190-1020 WIRING GP-CAB S/N D3C241-262 PART OF 234-1620 CAB GP 330C MH EXCAVATOR

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 190-1020 WIRING GP-
1. 190-1020 WIRING GP-
2. 190-1020 WIRING GP-
3. 222-7905 WIRING GP-
4. 275-7219 WIRING GP-
5. 170-6909 WIRING GP-
6. 220-2152 WIRING GP-
7. 222-4426 WIRING GP-
8. 204-3604 WIRING GP-
9. 204-3604 WIRING GP-
0. INFORMATION

EXCAVATOR 330C MH EXCAVATOR D3C
330C Hydraulic Material Handler D3C00001-UP (MACHINE) POWERED BY C-9 Engine SEBP3587 330C MH D3C (2001)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

190-1020 WIRING GP-CAB

222-7905 WIRING GP-CAB RISER

#SEBP35870230

190-1020: WIRING GP-CAB

WIRING GP-CAB

190-1020 WIRING GP-CAB
S/N D3C241-262
PART OF 234-1620 CAB GP

i02307539 SEBP3587

For full view, you need register

Parts for your 330C MH EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9W-1494	[1]	KIT-SERVICE METER (24-VOLT)
2.	9W-0335	[1]	LIGHTER AS-CIGAR (24-VOLT)
3.	4I-3064 E		GUARD (10CM)
4.	163-6795 C	[18]	STRAP-CABLE
5.	198-5959	[1]	HARNESS AS-CAB (CAB)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, INTERFACE SEAL & WEDGE)
6.	8T-6693 M	[2]	SCREW-MACHINE (M5X0.8X16-MM)
7.	8T-0328	[6]	WASHER-HARD (5.5X10X1-MM THK)
8.	163-6810	[1]	HARNESS AS-MONITOR
9.	7Y-5226 M	[2]	NUT (M5X0.8-THD)
10.	095-0736 M	[2]	SCREW-MACHINE (M5X0.8X10-MM)
11.	096-5962	[4]	WASHER-HARD (3.4X7X0.8-MM THK)
12.	163-6701	[1]	PANEL AS-CONTROL
13.	132-1829 Y	[1]	ALARM GP (24-VOLT)
14.	9X-2042 M	[1]	SCREW-TRUSS HEAD (M6X1X12-MM)
15.	163-6719	[1]	SWITCH AS-ROCKER (WINDOW WASHER)
	167-3542	[1]	RECEPTACLE-CONNECTOR (5-PIN)
	167-3543	[4]	TERMINAL (MALE)
16.	7K-1181	[2]	STRAP-CABLE
17.	6V-9669 M	[2]	SCREW-MACHINE (M3X0.5X8-MM)
18.	3C-6969 M	[2]	NUT (M3X0.5-THD)
19.	167-3492	[1]	ANTENNA AS
	7Y-5285 M	[1]	SCREW AS (M4X0.7X8-MM)
	106-0035	[1]	ROD AS
20.	197-0393 M	[2]	BOLT-SOCKET HEAD
21.	163-6718	[1]	SWITCH AS-ROCKER (WINDOW WIPER)
	167-3543	[5]	TERMINAL (MALE)
	167-3542	[1]	RECEPTACLE-CONNECTOR (5-PIN)
22.	163-6722	[1]	SWITCH AS-ROCKER (FINE SWING CONTROL)
	167-3542	[1]	RECEPTACLE-CONNECTOR (5-PIN)
	167-3543	[5]	TERMINAL (MALE)
23.	221-8845 CY	[1]	MONITOR GP-OPERATOR
24.	9X-2040 M	[2]	SCREW-TRUSS HEAD (M10X1.5X25-MM)
25.	163-6814	[1]	COVER (RH)
26.	163-6813	[1]	COVER (LH)
27.	8T-4970 M	[6]	BOLT (M6X1X14-MM)
28.	9X-8256 C	[18]	WASHER (6.6X12X2-MM THK)
29.	167-3441	[2]	LAMP GP-FLOOD (24-VOLT)
	9X-3463	[1]	LAMP-HALOGEN (24-VOLT, 70-WATT)
30.	8T-4190 M	[2]	BOLT (M16X2X25-MM)
31.	167-3437	[1]	BRACKET AS (LH)
32.	167-3456	[2]	HARNESS AS-LIGHTING (CAB FLOODLIGHT)
33.	8T-4199 M	[2]	BOLT (M8X1.25X12-MM)
34.	8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)
35.	9X-8257	[2]	WASHER (17.5X30X3.5-MM THK)
36.	167-3438	[1]	BRACKET AS (RH)
37.	167-7083	[1]	SENSOR AS (SUNLIGHT FOR AIR CONDITIONER)
38.	8T-6411 CM	[8]	SCREW-MACHINE (M6X1X12-MM)
39.	217-2317 Y	[1]	CONTROL GP-HEAT & AIR COND (TEMPERATURE CONTROL)
	217-2318	[1]	CLIP
40.	169-5509	[1]	HARNESS AS-HEATER & AIR COND (TO KEYPAD, SUN SENSOR)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
			(INCLUDES PLUG AS, INTERFACE SEAL & WEDGE
41.	163-6708	[1]	RADIO GP (AM/FM)
42.	3S-2093	[6]	STRAP-CABLE
43.	101-2846 E		GUARD (18CM)
44.	M	[8]	SCREW-PAN HEAD (M4X0.7X16-MM)
45.	6T-7695	[2]	SPEAKER AS-RADIO
46.	167-7023	[1]	BRACKET
47.	191-6905	[1]	COVER
48.	9X-2045 M	[1]	SCREW-TRUSS HEAD (M6X1X20-MM)
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP35870231

