AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

130-9042 CYLINDER GP-STEERING -RH S/N CAF1-UP 57.15-MM (2.25-IN) BORE X 267-MM (10.51-IN) STROKE PART OF 8W-2290 CYLINDER & MTG GP-STEERING 120H


HYDRAULIC SYSTEM
CYLINDER GP
VALVE GP-CONTROL
DRIVE GP
ACCUMULATOR GP
LINES GP-HYDRAULIC

MOTOR GRADER 120H MOTOR GRADER CAF
 120H Motor Grader CAF00001-UP (MACHINE) POWERED BY 3126B Engine SEBP3617 120H CAF   (2001)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP-SIDESHIFT
112-5575 CYLINDER GP-SIDESHIFT
CYLINDER GP-STEERING
130-9041 CYLINDER GP-STEERING
CYLINDER GP-STEERING
130-9042 CYLINDER GP-STEERING
CYLINDER GP-WHEEL LEAN
121-9242 CYLINDER GP-WHEEL LEAN
 

#SEBP36170630
 

130-9042: CYLINDER GP-STEERING

130-9042 CYLINDER GP-STEERING -RH
S/N CAF1-UP
57.15-MM (2.25-IN) BORE X 267-MM (10.51-IN) STROKE
PART OF 8W-2290 CYLINDER & MTG GP-STEERING
i01412276 SEBP3617
1309042 CYLINDER GP-STEERING Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-2388 [1] PISTON  
2. 130-9045 [1] CYLINDER AS (RH)  
  148-2592 [1] BOSS AS  
  1N-5999 [1] PLUG-O-RING  
  7J-0204 [1] SEAL-O-RING  
  [1] CAP AS  
  005-8639 [1] BEARING-ALIGNING  
3. 154-6579 [1] ROD  
4. 167-2186 [1] SEAL AS-BUFFER  
5. 167-2294 [1] SEAL-U-CUP  
6. 226-8202 [1] SEAL-WIPER  
7. 378-2695 M [1] BOLT (M20X2.5X70-MM)  
8. 175-7895 [1] SEAL-O-RING  
9. 162-6448 [2] PLUG AS  
    (EACH INCLUDES)
  1N-5999 [1] PLUG-O-RING  
  7J-0204 [1] SEAL-O-RING  
10. 1U-3998 [1] SEAL AS  
11. 4J-9225 [1] RING-BACKUP  
12. 7H-2423 [1] RING-WEAR  
13. 8T-3282 [1] WASHER-HARD (22X35X3.5-MM THK)  
14. 9T-3727 [1] HEAD  
   
    AVAILABLE REPAIR KIT(S):
  472-8026 [1] KIT-SEAL (CYLINDER)  
    (INCLUDES SEALS & RINGS)
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP36170631
 

121-9242: CYLINDER GP-WHEEL LEAN

121-9242 CYLINDER GP-WHEEL LEAN
S/N CAF1-UP
88.9-MM (3.5-IN) BORE X 149-MM (5.87-IN) STROKE
PART OF 8W-2737 CYLINDER & MTG GP-WHEEL LEAN
i00126065 SEBP3617
1219242 CYLINDER GP-WHEEL LEAN Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 123-1076 [1] CYLINDER AS  
  2G-8631 [1] BUSHING  
2. 173-9683 M [1] BOLT (M30X3.5X90-MM)  
3. 9X-8399 [1] WASHER (33X56X6-MM THK)  
4. 4T-8054 J [1] SEAL AS  
5. 7J-9885 J [1] RING-WEAR  
6. 9T-9040 [1] PISTON  
7. 175-7898 J [1] SEAL-O-RING  
8. 4J-9224 J [1] RING-BACKUP  
9. 6E-4974 [1] HEAD  
10. 121-9245 [1] ROD AS  
  2G-8631 [1] BUSHING  
11. 308-1845 [1] SEAL-WIPER  
12. 356-8331 J [1] SEAL-U-CUP  
13. 289-2935 [1] SEAL AS-BUFFER  
14. 4T-5613 J [1] RING-WEAR  
   
    AVAILABLE REPAIR KIT(S):
  376-9011 J [1] KIT-HYD CYLINDER SEAL  
    (INCLUDES RINGS & SEALS)
    (FOR USE WITH REHS1392)
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP36170632
 

