AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

173-1011 SWIVEL GP S/N CBC1-248 PART OF 159-4730 LINES GP-HYDRAULIC 135H MOTOR GRADER


HYDRAULIC SYSTEM
SWIVEL GP
TANK GP
VALVE & LINKAGE GP

MOTOR GRADER 135H MOTOR GRADER CBC
 135H Motor Grader CBC00001-UP (MACHINE) POWERED BY 3126B Engine SEBP3618 135H CBC   (2001)

HYDRAULIC SYSTEM

SWIVEL GP
SWIVEL GP
173-1011 SWIVEL GP
SWIVEL GP
260-6502 SWIVEL GP
SWIVEL GP
260-6502 SWIVEL GP
 

#SEBP36180610
 

173-1011: SWIVEL GP

173-1011 SWIVEL GP
S/N CBC1-248
PART OF 159-4730 LINES GP-HYDRAULIC
i01450843 SEBP3618
1731011 SWIVEL GP Parts scheme
  For full view, you need register

Parts for your 135H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 173-1009 [1] RETAINER  
2. 8J-2331 [7] SEAL  
3. 2H-3928 [7] SEAL-O-RING  
4. 173-1007 [2] SEAL  
5. 9T-5603 [1] BODY  
6. 4J-9964 [2] SEAL  
7. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
8. 5P-2566 [6] BOLT (1/2-13X1.5-IN)  
9. 1P-3700 [4] SEAL-RECTANGULAR  
10. 223-0580 [1] COVER  
11. 173-1008 [1] ROTOR  
12. 5J-1246 B [6] SHIM (0.13-MM THK)  
  B   USE AS REQUIRED
 

#SEBP36180611
 

260-6502: SWIVEL GP

260-6502 SWIVEL GP -CIRCLE DRIVE
S/N CBC249-UP
PART OF 159-4730 LINES GP-HYDRAULIC
Type 1
i02322216 SEBP3618
2606502 SWIVEL GP Parts scheme
  For full view, you need register

Parts for your 135H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5J-1246 B [6] SHIM (0.13-MM THK)  
2. 8J-2331 [7] SEAL  
3. 173-1008 [1] ROTOR  
4. 173-1009 [1] RETAINER  
5. 223-0580 [1] COVER  
7. 260-6501 [1] BODY  
8. 173-1007 [2] SEAL  
9. 1P-3700 [4] SEAL-RECTANGULAR  
10. 2H-3928 [7] SEAL-O-RING  
11. 4J-9964 [2] SEAL  
12. 5P-2566 [6] BOLT (1/2-13X1.5-IN)  
13. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
  B   USE AS REQUIRED
 

#SEBP36180612
 

260-6502: SWIVEL GP

260-6502 SWIVEL GP -CIRCLE DRIVE
S/N CBC249-UP
PART OF 159-4730 LINES GP-HYDRAULIC
Type 2
i06627839 SEBP3618
2606502 SWIVEL GP Parts scheme
  For full view, you need register

Parts for your 135H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5J-1246 B [6] SHIM (0.13-MM THK)  
2. 8J-2331 [7] SEAL  
3. 454-3032 [1] ROTOR  
4. 173-1009 [1] RETAINER  
5. 5P-2566 C [2] BOLT (1/2-13X1.5-IN)  
6. 454-2957 [1] BODY  
7. 148-8395 C [4] PLUG AS  
    (EACH INCLUDES)
  9S-8005 [1] PLUG (3/4-16-THD)  
  3K-0360 [1] SEAL-O-RING  
8. 173-1007 [2] SEAL  
9. 2H-3928 [7] SEAL-O-RING  
10. 4J-9964 [2] SEAL  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP36180613
 

