AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

201-8561 TRANSMISSION GP-DIRECT DRIVE -ALL WHEEL DRIVE S/N BNB700-UP PART OF 202-6007 TRANSMISSION & MOUNTING GP AN ATTACHMENT 428D


POWER TRAIN
TRANSMISSION GP
VALVE GP-RELIEF
ELECTRICAL AND STARTING SYSTEM
VALVE GP

BACKHOE LOADER 428D BACKHOE LOADER BLL
 428D Backhoe Loader BLL00651-00712 (MACHINE) POWERED BY 3054 Engine SEBP3577 428D BLL   (1999)

POWER TRAIN

TRANSMISSION GP
TRANSMISSION GP-DIRECT DRIVE
192-0842 TRANSMISSION GP-DIRECT DRIVE
TRANSMISSION GP-DIRECT DRIVE
201-8561 TRANSMISSION GP-DIRECT DRIVE
TRANSMISSION GP-DIRECT DRIVE
201-8561 TRANSMISSION GP-DIRECT DRIVE
TRANSMISSION GP-DIRECT DRIVE
201-8562 TRANSMISSION GP-DIRECT DRIVE
TRANSMISSION GP-DIRECT DRIVE
201-8562 TRANSMISSION GP-DIRECT DRIVE
TRANSMISSION GP-DIRECT DRIVE
201-8562 TRANSMISSION GP-DIRECT DRIVE
 

#SEBP35770290
 

201-8561: TRANSMISSION GP-DIRECT DRIVE

201-8561 TRANSMISSION GP-DIRECT DRIVE -ALL WHEEL DRIVE
S/N BNB700-UP
PART OF 202-6007 TRANSMISSION & MOUNTING GP
AN ATTACHMENT
i05985265 SEBP3577
2018561 TRANSMISSION GP-DIRECT DRIVE Parts scheme
  For full view, you need register

Parts for your 428D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 439-0978 Y [1] YOKE GP  
2. 443-3872 Y [1] PUMP GP-TRANSMISSION  
3. 448-0377 Y [1] SHAFT GP-COUNTER  
4. 448-0378 [1] SHAFT GP-IDLER  
  121-2537 [1] SHAFT-REVERSE  
  349-9875 [2] BEARING AS-SHAFT  
    (EACH INCLUDES)
  005-0469 [1] CUP-BEARING  
  005-0471 [1] CONE-BEARING  
5. 452-1509 Y [1] SHAFT GP-OUTPUT  
6. 452-5086 Y [1] TRANSMISSION GP-DIRECT DRIVE  
7. 452-5087 Y [1] CASE & PARTS GP-PLANETARY  
8. 452-5092 Y [1] SHAFT GP-INPUT  
  Y   SEPARATE ILLUSTRATION
 

#SEBP35770291
 

201-8562: TRANSMISSION GP-DIRECT DRIVE

201-8562 TRANSMISSION GP-DIRECT DRIVE -ALL WHEEL DRIVE
S/N BNB700-UP; BLL651-712
PART OF 202-6008 TRANSMISSION & MOUNTING GP
AN ATTACHMENT
i01949377 SEBP3577
2018562 TRANSMISSION GP-DIRECT DRIVE Parts scheme 2018562 TRANSMISSION GP-DIRECT DRIVE Parts scheme 2018562 TRANSMISSION GP-DIRECT DRIVE Parts scheme
  For full view, you need register

