 424D
Call 
2001 CAT 424D

CTC Plant
Cape Town, South Africa
2004 CAT 424D
USD $45,588 
2004 CAT 424D

Africa Plant
New Castle, KZN, South Africa
 
$56,442 USD 
CATERPILLAR 424D 2004
- BACKHOE LOADERS
METRO MACHINERY CO. LTD.
1760 Sukhumvit Rd., between SOI 52-54 Bang Chak, Phra Khanong -
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.