170-2967 FENDER & COVER GP S/N ANF1-UP PART OF 215-4356, 269-5099 CHASSIS AR 315C EXCAVATOR

FRAME AND BODY

FENDER GP

0. 170-2967 FENDER & C

FRAME GP

1. 203-7323 FRAME GP-U

GEAR & BEARING GP

2. 171-9381 GEAR & BEA
3. 171-9381 GEAR & BEA
4. 171-9381 GEAR & BEA
5. 171-9381 GEAR & BEA
6. 171-9381 GEAR & BEA
7. 171-9381 GEAR & BEA

GUARD GP

8. 203-5199 GUARD GP-B
9. 203-5200 GUARD GP-B
0. INFORMATION

EXCAVATOR 315C EXCAVATOR ANF
315C L Excavator ANF00001-UP (MACHINE) POWERED BY 3054 Engine SEBP3595 315C ANF (2001)

FRAME AND BODY

FENDER GP

170-2967 FENDER & COVER GP

#SEBP35950220

170-2967: FENDER & COVER GP

FENDER & COVER GP

170-2967 FENDER & COVER GP
S/N ANF1-UP
PART OF 215-4356, 269-5099 CHASSIS AR

i01459569 SEBP3595

For full view, you need register

Parts for your 315C EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	170-2986	[2]	GROMMET
2.	177-5687	[1]	COVER
3.	193-9766	[1]	STEP AS
4.	135-8573	[2]	BOLT AS
5.	135-8575	[4]	BOLT AS
6.	7Y-2853	[2]	SPACER (13X38X5-MM THK)

#SEBP35950221

203-7323: FRAME GP-UPPER

FRAME GP-UPPER

203-7323 FRAME GP-UPPER
S/N ANF1-UP
PART OF 215-4356, 269-5099 CHASSIS AR

i01665769 SEBP3595

For full view, you need register

Parts for your 315C EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	203-7324	[1]	FRAME AS-UPPER
1A.	7Y-0633	[1]	BOSS
1B.	186-5639	[1]	STEP AS
2.	107-9739	[2]	PIN AS
3.	118-5982	[2]	SPACER (73X105X14-MM THK)
4.	8T-4780 M	[3]	BOLT (M20X2.5X30-MM)
5.	093-0349	[3]	WASHER (22X60X6-MM THK)
6.	093-0118 B	[2]	SHIM (2-MM THK)
7.	133-2424 B	[2]	SHIM (0.5-MM THK)
8.	093-0086 B	[4]	SHIM (1-MM THK)
9.	180-7718	[1]	PIN AS
10.	113-2127 B	[1]	SHIM (0.5-MM THK)
11.	093-0084 B	[2]	SHIM (1-MM THK)
12.	093-0116 B	[1]	SHIM (2-MM THK)
13.	166-1487	[2]	SHIM (2-MM THK)
	B		USE AS REQUIRED
	M		METRIC PART

#SEBP35950222

171-9381: GEAR & BEARING GP-SWING

GEAR & BEARING GP-SWING

171-9381 GEAR & BEARING GP-SWING
S/N ANF1-162
PART OF 221-1049 FRAME AR-UNDERCARRIAGE

i01665717 SEBP3595

1719381 GEAR & BEARING GP-SWING Parts scheme

For full view, you need register

Parts for your 315C EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	171-9382	[1]	GEAR & BEARING GP
	3B-8489	[1]	FITTING-GREASE (1/8-27 PTF)
	148-4685 E		SEAL (690-CM)
2.	6V-3532 M	[30]	BOLT (M20X2.5X60-MM)
3.	8T-4121	[14]	WASHER-HARD (11X21X2.5-MM THK)
4.	8T-4136 M	[12]	BOLT (M10X1.5X25-MM)
5.	171-9464	[62]	SPACER (20.6X38X6-MM THK)
6.	8T-0362 M	[32]	BOLT (M20X2.5X110-MM)
7.	4I-7326	[1]	STRIP
8.	148-4704	[1]	GASKET
9.	148-4703	[1]	COVER
10.	5K-9243	[2]	ELBOW-FLARED
11.	4I-7446	[1]	GASKET
12.	1U-8846 B		SEALANT-GASKET
13.	102-6449	[1]	TUBE AS
14.	4I-7512	[1]	CLAMP-HOSE
15.	4I-7444	[1]	BOOT
16.	4I-7511	[1]	RETAINER
17.	095-7993	[1]	DOWEL
18.	4N-9170	[2]	CLIP
19.	8T-4199 M	[2]	BOLT (M8X1.25X12-MM)
20.	3B-8489	[1]	FITTING-GREASE (1/8-27 PTF)
21.	2Y-5503	[1]	CORK
22.	8T-4137 M	[2]	BOLT (M10X1.5X20-MM)
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP35950223