Parts for your 428D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 174-9711 [1] GASKET  
2. 175-0054 [1] SEAL-O-RING  
3. 9M-1974 [3] WASHER-HARD (8.8X16X2-MM THK)  
4. 122-3652 [2] PLUG  
5. 121-7405 [1] VALVE GP-RELIEF (CLUTCH PRESSURE)  
6. 121-7396 [1] VALVE GP-RELIEF (TORQUE CONVERTER INLET)  
7. 8C-5748 M [7] BOLT (M8X1.25X55-MM)  
8. 9P-9150 [4] WASHER (8.25X18X0.84-MM THK)  
9. 192-0845 [1] CASE-FRONT TRANSMISSION  
10. 156-9275 [1] CASE-REAR TRANSMISSION  
11. 9S-4191 [10] PLUG (9/16-18-THD)  
12. 3J-1907 [11] SEAL-O-RING  
13. 6V-8335 M [14] BOLT-SELF-LOCKING (M10X1.5X40-MM)  
14. 7T-3022 [2] SLEEVE  
15. 123-8906 [3] CUP-TAPERED ROLLER  
16. 123-8905 [3] CONE-BEARING  
17. 9U-8886 [4] RING-SEAL  
18. 7T-3021 [2] SYNCHRONIZER GP  
19. 161-3249 [1] RING-RETAINING  
20. 8E-5707 [1] PLATE-END  
21. 121-0697 [1] WASHER-THRUST (45X65X5-MM THK)  
22. 172-6050 [2] BEARING-SPECIAL  
23. 095-0927 [1] RING-RETAINING  
24. 121-0714 [1] PISTON  
25. 178-9566 [1] SPRING-PISTON  
26. 121-0885 [1] RETAINER  
27. 6T-9196 [1] SEAL  
28. 274-4553 [8] DISC-CLUTCH  
29. 6Y-7957 [8] DISC-FRICTION  
30. 190-9767 [1] SHAFT AS (OUTPUT)  
31. 121-0904 [1] GEAR AS (36-TEETH)  
32. 123-8912 [2] BEARING-ROLLER  
33. 122-1877 [1] WASHER-THRUST (40X65X4-MM THK)  
34. 211-6758 [1] GEAR (19-TEETH)  
35. 121-1251 [1] GEAR (28-TEETH)  
36. 117-4650 [1] GEAR (37-TEETH)  
37. 6T-9160 [1] GEAR (43-TEETH)  
38. 259-1831 [1] GEAR (37-TEETH)  
39. 6V-8500 [2] BEARING  
40. 7T-3017 [1] SPACER (52.5X59X9.6-MM THK)  
41. 7T-3018 [1] SLEEVE  
42. 6Y-2326 [1] RING  
43. 122-1878 [1] RING-SEAL  
44. 122-1879 [1] SPACER (58X67.5X2-MM THK)  
45. 104-3288 B [1] SHIM (0.05-MM THK)  
  121-2059 B [1] SHIM (0.08-MM THK)  
  121-2060 B [1] SHIM (0.18-MM THK)  
  121-2061 B [1] SHIM (0.6-MM THK)  
46. 6V-7731 M [2] BOLT (M10X1.5X70-MM)  
47. 6Y-2035 [1] GASKET  
48. 7T-3119 [1] HOUSING  
49. 121-2062 [1] WASHER-THRUST (35X55X4-MM THK)  
50. 7T-3034 [1] SPACER (56.9X64.5X1.98-MM)  
51. 6T-9144 B [1] SHIM (0.051-MM THK)  
  6T-9147 B [1] SHIM (0.076-MM THK)  
  6T-9146 B [1] SHIM (0.127-MM THK)  
  6T-9145 B [1] SHIM (0.178-MM THK)  
  6T-9143 B [1] SHIM (0.381-MM THK)  
  6T-9142 B [1] SHIM (0.508-MM THK)  
52. 1H-9721 [1] PLUG-EXPANSION  
53. 6K-0806 [1] STRAP-CABLE  
54. 7T-3111 [1] COVER  
55. 120-9762 [4] SEAL-O-RING  
56. 121-7391 [1] LEVER  
57. 005-0469 [2] CUP-BEARING  
58. 005-0471 [2] CONE-BEARING  
59. 211-6759 [1] SHAFT (OUTPUT)  
60. 123-8910 [1] CUP-TAPERED ROLLER  
61. 123-8909 [1] CONE-BEARING  
62. 7T-2646 [2] SPACER (66X79.5X2.02-MM THK)  
63. 6T-9166 [2] SHIM (0.051-MM THK)  
  6T-9165 B [2] SHIM (0.076-MM THK)  
  6T-9164 B [2] SHIM (0.178-MM THK)  
  6T-9163 B [2] SHIM (0.599-MM THK)  
64. 7T-3251 [1] BREATHER (TRANSMISSION)  
65. 6V-8210 M [2] BOLT (M8X1.25X16-MM)  
66. 106-9861 [1] PLATE AS-COVER  
67. 7T-3051 [1] PLUG  
68. 8T-1580 [1] CUP-BEARING  
69. 8T-1581 [1] BEARING-TAPERED ROLLER  
70. 6Y-2737 [1] CUP-BEARING  
71. 6Y-2736 [1] CONE-BEARING  
72. 121-2500 [3] WASHER-THRUST (50X70X4-MM THK)  
73. 121-2511 [1] SHAFT  
74. 121-2537 [1] SHAFT-REVERSE  
75. 121-2545 [1] SHAFT AS-INPUT  
76. 121-2603 [1] GEAR (24-TEETH)  
77. 121-2604 [1] GEAR (27-TEETH)  
78. 121-0694 [1] WASHER-THRUST (40X70X4-MM THK)  
79. 122-1882 [2] PLATE-END  
80. 122-1881 [12] PLATE-CLUTCH  
81. 122-1880 [12] DISC  
82. 6V-8757 [3] RING-RETAINING  
83. 178-8200 [2] RETAINER-SPRING  
84. 178-8134 [2] SPRING  
85. 178-8132 [2] SEAL  
86. 121-9875 M [4] BOLT (M10X1.5X55-MM)  
87. 122-6787 [2] YOKE AS  
88. 122-1883 [1] SPACER (38X45X5-MM THK)  
89. 122-1885 [2] SPACER (51X55X4-MM THK)  
90. 123-8913 [4] BEARING-ROLLER  
91. 172-5317 [2] BEARING-SPECIAL  
92. 122-3649 [2] RING-RETAINING  
93. 7T-3195 [2] WASHER (12.3X47X6.35-MM THK)  
94. 123-2920 [1] PLUG  
95. 6V-8097 M [2] BOLT (M12X1.75X30-MM)  
96. 5P-8066 [2] SEAL-O-RING  
97. 122-1884 [1] SPACER (45X49X8-MM THK)  
98. 121-7385 [1] PUMP GP-TRANSMISSION  
  208-8240 [1] SEAL-LIP TYPE  
99. 7X-4741 [1] SEAL  
100. 122-1886 [1] RING-SEAL  
101. 014-5645 [3] BALL  
102. 6Y-1341 [2] SPRING  
103. 121-7403 [1] FORK-SHIFT  
104. 121-7389 [1] ROD AS-GEARSHIFT (FIRST, SECOND)  
105. 121-7390 [1] ROD AS-GEARSHIFT (THIRD, FOURTH)  
106. 7T-3249 [2] SCREW (3/8-24X0.75-IN)  
107. 123-8907 [2] CONE-BEARING  
108. 123-8908 [2] CUP-TAPERED ROLLER  
109. 7T-3109 [1] PIN  
110. 121-7404 [1] FORK-SHIFT  
111. 127-3017 [1] SEAT AS  
112. 6V-5100 [1] SEAL-O-RING  
113. 3S-2093 [1] STRAP-CABLE  
114. 1U-8846 [1] SEALANT-GASKET  
115. 123-2919 M [2] NUT (M11X1-THD)  
116. 122-1876 [1] TUBE  
117. 6Y-1896 [1] PLUG AS-DRAIN  
118. 123-2918 [2] SLEEVE  
119. 121-7398 [1] SPACER (70X79.5X2-MM THK)  
120. 121-7399 B [1] SHIM (0.05-MM THK)  
  121-7400 B [1] SHIM (0.08-MM THK)  
  121-7401 B [1] SHIM (0.18-MM THK)  
  121-7402 B [1] SHIM (0.6-MM THK)  
121. 9W-5460 [1] RING  
122. 4F-7952 [1] SEAL-O-RING  
123. 7T-2651 [1] STRAINER-SUCTION  
124. 178-8215 [2] SLEEVE  
125. 9X-6615 M [4] BOLT (M5X0.8X30-MM)  
126. 121-4036 Y [1] VALVE GP-SOLENOID (ALL WHEEL DRIVE)  
127. 223-8181 Y [1] VALVE GP-SOLENOID (DIRECTION)  
128. 3G-6927 [1] ADAPTER  
129. 7T-3253 [2] DOWEL  
130. 216-2267 [2] SEAL-LIP TYPE  
131. 122-6785 [1] PLUG AS  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP35770292
 

201-8562: TRANSMISSION GP-DIRECT DRIVE

201-8562 TRANSMISSION GP-DIRECT DRIVE -ALL WHEEL DRIVE
S/N BNB700-UP
PART OF 202-6008 TRANSMISSION & MOUNTING GP
Type 1
AN ATTACHMENT
i04142509 SEBP3577
2018562 TRANSMISSION GP-DIRECT DRIVE Parts scheme 2018562 TRANSMISSION GP-DIRECT DRIVE Parts scheme 2018562 TRANSMISSION GP-DIRECT DRIVE Parts scheme
  For full view, you need register

