130-4532 PAD AR-TRACK RUBBER S/N ANF1-UP FOR USE WITH 600-MM (24-IN) TRACK AN ATTACHMENT 315C EXCAVATOR

UNDERCARRIAGE

TRACK GP

0. 130-4532 PAD AR-TRA
1. 130-4537 PAD AR-TRA

ROLLER GP

2. 102-8120 ROLLER AR-
3. 8E-5600 ROLLER GP-
4. 163-4143 ROLLER GP-

TRACK ADJUSTER & RECOIL GP

5. 136-2368 TRACK ADJU
6. 168-6766 TRACK ADJU
7. 168-6767 TRACK ADJU
8. 179-2992 TRACK ADJU

TRACK GP

9. 145-2572 TRACK AR
0. INFORMATION

EXCAVATOR 315C EXCAVATOR ANF
315C L Excavator ANF00001-UP (MACHINE) POWERED BY 3054 Engine SEBP3595 315C ANF (2001)

UNDERCARRIAGE

TRACK GP

194-1608 LINK AS-TRACK

9W-9353 LINK AS-TRACK

130-4532 PAD AR-TRACK RUBBER

130-4537 PAD AR-TRACK RUBBER

145-2572 TRACK AR

190-6256 TRACK AR

#SEBP35950270

130-4532: PAD AR-TRACK RUBBER

PAD AR-TRACK RUBBER

130-4532 PAD AR-TRACK RUBBER
S/N ANF1-UP
FOR USE WITH 600-MM (24-IN) TRACK
AN ATTACHMENT

i01063086 SEBP3595

1304532 PAD AR-TRACK RUBBER Parts scheme

For full view, you need register

Parts for your 315C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
1.	130-4534	[88]	PAD-RUBBER (600-MM)

#SEBP35950271

130-4537: PAD AR-TRACK RUBBER

PAD AR-TRACK RUBBER

130-4537 PAD AR-TRACK RUBBER
S/N ANF1-UP
FOR USE WITH 500-MM (20-IN) TRACK
AN ATTACHMENT

i00998399 SEBP3595

1304537 PAD AR-TRACK RUBBER Parts scheme

For full view, you need register

Parts for your 315C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
1.	130-4539	[88]	PAD-RUBBER (500-MM)

#SEBP35950272

102-8120: ROLLER AR-TRACK & CARRIER

ROLLER AR-TRACK & CARRIER

102-8120 ROLLER AR-TRACK & CARRIER
S/N ANF1-UP
PART OF 221-1049 FRAME AR-UNDERCARRIAGE

i01042532 SEBP3595

1028120 ROLLER AR-TRACK & CARRIER Parts scheme

For full view, you need register

Parts for your 315C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-5878 M	[4]	BOLT (M24X3X80-MM)
2.	8E-5600 Y	[4]	ROLLER GP-TRACK CARRIER
3.	163-4143 Y	[14]	ROLLER GP-TRACK-SINGLE FLANGE
4.	7X-2565 M	[56]	BOLT (M20X2.5X100-MM)
5.	8T-4123	[56]	WASHER (3.62X5.75X0.375-MM THK)
			QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP35950273

8E-5600: ROLLER GP-TRACK CARRIER

ROLLER GP-TRACK CARRIER

8E-5600 ROLLER GP-TRACK CARRIER
S/N ANF1-UP
PART OF 102-8120 ROLLER AR-TRACK & CARRIER

i00414716 SEBP3595

8E5600 ROLLER GP-TRACK CARRIER Parts scheme

For full view, you need register

Parts for your 315C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8E-5601	[1]	SHAFT AS-TRACK ROLLER
	8E-5604	[1]	COLLAR-ROLLER END
	8E-5607	[1]	SHAFT-TRACK ROLLER
2.	8E-5608	[1]	SEAL GP-DUO-CONE
3.	8E-5602	[1]	ROLLER & BEARING AS
3A.	8E-6792	[1]	BEARING-TRACK ROLLER
3B.	8E-6793	[1]	BEARING-TRACK ROLLER
4.	8E-5606	[1]	RETAINER
5.	6V-7661	[1]	SEAL-O-RING
6.	8T-1159 M	[5]	BOLT-SOCKET HEAD (M10X1.5X25-MM)
7.	8E-5605	[1]	COVER-CARRIER ROLLER
8.	7H-3171	[1]	PLUG-PIPE
	M		METRIC PART