190-1020: WIRING GP-CAB

WIRING GP-CAB

190-1020 WIRING GP-CAB
S/N D3C263-303
PART OF 234-1620 CAB GP

i02348712 SEBP3587

For full view, you need register

Parts for your 330C MH EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9W-1494	[1]	KIT-SERVICE METER (24-VOLT)
2.	9W-0335	[1]	LIGHTER AS-CIGAR (24-VOLT)
3.	4I-3064 E		GUARD (10CM)
4.	163-6795 C	[18]	STRAP-CABLE
5.	198-5959	[1]	HARNESS AS-CAB (CAB)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, INTERFACE SEAL & WEDGE)
6.	8T-6693 M	[2]	SCREW-MACHINE (M5X0.8X16-MM)
7.	8T-0328	[6]	WASHER-HARD (5.5X10X1-MM THK)
8.	163-6810	[1]	HARNESS AS-MONITOR
9.	7Y-5226 M	[2]	NUT (M5X0.8-THD)
10.	095-0736 M	[2]	SCREW-MACHINE (M5X0.8X10-MM)
11.	096-5962	[4]	WASHER-HARD (3.4X7X0.8-MM THK)
12.	163-6701	[1]	PANEL AS-CONTROL
13.	132-1829 Y	[1]	ALARM GP (24-VOLT)
14.	9X-2042 M	[1]	SCREW-TRUSS HEAD (M6X1X12-MM)
15.	163-6719	[1]	SWITCH AS-ROCKER (WINDOW WASHER)
	167-3542	[1]	RECEPTACLE-CONNECTOR (5-PIN)
	167-3543	[4]	TERMINAL (MALE)
16.	7K-1181	[2]	STRAP-CABLE
17.	6V-9669 M	[2]	SCREW-MACHINE (M3X0.5X8-MM)
18.	3C-6969 M	[2]	NUT (M3X0.5-THD)
19.	167-3492	[1]	ANTENNA AS
	7Y-5285 M	[1]	SCREW AS (M4X0.7X8-MM)
	106-0035	[1]	ROD AS
20.	197-0393 M	[2]	BOLT-SOCKET HEAD
21.	163-6718	[1]	SWITCH AS-ROCKER (WINDOW WIPER)
	167-3543	[5]	TERMINAL (MALE)
	167-3542	[1]	RECEPTACLE-CONNECTOR (5-PIN)
22.	163-6722	[1]	SWITCH AS-ROCKER (FINE SWING CONTROL)
	167-3542	[1]	RECEPTACLE-CONNECTOR (5-PIN)
	167-3543	[5]	TERMINAL (MALE)
23.	247-5148 CY	[1]	SERVICE GP-MONITOR
24.	9X-2040 M	[2]	SCREW-TRUSS HEAD (M10X1.5X25-MM)
25.	163-6814	[1]	COVER (RH)
26.	163-6813	[1]	COVER (LH)
27.	8T-4970 M	[6]	BOLT (M6X1X14-MM)
28.	9X-8256 C	[18]	WASHER (6.6X12X2-MM THK)
29.	167-3441	[2]	LAMP GP-FLOOD (24-VOLT)
	9X-3463	[1]	LAMP-HALOGEN (24-VOLT, 70-WATT)
30.	8T-4190 M	[2]	BOLT (M16X2X25-MM)
31.	167-3437	[1]	BRACKET AS (LH)
32.	167-3456	[2]	HARNESS AS-LIGHTING (CAB FLOODLIGHT)
33.	8T-4199 M	[2]	BOLT (M8X1.25X12-MM)
34.	8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)
35.	9X-8257	[2]	WASHER (17.5X30X3.5-MM THK)
36.	167-3438	[1]	BRACKET AS (RH)
37.	167-7083	[1]	SENSOR AS (SUNLIGHT FOR AIR CONDITIONER)
38.	8T-6411 CM	[8]	SCREW-MACHINE (M6X1X12-MM)
39.	217-2317 Y	[1]	CONTROL GP-HEAT & AIR COND (TEMPERATURE CONTROL)
	217-2318	[1]	CLIP
40.	169-5509	[1]	HARNESS AS-HEATER & AIR COND (TO KEYPAD, SUN SENSOR)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
			(INCLUDES PLUG AS, INTERFACE SEAL & WEDGE
41.	163-6708	[1]	RADIO GP (AM/FM)
42.	3S-2093	[6]	STRAP-CABLE
43.	101-2846 E		GUARD (18CM)
44.	M	[8]	SCREW-PAN HEAD (M4X0.7X16-MM)
45.	6T-7695	[2]	SPEAKER AS-RADIO
46.	167-7023	[1]	BRACKET
47.	191-6905	[1]	COVER
48.	9X-2045 M	[1]	SCREW-TRUSS HEAD (M6X1X20-MM)
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP35870232

