204-3604 WIRING GP-ELECTRONIC CONTROL S/N 4ZF7977-UP PART OF 208-3027 ENGINE AR Type 1 330C MH EXCAVATOR

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 204-3604 WIRING GP-
1. 204-3604 WIRING GP-
2. 204-3604 WIRING GP-
3. 204-3604 WIRING GP-
4. 224-5907 WIRING GP-
5. 224-5902 WIRING GP-
6. 224-5906 WIRING GP-

POWER TRAIN

DRIVE GP-FINAL

7. 199-4578 DRIVE GP-F
8. 199-4579 DRIVE GP-F
9. 199-4640 DRIVE GP-F
0. INFORMATION

EXCAVATOR 330C MH EXCAVATOR D3C
330C Hydraulic Material Handler D3C00001-UP (MACHINE) POWERED BY C-9 Engine SEBP3587 330C MH D3C (2001)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

204-3604 WIRING GP-ELECTRONIC CONTROL

#SEBP35870240

204-3604: WIRING GP-ELECTRONIC CONTROL

WIRING GP-ELECTRONIC CONTROL

204-3604 WIRING GP-ELECTRONIC CONTROL
S/N 4ZF7977-UP
PART OF 208-3027 ENGINE AR
Type 1

i02085032 SEBP3587

2043604 WIRING GP-ELECTRONIC CONTROL Parts scheme

For full view, you need register

Parts for your 330C MH EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	3S-2093	[24]	STRAP-CABLE
3.	215-3249 C	[1]	HARNESS AS-ENGINE (UNIT INJECTOR)
	3S-2093	[5]	STRAP-CABLE
	191-7823	[1]	RECEPTACLE AS
4.	226-0903	[1]	CABLE AS
5.	230-6279	[1]	HARNESS AS-ENGINE (ENGINE ELECTRONIC-LOWER)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
	6I-4347	[4]	BOOT (4-PIN)
	100-3320	[1]	PLUG AS-CONNECTOR (2-PIN)
	111-2416	[1]	PLUG AS-CONNECTOR (2-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS & WEDGE)
	160-7690	[1]	PLUG AS-CONNECTOR (70-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(INCLUDES PLUG AS & WEDGE)
	214-7170 L	[1]	KIT-REPAIR (ELECTRICAL CONNECTORS)
			(FOR EXTREME COLD CLIMATES)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3E-3371	[2]	WEDGE-RECEPTACLE LOCK (3-PIN)
	8T-8737	[8]	PLUG-SEAL
	155-2276	[3]	WEDGE-PLUG LOCK (3-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(INCLUDES PLUG AS & WEDGE)
	194-5226	[1]	WIRE AS (16-GA)
	194-5227	[1]	WIRE AS (14-GA)
6.	223-4453 Y	[1]	SWITCH GP-MAGNETIC (24-VOLT)(STARTING AID HEATER)
7.	3E-4353	[2]	WASHER-HARD (11X25X3-MM THK)
8.	4P-7581	[5]	CLIP (LADDER)
9.	4P-8134	[3]	CLIP (LADDER)
10.	5P-7970 M	[1]	NUT (M8X1.25-THD)
11.	6V-4369	[1]	CLIP
12.	6V-5839	[3]	WASHER (11X21X2.5-MM THK)
13.	6V-6317 M	[4]	BOLT (M10X1.5X20-MM)
14.	7I-2272 M	[2]	BOLT (M5X0.8X12-MM)
15.	8T-0328	[2]	WASHER-HARD (5.5X10X1-MM THK)
16.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
17.	8T-4205	[1]	WASHER-HARD (7.2X14.5X2-MM THK)
18.	8T-5451 M	[1]	BOLT (M6X1X12-MM)
19.	9M-1974	[1]	WASHER-HARD (8.8X16X2-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	L		KIT MARKED "L" PROVIDES OIL GRADE PLUGS FOR 0W20, 10W30, 15W40 OIL GRADES
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP35870241