108-4916: DETENT GP-CONTROL VALVE

108-4916 DETENT GP-CONTROL VALVE -PLOW, BULLDOZER LIFT
S/N CAF1-UP
PART OF 107-0547, 6E-3031, 6E-3037 VALVE GP-CONTROL
ALSO AN ATTACHMENT
i00125706 SEBP3617
1084916 DETENT GP-CONTROL VALVE Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [1] RETAINER  
2. [1] RETAINER  
3. [1] SPRING  
4. 5B-9318 [6] BALL  
 

#SEBP36170633
 

130-3535: DETENT GP-CONTROL VALVE

130-3535 DETENT GP-CONTROL VALVE
S/N CAF1-UP
PART OF 128-8647, 130-3110, 130-3111 VALVE GP-CONTROL
AN ATTACHMENT
i00126235 SEBP3617
1303535 DETENT GP-CONTROL VALVE Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-2540 M [2] BOLT (M8X1.25X120-MM)  
2. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
3. 6V-5722 [2] SEAL-O-RING  
4. 4J-7533 [2] SEAL-O-RING  
5. 9S-8001 [2] PLUG  
6. [1] HOUSING  
7. 9S-8006 [1] PLUG (7/8-14-THD)  
8. 2M-9780 [1] SEAL-O-RING  
9. [1] PISTON  
10. [1] STOP  
11. 5B-9318 [6] BALL  
12. [1] RETAINER  
13. [1] RETAINER  
14. [1] SPACER  
15. 2K-8199 [2] SEAL-O-RING  
16. [1] SPRING (INNER)  
17. [1] SPRING (OUTER)  
  M   METRIC PART
 

#SEBP36170634
 

5T-0570: DRIVE GP-CIRCLE

5T-0570 DRIVE GP-CIRCLE
S/N CAF1-UP
PART OF 162-5603 GENERAL AR
i00664354 SEBP3617
5T0570 DRIVE GP-CIRCLE Parts scheme 5T0570 DRIVE GP-CIRCLE Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 105-3196 CY [1] MOTOR GP-GEROTOR (CIRCLE DRIVE)(CIRCLE DRIVE)  
2. 1B-4046 [2] CONE-BEARING  
3. 1B-4038 [2] CUP-BEARING  
4. 1B-5174 [1] PLUG-PIPE  
5. 9D-1142 [1] WORM-CIRCLE DRIVE  
6. 1H-7339 [1] SEAL-O-RING  
7. 9D-1491 [1] COUPLING  
8. 4H-6996 [1] PIN-SPRING  
9. 2G-6695 [1] BRACKET  
10. 7D-8983 B [10] SHIM (0.005-IN THK)  
11. 7D-8984 B [6] SHIM (0.007-IN THK)  
12. 2H-9247 [1] SEAL-O-RING  
13. 6G-5548 [1] SPACER (69.5X89X0.8-MM THK)  
14. 6G-5543 B [6] SHIM (0.13-MM THK)  
15. 5K-5288 [1] SEAL GP-DUO-CONE  
15A. 5K-5129 [2] RING-SEALING  
16. 6G-5544 B [9] SHIM (0.25-MM THK)  
17. 6G-5538 [1] COVER  
18. 6H-1717 [5] BOLT (1/2-13X1.125-IN)  
19. 5P-8245 [19] WASHER-HARD (13.5X25.5X3-MM THK)  
20. 2B-7410 [1] PLUG-PIPE  
21. 8T-0336 [1] FITTING-PRESSURE RELIEF  
22. 5K-8454 [3] BOLT (1/2-13X1.12-IN)  
23. 6G-5534 [1] COVER AS  
  6G-5537 [1] BEARING  
24. 1F-7958 C [4] NUT-FULL (1/2-13-THD)  
25. 5H-4909 [1] SEAL-O-RING  
26. 6G-5539 [1] GASKET  
27. 6G-5547 [1] PLATE  
28. 6G-5533 [1] GEAR-WORM (36-TEETH)  
29. 9X-8887 C [2] BOLT (3/4-10X3-IN)  
30. 7M-2360 [2] WASHER (19.8X41X9.5-MM THK)  
31. 8D-7425 [2] WASHER-THRUST (2.81X4.25X0.12-IN THK)  
32. 6G-5532 [1] SHAFT-DRIVE PINION  
33. 4F-9653 [1] SEAL-O-RING  
34. 5P-8248 [4] WASHER-HARD (20X36.5X3.5-MM THK)  
35. 2J-3506 [4] NUT-FULL (3/4-10-THD)  
36. 8D-7424 [1] SPACER (48X81X6-MM THK)  
37. 8D-7423 [1] WASHER-SPECIAL (81.03X48.41X1.6MM THK)  
38. 1A-1415 [1] NUT (1-7/8-12-THD)  
39. 261-8553 [1] PINION-CIRCLE DRIVE  
40. 6G-1908 [1] HOUSING AS-DRIVE  
40A. 2D-8154 [4] STUD-TAPERLOCK (1/2-13X2.36-IN)  
40B. 8D-7426 [1] BUSHING  
40C. 7D-3504 [4] STUD-TAPERLOCK (3/4-10X3.39-IN)  
  8D-9804 [1] HOUSING-DRIVE  
41. 6G-5542 [2] SPACER (119.2X178X9.3-MM THK)  
42. 0S-1585 [7] BOLT (1/2-13X1.5-IN)  
43. 6Y-7953 [6] DISC-FRICTION (2.87MM .112IN THK)  
44. 2G-0478 [5] PLATE-CLUTCH (1.52MM THK)  
45. 6G-6122 [1] SPRING-DISC  
46. 5S-7379 [4] BOLT (3/8-16X0.875-IN)  
47. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP36170635
 

