ELECTRICAL AND STARTING SYSTEM
ALARM GPALTERNATOR GP-CHARGING
BATTERY GP
ELECTRICAL AND STARTING SYSTEM
ALARM GP#SEBP35900130
145-0541: ALARM GP-TRAVEL
Parts for your 365B II EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 213-9100 | [1] | ALARM AS (BACKUP) | |
| 9X-1813 BE | SLEEVE | |||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 2. | 8T-4189 M | [2] | BOLT (M8X1.25X20-MM) | |
| 3. | 8T-4224 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 4. | 116-0118 | [1] | CLIP | |
| 5. | 8T-4191 M | [1] | BOLT (M10X1.5X16-MM) | |
| 6. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 7. | 163-6661 | [1] | COVER | |
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP35900131
107-7977: ALTERNATOR GP-CHARGING
107-7977 ALTERNATOR GP-CHARGING
S/N 6AR1-UP
24 VOLT, 70 AMPERE
FIELD REPLACEMENT FOR @@@@@132-2156@@@@@
S/N 6AR1-UP
24 VOLT, 70 AMPERE
FIELD REPLACEMENT FOR @@@@@132-2156@@@@@
Parts for your 365B II EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1H-3244 | [2] | LOCKWASHER | |
| 2. | 6V-8187 | [1] | NUT (1/4-28-THD) | |
| 3. | 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 4. | 3T-6354 | [1] | REGULATOR AS-VOLTAGE (24-VOLT)(ALTERNATOR) | |
| 5. | 9L-6770 | [1] | CAP-DUST | |
| 6. | 2K-4821 | [1] | LOCKNUT (5/8-18-THD) | |
| 8. | 4B-2047 | [1] | NUT (10-24-THD) | |
| 9. | 8T-0328 | [1] | WASHER-HARD (5.5X10X1-MM THK) | |
| 10. | 8F-1434 | [1] | LOCKWASHER | |
| 11. | 3E-5450 | [1] | COVER | |
| 12. | 4B-2043 | [4] | NUT (8-32-THD) | |
| 13. | 9B-7233 | [4] | LOCKWASHER | |
| 14. | 3E-5448 | [1] | CONNECTOR | |
| 15. | 3E-5446 | [1] | CONNECTOR | |
| 16. | 3E-5457 | [1] | DIODE AS | |
| 18. | 7N-9023 | [3] | SCREW AS (8-32X26.9-MM) | |
| 19. | 3E-5460 | [1] | HOLDER AS-BRUSH | |
| 20. | 3E-5459 | [2] | BRUSH AS-ALTERNATOR | |
| 21. | 3N-3718 | [2] | SCREW AS | |
| 22. | 3E-5458 | [1] | CAPACITOR AS-ALTERNATOR | |
| 23. | 4M-5281 | [1] | BOLT (1/4-20X0.75-IN) | |
| 24. | 3E-5454 | [1] | FAN-ALTERNATOR (11-BLADE) | |
| 25. | 3E-5455 | [1] | HOUSING | |
| 26. | 5P-7807 | [1] | BALL BEARING | |
| 27. | 3E-5447 | [1] | PLATE | |
| 28. | 030-9612 | [3] | SCREW-FORMING (10-24X0.5-IN) | |
| 29. | 132-1222 | [1] | ROTOR AS-ALTERNATOR (24-VOLT) | |
| 30. | 132-1223 | [1] | STATOR AS-ALTERNATOR (24-VOLT) | |
| 31. | 132-1224 | [1] | FRAME AS-ALTERNATOR | |
| 32. | 5P-6920 | [1] | BEARING-ROLLER | |
| 33. | 132-1228 | [1] | KIT-ALTERNATOR TERMINAL (BATTERY) | |
| (INCLUDES NUTS, TERMINAL, LOCKWASHER, INSULATOR & ADAPTER) | ||||
| 34. | 132-1230 | [1] | KIT-ALTERNATOR TERMINAL (RELAY) | |
| (INCLUDES INSULATOR, WASHER, NUT & TERMINAL) | ||||
