AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

197-7237 PUMP GP-FUEL INJECTION S/N 7BJ19000-UP PART OF 188-0883, 204-5372 ENGINE AR-PRIMARY 428D BACKHOE LOADER


FUEL SYSTEM
PUMP GP-FUEL INJECTION
SEPARATOR GP-WATER
TANK GP-FUEL
BASIC ENGINE
PULLEY GP

BACKHOE LOADER 428D BACKHOE LOADER BMT
 428D Backhoe Loader BMT01618-03227 (MACHINE) POWERED BY 3054 Engine SEBP3578 428D BMT   (1999)

FUEL SYSTEM

PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
197-7237 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
197-7237 PUMP GP-FUEL INJECTION
 

#SEBP35780150
 

197-7237: PUMP GP-FUEL INJECTION

197-7237 PUMP GP-FUEL INJECTION
S/N 7BJ19000-UP
PART OF 188-0883, 204-5372 ENGINE AR-PRIMARY
i01438091 SEBP3578
1977237 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 428D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-0217 M [1] BOLT (M8X1.25X20-MM)  
2. 6I-0291 M [4] NUT (M8X1.25-THD)  
3. 035-8063 [1] PLUG  
4. 067-6998 [1] NUT (3/8-24-THD)  
5. 067-6999 [1] FERRULE  
6. 100-4830 M [1] BOLT (M10X1.5X20-MM)  
7. 124-3713 [1] CONNECTION  
8. 124-3714 [3] BOLT  
9. 124-3815 M [4] BOLT (M8X1.25X16-MM)  
10. 140-8713 [2] CLIP  
11. 140-8714 [1] CLIP  
12. 140-8718 [4] WASHER  
13. 140-8719 [1] LINE-LEAKOFF  
14. 140-8720 [8] WASHER  
15. 142-4248 [1] BRACKET  
16. 154-6015 [3] STUD  
17. 154-6016 [1] GEAR-PUMP (56-TEETH)  
18. 170-0580 [1] TUBE AS (CYLINDER ONE)  
19. 211-1872 [1] TUBE AS (CYLINDER TWO)  
20. 170-0582 [1] TUBE AS (CYLINDER THREE)  
21. 170-0583 [1] TUBE AS (CYLINDER FOUR)  
22. 170-2377 [1] CAP  
23. 170-2387 [4] INJECTOR AS-FUEL  
    (EACH INCLUDES)
24. 147-6240 [1] HOLDER  
25. 170-2388 [1] NOZZLE  
26. 173-7527 [1] SWITCH AS-TEMPERATURE (TIMING ADVANCE)  
28. 185-6374 [1] TUBE AS  
31. 213-4881 [1] PUMP GP-FUEL INJECTION  
31A. 152-3968 [1] SEAL-O-RING  
31B. 176-6219 [1] SOLENOID (12-VOLT)  
31C. 141-8947 [1] THERMOCOUPLE  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP35780151
 

197-7237: PUMP GP-FUEL INJECTION

197-7237 PUMP GP-FUEL INJECTION
S/N 7BJ25913-UP
PART OF 188-0883, 204-5372 ENGINE AR-PRIMARY
i02212169 SEBP3578
1977237 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 428D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-0217 M [1] BOLT (M8X1.25X20-MM)  
2. 6I-0291 M [4] NUT (M8X1.25-THD)  
3. 035-8063 [1] PLUG  
4. 067-6998 [1] NUT (3/8-24-THD)  
5. 067-6999 [1] FERRULE  
6. 100-4830 M [1] BOLT (M10X1.5X20-MM)  
7. 247-9855 C [1] BOLT (M6X1X30-MM)  
8. 247-9844 C [3] BOLT (M6X1X16-MM)  
9. 124-3815 M [4] BOLT (M8X1.25X16-MM)  
10. 140-8713 [2] CLIP  
11. 140-8714 [1] CLIP  
12. 140-8718 [4] WASHER  
13. 140-8719 [1] LINE-LEAKOFF  
14. 241-4754 C [8] WASHER (6.35X9.75X1.55-MM THK)  
15. 142-4248 [1] BRACKET  
16. 154-6015 [3] STUD  
17. 154-6016 [1] GEAR-PUMP (56-TEETH)  
18. 170-0580 [1] TUBE AS (CYLINDER ONE)  
19. 211-1872 [1] TUBE AS (CYLINDER TWO)  
20. 170-0582 [1] TUBE AS (CYLINDER THREE)  
21. 170-0583 [1] TUBE AS (CYLINDER FOUR)  
22. 170-2377 [1] CAP  
23. 170-2387 [4] INJECTOR AS-FUEL  
    (EACH INCLUDES)
24. 147-6240 [1] HOLDER  
25. 170-2388 [1] NOZZLE  
26. 173-7527 [1] SWITCH AS-TEMPERATURE (TIMING ADVANCE)  
28. 185-6374 [1] TUBE AS  
31. 213-4881 [1] PUMP GP-FUEL INJECTION  
31A. 152-3968 [1] SEAL-O-RING  
31B. 176-6219 [1] SOLENOID (12-VOLT)  
31C. 141-8947 [1] THERMOCOUPLE  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP35780152
 

