287-0070 ENGINE AR-COMPLETE S/N MAB1-UP; PAB1-UP PART OF 217-5470 ENGINE AR FIELD REPLACEMENT ORDER @@@@@305-4783@@@@@, 1- 5I-7679 GASKET, 1-094-7583 CLAMP AS, 1-305-4826 FILM-ENGINE AN ATTACHMENT 320C

287-0070 ENGINE AR-COMPLETE
S/N MAB1-UP; PAB1-UP
PART OF 217-5470 ENGINE AR
FIELD REPLACEMENT ORDER @@@@@305-4783@@@@@, 1- 5I-7679 GASKET, 1-094-7583 CLAMP AS, 1-305-4826 FILM-ENGINE
AN ATTACHMENT

i02623473 SEBP3593

For full view, you need register

Parts for your 320C EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
287-0092 Y	[1]	ENGINE AR
255-2876 Y	[1]	PULLEY GP-ENGINE
Y		SEPARATE ILLUSTRATION

#SEBP35930021

287-0072: ENGINE AR-COMPLETE

ENGINE AR-COMPLETE

287-0072 ENGINE AR-COMPLETE
S/N MAB1-UP; PAB1-UP
PART OF 266-6278 ENGINE AR
FIELD REPLACEMENT ORDER @@@@@305-4783@@@@@, 1- 5I-7679 GASKET, 1-094-7583 CLAMP AS, 1-305-4830 FILM-ENGINE
AN ATTACHMENT

i02623620 SEBP3593

For full view, you need register

Parts for your 320C EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
287-0092 Y	[1]	ENGINE AR
239-6664 Y	[1]	PULLEY GP-ENGINE
Y		SEPARATE ILLUSTRATION

#SEBP35930022

287-0074: ENGINE AR-COMPLETE

ENGINE AR-COMPLETE

287-0074 ENGINE AR-COMPLETE
S/N MAB1-UP; PAB1-UP
PART OF 266-6277 ENGINE AR
FIELD REPLACEMENT ORDER @@@@@305-4783@@@@@, 1- 5I-7679 GASKET, 1-094-7583 CLAMP AS, 1-305-4832 FILM-ENGINE
AN ATTACHMENT

i02602473 SEBP3593

For full view, you need register

Parts for your 320C EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
287-0092 Y	[1]	ENGINE AR
239-6664 Y	[1]	PULLEY GP-ENGINE
Y		SEPARATE ILLUSTRATION

#SEBP35930023

305-4783: ENGINE AR-COMPLETE

ENGINE AR-COMPLETE

305-4783 ENGINE AR-COMPLETE
S/N MAB1-UP; PAB1-UP; MAE1-UP
FIELD REPLACEMENT FOR @@@@@287-0069@@@@@, @@@@@287-0070@@@@@, @@@@@287-0072@@@@@, @@@@@287-0074@@@@@, @@@@@222-8188@@@@@

i02832657 SEBP3593

For full view, you need register

Parts for your 320C EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
212-8561 Y	[1]	ALTERNATOR GP-CHARGING
178-6502 Y	[1]	BREATHER GP
178-6512 Y	[1]	CAMSHAFT GP
178-6584 Y	[1]	COOLER GP-ENGINE OIL
212-8545 Y	[1]	COVER GP-VALVE MECHANISM
212-8549 Y	[1]	CRANKSHAFT GP
212-8546 Y	[1]	CYLINDER BLOCK GP
212-8543 Y	[1]	CYLINDER HEAD GP
266-6331 Y	[1]	FAN GP-SUCTION
212-8554 Y	[1]	FILTER GP-ENGINE OIL
212-8560 Y	[1]	FILTER GP-FUEL
205-6792 Y	[1]	FLYWHEEL GP
212-8550 Y	[1]	GEAR GP-FRONT
196-7972 Y	[1]	HOUSING GP-FLYWHEEL
212-8547 Y	[1]	HOUSING GP-FRONT
266-6315 Y	[1]	INSULATION GP-HEAT
178-6524 Y	[1]	LINES GP-ENGINE OIL
212-8558 Y	[1]	LINES GP-FUEL INJECTION
5I-7770 Y	[1]	LINES GP-TURBOCHARGER OIL
212-8614 Y	[1]	LINES GP-WATER
212-8552 Y	[1]	MANIFOLD GP-EXHAUST
212-8551 Y	[1]	MANIFOLD GP-INLET
266-6316 Y	[1]	MOUNTING GP-ALTERNATOR
125-2963 Y	[1]	MOUNTING GP-STARTING MOTOR
324-4172 Y	[1]	MUFFLER GP
233-1161 Y	[6]	NOZZLE GP-UNIT INJECTOR
178-6516 Y	[1]	PAN GP-OIL
233-1157 Y	[1]	PISTON & ROD GP
239-6561 Y	[1]	PULLEY GP-ENGINE
279-7861 Y	[1]	PUMP GP-FUEL INJECTION
212-8555 Y	[1]	PUMP GP-WATER
272-4774 Y	[1]	STARTING MOTOR GP-ELECTRIC
279-7860 Y	[1]	TURBOCHARGER GP
212-8544 Y	[1]	VALVE MECHANISM GP