#SEBP35900132
132-2156: ALTERNATOR GP-CHARGING
132-2156 ALTERNATOR GP-CHARGING
S/N 6AR1-UP
24 VOLT, 70 AMPERE
PART OF 145-5959 ALTERNATOR GP-CHARGING
FIELD REPLACEMENT ORDER @@@@@107-7977@@@@@
S/N 6AR1-UP
24 VOLT, 70 AMPERE
PART OF 145-5959 ALTERNATOR GP-CHARGING
FIELD REPLACEMENT ORDER @@@@@107-7977@@@@@
Parts for your 365B II EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1H-3244 | [2] | LOCKWASHER | |
| 2. | 6V-8187 | [1] | NUT (1/4-28-THD) | |
| 3. | 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 4. | 3T-6354 | [1] | REGULATOR AS-VOLTAGE (24-VOLT)(ALTERNATOR) | |
| 5. | 9L-6770 | [1] | CAP-DUST | |
| 6. | 2K-4821 | [1] | LOCKNUT (5/8-18-THD) | |
| 7. | 7F-7621 | [1] | WASHER (0.635X1.25X0.09-IN THK) | |
| 8. | 4B-2047 | [1] | NUT (10-24-THD) | |
| 9. | 8T-0328 | [1] | WASHER-HARD (5.5X10X1-MM THK) | |
| 10. | 8F-1434 | [1] | LOCKWASHER | |
| 11. | 3E-5450 | [1] | COVER | |
| 12. | 4B-2043 | [4] | NUT (8-32-THD) | |
| 13. | 9B-7233 | [4] | LOCKWASHER | |
| 14. | 3E-5448 | [1] | CONNECTOR | |
| 15. | 3E-5446 | [1] | CONNECTOR | |
| 16. | 3E-5457 | [1] | DIODE AS (ALT) | |
| 17. | 132-1225 | [1] | RECTIFIER AS-ALTERNATOR | |
| 18. | 7N-9023 | [3] | SCREW AS (8-32X26.9-MM) | |
| 19. | 3E-5460 | [1] | HOLDER AS-BRUSH | |
| 20. | 3E-5459 | [2] | BRUSH AS-ALTERNATOR | |
| 21. | 3N-3718 | [2] | SCREW AS | |
| 22. | 3E-5458 | [1] | CAPACITOR AS-ALTERNATOR | |
| 23. | 8T-9367 | [1] | BOLT (1/4-20X2-IN) | |
| 24. | 3E-5454 | [1] | FAN-ALTERNATOR (11-BLADE) | |
| 25. | 3E-5455 | [1] | HOUSING | |
| 26. | 5P-7807 | [1] | BALL BEARING | |
| 27. | 3E-5447 | [1] | PLATE | |
| 28. | 030-9612 | [3] | SCREW-FORMING (10-24X0.5-IN) | |
| 29. | 132-1222 | [1] | ROTOR AS-ALTERNATOR (24-VOLT) | |
| 30. | 132-1223 | [1] | STATOR AS-ALTERNATOR (24-VOLT) | |
| 31. | 132-1224 | [1] | FRAME AS-ALTERNATOR | |
| 32. | 5P-6920 | [1] | BEARING-ROLLER | |
| 33. | 132-1228 | [1] | KIT-ALTERNATOR TERMINAL (BATTERY) | |
| (INCLUDES TERMINAL, NUTS, ADAPTER, LOCKWASHER & INSULATOR) | ||||
| 34. | 132-1230 | [1] | KIT-ALTERNATOR TERMINAL (RELAY)(INDICATOR LIGHT) | |
| (INCLUDES WASHER, NUT, TERMINAL & INSULATOR) | ||||
| 35. | 132-1229 | [1] | KIT-ALTERNATOR TERMINAL (INDICATOR LIGHT)(RELAY) | |
| (INCLUDES BUSHINGS, NUTS, CONNECTOR, LOCKWASHER, WASHER, RECTIFIER & TERMINAL) | ||||
| 36. | 126-2368 | [1] | KIT-ALTERNATOR GUARD | |
| (INCLUDES BOLT, SCREW & LOCKWASHER) | ||||
#SEBP35900133
141-6157: ALTERNATOR GP-CHARGING
141-6157 ALTERNATOR GP-CHARGING
S/N 6AR1-3646
PART OF 210-9261 ENGINE AR-COMPLETE
S/N 6AR1-3646
PART OF 210-9261 ENGINE AR-COMPLETE