166-3336: LINES GP-ACCUMULATOR

166-3336 LINES GP-ACCUMULATOR
S/N CAF1-UP
PART OF 166-3337, 221-2961 ACCUMULATOR AR-BLADE CUSHION
AN ATTACHMENT
i01680380 SEBP3617
1663336 LINES GP-ACCUMULATOR Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9D-0953 [1] SPACER (0.406X0.75X0.88-IN THK)  
2. 108-0706 I [1] HOSE AS  
3. 112-2240 Y [2] MANIFOLD GP-CONTROL (BLADE CUSHION)  
4. 134-0744 I [1] HOSE AS  
5. 134-0746 I [1] HOSE AS  
6. 151-9849 I [1] HOSE AS  
7. 171-6466 [2] UNION AS  
    (EACH INCLUDES)
  5P-9810 [1] UNION  
  3D-2824 [2] SEAL-O-RING  
8. 148-8328 [2] CONNECTOR AS  
    (EACH INCLUDES)
  6V-8633 [1] CONNECTOR  
  3D-2824 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
9. 148-8370 [1] ELBOW AS  
  6V-9851 [1] ELBOW  
  6V-8398 [1] SEAL-O-RING  
10. 148-8444 [2] TEE AS-SWIVEL  
    (EACH INCLUDES)
  6V-9837 [1] TEE-SWIVEL  
  6V-8398 [2] SEAL-O-RING  
11. 6D-4244 [2] CLIP (LOOP)  
12. 7X-0289 [1] BOLT (3/8-16X1.875-IN)  
13. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

#SEBP36170636
 

114-0025: LINES GP-HYDRAULIC

114-0025 LINES GP-HYDRAULIC -BULLDOZER LIFT, PLOW, LH
S/N CAF1-UP
1-CIRCUIT
AN ATTACHMENT
i00125863 SEBP3617
1140025 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 164-5605 [1] CONNECTOR AS  
  8T-0076 [1] CONNECTOR  
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
2. 100-4336 [1] CLIP (LOOP)  
3. 114-0027 I [2] HOSE AS  
4. 148-8318 [1] CONNECTOR AS  
  6V-8634 [1] CONNECTOR  
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP36170637
 

155-4077: LINES GP-HYDRAULIC

155-4077 LINES GP-HYDRAULIC -BULLDOZER LIFT, PLOW, LH
S/N CAF1-UP
AN ATTACHMENT
i01596405 SEBP3617
1554077 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 114-0026 I [2] HOSE AS  
2. 148-8318 [1] CONNECTOR AS  
  6V-8634 [1] CONNECTOR  
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
3. 164-5605 [1] CONNECTOR AS  
  8T-0076 [1] CONNECTOR  
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP36170638
 

