AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

2129771 - CONTROL GP-STEERING (STIC STEER) PROVIDES KIT TO CONVERT STIC STEER JOYSTICK TO PUSH/PULL OPERATION AN ATTACHMENT R1600G


OPERATOR STATION
CONTROL GP-STEERING
STEERING SYSTEM
CYLINDER GP
LINES GP

LOAD HAUL DUMP R1600G LOAD HAUL DUMP 9PP
 R1600 G LOAD HAUL DUMP 9PP00001-UP (MACHINE) SEBP3605 R1600G 9PP   (2003)

OPERATOR STATION

CONTROL GP-STEERING
CONTROL GP-STEERING
240-6933 CONTROL GP-STEERING
CONTROL GP-STEERING
248-0099 CONTROL GP-STEERING
CONTROL GP-STEERING
212-9771 CONTROL GP-STEERING
CONTROL GP-STEERING
160-0857 CONTROL GP-STEERING
 

#SEBP36050440
 

212-9771: CONTROL GP-STEERING

2129771 - CONTROL GP-STEERING (STIC STEER)
PROVIDES KIT TO CONVERT STIC STEER JOYSTICK TO PUSH/PULL OPERATION
AN ATTACHMENT
l340329 SEBP3605
2129771 CONTROL GP-STEERING Parts scheme
  For full view, you need register

Parts for your R1600G LOAD HAUL DUMP:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 229-0935 [1] LOCK-SWING ARM  
2. 229-0936 [1] MOUNT  
3. 229-0937 [1] BRACKET  
4. 257-5183 C [1] HOSE AS  
  122-6896 [1] HOSE (01440 MM )  
  124-1952 [1] COUPLING  
  124-2002 [1] COUPLING  
5. 226-2523 [1] HOSE AS  
  122-6896 [1] HOSE (01300 MM )  
  124-1952 [1] COUPLING  
  124-2002 [1] COUPLING  
6. 229-0938 [1] HOUSING-STIC CONTROL  
7. 7K-1181 F [2] STRAP-CABLE  
8. 229-0939 [1] HOUSING-STIC CONTROL  
9. 229-0940 [1] COVER-HOSE  
10. 229-0941 [1] COVER AS-STEERING VALVE  
  [1] PLATE-BACKING  
  [1] FLAP-RUBBER  
  [1] COVER-STEERING VALVE  
  9M-5733 [3] RIVET-POP (4.78MM DIA)  
11. 186-9050 [1] BUSH  
  C   INDICATES CHANGE
  F   NOT SHOWN
 

#SEBP36050441
 

160-0857: CONTROL GP-STEERING

1600857 - CONTROL GP-STEERING (WHEEL STEER)
This is part of 2133365 - STEERING AR-WHEEL (WHEEL STEER)
AN ATTACHMENT
l340330 SEBP3605
1600857 CONTROL GP-STEERING Parts scheme
  For full view, you need register

Parts for your R1600G LOAD HAUL DUMP:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8R-2918 [1] KNOB AS  
2. 8R-2916 [1] BUTTON AS  
3. 8R-8438 [1] STEERING WHEEL  
4. 9S-1354 [1] NUT-JAM (5/8UNF)  
5. 5P-8247 [1] WASHER-HARD (5/8)  
6. 6F-0253 [1] WASHER (5/8)  
7. 186-8535 [1] SHAFT  
8. 5H-6480 [1] RING-RETAINING  
9. 6K-8162 [1] RING-RETAINING  
10. 6K-8161 [1] BALL BEARING  
11. 186-9787 [1] BOSS-STEERING SHAFT  
12. 6V-6945 [4] SCREW (3/8UNC X 1 1/4)  
 

#SEBP36050442
 

160-1402: CYLINDER & MTG GP-STEERING

1601402 - CYLINDER & MTG GP-STEERING
This is part of 1604027 - STEERING AR
l340331 SEBP3605
1601402 CYLINDER & MTG GP-STEERING Parts scheme
  For full view, you need register

Parts for your R1600G LOAD HAUL DUMP:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2H-3749 [4] BOLT (3/4UNF X 7)  
2. 5P-8248 [4] WASHER-HARD (3/4)  
3. 186-9181 [4] COLLET  
4. 186-9185 [4] PIN  
5. 2K-4160 [8] WASHER-SPECIAL  
6. 186-9180 [4] COLLET  
7. 8V-5216 Y [2] CYLINDER & SEAL GP-STEERING  
8. 5M-6213 [2] PLUG-PIPE  
9. 186-8239 [24] BUNG (6)  
10. 213-7583 [24] PLUG  
  Y   SEPARATE ILLUSTRATION
 

#SEBP36050443
 

8V-5216: CYLINDER & SEAL GP-STEERING

8V5216 - CYLINDER & SEAL GP-STEERING
This is part of 1601402 - CYLINDER & MTG GP-STEERING
l340332 SEBP3605
8V5216 CYLINDER & SEAL GP-STEERING Parts scheme
  For full view, you need register

Parts for your R1600G LOAD HAUL DUMP:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-9203 [4] SEAL-LIP  
2. 6E-5024 Y [1] CYLINDER GP-STEERING (TYPE 2)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP36050444
 

6E-5024: CYLINDER GP-STEERING

6E5024 - CYLINDER GP-STEERING
This is part of 8V5216 - CYLINDER & SEAL GP-STEERING
102MM (4) BORE X 597MM (24) STROKE
l340333 SEBP3605
6E5024 CYLINDER GP-STEERING Parts scheme
  For full view, you need register

Parts for your R1600G LOAD HAUL DUMP:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
   
    TYPE 1 COMPONENT LIST
   
1. 6E-5025 R [1] CYLINDER AS  
  6E-1497 [1] BOSS  
  7J-9682 [1] BEARING-SLEEVE  
2. 8C-3411 M [1] BOLT (M30 X 3.5 X 90)  
3. 6J-2797 J [1] RING-WEAR  
4. 8C-9160 J [1] SEAL AS  
5. 289-2935 J [1] SEAL AS-BUFFER  
6. 289-2946 J [1] SEAL-U-CUP  
7. 308-1845 J [1] SEAL-WIPER  
8. 6E-5028 R [1] ROD AS  
  7J-9682 [1] BEARING-SLEEVE  
9. 9T-3133 [1] PISTON  
10. 4T-5613 J [1] RING-WEAR  
11. 175-7900 CJ [1] SEAL-O-RING  
12. 6E-0775 [1] HEAD  
13. 2K-6830 J [1] RING-BACKUP  
14. 3S-7023 [1] WASHER-HARD (1 1/4)  
15. 8J-0484 [1] RING-RETAINING  
   
    THE FOLLOWING SEAL REPAIR KIT IS AVAILABLE
   
  240-9538 CK [1] KIT-SEAL  
   
    TYPE 2 COMPONENT LIST
   
16. 6E-5025 R [1] CYLINDER AS  
  6E-1497 [1] BOSS  
  7J-9682 [1] BEARING-SLEEVE  
17. 173-9683 [1] BOLT-HEX HEAD  
18. 6J-2797 J [1] RING-WEAR  
19. 8C-9160 J [1] SEAL AS  
20. 289-2935 J [1] SEAL AS-BUFFER  
21. 289-2946 J [1] SEAL-U-CUP  
22. 308-1845 J [1] SEAL-WIPER  
23. 6E-5028 R [1] ROD AS  
  7J-9682 [1] BEARING-SLEEVE  
24. 9T-3133 [1] PISTON  
25. 4T-5613 J [1] RING-WEAR  
26. 175-7900 J [1] SEAL-O-RING  
27. 6E-0775 [1] HEAD  
28. 2K-6830 J [1] RING-BACKUP  
29. 3S-7023 [1] WASHER-HARD (1 1/4)  
   
    THE FOLLOWING SEAL REPAIR KIT IS AVAILABLE
   
  240-9538 CK [1] KIT-SEAL  
  R   REMFG PART MAY BE AVAIL
  M   METRIC PART
  J   KIT J INCLUDES PARTS MARKED J
  C   INDICATES CHANGE
  K   KIT
 

#SEBP36050445
 

211-8337: LINES GP-REVERSIBLE STEERING

2118337 - LINES GP-REVERSIBLE STEERING (STIC STEER)
AN ATTACHMENT
l340336 SEBP3605
2118337 LINES GP-REVERSIBLE STEERING Parts scheme
  For full view, you need register

Parts for your R1600G LOAD HAUL DUMP:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-8806 [1] MANIFOLD  
2. 116-0118 [1] CLIP  
3. 152-8346 Y [1] VALVE GP-SOLENOID  
4. 8T-9377 [2] BOLT (3/8UNC X 2 1/4)  
5. 8T-4896 [4] WASHER-HARD (3/8)  
6. 6V-8801 [2] NUT-HARD-PLT (3/8UNC)  
7. 2R-6806 [2] CONNECTOR (9/16-18 STR)  
8. 2P-1314 [2] CONNECTOR  
9. 3J-1907 [4] SEAL-O-RING (11.89MM ID)  
10. 225-9319 [1] BRACKET  
11. 5P-2675 [2] BOLT-PLT (1/4UNC X 1 3/4)  
12. [1] HOSE AS  
  122-6896 [1] HOSE (00835 MM )  
  124-1952 [1] COUPLING  
  124-2025 [1] COUPLING  
13. 225-9321 [1] HOSE AS  
  122-6896 [1] HOSE (00760 MM )  
  124-1952 [1] COUPLING  
  124-2025 [1] COUPLING  
14. 7K-1181 [3] STRAP-CABLE  
15. 8T-4205 [2] WASHER-HARD-PLT (1/4)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP36050446
 

214-2092: LINES GP-REVERSIBLE STEERING

2142092 - LINES GP-REVERSIBLE STEERING (WHEEL STEER)
AN ATTACHMENT
l340337 SEBP3605
2142092 LINES GP-REVERSIBLE STEERING Parts scheme
  For full view, you need register

Parts for your R1600G LOAD HAUL DUMP:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 225-9633 [2] HOSE AS  
    (Each Includes)
  122-6898 [1] HOSE (00325 MM )  
  124-1956 [1] COUPLING  
  124-2005 [1] COUPLING  
2. 3J-1907 [6] SEAL-O-RING (11.89MM ID)  
3. 2R-6806 [4] CONNECTOR (9/16-18 STR)  
4. 8T-8806 [1] MANIFOLD  
5. 152-8346 Y [1] VALVE GP-SOLENOID  
6. 4L-6459 [2] BOLT-PLT (3/8UNC X 2 1/2)  
7. 8T-4896 [4] WASHER-HARD (3/8)  
8. 6V-8801 [2] NUT-HARD-PLT (3/8UNC)  
9. 225-9319 [1] BRACKET  
10. 116-0118 [1] CLIP  
  Y   SEPARATE ILLUSTRATION
 

#SEBP36050447
 

160-1450: LINES GP-SECONDARY STEERING

1601450 - LINES GP-SECONDARY STEERING
This is part of 2456216 - CERTIFICATION AR-MACHINE (EUROPEAN)
AN ATTACHMENT
l340338 SEBP3605
1601450 LINES GP-SECONDARY STEERING Parts scheme
  For full view, you need register

Parts for your R1600G LOAD HAUL DUMP:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 203-1206 [1] COUPLING  
2. 4Z-6482 Y [1] VALVE GP-DIVERTER  
3. 186-9431 [1] TUBE AS  
4. 186-9432 [1] TUBE AS  
5. 122-6916 D [1] HOSE-HYDRAULIC (00200 MM )  
6. 5P-2230 [2] CLAMP-HOSE  
7. 1P-4579 [6] FLANGE-HALF  
8. 4J-0524 [3] SEAL-O-RING (47.22MM ID)  
9. 8T-8919 [8] BOLT (1/2UNC X 1 3/4)  
10. 8T-4223 [12] WASHER-HARD (1/2)  
11. 186-9608 [1] MANIFOLD  
12. [1] HOSE AS ( ORIENT. 274 DEG.)  
  3S-7252 [2] SLEEVE  
  5P-0181 [1] HOSE (00620 MM )  
  6D-9961 [1] COUPLING  
  7S-0575 [1] COUPLING  
13. 225-9640 [1] HOSE AS ( ORIENT. 273 DEG.)  
  3S-7252 [2] SLEEVE  
  5P-0181 [1] HOSE (00645 MM )  
  5S-2105 [1] COUPLING  
  7S-3122 [1] COUPLING  
14. 8T-4183 M [4] BOLT (M12 X 1.75 X 40)  
15. 8T-8916 [4] BOLT (7/16UNC X 1 1/2)  
16. 8T-4196 M [4] BOLT-PLT (M10 X 1.5 X 35)  
17. 8T-4121 M [16] WASHER-HARD-PLT (M10)  
18. 8C-3206 [6] FLANGE-HALF  
19. 4J-0520 [5] SEAL-O-RING (32.92MM ID)  
20. 8T-5005 M [4] BOLT-PLT (M10 X 1.5 X 70)  
21. 8T-5360 [8] WASHER-HARD-PLT (7/16)  
22. 1P-4578 [2] FLANGE  
23. 4J-0522 [2] SEAL-O-RING (37.69MM ID)  
24. 115-7669 Y [1] PUMP GP-GEAR  
25. 225-9641 [1] HOSE AS  
  122-6898 [1] HOSE (00560 MM )  
  124-2114 [1] COUPLING  
  124-2144 [1] COUPLING  
26. 6V-8636 [1] CONNECTOR  
27. 3J-1907 [1] SEAL-O-RING (11.89MM ID)  
28. 6V-8397 [2] SEAL-O-RING (9.27MM ID)  
29. 4L-9337 [4] BOLT (3/8UNC X 1 1/2)  
30. 186-9663 [1] BLOCK  
31. 8T-4896 [4] WASHER-HARD (3/8)  
32. 8T-4178 M [4] BOLT-PLT (M10 X 1.5 X 90)  
33. 7V-8532 [1] SPACER  
34. 7X-0313 C [4] BOLT-PLT (7/16UNC X 2 3/4)  
35. 3E-6429 [1] SWITCH AS-FLOW  
  102-8802 [1] KIT-RECEPTACLE (2 PIN)  
  186-3735 [2] PIN-CONNECTOR  
  3E-3365 [1] WEDGE  
36. 3K-0360 [1] SEAL-O-RING (16.36MM ID)  
37. 116-0118 [1] CLIP  
38. 8T-0271 M [4] BOLT (M10 X 1.5 X 35)  
  Y   SEPARATE ILLUSTRATION
  D   ORDER BY THE METRE
  M   METRIC PART
  C   INDICATES CHANGE
 

#SEBP36050448
 

160-1837: LINES GP-STEERING

1601837 - LINES GP-STEERING
This is part of 1604027 - STEERING AR
l340339 SEBP3605
1601837 LINES GP-STEERING Parts scheme
  For full view, you need register

Parts for your R1600G LOAD HAUL DUMP:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8637 [2] CONNECTOR-SEAL  
2. 3D-2824 [4] SEAL-O-RING (23.47MM ID)  
3. 6V-9004 [1] ELBOW-45 DEGREE  
4. 6V-9007 [1] ELBOW  
5. 6V-9746 [12] SEAL-O-RING (18.94MM ID)  
6. 225-9644 [1] HOSE AS  
  3S-7166 [2] SLEEVE  
  5P-0180 [1] HOSE (00540 MM )  
  6V-9953 [1] COUPLING  
  6V-9955 [1] COUPLING  
7. 225-9645 [1] HOSE AS  
  3S-7166 [2] SLEEVE  
  5P-0180 [1] HOSE (01180 MM )  
  6V-9953 [1] COUPLING  
  6V-9954 [1] COUPLING  
8. 225-9646 [1] HOSE AS  
  3S-7166 [2] SLEEVE  
  5P-0180 [1] HOSE (02140 MM )  
  6V-9953 [2] COUPLING  
9. 225-9647 [1] HOSE AS  
  3S-7166 [2] SLEEVE  
  5P-0180 [1] HOSE (01745 MM )  
  6V-9953 [2] COUPLING  
10. 8T-8917 [7] BOLT-PLT (1/2UNC X 1 1/4)  
11. 8T-4223 [7] WASHER-HARD (1/2)  
12. 7G-3834 [3] CLIP (SLOT)  
13. 7G-3833 [3] CLIP (TAB)  
14. 7G-3832 [3] GROMMET  
15. 5P-7466 [1] CLIP (SLOT)  
16. 5P-7467 [1] CLIP (TAB)  
17. 5P-8112 [1] GROMMET  
18. 7X-0275 [1] BOLT-PLT (5/16UNC X 3 1/4)  
19. 6V-8189 [1] NUT-HARD-PLT (5/16UNC)  
20. 8T-4224 [2] WASHER-HARD-PLT (M8)  
21. 9V-8409 [2] CLAMP  
22. 7V-6234 [2] PLATE  
23. 2P-1293 [2] LOCKNUT-BULKHEAD  
24. 132-5152 [2] TEE-UNION  
25. 304-1581 [1] HOSE AS  
  3S-7166 [2] SLEEVE  
  5P-0180 [1] HOSE (01030 MM )  
  6V-4676 [1] COUPLING  
  6V-9953 [1] COUPLING  
26. 225-9649 [1] HOSE AS  
  3S-7166 [2] SLEEVE  
  5P-0180 [1] HOSE (00965 MM )  
  6V-4676 [1] COUPLING  
  6V-9953 [1] COUPLING  
27. 4J-0520 [2] SEAL-O-RING (32.92MM ID)  
28. 1P-4577 [4] FLANGE-HALF  
29. 5S-7382 [8] BOLT-PLT (3/8UNC X 1 3/8)  
30. 8T-4896 [8] WASHER-HARD (3/8)  
31. 7K-1181 [3] STRAP-CABLE  
 

#SEBP36050449
 

183-4513: LINES GP-STEERING

1834513 - LINES GP-STEERING (WHEEL STEER)
This is part of 2133365 - STEERING AR-WHEEL (WHEEL STEER)
AN ATTACHMENT
l340341 SEBP3605
1834513 LINES GP-STEERING Parts scheme
  For full view, you need register

Parts for your R1600G LOAD HAUL DUMP:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0L-0639 [2] BOLT (3/8UNF X 2 1/4)  
2. 8T-4896 [2] WASHER-HARD (3/8)  
3. 119-8763 Y [1] PUMP GP-METERING  
4. 226-0486 [4] HOSE AS  
    (Each Includes)
  122-6896 [1] HOSE (00255 MM )  
  124-1950 [1] COUPLING  
  124-2002 [1] COUPLING  
5. 030-7947 [4] ELBOW  
6. 3J-1907 [4] SEAL-O-RING (11.89MM ID)  
7. 2P-1276 [4] UNION  
8. 5B-3254 [4] NUT-JAM (7/16UNF)  
9. 226-0487 [1] BRACKET AS  
10. 4M-0061 C [4] BOLT-PLT (5/16UNC X 3/4)  
11. 3E-4352 [4] WASHER (5/16PANEL)  
  Y   SEPARATE ILLUSTRATION
  C   INDICATES CHANGE
 

Information:

Operation and Maintenance Manual
Steering and Transmission Lock Control (STIC Steering)
R1600G Load Haul Dump
Transmission Neutral Lock Control (Wheel Steering)
R1600G Load Haul Dump
Transmission Control
R1600G Load Haul Dump
Steering Control
R1600G Load Haul Dump
Steering and Transmission Lock Control (STIC Steering) - Lubricate
R1600G Load Haul Dump
Implement and Steering Lockout (STIC Steering) - Test
R1600G Load Haul Dump
Specifications
Steering Control (Wheel Steering)
R1600G Load Haul Dump Steering System
Limit Switch (STIC Control Lock)
R1600G Load Haul Dump Power Train
Testing and Adjusting
STIC Control Lock - Check and Adjust
R1600G Load Haul Dump Power Train
Limit Switch (STIC Control Lock) - Check and Adjust
R1600G Load Haul Dump Power Train
Limit Switch (STIC Control Lock) - Check and Adjust
R1600G Load Haul Dump Power Train
Steering Time - Check - STIC Steering
R1600G Load Haul Dump Steering System
Service Magazine
A New STIC Control Lock Now Used {3034}
2003/12/29
Correction to Specifications , "STIC Control Lock" {3034}
2003/12/29
Correction to Systems Operation Testing and Adjusting , "Limit Switch (STIC Control Lock) - Check and Adjust" {3034}
2003/12/29
A New STIC Steering Mechanical Lockout is Available {3034}
2004/04/19
New Metering Pump Groups For Steering Control Prevent Oil Leaks {4300, 4301, 4312}
2010/01/27
Update to Operation and Maintenance Manual , "Implement and Steering Lockout (STIC Steering) - Inspect, Test" {3034, 5063}
2014/12/19
Improved Mount Plate for STIC Lockout Lever Now Used on Certain LHD Machines {4343}
Improved Mount Plate for STIC Lockout Lever Now Used on Certain LHD Machines {4343}

Caterpillar Parts SIS Catalog R1600G :

CONTROL GP-STEERING
248-0099 CONTROL GP-STEERING
CONTROL GP-STEERING
240-6933 CONTROL GP-STEERING
BODY GP-VALVE
147-1238 BODY GP-VALVE
VALVE GP-SOLENOID
227-4400 VALVE GP-SOLENOID
VALVE GP-SOLENOID
116-4152 VALVE GP-SOLENOID
VALVE GP-PARKING BRAKE
156-4063 VALVE GP-PARKING BRAKE
LINES GP-SERVICE BRAKE
259-4833 LINES GP-SERVICE BRAKE
LINES GP-SERVICE BRAKE
156-4062 LINES GP-SERVICE BRAKE
CONTROL GP-STEERING
160-0857 CONTROL GP-STEERING
CYLINDER & MTG GP-STEERING
160-1402 CYLINDER & MTG GP-STEERING
CYLINDER & SEAL GP-STEERING
8V-5216 CYLINDER & SEAL GP-STEERING
CYLINDER GP-STEERING
6E-5024 CYLINDER GP-STEERING
LINES GP-REVERSIBLE STEERING
211-8337 LINES GP-REVERSIBLE STEERING
LINES GP-REVERSIBLE STEERING
214-2092 LINES GP-REVERSIBLE STEERING
LINES GP-SECONDARY STEERING
160-1450 LINES GP-SECONDARY STEERING
LINES GP-STEERING
160-1837 LINES GP-STEERING

Truck sale:

Caterpillar R1600G
 
Caterpillar R1600G
- underground mining loader
MADISA
Caterpillar R 1600 G
 
Caterpillar R 1600 G
- underground mining loader
MADISA
Caterpillar R1600G
 
Caterpillar R1600G
- underground mining loader
MADISA
Caterpillar R1600G, Wheel Loaders, Construction
350,000 
Caterpillar R1600G, Wheel Loaders, Construction

PETERSON CAT
Caterpillar R1600G, Construction
86,625 
Caterpillar R1600G, Construction
- underground equipment
TOROMONT CAT
Canada
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.