Parts for your 365B II EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-7577 Y | [1] | ALTERNATOR GP-CHARGING (24-VOLT, 75-AMPERE) | |
| 2. | 141-4141 | [1] | BRACKET AS-ALTERNATOR | |
| 3. | 6V-8197 M | [1] | BOLT (M12X1.75X40-MM) | |
| 4. | 148-2101 | [1] | BRACKET-ALTERNATOR | |
| 5. | 6H-1717 | [1] | BOLT (1/2-13X1.125-IN) | |
| 6. | 6V-3822 M | [2] | BOLT (M10X1.5X35-MM) | |
| 7. | 3E-4353 | [2] | WASHER-HARD (11X25X3-MM THK) | |
| 8. | 8T-5001 M | [2] | BOLT (M12X1.75X130-MM) | |
| 9. | 198-1206 | [1] | BRACKET | |
| 10. | 7D-1649 | [6] | WASHER-HARD (13.5X32X5-MM THK) | |
| 11. | 5P-8245 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 12. | 6V-8149 M | [3] | NUT (M12X1.75-THD) | |
| 13. | 9H-8260 | [1] | BOLT (1/2-13X6.25-IN) | |
| 14. | 8T-0106 M | [1] | BOLT (M12X1.75X100-MM) | |
| 15. | 1F-7958 | [1] | NUT-FULL (1/2-13-THD) | |
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP35900134
141-6157: ALTERNATOR GP-CHARGING
141-6157 ALTERNATOR GP-CHARGING
S/N 6AR3647-UP
PART OF 210-9261, 210-9262 ENGINE AR-COMPLETE
S/N 6AR3647-UP
PART OF 210-9261, 210-9262 ENGINE AR-COMPLETE
Parts for your 365B II EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 141-4141 | [1] | BRACKET AS-ALTERNATOR | |
| 2. | 177-9953 Y | [1] | ALTERNATOR GP-CHARGING (24-VOLT, 80-AMPERE) | |
| 3. | 6V-8197 M | [1] | BOLT (M12X1.75X40-MM) | |
| 4. | 148-2101 | [1] | BRACKET-ALTERNATOR | |
| 5. | 6H-1717 | [1] | BOLT (1/2-13X1.125-IN) | |
| 6. | 6V-3822 M | [2] | BOLT (M10X1.5X35-MM) | |
| 7. | 3E-4353 | [2] | WASHER-HARD (11X25X3-MM THK) | |
| 8. | 8T-5001 M | [2] | BOLT (M12X1.75X130-MM) | |
| 9. | 198-1206 | [1] | BRACKET | |
| 10. | 7D-1649 | [6] | WASHER-HARD (13.5X32X5-MM THK) | |
| 11. | 5P-8245 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 12. | 6V-8149 M | [3] | NUT (M12X1.75-THD) | |
| 13. | 9H-8260 | [1] | BOLT (1/2-13X6.25-IN) | |
| 14. | 8T-0106 M | [1] | BOLT (M12X1.75X100-MM) | |
| 15. | 1F-7958 | [1] | NUT-FULL (1/2-13-THD) | |
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP35900135
145-5959: ALTERNATOR GP-CHARGING
145-5959 ALTERNATOR GP-CHARGING
S/N 6AR1-3646
PART OF 210-9262 ENGINE AR-COMPLETE
S/N 6AR1-3646
PART OF 210-9262 ENGINE AR-COMPLETE
Parts for your 365B II EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 132-2156 Y | [1] | ALTERNATOR GP-CHARGING | |
| 2. | 141-4141 | [1] | BRACKET AS-ALTERNATOR | |
| 3. | 6V-8197 M | [1] | BOLT (M12X1.75X40-MM) | |
| 4. | 148-2101 | [1] | BRACKET-ALTERNATOR | |
| 5. | 6H-1717 | [1] | BOLT (1/2-13X1.125-IN) | |
| 6. | 6V-3822 M | [2] | BOLT (M10X1.5X35-MM) | |
| 7. | 3E-4353 | [2] | WASHER-HARD (11X25X3-MM THK) | |
| 8. | 8T-5001 M | [2] | BOLT (M12X1.75X130-MM) | |
| 9. | 198-1206 | [1] | BRACKET | |
| 10. | 7D-1649 | [6] | WASHER-HARD (13.5X32X5-MM THK) | |
| 11. | 5P-8245 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 12. | 6V-8149 M | [3] | NUT (M12X1.75-THD) | |
| 13. | 9H-8260 | [1] | BOLT (1/2-13X6.25-IN) | |
| 14. | 8T-0106 M | [1] | BOLT (M12X1.75X100-MM) | |
| 15. | 1F-7958 | [1] | NUT-FULL (1/2-13-THD) | |
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP35900136
177-9953: ALTERNATOR GP-CHARGING
177-9953 ALTERNATOR GP-CHARGING
S/N 6AR3647-UP
24-VOLT, 80-AMPERE
PART OF 141-6157 ALTERNATOR GP-CHARGING
S/N 6AR3647-UP
24-VOLT, 80-AMPERE
PART OF 141-6157 ALTERNATOR GP-CHARGING
Parts for your 365B II EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 185-2653 | [1] | FRAME | |
| 2. | 5S-7349 | [1] | BOLT (1/4-20X0.5-IN) | |
| 3. | 185-2639 | [1] | FAN AS | |
| 4. | 1H-3244 | [1] | LOCKWASHER | |
| 5. | 185-2645 | [1] | FRAME | |
| 6. | 2K-4821 | [1] | LOCKNUT (5/8-18-THD) | |
| 7. | 5P-8247 | [1] | WASHER-HARD (17X32X3.5-MM THK) | |
| 8. | 228-9657 | [1] | COVER AS | |
| 9. | 8T-4205 | [1] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 10. | 185-2647 | [1] | GROMMET | |
| 11. | 9L-6770 | [1] | CAP-DUST | |
| 12. | 185-2643 | [1] | STATOR AS | |
| 13. | 185-2638 | [2] | COLLAR | |
| 14. | 185-2654 | [1] | PLATE | |
| 15. | 185-2650 | [1] | ROTOR AS | |
| 16. | 185-2644 | [1] | COIL AS | |
| 17. | 185-2648 | [1] | REGULATOR AS-VOLTAGE (24-VOLT)(ALTERNATOR) | |
| 18. | 6V-8189 J | [1] | NUT (5/16-18-THD) | |
| 19. | 8T-4224 J | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 20. | 3F-9556 J | [1] | LOCKWASHER | |
| AVAILABLE REPAIR KIT(S): | ||||
| 199-7891 J | KIT-TERMINAL (ALTERNATOR AIR) | |||
| (INCLUDES INSULATORS, WASHERS, NUT, STEP NUT) | ||||
| 185-2655 | KIT-BEARING (ALTERNATOR) | |||
| (INCLUDES 2 BEARINGS) | ||||
| 199-8436 | KIT-TERMINAL (ALTERNATOR AIR) | |||
| (INCLUDES HOLDER AS, PLATE, INSULATOR, PIN, BOLT, GROMMET, NUT) | ||||
| 185-2658 | KIT-HARDWARE (ALTERNATOR AIR) | |||
| (INCLUDES BOLTS) | ||||
| J | KIT MARKED J SEVICES PART(S) MARKED J | |||
#SEBP35900137
3E-7577: ALTERNATOR GP-CHARGING
3E-7577 ALTERNATOR GP-CHARGING
S/N 6AR1-3646
24 VOLT, 75 AMPERE
PART OF 141-6157 ALTERNATOR GP-CHARGING
S/N 6AR1-3646
24 VOLT, 75 AMPERE
PART OF 141-6157 ALTERNATOR GP-CHARGING
Parts for your 365B II EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9S-2011 | [1] | SCREW-MACHINE (1/4-20X0.5-IN) | |
| 2. | 1H-3244 | [1] | LOCKWASHER | |
| 3. | 187-2034 | [1] | NUT-FLANGE (5/8-18-THD) | |