#SEBP35950274

163-4143: ROLLER GP-TRACK-SINGLE FLANGE

ROLLER GP-TRACK-SINGLE FLANGE

163-4143 ROLLER GP-TRACK-SINGLE FLANGE
S/N ANF1-UP
PART OF 102-8120 ROLLER AR-TRACK & CARRIER

i01035283 SEBP3595

1634143 ROLLER GP-TRACK-SINGLE FLANGE Parts scheme

For full view, you need register

Parts for your 315C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8E-5031	[2]	RING-RETAINING
2.	7F-8268	[2]	SEAL-O-RING
3.	5G-2247	[1]	STOPPER-RUBBER
4.	6Y-0473	[1]	PLUG-CLEAR
5.	8E-5032	[1]	ROLLER & BEARING AS
	8E-5599	[2]	BEARING-TRACK ROLLER
6.	8E-5035	[1]	SHAFT-TRACK ROLLER
7.	8E-5037	[2]	COLLAR-TRACK ROLLER
8.	9W-2142	[2]	SEAL GP-DUO-CONE
9.	3E-3217	[1]	DOWEL

#SEBP35950275

136-2368: TRACK ADJUSTER & RECOIL GP

TRACK ADJUSTER & RECOIL GP

136-2368 TRACK ADJUSTER & RECOIL GP
S/N ANF1-UP
PART OF 179-2992 TRACK ADJUSTER & RECOIL GP

i00778044 SEBP3595

1362368 TRACK ADJUSTER & RECOIL GP Parts scheme

For full view, you need register

Parts for your 315C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7Y-1685	[1]	ROD
2.	096-4276	[1]	RING
3.	095-1701	[1]	SEAL-O-RING
4.	7Y-1780	[1]	CYLINDER
5.	095-1612	[2]	SEAL-O-RING
6.	093-1515	[2]	RING
7.	096-4275	[2]	RING
8.	093-1435	[1]	SEAL-LIP TYPE
9.	136-2369	[1]	PISTON AS
10.	095-2927	[1]	VALVE-FILL
11.	2S-5926	[1]	VALVE-RELIEF

#SEBP35950276

168-6766: TRACK ADJUSTER & RECOIL GP

TRACK ADJUSTER & RECOIL GP

168-6766 TRACK ADJUSTER & RECOIL GP -RH
S/N ANF1-UP
PART OF 168-6764 IDLER GP-FRONT

i01669084 SEBP3595

1686766 TRACK ADJUSTER & RECOIL GP Parts scheme

For full view, you need register

Parts for your 315C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	168-6761	[1]	PLATE AS
2.	179-2992 Y	[1]	TRACK ADJUSTER & RECOIL GP
3.	8T-4137 M	[2]	BOLT (M10X1.5X20-MM)
4.	7Y-1746	[1]	PLATE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP35950277

168-6767: TRACK ADJUSTER & RECOIL GP

TRACK ADJUSTER & RECOIL GP

168-6767 TRACK ADJUSTER & RECOIL GP -LH
S/N ANF1-UP
PART OF 168-6765 IDLER GP-FRONT

i01669089 SEBP3595

1686767 TRACK ADJUSTER & RECOIL GP Parts scheme

For full view, you need register

Parts for your 315C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	179-2992 Y	[1]	TRACK ADJUSTER & RECOIL GP
2.	168-6761	[1]	PLATE AS
	5P-9891	[1]	PLATE-WARNING (HIGH PRESSURE CYLINDER)
	4B-4158	[4]	SCREW-DRIVE (NO 4X0.25-IN)
3.	8T-4137 M	[2]	BOLT (M10X1.5X20-MM)
4.	7Y-1746	[1]	PLATE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP35950278