204-3604: WIRING GP-ELECTRONIC CONTROL

WIRING GP-ELECTRONIC CONTROL

204-3604 WIRING GP-ELECTRONIC CONTROL
S/N 4ZF7977-UP
PART OF 208-3027 ENGINE AR
Type 2

i02556386 SEBP3587

For full view, you need register

Parts for your 330C MH EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	3S-2093	[24]	STRAP-CABLE
3.	215-3249	[1]	HARNESS AS-ENGINE (UNIT INJECTOR)
	3S-2093	[5]	STRAP-CABLE
	191-7823	[1]	RECEPTACLE AS
4.	226-0903	[1]	CABLE AS
5.	230-6279	[1]	HARNESS AS-ENGINE (ENGINE ELECTRONIC-LOWER)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	6I-4347	[4]	BOOT (4-PIN)
	100-3320	[1]	PLUG AS-CONNECTOR (2-PIN)
	111-2416	[1]	PLUG AS-CONNECTOR (2-PIN)
	160-7690	[1]	PLUG AS-CONNECTOR (70-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	214-7170 L	[1]	KIT-REPAIR (ELECTRICAL CONNECTORS)
			(FOR EXTREME COLD CLIMATES)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3E-3371	[2]	WEDGE-RECEPTACLE LOCK (3-PIN)
	8T-8737	[8]	PLUG-SEAL
	155-2276	[3]	WEDGE-PLUG LOCK (3-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	194-5226	[1]	WIRE AS (16-GA)
	194-5227	[1]	WIRE AS (14-GA)
6.	223-4453 CY	[1]	SWITCH GP-MAGNETIC (24-VOLT)(STARTING AID HEATER)
8.	4P-7581	[5]	CLIP (LADDER)
9.	4P-8134	[3]	CLIP (LADDER)
10.	5P-7970 M	[1]	NUT (M8X1.25-THD)
11.	6V-4369	[1]	CLIP
12.	6V-5839 C	[6]	WASHER (11X21X2.5-MM THK)
13.	6V-6317 CM	[2]	BOLT (M10X1.5X20-MM)
14.	7I-2272 M	[2]	BOLT (M5X0.8X12-MM)
15.	8T-0328	[2]	WASHER-HARD (5.5X10X1-MM THK)
16.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
17.	8T-4205	[1]	WASHER-HARD (7.2X14.5X2-MM THK)
18.	8T-5451 M	[1]	BOLT (M6X1X12-MM)
19.	9M-1974	[1]	WASHER-HARD (8.8X16X2-MM THK)
20.	8T-4133 CM	[2]	NUT (M10X1.5-THD)
21.	101-3129 CM	[2]	STUD (M10X1.5-THD)
	C		CHANGE FROM PREVIOUS TYPE
	L		KIT MARKED "L" PROVIDES OIL GRADE PLUGS FOR 0W20, 10W30, 15W40 OIL GRADES
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP35870242