190-1020: WIRING GP-CAB

WIRING GP-CAB

190-1020 WIRING GP-CAB
S/N D3C304-UP
PART OF 234-1620 CAB GP

i02485741 SEBP3587

For full view, you need register

Parts for your 330C MH EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9W-1494	[1]	KIT-SERVICE METER (24-VOLT)
2.	9W-0335	[1]	LIGHTER AS-CIGAR (24-VOLT)
3.	4I-3064 E		GUARD (10-CM)
4.	163-6795	[18]	STRAP-CABLE
5.	198-5959	[1]	HARNESS AS-CAB (CAB)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, INTERFACE SEAL & WEDGE)
6.	8T-6693 M	[2]	SCREW-MACHINE (M5X0.8X16-MM)
7.	8T-0328	[8]	WASHER-HARD (5.5X10X1-MM THK)
8.	163-6810	[1]	HARNESS AS-MONITOR
9.	7Y-5226 M	[2]	NUT (M5X0.8-THD)
10.	095-0736 M	[4]	SCREW-MACHINE (M5X0.8X10-MM)
11.	096-5962	[4]	WASHER-HARD (3.4X7X0.8-MM THK)
12.	163-6701	[1]	PANEL AS-CONTROL
13.	132-1829 Y	[1]	ALARM GP (24-VOLT)
14.	9X-2042 M	[1]	SCREW-TRUSS HEAD (M6X1X12-MM)
15.	163-6719	[1]	SWITCH AS-ROCKER (WINDOW WASHER)
	167-3542	[1]	RECEPTACLE-CONNECTOR (5-PIN)
	167-3543	[4]	TERMINAL (MALE)
16.	7K-1181	[2]	STRAP-CABLE
17.	6V-9669 M	[2]	SCREW-MACHINE (M3X0.5X8-MM)
18.	3C-6969 M	[2]	NUT (M3X0.5-THD)
19.	167-3492	[1]	ANTENNA AS
	7Y-5285 M	[1]	SCREW AS (M4X0.7X8-MM)
	106-0035	[1]	ROD AS
20.	197-0393 M	[2]	BOLT-SOCKET HEAD
21.	163-6718	[1]	SWITCH AS-ROCKER (WINDOW WIPER)
	167-3543	[5]	TERMINAL (MALE)
	167-3542	[1]	RECEPTACLE-CONNECTOR (5-PIN)
22.	163-6722	[1]	SWITCH AS-ROCKER (FINE SWING CONTROL)
	167-3542	[1]	RECEPTACLE-CONNECTOR (5-PIN)
	167-3543	[5]	TERMINAL (MALE)
23.	260-2158 CY	[1]	MONITOR GP-OPERATOR
24.	9X-2040 M	[2]	SCREW-TRUSS HEAD (M10X1.5X25-MM)
25.	163-6814	[1]	COVER (RH)
26.	163-6813	[1]	COVER (LH)
27.	8T-4970 M	[6]	BOLT (M6X1X14-MM)
28.	9X-8256	[18]	WASHER (6.6X12X2-MM THK)
29.	167-3441	[2]	LAMP GP-FLOOD (24-VOLT)
	9X-3463	[1]	LAMP-HALOGEN (24-VOLT, 70-WATT)
30.	8T-4190 M	[2]	BOLT (M16X2X25-MM)
31.	167-3437	[1]	BRACKET AS (LH)
32.	167-3456	[2]	HARNESS AS-LIGHTING (CAB FLOODLIGHT)
33.	8T-4199 M	[2]	BOLT (M8X1.25X12-MM)
34.	8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)
35.	9X-8257	[2]	WASHER (17.5X30X3.5-MM THK)
36.	167-3438	[1]	BRACKET AS (RH)
37.	167-7083	[1]	SENSOR AS (SUNLIGHT FOR AIR CONDITIONER)
38.	8T-6411 M	[8]	SCREW-MACHINE (M6X1X12-MM)
39.	217-2317 Y	[1]	CONTROL GP-HEAT & AIR COND (TEMPERATURE CONTROL)
	217-2318	[1]	CLIP
40.	169-5509	[1]	HARNESS AS-HEATER & AIR COND (TO KEYPAD, SUN SENSOR)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
			(INCLUDES PLUG AS, INTERFACE SEAL & WEDGE
41.	163-6708	[1]	RADIO GP (AM/FM)
42.	3S-2093	[5]	STRAP-CABLE
43.	101-2846 E		GUARD (18-CM)
44.	M	[8]	SCREW-PAN HEAD (M4X0.7X16-MM)
45.	6T-7695	[2]	SPEAKER AS-RADIO
46.	167-7023	[1]	BRACKET
47.	191-6905	[1]	COVER
48.	9X-2045 M	[1]	SCREW-TRUSS HEAD (M6X1X20-MM)
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP35870233