159-4730: LINES GP-HYDRAULIC

159-4730 LINES GP-HYDRAULIC -LH
S/N CAF1-606
4 CIRCUITS
PART OF 162-5603 GENERAL AR
i01673964 SEBP3617
1594730 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2A-7081 [1] GUIDE AS-HOSE  
2. 2B-0941 [3] SPACER (10.5X19X19-MM THK)  
3. 2G-5493 [1] CLAMP  
4. 4J-5468 [6] CLAMP  
5. 5D-2645 [3] CLAMP  
6. 5T-9986 I [1] HOSE AS  
7. 7W-5672 [1] PIPE  
8. 8W-4193 I [1] HOSE AS  
9. 8W-4194 I [1] HOSE AS  
10. 9D-0953 [4] SPACER (0.406X0.75X0.88-IN THK)  
11. 9R-1183 I [1] HOSE AS  
12. 107-8143 I [2] HOSE AS  
13. 107-8144 I [2] HOSE AS  
14. 107-8149 I [2] HOSE AS  
15. 107-8150 I [1] HOSE AS  
16. 108-1610 [4] CLAMP  
17. 134-0747 I [1] HOSE AS  
18. 135-0451 [1] PLATE  
19. 135-0452 [2] PLATE  
20. 164-5605 [1] CONNECTOR AS  
  8T-0076 [1] CONNECTOR  
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
21. 164-5608 [2] CONNECTOR AS  
    (EACH INCLUDES)
  8T-1687 [1] CONNECTOR  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
22. 173-1011 Y [1] SWIVEL GP (CIRCLE DRIVE)  
23. 148-8318 [8] CONNECTOR AS  
    (EACH INCLUDES)
  6V-8634 [1] CONNECTOR  
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
24. 148-8340 [1] CONNECTOR AS  
  6V-8639 [1] CONNECTOR  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
25. 148-8358 [2] ELBOW AS  
    (EACH INCLUDES)
  6V-8624 [1] ELBOW  
  2M-9780 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
26. 148-8363 [6] ELBOW AS  
    (EACH INCLUDES)
  6V-9876 [1] ELBOW  
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
27. 148-8364 [1] ELBOW AS  
  6V-8625 [1] ELBOW  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
28. 148-8374 [3] ELBOW AS  
    (EACH INCLUDES)
  6V-8723 [1] ELBOW  
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
29. 1S-0994 [8] CLIP (LOOP)  
30. 2H-9889 [1] BOLT (3/8-16X2.375-IN)  
31. 3B-4628 [2] PIN-COTTER  
32. 5S-7379 [7] BOLT (3/8-16X0.875-IN)  
33. 7X-0288 [3] BOLT (3/8-16X1.625-IN)  
34. 6D-4244 [2] CLIP (LOOP)  
35. 6V-8801 [6] NUT (3/8-16-THD)  
36. 8D-9092 [1] PIN  
37. 8T-2501 [2] BOLT (3/8-16X2-IN)  
38. 8T-2502 [2] BOLT (3/8-16X1.125-IN)  
39. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
40. 8T-4896 [20] WASHER-HARD (10.2X18.5X2.5-MM THK)  
41. 8T-4994 [2] WASHER-HARD (20X36.5X3.5-MM THK)  
42. 8T-7008 [1] BOLT (3/8-16X3-IN)  
43. 8T-9389 [4] BOLT (1/2-13X2.75-IN)  
44. 5P-5931 BD SEAL  
45. 8T-1296 B [4] WASHER (10.5X19X3.5-MM THK)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

