BRAKING SYSTEM
AIR DRYER GPBRAKE GP
CONTROL GP
BRAKING SYSTEM
AIR DRYER GP
#SEBP36170580
173-5314: AIR DRYER GP
For full view, you need register
Parts for your 120H MOTOR GRADER:
CATERPILLAR SIS#SEBP36170581
208-0014: AIR DRYER GP
208-0014 AIR DRYER GP -COLD WEATHER OPERATION
S/N CAF1-UP
PART OF 173-5314 AIR DRYER GP
AN ATTACHMENT
S/N CAF1-UP
PART OF 173-5314 AIR DRYER GP
AN ATTACHMENT
For full view, you need register
Parts for your 120H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 0A-3721 | [1] | CLIP | |
| 2. | 2S-3440 | [1] | CLAMP-HOSE | |
| 3. | 5P-4401 | [1] | CONNECTOR-AIR BRAKE | |
| 4. | 5P-4424 | [1] | ELBOW-AIR BRAKE | |
| 5. | 5P-4426 | [3] | ELBOW-AIR BRAKE | |
| 6. | 6V-2610 | [1] | FITTING | |
| 7. | 177-0279 I | [1] | HOSE AS | |
| 8. | 191-3645 | [1] | RESERVOIR | |
| 9. | 208-1512 | [1] | TUBE AS | |
| 10. | 215-3005 Y | [1] | AIR DRYER GP | |
| 11. | 260-9133 | [1] | PLATE | |
| 12. | 260-9194 | [1] | TUBE | |
| 13. | 268-3456 | [1] | TUBE | |
| 14. | 3J-5390 | [1] | PLUG (3/8-18-THD) | |
| 15. | 5P-2566 C | [3] | BOLT (1/2-13X1.5-IN) | |
| 16. | 6K-8178 | [1] | CLIP (LOOP) | |
| 17. | 6P-6641 | [1] | GROMMET | |
| 18. | 7D-0215 | [1] | CONNECTOR-PIPE | |
| 19. | 7D-4903 | [1] | ADAPTER | |
| 20. | 7J-8611 | [1] | ELBOW-PIPE | |
| 21. | 8D-1470 C | [1] | GROMMET | |
| 22. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 23. | 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | |
| 24. | 8T-4223 | [3] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 25. | 8T-4224 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 26. | 8T-7547 M | [2] | BOLT (M8X1.25X30-MM) | |
| 27. | 8I-1362 E | HOSE (100-CM) | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP36170582
215-3005: AIR DRYER GP
For full view, you need register
Parts for your 120H MOTOR GRADER:
CATERPILLAR SIS#SEBP36170583
215-3646: AIR DRYER GP
For full view, you need register
Parts for your 120H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 0A-3721 | [1] | CLIP | |
| 2. | 2H-3940 | [2] | ELBOW | |
| 3. | 5D-7688 I | [1] | HOSE AS | |
| 4. | 5P-4401 | [1] | CONNECTOR-AIR BRAKE | |
| 5. | 5P-4424 | [1] | ELBOW-AIR BRAKE | |
| 6. | 5P-4426 | [1] | ELBOW-AIR BRAKE | |
| 7. | 6V-2610 | [1] | FITTING | |
| 8. | 175-0403 | [1] | TUBE | |
| 9. | 177-0279 I | [1] | HOSE AS | |
| 10. | 191-3645 | [1] | RESERVOIR | |
| 11. | 208-1512 | [1] | TUBE AS | |
| 12. | 215-3005 Y | [1] | AIR DRYER GP | |
| 13. | 5M-6213 | [1] | PLUG-PIPE (1/4-18-THD) | |
| 14. | 6K-8178 | [1] | CLIP (LOOP) | |
| 15. | 6P-6641 | [1] | GROMMET | |
| 16. | 7D-0215 | [1] | CONNECTOR-PIPE | |
| 17. | 7D-4903 | [1] | ADAPTER | |
| 18. | 7J-8611 | [1] | ELBOW-PIPE | |
| 19. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 20. | 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | |
| 21. | 8T-4189 M | [2] | BOLT (M8X1.25X20-MM) | |