204-3604: WIRING GP-ELECTRONIC CONTROL

WIRING GP-ELECTRONIC CONTROL

204-3604 WIRING GP-ELECTRONIC CONTROL
S/N 4ZF7977-UP; 7AZ1-UP
PART OF 208-3027 ENGINE AR
Type 1

i02556396 SEBP3587

For full view, you need register

Parts for your 330C MH EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	3S-2093	[25]	STRAP-CABLE
3.	215-3249 Y	[1]	HARNESS AS-ENGINE (UNIT INJECTOR)
4.	226-0903	[1]	CABLE AS
5.	230-6279 Y	[1]	HARNESS AS-ENGINE (ECM)
6.	209-5582 CY	[1]	SWITCH GP-MAGNETIC (24-VOLT)(STARTING AID HEATER)
7.	208-9277 CM	[2]	BOLT-FLANGE HEAD (M6X1X20-MM)
8.	4P-7581	[5]	CLIP (LADDER)
9.	4P-8134	[3]	CLIP (LADDER)
10.	5P-7970 M	[1]	NUT (M8X1.25-THD)
11.	6V-4369	[1]	CLIP
12.	6V-5839 C	[4]	WASHER (11X21X2.5-MM THK)
13.	6V-6317 CM	[3]	BOLT (M10X1.5X20-MM)
14.	7I-2272 M	[2]	BOLT (M5X0.8X12-MM)
15.	8T-0328	[2]	WASHER-HARD (5.5X10X1-MM THK)
16.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
17.	8T-4205	[1]	WASHER-HARD (7.2X14.5X2-MM THK)
18.	8T-5451 M	[1]	BOLT (M6X1X12-MM)
19.	9M-1974	[1]	WASHER-HARD (8.8X16X2-MM THK)
20.	283-1226 C	[1]	BRACKET AS
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP35870243

204-3604: WIRING GP-ELECTRONIC CONTROL

WIRING GP-ELECTRONIC CONTROL

204-3604 WIRING GP-ELECTRONIC CONTROL
S/N 4ZF7977-UP; 7AZ1-UP
PART OF 208-3027 ENGINE AR
Type 2

i05375373 SEBP3587

For full view, you need register

Parts for your 330C MH EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	3S-2093	[25]	STRAP-CABLE
3.	546-2154 CY	[1]	HARNESS AS-CONTROL
4.	226-0903	[1]	CABLE AS
5.	230-6279 Y	[1]	HARNESS AS-ENGINE (ECM)
6.	398-0940 CY	[1]	SWITCH GP-MAGNETIC (24-VOLT)(STARTING AID HEATER)
7.	208-9277 M	[2]	BOLT-FLANGE HEAD (M6X1X20-MM)
8.	4P-7581	[5]	CLIP (LADDER)
9.	4P-8134	[3]	CLIP (LADDER)
10.	5P-7970 M	[1]	NUT (M8X1.25-THD)
11.	6V-4369	[1]	CLIP
12.	6V-5839	[4]	WASHER (11X21X2.5-MM THK)
13.	6V-6317 M	[3]	BOLT (M10X1.5X20-MM)
14.	7I-2272 M	[2]	BOLT (M5X0.8X12-MM)
15.	8T-0328	[2]	WASHER-HARD (5.5X10X1-MM THK)
16.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
17.	8T-4205	[1]	WASHER-HARD (7.2X14.5X2-MM THK)
18.	8T-5451 M	[1]	BOLT (M6X1X12-MM)
19.	9M-1974	[1]	WASHER-HARD (8.8X16X2-MM THK)
20.	283-1226	[1]	BRACKET AS
21.	439-4571 C	[5]	CLIP
22.	440-0881 CM	[5]	BOLT-SOCKET HEAD (M8X1.25-THD)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP35870244

224-5907: WIRING GP-GRAPPLE CONTROL

WIRING GP-GRAPPLE CONTROL

224-5907 WIRING GP-GRAPPLE CONTROL
S/N D3C1-UP
PART OF 213-5123 CHASSIS AR

i01804676 SEBP3587

2245907 WIRING GP-GRAPPLE CONTROL Parts scheme

For full view, you need register

Parts for your 330C MH EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	3S-2093	[36]	STRAP-CABLE
2.	224-5905	[1]	HARNESS AS
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS & WEDGE)
3.	183-0998	[1]	HARNESS AS-SOLENOID (FLOW LIMIT)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS & WEDGE)
4.	222-4432 Y	[1]	PANEL GP-CIRCUIT BREAKER
5.	7Y-8167	[1]	GROMMET (50-MM ID)
	Y		SEPARATE ILLUSTRATION