179-8291: SEPARATOR GP-WATER

179-8291 SEPARATOR GP-WATER
S/N BNS1118-1851; BMT1618-3227
PART OF 186-0204 SEPARATOR GP-WATER
AN ATTACHMENT
i01382691 SEBP3578
  For full view, you need register

Parts for your 428D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  131-1812 [1] FILTER ELEMENT-FUEL (WATER SEPARATOR)  
  121-4480 [1] KIT-WATER BASE (WATER SEPARATOR)  
  118-8119 [1] NUT  
  118-8118 [1] RING-RETAINING  
  193-0618 [1] SENSOR GP-MOISTURE (WATER SEPARATOR)  
  192-7875 [1] SENSOR AS  
  3E-3371 [1] WEDGE-RECEPTACLE LOCK (3-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  9X-3401 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  192-7876 [1] SCREW-MOUNTING  
  192-7877 [1] RETAINER  
 

#SEBP35780153
 

186-0204: SEPARATOR GP-WATER

186-0204 SEPARATOR GP-WATER
S/N BNS1118-1851; BMT1618-3227
PART OF 184-9743 CAB AR-ENCLOSED ROPS
AN ATTACHMENT
i01382670 SEBP3578
1860204 SEPARATOR GP-WATER Parts scheme
  For full view, you need register

Parts for your 428D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 179-8291 Y [1] SEPARATOR GP-WATER (ELECTRONIC)  
2. 8T-4196 M [2] BOLT (M10X1.5X35-MM)  
3. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
4. 130-7964 [1] TUBE AS  
5. 127-8167 [2] CLIP  
6. 9R-2603 [1] TUBE AS  
7. 4H-2494 [3] SLEEVE-FITTING  
8. 033-7849 [2] PLUG  
9. 032-8100 [2] WASHER (0.531X0.718X0.064-IN THK)  
10. 4P-7581 [1] CLIP (LADDER)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP35780154
 

7E-4636: SEPARATOR GP-WATER

7E-4636 SEPARATOR GP-WATER
S/N BNS1118-1851; BMT1618-3227
PART OF 184-9742 CAB AR-ENCLOSED ROPS, 184-9741 CANOPY AR-OPEN ROPS
AN ATTACHMENT
i00405056 SEBP3578
7E4636 SEPARATOR GP-WATER Parts scheme
  For full view, you need register

Parts for your 428D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 130-7092 Y [1] FILTER GP-WATER SEP & FUEL  
2. 8T-4196 M [2] BOLT (M10X1.5X35-MM)  
3. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
4. 130-7964 [1] TUBE AS  
5. 127-8167 [2] CLIP  
6. 9R-2603 [1] TUBE AS  
7. 4H-2494 [3] SLEEVE-FITTING  
8. 033-7849 [2] PLUG  
9. 032-8100 [2] WASHER (0.531X0.718X0.064-IN THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP35780155
 

202-6019: TANK GP-FUEL

202-6019 TANK GP-FUEL
S/N BNS1118-1851; BMT1618-3227
PART OF 202-6051 TANK GP-FUEL
i01596855 SEBP3578
2026019 TANK GP-FUEL Parts scheme
  For full view, you need register

Parts for your 428D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 201-0330 [1] CAP GP-FUEL FILLER (LOCKABLE, VENTED)  
2. 201-1835 [1] TUBE AS  
3. 201-1836 [1] TANK AS-FUEL  
4. 106-8020 [1] GASKET  
5. 123-4950 M [8] SCREW-PAN HEAD (M6X1X16-MM)  
6. 148-8316 [1] CONNECTOR AS  
  3J-7354 [1] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
  6V-8647 [1] CONNECTOR  
7. 148-8326 [1] CONNECTOR AS  
  3J-7354 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-9872 [1] CONNECTOR  
8. 148-8407 [1] PLUG AS  
  3J-1907 [1] SEAL-O-RING  
  9S-4191 [1] PLUG (9/16-18-THD)  
   
  180-3730 F [1] STRAINER-FUEL (FILLER NECK SCREEN)(SCREEN)  
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP35780156
 