222-7905: WIRING GP-CAB RISER

WIRING GP-CAB RISER

222-7905 WIRING GP-CAB RISER
S/N D3C1-UP
PART OF 211-2137 RISER AR-CAB

i01789989 SEBP3587

2227905 WIRING GP-CAB RISER Parts scheme

For full view, you need register

Parts for your 330C MH EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-4137 M	[15]	BOLT (M10X1.5X20-MM)
2.	8T-4121	[23]	WASHER-HARD (11X21X2.5-MM THK)
3.	111-4838	[10]	CLIP
4.	111-4839	[10]	STRAP
5.	222-7904	[1]	HARNESS AS
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			( EACH CONNECTING PLUG KIT INCLUDES PLUG AS, INTERFACE SEAL & WEDGE)
6.	5C-7883 M	[4]	BOLT-SOCKET HEAD (M6X1X16-MM)
7.	9X-8256	[4]	WASHER (6.6X12X2-MM THK)
8.	163-6786	[1]	BRACKET
9.	8T-4191 M	[5]	BOLT (M10X1.5X16-MM)
10.	116-0118	[4]	CLIP
11.	128-8886	[1]	STRAP AS-GROUND
12.	145-0603	[1]	GROMMET
13.	5I-4366	[1]	GROMMET
14.	151-6667	[1]	SUPPORT AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
15.	8T-4136 M	[3]	BOLT (M10X1.5X25-MM)
16.	139-2118	[1]	SWITCH AS-TOGGLE (ENGINE SHUTDOWN)
	3E-3365	[1]	WEDGE-RECEPTACLE LOCK (2-PIN)
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
17.	231-4502	[1]	GUARD
18.	204-1771	[1]	PLATE
19.	109-0361	[1]	FILM-INSTRUCTION (ENGINE SHUTDOWN)
20.	111-4837	[3]	CLIP
	M		METRIC PART

#SEBP35870234

275-7219: WIRING GP-COLD WEATHER

WIRING GP-COLD WEATHER

275-7219 WIRING GP-COLD WEATHER -COOLING CIRCUIT, HYDRAULIC OIL
S/N D3C1-UP
PART OF 275-3770 COOLING AR
AN ATTACHMENT

i02509137 SEBP3587

2757219 WIRING GP-COLD WEATHER Parts scheme

For full view, you need register

Parts for your 330C MH EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	275-7220	[1]	HARNESS AS-WIRING (FLOW CONTROL)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
2.	7K-1181	[29]	STRAP-CABLE
3.	4P-7581	[1]	CLIP (LADDER)
4.	204-1611	[4]	STRAP (DUAL)
5.	4P-7429	[1]	CLIP (LADDER)