Parts for your 428D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 174-9711 [1] GASKET  
2. 175-0054 [1] SEAL-O-RING  
3. 9M-1974 [3] WASHER-HARD (8.8X16X2-MM THK)  
4. 122-3652 [2] PLUG  
5. 121-7405 [1] VALVE GP-RELIEF (CLUTCH PRESSURE)  
  6V-9178 [1] SEAL-O-RING  
  7X-4744 [1] SEAL-O-RING  
  106-9586 [1] SEAL-O-RING  
6. 121-7396 [1] VALVE GP-RELIEF (TORQUE CONVERTER INLET)  
  6V-4589 [1] SEAL-O-RING  
  8L-2746 [1] SEAL-O-RING  
7. 8C-5748 M [7] BOLT (M8X1.25X55-MM)  
8. 9P-9150 [4] WASHER (8.25X18X0.84-MM THK)  
9. 192-0845 [1] CASE-FRONT TRANSMISSION  
10. 156-9275 [1] CASE-REAR TRANSMISSION  
11. 9S-4191 [10] PLUG (9/16-18-THD)  
12. 3J-1907 [10] SEAL-O-RING  
13. 6V-8335 M [14] BOLT-SELF-LOCKING (M10X1.5X40-MM)  
14. 7T-3022 [2] SLEEVE  
15. 123-8906 [3] CUP-TAPERED ROLLER  
16. 123-8905 [3] CONE-BEARING  
17. 9U-8886 [4] RING-SEAL  
18. 7T-3021 [2] SYNCHRONIZER GP  
19. 161-3249 [1] RING-RETAINING  
20. 8E-5707 [1] PLATE-END  
21. 147-0203 C [1] WASHER-THRUST (45.3X65X5-MM THK)  
22. 172-6050 [2] BEARING-SPECIAL  
23. 095-0927 [1] RING-RETAINING  
24. 121-0714 [1] PISTON  
25. 178-9566 [1] SPRING-PISTON  
26. 121-0885 [1] RETAINER  
27. 6T-9196 [1] SEAL  
28. 274-4553 [8] DISC-CLUTCH  
29. 6Y-7957 [8] DISC-FRICTION  
30. 190-9767 [1] SHAFT AS (OUTPUT)  
31. 121-0904 [1] GEAR AS (36-TEETH)  
32. 123-8912 [2] BEARING-ROLLER  
33. 122-1877 [1] WASHER-THRUST (40X65X4-MM THK)  
34. 211-6758 [1] GEAR (19-TEETH)  
35. 121-1251 [1] GEAR (28-TEETH)  
36. 117-4650 [1] GEAR (37-TEETH)  
37. 6T-9160 [1] GEAR (43-TEETH)  
38. 259-1831 [1] GEAR (37-TEETH)  
39. 6V-8500 [2] BEARING  
40. 7T-3017 [1] SPACER (52.5X59X9.6-MM THK)  
41. 7T-3018 [1] SLEEVE  
42. 6Y-2326 [1] RING  
43. 122-1878 [1] RING-SEAL  
44. 122-1879 [1] SPACER (58X67.5X2-MM THK)  
45. 104-3288 B [1] SHIM (0.05-MM THK)  
  121-2059 B [1] SHIM (0.08-MM THK)  
  121-2060 B [1] SHIM (0.18-MM THK)  
  121-2061 B [1] SHIM (0.6-MM THK)  
46. 6V-7731 M [2] BOLT (M10X1.5X70-MM)  
47. 6Y-2035 [1] GASKET  
48. 7T-3119 [1] HOUSING  
49. 121-2062 [1] WASHER-THRUST (35X55X4-MM THK)  
50. 7T-3034 [1] SPACER (56.9X64.5X1.98-MM)  
51. 6T-9144 B [1] SHIM (0.051-MM THK)  
  6T-9147 B [1] SHIM (0.076-MM THK)  
  6T-9146 B [1] SHIM (0.127-MM THK)  
  6T-9145 B [1] SHIM (0.178-MM THK)  
  6T-9143 B [1] SHIM (0.381-MM THK)  
  6T-9142 B [1] SHIM (0.508-MM THK)  
52. 1H-9721 [1] PLUG-EXPANSION  
53. 6K-0806 [1] STRAP-CABLE  
54. 7T-3111 [1] COVER  
55. 120-9762 [4] SEAL-O-RING  
56. 121-7391 [1] LEVER  
57. 005-0469 [2] CUP-BEARING  
58. 005-0471 [2] CONE-BEARING  
59. 211-6759 [1] SHAFT (OUTPUT)  
60. 123-8910 [1] CUP-TAPERED ROLLER  
61. 123-8909 [1] CONE-BEARING  
62. 7T-2646 [2] SPACER (66X79.5X2.02-MM THK)  
63. 6T-9166 [2] SHIM (0.051-MM THK)  
  6T-9165 B [2] SHIM (0.076-MM THK)  
  6T-9164 B [2] SHIM (0.178-MM THK)  
  6T-9163 B [2] SHIM (0.599-MM THK)  
64. 7T-3251 [1] BREATHER (TRANSMISSION)  
65. 6V-8210 M [2] BOLT (M8X1.25X16-MM)  
66. 106-9861 [1] PLATE AS-COVER  
67. 7T-3051 [1] PLUG  
68. 8T-1580 [1] CUP-BEARING  
69. 8T-1581 [1] BEARING-TAPERED ROLLER  
70. 6Y-2737 [1] CUP-BEARING  
71. 6Y-2736 [1] CONE-BEARING  
72. 121-2500 [3] WASHER-THRUST (50X70X4-MM THK)  
73. 121-2511 [1] SHAFT  
74. 121-2537 [1] SHAFT-REVERSE  
75. 121-2545 [1] SHAFT AS-INPUT  
76. 121-2603 [1] GEAR (24-TEETH)  
77. 121-2604 [1] GEAR (27-TEETH)  
78. 121-0694 [1] WASHER-THRUST (40X70X4-MM THK)  
79. 122-1882 [2] PLATE-END  
80. 122-1881 [12] PLATE-CLUTCH  
81. 122-1880 [12] DISC  
82. 6V-8757 [3] RING-RETAINING  
83. 178-8200 [2] RETAINER-SPRING  
84. 178-8134 [2] SPRING  
85. 178-8132 [2] SEAL  
86. 121-9875 M [4] BOLT (M10X1.5X55-MM)  
87. 122-6787 [2] YOKE AS  
    (EACH INCLUDES)
  [1] GUARD  
88. 122-1883 [1] SPACER (38X45X5-MM THK)  
89. 122-1885 [2] SPACER (51X55X4-MM THK)  
90. 123-8913 [4] BEARING-ROLLER  
91. 172-5317 [2] BEARING-SPECIAL  
92. 122-3649 [2] RING-RETAINING  
93. 7T-3195 [2] WASHER (12.3X47X6.35-MM THK)  
94. 123-2920 [1] PLUG  
95. 6V-8097 M [2] BOLT (M12X1.75X30-MM)  
96. 5P-8066 [2] SEAL-O-RING  
97. 122-1884 [1] SPACER (45X49X8-MM THK)  
98. 121-7385 [1] PUMP GP-TRANSMISSION  
  208-8240 [1] SEAL-LIP TYPE  
99. 7X-4741 [1] SEAL  
100. 122-1886 [1] RING-SEAL  
101. 014-5645 [3] BALL  
102. 6Y-1341 [2] SPRING  
103. 121-7403 [1] FORK-SHIFT  
104. 121-7389 [1] ROD AS-GEARSHIFT (FIRST, SECOND)  
105. 121-7390 [1] ROD AS-GEARSHIFT (THIRD, FOURTH)  
106. 7T-3249 [2] SCREW (3/8-24X0.75-IN)  
107. 123-8907 [2] CONE-BEARING  
108. 123-8908 [2] CUP-TAPERED ROLLER  
109. 7T-3109 [1] PIN  
110. 121-7404 [1] FORK-SHIFT  
111. 127-3017 [1] SEAT AS  
112. 6V-5100 [1] SEAL-O-RING  
113. 3S-2093 [1] STRAP-CABLE  
115. 123-2919 M [2] NUT (M11X1-THD)  
116. 122-1876 [1] TUBE  
117. 6Y-1896 [1] PLUG AS-DRAIN (TRANSMISSION)  
  5P-6718 [1] SEAL-O-RING  
118. 123-2918 [2] SLEEVE  
119. 121-7398 [1] SPACER (70X79.5X2-MM THK)  
120. 121-7399 B [1] SHIM (0.05-MM THK)  
  121-7400 B [1] SHIM (0.08-MM THK)  
  121-7401 B [1] SHIM (0.18-MM THK)  
  121-7402 B [1] SHIM (0.6-MM THK)  
121. 9W-5460 [1] RING  
122. 4F-7952 [1] SEAL-O-RING  
123. 7T-2651 [1] STRAINER-SUCTION (TRANSMISSION)  
124. 178-8215 [2] SLEEVE  
125. 9X-6615 M [4] BOLT (M5X0.8X30-MM)  
126. 121-4036 Y [1] VALVE GP-SOLENOID (ALL WHEEL DRIVE)  
127. 223-8181 Y [1] VALVE GP-SOLENOID (DIRECTION)  
128. 3G-6927 [1] ADAPTER  
129. 7T-3253 [2] DOWEL  
130. 302-8432 C [2] SEAL-LIP TYPE  
131. 293-2147 C [1] BREATHER AS (TRANSMISSION)  
  3J-1907 [1] SEAL-O-RING  
  122-6785 [1] PLUG AS  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP35770293
 