#SEBP36170639
 

159-4730: LINES GP-HYDRAULIC

159-4730 LINES GP-HYDRAULIC -LH
S/N CAF607-UP
4 CIRCUITS
PART OF 162-5603 GENERAL AR
i02505137 SEBP3617
1594730 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2A-7081 [1] GUIDE AS-HOSE  
2. 2B-0941 [3] SPACER (10.5X19X19-MM THK)  
3. 2G-5493 [1] CLAMP  
4. 4J-5468 [6] CLAMP  
5. 5D-2645 [3] CLAMP  
6. 5T-9986 I [1] HOSE AS  
7. 7W-5672 [1] PIPE  
8. 8W-4193 I [1] HOSE AS  
9. 8W-4194 I [1] HOSE AS  
10. 9D-0953 [4] SPACER (0.406X0.75X0.88-IN THK)  
11. 9R-1183 I [1] HOSE AS  
12. 107-8143 I [2] HOSE AS  
13. 107-8144 I [2] HOSE AS  
14. 107-8149 I [2] HOSE AS  
15. 107-8150 I [1] HOSE AS  
16. 108-1610 [4] CLAMP  
17. 134-0747 I [1] HOSE AS  
18. 135-0451 [1] PLATE  
19. 135-0452 [2] PLATE  
20. 164-5605 [1] CONNECTOR AS  
  8T-0076 [1] CONNECTOR  
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
21. 164-5608 [2] CONNECTOR AS  
    (EACH INCLUDES)
  8T-1687 [1] CONNECTOR  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
22. 260-6502 CY [1] SWIVEL GP (CIRCLE DRIVE)(HYDRAULIC LINES)  
23. 148-8318 [8] CONNECTOR AS  
    (EACH INCLUDES)
  6V-8634 [1] CONNECTOR  
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
24. 148-8340 [1] CONNECTOR AS  
  6V-8639 [1] CONNECTOR  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
25. 148-8358 [2] ELBOW AS  
    (EACH INCLUDES)
  6V-8624 [1] ELBOW  
  2M-9780 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
26. 148-8363 [6] ELBOW AS  
    (EACH INCLUDES)
  6V-9876 [1] ELBOW  
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
27. 148-8364 [1] ELBOW AS  
  6V-8625 [1] ELBOW  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
28. 148-8374 [3] ELBOW AS  
    (EACH INCLUDES)
  6V-8723 [1] ELBOW  
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
29. 1S-0994 [8] CLIP (LOOP)  
30. 2H-9889 [1] BOLT (3/8-16X2.375-IN)  
31. 3B-4628 [2] PIN-COTTER  
32. 5S-7379 [7] BOLT (3/8-16X0.875-IN)  
33. 7X-0288 [3] BOLT (3/8-16X1.625-IN)  
34. 6D-4244 [2] CLIP (LOOP)  
35. 6V-8801 [6] NUT (3/8-16-THD)  
36. 8D-9092 [1] PIN  
37. 8T-2501 [2] BOLT (3/8-16X2-IN)  
38. 8T-2502 [2] BOLT (3/8-16X1.125-IN)  
39. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
40. 8T-4896 [20] WASHER-HARD (10.2X18.5X2.5-MM THK)  
41. 8T-4994 [2] WASHER-HARD (20X36.5X3.5-MM THK)  
42. 8T-7008 [1] BOLT (3/8-16X3-IN)  
43. 8T-4648 CM [4] BOLT (M12X1.75X70-MM)  
44. 5P-5931 D SEAL (0.1-M)  
45. 8T-1296 B [4] WASHER (10.5X19X3.5-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 120H :

CYLINDER GP-STEERING
130-9041 CYLINDER GP-STEERING
CYLINDER GP-SIDESHIFT
112-5575 CYLINDER GP-SIDESHIFT
CYLINDER GP-SCARIFIER
165-2510 CYLINDER GP-SCARIFIER
CYLINDER GP-LIFT
132-4926 CYLINDER GP-LIFT
CYLINDER GP-HYDRAULIC
6E-4724 CYLINDER GP-HYDRAULIC
CYLINDER GP-CENTERSHIFT
6E-1754 CYLINDER GP-CENTERSHIFT
CYLINDER GP-BLADE TIP
131-7191 CYLINDER GP-BLADE TIP
CYLINDER GP-ARTICULATION
198-8305 CYLINDER GP-ARTICULATION
CYLINDER GP-WHEEL LEAN
121-9242 CYLINDER GP-WHEEL LEAN
DETENT GP-CONTROL VALVE
108-4916 DETENT GP-CONTROL VALVE
DETENT GP-CONTROL VALVE
130-3535 DETENT GP-CONTROL VALVE
DRIVE GP-CIRCLE
5T-0570 DRIVE GP-CIRCLE
LINES GP-ACCUMULATOR
166-3336 LINES GP-ACCUMULATOR
LINES GP-HYDRAULIC
114-0025 LINES GP-HYDRAULIC
LINES GP-HYDRAULIC
155-4077 LINES GP-HYDRAULIC
LINES GP-HYDRAULIC
159-4730 LINES GP-HYDRAULIC

Truck sale:

Caterpillar 120H
 
Caterpillar 120H
- motor graders
CAVPOWER
 
105,000 
Caterpillar 120H, motor graders, Construction


 
105,000 
Caterpillar 120H, motor graders, Construction


Caterpillar 120H, motor graders, Construction
105,000 
Caterpillar 120H, motor graders, Construction

RING POWER CORP.
Caterpillar 120H, motorgrader mijnbouw, Bouw
 
Caterpillar 120H, motorgrader mijnbouw, Bouw

CGT - COMPAGNIA GENERALE TRATTORI
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.