#SEBP35870235

170-6909: WIRING GP-CONSOLE

WIRING GP-CONSOLE

170-6909 WIRING GP-CONSOLE -LH
S/N D3C1-UP
PART OF 220-2152 WIRING GP-CONSOLE

i01354517 SEBP3587

For full view, you need register

Parts for your 330C MH EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	170-6959	[1]	HARNESS AS-OPERATOR CONTROLS (CONSOLE)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8805	[2]	KIT-RECEPTACLE (6-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	155-2274	[2]	KIT-CONNECTING PLUG (6-PIN)
			(INCLUDES PLUG AS, INTERFACE SEAL & WEDGE)
2.	7K-1181 B	[1]	STRAP-CABLE
3.	163-6795	[1]	STRAP-CABLE
4.	3S-2093 B	[2]	STRAP-CABLE
	B		USE AS REQUIRED

#SEBP35870236

220-2152: WIRING GP-CONSOLE

WIRING GP-CONSOLE

220-2152 WIRING GP-CONSOLE
S/N D3C1-UP
PART OF 213-4883 OPERATOR AR

i01790497 SEBP3587

For full view, you need register

Parts for your 330C MH EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
170-6909 Y	[1]	WIRING GP-CONSOLE (LH)
222-4426 Y	[1]	WIRING GP-CONSOLE (RH)
Y		SEPARATE ILLUSTRATION

#SEBP35870237

222-4426: WIRING GP-CONSOLE

WIRING GP-CONSOLE

222-4426 WIRING GP-CONSOLE -RH
S/N D3C1-UP
PART OF 220-2152 WIRING GP-CONSOLE

i01790506 SEBP3587

For full view, you need register

Parts for your 330C MH EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	163-6795	[1]	STRAP-CABLE
2.	6V-5738 BD		TRIM-EDGE
3.	163-6710	[1]	SWITCH AS-TOGGLE (ONE TOUCH LOW IDLE)
4.	163-6711	[1]	SWITCH AS-TOGGLE (AEC)
5.	222-4427	[1]	HARNESS AS
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH CONNECTING PLUG KIT INCLUDES PLUG AS, INTERFACE SEAL & WEDGE)
6.	9G-7641 Y	[1]	SWITCH GP-START (ENGINE, KEY)
7.	163-6702	[1]	PANEL AS
	170-9324	[1]	LAMP AS-INDICATOR (24-VOLT, 3-WATT)(3 WATT)
8.	185-9208	[1]	KNOB AS
9.	106-0107 Y	[1]	SWITCH GP-ROTARY (THROTTLE)
10.	170-6828	[1]	HARNESS AS-SWITCH (ENGINE START)
11.	119-5026	[4]	SCREW-PAN HEAD (10-16X0.63-IN)
12.	3S-2093	[3]	STRAP-CABLE
13.	7K-1181	[1]	STRAP-CABLE
14.	146-0238	[1]	SWITCH AS-TOGGLE (GRAPPLE OR MAGNET)
	3L-8187	[12]	LOCKWASHER
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	6V-8374	[12]	SCREW-MACHINE (6-32X0.25-IN)
15.	204-4559	[1]	PLATE AS
	204-4560	[1]	FILM (MATERIAL HANDLER)
	B		USE AS REQUIRED
	D		ORDER BY THE METER
	Y		SEPARATE ILLUSTRATION

