AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

297-7772 ENGINE AR-COMPLETE S/N MAC1-UP; PAC1-UP PART OF 217-5471 ENGINE AR FIELD REPLACEMENT ORDER @@@@@305-4783@@@@@, 1- 5I-7679 GASKET, 1-094-7583 CLAMP AS, 1-305-4837 FILM-ENGINE AN ATTACHMENT 320C


ENGINE ARRANGEMENT
ENGINE AR
BASIC ENGINE
CAMSHAFT GP
VALVE MECHANISM GP
CRANKSHAFT GP
CYLINDER BLOCK GP

EXCAVATOR 320C EXCAVATOR MAC
 320C U & 320C LU Excavators MAC00001-UP (MACHINE) POWERED BY 3066 Engine SEBP3601 320C MAC   (2001)

ENGINE ARRANGEMENT

ENGINE AR
287-0078 ENGINE AR-COMPLETE
297-7771 ENGINE AR-COMPLETE
297-7772 ENGINE AR-COMPLETE
305-4783 ENGINE AR-COMPLETE
201-3843 INSTALLATION AR-ENGINE
 

#SEBP36010020
 

297-7772: ENGINE AR-COMPLETE

297-7772 ENGINE AR-COMPLETE
S/N MAC1-UP; PAC1-UP
PART OF 217-5471 ENGINE AR
FIELD REPLACEMENT ORDER @@@@@305-4783@@@@@, 1- 5I-7679 GASKET, 1-094-7583 CLAMP AS, 1-305-4837 FILM-ENGINE
AN ATTACHMENT
i03028220 SEBP3601
  For full view, you need register

Parts for your 320C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  287-0095 Y [1] ENGINE AR  
  255-2876 Y [1] PULLEY GP-ENGINE  
  Y   SEPARATE ILLUSTRATION
 

#SEBP36010021
 

305-4783: ENGINE AR-COMPLETE

305-4783 ENGINE AR-COMPLETE
S/N MAE1-UP
FIELD REPLACEMENT FOR @@@@@287-0076@@@@@, @@@@@287-0077@@@@@, @@@@@297-7772@@@@@
i02832657 SEBP3601
  For full view, you need register

Parts for your 320C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  212-8561 Y [1] ALTERNATOR GP-CHARGING  
  178-6502 Y [1] BREATHER GP  
  178-6512 Y [1] CAMSHAFT GP  
  178-6584 Y [1] COOLER GP-ENGINE OIL  
  212-8545 Y [1] COVER GP-VALVE MECHANISM  
  212-8549 Y [1] CRANKSHAFT GP  
  212-8546 Y [1] CYLINDER BLOCK GP  
  212-8543 Y [1] CYLINDER HEAD GP  
  266-6331 Y [1] FAN GP-SUCTION  
  212-8554 Y [1] FILTER GP-ENGINE OIL  
  212-8560 Y [1] FILTER GP-FUEL  
  205-6792 Y [1] FLYWHEEL GP  
  212-8550 Y [1] GEAR GP-FRONT  
  196-7972 Y [1] HOUSING GP-FLYWHEEL  
  212-8547 Y [1] HOUSING GP-FRONT  
  266-6315 Y [1] INSULATION GP-HEAT  
  178-6524 Y [1] LINES GP-ENGINE OIL  
  212-8558 Y [1] LINES GP-FUEL INJECTION  
  5I-7770 Y [1] LINES GP-TURBOCHARGER OIL  
  212-8614 Y [1] LINES GP-WATER  
  212-8552 Y [1] MANIFOLD GP-EXHAUST  
  212-8551 Y [1] MANIFOLD GP-INLET  
  266-6316 Y [1] MOUNTING GP-ALTERNATOR  
  125-2963 Y [1] MOUNTING GP-STARTING MOTOR  
  324-4172 Y [1] MUFFLER GP  
  233-1161 Y [6] NOZZLE GP-UNIT INJECTOR  
  178-6516 Y [1] PAN GP-OIL  
  233-1157 Y [1] PISTON & ROD GP  
  239-6561 Y [1] PULLEY GP-ENGINE  
  279-7861 Y [1] PUMP GP-FUEL INJECTION  
  212-8555 Y [1] PUMP GP-WATER  
  272-4774 Y [1] STARTING MOTOR GP-ELECTRIC  
  279-7860 Y [1] TURBOCHARGER GP  
  212-8544 Y [1] VALVE MECHANISM GP  
   
    AVAILABLE REPAIR KIT(S):
  233-1135 [1] KIT-GASKET (FULL)  
  233-1136 [1] KIT-GASKET (UPPER)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP36010022
 

201-3843: INSTALLATION AR-ENGINE

201-3843 INSTALLATION AR-ENGINE
S/N MAC1-UP; PAC1-UP
PART OF 193-6856, 193-6857 GENERAL AR
i01853534 SEBP3601
  For full view, you need register