179-2992: TRACK ADJUSTER & RECOIL GP

TRACK ADJUSTER & RECOIL GP

179-2992 TRACK ADJUSTER & RECOIL GP
S/N ANF1-UP
PART OF 168-6766, 168-6767 TRACK ADJUSTER & RECOIL GP

i01669087 SEBP3595

1792992 TRACK ADJUSTER & RECOIL GP Parts scheme

For full view, you need register

Parts for your 315C EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	136-2368 Y	[1]	TRACK ADJUSTER & RECOIL GP
2.	7Y-1883	[1]	PLATE
3.	179-2993	[1]	SPRING
4.	7Y-1781	[1]	COVER
5.	9X-8259	[1]	WASHER (39X66X6-MM THK)
6.	096-4879 M	[1]	NUT (M36X4-THD)
7.	7Y-1686	[1]	STRIP
8.	8T-4171 M	[2]	BOLT (M6X1X12-MM)
9.	115-3678	[1]	SUPPORT
10.	8T-4179 M	[2]	BOLT (M12X1.75X20-MM)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP35950279

145-2572: TRACK AR

TRACK AR

145-2572 TRACK AR -2-REQUIRED
S/N ANF1-UP
1400-MM (55-IN) TRIPLE GROUSER SHOE
AN ATTACHMENT

i01857733 SEBP3595

For full view, you need register

Parts for your 315C EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
146-9695 Y	[1]	TRACK GP
119-8337	[2]	STEP AS
Y		SEPARATE ILLUSTRATION

Information:

UNDERCARRIAGE

TRACK GP

Operation and Maintenance Manual

Track Adjustment - Inspect
315C Excavator

Track Adjustment - Adjust
315C Excavator

Track Information
315C Excavator

Special Instruction

Guidelines for Narrowing Track Shoe Width or Clipping Grouser Corners {4170}
Guidelines for Narrowing Track Shoe Width or Clipping Grouser Corners {4170}

Technical Information Bulletin

The Use of High-Pressure Water Sprays to Clean the Undercarriage Can Result in Damage to Undercarriage Components on Track Type Tractors, Track Type Loaders and Excavators
The Use of High-Pressure Water Sprays to Clean the Undercarriage Can Result in Damage to Undercarriage Components on Track Type Tractors, Track Type Loaders and Excavators

Tool Operating Manual

Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}

168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}
168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}

NEHS1249 100T Track Repair Group {0374, 0599, 0700, 0729, 4169, 4170}
NEHS1249 100T Track Repair Group {0374, 0599, 0700, 0729, 4169, 4170}

Undercarriage Reconditioning Bulletin

Shop Repair Procedure for Grease Lubricated Track {0729, 4169, 4170, 4175}
Shop Repair Procedure for Grease Lubricated Track {0729, 4169, 4170, 4175}

Track Data Charts {0372, 0374, 4170}
Track Data Charts {0372, 0374, 4170}

Guideline for Reusable Track Parts {4169, 4170, 4171, 4174, 4175}
Guideline for Reusable Track Parts {4169, 4170, 4171, 4174, 4175}

Undercarriage Reconditioning Bulletin Contents {0374, 4150}
Undercarriage Reconditioning Bulletin Contents {0374, 4150}

Track Servicing Equipment, Tooling, Literature, and Training Review {0374, 4169, 4170, 4171, 4172, 4174, 4175, 4176}
Track Servicing Equipment, Tooling, Literature, and Training Review {0374, 4169, 4170, 4171, 4172, 4174, 4175, 4176}

Track Service Evaluation Checklist {4169, 4170, 4171, 4172, 4174, 4175, 4176}
Track Service Evaluation Checklist {4169, 4170, 4171, 4172, 4174, 4175, 4176}

Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}
Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}