201-8562: TRANSMISSION GP-DIRECT DRIVE

201-8562 TRANSMISSION GP-DIRECT DRIVE -ALL WHEEL DRIVE
S/N BNB700-UP
PART OF 202-6008 TRANSMISSION & MOUNTING GP
Type 2
AN ATTACHMENT
i04803520 SEBP3577
2018562 TRANSMISSION GP-DIRECT DRIVE Parts scheme 2018562 TRANSMISSION GP-DIRECT DRIVE Parts scheme 2018562 TRANSMISSION GP-DIRECT DRIVE Parts scheme 2018562 TRANSMISSION GP-DIRECT DRIVE Parts scheme 2018562 TRANSMISSION GP-DIRECT DRIVE Parts scheme
  For full view, you need register

Parts for your 428D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 192-0845 [1] CASE-FRONT TRANSMISSION  
2. 156-9275 [1] CASE-REAR TRANSMISSION  
3. 7T-3034 B [1] SPACER (56.9X64.5X1.98-MM)  
4. 6T-9144 B [1] SHIM (0.051-MM THK)  
5. 6T-9147 B [1] SHIM (0.076-MM THK)  
6. 6T-9146 B [1] SHIM (0.127-MM THK)  
7. 6T-9145 B [1] SHIM (0.178-MM THK)  
8. 6T-9143 B [1] SHIM (0.381-MM THK)  
9. 6T-9142 B [1] SHIM (0.508-MM THK)  
10. 349-9875 C [2] BEARING AS-SHAFT  
    (EACH INCLUDES)
  005-0471 [1] CONE-BEARING  
  005-0469 [1] CUP-BEARING  
11. 121-2537 [1] SHAFT-REVERSE  
12. 293-2147 [1] BREATHER AS (TRANSMISSION)  
  122-6785 [1] PLUG AS  
  3J-1907 [1] SEAL-O-RING  
13. 128-5596 CY [1] SHAFT GP-PUMP DRIVE  
14. 121-7385 [1] PUMP GP-TRANSMISSION (DIRECT DRIVE)  
  208-8240 [1] SEAL-LIP TYPE  
15. 9P-9150 [4] WASHER (8.25X18X0.84-MM THK)  
16. 8C-5748 M [7] BOLT (M8X1.25X55-MM)  
17. 388-8330 C [3] BEARING AS-TAPERED ROLLER  
    (EACH INCLUDES)
  123-8905 [1] CONE-BEARING  
  123-8906 [1] CUP-TAPERED ROLLER  
18. 121-0694 [1] WASHER-THRUST (40X70X4-MM THK)  
19. 121-2545 [1] SHAFT AS-INPUT  
19A. 123-0714 [1] BEARING  
  123-2920 [3] PLUG  
  [1] SHAFT AS  
  [2] HOUSING-CLUTCH  
20. 9U-8886 [4] RING-SEAL  
21. 122-1886 [1] RING-SEAL  
22. 172-5317 [2] BEARING-SPECIAL  
23. 121-2603 [1] GEAR (24-TEETH)  
24. 121-2500 [3] WASHER-THRUST (50X70X4-MM THK)  
25. 6V-8757 [3] RING-RETAINING  
26. 178-8200 [2] RETAINER-SPRING  
27. 178-8215 [2] SLEEVE  
28. 178-8134 [2] SPRING  
29. 178-8132 [2] SEAL  
30. 122-1882 [2] PLATE-END  
31. 122-3649 [2] RING-RETAINING  
32. 122-1880 [12] DISC  
33. 122-1881 [12] PLATE-CLUTCH  
34. 121-7398 B [1] SPACER (70X79.5X2-MM THK)  
35. 121-7399 B [1] SHIM (0.05-MM THK)  
36. 121-7400 B [1] SHIM (0.08-MM THK)  
37. 121-7401 B [1] SHIM (0.18-MM THK)  
38. 121-7402 B [1] SHIM (0.6-MM THK)  
39. 349-9891 C [1] BEARING-TAPERED ROLLER  
  123-8909 [1] CONE-BEARING  
  123-8910 [1] CUP-TAPERED ROLLER  
40. 121-2604 [1] GEAR (27-TEETH)  
41. 7T-2646 B [2] SPACER (66X79.5X2.02-MM THK)  
42. 6T-9166 B [2] SHIM (0.051-MM THK)  
43. 6T-9165 B [2] SHIM (0.076-MM THK)  
44. 6T-9164 B [2] SHIM (0.178-MM THK)  
45. 6T-9163 B [2] SHIM (0.599-MM THK)  
46. 349-9892 C [2] BEARING AS-TAPERED ROLLER  
    (EACH INCLUDES)
  123-8907 [1] CONE-BEARING  
  123-8908 [1] CUP-TAPERED ROLLER  
47. 122-1879 B [1] SPACER (58X67.5X2-MM THK)  
48. 104-3288 B [1] SHIM (0.05-MM THK)  
49. 121-2059 B [1] SHIM (0.08-MM THK)  
50. 121-2060 B [1] SHIM (0.18-MM THK)  
51. 121-2061 B [1] SHIM (0.6-MM THK)  
52. 122-1877 [1] WASHER-THRUST (40X65X4-MM THK)  
53. 172-6050 [2] BEARING-SPECIAL  
54. 190-9767 [1] SHAFT AS (OUTPUT)  
55. 121-0904 [1] GEAR AS (36-TEETH)  
56. 147-0203 C [1] WASHER-THRUST (45.3X65X5-MM THK)  
57. 8E-5707 [1] PLATE-END  
58. 161-3249 [1] RING-RETAINING  
59. 121-0714 [1] PISTON  
60. 274-4553 [8] DISC-CLUTCH  
61. 337-3530 C [8] DISC-FRICTION  
62. 6V-5100 [1] SEAL-O-RING  
63. 178-9566 [1] SPRING-PISTON  
64. 121-0885 [1] RETAINER  
65. 095-0927 [1] RING-RETAINING  
66. 122-1883 [1] SPACER (38X45X5-MM THK)  
67. 388-8448 C [2] YOKE AS  
    (EACH INCLUDES)
  [1] GUARD  
68. 302-8432 [2] SEAL-LIP TYPE  
69. 5P-8066 [2] SEAL-O-RING  
70. 7T-3195 [2] WASHER (12.3X47X6.35-MM THK)  
71. 6V-8097 M [2] BOLT (M12X1.75X30-MM)  
72. 6T-9196 [1] SEAL  
73. 123-8912 [2] BEARING-ROLLER  
74. 122-1884 [1] SPACER (45X49X8-MM THK)  
75. 122-1878 [1] RING-SEAL  
76. 349-9848 C [1] BEARING AS-TAPERED ROLLER  
  8T-1581 [1] BEARING-TAPERED ROLLER  
  8T-1580 [1] CUP-BEARING  
77. 121-2511 [1] SHAFT  
78. 7T-3051 [1] PLUG  
79. 388-8364 C [1] BEARING AS-TAPERED ROLLER  
  6Y-2736 [1] CONE-BEARING  
  6Y-2737 [1] CUP-BEARING  
80. 121-2062 [1] WASHER-THRUST (35X55X4-MM THK)  
81. 211-6758 [1] GEAR (19-TEETH)  
82. 259-1831 [1] GEAR (37-TEETH)  
83. 6T-9160 [1] GEAR (43-TEETH)  
84. 7T-3018 [1] SLEEVE  
85. 6V-8500 [2] BEARING  
86. 7T-3017 [1] SPACER (52.5X59X9.6-MM THK)  
87. 7T-3022 [2] SLEEVE  
88. 211-6759 [1] SHAFT (OUTPUT)  
89. 121-1251 [1] GEAR (28-TEETH)  
90. 7T-3021 [2] SYNCHRONIZER GP  
91. 117-4650 [1] GEAR (37-TEETH)  
92. 6Y-2326 [1] RING  
93. 123-8913 [4] BEARING-ROLLER  
94. 122-1885 [2] SPACER (51X55X4-MM THK)  
95. 7X-4741 [1] SEAL  
96. 6Y-2035 [1] GASKET  
97. 344-2608 C [1] HOUSING AS-FILTER  
  7T-3119 [1] HOUSING  
  342-3830 [1] ADAPTER  
98. 6V-7981 CM [2] BOLT (M10X1.5X70-MM)  
99. 119-4740 C [1] FILTER-OIL (STANDARD EFFICIENCY)  
100. 293-8745 C [6] PLUG-PROTECTION  
101. 334-5131 C [9] PLUG AS  
    (EACH INCLUDES)
  9S-4191 [1] PLUG (9/16-18-THD)  
  3J-1907 [1] SEAL-O-RING  
102. 223-8181 Y [1] VALVE GP-SOLENOID  
103. 9X-6615 M [4] BOLT (M5X0.8X30-MM)  
104. 274-8615 C [1] CAP-DUST  
105. 4C-9521 C [3] CAP-PROTECTIVE  
106. 292-1248 C [2] PLUG  
107. 7T-3251 [1] BREATHER (TRANSMISSION)  
108. 123-2918 [2] SLEEVE  
109. 123-2919 M [2] NUT (M11X1-THD)  
110. 294-9820 C [1] TUBE  
111. 6Y-1896 [1] PLUG AS-DRAIN (TRANSMISSION)  
  5P-6718 [1] SEAL-O-RING  
112. 7T-3253 [2] DOWEL  
113. 6Y-1341 [2] SPRING  
114. 121-7389 [1] ROD AS-GEARSHIFT (FIRST, SECOND)  
115. 121-7390 [1] ROD AS-GEARSHIFT (THIRD, FOURTH)  
    (EACH ROD AS INCLUDES)
  [1] LUG  
116. 014-5645 [3] BALL  
117. 121-7404 [1] FORK-SHIFT (THIRD, FOURTH)  
118. 121-7403 [1] FORK-SHIFT (1ST, 2ND)  
119. 7T-3249 [2] SCREW (3/8-24X0.75-IN)  
120. 127-3017 [1] SEAT AS (BALL)  
121. 9M-1974 [3] WASHER-HARD (8.8X16X2-MM THK)  
122. 7T-3111 [1] COVER  
123. 121-7391 [1] LEVER  
124. 7T-3109 [1] PIN  
125. 174-9711 [1] GASKET  
126. 365-4592 C [1] CLAMP  
127. 237-5186 C [1] PLATE-IDENTIFICATION (TRANSMISSION)  
128. 336-5469 C [4] RIVET  
129. 3S-2093 [1] STRAP-CABLE  
130. 122-3652 [2] PLUG  
131. 330-3037 [1] VALVE GP-RELIEF (TORQUE CONVERTER INLET)  
132. 121-7405 [1] VALVE GP-RELIEF (CLUTCH PRESSURE)  
  6V-9178 [1] SEAL-O-RING  
  7X-4744 [1] SEAL-O-RING  
  106-9586 [1] SEAL-O-RING  
133. 175-0054 [1] SEAL-O-RING  
134. 237-5188 C [1] PLUG-EXPANSION  
135. 106-9861 [1] PLATE AS-COVER  
136. 6V-5215 CM [2] BOLT (M8X1.25X16-MM)  
137. 7T-2651 [1] STRAINER-SUCTION (TRANSMISSION)  
138. 4F-7952 [1] SEAL-O-RING  
139. 9W-5460 [1] RING  
140. 120-9762 [4] SEAL-O-RING  
141. 9X-3985 C [1] PLUG-PROTECTION  
142. 122-3650 C [1] PLUG  
143. 6V-5842 CM [14] BOLT (M10X1.5X40-MM)  
144. 334-4091 CM [4] BOLT (M10X1.5X55-MM)  
145. 123-2920 [1] PLUG  
146. 388-8370 C [1] VALVE GP-SOLENOID (TRANSMISSION)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP35770294
 

201-8562: TRANSMISSION GP-DIRECT DRIVE

201-8562 TRANSMISSION GP-DIRECT DRIVE -ALL WHEEL DRIVE
S/N BNB700-UP
PART OF 202-6008 TRANSMISSION & MOUNTING GP
Type 3
AN ATTACHMENT
i05845677 SEBP3577
2018562 TRANSMISSION GP-DIRECT DRIVE Parts scheme
  For full view, you need register

Parts for your 428D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 439-0978 CY [2] YOKE GP  
2. 443-3872 CY [1] PUMP GP-TRANSMISSION  
3. 448-0377 CY [1] SHAFT GP-COUNTER (4-WHEEL DRIVE)  
4. 448-0378 C [1] SHAFT GP-IDLER  
  121-2537 [1] SHAFT-REVERSE  
  349-9875 [2] BEARING AS-SHAFT  
    (EACH INCLUDES)
  005-0469 [1] CUP-BEARING  
  005-0471 [1] CONE-BEARING  
5. 449-5050 CY [1] SHAFT GP-OUTPUT (4-WHEEL DRIVE)  
6. 452-5092 CY [1] SHAFT GP-INPUT (2-WHEEL DRIVE)  
7. 454-3437 CY [1] CLUTCH GP (2-WHEEL DRIVE)  
8. 457-1175 CY [1] CASE & PARTS GP-PLANETARY (4-WHEEL DRIVE)  
9. 457-1178 CY [1] CONTROL GP-TRANSMISSION HYD (4-WHEEL DRIVE)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP35770295
 

452-5086: TRANSMISSION GP-DIRECT DRIVE

452-5086 TRANSMISSION GP-DIRECT DRIVE
S/N BNB700-UP
PART OF 201-8561 TRANSMISSION GP-DIRECT DRIVE
AN ATTACHMENT
i06803009 SEBP3577
4525086 TRANSMISSION GP-DIRECT DRIVE Parts scheme
  For full view, you need register

Parts for your 428D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 330-3037 [1] VALVE GP-RELIEF  
  6V-4589 [1] SEAL-O-RING  
  8L-2746 [1] SEAL-O-RING  
2. 121-7405 [1] VALVE GP-RELIEF  
  6V-9178 [1] SEAL-O-RING  
  7X-4744 [1] SEAL-O-RING  
  106-9586 [1] SEAL-O-RING  
3. 223-8181 Y [1] VALVE GP-SOLENOID (TRANSMISSION)  
4. 305-3430 [4] PLUG-PROTECTION  
5. 9X-6615 M [4] BOLT (M5X0.8X30-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP35770296
 

