BASIC ENGINE
CYLINDER BLOCK GPCYLINDER HEAD GP
BASIC ENGINE
CYLINDER BLOCK GP#SEBP35890020
204-9538: CYLINDER BLOCK AS
Parts for your 330C FM EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 0L-1026 | [2] | PLUG-CUP | |
2. | 216-5586 | [1] | BUSHING (CAMSHAFT) | |
3. | 3B-0623 | [2] | PLUG-CUP | |
4. | 4F-5695 | [4] | PLUG-CUP | |
5. | 212-7002 | [7] | CAP-BEARING | |
6. | 203-5805 | [2] | BUSHING | |
7. | 203-6090 | [1] | BUSHING | |
8. | 175-0454 M | [14] | BOLT (M16X2X160-MM) | |
9. | 9X-8268 | [14] | WASHER (17.5X30X3.5-MM THK) | |
M | METRIC PART |
#SEBP35890021
325-3915: CYLINDER BLOCK AS
325-3915 CYLINDER BLOCK AS
S/N 4ZF4479-UP; 7AZ1-UP
PART OF 517-1908 CYLINDER BLOCK AS
S/N 4ZF4479-UP; 7AZ1-UP
PART OF 517-1908 CYLINDER BLOCK AS
Parts for your 330C FM EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 0L-1026 | [2] | PLUG-CUP | |
2. | 3B-0623 | [2] | PLUG-CUP | |
3. | 4F-5695 | [4] | PLUG-CUP | |
4. | 175-0454 M | [14] | BOLT (M16X2X160-MM) | |
5. | 203-5805 | [2] | BUSHING | |
6. | 203-6090 | [1] | BUSHING | |
7. | 212-7002 | [7] | CAP-BEARING | |
8. | 216-5586 | [1] | BUSHING (CAMSHAFT) | |
9. | 9X-8268 | [14] | WASHER (17.5X30X3.5-MM THK) | |
M | METRIC PART |
#SEBP35890022
517-1908: CYLINDER BLOCK AS
517-1908 CYLINDER BLOCK AS
S/N 4ZF4479-UP; 7AZ1-UP
PART OF 161-3406 CYLINDER BLOCK GP
S/N 4ZF4479-UP; 7AZ1-UP
PART OF 161-3406 CYLINDER BLOCK GP
Parts for your 330C FM EXCAVATOR:
CATERPILLAR SIS#SEBP35890023
161-3406: CYLINDER BLOCK GP
#SEBP35890024
161-3406: CYLINDER BLOCK GP
161-3406 CYLINDER BLOCK GP
S/N 4ZF4479-UP; 7AZ1-UP
PART OF 187-0471, 388-5610 ENGINE AR-CORE
S/N 4ZF4479-UP; 7AZ1-UP
PART OF 187-0471, 388-5610 ENGINE AR-CORE
Parts for your 330C FM EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 0S-0519 | [1] | PLUG-CUP | |
2. | 517-1908 CY | [1] | CYLINDER BLOCK AS | |
3. | 1W-8407 | [2] | SLEEVE | |
4. | 396-0393 | [1] | PLUG AS | |
214-7566 | [1] | SEAL-O-RING | ||
360-3677 | [1] | PLUG (7/16-20-THD) | ||
5. | 4G-4972 | [1] | SEAL-O-RING | |
6. | 6V-3538 | [2] | DOWEL | |
7. | 7N-5683 | [2] | DOWEL | |
C | CHANGE FROM PREVIOUS TYPE | |||
Y | SEPARATE ILLUSTRATION |
#SEBP35890025
204-9539: CYLINDER BLOCK GP
#SEBP35890026
311-7225: CYLINDER HEAD AS
Parts for your 330C FM EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 3B-0623 | [6] | PLUG-CUP | |
2. | 8M-5860 | [18] | PLUG-CUP | |
3. | 176-7688 | [12] | SEAT-VALVE (STANDARD,INTAKE) | |
317-7201 AB | [1] | SEAT-VALVE (0.127-MM OS) | ||
317-7202 AB | [1] | SEAT-VALVE (0.25-MM OS) | ||
317-7203 AB | [1] | SEAT-VALVE (0.508-MM OS) | ||
4. | 176-7690 | [12] | SEAT-VALVE (STANDARD,EXHAUST) | |
317-7204 AB | [1] | SEAT-VALVE (0.127-MM OS) | ||
317-7205 AB | [1] | SEAT-VALVE (0.25-MM OS) | ||
317-7206 AB | [1] | SEAT-VALVE (0.508-MM OS) | ||
5. | 229-1490 | [6] | SLEEVE-INJECTOR | |
7. | 310-7255 | [6] | SEAL-O-RING | |
8. | 310-7257 | [6] | SEAL-O-RING | |
A | NOT PART OF THIS GROUP | |||
B | USE AS REQUIRED |
#SEBP35890027