Roller Servicing Equipment, Tooling, Literature, and Training Review {0374, 4154, 4180, 4181, 7561}
Roller Servicing Equipment, Tooling, Literature, and Training Review {0374, 4154, 4180, 4181, 7561}

Idler Servicing Equipment, Tooling, Literature, and Training Review {0374, 0599, 4159, 4167, 7561}
Idler Servicing Equipment, Tooling, Literature, and Training Review {0374, 0599, 4159, 4167, 7561}

Idler Service Evaluation Checklist {4159, 4167}
Idler Service Evaluation Checklist {4159, 4167}

Roller Service Evaluation Checklist {4154, 4180, 4181, 7561}
Roller Service Evaluation Checklist {4154, 4180, 4181, 7561}

Track Roller Oil Fill Volume {0645, 4180, 7500, 7579}
Track Roller Oil Fill Volume {0645, 4180, 7500, 7579}

Reusability Recommendations for Duo-Cone Seals {7555, 7561}
Reusability Recommendations for Duo-Cone Seals {7555, 7561}

Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}
Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}

Reconditioning Dimensions for Carrier Rollers {4154, 4180}
Reconditioning Dimensions for Carrier Rollers {4154, 4180}

Procedure for Water-Cooled Welding of Track Rollers {0679, 4180, 7950}
Procedure for Water-Cooled Welding of Track Rollers {0679, 4180, 7950}

Procedure and Guidelines for Cleaning Phosphate Coated Track Pins {4169, 4171, 7950}
Procedure and Guidelines for Cleaning Phosphate Coated Track Pins {4169, 4171, 7950}

Nitrogen Pressure Test Unit <NOBR>FT2724</NOBR> {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}

Procedure for Servicing Master Joints for (320 through 336) Hydraulic Excavators. {4169, 4171}
Procedure for Servicing Master Joints for (320 through 336) Hydraulic Excavators. {4169, 4171}

Reuse And Salvage Guidelines

Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}
Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}

Service Magazine

Portable Test and Fill Machine Designed for a Service Vehicle but Works Fast Enough for the Shop {0768}
2006/02/27

The placement of a Bar Code Sticker on Track Shoes After Heat Treatment is Now Utilized to Verify Heat Treatment. {4172}
2006/12/18

Improved Control of the Heat Treat Process Prevents Track Shoes from Cracking {4170}
2007/02/19

Track Shoe Ice Lug Requirements {4170}
Track Shoe Ice Lug Requirements {4170}

Caterpillar Parts SIS Catalog 315C :

9W-9353 LINK AS-TRACK

194-1608 LINK AS-TRACK

194-1134 LINK AS-TRACK

168-6765 IDLER GP-FRONT

168-6764 IDLER GP-FRONT

168-6763 IDLER GP-FRONT

113-2907 IDLER GP-FRONT

130-4537 PAD AR-TRACK RUBBER

102-8120 ROLLER AR-TRACK & CARRIER

8E-5600 ROLLER GP-TRACK CARRIER

163-4143 ROLLER GP-TRACK-SINGLE FLANGE

136-2368 TRACK ADJUSTER & RECOIL GP

168-6766 TRACK ADJUSTER & RECOIL GP

168-6767 TRACK ADJUSTER & RECOIL GP

179-2992 TRACK ADJUSTER & RECOIL GP

Truck sale:

Caterpillar 315C
- Crawler Excavators
WESTERN STATES EQUIPMENT

274,920

Caterpillar 315 CF, Crawler Excavators, Construction
- Crawler Excavators
WHEELER MACHINERY CO.

274,920

Caterpillar 315 CF, Crawler Excavators, Construction
- Crawler Excavators
WHEELER MACHINERY CO.

274,920

Caterpillar 315 CF, Crawler Excavators, Construction
- Crawler Excavators
WHEELER MACHINERY CO.

274,920

Caterpillar 315 CF, Crawler Excavators, Construction
- Crawler Excavators
WHEELER MACHINERY CO.