#SEBP35870238

204-3604: WIRING GP-ELECTRONIC CONTROL

WIRING GP-ELECTRONIC CONTROL

204-3604 WIRING GP-ELECTRONIC CONTROL
S/N 4ZF4115-5892
PART OF 208-3027 ENGINE AR

i01844179 SEBP3587

2043604 WIRING GP-ELECTRONIC CONTROL Parts scheme

For full view, you need register

Parts for your 330C MH EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[15]	STRAP-CABLE
3.	188-9865	[1]	HARNESS AS-ENGINE (FUEL INJECTOR)
	3S-2093	[5]	STRAP-CABLE
	105-1797	[5]	MOUNT
	191-7823	[1]	RECEPTACLE AS
4.	201-1283	[1]	HARNESS AS-CONTROL (ENGINE ELECTRONIC, LOWER)
	214-7170 L	[1]	KIT-REPAIR (ELECTRICAL CONNECTORS)(FOR EXTREME COLD CLIMATES)
	102-8803	[2]	KIT-RECEPTACLE (3-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	3E-3371	[2]	WEDGE-RECEPTACLE LOCK (3-PIN)
	8T-8737	[8]	PLUG-SEAL
	155-2276	[3]	WEDGE-PLUG LOCK (3-PIN)
	155-2260	[3]	KIT-CONNECTING PLUG (3-PIN)
			(EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	194-5226	[8]	WIRE AS (16-GA)
	102-8802	[2]	KIT-RECEPTACLE (2-PIN)
	102-8803	[3]	KIT-RECEPTACLE (3-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	100-3320	[1]	PLUG AS-CONNECTOR (2-PIN)
	111-2416	[1]	PLUG AS-CONNECTOR (2-PIN)
5.	223-4453 CY	[1]	SWITCH GP-MAGNETIC (24-VOLT)(STARTING AID HEATER)
6.	117-7032 C	[1]	WIRE AS
7.	193-9141 C	[2]	COVER-TERMINAL
8.	3E-4353 C	[2]	WASHER-HARD (11X25X3-MM THK)
9.	4P-7428	[1]	CLIP (LADDER)
10.	4P-7429	[1]	CLIP (LADDER)
11.	4P-7581	[4]	CLIP (LADDER)
12.	4P-8134	[1]	CLIP (LADDER)
13.	6V-4369	[1]	CLIP
14.	6V-5215 M	[1]	BOLT (M8X1.25X16-MM)
15.	6V-6317 CM	[2]	BOLT (M10X1.5X20-MM)
16.	7I-2272 M	[2]	BOLT (M5X0.8X12-MM)
17.	8T-0328	[2]	WASHER-HARD (5.5X10X1-MM THK)
18.	8T-4205	[1]	WASHER-HARD (7.2X14.5X2-MM THK)
19.	8T-5451 M	[1]	BOLT (M6X1X12-MM)
20.	9M-1974	[1]	WASHER-HARD (8.8X16X2-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	L		KIT MARKED "L" PROVIDES OIL GRADE PLUGS FOR 0W20, 10W30, 15W40 OIL GRADES
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP35870239

204-3604: WIRING GP-ELECTRONIC CONTROL

WIRING GP-ELECTRONIC CONTROL

204-3604 WIRING GP-ELECTRONIC CONTROL
S/N 4ZF5893-7976
PART OF 208-3027 ENGINE AR

i01901033 SEBP3587

For full view, you need register

Parts for your 330C MH EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093 C	[24]	STRAP-CABLE
3.	188-9865	[1]	HARNESS AS-ENGINE (FUEL INJECTOR)
	105-1797	[5]	MOUNT
	3S-2093	[5]	STRAP-CABLE
	191-7823	[1]	RECEPTACLE AS
	209-0455	[6]	RECEPTACLE AS
4.	226-0903 C	[1]	CABLE AS
5.	230-6279 C	[1]	HARNESS AS-ENGINE (ENGINE ELCTRONIC-LOWER)
	102-8802	[2]	KIT-RECEPTACLE (2-PIN)
	102-8803	[4]	KIT-RECEPTACLE (3-PIN)
			(EACH RECEPTACLE KIT INCLUDES PLUG AS & WEDGE)
	3S-2093	[3]	STRAP-CABLE
	8T-8737	[35]	PLUG-SEAL
	100-3320	[1]	PLUG AS-CONNECTOR (2-PIN)
	111-2416	[1]	PLUG AS-CONNECTOR (2-PIN)
	160-7690	[1]	PLUG AS-CONNECTOR (70-PIN)
	172-6062	[1]	PLUG AS-CONNECTOR (18-PIN)
	155-2270	[4]	KIT-CONNECTING PLUG (2-PIN)
	155-2260	[6]	KIT-CONNECTING PLUG (3-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	214-7170 L	[1]	KIT-REPAIR (ELECTRICAL CONNECTORS)
			(FOR EXTREME COLD CLIMATES)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3E-3371	[2]	WEDGE-RECEPTACLE LOCK (3-PIN)
	8T-8737	[8]	PLUG-SEAL
	155-2276	[3]	WEDGE-PLUG LOCK (3-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	194-5226	[1]	WIRE AS (16-GA)
	194-5227	[1]	WIRE AS (14-GA)
6.	223-4453 Y	[1]	SWITCH GP-MAGNETIC (24-VOLT)(STARTING AID HEATER)
7.	3E-4353	[2]	WASHER-HARD (11X25X3-MM THK)
8.	4P-7581 C	[5]	CLIP (LADDER)
9.	4P-8134 C	[3]	CLIP (LADDER)
10.	5P-7970 CM	[1]	NUT (M8X1.25-THD)
11.	6V-4369	[1]	CLIP
12.	6V-5839 C	[3]	WASHER (11X21X2.5-MM THK)
13.	6V-6317 CM	[4]	BOLT (M10X1.5X20-MM)
14.	7I-2272 M	[2]	BOLT (M5X0.8X12-MM)
15.	8T-0328	[2]	WASHER-HARD (5.5X10X1-MM THK)
16.	8T-4137 CM	[1]	BOLT (M10X1.5X20-MM)
17.	8T-4205	[1]	WASHER-HARD (7.2X14.5X2-MM THK)
18.	8T-5451 M	[1]	BOLT (M6X1X12-MM)
19.	9M-1974	[1]	WASHER-HARD (8.8X16X2-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	L		KIT MARKED "L" PROVIDES OIL GRADE PLUGS FOR 0W20, 10W30, 15W40 OIL GRADES
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Engine News