| 5. | 9S-2260 | [1] | PLATE-COVER | |
| 6. | 9S-2255 | [1] | COVER | |
| 7. | 9S-2262 | [1] | GASKET | |
| 8. | 9S-2544 | [6] | SCREW-HEX HEAD (8-32X11.13-MM) | |
| 9. | 9B-7233 | [10] | LOCKWASHER | |
| 10. | 9S-2437 | [5] | SCREW-TAPPING (10-24X19.05-MM) | |
| 11. | 8F-1434 | [5] | LOCKWASHER | |
| 12. | 5P-3418 | [1] | BEARING-ROLLER | |
| 13. | 5P-3419 | [1] | RACE-BEARING INNER | |
| 14. | 9S-2396 | [1] | BUSHING-TERMINAL | |
| 15. | 9S-2393 | [3] | DIODE-NEGATIVE | |
| 16. | 9N-0943 | [1] | PLUG-BEARING WELL | |
| 17. | 9F-2247 | [1] | PLUG-PIPE | |
| 18. | 9S-2292 J | [1] | HEAT SINK AS | |
| 19. | 100-6656 | [1] | DIODE AS-ALTERNATOR | |
| 20. | 9S-9830 | [4] | SCREW-FORMING (8-32X19.05-MM) | |
| 21. | 8C-9660 | [4] | WASHER (4.6X7.9X0.8-MM THK) | |
| 22. | 9S-2300 | [4] | INSULATOR | |
| 23. | 9S-2301 | [1] | INSULATION | |
| 24. | 9S-2248 | [1] | COIL & SUPPORT AS | |
| 25. | 9N-3388 | [3] | BOLT (10-24X0.75-IN) | |
| 26. | 3T-6354 | [1] | REGULATOR AS-VOLTAGE (24-VOLT) | |
| 27. | 7N-9023 | [1] | SCREW AS (8-32X26.9-MM) | |
| 28. | 6N-1872 | [2] | SCREW AS (8-32X1.25-IN) | |
| 29. | 4B-2043 | [4] | NUT (8-32-THD) | |
| 30. | 100-6657 | [1] | PLATE | |
| 31. | 9S-2302 | [1] | ROTOR AS | |
| 32. | 9S-2005 | [1] | GROMMET | |
| 33. | 2L-8075 | [3] | TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW) | |
| 34. | 100-6658 | [1] | WIRE AS-ALTERNATOR | |
| 35. | 9S-2389 | [1] | STUD AS | |
| 36. | 9L-6770 | [1] | CAP-DUST | |
| 37. | 2P-5616 | [1] | FRAME-DRIVE END | |
| 38. | 9S-2390 | [1] | RETAINER | |
| 39. | 9X-2500 | [4] | SCREW-HEX FLANGE (10-24X38.1-MM) | |
| 40. | 9S-2009 | [4] | BOLT-FLANGE HEAD (10-24X3.625-IN) | |
| 41. | 100-6532 | [1] | COLLAR-ALTERNATOR | |
| 42. | 5P-7807 | [1] | BALL BEARING | |
| 43. | 100-6531 | [1] | FAN-ALTERNATOR (11-BLADE) | |
| 44. | 9S-3451 | [1] | STATOR AS | |
| 45. | 9S-2006 | [1] | INSULATOR | |
| 46. | 9S-2005 | [1] | GROMMET | |
| 47. | 9S-2014 | [3] | CLIP | |
| AVAILABLE REPAIR KIT(S): | ||||
| 9S-2013 | [1] | KIT-RELAY TERMINAL (ALTERNATOR AIR) | ||
| (INCLUDES BUSHING, O-RING & HARDWARE) | ||||
| 9S-2012 | [1] | KIT-OUTPUT TERMINAL (ALTERNATOR AIR) | ||
| (INCLUDES GASKETS,TERMINALS, & HARDWARE) | ||||
| 9S-2290 J | [3] | KIT-DIODE JUNCTION STUD (HEAT SINK) | ||
| (EACH INCLUDES INSULATOR & STUD) | ||||
| 9S-2291 J | [3] | KIT-POSITIVE DIODE (HEAT SINK) | ||
| (EACH INCLUDES DIODE) | ||||
| J | PART MARKED J INCLUDES KIT(S) MARKED J | |||
#SEBP35900138
145-0539: BATTERY & WIRING GP
145-0539 BATTERY & WIRING GP
S/N DER1-UP
PART OF 164-3553 STARTING AR-COLD WEATHER