171-9381: GEAR & BEARING GP-SWING

GEAR & BEARING GP-SWING

171-9381 GEAR & BEARING GP-SWING
S/N ANF163-172
PART OF 221-1049 FRAME AR-UNDERCARRIAGE

i02346710 SEBP3595

For full view, you need register

Parts for your 315C EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	148-4568 C	[1]	GEAR & BEARING GP-SWING (108-BEARING)
	3B-8489	[1]	FITTING-GREASE (1/8-27 PTF)
	148-4685 E		SEAL (690-CM)
2.	6V-3532 M	[30]	BOLT (M20X2.5X60-MM)
3.	8T-4121	[14]	WASHER-HARD (11X21X2.5-MM THK)
4.	8T-4136 M	[12]	BOLT (M10X1.5X25-MM)
5.	171-9464	[62]	SPACER (20.6X38X6-MM THK)
6.	8T-0362 M	[32]	BOLT (M20X2.5X110-MM)
7.	4I-7326	[1]	STRIP
8.	148-4704	[1]	GASKET
9.	148-4703	[1]	COVER
10.	5K-9243	[2]	ELBOW-FLARED
11.	4I-7446	[1]	GASKET
12.	1U-8846 B		SEALANT-GASKET
13.	102-6449	[1]	TUBE AS
14.	4I-7512	[1]	CLAMP-HOSE
15.	4I-7444	[1]	BOOT
16.	4I-7511	[1]	RETAINER
17.	095-7993	[1]	DOWEL
18.	4N-9170	[2]	CLIP
19.	8T-4199 M	[2]	BOLT (M8X1.25X12-MM)
20.	3B-8489	[1]	FITTING-GREASE (1/8-27 PTF)
21.	2Y-5503	[1]	CORK
22.	8T-4137 M	[2]	BOLT (M10X1.5X20-MM)
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP35950224

171-9381: GEAR & BEARING GP-SWING

GEAR & BEARING GP-SWING

171-9381 GEAR & BEARING GP-SWING
S/N ANF173-310
PART OF 221-1049 FRAME AR-UNDERCARRIAGE

i02583100 SEBP3595

For full view, you need register

Parts for your 315C EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	171-9382 C	[1]	GEAR & BEARING GP
	3B-8489	[1]	FITTING-GREASE (1/8-27 PTF)
	148-4685 E		SEAL (690-CM)
2.	6V-3532 M	[30]	BOLT (M20X2.5X60-MM)
3.	8T-4121	[14]	WASHER-HARD (11X21X2.5-MM THK)
4.	8T-4136 M	[12]	BOLT (M10X1.5X25-MM)
5.	171-9464	[62]	SPACER (20.6X38X6-MM THK)
6.	8T-0362 M	[32]	BOLT (M20X2.5X110-MM)
7.	4I-7326	[1]	STRIP
8.	148-4704	[1]	GASKET
9.	148-4703	[1]	COVER
10.	5K-9243	[2]	ELBOW-FLARED
11.	4I-7446	[1]	GASKET
12.	1U-8846 B		SEALANT-GASKET
13.	102-6449	[1]	TUBE AS
14.	4I-7512	[1]	CLAMP-HOSE
15.	4I-7444	[1]	BOOT
16.	4I-7511	[1]	RETAINER
17.	095-7993	[1]	DOWEL
18.	4N-9170	[2]	CLIP
19.	8T-4199 M	[2]	BOLT (M8X1.25X12-MM)
20.	3B-8489	[1]	FITTING-GREASE (1/8-27 PTF)
21.	2Y-5503	[1]	CORK
22.	8T-4137 M	[2]	BOLT (M10X1.5X20-MM)
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP35950225

171-9381: GEAR & BEARING GP-SWING

GEAR & BEARING GP-SWING

171-9381 GEAR & BEARING GP-SWING
S/N ANF311-909
PART OF 221-1049 FRAME AR-UNDERCARRIAGE

i02346723 SEBP3595

For full view, you need register

Parts for your 315C EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	229-1080 C	[1]	GEAR & BEARING GP-SWING (108-BEARING)
1A.	3B-8489	[1]	FITTING-GREASE (1/8-27 PTF)
1B.	229-1081	[1]	SEAL-DUST
1C.	148-4685 E		SEAL (335-CM)
2.	6V-3532 M	[30]	BOLT (M20X2.5X60-MM)
3.	8T-4121	[14]	WASHER-HARD (11X21X2.5-MM THK)
4.	8T-4136 M	[12]	BOLT (M10X1.5X25-MM)
5.	171-9464	[62]	SPACER (20.6X38X6-MM THK)
6.	8T-0362 M	[32]	BOLT (M20X2.5X110-MM)
7.	4I-7326	[1]	STRIP
8.	148-4704	[1]	GASKET
9.	148-4703	[1]	COVER
10.	5K-9243	[2]	ELBOW-FLARED
11.	4I-7446	[1]	GASKET
12.	1U-8846 B		SEALANT-GASKET
13.	102-6449	[1]	TUBE AS
14.	4I-7512	[1]	CLAMP-HOSE
15.	4I-7444	[1]	BOOT
16.	4I-7511	[1]	RETAINER
17.	095-7993	[1]	DOWEL
18.	4N-9170	[2]	CLIP
19.	8T-4199 M	[2]	BOLT (M8X1.25X12-MM)
20.	3B-8489	[1]	FITTING-GREASE (1/8-27 PTF)
21.	2Y-5503	[1]	CORK
22.	8T-4137 M	[2]	BOLT (M10X1.5X20-MM)
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP35950226