192-0849: TRANSMISSION GP-POWER SHIFT

192-0849 TRANSMISSION GP-POWER SHIFT -ALL WHEEL DRIVE
S/N BNB700-UP; BLL651-712
PART OF 202-7432 TRANSMISSION & MOUNTING GP, 185-7587 TRANSMISSION AR-POWER SHIFT
Type 1
AN ATTACHMENT
i01430573 SEBP3577
1920849 TRANSMISSION GP-POWER SHIFT Parts scheme 1920849 TRANSMISSION GP-POWER SHIFT Parts scheme 1920849 TRANSMISSION GP-POWER SHIFT Parts scheme
  For full view, you need register

Parts for your 428D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 178-9566 [2] SPRING-PISTON  
2. 8C-5748 M [4] BOLT (M8X1.25X55-MM)  
3. 161-3249 [1] RING-RETAINING  
4. 8T-1581 [1] BEARING-TAPERED ROLLER  
5. 150-7732 [2] SEAL-O-RING  
6. 8T-0271 M [2] BOLT-SOCKET HEAD (M10X1.5X35-MM)  
7. 8T-1580 [1] CUP-BEARING  
8. 4F-7952 [1] SEAL-O-RING  
9. 147-0218 [1] TUBE AS  
10. 148-8988 Y [2] VALVE GP-SOLENOID  
11. 8C-8545 M [2] BOLT-SOCKET HEAD (M5X0.8X20-MM)  
12. 120-9762 [5] SEAL-O-RING  
13. 148-8986 Y [1] VALVE GP-SOLENOID (REVERSE)  
14. 147-0253 [1] CASE AS-REAR  
  371-8635 [1] CASE-REAR  
  163-9091 [11] PLUG  
15. 121-7398 [1] SPACER (70X79.5X2-MM THK)  
  121-7402 B [1] SHIM (0.6-MM THK)  
  121-7401 B [1] SHIM (0.18-MM THK)  
  121-7400 B [1] SHIM (0.08-MM THK)  
  121-7399 B [1] SHIM (0.05-MM THK)  
16. 7T-2651 [1] STRAINER-SUCTION (TRANSMISSION)  
17. 9W-5460 [1] RING  
18. 147-0209 Y [1] VALVE GP-RELIEF (FORWARD HIGH)  
19. 121-7396 [1] VALVE GP-RELIEF (CLUTCH 2 SOLENOID)  
  6V-4589 [1] SEAL-O-RING  
  8L-2746 [1] SEAL-O-RING  
20. 7T-2646 [2] SPACER (66X79.5X2.02-MM THK)  
  6T-9166 B [2] SHIM (0.051-MM THK)  
  6T-9165 B [2] SHIM (0.076-MM THK)  
  6T-9164 B [2] SHIM (0.178-MM THK)  
  6T-9163 [2] SHIM (0.599-MM THK)  
21. 6T-9202 [2] PLUG  
22. 121-4036 Y [2] VALVE GP-SOLENOID  
23. 106-9861 [1] PLATE AS-COVER  
24. 122-1878 [1] RING-SEAL  
25. 147-0201 [1] TUBE AS  
26. 7W-3556 [12] WASHER (14.27X20.57X1.5-MM THK)  
27. 147-0234 [6] BOLT (9/16-18X0.83-IN)  
28. 1U-8846 B SEALANT-GASKET  
29. 5P-8066 [2] SEAL-O-RING  
30. 6V-8097 M [3] BOLT (M12X1.75X30-MM)  
31. 7T-3195 [3] WASHER (12.3X47X6.35-MM THK)  
32. 122-6787 [2] YOKE AS  
    (EACH INCLUDES)
  [1] GUARD  
33. 216-2267 [2] SEAL-LIP TYPE  
34. 121-7385 Y [1] PUMP GP-TRANSMISSION (DIRECT DRIVE)  
35. 9P-9150 [4] WASHER (8.25X18X0.84-MM THK)  
36. 173-0332 [1] SHAFT AS  
  163-9091 [1] PLUG  
37. 7X-4741 [1] SEAL  
38. 9S-4185 [3] PLUG (3/4-16-THD)  
39. 3K-0360 [3] SEAL-O-RING  
40. 123-8906 [5] CUP-TAPERED ROLLER  
41. 123-8905 [5] CONE-BEARING  
42. 121-0694 [2] WASHER-THRUST (40X70X4-MM THK)  
43. 172-5317 [6] BEARING-SPECIAL  
44. 123-8913 [2] BEARING-ROLLER  
45. 147-0224 [1] GEAR (45/32-TEETH)  
46. 8E-5707 [7] PLATE-END  
47. 6V-8757 [6] RING-RETAINING  
48. 274-4553 [45] DISC-CLUTCH  
49. 6Y-7929 [37] DISC-FRICTION  
50. 9U-8875 [6] RING-RETAINING  
51. 121-2500 [4] WASHER-THRUST (50X70X4-MM THK)  
52. 147-0202 [2] GEAR (45/24-TEETH)  
53. 147-0257 [1] SHAFT AS-INPUT  
  123-2920 [3] PLUG  
54. 9U-8886 [4] RING-SEAL  
55. 123-8910 [1] CUP-TAPERED ROLLER  
56. 123-8909 [1] CONE-BEARING  
57. 7T-6655 [4] BEARING  
58. 147-0259 [2] SPACER (51.1X54.9X18.7-MM THK)  
59. 147-0238 [5] SPRING AS  
60. 6V-5100 [5] SEAL-O-RING  
61. 147-0228 [4] PISTON-CLUTCH  
62. 6T-9196 [7] SEAL  
63. 122-1886 [1] RING-SEAL  
64. 123-8907 [3] CONE-BEARING  
65. 123-8908 [3] CUP-TAPERED ROLLER  
66. 147-0212 [1] GEAR (42-TEETH)  
67. 147-0216 [1] GEAR (38-TEETH)  
68. 147-0203 [3] WASHER-THRUST (45.3X65X5-MM THK)  
69. 147-0258 [1] SPACER (46X50X16-MM THK)  
70. 147-0215 [1] GEAR (45/19-TEETH)  
71. 172-6050 [6] BEARING-SPECIAL  
72. 122-1877 [3] WASHER-THRUST (40X65X4-MM THK)  
73. 6Y-1192 [7] RING-SEAL  
74. 123-8912 [6] BEARING-ROLLER  
75. 9S-4191 [14] PLUG (9/16-18-THD)  
76. 147-0264 [1] GEAR (45/28-TEETH)  
77. 147-0260 [1] RETAINER-SPRING  
78. 095-0928 [1] RING-RETAINING  
79. 147-0205 [2] WASHER (55X78X5-MM THK)  
80. 147-0248 [1] SPACER (56.2X60X15.8-MM THK)  
81. 157-2090 [1] GEAR (38-TEETH)  
82. 172-6743 [2] BEARING-SPECIAL  
83. 147-0242 [1] GEAR (48-TEETH)  
84. 150-3757 [2] BEARING  
85. 009-2062 [2] SEAL-O-RING  
86. 157-2088 [2] PISTON AS  
87. 147-0261 [1] SHAFT AS-OUTPUT (REAR)  
  163-9091 [2] PLUG  
88. 095-0927 [1] RING-RETAINING  
89. 122-1884 [1] SPACER (45X49X8-MM THK)  
90. 147-0210 [1] GEAR (45/36-TEETH)  
91. 147-0207 [1] SHAFT AS-OUTPUT (FRONT)  
92. 122-1879 [2] SPACER (58X67.5X2-MM THK)  
  104-3288 B [2] SHIM (0.05-MM THK)  
  121-2059 B [2] SHIM (0.08-MM THK)  
  121-2060 B [2] SHIM (0.18-MM THK)  
  121-2061 B [2] SHIM (0.6-MM THK)  
93. 6V-8210 M [2] BOLT (M8X1.25X16-MM)  
94. 147-0236 [1] TUBE AS  
95. 147-0226 [1] TUBE AS  
96. 147-0256 [1] SHAFT AS-REVERSE  
  163-9091 [1] PLUG  
  147-0270 [1] ORIFICE  
97. 147-0211 [1] ELBOW AS  
  342-3830 [1] ADAPTER  
  3G-6927 [1] ADAPTER  
98. 6Y-7957 [8] DISC-FRICTION  
99. 147-0227 [1] PISTON-CLUTCH  
100. 161-7632 M [16] BOLT-SELF-LOCKING (M10X1.5X40-MM)  
101. 147-0262 [4] WASHER (19.1X24.1X1.5-MM THK)  
102. 147-0266 [2] BOLT (3/4-16X1.417-IN)  
103. 189-5746 Y [1] SENSOR GP-SPEED (OUTPUT)  
104. 1V-6341 [1] SEAL  
105. 3J-1907 [14] SEAL-O-RING  
106. 8T-0643 M [1] BOLT (M10X1.5X80-MM)  
107. 6Y-1896 [1] PLUG AS-DRAIN  
  5P-6718 [1] SEAL-O-RING  
108. 205-9244 [4] PLUG  
109. 9X-6615 M [12] BOLT (M5X0.8X30-MM)  
110. 7T-3253 [2] DOWEL  
111. 7T-3251 [1] BREATHER (TRANSMISSION)  
112. 192-0850 [1] CASE AS  
  370-7751 [1] CASE-FRONT  
  163-9091 [4] PLUG  
  147-0268 [4] PLUG  
113. 122-1883 [1] SPACER (38X45X5-MM THK)  
114. 121-0885 [1] RETAINER  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP35770297
 