Parts for your 320C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  201-3837 Y [1] COMPRESSOR GP-REFRIGERANT  
  214-1290 Y [1] CONDENSER & MTG GP-REFRIGERANT  
  201-3841 Y [1] LINES GP-AIR  
  204-0879 Y [1] LINES GP-AIR  
  162-6184 Y [1] LINES GP-MUFFLER DRAIN  
  162-6185 Y [1] LINES GP-ENGINE OIL DRAIN  
  171-9155 Y [1] MOUNTING GP-AIR CLEANER  
  162-6256 Y [1] MOUNTING GP-ENGINE  
  204-0876 Y [1] RADIATOR & HYD OIL COOLER GP  
  Y   SEPARATE ILLUSTRATION
 

#SEBP36010023
 

178-6512: CAMSHAFT GP

178-6512 CAMSHAFT GP
S/N MAE1-UP; 7JK60000-99999
PART OF 201-3880, 222-8198, 287-0095, 287-0096 ENGINE AR, 305-4783 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
i01307892 SEBP3601
1786512 CAMSHAFT GP Parts scheme
  For full view, you need register

Parts for your 320C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4200 M [2] BOLT (M8X1.25X16-MM)  
2. 3B-4505 [2] LOCKWASHER (5/16)  
3. 5I-7650 [1] PLATE  
4. 094-4628 [1] KEY  
5. 178-6535 [1] CAMSHAFT  
6. 279-7859 [12] TAPPET  
7. 5I-7723 [12] PUSHROD  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP36010024
 

212-8545: COVER GP-VALVE MECHANISM

212-8545 COVER GP-VALVE MECHANISM
S/N MAE1-UP; 7JK60000-99999
PART OF 201-3880, 287-0095 ENGINE AR, 305-4783 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
i01702758 SEBP3601
2128545 COVER GP-VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your 320C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5I-7626 [6] NUT  
2. 176-4983 [6] GASKET  
3. 297-7662 [1] CAP (ENGINE OIL FILL)  
4. 5I-8001 [2] COVER  
5. 255-2993 [2] GASKET (VALVE COVER)  
6. 4P-6445 [1] PLATE-CAT  
 

#SEBP36010025
 

212-8646: COVER GP-VALVE MECHANISM

212-8646 COVER GP-VALVE MECHANISM
S/N MAE1-UP; 7JK60000-99999
PART OF 222-8198, 287-0096 ENGINE AR
AN ATTACHMENT
i01869917 SEBP3601
2128646 COVER GP-VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your 320C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5I-7626 [6] NUT  
2. 176-4983 [6] GASKET  
3. 297-7662 [1] CAP (ENGINE OIL FILL)  
4. 183-8258 [2] COVER  
5. 255-2993 [2] GASKET (VALVE COVER)  
6. 4P-6445 [1] PLATE-CAT  
 

#SEBP36010026
 

212-8549: CRANKSHAFT GP

212-8549 CRANKSHAFT GP
S/N MAE1-UP; 7JK60000-99999
PART OF 201-3880, 222-8198, 287-0095, 287-0096 ENGINE AR, 305-4783 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
i01846474 SEBP3601
2128549 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your 320C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 233-1277 [1] PLATE  
2. 125-3005 [1] CRANKSHAFT GP  
3. 5I-7674 [1] GEAR  
4. 085-9513 [2] PIN  
5. 094-4628 [2] KEY  
6. 130-7596 [1] NUT  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP36010027
 

212-8546: CYLINDER BLOCK GP

212-8546 CYLINDER BLOCK GP
S/N MAE1-UP; 7JK60000-99999
PART OF 201-3880, 287-0095 ENGINE AR, 305-4783 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
i01846464 SEBP3601
2128546 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 320C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 212-8566 Y [1] CYLINDER BLOCK GP  
2. 212-8567 [1] EYE  
3. 5I-7603 [1] EYE  
4. 8T-4179 M [2] BOLT (M12X1.75X20-MM)  
5. 096-2501 [2] LOCKWASHER  
6. 5I-7588 [7] SET-BEARING (STANDARD)  
  5I-7784 AB SET-BEARING (0.25-MM US)  
  5I-7785 AB SET-BEARING (0.5-MM US)  
  5I-7786 AB SET-BEARING (0.75-MM US)  
7. 5I-7654 [3] PLATE (STANDARD)  
  5I-7787 AB PLATE (0.15-MM OS)  
  5I-7788 AB PLATE (0.3-MM OS)  
  5I-7789 AB PLATE (0.45-MM OS)  
8. 266-6210 [1] SWITCH-PRESSURE (ENGINE OIL PRESSURE)  
9. 4D-7794 [1] CLIP  
10. 5I-7978 [1] SLEEVE  
11. 7X-2536 M [1] BOLT (M8X1.25X14-MM)  
12. 3B-4505 [1] LOCKWASHER (5/16)  
13. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
14. 7X-0796 [2] LOCKWASHER (10.2X18.4X2.5-MM THK)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36010028
 

212-8566: CYLINDER BLOCK GP

212-8566 CYLINDER BLOCK GP
S/N MAE1-UP; 7JK60000-99999
PART OF 212-8546 CYLINDER BLOCK GP
ALSO AN ATTACHMENT
i01715552 SEBP3601
2128566 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 320C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5I-7505 [9] PLUG  
2. 095-2039 [1] WASHER-SPECIAL  
3. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
4. 5I-7523 [6] SLEEVE  
5. 5I-7724 [2] PIN  
6. 095-2005 [2] CAP  
7. 222-8201 [1] SHAFT  
8. 095-2011 [1] CAP  
10. 094-7741 M [14] BOLT-BEARING CAP (M14X2X120-MM)  
11. 096-3741 [5] CAP  
12. 3P-1896 [6] PLUG-CUP  
13. 5I-8009 [1] BUSHING  
14. 5I-7526 [12] VALVE (COOLING JET)  
15. 5I-7528 [2] BUSHING  
16. 4I-9664 [4] PIN  
17. 5I-7529 [1] BUSHING  
18. 5I-7525 [1] PLUG  
19. 099-4420 [2] PIN  
20. 6V-8236 [6] PIN-SPRING  
21. 5I-7524 [2] SEAL  
  M   METRIC PART
 

#SEBP36010029
 

217-5416: CYLINDER BLOCK GP

217-5416 CYLINDER BLOCK GP
S/N MAE1-UP; 7JK60000-99999
PART OF 222-8242 CYLINDER BLOCK GP
AN ATTACHMENT
i01870041 SEBP3601
2175416 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 320C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5I-7505 [9] PLUG  
2. 095-2039 [1] WASHER-SPECIAL  
3. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
4. 5I-7523 [6] SLEEVE  
5. 5I-7724 [2] PIN  
6. 095-2005 [2] CAP  
7. 222-8201 [1] SHAFT  
8. 095-2011 [1] CAP  
10. 094-7741 M [14] BOLT-BEARING CAP (M14X2X120-MM)  
11. 096-3741 [5] CAP  
12. 3P-1896 [6] PLUG-CUP  
13. 5I-8009 [1] BUSHING  
14. 5I-7526 [12] VALVE (COOLING JET)  
15. 5I-7528 [2] BUSHING  
16. 4I-9664 [4] PIN  
17. 5I-7529 [1] BUSHING  
18. 5I-7525 [1] PLUG  
19. 099-4420 [2] PIN  
20. 6V-8236 [6] PIN-SPRING  
21. 5I-7524 [2] SEAL  
  M   METRIC PART
 

Information:

Truck Engine News
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/23
Engine News
Improved Registration Process for Retrofit Products {1000, 7000}
2011/04/15
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/25
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Special Instruction
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Technical Information Bulletin
A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}
A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
Reuse And Salvage Guidelines
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Service Magazine
A New Screen In The TMI System Provides The Status Of Emission Certification Of Engines {1000}
2001/01/08
Caterpillar's Position On The Use Of Biodiesel Fuel In Caterpillar Engines {1000}
2012/09/17
A List Of Contacts For Caterpillar Product Support Is Available {1000, 4450, 7000}
2002/03/25
Proper Long Term Storage of Caterpillar Products {0355, 1000, 7000}
2009/04/27
Changes To Caterpillar Incident Reporting Field Use Form And DSN Incident Report Entry Screens {1000, 7000}
2009/11/18
Redesigned Fluid Sampling Valves Are Now Available for All Cat Products {7542}
2011/02/11
Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17
TA2 (Technical Analysis) Inspections are Now Available on SIS {0372, 1000, 7000, 753T, 7565}
2013/01/10
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/24

Caterpillar Parts SIS Catalog 320C :

297-7771 ENGINE AR-COMPLETE
287-0078 ENGINE AR-COMPLETE
287-0077 ENGINE AR-COMPLETE
287-0076 ENGINE AR-COMPLETE
287-0096 ENGINE AR
287-0095 ENGINE AR
275-3678 ENGINE AR
222-8198 ENGINE AR
305-4783 ENGINE AR-COMPLETE
201-3843 INSTALLATION AR-ENGINE
CAMSHAFT GP
178-6512 CAMSHAFT GP
COVER GP-VALVE MECHANISM
212-8545 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
212-8646 COVER GP-VALVE MECHANISM
CRANKSHAFT GP
212-8549 CRANKSHAFT GP
CYLINDER BLOCK GP
212-8546 CYLINDER BLOCK GP
CYLINDER BLOCK GP
212-8566 CYLINDER BLOCK GP

Truck sale:

 
 
Caterpillar 320C
- Crawler Excavators
WESTERN STATES EQUIPMENT
 
288,000 
Caterpillar 320 CF, Crawler Excavators, Construction
- Crawler Excavators
WHEELER MACHINERY CO.
Caterpillar 320C, Crawler Excavators, Construction
45,597 
Caterpillar 320C, Crawler Excavators, Construction
- Crawler Excavators
FINNING CANADA
 
287,325 
Caterpillar 320 CF, Crawler Excavators, Construction
- Crawler Excavators
WHEELER MACHINERY CO.
 
287,325 
Caterpillar 320 CF, Crawler Excavators, Construction
- Crawler Excavators
WHEELER MACHINERY CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.