270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}

Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}

Tool Operating Manual

Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Testing and Adjusting

Electric Starting System - Test
C-9 Engines for Caterpillar Built Machines

Troubleshooting

CID 0168 FMI 01 System Voltage Low
C-9 Engine for Caterpillar Built Machines

CID 0168 FMI 00 System Voltage High
C-9 Engine for Caterpillar Built Machines

CID 0263 FMI 03 Digital Sensor Supply short to +batt
C-9 Engine for Caterpillar Built Machines

CID 0263 FMI 04 Digital Sensor Supply short to ground
C-9 Engine for Caterpillar Built Machines

Electrical Connectors - Inspect
C-9 Engine for Caterpillar Built Machines

CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C-9 Engine for the 973C Track-Type Loader

CID 0100 FMI 04 Engine Oil Pressure short to ground
C-9 Engine for Caterpillar Built Machines

CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C-9 Engine for Caterpillar Built Machines

CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C-9 Engine for the 973C Track-Type Loader

CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C-9 Engine for the 973C Track-Type Loader

CID 0273 FMI 03 Turbo Outlet Pressure open/short to +batt
C-9 Engine for Caterpillar Built Machines

CID 0273 FMI 04 Turbo Outlet Pressure short to ground
C-9 Engine for Caterpillar Built Machines

CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C-9 Engine for Caterpillar Built Machines

CID 0274 FMI 04 Atmospheric Pressure short to ground
C-9 Engine for Caterpillar Built Machines

CID 0041 FMI 04 8 Volt DC Supply short to ground
C-9 Engine for Caterpillar Built Machines

CID 0248 FMI 09 Cat Data Link not communicating
C-9 Engine for Caterpillar Built Machines

CID 0042 FMI 11 Inject Actuation Control Valve open/short
C-9 Engine for Caterpillar Built Machines

CID 0094 FMI 03 Fuel Pressure open/short to +batt
C-9 Engine for Caterpillar Built Machines

CID 0094 FMI 04 Fuel Pressure short to ground
C-9 Engine for Caterpillar Built Machines

CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
C-9 Engine for Caterpillar Built Machines

CID 0110 FMI 04 Engine Coolant Temperature short to ground
C-9 Engine for Caterpillar Built Machines

CID 0164 FMI 00 High Injector Actuation Pressure
C-9 Engine for Caterpillar Built Machines

CID 0164 FMI 03 Injector Actuation Pressure voltage high
C-9 Engine for the 973C Track-Type Loader

CID 0175 FMI 03 Engine Oil Temperature open/short to +batt
C-9 Engine for the 973C Track-Type Loader

CID 0175 FMI 04 Engine Oil Temperature short to ground
C-9 Engine for the 973C Track-Type Loader

CID 0267 FMI 02 Incorrect Engine Shutdown Switch inputs
C-9 Engine for Caterpillar Built Machines

CID 0041 FMI 03 8 Volt DC Supply short to +batt
C-9 Engine for Caterpillar Built Machines

How To Use the Functional Tests
C-9 Engine for Caterpillar Built Machines

Air Inlet Heater Circuit - Test
C-9 Engine for Caterpillar Built Machines

CID 0164 FMI 11 Injector Actuation Pressure system fault
C-9 Engine for Caterpillar Built Machines

CID 0190 FMI 02 Loss of Engine Speed Signal
C-9 Engine for the 973C Track-Type Loader

CID 0190 FMI 11 Engine Speed Sensor mechanical failure
C-9 Engine for Caterpillar Built Machines

CID 0617 FMI 05 Air Inlet Heater Relay open/current below normal
C-9 Engine for the 973C Track-Type Loader

Cat Data Link Circuit - Test
C-9 Engine for Caterpillar Built Machines

Electrical Power Supply Circuit - Test
C-9 Engine for Caterpillar Built Machines

Engine Pressure Sensor Open or Short Circuit - Test
C-9 Engine for Caterpillar Built Machines

Engine Shutdown Switch Circuit - Test
C-9 Engine for Caterpillar Built Machines

CID 0275 FMI 03 Right Turbo Inlet Pressure open/short to +batt
C-9 Engine for Caterpillar Built Machines

