FUEL SYSTEM
GOVERNOR GPPUMP GP-FUEL TRANSFER
PUMP GP-FUEL INJECTION
FILTER GP-FUEL
PUMP GP-FUEL TRANSFER
TANK GP-FUEL
ELECTRICAL AND STARTING SYSTEM
ALARM GPALTERNATOR GP-CHARGING
BATTERY GP
FUEL SYSTEM
GOVERNOR GP
#SEBP36130040
191-0541: GOVERNOR GP
For full view, you need register
Parts for your 303.5 MINI HYD EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 155-8007 | [1] | LEVER AS | |
| 1A. | 154-1397 | [1] | LEVER | |
| 2. | 154-1396 | [1] | CLIP | |
| 3. | 154-1399 | [1] | WASHER | |
| 4. | 155-8002 | [1] | SPRING | |
| 5. | 153-7983 | [1] | PIN | |
| 6. | 310-7139 | [1] | SPRING | |
| 7. | 445-8964 | [1] | ARM | |
| 8. | 154-1403 | [1] | SEAL-O-RING | |
| 9. | 154-1396 | [1] | CLIP | |
| 10. | 154-1405 | [1] | LEVER | |
| 11. | 155-8009 | [1] | BOLT | |
| 12. | 153-5960 M | [4] | NUT (M6X1-THD) | |
| 13. | 191-0542 | [1] | SHAFT | |
| 14. | 154-1410 | [1] | SEAL-O-RING | |
| 15. | 154-1411 | [1] | CLIP | |
| 16. | 154-1412 | [1] | BRACKET | |
| 17. | 249-7263 M | [2] | BOLT (M6X1X16-MM) | |
| 18. | 154-1414 | [2] | BOLT | |
| 19. | 166-5268 | [1] | LEVER | |
| 20. | 154-1416 | [1] | SPRING | |
| 21. | 154-1408 | [1] | WASHER | |
| 22. | 154-1636 | [2] | NUT | |
| 23. | 154-1637 | [1] | ARM | |
| 24. | 154-1638 | [1] | SEAL-O-RING | |
| 25. | 154-1639 | [1] | CLIP | |
| 26. | 154-1407 | [1] | BOLT | |
| 191-0817 F | [1] | PROTECTION GP-FUEL SYSTEM | ||
| (KIT INCLUDES: 5 NUTS, A WASHER,A CLIP,A CIRCLIP, & AN O-RING) | ||||
| F | NOT SHOWN | |||
| M | METRIC PART | |||
#SEBP36130041
176-7711: PUMP & MTG GP-FUEL TRANSFER
176-7711 PUMP & MTG GP-FUEL TRANSFER
S/N 9TJ1398-UP
PART OF 168-3312, 231-7677 ENGINE AR-PRIMARY
S/N 9TJ1398-UP
PART OF 168-3312, 231-7677 ENGINE AR-PRIMARY
For full view, you need register
Parts for your 303.5 MINI HYD EXCAVATOR:
CATERPILLAR SIS#SEBP36130042
190-3806: PUMP GP-FUEL INJECTION
190-3806 PUMP GP-FUEL INJECTION
S/N 9TJ1-UP
PART OF 168-3312, 231-7677 ENGINE AR-PRIMARY
S/N 9TJ1-UP
PART OF 168-3312, 231-7677 ENGINE AR-PRIMARY
For full view, you need register
Parts for your 303.5 MINI HYD EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 153-5592 M | [2] | NUT (M8X1.25-THD) | |
| 2. | 153-5960 M | [2] | NUT (M6X1-THD) | |
| 3. | 165-2141 M | [2] | BOLT (M8X1.25X20-MM) | |
| 4. | 154-2715 | [2] | WASHER | |
| 5. | 154-2716 | [3] | SEAL | |
| 6. | 252-1446 | [3] | INJECTOR AS-FUEL | |
| (EACH INCLUDES) | ||||
| 6A. | 202-1196 | [1] | WASHER-SPECIAL | |
| 6B. | 205-4731 | [1] | NUT | |
| 7. | 236-4961 B | SHIM (0.2-MM THK) | ||
| 236-4959 AB | SHIM (0.3-MM THK) | |||
| 236-4954 AB | SHIM (0.4-MM THK) | |||
| 236-4952 AB | SHIM (0.5-MM THK) | |||
| 160-7034 AB | SHIM (0.9-MM THK) | |||
| 8. | 183-3353 | [2] | BOLT | |
| 9. | 190-3801 | [1] | LINE | |
| 10. | 190-3803 | [1] | BOLT | |