192-0849: TRANSMISSION GP-POWER SHIFT

192-0849 TRANSMISSION GP-POWER SHIFT -ALL WHEEL DRIVE
S/N BNB700-UP; BLL651-712
PART OF 202-7432 TRANSMISSION & MOUNTING GP
Type 2
AN ATTACHMENT
i01797259 SEBP3577
1920849 TRANSMISSION GP-POWER SHIFT Parts scheme 1920849 TRANSMISSION GP-POWER SHIFT Parts scheme 1920849 TRANSMISSION GP-POWER SHIFT Parts scheme
  For full view, you need register

Parts for your 428D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 178-9566 [2] SPRING-PISTON  
2. 8C-5748 M [4] BOLT (M8X1.25X55-MM)  
3. 161-3249 [1] RING-RETAINING  
4. 8T-1581 [1] BEARING-TAPERED ROLLER  
5. 150-7732 [2] SEAL-O-RING  
6. 8T-0271 M [2] BOLT-SOCKET HEAD (M10X1.5X35-MM)  
7. 8T-1580 [1] CUP-BEARING  
8. 4F-7952 [1] SEAL-O-RING  
9. 147-0218 [1] TUBE AS  
10. 238-1967 Y [1] VALVE GP-SOLENOID  
11. 8C-8545 M [2] BOLT-SOCKET HEAD (M5X0.8X20-MM)  
12. 120-9762 [5] SEAL-O-RING  
13. 238-1966 Y [1] VALVE GP-SOLENOID  
14. 147-0253 [1] CASE AS-REAR  
  9W-0717 [11] PLUG  
15. 121-7398 [1] SPACER (70X79.5X2-MM THK)  
16. 121-7402 B [1] SHIM (0.6-MM THK)  
17. 121-7401 B [1] SHIM (0.18-MM THK)  
18. 121-7400 B [1] SHIM (0.08-MM THK)  
19. 121-7399 B [1] SHIM (0.05-MM THK)  
20. 7T-2646 [2] SPACER (66X79.5X2.02-MM THK)  
21. 6T-9166 B [2] SHIM (0.051-MM THK)  
22. 6T-9165 B [2] SHIM (0.076-MM THK)  
23. 6T-9164 B [2] SHIM (0.178-MM THK)  
24. 122-1878 [1] RING-SEAL  
25. 147-0201 [1] TUBE AS  
26. 7W-3556 [12] WASHER (14.27X20.57X1.5-MM THK)  
27. 147-0234 [6] BOLT (9/16-18X0.83-IN)  
28. 1U-8846 B SEALANT-GASKET  
29. 5P-8066 [2] SEAL-O-RING  
30. 6V-8097 M [3] BOLT (M12X1.75X30-MM)  
31. 7T-3195 [3] WASHER (12.3X47X6.35-MM THK)  
32. 122-6787 [2] YOKE AS  
33. 216-2267 [2] SEAL-LIP TYPE  
34. 121-7385 Y [1] PUMP GP-TRANSMISSION  
35. 9P-9150 [4] WASHER (8.25X18X0.84-MM THK)  
36. 173-0332 [1] SHAFT AS  
  163-9091 [1] PLUG  
37. 7X-4741 [1] SEAL  
38. 9S-4185 [3] PLUG (3/4-16-THD)  
39. 3K-0360 [3] SEAL-O-RING  
40. 123-8906 [5] CUP-TAPERED ROLLER  
41. 123-8905 [5] CONE-BEARING  
42. 121-0694 [2] WASHER-THRUST (40X70X4-MM THK)  
43. 172-5317 [6] BEARING-SPECIAL  
44. 123-8913 [2] BEARING-ROLLER  
45. 147-0224 [1] GEAR (45/32-TEETH)  
46. 8E-5707 [7] PLATE-END  
47. 6V-8757 [6] RING-RETAINING  
48. 6T-9194 [45] PLATE  
49. 6Y-7929 [37] DISC-FRICTION  
50. 274-8638 [6] RING-RETAINING  
51. 121-2500 [4] WASHER-THRUST (50X70X4-MM THK)  
52. 147-0202 [2] GEAR (45/24-TEETH)  
53. 147-0257 [1] SHAFT AS-INPUT  
  123-2920 [3] PLUG  
54. 9U-8886 [4] RING-SEAL  
55. 123-8910 [1] CUP-TAPERED ROLLER  
56. 123-8909 [1] CONE-BEARING  
57. 7T-6655 [4] BEARING  
58. 147-0259 [2] SPACER (51.1X54.9X18.7-MM THK)  
59. 147-0238 [5] SPRING AS  
60. 6V-5100 [5] SEAL-O-RING  
61. 147-0228 [4] PISTON-CLUTCH  
62. 6T-9196 [7] SEAL  
63. 122-1886 [1] RING-SEAL  
64. 123-8907 [3] CONE-BEARING  
65. 123-8908 [3] CUP-TAPERED ROLLER  
66. 147-0212 [1] GEAR (42-TEETH)  
67. 147-0216 [1] GEAR (38-TEETH)  
68. 147-0203 [3] WASHER-THRUST (45.3X65X5-MM THK)  
69. 147-0258 [1] SPACER (46X50X16-MM THK)  
70. 147-0215 [1] GEAR (45/19-TEETH)  
71. 172-6050 [6] BEARING-SPECIAL  
72. 122-1877 [3] WASHER-THRUST (40X65X4-MM THK)  
73. 6Y-1192 [7] RING-SEAL  
74. 123-8912 [6] BEARING-ROLLER  
75. 9S-4191 [14] PLUG (9/16-18-THD)  
76. 147-0264 [1] GEAR (45/28-TEETH)  
77. 147-0260 [1] RETAINER-SPRING  
78. 095-0928 [1] RING-RETAINING  
79. 147-0205 [2] WASHER (55X78X5-MM THK)  
80. 147-0248 [1] SPACER (56.2X60X15.8-MM THK)  
81. 157-2090 [1] GEAR (38-TEETH)  
82. 172-6743 [2] BEARING-SPECIAL  
83. 147-0242 [1] GEAR (48-TEETH)  
84. 150-3757 [2] BEARING  
85. 009-2062 [2] SEAL-O-RING  
86. 157-2088 [2] PISTON AS  
87. 147-0261 [1] SHAFT AS-OUTPUT (REAR)  
  9W-0717 [2] PLUG  
88. 095-0927 [1] RING-RETAINING  
89. 122-1884 [1] SPACER (45X49X8-MM THK)  
90. 147-0210 [1] GEAR (45/36-TEETH)  
91. 147-0207 [1] SHAFT AS-OUTPUT (FRONT)  
92. 122-1879 [2] SPACER (58X67.5X2-MM THK)  
93. 104-3288 B [2] SHIM (0.05-MM THK)  
94. 121-2059 B [2] SHIM (0.08-MM THK)  
95. 121-2060 B [2] SHIM (0.18-MM THK)  
96. 121-2061 B [2] SHIM (0.6-MM THK)  
97. 147-0211 [1] ELBOW AS  
  3G-6927 [1] ADAPTER  
98. 6Y-7957 [8] DISC-FRICTION  
99. 147-0227 [1] PISTON-CLUTCH  
100. 6V-8335 M [16] BOLT-SELF-LOCKING (M10X1.5X40-MM)  
101. 147-0262 [4] WASHER (19.1X24.1X1.5-MM THK)  
102. 147-0266 [2] BOLT (3/4-16X1.417-IN)  
103. 189-5746 Y [1] SENSOR GP-SPEED (MAGNETIC, LOW OUTPUT)  
104. 1V-6341 [1] SEAL  
105. 3J-1907 [14] SEAL-O-RING  
106. 8T-0643 M [1] BOLT (M10X1.5X80-MM)  
107. 6Y-1896 [1] PLUG AS-DRAIN  
109. 9X-6615 M [12] BOLT (M5X0.8X30-MM)  
110. 7T-3253 [2] DOWEL  
111. 7T-3251 [1] BREATHER (TRANSMISSION)  
112. 192-0850 [1] CASE AS  
  9W-0717 [4] PLUG  
  147-0268 [4] PLUG  
113. 122-1883 [1] SPACER (38X45X5-MM THK)  
114. 121-0885 [1] RETAINER  
115. 205-9244 [4] PLUG  
116. 147-0256 [1] SHAFT AS-REVERSE  
  9W-0717 [1] PLUG  
  147-0270 [1] ORIFICE  
117. 147-0226 [1] TUBE AS  
118. 147-0236 [1] TUBE AS  
119. 6V-8210 M [2] BOLT (M8X1.25X16-MM)  
120. 106-9861 [1] PLATE AS-COVER  
121. 121-4036 Y [2] VALVE GP-SOLENOID  
122. 6T-9202 [2] PLUG  
123. 121-7396 [1] VALVE GP-RELIEF  
124. 147-0209 Y [1] VALVE GP-RELIEF  
125. 9W-5460 [1] RING  
126. 7T-2651 [1] STRAINER-SUCTION  
127. 6T-9163 B [2] SHIM (0.599-MM THK)  
128. 238-1968 Y [1] VALVE GP-SOLENOID  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP35770298
 