#SEBP35870245

224-5902: WIRING GP-HYDRAULIC GENERATOR

WIRING GP-HYDRAULIC GENERATOR

224-5902 WIRING GP-HYDRAULIC GENERATOR
S/N D3C1-UP
PART OF 213-5131, 243-0662 GENERATOR AR-HYDRAULIC
AN ATTACHMENT

i01809340 SEBP3587

2245902 WIRING GP-HYDRAULIC GENERATOR Parts scheme

For full view, you need register

Parts for your 330C MH EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	224-5901	[1]	WIRE AS
2.	145-8937	[1]	WIRE AS
3.	096-0061	[11]	STRAP-CABLE

#SEBP35870246

224-5906: WIRING GP-HYDRAULIC GENERATOR

WIRING GP-HYDRAULIC GENERATOR

224-5906 WIRING GP-HYDRAULIC GENERATOR -MAGNET
S/N D3C1-UP
PART OF 213-5131, 243-0662 GENERATOR AR-HYDRAULIC
AN ATTACHMENT

i02051035 SEBP3587

For full view, you need register

Parts for your 330C MH EXCAVATOR:

Pos.	Part No	Qty	Parts name	Comments
	194-0463	[1]	CABLE AS

#SEBP35870247

199-4578: DRIVE GP-FINAL

DRIVE GP-FINAL

199-4578 DRIVE GP-FINAL
S/N D3C1-223
WITH MOTOR
PART OF 191-2576 POWER TRAIN AR

i01643465 SEBP3587

For full view, you need register

Parts for your 330C MH EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	199-4579 Y	[1]	DRIVE GP-FINAL
2.	191-5606 Y	[1]	MOTOR & MTG GP-TRAVEL
	Y		SEPARATE ILLUSTRATION

#SEBP35870248

199-4579: DRIVE GP-FINAL

DRIVE GP-FINAL

199-4579 DRIVE GP-FINAL
S/N D3C1-UP
WITHOUT MOTOR
PART OF 199-4578, 199-4640 DRIVE GP-FINAL
FIELD REPLACEMENT ORDER @@@@@199-4640@@@@@

i01643473 SEBP3587

For full view, you need register

Parts for your 330C MH EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	3E-2338	[2]	PLUG-PIPE
2.	7Y-0639	[1]	GEAR-SUN (21-TEETH)
3.	7Y-0642	[1]	GEAR-RING (63-TEETH)
4.	7Y-0645	[1]	CARRIER
5.	7Y-0659	[3]	GEAR-PLANETARY (22-TEETH)
6.	7Y-0661	[3]	SHAFT-PLANETARY
7.	7Y-0662	[4]	SHAFT-PLANETARY
8.	7Y-0663	[4]	GEAR-PLANETARY (20-TEETH)
9.	7Y-0667	[1]	RING-RETAINING
10.	7Y-0673	[1]	GEAR-RING (73-TEETH)
11.	7Y-0676	[3]	GEAR-PLANETARY (24-TEETH)
12.	7Y-0731	[1]	CARRIER AS
12A.	7Y-0656	[3]	SHAFT-PLANETARY
13.	7Y-1094 M	[14]	WASHER (66X102X1-MM THK)
14.	7Y-5235 M	[20]	BOLT (M24X3X190-MM)
15.	094-0577 B	[1]	PLATE (7-MM THK)
16.	094-0578 B	[1]	PLATE (8-MM THK)
17.	094-0579 B	[1]	PLATE (9-MM THK)
18.	094-0580 B	[1]	PLATE (10-MM THK)
19.	110-7231	[1]	GEAR-SUN (18-TEETH)
20.	191-2521	[1]	GEAR-SUN (23-TEETH)
21.	191-2522	[1]	RETAINER
22.	191-2523	[1]	CARRIER-PLANETARY
23.	191-2526	[1]	COVER
24.	191-2645	[1]	COUPLING
25.	196-4873	[2]	BEARING AS-BALL
26.	199-4580	[1]	HOUSING
27.	199-4581	[1]	HOUSING
28.	199-4582	[3]	BEARING AS
29.	199-4583	[11]	BEARING AS
30.	213-4737	[1]	SEAL GP-DUO-CONE
31.	093-1731	[1]	RING-RETAINING
32.	094-0584	[6]	WASHER (40.3X72X1-MM THK)
33.	095-0891	[7]	PIN-SPRING
34.	096-3216 M	[2]	SETSCREW-SOCKET (M12X1.75X12-MM)
35.	2P-3628	[1]	SEAL-O-RING
36.	7M-8485	[2]	SEAL-O-RING
37.	7Y-0595	[2]	SPACER (58X79.6X6-MM THK)
38.	7Y-0644	[1]	SPACER (163X190X8-MM THK)
39.	8T-4167	[20]	WASHER-HARD (26X44X4-MM THK)
40.	8T-4240	[3]	RING-RETAINING
41.	9X-6032 M	[12]	BOLT-SOCKET HEAD (M10X1.5X30-MM)
42.	1U-8846 B		SEALANT-GASKET
	B		USE AS REQUIRED
	M		METRIC PART