171-9381: GEAR & BEARING GP-SWING

GEAR & BEARING GP-SWING

171-9381 GEAR & BEARING GP-SWING
S/N ANF910-991
PART OF 221-1049 FRAME AR-UNDERCARRIAGE

i02880090 SEBP3595

For full view, you need register

Parts for your 315C EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	229-1080	[1]	GEAR & BEARING GP-SWING (108-BEARING)
1A.	3B-8489	[1]	FITTING-GREASE (1/8-27 PTF)
1B.	229-1081	[1]	SEAL-DUST
1C.	148-4685 E		SEAL (335-CM)
2.	112-3927 CM	[30]	BOLT (M20X2.5X90-MM)
3.	8T-4121	[14]	WASHER-HARD (11X21X2.5-MM THK)
4.	8T-4136 M	[12]	BOLT (M10X1.5X25-MM)
5.	171-9464 C	[32]	SPACER (20.6X38X6-MM THK)
6.	8T-0362 M	[32]	BOLT (M20X2.5X110-MM)
7.	4I-7326	[1]	STRIP
8.	148-4704	[1]	GASKET
9.	148-4703	[1]	COVER
10.	5K-9243	[2]	ELBOW-FLARED
11.	4I-7446	[1]	GASKET
12.	1U-8846 B		SEALANT-GASKET
13.	102-6449	[1]	TUBE AS
14.	4I-7512	[1]	CLAMP-HOSE
15.	4I-7444	[1]	BOOT
16.	4I-7511	[1]	RETAINER
17.	095-7993	[1]	DOWEL
18.	4N-9170	[2]	CLIP
19.	8T-4199 M	[2]	BOLT (M8X1.25X12-MM)
20.	3B-8489	[1]	FITTING-GREASE (1/8-27 PTF)
21.	2Y-5503	[1]	CORK
22.	8T-4137 M	[2]	BOLT (M10X1.5X20-MM)
23.	7Y-1863 C	[30]	SPACER (20.5X38X34-MM THK)
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP35950227

171-9381: GEAR & BEARING GP-SWING

GEAR & BEARING GP-SWING

171-9381 GEAR & BEARING GP-SWING
S/N ANF992-UP
PART OF 221-1049 FRAME AR-UNDERCARRIAGE

i02880094 SEBP3595

For full view, you need register

Parts for your 315C EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	229-1080	[1]	GEAR & BEARING GP-SWING (108-BEARING)
1A.	3B-8489	[1]	FITTING-GREASE (1/8-27 PTF)
1B.	229-1081	[1]	SEAL-DUST
1C.	148-4685 E		SEAL (335-CM)
2.	6V-3532 CM	[30]	BOLT (M20X2.5X60-MM)
3.	8T-4121	[14]	WASHER-HARD (11X21X2.5-MM THK)
4.	8T-4136 M	[12]	BOLT (M10X1.5X25-MM)
5.	171-9464 C	[62]	SPACER (20.6X38X6-MM THK)
6.	8T-0362 M	[32]	BOLT (M20X2.5X110-MM)
7.	4I-7326	[1]	STRIP
8.	148-4704	[1]	GASKET
9.	148-4703	[1]	COVER
10.	5K-9243	[2]	ELBOW-FLARED
11.	4I-7446	[1]	GASKET
12.	1U-8846 B		SEALANT-GASKET
13.	102-6449	[1]	TUBE AS
14.	4I-7512	[1]	CLAMP-HOSE
15.	4I-7444	[1]	BOOT
16.	4I-7511	[1]	RETAINER
17.	095-7993	[1]	DOWEL
18.	4N-9170	[2]	CLIP
19.	8T-4199 M	[2]	BOLT (M8X1.25X12-MM)
20.	3B-8489	[1]	FITTING-GREASE (1/8-27 PTF)
21.	2Y-5503	[1]	CORK
22.	8T-4137 M	[2]	BOLT (M10X1.5X20-MM)
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP35950228

203-5199: GUARD GP-BOTTOM

GUARD GP-BOTTOM

203-5199 GUARD GP-BOTTOM
S/N ANF1-749
PART OF 215-4356 CHASSIS AR

i01665766 SEBP3595

For full view, you need register

Parts for your 315C EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	213-8545 Y	[1]	GUARD GP-BOTTOM
2.	135-8576	[28]	BOLT AS-LOCKING
	Y		SEPARATE ILLUSTRATION

#SEBP35950229

203-5200: GUARD GP-BOTTOM

GUARD GP-BOTTOM

203-5200 GUARD GP-BOTTOM -HEAVY-DUTY
S/N ANF1-UP
AN ATTACHMENT

i01663955 SEBP3595

For full view, you need register

Parts for your 315C EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	213-8549 Y	[1]	GUARD GP-BOTTOM
2.	135-8576	[32]	BOLT AS-LOCKING
3.	5P-1076	[3]	WASHER-HARD (13.5X30X4-MM THK)
4.	7X-7478 M	[3]	BOLT-LOCKING (M12X1.75X35-MM)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION