AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

LEXION 460 COMBINE 3HZ00001-UP (MACHINE) POWERED BY 3126B Engine FUEL SYSTEM Caterpillar SIS



COMBINE 465 COMBINE 3HZ
 LEXION 460 COMBINE 3HZ00001-UP (MACHINE) POWERED BY 3126B Engine SEBP3619 465 3HZ   (1998)

Parts group 465:

  For full view, you need register
FUEL SYSTEM
CONTROL GP-FUEL INJECTION
CONTROL GP-FUEL INJECTION
105-1695 CONTROL GP-FUEL INJECTION
105-1695 CONTROL GP-FUEL INJECTION
S/N 6JK584-UP
PART OF 145-8411 ENGINE AR-CORE
GOVERNOR GP
DRIVE GP-GOV & TRANSFER PUMP
7E-8794 DRIVE GP-GOV & TRANSFER PUMP
7E-8794 DRIVE GP-GOV & TRANSFER PUMP
S/N 6JK584-UP
PART OF 145-6606 GOVERNOR GP-UNIT INJECTOR
146-9397 GOVERNOR GP
146-9397 GOVERNOR GP
S/N 6JK584-UP
PART OF 145-8411 ENGINE AR-CORE
GOVERNOR GP-UNIT INJECTOR
145-6606 GOVERNOR GP-UNIT INJECTOR
145-6606 GOVERNOR GP-UNIT INJECTOR
S/N 6JK584-UP
PART OF 145-6613 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
145-6613 GOVERNOR GP-UNIT INJECTOR
145-6613 GOVERNOR GP-UNIT INJECTOR
S/N 6JK584-UP
PART OF 146-9397 GOVERNOR GP
KIT-FUEL SYSTEM PARTS
KIT-INJECTOR
242-1539 KIT-INJECTOR
242-1539 KIT-INJECTOR -FUEL
S/N 6541-UP
KIT CONTAINS SEALS NEEDED TO REINSTALL ONE INJECTOR INTO CYLINDER.
FOR USE WITH @@@@@208-2850@@@@@
390-9331 KIT-INJECTOR
390-9331 KIT-INJECTOR
S/N 9FW1-UP; 9TW1-UP
SINGLE FUEL INJECTOR
FOR USE WITH @@@@@145-8410@@@@@
LINES GP-FUEL
LINES GP-FUEL FILTER
146-9395 LINES GP-FUEL FILTER
146-9395 LINES GP-FUEL FILTER
S/N 6JK584-UP
PART OF 145-8410 ENGINE AR
LINES GP-FUEL FILTER
205-9434 LINES GP-FUEL FILTER
205-9434 LINES GP-FUEL FILTER
S/N 5GG1-2898
PART OF 208-2850 ENGINE AR-COMPLETE
LINES GP-FUEL INJECTION
INJECTOR GP-FUEL
178-0199 INJECTOR GP-FUEL
178-0199 INJECTOR GP-FUEL
S/N 5GG1-UP
PART OF 178-0198 PUMP GP-UNIT INJECTION
KIT-INJECTOR
242-1539 KIT-INJECTOR
242-1539 KIT-INJECTOR -FUEL
S/N 6541-UP
KIT CONTAINS SEALS NEEDED TO REINSTALL ONE INJECTOR INTO CYLINDER.
FOR USE WITH @@@@@208-2850@@@@@
390-9331 KIT-INJECTOR
390-9331 KIT-INJECTOR
S/N 9FW1-UP; 9TW1-UP
SINGLE FUEL INJECTOR
FOR USE WITH @@@@@145-8410@@@@@
LINES GP-FUEL RATIO CONTROL
LINES GP-FUEL RATIO CONTROL
101-4562 LINES GP-FUEL RATIO CONTROL
101-4562 LINES GP-FUEL RATIO CONTROL
S/N 6JK584-UP
PART OF 145-8411 ENGINE AR-CORE
LINES GP-GOVERNOR OIL
LINES GP-GOVERNOR OIL
135-1716 LINES GP-GOVERNOR OIL
135-1716 LINES GP-GOVERNOR OIL
S/N 6JK584-UP
PART OF 146-9397 GOVERNOR GP
NOZZLE GP-UNIT INJECTOR
FASTENER GP-FUEL INJ PUMP
7W-4812 FASTENER GP-FUEL INJ PUMP
7W-4812 FASTENER GP-FUEL INJ PUMP
S/N 6JK584-UP
PART OF 146-9397 GOVERNOR GP
KIT-INJECTOR
242-1539 KIT-INJECTOR
242-1539 KIT-INJECTOR -FUEL
S/N 6541-UP
KIT CONTAINS SEALS NEEDED TO REINSTALL ONE INJECTOR INTO CYLINDER.