| 22. | 8T-4224 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 23. | 8I-1362 E | HOSE (130 CM) | ||
| E | ORDER BY THE CENTIMETER | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP36170584
217-9055: AIR DRYER GP
For full view, you need register
Parts for your 120H MOTOR GRADER:
CATERPILLAR SIS#SEBP36170585
9W-5132: BRAKE GP-PARKING
For full view, you need register
Parts for your 120H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6V-5842 M | [6] | BOLT (M10X1.5X40-MM) | |
| 2. | 6V-5839 | [6] | WASHER (11X21X2.5-MM THK) | |
| 3. | 6Y-3849 | [1] | HUB-CLUTCH | |
| 4. | 9M-4335 | [6] | DOWEL-REACTION | |
| 5. | 5J-1086 | [1] | SEAL-O-RING | |
| 6. | 6Y-3850 | [1] | HOUSING-BRAKE | |
| 7. | 4S-5838 | [1] | RETAINER | |
| 8. | 8T-0372 M | [1] | BOLT (M12X1.75X90-MM) | |
| 9. | 4F-7390 | [1] | SEAL-O-RING | |
| 10. | 1P-7521 | [1] | YOKE | |
| 11. | 203-5957 | [1] | SEAL | |
| 12. | 9W-4431 | [20] | SPRING | |
| 13. | 9W-4430 | [20] | SPRING | |
| 14. | 6V-3668 M | [12] | BOLT (M12X1.75X30-MM) | |
| 15. | 7G-0437 | [6] | PLATE-CLUTCH | |
| 16. | 6Y-5352 | [5] | DISC-FRICTION | |
| 17. | 2J-6274 | [1] | SEAL-O-RING | |
| 18. | 9S-4182 | [1] | PLUG (7/16-20-THD) | |
| 19. | 3J-7354 | [1] | SEAL-O-RING | |
| 20. | 203-5958 | [1] | SEAL | |
| 21. | 9W-4452 | [1] | PISTON | |
| 22. | 9W-4453 | [1] | PISTON | |
| 23. | 4H-9105 | [1] | SEAL-O-RING | |
| 24. | 6Y-3852 | [1] | PLUG | |
| 25. | 9N-6152 | [1] | PLUG | |
| 26. | 2M-9780 | [1] | SEAL-O-RING | |
| 27. | 9X-7743 | [1] | SEAL-LIP TYPE | |
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP36170586
218-2307: BRAKE GP-SERVICE
For full view, you need register
Parts for your 120H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2G-6336 | [4] | HUB-BRAKE | |
| 2. | 2N-2138 | [4] | CUP-BEARING | |
| 3. | 2N-2139 | [4] | CONE-BEARING | |
| 4. | 3S-0303 | [4] | SEAL GP-DUO-CONE | |
| 5. | 5P-4143 | [52] | BOLT-LOCKING (1/2-13X2-IN) | |
| 6. | 6G-0905 | [24] | BOLT (7/16-14X4.37-IN) | |
| 7. | 6Y-7915 | [40] | DISC-FRICTION | |
| 8. | 8D-8791 B | [24] | SHIM (0.007-MM THK)(.007 IN THK) | |
| 9. | 8D-8792 B | [24] | SHIM (0.005-MM THK)(.005 IN THK) | |
| 10. | 8D-8794 | [44] | DISC | |
| 11. | 8D-8805 | [4] | COVER | |
| 12. | 8T-2861 | [8] | BOLT (1/2-13X2.5 IN) | |
| 13. | 8W-0789 | [4] | RETAINER | |
| 14. | 8W-8289 | [4] | SPROCKET | |
| 15. | 9D-3241 | [4] | CUP-BEARING | |
| 16. | 9D-3242 | [4] | CONE-BEARING | |
| 17. | 9D-4029 | [4] | SPACER (3.014X3.75X0.75-IN THK) | |
| 18. | 9D-7085 B | [8] | SHIM (0.02-MM THK)(.02 IN THK) | |
| 19. | 9J-5498 | [24] | SPRING | |
| 20. | 147-3309 | [4] | SPINDLE-WHEEL | |
| 21. | 218-2309 | [4] | PISTON | |
| 22. | 234-0225 | [4] | HOUSING | |
| 23. | 0S-1595 | [12] | BOLT (1/2-13X1.25-IN) | |
| 24. | 3J-5390 | [4] | PLUG (3/8-18-THD) | |
| 25. | 5P-2545 | [8] | SEAL-O-RING | |
| 26. | 5P-8244 | [24] | WASHER-HARD (12X22.5X2.5-MM THK) | |