| 11. | 155-7991 | [1] | LINE AS-FUEL INJECTION (CYLINDER ONE) | |
| 12. | 155-7993 | [1] | LINE AS-FUEL INJECTION (CYLINDER TWO) | |
| 13. | 155-7995 | [1] | LINE AS-FUEL INJECTION (CYLINDER THREE) | |
| 14. | 290-8014 | [4] | CLAMP | |
| 15. | 252-6987 Y | [1] | PUMP GP-FUEL INJECTION | |
| 16. | 351-8829 | [1] | SOLENOID | |
| 17. | 153-6412 | [1] | WASHER | |
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP36130043
252-6987: PUMP GP-FUEL INJECTION
252-6987 PUMP GP-FUEL INJECTION
S/N 9TJ1-UP
PART OF 190-3806 PUMP GP-FUEL INJECTION
S/N 9TJ1-UP
PART OF 190-3806 PUMP GP-FUEL INJECTION
For full view, you need register
Parts for your 303.5 MINI HYD EXCAVATOR:
CATERPILLAR SIS#SEBP36130044
176-9954: PUMP GP-FUEL PRM & PRIM FILTER
176-9954 PUMP GP-FUEL PRM & PRIM FILTER
S/N DCH1-UP
PART OF 158-5725 FILTER & LINES GP-FUEL
S/N DCH1-UP
PART OF 158-5725 FILTER & LINES GP-FUEL
For full view, you need register
Parts for your 303.5 MINI HYD EXCAVATOR:
CATERPILLAR SIS#SEBP36130045
154-2387: PUMP GP-FUEL TRANSFER
For full view, you need register
#SEBP36130046
158-5722: TANK GP-FUEL
For full view, you need register
Parts for your 303.5 MINI HYD EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 172-2109 | [1] | TANK AS-FUEL | |
| 2. | 140-3921 | [1] | CAP | |
| 3. | 5I-4510 | [1] | STRAINER (FUEL TANK) | |
| 4. | 140-3453 | [2] | SEAL | |
| 5. | 143-0269 | [1] | SEAL | |
| 6. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 7. | 8T-4136 M | [4] | BOLT (M10X1.5X25-MM) | |
| 8. | 126-4711 | [1] | VALVE-BALL | |
| 9. | 140-3836 B | [1] | SHIM | |
| 10. | 154-2241 | [1] | GAUGE AS | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#SEBP36130047
163-7703: ALARM GP-TRAVEL
For full view, you need register
Parts for your 303.5 MINI HYD EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5H-6555 | [2] | LOCKWASHER | |
| 2. | 6T-5925 | [2] | SWITCH AS-LIMIT (TRAVEL) | |
| (EACH INCLUDES) | ||||
| 6V-8376 | [3] | SCREW-MACHINE (8-32X0.25-IN) | ||
| 9B-7233 | [3] | LOCKWASHER | ||
| 3. | 147-1940 M | [2] | SCREW-MACHINE (M3X0.5X40-MM) | |
| 4. | 169-5349 | [1] | HARNESS AS-SWITCH | |
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9G-3695 | [2] | PLUG-SEAL | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECPETACLE AS & WEDGE) | ||||
| 2L-8075 | [4] | TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW) | ||
| 5. | 171-2071 | [1] | HARNESS AS-ALARM | |
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9G-3695 | [2] | PLUG-SEAL | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECPETACLE AS & WEDGE) | ||||
| 2L-8075 | [4] | TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW) | ||
| 6. | 161-2539 | [1] | ALARM AS (BACKUP) | |
| 7. | 8T-4171 M | [4] | BOLT (M6X1X12-MM) | |