202-6051: TANK GP-FUEL

202-6051 TANK GP-FUEL
S/N BNS1118-1851; BMT1618-3227
PART OF 184-7869, 185-5789 CHASSIS AR
i01626947 SEBP3578
2026051 TANK GP-FUEL Parts scheme
  For full view, you need register

Parts for your 428D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-1442 E HOSE (108CM)  
2. 5P-6442 E HOSE (60CM)  
3. 1P-4278 [2] CLAMP-HOSE  
4. 6S-8620 [2] CLAMP-HOSE  
5. 8B-6127 [1] CLIP  
6. 8L-8413 [1] STRAP-CABLE (WHITE)  
7. 9R-7240 [1] GASKET  
8. 131-0232 [1] COVER  
9. 149-7678 [1] TUBE AS  
10. 164-3876 [1] STEP AS  
11. 187-8936 [1] SENDER AS-FUEL LEVEL  
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (KIT SERVICES RECEPTACLE AS & WEDGE)
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
12. 190-1118 [1] TUBE AS  
13. 190-5123 [1] PLATE AS  
14. 190-9838 [1] TUBE AS  
15. 201-1837 [1] TREAD  
16. 202-6019 Y [1] TANK GP-FUEL  
17. 123-4950 M [5] SCREW-PAN HEAD (M6X1X16-MM)  
18. 2B-2404 [1] CLIP  
19. 5P-4116 [7] WASHER-HARD (8.8X20.5X2-MM THK)  
20. 5P-7854 [1] CLIP  
21. 6D-7573 [1] CLIP  
22. 6K-8178 [1] CLIP (LOOP)  
23. 8T-1159 M [1] BOLT-SOCKET HEAD (M10X1.5X25-MM)  
24. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
25. 8T-4133 M [1] NUT (M10X1.5-THD)  
26. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
27. 8T-4179 M [1] BOLT (M12X1.75X20-MM)  
28. 8T-4183 M [4] BOLT (M12X1.75X40-MM)  
29. 8T-4189 M [7] BOLT (M8X1.25X20-MM)  
30. 8T-4200 M [4] BOLT (M8X1.25X16-MM)  
31. 8T-4223 [5] WASHER-HARD (13.5X25.5X3-MM THK)  
32. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP35780157
 

105-2812: ALTERNATOR GP-CHARGING

105-2812 ALTERNATOR GP-CHARGING
S/N BNS1118-1851; BMT1618-3227
12 VOLT, 55 AMP
PART OF 202-5748 ALTERNATOR GP-CHARGING
AN ATTACHMENT
i00479586 SEBP3578
1052812 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your 428D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5C-2890 M [1] NUT (M6X1-THD)  
2. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
3. 1H-3244 [1] LOCKWASHER  
4. 114-2863 [1] PULLEY-ALTERNATOR  
5. 114-2865 [1] FRAME AS-ALTERNATOR  
6. 114-2866 [1] ROTOR AS-ALTERNATOR  
7. 114-2867 [1] FRAME-ALTERNATOR  
8. 114-2868 [1] REGULATOR AS-ALTERNATOR  
9. 114-2869 [1] RECTIFIER AS-ALTERNATOR  
10. 114-2870 [1] HOLDER AS  
11. 114-2871 [1] COVER-ALTERNATOR  
12. 114-2872 [1] BUSHING-ALTERNATOR  
   
    AVAILABLE REPAIR KIT(S):
  114-2873 [1] KIT-ALTERNATOR BEARING  
    (INCLUDES COVERS, BEARINGS, WASHER,PLATE & SCREW)
  114-2874 [1] KIT-ALTERNATOR HARDWARE  
    (INCLUDES NUTS & BOLTS)
  114-2875 [1] KIT-ALTERNATOR HARDWARE  
    (INCLUDES SCREWS)
  M   METRIC PART
 

#SEBP35780158
 

105-2813: ALTERNATOR GP-CHARGING

105-2813 ALTERNATOR GP-CHARGING
S/N BNS1118-1851; BMT1618-3227
12-VOLT. 90-AMP
PART OF 202-5749 ALTERNATOR GP-CHARGING
AN ATTACHMENT
i00798710 SEBP3578
1052813 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your 428D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 113-4457 [1] PULLEY-ALTERNATOR  
2. 113-4459 [1] FRAME AS-ALTERNATOR  
3. 113-4460 [1] ROTOR AS-ALTERNATOR  
4. 113-4461 [1] FRAME AS-ALTERNATOR  
5. 113-4462 [1] REGULATOR AS-ALTERNATOR  
6. 113-4463 [1] RECTIFIER AS-ALTERNATOR  
7. 113-4464 [1] COVER-ALTERNATOR  
8. 113-4469 [4] BUSHING-ALTERNATOR  
9. 113-4470 [1] BUSHING-ALTERNATOR  
10. 5C-2890 M [1] NUT (M6X1-THD)  
11. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
12. 1H-3244 [1] LOCKWASHER  
   