| 27. | 5P-8245 | [72] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 28. | 6V-0314 | [12] | BOLT-LOCKING (1/2-13X2-IN) | |
| 29. | 8D-8795 | [4] | SEAL-D-RING | |
| 30. | 9D-7972 | [4] | SEAL-D-RING | |
| B | USE AS REQUIRED | |||
#SEBP36170587
160-7753: CONTROL GP-PARKING BRAKE
For full view, you need register
Parts for your 120H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3B-8822 | [1] | ELBOW | |
| 2. | 4S-7529 I | [1] | HOSE AS | |
| 3. | 4S-7606 | [2] | ELBOW | |
| 4. | 5T-8285 | [1] | JUNCTION BLOCK | |
| 5. | 6D-1432 | [1] | VALVE-CHECK (PARKING BRAKE) | |
| 6. | 7D-3963 I | [1] | HOSE AS | |
| 7. | 7X-4736 | [1] | GROMMET | |
| 8. | 8W-8528 | [2] | SLEEVE | |
| 9. | 8X-5160 | [1] | GROMMET | |
| 10. | 112-4834 I | [1] | HOSE AS | |
| 11. | 185-0008 Y | [1] | VALVE GP-SOLENOID (24-VOLT)(PARKING BRAKE) | |
| 12. | 253-4347 C | [1] | VALVE AS-AIR (PARKING BRAKE) | |
| 1H-1023 | [1] | SEAL-O-RING | ||
| 6H-9691 | [1] | SEAL-O-RING | ||
| 13. | 130-5300 | [1] | CLIP | |
| 14. | 3D-8884 | [1] | ELBOW | |
| 15. | 4D-6585 | [1] | ELBOW-PIPE | |
| 16. | 4H-6147 | [1] | CONNECTOR | |
| 17. | 5H-4778 | [2] | ELBOW | |
| 18. | 5K-1094 C | [1] | LOCKWASHER | |
| 19. | 5K-2408 | [2] | FITTING | |
| 20. | 5M-3062 | [1] | BOLT (3/8-16X0.75-IN) | |
| 21. | 5M-6213 | [1] | PLUG-PIPE (1/4-18-THD) | |
| 22. | 6V-8801 | [2] | NUT (3/8-16-THD) | |
| 23. | 8T-2502 | [3] | BOLT (3/8-16X1.125-IN) | |
| 24. | 8T-4896 | [5] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 25. | 174-5907 | [1] | CLIP (LOOP) | |
| 26. | 4S-1962 | [1] | CLIP (LOOP) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP36170588
171-2863: CONTROL GP-SERVICE BRAKE
For full view, you need register
Parts for your 120H MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1B-2578 | [1] | NUT (3/8-16-THD) | |
| 2. | 1F-4622 | [2] | BEARING AS-NEEDLE | |
| 3. | 2D-7325 | [1] | TEE-PIPE | |
| 4. | 2L-3331 | [4] | CONNECTOR-PIPE | |
| 5. | 3S-2713 | [1] | NUT-FULL (3/8-24-THD) | |
| 6. | 3T-0050 | [4] | CLIP | |
| 7. | 5K-9238 | [4] | CONNECTOR | |
| 8. | 5T-8285 | [1] | JUNCTION BLOCK | |
| 9. | 6K-6826 | [4] | ELBOW (45-DEG) | |
| 10. | 6W-5817 | [1] | SPRING | |
| 11. | 7V-0446 | [2] | CLIP | |
| 12. | 8D-8826 | [4] | GUARD | |
| 13. | 8L-6005 | [3] | TEE-PIPE | |
| 14. | 8W-8527 | [16] | SLEEVE | |
| 15. | 8W-8532 | [1] | CLIP | |
| 16. | 8W-8903 | [1] | CLIP | |
| 17. | 8X-2650 Y | [1] | VALVE GP-AIR CONTROL | |
| 18. | 8X-2680 | [1] | BRACKET AS | |
| 19. | 9J-8783 | [1] | SHIM (0.508-MM THK) | |
| 20. | 9S-1302 | [2] | WASHER (27X44.45X2.5-MM THK) | |
| 21. | 9S-7706 | [2] | ELBOW-FLARED | |
| 22. | 9X-8606 | [8] | CLIP | |
| 23. | 110-3326 | [1] | PLATE AS | |
| 3S-0391 | [1] | BOSS (3/8-16-THD) | ||
| 24. | 169-0921 | [1] | ROD END (3/8-24 LH-THD) | |
| 25. | 172-4211 | [1] | SPACER (10.5X22X50.8-MM THK) | |
| 26. | 176-2945 | [2] | FITTING-BULKHEAD | |