#SEBP35870249

199-4640: DRIVE GP-FINAL

DRIVE GP-FINAL

199-4640 DRIVE GP-FINAL
S/N D3C1-UP
FIELD REPLACEMENT FOR @@@@@199-4579@@@@@

i01720532 SEBP3587

For full view, you need register

Parts for your 330C MH EXCAVATOR:

Pos.	Part No	Qty	Parts name	Comments
	199-4579 Y	[1]	DRIVE GP-FINAL
	Y		SEPARATE ILLUSTRATION

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Engine News

270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}

Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}

Tool Operating Manual

Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Testing and Adjusting

Electric Starting System - Test
C-9 Engines for Caterpillar Built Machines

Troubleshooting

CID 0168 FMI 01 System Voltage Low
C-9 Engine for Caterpillar Built Machines

CID 0168 FMI 00 System Voltage High
C-9 Engine for Caterpillar Built Machines

CID 0263 FMI 03 Digital Sensor Supply short to +batt
C-9 Engine for Caterpillar Built Machines

CID 0263 FMI 04 Digital Sensor Supply short to ground
C-9 Engine for Caterpillar Built Machines

Electrical Connectors - Inspect
C-9 Engine for Caterpillar Built Machines

CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C-9 Engine for the 973C Track-Type Loader

CID 0100 FMI 04 Engine Oil Pressure short to ground
C-9 Engine for Caterpillar Built Machines

CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C-9 Engine for Caterpillar Built Machines

CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C-9 Engine for the 973C Track-Type Loader

CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C-9 Engine for the 973C Track-Type Loader

CID 0273 FMI 03 Turbo Outlet Pressure open/short to +batt
C-9 Engine for Caterpillar Built Machines

CID 0273 FMI 04 Turbo Outlet Pressure short to ground
C-9 Engine for Caterpillar Built Machines

CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C-9 Engine for Caterpillar Built Machines

CID 0274 FMI 04 Atmospheric Pressure short to ground
C-9 Engine for Caterpillar Built Machines

CID 0041 FMI 04 8 Volt DC Supply short to ground
C-9 Engine for Caterpillar Built Machines

CID 0248 FMI 09 Cat Data Link not communicating
C-9 Engine for Caterpillar Built Machines

CID 0042 FMI 11 Inject Actuation Control Valve open/short
C-9 Engine for Caterpillar Built Machines

CID 0094 FMI 03 Fuel Pressure open/short to +batt
C-9 Engine for Caterpillar Built Machines

CID 0094 FMI 04 Fuel Pressure short to ground
C-9 Engine for Caterpillar Built Machines

CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
C-9 Engine for Caterpillar Built Machines

CID 0110 FMI 04 Engine Coolant Temperature short to ground
C-9 Engine for Caterpillar Built Machines

CID 0164 FMI 00 High Injector Actuation Pressure
C-9 Engine for Caterpillar Built Machines