147-0209: VALVE GP-RELIEF

147-0209 VALVE GP-RELIEF
S/N BNB700-UP; BLL651-712
PART OF 192-0849 TRANSMISSION GP-POWER SHIFT
AN ATTACHMENT
i00700238 SEBP3577
1470209 VALVE GP-RELIEF Parts scheme
  For full view, you need register

Parts for your 428D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-4744 [1] SEAL-O-RING  
2. 6V-9178 [1] SEAL-O-RING  
3. 106-9586 [1] SEAL-O-RING  
 

#SEBP35770299
 

121-4036: VALVE GP-SOLENOID

121-4036 VALVE GP-SOLENOID
S/N BNB700-UP; BLL651-712
PART OF 201-8562 TRANSMISSION GP-DIRECT DRIVE, 192-0849 TRANSMISSION GP-POWER SHIFT
AN ATTACHMENT
i00482513 SEBP3577
1214036 VALVE GP-SOLENOID Parts scheme
  For full view, you need register

Parts for your 428D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3J-9196 [1] NUT-JAM (1/2-20-THD)  
2. 122-1672 [1] CARTRIDGE AS  
3. 130-0013 [1] COIL AS  
4. 1S-9593 [2] STRAP-CABLE  
  102-8807 [1] KIT-CONNECTING PLUG (2-PIN)  
    (KIT INCLUDES RECEPTACLE AS & WEDGE)
  186-3736 [2] SOCKET-CONNECTOR (16-GA TO 18-GA)  
   
    AVAILABLE REPAIR KIT(S):
  122-1135 [1] KIT-SEAL  
    (INCLUDES RING & SEALS)
 

Information:

Service Magazine
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17

Caterpillar Parts SIS Catalog 428D :

TRANSMISSION GP-DIRECT DRIVE
201-8561 TRANSMISSION GP-DIRECT DRIVE
TRANSMISSION GP-DIRECT DRIVE
192-0842 TRANSMISSION GP-DIRECT DRIVE
185-7587 TRANSMISSION AR-POWER SHIFT
185-7586 TRANSMISSION AR-DIRECT DRIVE
185-7585 TRANSMISSION AR-DIRECT DRIVE
TRANSMISSION & MOUNTING GP
202-7432 TRANSMISSION & MOUNTING GP
TRANSMISSION & MOUNTING GP
202-6008 TRANSMISSION & MOUNTING GP
TRANSMISSION & MOUNTING GP
202-6007 TRANSMISSION & MOUNTING GP
TRANSMISSION GP-DIRECT DRIVE
201-8562 TRANSMISSION GP-DIRECT DRIVE
TRANSMISSION GP-DIRECT DRIVE
201-8562 TRANSMISSION GP-DIRECT DRIVE
TRANSMISSION GP-DIRECT DRIVE
201-8562 TRANSMISSION GP-DIRECT DRIVE
TRANSMISSION GP-DIRECT DRIVE
201-8562 TRANSMISSION GP-DIRECT DRIVE
TRANSMISSION GP-DIRECT DRIVE
452-5086 TRANSMISSION GP-DIRECT DRIVE
TRANSMISSION GP-POWER SHIFT
192-0849 TRANSMISSION GP-POWER SHIFT
TRANSMISSION GP-POWER SHIFT
192-0849 TRANSMISSION GP-POWER SHIFT
VALVE GP-RELIEF
147-0209 VALVE GP-RELIEF

Truck sale:

Caterpillar 428D
 
Caterpillar 428D
- backhoe loader
BERGERAT MONNOYEUR SP. Z O.O.
 
 
Caterpillar 428D, Construction
- backhoe loader
BERGERAT MONNOYEUR S.A.S.
Belgium
 
 
Caterpillar 428D, Construction
- backhoe loader
BERGERAT MONNOYEUR S.A.S.
Belgium
 
 
Caterpillar 428D, Construction
- backhoe loader
BERGERAT MONNOYEUR S.A.S.
Belgium
Caterpillar 428D, Construction
 
Caterpillar 428D, Construction
- backhoe loader
WILLIAM ADAMS PTY. LTD.
Australia
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.