    AVAILABLE REPAIR KIT(S):
  113-4465 [1] KIT-ALTERNATOR BEARING  
    (INCLUDES COVERS, BEARINGS, WASHER, PLATE & SCREW)
  113-4466 [1] KIT-REPAIR (ALTERNATOR BRUSHES)  
    (INCLUDES SEALS & HOLDER AS)
  113-4467 [1] KIT-ALTERNATOR TERMINAL  
    (INCLUDES NUTS, PLATE & SCREW)
  113-4468 [1] KIT-ALTERNATOR HARDWARE  
    (INCLUDES SCREWS)
  M   METRIC PART
 

#SEBP35780159
 

202-5748: ALTERNATOR GP-CHARGING

202-5748 ALTERNATOR GP-CHARGING
S/N BNS1118-1851; BMT1618-3227
55 AMP
AN ATTACHMENT
i01655587 SEBP3578
  For full view, you need register

Parts for your 428D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  105-2812 Y [1] ALTERNATOR GP-CHARGING  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

Information:

Truck Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/01
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
2008/11/01
Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Specifications
Fuel Injection Pump
3054 Engine
Fuel Injection Nozzles
3054 Engine
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Reuse And Salvage Guidelines
Reuse and Salvage for Fuel Injection Pumps and Nozzles on 3044, 3046, 3064, and 3066 Engines {1251}
Reuse and Salvage for Fuel Injection Pumps and Nozzles on 3044, 3046, 3064, and 3066 Engines {1251}
Testing and Adjusting
Fuel Injection Nozzle - Test
3054 Engine
Disassembly and Assembly
Fuel Injection Nozzles - Remove - Type 1 Engines and 9RM Engines
3054 Engine for Caterpillar Built Machines
Fuel Injection Nozzles - Remove
3054 Engine for Caterpillar Built Machines
Fuel Injection Nozzles - Install - Type 1 Engines and 9RM Engines
3054 Engine for Caterpillar Built Machines
Fuel Injection Nozzles - Install
3054 Engine for Caterpillar Built Machines
Fuel Injection Pump - Remove - Type 1 Engines and 9RM Engines
3054 Engine for Caterpillar Built Machines
Fuel Injection Pump - Install - Type 1 Engines and 9RM Engines
3054 Engine for Caterpillar Built Machines
Fuel Injection Pump - Remove - Type 2 Engines and 7BJ Engines
3054 Engine for Caterpillar Built Machines
Fuel Injection Pump - Install - Type 2 Engines and 7BJ Engines
3054 Engine for Caterpillar Built Machines
Service Magazine
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17

Caterpillar Parts SIS Catalog 428D :

FITTING GP-FUEL LINES
130-4646 FITTING GP-FUEL LINES
FILTER GP-WATER SEP & FUEL
130-7092 FILTER GP-WATER SEP & FUEL
FILTER GP-FUEL
138-3096 FILTER GP-FUEL
FILTER & LINES GP-FUEL
197-3924 FILTER & LINES GP-FUEL
CONTROL GP-GOVERNOR
164-1076 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
164-1076 CONTROL GP-GOVERNOR
TURBOCHARGER GP
219-9773 TURBOCHARGER GP
TURBOCHARGER GP
219-9773 TURBOCHARGER GP
PUMP GP-FUEL INJECTION
197-7237 PUMP GP-FUEL INJECTION
179-8291 SEPARATOR GP-WATER
SEPARATOR GP-WATER
186-0204 SEPARATOR GP-WATER
SEPARATOR GP-WATER
7E-4636 SEPARATOR GP-WATER
TANK GP-FUEL
202-6019 TANK GP-FUEL
TANK GP-FUEL
202-6051 TANK GP-FUEL
ALTERNATOR GP-CHARGING
105-2812 ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
105-2813 ALTERNATOR GP-CHARGING

Truck sale:

Caterpillar 428D
 
Caterpillar 428D
- backhoe loader
BERGERAT MONNOYEUR SP. Z O.O.
 
 
Caterpillar 428D, Construction
- backhoe loader
BERGERAT MONNOYEUR S.A.S.
Belgium
 
 
Caterpillar 428D, Construction
- backhoe loader
BERGERAT MONNOYEUR S.A.S.
Belgium
 
 
Caterpillar 428D, Construction
- backhoe loader
BERGERAT MONNOYEUR S.A.S.
Belgium
Caterpillar 428D, Construction
 
Caterpillar 428D, Construction
- backhoe loader
WILLIAM ADAMS PTY. LTD.
Australia
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.