311-7226: CYLINDER HEAD AS
311-7226 CYLINDER HEAD AS
S/N 4ZF20655-UP; 7AZ1-UP
PART OF 273-3034 CYLINDER HEAD GP
S/N 4ZF20655-UP; 7AZ1-UP
PART OF 273-3034 CYLINDER HEAD GP
Parts for your 330C FM EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 6V-7604 | [6] | PLUG-CUP | |
2. | 8M-5860 | [18] | PLUG-CUP | |
3. | 176-7688 | [12] | SEAT-VALVE (STANDARD) | |
317-7201 AB | [1] | SEAT-VALVE (0.127-MM OS) | ||
317-7202 AB | [1] | SEAT-VALVE (0.25-MM OS) | ||
317-7203 AB | [1] | SEAT-VALVE (0.508-MM OS) | ||
4. | 176-7690 | [12] | SEAT-VALVE (STANDARD) | |
317-7204 AB | [1] | SEAT-VALVE (0.127-MM OS) | ||
317-7205 AB | [1] | SEAT-VALVE (0.25-MM OS) | ||
317-7206 AB | [1] | SEAT-VALVE (0.508-MM OS) | ||
5. | 229-1490 | [6] | SLEEVE-INJECTOR | |
7. | 310-7255 | [6] | SEAL-O-RING | |
8. | 310-7257 | [6] | SEAL-O-RING | |
A | NOT PART OF THIS GROUP | |||
B | USE AS REQUIRED |
#SEBP35890028
210-5984: CYLINDER HEAD GP
210-5984 CYLINDER HEAD GP
S/N 4ZF2708-20654; 4ZF21574-24534; 4ZF24629-25104
PART OF 210-5987 CYLINDER HEAD GP
S/N 4ZF2708-20654; 4ZF21574-24534; 4ZF24629-25104
PART OF 210-5987 CYLINDER HEAD GP
Parts for your 330C FM EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 2A-4429 | [48] | LOCK-RETAINER | |
2. | 211-2134 | [24] | RETAINER | |
3. | 163-2442 | [12] | VALVE-INLET | |
4. | 260-4856 | [24] | GUIDE-VALVE (STANDARD, EXHAUST) | |
203-3237 | GUIDE-VALVE (0.13-MM OS, EXHAUST) | |||
203-3238 | GUIDE-VALVE (0.5-MM OS, EXHAUST) | |||
5. | 163-2478 | [24] | SEAL-VALVE STEM | |
6. | 321-8638 | [5] | PLUG AS | |
(EACH INCLUDES) | ||||
6A. | 214-7568 | [1] | SEAL-O-RING | |
321-8635 | [1] | PLUG | ||
7. | 319-6237 | [2] | PLUG AS | |
(EACH INCLUDES) | ||||
7A. | 228-7096 | [1] | SEAL-O-RING | |
271-7442 | [1] | PLUG | ||
8. | 183-7889 | [12] | SEAT-VALVE SPRING | |
9. | 188-3122 | [12] | VALVE-EXHAUST | |
10. | 190-6115 | [24] | SPRING-VALVE (INNER) | |
11. | 190-6117 | [24] | SPRING-VALVE (OUTER) | |
12. | Y | [1] | CYLINDER HEAD AS | |
13. | 148-8395 | [2] | PLUG AS | |
(EACH INCLUDES) | ||||
13A. | 3K-0360 | [1] | SEAL-O-RING | |
9S-8005 | [1] | PLUG (3/4-16-THD) | ||
14. | 8T-6764 | [2] | PLUG-PIPE (1/8-27-THD) | |
Y | SEPARATE ILLUSTRATION |
#SEBP35890029
210-5987: CYLINDER HEAD GP
Parts for your 330C FM EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 167-0171 Y | [26] | FASTENER GP-CYLINDER HEAD | |
2. | 187-1315 | [1] | GASKET AS | |
3. | 210-5984 Y | [1] | CYLINDER HEAD GP | |
4. | 8C-4984 M | [5] | BOLT (M8X1.25X150-MM) | |
5. | 9M-1974 | [5] | WASHER-HARD (8.8X16X2-MM THK) | |
M | METRIC PART | |||
R | REMANUFACTURED PART MAY BE AVAILABLE | |||
Y | SEPARATE ILLUSTRATION |
Information:
BASIC ENGINE
CYLINDER BLOCK GP
Special Instruction
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Using the
Specifications
Tool Operating Manual
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Using the
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Testing and Adjusting
Disassembly and Assembly