| 27. | 177-1713 | [1] | ROD | |
| 28. | 180-4027 | [1] | CAM | |
| 29. | 180-7147 | [1] | LEVER | |
| 30. | 180-9867 | [2] | CLAMP | |
| 31. | 183-4691 | [2] | CLAMP | |
| 32. | 184-6665 | [2] | CLAMP | |
| 33. | 185-1122 | [1] | BRACKET | |
| 34. | 187-0745 | [4] | CLAMP | |
| 35. | 198-5438 | [2] | BLOCK | |
| 36. | 204-8736 | [1] | TUBE AS | |
| 37. | 204-8737 | [1] | TUBE AS | |
| 38. | 204-8738 | [1] | TUBE AS | |
| 39. | 204-8739 | [1] | TUBE AS | |
| 40. | 204-8740 | [1] | TUBE AS | |
| 41. | 204-8741 | [1] | TUBE AS | |
| 42. | 207-4772 I | [2] | HOSE AS | |
| 43. | 207-4773 I | [2] | HOSE AS | |
| 44. | 207-4924 | [1] | PEDAL-BRAKE | |
| 45. | 214-2415 | [1] | BRACKET AS | |
| 46. | 214-2466 | [1] | PLATE AS | |
| 47. | 129-3173 | [1] | BOLT-12 POINT HEAD (3/8-16X1.25-IN) | |
| 48. | 1B-0676 | [1] | PIN | |
| 49. | 1H-7724 | [3] | BUSHING-REDUCER | |
| 50. | 3B-7721 | [1] | BUSHING-REDUCER | |
| 51. | 3K-6060 | [8] | LOCKNUT (3/8-16-THD) | |
| 52. | 3K-8280 | [1] | PIN-CLEVIS | |
| 53. | 4B-6060 | [1] | SETSCREW-SOCKET (1/4-20X0.375-IN) | |
| 54. | 4D-0577 | [1] | ELBOW | |
| 55. | 4D-0582 | [5] | ELBOW | |
| 56. | 4J-3914 | [1] | ELBOW | |
| 57. | 4J-8922 | [1] | ROD END (3/8-24-THD) | |
| 58. | 4L-6454 | [4] | BOLT (3/8-16X1-IN) | |
| 59. | 4M-6425 | [1] | BOLT (5/16-18X1-IN) | |
| 60. | 5C-2890 M | [3] | NUT (M6X1-THD) | |
| 61. | 5H-4778 | [1] | ELBOW | |
| 62. | 5M-3062 | [2] | BOLT (3/8-16X0.75-IN) | |
| 63. | 5M-6213 | [1] | PLUG-PIPE (1/4-18-THD) | |
| 64. | 5P-1075 | [2] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 65. | 6D-9855 I | [1] | HOSE AS | |
| 66. | 6V-4245 | [1] | ELBOW | |
| 67. | 6V-7357 M | [1] | BOLT (M6X1X25-MM) | |
| 68. | 6V-8189 | [3] | NUT (5/16-18-THD) | |
| 69. | 6V-8801 | [4] | NUT (3/8-16-THD) | |
| 70. | 6V-8918 | [2] | BOLT (5/16-18X1.25-IN) | |
| 71. | 242-9245 | [2] | HOSE AS | |
| 72. | 7M-7410 | [6] | PLUG-PIPE | |
| 73. | 8T-2502 | [1] | BOLT (3/8-16X1.125-IN) | |
| 74. | 8T-4121 | [5] | WASHER-HARD (11X21X2.5-MM THK) | |
| 75. | 8T-4137 M | [5] | BOLT (M10X1.5X20-MM) | |
| 76. | 8T-4224 | [5] | WASHER-HARD (8.8X16X2-MM THK) | |
| 77. | 8T-4226 | [1] | WASHER-PLATED (10.5X45X3-MM THK) | |
| 78. | 8T-4896 | [22] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 79. | 8T-5390 | [1] | BOLT (3/8-16X3.5-IN) | |
| 80. | 8T-9056 | [4] | BOLT (3/8-16X1.25-IN) | |
| 81. | 8X-7603 | [2] | HOSE AS | |
| 82. | 8X-8450 | [1] | PLATE | |
| 83. | 8X-8451 | [1] | PLATE | |
| 84. | 9X-8256 | [1] | WASHER (6.6X12X2-MM THK) | |
| 85. | 5P-0767 E | HOSE (60CM) | ||
| E | ORDER BY THE CENTIMETER | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP36170589
207-9269: KIT-AIR INFLATION
207-9269 KIT-AIR INFLATION
S/N CAF1-UP
PART OF 259-5737 CONVERSION AR-MACHINE
AN ATTACHMENT
S/N CAF1-UP
PART OF 259-5737 CONVERSION AR-MACHINE
AN ATTACHMENT
For full view, you need register