| 8. | 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 9. | 184-2570 | [1] | PLATE AS | |
| 10. | 7X-2537 M | [2] | BOLT (M8X1.25X35-MM) | |
| 11. | 8T-4224 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 12. | 184-2564 | [2] | PLATE | |
| 13. | 188-0820 | [3] | PLATE | |
| M | METRIC PART | |||
#SEBP36130048
169-1220: ALTERNATOR GP-CHARGING
169-1220 ALTERNATOR GP-CHARGING
S/N DCH1-UP
PART OF 163-6999 INSTALLATION AR-ENGINE
S/N DCH1-UP
PART OF 163-6999 INSTALLATION AR-ENGINE
For full view, you need register
Parts for your 303.5 MINI HYD EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 169-1221 | [1] | V-BELT (WATER PUMP) | |
| 2. | 7C-9465 | [1] | SPACER (11.1X14.3X20-MM THK) | |
| 3. | 144-9952 | [1] | ALTERNATOR GP-CHARGING | |
| 4. | 144-9957 | [1] | BRACKET AS | |
| 5. | 155-5447 | [1] | STRAP | |
| 6. | [1] | SPACER | ||
| 8. | 5P-4116 | [1] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 9. | 6V-7744 M | [1] | LOCKNUT (M10X1.5-THD) | |
| 10. | 7X-2537 M | [2] | BOLT (M8X1.25X35-MM) | |
| 11. | 8T-4121 | [3] | WASHER-HARD (11X21X2.5-MM THK) | |
| 12. | 8T-4189 M | [3] | BOLT (M8X1.25X20-MM) | |
| 13. | 8T-4224 | [5] | WASHER-HARD (8.8X16X2-MM THK) | |
| 14. | 8T-6685 M | [1] | BOLT (M10X1.5X110-MM) | |
| 15. | 8T-7547 M | [1] | BOLT (M8X1.25X30-MM) | |
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP36130049
158-5723: BATTERY & WIRING GP
For full view, you need register
Parts for your 303.5 MINI HYD EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 163-9817 | [1] | HARNESS AS-PANEL | |
| 9W-2035 | [3] | BLOCK-FUSE | ||
| 111-7898 | [2] | CONNECTOR (8-PIN) | ||
| 8N-1546 | [1] | PIN-CONNECTOR (6-GA) | ||
| 8T-8729 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 176-1477 | [1] | PLUG AS (2-PIN) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2274 | [2] | KIT-CONNECTING PLUG (6-PIN) | ||
| 155-2255 | [3] | KIT-CONNECTING PLUG (12-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 9G-3695 | [26] | PLUG-SEAL | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 127-5484 | [1] | RECEPTACLE AS-CONNECTOR (1-PIN) | ||
| 185-1861 | [1] | SEAL-WIRE | ||
| 8T-8730 | [39] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-0844 | [5] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 128-4168 | [2] | TERMINAL AS | ||
| (EACH INCLUDES) | ||||
| 6H-3592 | [1] | TERMINAL-RING (6-GA TO 8-GA, 5/16-IN SCREW) | ||
| 6V-9023 E | TUBE-HEAT SHRINK (12.7-MM DIA)(4-CM) | |||
| 128-4178 | [3] | TERMINAL AS | ||
| (EACH INCLUDES) | ||||
| 2L-8068 | [1] | TERMINAL-RING (10-GA TO 12-GA, 5/16-IN SCREW) | ||
| 5P-6006 D | TUBE-HEAT SHRINK (9.52-MM DIA)(0.1-M) | |||
| 2L-8075 | [2] | TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW) | ||
| 2L-8078 | [1] | TERMINAL-RING (14-GA TO 16-GA, 5/16-IN SCREW) | ||
| 128-4190 | [1] | TERMINAL AS | ||