CID 0164 FMI 03 Injector Actuation Pressure voltage high
C-9 Engine for the 973C Track-Type Loader

CID 0175 FMI 03 Engine Oil Temperature open/short to +batt
C-9 Engine for the 973C Track-Type Loader

CID 0175 FMI 04 Engine Oil Temperature short to ground
C-9 Engine for the 973C Track-Type Loader

CID 0267 FMI 02 Incorrect Engine Shutdown Switch inputs
C-9 Engine for Caterpillar Built Machines

CID 0041 FMI 03 8 Volt DC Supply short to +batt
C-9 Engine for Caterpillar Built Machines

How To Use the Functional Tests
C-9 Engine for Caterpillar Built Machines

Air Inlet Heater Circuit - Test
C-9 Engine for Caterpillar Built Machines

CID 0164 FMI 11 Injector Actuation Pressure system fault
C-9 Engine for Caterpillar Built Machines

CID 0190 FMI 02 Loss of Engine Speed Signal
C-9 Engine for the 973C Track-Type Loader

CID 0190 FMI 11 Engine Speed Sensor mechanical failure
C-9 Engine for Caterpillar Built Machines

CID 0617 FMI 05 Air Inlet Heater Relay open/current below normal
C-9 Engine for the 973C Track-Type Loader

Cat Data Link Circuit - Test
C-9 Engine for Caterpillar Built Machines

Electrical Power Supply Circuit - Test
C-9 Engine for Caterpillar Built Machines

Engine Pressure Sensor Open or Short Circuit - Test
C-9 Engine for Caterpillar Built Machines

Engine Shutdown Switch Circuit - Test
C-9 Engine for Caterpillar Built Machines

CID 0275 FMI 03 Right Turbo Inlet Pressure open/short to +batt
C-9 Engine for Caterpillar Built Machines

CID 0275 FMI 04 Right Turbo Inlet Pressure short to ground
C-9 Engine for Caterpillar Built Machines

CID 0164 FMI 02 Injector Actuation Pressure signal erratic
C-9 Engine for the 973C Track-Type Loader

CID 0342 FMI 02 Loss of Secondary Engine Speed signal
C-9 Engine for Caterpillar Built Machines

CID 0091 FMI 02 Incorrect Throttle Switch inputs
C-9 Engine for the 973C Track-Type Loader

CID 0175 FMI 03 Engine Oil Temperature open/short to +batt
C-9 Engine for Caterpillar Built Machines

CID 0175 FMI 04 Engine Oil Temperature short to ground
C-9 Engine for Caterpillar Built Machines

CID 0320 FMI 02 Speed/Timing Sensor Loss of Signal
C-9 Engine for Caterpillar Built Machines

Injection Actuation Pressure Control Valve Circuit - Test
C-9 Engine for Caterpillar Built Machines

CID 0164 FMI 04 Injector Actuation Pressure voltage low
C-9 Engine for the 973C Track-Type Loader

CID 0342 FMI 11 Secondary Engine Speed Sensor mechanical failure
C-9 Engine for the 973C Track-Type Loader

CID 1715 FMI 03 Engine Oil Temperature Sensor #2 short to +batt
C-9 Engine for Caterpillar Built Machines

CID 1715 FMI 04 Engine Oil Temperature Sensor #2 short to ground
C-9 Engine for Caterpillar Built Machines

Engine Pressure Sensor Open or Short Circuit - Test
C-9 Engine for the 973C Track-Type Loader

Sensors and Electrical Connectors
C-9 Engine for Caterpillar Built Machines

5 Volt Engine Pressure Sensor Supply Circuit - Test
C-9 Engine for Caterpillar Built Machines

Analog Sensor Supply Circuit - Test
C-9 Engine for Caterpillar Built Machines

Digital Sensor Supply Circuit - Test
C-9 Engine for Caterpillar Built Machines

Engine Speed/Timing Sensor Circuit - Test
C-9 Engine for Caterpillar Built Machines