CID 0275 FMI 04 Right Turbo Inlet Pressure short to ground
C-9 Engine for Caterpillar Built Machines

CID 0164 FMI 02 Injector Actuation Pressure signal erratic
C-9 Engine for the 973C Track-Type Loader

CID 0342 FMI 02 Loss of Secondary Engine Speed signal
C-9 Engine for Caterpillar Built Machines

CID 0091 FMI 02 Incorrect Throttle Switch inputs
C-9 Engine for the 973C Track-Type Loader

CID 0175 FMI 03 Engine Oil Temperature open/short to +batt
C-9 Engine for Caterpillar Built Machines

CID 0175 FMI 04 Engine Oil Temperature short to ground
C-9 Engine for Caterpillar Built Machines

CID 0320 FMI 02 Speed/Timing Sensor Loss of Signal
C-9 Engine for Caterpillar Built Machines

Injection Actuation Pressure Control Valve Circuit - Test
C-9 Engine for Caterpillar Built Machines

CID 0164 FMI 04 Injector Actuation Pressure voltage low
C-9 Engine for the 973C Track-Type Loader

CID 0342 FMI 11 Secondary Engine Speed Sensor mechanical failure
C-9 Engine for the 973C Track-Type Loader

CID 1715 FMI 03 Engine Oil Temperature Sensor #2 short to +batt
C-9 Engine for Caterpillar Built Machines

CID 1715 FMI 04 Engine Oil Temperature Sensor #2 short to ground
C-9 Engine for Caterpillar Built Machines

Engine Pressure Sensor Open or Short Circuit - Test
C-9 Engine for the 973C Track-Type Loader

Sensors and Electrical Connectors
C-9 Engine for Caterpillar Built Machines

5 Volt Engine Pressure Sensor Supply Circuit - Test
C-9 Engine for Caterpillar Built Machines

Analog Sensor Supply Circuit - Test
C-9 Engine for Caterpillar Built Machines

Digital Sensor Supply Circuit - Test
C-9 Engine for Caterpillar Built Machines

Engine Speed/Timing Sensor Circuit - Test
C-9 Engine for Caterpillar Built Machines

Throttle Position Sensor Circuit - Test
C-9 Engine for Caterpillar Built Machines

Throttle Switch Circuit - Test
C-9 Engine for the 973C Track-Type Loader

CID 0444 FMI 03 Start Relay short to +batt
C-9 Engine for the 973C Track-Type Loader

CID 0444 FMI 05 Start Relay open circuit
C-9 Engine for the 973C Track-Type Loader

CID 0444 FMI 06 Start Relay short to ground
C-9 Engine for the 973C Track-Type Loader

Start Relay Circuit - Test
C-9 Engine for the 973C Track-Type Loader

Sensors and Electrical Connectors
C-9 Engine for the 973C Track-Type Loader

CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C-9 Engine for the 973C Track-Type Loader

CID 0274 FMI 04 Atmospheric Pressure short to ground
C-9 Engine for the 973C Track-Type Loader

Engine Wiring Information
C-9 Engine for Caterpillar Built Machines

User Defined Shutdown Input Circuit - Test
C-9 Engine for Caterpillar Built Machines

CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C-9 Engine for Caterpillar Built Machines

CID 0617 FMI 06 Air Inlet Heater Relay grounded/current above norm
C-9 Engine for Caterpillar Built Machines

Service Magazine

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04

A New Engine Oil Grade Plug 0W20 Is Now Available {1408}
2002/04/22

Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13

Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/12

Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08

Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08

Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Caterpillar Parts SIS Catalog 330C MH :

190-1020 WIRING GP-CAB

239-1134 VALVE GP-ETHER STARTING

9G-7641 SWITCH GP-START

106-0107 SWITCH GP-ROTARY

398-0940 SWITCH GP-MAGNETIC

223-4453 SWITCH GP-MAGNETIC

209-5582 SWITCH GP-MAGNETIC

190-1020 WIRING GP-CAB

222-7905 WIRING GP-CAB RISER

275-7219 WIRING GP-COLD WEATHER

170-6909 WIRING GP-CONSOLE

220-2152 WIRING GP-CONSOLE

222-4426 WIRING GP-CONSOLE

204-3604 WIRING GP-ELECTRONIC CONTROL

Truck sale:

CATERPILLAR 330CMH 2005
- TRACK EXCAVATORS
COMPAGNIA GENERALE TRATTORI
- Carugate - Italy

USD $84,916

2005 CAT 330C MH

CGT SPA
Roma, Italy