		AVAILABLE REPAIR KIT(S):
233-1135	[1]	KIT-GASKET (FULL)
233-1136	[1]	KIT-GASKET (UPPER)
R		REMANUFACTURED PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

#SEBP35930024

201-3836: INSTALLATION AR-ENGINE

INSTALLATION AR-ENGINE

201-3836 INSTALLATION AR-ENGINE
S/N MAB1-UP; PAB1-UP
PART OF 193-6840, 193-6841 GENERAL AR

i01848790 SEBP3593

For full view, you need register

Parts for your 320C EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
201-3837 Y	[1]	COMPRESSOR GP-REFRIGERANT
217-9385 Y	[1]	CONDENSER & MTG GP-REFRIGERANT
201-3833 Y	[1]	LINES GP-AIR
204-0875 Y	[1]	LINES GP-AIR
162-6184 Y	[1]	LINES GP-MUFFLER DRAIN
162-6185 Y	[1]	LINES GP-ENGINE OIL DRAIN
162-6232 Y	[1]	AIR CLEANER & MOUNTING GP
162-6256 Y	[1]	MOUNTING GP-ENGINE
204-0873 Y	[1]	RADIATOR & HYD OIL COOLER GP
Y		SEPARATE ILLUSTRATION

#SEBP35930025

178-6512: CAMSHAFT GP

CAMSHAFT GP

178-6512 CAMSHAFT GP
PART OF 201-3878, 287-0092 ENGINE AR, 305-4783 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT

i01307892 SEBP3593

For full view, you need register

Parts for your 320C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-4200 M	[2]	BOLT (M8X1.25X16-MM)
2.	3B-4505	[2]	LOCKWASHER
3.	5I-7650	[1]	PLATE
4.	094-4628	[1]	KEY
5.	178-6535	[1]	CAMSHAFT
6.	279-7859	[12]	TAPPET
7.	5I-7723	[12]	PUSHROD
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP35930026

212-8545: COVER GP-VALVE MECHANISM

COVER GP-VALVE MECHANISM

212-8545 COVER GP-VALVE MECHANISM
PART OF 201-3878, 287-0092 ENGINE AR, 305-4783 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT

i01702758 SEBP3593

2128545 COVER GP-VALVE MECHANISM Parts scheme

For full view, you need register

Parts for your 320C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5I-7626	[6]	NUT
2.	176-4983	[6]	GASKET
3.	297-7662	[1]	CAP (ENGINE OIL FILL)
4.	5I-8001	[2]	COVER
5.	255-2993	[2]	GASKET (VALVE COVER)
6.	4P-6445	[1]	PLATE-CAT

#SEBP35930027

212-8549: CRANKSHAFT GP

CRANKSHAFT GP

212-8549 CRANKSHAFT GP
PART OF 201-3878, 287-0092 ENGINE AR, 305-4783 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT

i01846474 SEBP3593

For full view, you need register

Parts for your 320C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	233-1277	[1]	PLATE
2.	125-3005	[1]	CRANKSHAFT GP
3.	5I-7674	[1]	GEAR
4.	085-9513	[2]	PIN
5.	094-4628	[2]	KEY
6.	130-7596	[1]	NUT
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP35930028

212-8546: CYLINDER BLOCK GP

CYLINDER BLOCK GP

212-8546 CYLINDER BLOCK GP
PART OF 201-3878, 287-0092 ENGINE AR, 305-4783 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT

i01846464 SEBP3593

For full view, you need register

Parts for your 320C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	212-8566 Y	[1]	CYLINDER BLOCK GP
2.	212-8567	[1]	EYE
3.	5I-7603	[1]	EYE
4.	8T-4179 M	[2]	BOLT (M12X1.75X20-MM)
5.	096-2501	[2]	LOCKWASHER
6.	5I-7588	[7]	SET-BEARING (STANDARD)
	5I-7784 AB		SET-BEARING (0.25-MM US)
	5I-7785 AB		SET-BEARING (0.5-MM US)
	5I-7786 AB		SET-BEARING (0.75-MM US)
7.	5I-7654	[3]	PLATE (STANDARD)
	5I-7787 AB		PLATE (0.15-MM OS)
	5I-7788 AB		PLATE (0.3-MM OS)
	5I-7789 AB		PLATE (0.45-MM OS)
8.	266-6210	[1]	SWITCH-PRESSURE (ENGINE OIL PRESSURE)
9.	4D-7794	[1]	CLIP
10.	5I-7978	[1]	SLEEVE
11.	7X-2536 M	[1]	BOLT (M8X1.25X14-MM)
12.	3B-4505	[1]	LOCKWASHER
13.	8T-4137 M	[2]	BOLT (M10X1.5X20-MM)
14.	7X-0796	[2]	LOCKWASHER (10.2X18.4X2.5-MM THK)
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP35930029

212-8566: CYLINDER BLOCK GP

CYLINDER BLOCK GP

212-8566 CYLINDER BLOCK GP
PART OF 212-8546 CYLINDER BLOCK GP
ALSO AN ATTACHMENT

i01715552 SEBP3593

For full view, you need register

Parts for your 320C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5I-7505	[9]	PLUG
2.	095-2039	[1]	WASHER-SPECIAL
3.	8T-4191 M	[1]	BOLT (M10X1.5X16-MM)
4.	5I-7523	[6]	SLEEVE
5.	5I-7724	[2]	PIN
6.	095-2005	[2]	CAP
7.	222-8201	[1]	SHAFT
8.	095-2011	[1]	CAP
10.	094-7741 M	[14]	BOLT-BEARING CAP (M14X2X120-MM)
11.	096-3741	[5]	CAP
12.	3P-1896	[6]	PLUG-CUP
13.	5I-8009	[1]	BUSHING
14.	5I-7526	[12]	VALVE (COOLING JET)
15.	5I-7528	[2]	BUSHING
16.	4I-9664	[4]	PIN
17.	5I-7529	[1]	BUSHING
18.	5I-7525	[1]	PLUG
19.	099-4420	[2]	PIN
20.	6V-8236	[6]	PIN-SPRING
21.	5I-7524	[2]	SEAL
	M		METRIC PART

Information:

ENGINE ARRANGEMENT

ENGINE AR

Truck Engine News

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/23

Engine News

Improved Registration Process for Retrofit Products {1000, 7000}
2011/04/15

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/25

Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}

Special Instruction

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

Technical Information Bulletin

A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}
A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}

Tool Operating Manual

Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}

142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}

Reuse And Salvage Guidelines

Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}

Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}

Service Magazine

A New Screen In The TMI System Provides The Status Of Emission Certification Of Engines {1000}
2001/01/08

Caterpillar's Position On The Use Of Biodiesel Fuel In Caterpillar Engines {1000}
2012/09/17

A List Of Contacts For Caterpillar Product Support Is Available {1000, 4450, 7000}
2002/03/25

Proper Long Term Storage of Caterpillar Products {0355, 1000, 7000}
2009/04/27

Changes To Caterpillar Incident Reporting Field Use Form And DSN Incident Report Entry Screens {1000, 7000}
2009/11/18

Redesigned Fluid Sampling Valves Are Now Available for All Cat Products {7542}
2011/02/11

Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17

TA2 (Technical Analysis) Inspections are Now Available on SIS {0372, 1000, 7000, 753T, 7565}
2013/01/10

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/24

Caterpillar Parts SIS Catalog 320C :

287-0069 ENGINE AR-COMPLETE

266-6270 ENGINE AR-COMPLETE

255-3056 ENGINE AR-COMPLETE

287-0072 ENGINE AR-COMPLETE

287-0074 ENGINE AR-COMPLETE

305-4783 ENGINE AR-COMPLETE

201-3836 INSTALLATION AR-ENGINE

178-6512 CAMSHAFT GP

212-8545 COVER GP-VALVE MECHANISM

212-8549 CRANKSHAFT GP

212-8546 CYLINDER BLOCK GP

Truck sale:

Caterpillar 320C
- Crawler Excavators
WESTERN STATES EQUIPMENT

288,000

Caterpillar 320 CF, Crawler Excavators, Construction
- Crawler Excavators
WHEELER MACHINERY CO.

45,597

Caterpillar 320C, Crawler Excavators, Construction
- Crawler Excavators
FINNING CANADA

287,325

Caterpillar 320 CF, Crawler Excavators, Construction
- Crawler Excavators
WHEELER MACHINERY CO.

287,325

Caterpillar 320 CF, Crawler Excavators, Construction
- Crawler Excavators
WHEELER MACHINERY CO.