FOR USE WITH @@@@@208-2850@@@@@
390-9331 KIT-INJECTOR
390-9331 KIT-INJECTOR
S/N 9FW1-UP; 9TW1-UP
SINGLE FUEL INJECTOR
FOR USE WITH @@@@@145-8410@@@@@
PUMP GP-FUEL INJECTION
INJECTOR GP-FUEL
178-0199 INJECTOR GP-FUEL
178-0199 INJECTOR GP-FUEL
S/N 5GG1-UP
PART OF 178-0198 PUMP GP-UNIT INJECTION
KIT-INJECTOR
242-1539 KIT-INJECTOR
242-1539 KIT-INJECTOR -FUEL
S/N 6541-UP
KIT CONTAINS SEALS NEEDED TO REINSTALL ONE INJECTOR INTO CYLINDER.
FOR USE WITH @@@@@208-2850@@@@@
390-9331 KIT-INJECTOR
390-9331 KIT-INJECTOR
S/N 9FW1-UP; 9TW1-UP
SINGLE FUEL INJECTOR
FOR USE WITH @@@@@145-8410@@@@@
PUMP GP-FUEL INJECTION
7E-7607 PUMP GP-FUEL INJECTION
7E-7607 PUMP GP-FUEL INJECTION
S/N 6JK584-2640
PART OF 145-8411 ENGINE AR-CORE
PUMP GP-FUEL INJECTION
7E-7607 PUMP GP-FUEL INJECTION
7E-7607 PUMP GP-FUEL INJECTION
S/N 6JK1353-UP
PART OF 145-8411 ENGINE AR-CORE
PUMP GP-UNIT INJECTION
178-0198 PUMP GP-UNIT INJECTION
178-0198 PUMP GP-UNIT INJECTION
S/N 5GG1-UP
PART OF 212-3654 ENGINE AR-CORE
PUMP GP-UNIT INJECTOR HYD
162-9608 PUMP GP-UNIT INJECTOR HYD
162-9608 PUMP GP-UNIT INJECTOR HYD
S/N 5GG1-UP
PART OF 205-4194 PUMP GP-UNIT INJECTOR HYD
Type 1
PUMP GP-UNIT INJECTOR HYD
162-9608 PUMP GP-UNIT INJECTOR HYD
162-9608 PUMP GP-UNIT INJECTOR HYD
S/N 5GG1-UP
PART OF 205-4194 PUMP GP-UNIT INJECTOR HYD
Type 2
PUMP GP-UNIT INJECTOR HYD
205-4194 PUMP GP-UNIT INJECTOR HYD
205-4194 PUMP GP-UNIT INJECTOR HYD
S/N 5GG1-UP
PART OF 212-3654 ENGINE AR-CORE
Type 1
PUMP GP-UNIT INJECTOR HYD
205-4194 PUMP GP-UNIT INJECTOR HYD
205-4194 PUMP GP-UNIT INJECTOR HYD
S/N 5GG1-UP
PART OF 212-3654 ENGINE AR-CORE
Type 2
PUMP GP-FUEL PRIMING
PUMP GP-FUEL PRIMING
205-9430 PUMP GP-FUEL PRIMING
205-9430 PUMP GP-FUEL PRIMING
S/N 5GG1-UP
PART OF 205-9434 LINES GP-FUEL FILTER
PUMP GP-FUEL TRANSFER
DRIVE GP-GOV & TRANSFER PUMP
7E-8794 DRIVE GP-GOV & TRANSFER PUMP
7E-8794 DRIVE GP-GOV & TRANSFER PUMP
S/N 6JK584-UP
PART OF 145-6606 GOVERNOR GP-UNIT INJECTOR
PUMP GP-UNIT INJECTOR HYD
PUMP GP-UNIT INJECTOR HYD
162-9608 PUMP GP-UNIT INJECTOR HYD
162-9608 PUMP GP-UNIT INJECTOR HYD
S/N 5GG1-UP
PART OF 205-4194 PUMP GP-UNIT INJECTOR HYD
Type 1
PUMP GP-UNIT INJECTOR HYD
162-9608 PUMP GP-UNIT INJECTOR HYD
162-9608 PUMP GP-UNIT INJECTOR HYD
S/N 5GG1-UP
PART OF 205-4194 PUMP GP-UNIT INJECTOR HYD
Type 2
PUMP GP-UNIT INJECTOR HYD
205-4194 PUMP GP-UNIT INJECTOR HYD
205-4194 PUMP GP-UNIT INJECTOR HYD
S/N 5GG1-UP
PART OF 212-3654 ENGINE AR-CORE
Type 1
PUMP GP-UNIT INJECTOR HYD
205-4194 PUMP GP-UNIT INJECTOR HYD
205-4194 PUMP GP-UNIT INJECTOR HYD
S/N 5GG1-UP
PART OF 212-3654 ENGINE AR-CORE
Type 2
REGULATOR GP-FUEL PRESSURE
REGULATOR GP-FUEL PRESSURE
198-1897 REGULATOR GP-FUEL PRESSURE
198-1897 REGULATOR GP-FUEL PRESSURE
S/N 5GG1-UP
PART OF 205-9434 LINES GP-FUEL FILTER
REGULATOR GP-FUEL PRESSURE
229-8872 REGULATOR GP-FUEL PRESSURE
229-8872 REGULATOR GP-FUEL PRESSURE
S/N 5GG1-UP
PART OF 198-1897 REGULATOR GP-FUEL PRESSURE
VALVE GP-RELIEF
VALVE GP-FUEL RELIEF
141-8288 VALVE GP-FUEL RELIEF
141-8288 VALVE GP-FUEL RELIEF
S/N 6JK584-UP
PART OF 146-9395 LINES GP-FUEL FILTER

Information:

(For parts list, see above)

Service Magazine
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Special Instruction
Inspection and Modification of the 102-7459 Fuel Injection Control Linkage and the 4P-9048 Fuel Injection Control Linkage {1298}
Inspection and Modification of the 102-7459 Fuel Injection Control Linkage and the 4P-9048 Fuel Injection Control Linkage {1298}
Technical Information Bulletin
Loose Rivet In Rack Control Assembly
Loose Rivet In Rack Control Assembly
Disassembly and Assembly
Fuel Injection Control Linkage - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Fuel Injection Control Linkage - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
Check The Fuel Injection Control Linkage For A Loose Rivet {1298}
2000/05/15
Systems Operation
Fuel Ratio Control (Types V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors
Testing and Adjusting
Fuel Ratio Control - Adjust
3114, 3116, and 3126 Engines
Service Magazine
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR CORRECTING AN IDLE PROBLEM ON CERTAIN LEXION 450, 460, 465, AND 470 COMBINES EQUIPPED WITH 3126 ENGINES
PRODUCT SUPPORT PROGRAM FOR CORRECTING AN IDLE PROBLEM ON CERTAIN LEXION 450, 460, 465, AND 470 COMBINES EQUIPPED WITH 3126 ENGINES
Service Letter-Australia
Service Letter-CFEL
Service Letter-Americas
Service Letter-China
Service Letter-Asia
Service Letter-APD
Engine News
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1250, 1261}
2012/08/21
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1260}
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1260}
Special Instruction
Installation of Fuel/Water Separator{1260, 1263}
Installation of Fuel/Water Separator{1260, 1263}
Managing Engine Oil Service Intervals for Equipment Operating at High Altitudes{1261, 1308, 1348}
Managing Engine Oil Service Intervals for Equipment Operating at High Altitudes{1261, 1308, 1348}
Tool Operating Manual
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Disassembly and Assembly
Fuel Filter and Base - Remove and Install
Lexion 450, Lexion 460, Lexion 465 andLexion 470 Combines Engine Supplement
Fuel Priming Pump and Primary Fuel Filter - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Fuel Filter Base - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
New Caterpillar High Efficiency Fuel Filters With STAY CLEAN VALVES® Replace All Standard Fuel Filters In February Of 1999 {1261}
1999/04/12
The Proper Procedure to Enter Claims in SIMSi for Plugged /Restricted Fuel Filters and Water Separators on All Machines {1260, 1261, 1262, 1263}
2011/03/21
New Primary Fuel Filters are Available {1260, 1261}
2008/07/14
Special Instruction
The Proper Procedures for Troubleshooting Mechanical Unit Injectors (MUI){1251, 1264, 1280, 1288, 1290}
The Proper Procedures for Troubleshooting Mechanical Unit Injectors (MUI){1251, 1264, 1280, 1288, 1290}
Tool Operating Manual
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Special Instruction
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Using the 127-3458 Sleeve Replacement Tool Group{1290}
The Proper Procedures for Troubleshooting Mechanical Unit Injectors (MUI){1251, 1264, 1280, 1288, 1290}
The Proper Procedures for Troubleshooting Mechanical Unit Injectors (MUI){1251, 1264, 1280, 1288, 1290}
Technical Information Bulletin
Loose Rivet In Rack Control Assembly
Loose Rivet In Rack Control Assembly
Specifications
Governor Identification - Introduction
3114, 3116 and 3126 MUI Engine Governors
Governor (Type I)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type II)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type IV)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI)
3114, 3116 and 3126 MUI Engine Governors
Specification
3114, 3116 and 3126 MUI Engine Governors
Governor Performance Data
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII)
3114, 3116 and 3126 MUI Engine Governors
Systems Operation
Governor Speed Circuit
3114, 3116 and 3126 MUI Engine Governors
Governor Limiting Circuit (Types I, II, III, and IV)
3114, 3116 and 3126 MUI Engine Governors
Governor Limiting Circuit (Types V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors
Fuel Ratio Control (Types I and IV)
3114, 3116 and 3126 MUI Engine Governors
Governor Servo (Types I, III, IV, V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors
Dashpot (Types I, III, IV, V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors
Governor Bias Spring (Most Types IV, V, and VI)
3114, 3116 and 3126 MUI Engine Governors
Governor Bumper Spring (Some Type IV)
3114, 3116 and 3126 MUI Engine Governors
Dual Horsepower (Type VI)
3114, 3116 and 3126 MUI Engine Governors
Dual Horsepower (Type VII)
3114, 3116 and 3126 MUI Engine Governors
Torque Limiter Device (Some Type V)
3114, 3116 and 3126 MUI Engine Governors
Testing and Adjusting
Prepare Calibration Bench for Test Procedure
3114, 3116 and 3126 MUI Engine Governors
Installation of Governor on 1U7326 Governor Calibration Bench
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Setting the Governor Load Stop Dimension for More Than 9.00 mm
3114, 3116 and 3126 MUI Engine Governors
Governor (Types I, II, IV, and V) - Check
3114, 3116 and 3126 MUI Engine Governors
Throttle Lever Orientation (Types IV, V, VI, VII, and Some III) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Types I, II, and Some III) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Governor (Types IV and Some III) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Throttle Lever (Types IV, V, VI, VII, and Some III) - Remove
3114, 3116 and 3126 MUI Engine Governors
Throttle Lever (Types IV, V, VI, VII, and Some III) - Install
3114, 3116 and 3126 MUI Engine Governors
Governor - Adjust
3114, 3116, and 3126 Engines
Disassembly and Assembly
Governor (Type I) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type I) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type IV) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type IV) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type II) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type II) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Governor - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Improvement Provides Better Sealing For Unit Injectors {1290}
1997/09/01
Lower O-Ring Seal Removed From Mechanical Fuel Injector Group{1290}
1998/03/23
New Fuel Shutoff Solenoids With Improved Durability Available {1259}
1999/03/22
New 173-1530 Injector Seating Tool Group Available {0710,1290}
1999/09/13
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A FUEL SYSTEM DAMPER ON CERTAIN 450, 460, 465, AND 470 LEXION COMBINES
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A FUEL SYSTEM DAMPER ON CERTAIN 450, 460, 465, AND 470 LEXION COMBINES
Service Letter-Australia
Service Letter-CFEL
Technical Information Bulletin
The Fuel Lines On The Pressure Relief Valve May Be Reversed
The Fuel Lines On The Pressure Relief Valve May Be Reversed
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A FUEL SYSTEM DAMPER ON CERTAIN 450, 460, 465, AND 470 LEXION COMBINES
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A FUEL SYSTEM DAMPER ON CERTAIN 450, 460, 465, AND 470 LEXION COMBINES
Service Letter-Asia
Service Letter-APD
Service Magazine
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Mechanical Unit Fuel Injector Groups Spill Shield Changed {1290}
1997/06/09
Improvement Provides Better Sealing For Unit Injectors {1290}
1997/09/01
Lower O-Ring Seal Removed From Mechanical Fuel Injector Group{1290}
1998/03/23
Use 170-9227 Reamer Shims To Aid In Reaming Engine Injector Sleeves {1254}
1999/03/08
New Caterpillar High Efficiency Fuel Filters With STAY CLEAN VALVES&reg; Replace All Standard Fuel Filters In February Of 1999 {1261}
1999/04/12
Use 131-8362 Reamer Head For Reaming Seat In Injector Sleeves {1125,0703}
1999/08/17
New 173-1530 Injector Seating Tool Group Available {0710,1290}
1999/09/13
Special Instruction
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 223-2454 Tool Group on 3114, 3116, and 3126 Engines with Mechanical Unit Injectors (MUI){0374, 0599, 0701, 0706, 1251, 1252, 1254}
Using the 223-2454 Tool Group on 3114, 3116, and 3126 Engines with Mechanical Unit Injectors (MUI){0374, 0599, 0701, 0706, 1251, 1252, 1254}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
Service Magazine
Mechanical Unit Fuel Injector Groups Spill Shield Changed {1290}
1997/06/09
Improvement Provides Better Sealing For Unit Injectors {1290}
1997/09/01
Lower O-Ring Seal Removed From Mechanical Fuel Injector Group{1290}
1998/03/23
Use 170-9227 Reamer Shims To Aid In Reaming Engine Injector Sleeves {1254}
1999/03/08
Use 131-8362 Reamer Head For Reaming Seat In Injector Sleeves {1125,0703}
1999/08/17
New 173-1530 Injector Seating Tool Group Available {0710,1290}
1999/09/13
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Calibration Fluid for Fuel Nozzle Test Equipment Is Available {1252, 1254}
2008/12/01
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Specifications
Governor Performance Data
3114, 3116 and 3126 MUI Engine Governors
Service Magazine
Lubricity Limit Added To Preferred Distillate Fuel Recommendation {1280,7568}
1997/08/18
New 173-1530 Injector Seating Tool Group Available {0710,1290}
1999/09/13
Special Instruction
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Tool Operating Manual
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Service Magazine
Mechanical Unit Fuel Injector Groups Spill Shield Changed {1290}
1997/06/09
Improvement Provides Better Sealing For Unit Injectors {1290}
1997/09/01
Lower O-Ring Seal Removed From Mechanical Fuel Injector Group{1290}
1998/03/23
Use 170-9227 Reamer Shims To Aid In Reaming Engine Injector Sleeves {1254}
1999/03/08
New 173-1530 Injector Seating Tool Group Available {0710,1290}
1999/09/13
Special Instruction
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Using the 223-2454 Tool Group on 3114, 3116, and 3126 Engines with Mechanical Unit Injectors (MUI){0374, 0599, 0701, 0706, 1251, 1252, 1254}
Using the 223-2454 Tool Group on 3114, 3116, and 3126 Engines with Mechanical Unit Injectors (MUI){0374, 0599, 0701, 0706, 1251, 1252, 1254}
Service Magazine
Mechanical Unit Fuel Injector Groups Spill Shield Changed {1290}
1997/06/09
Improvement Provides Better Sealing For Unit Injectors {1290}
1997/09/01
Lower O-Ring Seal Removed From Mechanical Fuel Injector Group{1290}
1998/03/23
Use 170-9227 Reamer Shims To Aid In Reaming Engine Injector Sleeves {1254}
1999/03/08
New 173-1530 Injector Seating Tool Group Available {0710,1290}
1999/09/13
Improvements have been made to Remanufactured Fuel Injectors {1251, 1254, 1290, 1713}
2008/04/07
Truck Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/01
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
2008/11/01
Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Special Instruction
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
The Proper Procedures for Troubleshooting Mechanical Unit Injectors (MUI){1251, 1264, 1280, 1288, 1290}
The Proper Procedures for Troubleshooting Mechanical Unit Injectors (MUI){1251, 1264, 1280, 1288, 1290}
Removal and Installation of Unit Injectors on 3114, 3116, and 3126 MUI Engines{1251, 1290}
Removal and Installation of Unit Injectors on 3114, 3116, and 3126 MUI Engines{1251, 1290}
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Using the 223-2454 Tool Group on 3114, 3116, and 3126 Engines with Mechanical Unit Injectors (MUI){0374, 0599, 0701, 0706, 1251, 1252, 1254}
Using the 223-2454 Tool Group on 3114, 3116, and 3126 Engines with Mechanical Unit Injectors (MUI){0374, 0599, 0701, 0706, 1251, 1252, 1254}
Reuse And Salvage Guidelines
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Information Release Memo
REMANUFACTURED FUEL INJECTORS FOR VARIOUS 3126B AND 3126E ENGINE APPLICATIONS
REMANUFACTURED FUEL INJECTORS FOR VARIOUS 3126B AND 3126E ENGINE APPLICATIONS
REMANUFACTURED FUEL INJECTORS FOR VARIOUS 3126B AND 3126E ENGINE APPLICATIONS
REMANUFACTURED FUEL INJECTORS FOR VARIOUS 3126B AND 3126E ENGINE APPLICATIONS
Testing and Adjusting
Fuel Timing Dimension - Adjust
3114, 3116, and 3126 Engines
Unit Injector - Adjust
3114, 3116, and 3126 Engines
Unit Injector Synchronization - Adjust
3114, 3116, and 3126 Engines
Disassembly and Assembly
Unit Injector - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Unit Injector - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Mechanical Unit Fuel Injector Groups Spill Shield Changed {1290}
1997/06/09
Improvement Provides Better Sealing For Unit Injectors {1290}
1997/09/01
Lower O-Ring Seal Removed From Mechanical Fuel Injector Group{1290}
1998/03/23
Use 170-9227 Reamer Shims To Aid In Reaming Engine Injector Sleeves {1254}
1999/03/08
New Fuel Shutoff Solenoids With Improved Durability Available {1259}
1999/03/22
Use 131-8362 Reamer Head For Reaming Seat In Injector Sleeves {1125,0703}
1999/08/17
New 173-1530 Injector Seating Tool Group Available {0710,1290}
1999/09/13
Pull the Injector Sleeve with a 139-0692 Sleeve Jaw {0706, 1713}
2000/04/17
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Improvements have been made to Remanufactured Fuel Injectors {1251, 1254, 1290, 1713}
2008/04/07
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Injectors Should Not Be Tested for Proper Operation Prior to Being Installed Into the Engine {1251, 1290}
2009/02/23
Truck Engine News
An Improved Hand Operated Fuel Priming Pump Is Available {1258}
2012/11/26
Engine News
An Improved Hand Operated Fuel Priming Pump Is Available {1258}
2012/10/08
Special Instruction
Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System{1258}
Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System{1258}
Tool Operating Manual
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting
Fuel System - Prime
3114, 3116, and 3126 Engines
Disassembly and Assembly
Fuel Priming Pump and Primary Fuel Filter - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
New Caterpillar High Efficiency Fuel Filters With STAY CLEAN VALVES&reg; Replace All Standard Fuel Filters In February Of 1999 {1261}
1999/04/12
Special Instruction, REHS1037 , "Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System" has been Revised {1258}
2004/03/29
An Improved Hand Operated Fuel Priming Pump Is Available {1258}
2012/10/04
Special Instruction
The Proper Procedures for Troubleshooting Mechanical Unit Injectors (MUI){1251, 1264, 1280, 1288, 1290}
The Proper Procedures for Troubleshooting Mechanical Unit Injectors (MUI){1251, 1264, 1280, 1288, 1290}
Tool Operating Manual
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Systems Operation
Fuel Transfer Pump
3114, 3116 and 3126 MUI Engine Governors
Testing and Adjusting
Fuel System Pressure - Test
3114, 3116, and 3126 Engines
Disassembly and Assembly
Fuel Transfer Pump - Remove and Install
Lexion 450, Lexion 460, Lexion 465 andLexion 470 Combines Engine Supplement
Fuel Transfer Pump - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Fuel Transfer Pump - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Mechanical Unit Fuel Injector Groups Spill Shield Changed {1290}
1997/06/09
Lower O-Ring Seal Removed From Mechanical Fuel Injector Group{1290}
1998/03/23
New Fuel Shutoff Solenoids With Improved Durability Available {1259}
1999/03/22
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Special Instruction
Installation of Fuel/Water Separator{1260, 1263}
Installation of Fuel/Water Separator{1260, 1263}
Disassembly and Assembly
Water Separator - Remove and Install
Lexion 450, Lexion 460, Lexion 465 andLexion 470 Combines Engine Supplement
Service Magazine
New Caterpillar High Efficiency Fuel Filters With STAY CLEAN VALVES&reg; Replace All Standard Fuel Filters In February Of 1999 {1261}
1999/04/12
The Proper Procedure to Enter Claims in SIMSi for Plugged /Restricted Fuel Filters and Water Separators on All Machines {1260, 1261, 1262, 1263}
2011/03/21
Systems Operation
Fuel Shutoff Solenoid
3114, 3116 and 3126 MUI Engine Governors
Disassembly and Assembly
Fuel Shutoff Solenoid - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
New Fuel Shutoff Solenoids With Improved Durability Available {1259}
1999/03/22
Tool Operating Manual
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
Disassembly and Assembly
Fuel Tank - Remove and Install
Lexion 450, Lexion 460, Lexion 465 andLexion 470 Combines Engine Supplement
Service Magazine
Updated Fuel Tank Caps Are Now Available {1273}
2004/03/15
Updated Fuel Tank Caps are Now Available {1273}
2014/12/03
Welding On Fuel And Hydraulic Tanks {0353, 0679, 1273, 5056, 7000}
2005/12/19
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
Using the Cat 179-0710 Burn Rate Fuel Flow Measurement System {0374, 0599, 0706, 1250, 1280}
Using the Cat 179-0710 Burn Rate Fuel Flow Measurement System {0374, 0599, 0706, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Using the 223-2454 Tool Group on 3114, 3116, and 3126 Engines with Mechanical Unit Injectors (MUI){0374, 0599, 0701, 0706, 1251, 1252, 1254}
Using the 223-2454 Tool Group on 3114, 3116, and 3126 Engines with Mechanical Unit Injectors (MUI){0374, 0599, 0701, 0706, 1251, 1252, 1254}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709}
131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Reuse And Salvage Guidelines
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Service Magazine
Use 170-9227 Reamer Shims To Aid In Reaming Engine Injector Sleeves {1254}
1999/03/08
New 173-1530 Injector Seating Tool Group Available {0710,1290}
1999/09/13
Pull the Injector Sleeve with a 139-0692 Sleeve Jaw {0706, 1713}
2000/04/17
170-9227 Shims Will Control Injector Sleeve Reaming {0700, 0703, 0706, 1000}
2000/09/11
The 285-0910 Multi-Tool Gp Incorporates Four Diagnostic Tools into a Single, Hand Held Unit {0774, 0779, 0781, 0782}
2006/12/01
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM TO INSTALL A FUEL BY-PASS IN THE RETURN LINE ON CERTAIN LEXION 450, 460, 465, AND 470 COMBINES
PRODUCT IMPROVEMENT PROGRAM TO INSTALL A FUEL BY-PASS IN THE RETURN LINE ON CERTAIN LEXION 450, 460, 465, AND 470 COMBINES
Service Letter-Australia
Service Letter-CFEL
Service Letter-China
Service Letter-Asia
Service Letter-APD
Service Magazine
New Fuel Shutoff Solenoids With Improved Durability Available {1259}
1999/03/22
New Caterpillar High Efficiency Fuel Filters With STAY CLEAN VALVES&reg; Replace All Standard Fuel Filters In February Of 1999 {1261}
1999/04/12
Disassembly and Assembly
Fuel Cooler - Remove and Install
Lexion 450, Lexion 460, Lexion 465 andLexion 470 Combines Engine Supplement

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.