207-2410: TANK & FILTER GP-HYDRAULIC

207-2410 TANK & FILTER GP-HYDRAULIC
S/N CBC1-UP
PART OF 207-2409 TANK & MTG GP-HYDRAULIC
i01679073 SEBP3618
2072410 TANK & FILTER GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 135H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4B-2913 [1] PIN-CLEVIS  
2. 1R-0774 [1] FILTER ELEMENT AS-OIL (ADVANCED EFFICIENCY)  
    -OR-
  4T-3134 [1] FILTER ELEMENT AS-OIL (FIRE RESISTANT FLUID)  
    -OR-
  139-1536 [1] FILTER ELEMENT AS-OIL (ULTRA HIGH EFFICIENCY)  
3. 2D-4202 [1] PLATE  
4. 3F-1547 [1] SEAL-O-RING  
6. 4M-6921 [1] WASHER-SPRING  
7. 5D-1911 [1] COVER-HYDRAULIC CAP  
8. 226-2871 [1] ROD  
9. 7H-1447 [1] CAP-FILLER (HYDRAULIC OIL)  
10. 9J-1979 [1] RETAINER AS  
13. 9J-3047 [1] STRAINER  
14. 9M-7394 [1] LEVER (HYDRAULIC TANK FILL)  
15. 207-2411 [1] TANK AS-HYDRAULIC  
16. 226-2870 [1] CAP AS (HYDRAULIC TANK)  
17. 217-2661 [1] GAUGE-SIGHT (HYDRAULIC OIL)  
  5J-2974 [4] SEAL-O-RING  
  114-4231 [2] BOLT-MOUNTING  
18. 086-0507 [1] PIN  
19. 141-9661 [1] SPACER (20X128X6-MM THK)  
20. 1L-5072 [1] DOWEL  
21. 2J-7761 [1] RING-RETAINING  
22. 3K-6060 [1] LOCKNUT (3/8-16-THD)  
23. 2S-5100 [1] VALVE-MANUAL  
24. 3G-0361 [1] GASKET  
26. 7D-1195 [1] SEAL-O-RING  
27. 8T-2275 [1] BALL  
28. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
29. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
30. 9H-6454 [1] GASKET  
31. 3B-4610 [1] PIN-COTTER  
  M   METRIC PART
 

#SEBP36180614
 

207-2409: TANK & MTG GP-HYDRAULIC

207-2409 TANK & MTG GP-HYDRAULIC
S/N CBC1-UP
PART OF 162-5604 GENERAL AR
i01674807 SEBP3618
2072409 TANK & MTG GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 135H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 246-2641 [1] PADLOCK GP (HYDRAULIC TANK FILL)  
  5P-8500 [2] KEY  
2. 207-2410 Y [1] TANK & FILTER GP-HYDRAULIC  
3. 7X-0325 [4] BOLT (1/2-13X2.5-IN)  
4. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP36180615
 

112-5499: VALVE & LINKAGE GP

112-5499 VALVE & LINKAGE GP -5-BANK, RH, LH
S/N CBC1-UP
PART OF 184-7303 CONTROL AR-HYDRAULIC
AN ATTACHMENT
i00125779 SEBP3618
1125499 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 135H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8X-5499 [2] RETAINER  
2. 101-2457 [2] LEVER  
3. 8D-5634 [2] LEVER  
4. 4L-6459 [1] BOLT (3/8-16X2.5-IN)  
5. 8W-0456 [1] SHAFT  
6. 8X-4276 [10] ROD  
  6V-8186 [20] NUT-FULL (5/16-24-THD)  
  7H-3641 [20] END-ROD (5/16-24-THD)  
7. 8D-5633 [2] LEVER  
8. 101-2458 [2] LEVER  
9. 137-4515 [2] BUSHING  
10. 8D-5640 [12] BEARING  
11. 8D-5636 B [4] SHIM (0.254-MM THK)  
12. 8D-5637 B [4] SHIM (0.762-MM THK)  
13. 6L-1962 [10] NUT-JAM (3/8-24-THD)  
14. 8T-9043 [20] BOLT (5/16-18X0.875-IN)  
15. 3F-9556 [20] LOCKWASHER  
16. 9B-7237 [1] BOLT (3/8-16X1.25-IN)  
17. 8D-5641 [10] BEARING  
18. 2G-6757 [1] KNOB-BLADE LIFT  
19. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
20. 2G-6749 [1] KNOB-SIDESHIFT  
21. 2G-6747 [1] KNOB-BLADE TIP  
22. 8D-5632 [2] LEVER  
23. 2G-6751 [1] KNOB-CIRCLE DRIVE  
24. 2G-6748 [1] KNOB-BLADE LIFT  
25. 2G-6756 [1] KNOB-WHEEL LEAN  
26. 2G-6752 [1] KNOB-ARTICULATION  
27. 2G-6755 [1] KNOB-CENTERSHIFT  
28. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
29. 9M-1853 [6] MOUNTING  
30. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
31. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
32. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
33. 104-7429 [2] PLATE  
34. 137-4516 [1] SHAFT  
35. 2G-6740 [1] KNOB-RIPPER  
36. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
37. 6V-8188 [2] NUT (1/2-13-THD)  
38. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
39. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
40. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
41. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
42. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
43. 104-8671 Y [1] VALVE GP-BANK 5 (RH)  
44. 104-8645 Y [1] VALVE GP-BANK 5 (LH)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36180616
 

124-0311: VALVE & LINKAGE GP

124-0311 VALVE & LINKAGE GP -5-BANK, RH; 4-BANK, LH
S/N CBC1-UP
AN ATTACHMENT
i01477348 SEBP3618
1240311 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 135H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 104-8671 Y [1] VALVE GP-BANK 5 (RH)  
2. 6E-3038 Y [1] VALVE GP-BANK 4 (LH)  
3. 8X-5499 [2] RETAINER  
4. 101-2457 [1] LEVER  
5. 8D-5634 [2] LEVER  
6. 8X-4276 [9] ROD  
  6V-8186 [18] NUT-FULL (5/16-24-THD)  
  7H-3641 [18] END-ROD (5/16-24-THD)  
7. 8D-5633 [2] LEVER  
8. 101-2458 [2] LEVER  
9. 137-4515 [2] BUSHING  
10. 8D-5640 [11] BEARING  
11. 8D-5636 B [4] SHIM (0.254-MM THK)  
12. 8D-5637 B [4] SHIM (0.762-MM THK)  
13. 6L-1962 [9] NUT-JAM (3/8-24-THD)  
14. 8T-9043 [18] BOLT (5/16-18X0.875-IN)  
15. 3F-9556 [18] LOCKWASHER  
16. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
17. 8D-5641 [9] BEARING  
18. 2G-6757 [1] KNOB-BLADE LIFT  
19. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
20. 2G-6749 [1] KNOB-SIDESHIFT  
21. 2G-6747 [1] KNOB-BLADE TIP  
22. 8D-5632 [2] LEVER  
23. 2G-6751 [1] KNOB-CIRCLE DRIVE  
24. 2G-6748 [1] KNOB-BLADE LIFT  
25. 2G-6756 [1] KNOB-WHEEL LEAN  
26. 2G-6752 [1] KNOB-ARTICULATION  
27. 2G-6755 [1] KNOB-CENTERSHIFT  
28. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
29. 9M-1853 [6] MOUNTING  
30. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
31. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
32. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
33. 104-7429 [2] PLATE  
34. 137-4516 [1] SHAFT  
35. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
36. 6V-8188 [2] NUT (1/2-13-THD)  
37. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
38. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
39. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
40. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
41. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36180617
 

153-7964: VALVE & LINKAGE GP

153-7964 VALVE & LINKAGE GP -6-BANK, RH, LH
S/N CBC1-UP
PART OF 184-7315 CONTROL AR-HYDRAULIC
AN ATTACHMENT
i01044451 SEBP3618
1537964 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 135H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2G-6740 [1] KNOB-RIPPER  
2. 2G-6747 [1] KNOB-BLADE TIP  
3. 2G-6748 [1] KNOB-BLADE LIFT (RH)  
4. 2G-6749 [1] KNOB-SIDESHIFT  
5. 2G-6751 [1] KNOB-CIRCLE DRIVE  
6. 2G-6752 [1] KNOB-ARTICULATION  
7. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
8. 2G-6755 [1] KNOB-CENTERSHIFT  
9. 2G-6756 [1] KNOB-WHEEL LEAN  
10. 2G-6757 [1] KNOB-BLADE LIFT (LH)  
11. 2G-7107 [1] KNOB-WING LIFT  
12. 2G-7108 [1] KNOB-WING TILT  
13. 3F-9556 [24] LOCKWASHER  
14. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
15. 6L-1962 [12] NUT-JAM (3/8-24-THD)  
16. 7H-3641 [12] END-ROD (5/16-24-THD)  
17. 8D-5632 [2] LEVER  
18. 8D-5633 [2] LEVER  
19. 8D-5634 [2] LEVER  
20. 8D-5636 B [4] SHIM (0.254-MM THK)  
21. 8D-5637 B [4] SHIM (0.762-MM THK)  
22. 8D-5640 [14] BEARING  
23. 8D-5641 [12] BEARING  
24. 8L-8598 [12] ROD END  
25. 8W-0456 [3] SHAFT  
26. 8X-5499 [2] RETAINER  
27. 9M-1853 [6] MOUNTING  
28. 101-2457 [2] LEVER  
29. 101-2458 [2] LEVER  
30. 103-1597 [2] LEVER  
31. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
32. 104-7429 [2] PLATE  
  104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
34. 137-4515 [2] BUSHING  
35. 137-4516 [1] SHAFT  
36. 146-0705 [12] ROD  
37. 153-8910 Y [1] VALVE GP-BANK 6 (LH)  
38. 153-8911 Y [1] VALVE GP-BANK 6 (RH)  
39. 4L-6459 [1] BOLT (3/8-16X2.5-IN)  
40. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
41. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
42. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
43. 6V-8186 [12] NUT-FULL (5/16-24-THD)  
44. 6V-8188 [2] NUT (1/2-13-THD)  
45. 7X-0291 [1] BOLT (3/8-16X3.75-IN)  
46. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
47. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
48. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
49. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
50. 8T-9043 [24] BOLT (5/16-18X0.875-IN)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36180618
 

153-7966: VALVE & LINKAGE GP

153-7966 VALVE & LINKAGE GP -6-BANK, RH; 7-BANK, LH
S/N CBC1-UP
PART OF 184-7317 CONTROL AR-HYDRAULIC
AN ATTACHMENT
i01044446 SEBP3618
1537966 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 135H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2G-6740 [1] KNOB-RIPPER  
2. 2G-6747 [1] KNOB-BLADE TIP  
3. 2G-6748 [1] KNOB-BLADE LIFT (RH)  
4. 2G-6749 [1] KNOB-SIDESHIFT  
5. 2G-6751 [1] KNOB-CIRCLE DRIVE  
6. 2G-6752 [1] KNOB-ARTICULATION  
7. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
8. 2G-6755 [1] KNOB-CENTERSHIFT  
9. 2G-6756 [1] KNOB-WHEEL LEAN  
10. 2G-6757 [1] KNOB-BLADE LIFT (LH)  
11. 2G-7107 [1] KNOB-WING LIFT  
12. 2G-7108 [1] KNOB-WING TILT  
13. 3F-9556 [26] LOCKWASHER  
14. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
15. 6L-1962 [13] NUT-JAM (3/8-24-THD)  
16. 7H-3641 [13] END-ROD (5/16-24-THD)  
17. 8D-5632 [2] LEVER  
18. 8D-5633 [2] LEVER  
19. 8D-5634 [2] LEVER  
20. 8D-5636 B [4] SHIM (0.254-MM THK)  
21. 8D-5637 B [4] SHIM (0.762-MM THK)  
22. 8D-5640 [15] BEARING  
23. 8D-5641 [13] BEARING  
24. 8L-8598 [13] ROD END  
25. 8W-0456 [4] SHAFT  
26. 8X-5499 [2] RETAINER  
27. 9M-1853 [6] MOUNTING  
28. 101-2457 [2] LEVER  
29. 101-2458 [3] LEVER  
30. 103-1597 [2] LEVER  
31. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
32. 104-7429 [2] PLATE  
33. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
34. 117-0472 [1] KNOB (DOZER ANGLE, SNOW PLOW)  
35. 137-4515 [2] BUSHING  
36. 137-4517 [1] SHAFT  
37. 146-0705 [13] ROD  
38. 153-8911 Y [1] VALVE GP-BANK 6 (RH)  
39. 153-8912 Y [1] VALVE GP-BANK 7 (LH)  
40. 4L-6459 [1] BOLT (3/8-16X2.5-IN)  
41. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
42. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
43. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
44. 6V-8186 [13] NUT-FULL (5/16-24-THD)  
45. 6V-8188 [2] NUT (1/2-13-THD)  
46. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
47. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
48. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
49. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
50. 8T-9043 [26] BOLT (5/16-18X0.875-IN)  
51. 9B-7237 [1] BOLT (3/8-16X1.25-IN)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36180619
 

250-0421: VALVE & LINKAGE GP

250-0421 VALVE & LINKAGE GP -4-BANK, RH, LH
S/N CBC1-UP
AN ATTACHMENT
i02343232 SEBP3618
2500421 VALVE & LINKAGE GP Parts scheme 2500421 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 135H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3F-9556 [16] LOCKWASHER  
2. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
3. 6L-1962 [8] NUT-JAM (3/8-24-THD)  
4. 8D-5632 [1] LEVER (BLADE LIFT, RH)  
4A. 8D-5632 [1] LEVER (CIRCLE DRIVE)  
5. 8D-5633 [1] LEVER (WHEEL LEAN)  
5A. 8D-5633 [1] LEVER (SIDESHIFT)  
6. 8D-5634 [1] LEVER (CENTERSHIFT)  
6A. 8D-5634 [1] LEVER (BLADE LIFT, LH)  
7. 8D-5636 B [4] SHIM (0.254-MM THK)  
8. 8D-5637 B [4] SHIM (0.762-MM THK)  
9. 8D-5640 [10] BEARING  
10. 8D-5641 [8] BEARING  
11. 8X-4277 [8] ROD AS  
    (EACH INCLUDES)
  146-0705 [1] ROD  
  6V-8186 [1] NUT-FULL (5/16-24-THD)  
  7H-3641 [1] END-ROD (5/16-24-THD)  
  8L-8598 [1] ROD END  
12. 8X-5498 [2] RETAINER  
13. 9M-1853 [6] MOUNTING  
14. 101-2457 [1] LEVER (ARTICULATION)  
15. 101-2458 [1] LEVER (BLADE TIP)  
16. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
17. 104-7429 [2] PLATE  
18. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
19. 137-4515 [2] BUSHING  
20. 137-4516 [1] SHAFT  
21. 164-5608 [2] CONNECTOR AS  
    (EACH INCLUDES)
  8T-1687 [1] CONNECTOR  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
22. 244-2584 [1] TUBE AS  
23. 244-2588 [1] TUBE AS  
24. 244-2592 [1] TUBE AS  
25. 244-2596 [1] TUBE AS  
26. 250-0543 Y [1] VALVE GP-BANK 4 (LH)  
27. 250-0544 Y [1] VALVE GP-BANK 4 (RH)  
28. 148-8318 [2] CONNECTOR AS  
    (EACH INCLUDES)
  6V-8634 [1] CONNECTOR  
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
29. 153-1818 [1] ELBOW  
30. 206-5123 [4] TEE AS  
    (EACH INCLUDES)
  206-5122 [1] TEE  
  6V-8397 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
31. 2G-6747 [1] KNOB-BLADE TIP  
32. 2G-6748 [1] KNOB-BLADE LIFT (RH)  
33. 2G-6749 [1] KNOB-SIDESHIFT  
34. 2G-6751 [1] KNOB-CIRCLE DRIVE  
35. 2G-6752 [1] KNOB-ARTICULATION  
36. 2G-6755 [1] KNOB-CENTERSHIFT  
37. 2G-6756 [1] KNOB-WHEEL LEAN  
38. 2G-6757 [1] KNOB-BLADE LIFT (LH)  
39. 3J-1907 [4] SEAL-O-RING  
40. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
41. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
42. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
43. 6V-8188 [2] NUT (1/2-13-THD)  
44. 6V-8397 [8] SEAL-O-RING  
45. 6V-9836 [2] TEE-SWIVEL  
46. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
47. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
48. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
49. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
50. 8T-9041 [3] CONNECTOR  
51. 8T-9043 [16] BOLT (5/16-18X0.875-IN)  
52. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 135H :

SWASHPLATE GP
169-3290 SWASHPLATE GP
188-1055 STEERING AR-SECONDARY
SHAFT GP-PUMP DRIVE
178-9582 SHAFT GP-PUMP DRIVE
ROTATING GP-PUMP
6E-6571 ROTATING GP-PUMP
ROTATING GP-PUMP
194-9453 ROTATING GP-PUMP
ROTATING GP-PUMP
100-3412 ROTATING GP-PUMP
PUMP GP-PISTON
200-1934 PUMP GP-PISTON
PUMP GP-PISTON
169-4883 PUMP GP-PISTON
SWIVEL GP
260-6502 SWIVEL GP
SWIVEL GP
260-6502 SWIVEL GP
TANK & FILTER GP-HYDRAULIC
207-2410 TANK & FILTER GP-HYDRAULIC
TANK & MTG GP-HYDRAULIC
207-2409 TANK & MTG GP-HYDRAULIC
VALVE & LINKAGE GP
112-5499 VALVE & LINKAGE GP
VALVE & LINKAGE GP
124-0311 VALVE & LINKAGE GP
VALVE & LINKAGE GP
153-7964 VALVE & LINKAGE GP
VALVE & LINKAGE GP
153-7966 VALVE & LINKAGE GP

Truck sale:

CATERPILLAR 135H 1998
 
CATERPILLAR 135H 1998
- MOTOR GRADERS
TRACTOR & EQUIPMENT CO
- Billings - Montana United States
1995 CAT 135H
USD $56,000 
1995 CAT 135H

GMW Equipment
Hidalgo, Texas
1995 CAT 135H
USD $56,000 
1995 CAT 135H

GMW Equipment
Hidalgo, Texas
1995 CAT 135H
USD $56,000 
1995 CAT 135H

GMW Equipment
Hidalgo, Texas
1997 CAT 135H
USD $45,500 
1997 CAT 135H

Brown Equipment Co.
Ocala, Florida
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.