| 6H-3586 | [1] | TERMINAL-RING (6-GA TO 8-GA, 1/4-IN SCREW) | ||
| 6V-9023 E | TUBE-HEAT SHRINK (12.7-MM DIA)(4-CM) | |||
| 128-4168 | [2] | TERMINAL AS | ||
| (EACH INCLUDES) | ||||
| 6H-3592 | [1] | TERMINAL-RING (6-GA TO 8-GA, 5/16-IN SCREW) | ||
| 6V-9023 E | TUBE-HEAT SHRINK (12.7-MM DIA)(4-CM) | |||
| 9W-2033 | [11] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| 9W-2034 | [3] | TERMINAL-BLADE (10-GA TO 12-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(20-CM) | |||
| 2. | 163-9818 | [1] | HARNESS AS-ENGINE | |
| 107-3134 | [1] | HOUSING-CONNECTOR | ||
| 8T-8729 | [9] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 9X-1054 | [2] | PLUG AS-CONNECTOR (4-PIN) | ||
| 9G-3695 | [4] | PLUG-SEAL | ||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8730 | [2] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 3S-2093 | [1] | STRAP-CABLE | ||
| 2L-8067 | [3] | TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW) | ||
| 2L-8075 | [1] | TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW) | ||
| 128-4190 | [3] | TERMINAL AS | ||
| (EACH INCLUDES) | ||||
| 6H-3586 | [1] | TERMINAL-RING (6-GA TO 8-GA, 1/4-IN SCREW) | ||
| 6V-9023 E | TUBE-HEAT SHRINK (12.7-MM DIA)(4-CM) | |||
| 2L-8065 | [1] | TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW) | ||
| 128-4168 | [1] | TERMINAL AS | ||
| 6H-3592 | [1] | TERMINAL-RING (6-GA TO 8-GA, 5/16-IN SCREW) | ||
| 6V-9023 E | TUBE-HEAT SHRINK (12.7-MM DIA)(4-CM) | |||
| 5P-4571 | [2] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| 107-3135 | [2] | TERMINAL (16-GA TO 20-GA) | ||
| 9X-1055 | [4] | TERMINAL-RECEPTACLE (12-GA) | ||
| 100-5041 | [4] | TERMINAL-RECEPTACLE (18-GA TO 20-GA) | ||
| 3. | 163-9819 | [1] | HARNESS AS-PLATFORM | |
| 8T-8729 | [17] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-0852 | [3] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2270 | [4] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 3E-5519 | [2] | PLUG AS-CONNECTOR (5-PIN) | ||
| 9X-1054 | [2] | PLUG AS-CONNECTOR (4-PIN) | ||
| 100-3320 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 126-5011 | [1] | SEAL-CONNECTOR | ||
| 127-5483 | [1] | PLUG AS-CONNECTOR (1-PIN) | ||
| 7G-7918 | [1] | PLUG-SEAL | ||
| 9G-3695 | [19] | PLUG-SEAL | ||
| 102-8802 | [3] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8N-1517 | [1] | RECEPTACLE AS-CONNECTOR (25-PIN) | ||
| 8T-8730 | [25] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 305-5362 | [2] | TERMINAL AS (18-GA) | ||
| 9X-0196 | [1] | TERMINAL AS (16-GA) | ||
| 2L-8075 | [2] | TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW) | ||
| 128-4190 | [1] | TERMINAL AS | ||
| 6H-3586 | [1] | TERMINAL-RING (6-GA TO 8-GA, 1/4-IN SCREW) | ||
| 6V-9023 E | TUBE-HEAT SHRINK (12.7-MM DIA)(4-CM) | |||
| 2L-8069 | [1] | TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW) | ||
| 2L-8079 | [1] | TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW) | ||
| 9X-1056 | [7] | TERMINAL-RECEPTACLE (14-GA TO 16-GA) | ||
| 100-5041 | [10] | TERMINAL-RECEPTACLE (18-GA TO 20-GA) | ||
| 5P-4571 | [2] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(40-CM) | |||
| 5. | 188-1779 | [1] | CABLE AS-BATTERY (POSITIVE) | |
| 3S-6049 | [1] | TERMINAL AS-BATTERY (POSITIVE) | ||
| 1M-6119 | [1] | BOLT (5/16-18X1.375-IN) | ||
| 1M-6120 | [1] | NUT (5/16-18-THD) | ||
| 159-8049 E | CABLE (00-GA, RED)(168-CM) | |||
| 9X-9825 | [1] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | ||
| 8N-1725 | [1] | COVER AS-TERMINAL (RED) | ||
| 6. | 169-1225 | [1] | CABLE AS (NEGATIVE) | |
| 3S-6050 | [1] | TERMINAL AS-BATTERY (NEGATIVE) | ||
| 1M-6119 | [1] | BOLT (5/16-18X1.375-IN) | ||
| 1M-6120 | [1] | NUT (5/16-18-THD) | ||
| 159-8050 E | CABLE (00-GA, BLACK)(40-CM) | |||
| 1S-7251 | [1] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | ||
| 7N-5274 | [1] | COVER AS-TERMINAL (BLACK) | ||
| 7. | 185-4202 | [1] | CABLE AS | |
| 1S-7251 | [2] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | ||
| 8. | 158-7833 | [1] | WIRE AS-SWITCH (SPEED SELECT) | |
| 9. | 3T-3132 | [1] | SWITCH AS-LIMIT (SPEED SELECT, TRAVEL) | |
| 2H-3922 | [1] | LOCKWASHER | ||
| 6V-8363 | [2] | SCREW (10-32X0.312-IN) | ||
| 6V-8370 | [1] | NUT-HEX (3/4-32-THD) | ||
| 8F-1434 | [2] | LOCKWASHER | ||
| 9X-0199 | [1] | BOOT-SWITCH | ||
| 10. | 185-8105 | [1] | BRACKET AS | |
| 11. | 153-5656 | [1] | BATTERY (12-VOLT, MAINTENANCE FREE) | |
| 12. | 174-7268 | [1] | BRACKET | |
| 13. | 174-7296 | [1] | BRACKET AS | |
| 6V-9632 M | [4] | NUT-WELD (M6X1-THD) | ||
| 14. | 9H-1958 | [1] | CIRCUIT BREAKER GP (20-AMPERE) | |
| 6V-8376 | [2] | SCREW-MACHINE (8-32X0.25-IN) | ||
| 9B-7233 | [2] | LOCKWASHER | ||
| 15. | 9S-0174 | [2] | CIRCUIT BREAKER AS (60-AMPERE)(MAIN) | |
| (EACH INCLUDES) | ||||
| 253-2111 | [2] | LOCKWASHER | ||
| 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 7X-3182 | [2] | BOLT (1/4-28X0.5-IN) | ||
| 0S-1570 | [2] | BOLT (1/4-28X0.625-IN) | ||
| 16. | 8N-0869 | [1] | COVER-TERMINAL (RED) | |
| 17. | 120-0667 | [1] | SENDER-TEMPERATURE (COOLANT) | |
| 18. | 143-2267 Y | [1] | GAUGE GP-CLUSTER | |
| 19. | 7T-0635 | [1] | HORN AS (12-VOLT) | |
| 8C-7581 M | [2] | SCREW-MACHINE (M4X0.7X8-MM) | ||
| 9B-7233 | [2] | LOCKWASHER | ||
| 096-6166 | [1] | WASHER-HARD (4.5X9X1-MM THK) | ||
| 20. | 115-1615 | [1] | RELAY AS (12-VOLT)(LAMP) | |
| 20A. | 115-1615 | [1] | RELAY AS (12-VOLT)(HYDRAULIC) | |
| 20B. | 115-1615 | [1] | RELAY AS (12-VOLT)(START DISABLE) | |
| 20C. | 115-1615 | [1] | RELAY AS (12-VOLT)(BOOM LOWER) | |
| 20D. | 115-1615 | [1] | RELAY AS (12-VOLT)(STARTING AID) | |
| 20E. | 115-1615 | [1] | RELAY AS (12-VOLT)(START) | |
| 21. | 169-1236 | [1] | SENDER AS | |
| 154-7902 | [1] | GASKET | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 22. | 138-4923 | [1] | SHAFT | |
| 23. | 140-3449 | [2] | ROD | |
| 24. | 144-2321 | [1] | PLATE | |
| 25. | 9W-1442 | [9] | FUSE (10-AMPERE) | |
| 26. | 169-1223 | [1] | CLAMP | |
| 27. | 3S-2093 | [22] | STRAP-CABLE | |
| 28. | 5P-5148 | [1] | STRAP-CABLE | |
| 29. | 121-3699 | [1] | SEAL | |
| 30. | 168-7908 | [1] | SWITCH GP-MAGNETIC (12-VOLT)(MAIN POWER RELAY) | |
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 4F-2294 | [2] | NUT-JAM (5/16-24-THD) | ||
| 8T-8730 | [2] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 32. | 4D-7794 | [1] | CLIP | |
| 33. | 4D-8123 | [1] | CLIP | |
| 34. | 4P-7581 | [4] | CLIP (LADDER) | |
| 35. | 4P-8134 | [5] | CLIP (LADDER) | |
| 36. | 8M-2772 | [1] | CLIP (LOOP) | |
| 37. | 6D-4246 | [1] | CLIP (LOOP) | |
| 38. | 8M-2770 | [1] | CLIP (LOOP) | |
| 39. | 9M-8406 | [2] | CLIP (LOOP) | |
| 40. | 144-2317 | [1] | BOOT | |
| 41. | 8T-8799 | [3] | BOOT (RED) | |
| 42. | 139-4972 | [1] | SPACER AS | |
| 43. | 5L-4507 | [4] | SCREW-MACHINE (10-32X0.875-IN) | |
| 44. | 6V-9672 M | [2] | SCREW-MACHINE (M4X0.7X16-MM) | |
| 45. | 6V-9673 M | [5] | SCREW-MACHINE (M5X0.8X12-MM) | |
| 46. | 6V-9674 M | [6] | SCREW-MACHINE (M5X0.8X14-MM) | |
| 47. | 5C-8312 M | [2] | NUT (M4X0.7-THD) | |
| 48. | 5C-2874 M | [6] | NUT (M5X0.8-THD) | |
| 49. | 5C-2890 M | [4] | NUT (M6X1-THD) | |
| 50. | 8T-4171 M | [6] | BOLT (M6X1X12-MM) | |
| 51. | 5C-9553 M | [8] | BOLT (M6X1X16-MM) | |
| 52. | 8C-8451 M | [2] | BOLT (M6X1X40-MM) | |
| 53. | 8T-4200 M | [4] | BOLT (M8X1.25X16-MM) | |
| 54. | 8T-4189 M | [2] | BOLT (M8X1.25X20-MM) | |
| 55. | 8T-4191 M | [6] | BOLT (M10X1.5X16-MM) | |
| 56. | 8T-4137 M | [3] | BOLT (M10X1.5X20-MM) | |
| 57. | 8T-4179 M | [1] | BOLT (M12X1.75X20-MM) | |
| 58. | 8T-4199 M | [3] | BOLT (M8X1.25X12-MM) | |
| 59. | 9X-8256 | [10] | WASHER (6.6X12X2-MM THK) | |
| 60. | 8T-4224 | [9] | WASHER-HARD (8.8X16X2-MM THK) | |
| 61. | 8T-4121 | [10] | WASHER-HARD (11X21X2.5-MM THK) | |
| 62. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 63. | 5P-4115 | [2] | WASHER-HARD (7.2X19X2-MM THK) | |
| 64. | 154-3197 | [1] | SWITCH GP-START (KEY) | |
| 65. | 7I-2673 | [5] | STRAP-CABLE | |
| 66. | 7K-1181 | [6] | STRAP-CABLE | |
| 67. | 4K-8302 | [2] | CLIP (LOOP) | |
| 69. | 6K-8178 | [1] | CLIP | |
| 70. | 9X-8250 | [1] | CLIP | |
| 71. | 6D-4636 | [1] | CLIP (LOOP) | |
| 73. | 109-2350 | [1] | SWITCH AS-ROCKER (WARNING BEACON, POWER RECEP) | |
| 111-7899 | [1] | GASKET | ||
| 74. | 189-3158 | [1] | SUPPRESSOR-ARC | |
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