Throttle Position Sensor Circuit - Test
C-9 Engine for Caterpillar Built Machines

Throttle Switch Circuit - Test
C-9 Engine for the 973C Track-Type Loader

CID 0444 FMI 03 Start Relay short to +batt
C-9 Engine for the 973C Track-Type Loader

CID 0444 FMI 05 Start Relay open circuit
C-9 Engine for the 973C Track-Type Loader

CID 0444 FMI 06 Start Relay short to ground
C-9 Engine for the 973C Track-Type Loader

Start Relay Circuit - Test
C-9 Engine for the 973C Track-Type Loader

Sensors and Electrical Connectors
C-9 Engine for the 973C Track-Type Loader

CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C-9 Engine for the 973C Track-Type Loader

CID 0274 FMI 04 Atmospheric Pressure short to ground
C-9 Engine for the 973C Track-Type Loader

Engine Wiring Information
C-9 Engine for Caterpillar Built Machines

User Defined Shutdown Input Circuit - Test
C-9 Engine for Caterpillar Built Machines

CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C-9 Engine for Caterpillar Built Machines

CID 0617 FMI 06 Air Inlet Heater Relay grounded/current above norm
C-9 Engine for Caterpillar Built Machines

Service Magazine

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04

A New Engine Oil Grade Plug 0W20 Is Now Available {1408}
2002/04/22

Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13

Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/12

Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08

Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08

Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Caterpillar Parts SIS Catalog 330C MH :

204-3604 WIRING GP-ELECTRONIC CONTROL

222-4426 WIRING GP-CONSOLE

220-2152 WIRING GP-CONSOLE

170-6909 WIRING GP-CONSOLE

275-7219 WIRING GP-COLD WEATHER

222-7905 WIRING GP-CAB RISER

190-1020 WIRING GP-CAB

204-3604 WIRING GP-ELECTRONIC CONTROL

224-5907 WIRING GP-GRAPPLE CONTROL

224-5902 WIRING GP-HYDRAULIC GENERATOR

224-5906 WIRING GP-HYDRAULIC GENERATOR

199-4578 DRIVE GP-FINAL

199-4579 DRIVE GP-FINAL

Truck sale:

CATERPILLAR 330CMH 2005
- TRACK EXCAVATORS
COMPAGNIA GENERALE TRATTORI
- Carugate - Italy

USD $84,916

2005 CAT 330C MH

CGT SPA
Roma, Italy

204-3604 WIRING GP-ELECTRONIC CONTROL S/N 4ZF7977-UP PART OF 208-3027 ENGINE AR Type 1 330C MH EXCAVATOR

ELECTRICAL AND STARTING SYSTEM

204-3604: WIRING GP-ELECTRONIC CONTROL

Parts for your 330C MH EXCAVATOR:

204-3604: WIRING GP-ELECTRONIC CONTROL

Parts for your 330C MH EXCAVATOR:

204-3604: WIRING GP-ELECTRONIC CONTROL

Parts for your 330C MH EXCAVATOR:

204-3604: WIRING GP-ELECTRONIC CONTROL

Parts for your 330C MH EXCAVATOR:

224-5907: WIRING GP-GRAPPLE CONTROL

Parts for your 330C MH EXCAVATOR:

224-5902: WIRING GP-HYDRAULIC GENERATOR

Parts for your 330C MH EXCAVATOR:

224-5906: WIRING GP-HYDRAULIC GENERATOR

Parts for your 330C MH EXCAVATOR:

199-4578: DRIVE GP-FINAL

Parts for your 330C MH EXCAVATOR:

199-4579: DRIVE GP-FINAL

Parts for your 330C MH EXCAVATOR:

199-4640: DRIVE GP-FINAL

Parts for your 330C MH EXCAVATOR:

Information:

Caterpillar Parts SIS Catalog 330C MH :

Truck sale:

Modal