AN ATTACHMENT
S/N DER1-UP
PART OF 164-3553 STARTING AR-COLD WEATHER
AN ATTACHMENT
Parts for your 365B II EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-4137 M | [3] | BOLT (M10X1.5X20-MM) | |
| 2. | 8T-4121 | [8] | WASHER-HARD (11X21X2.5-MM THK) | |
| 3. | 111-4837 | [10] | CLIP | |
| 4. | 7N-0719 Y | [1] | SWITCH GP-DISCONNECT (BATTERY) | |
| 5. | 149-5006 | [1] | CABLE AS | |
| 9W-3460 | [1] | TERMINAL AS-BATTERY (POSITIVE) | ||
| 1M-6119 | [1] | BOLT (5/16-18X1.375-IN) | ||
| 1M-6120 | [1] | NUT (5/16-18-THD) | ||
| 1S-7251 | [1] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | ||
| 5P-0761 E | CABLE (00-GA, RED)(340CM) | |||
| 8N-0869 | [1] | COVER-TERMINAL (RED) | ||
| 8N-1725 | [1] | COVER AS-TERMINAL (RED) | ||
| 6. | 157-4822 M | [2] | BOLT (M10X1.5X250-MM) | |
| 7. | 8V-0622 | [1] | CABLE AS-BATTERY (JUMPER) | |
| 8C-5917 | [1] | TERMINAL AS-BATTERY (POSITIVE) | ||
| 1M-6119 | [2] | BOLT (5/16-18X1.375-IN) | ||
| 1M-6120 | [2] | NUT (5/16-18-THD) | ||
| 5P-0761 E | CABLE (00-GA, RED)(14CM) | |||
| 8T-9757 | [1] | TERMINAL AS-BATTERY (NEGATIVE) | ||
| 9G-0003 | [1] | COVER AS-TERMINAL (BLACK) | ||
| 9G-0004 | [1] | COVER AS-TERMINAL (RED) | ||
| 8. | 149-5007 | [1] | CABLE AS | |
| 1S-7252 | [1] | TERMINAL-CABLE (00-GA, 3/8-IN SCREW) | ||
| 9W-3459 | [1] | TERMINAL AS-BATTERY (NEGATIVE) | ||
| 1M-6119 | [1] | BOLT (5/16-18X1.375-IN) | ||
| 1M-6120 | [1] | NUT (5/16-18-THD) | ||
| 5P-0747 E | CABLE (00-GA, BLACK)(295CM) | |||
| 7N-5274 | [1] | COVER AS-TERMINAL (BLACK) | ||
| 9G-8909 | [1] | COVER-TERMINAL (BLACK) | ||
| 9. | 161-3117 | [2] | KNOB AS | |
| (EACH INCLUDES) | ||||
| 7X-2533 M | [1] | BOLT (M6X1X35-MM) | ||
| 10. | 5C-7261 M | [2] | NUT (M8X1.25-THD) | |
| 11. | 124-9108 | [2] | ROD | |
| 12. | 161-3115 | [1] | COVER | |
| 13. | 9X-9730 | [2] | BATTERY GP (12-VOLT) | |
| (EACH INCLUDES) | ||||
| 7N-0060 | [6] | VENT AS | ||
| 14. | 198-7070 | [1] | SUPPORT AS | |
| 15. | 8T-4186 M | [3] | BOLT (M10X1.5X40-MM) | |
| 16. | 4I-5049 M | [2] | NUT-SPACER (M6X1-THD) | |
| 17. | 5P-1075 | [2] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 18. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 19. | 8T-4195 M | [2] | BOLT (M10X1.5X30-MM) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP35900139
222-4657: BATTERY & WIRING GP
Parts for your 365B II EXCAVATOR:
CATERPILLAR SISInformation:
ELECTRICAL AND STARTING SYSTEM
ALARM GP
Special Instruction
Installation of 244-1090 Alarm Gp {7400, 7402, 7407}
Installation of 244-1090 Alarm Gp {7400, 7402, 7407}
Installation of 244-1090 Alarm Gp {7400, 7402, 7407}
