228-6974 WIRING GP-SCRAPER S/N CEM230-UP PART OF 234-3659 SCRAPER AR Type 2 637G WHEEL SCRAPER

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 228-6974 WIRING GP-
1. 274-2376 WIRING GP-

POWER TRAIN

TRANSMISSION GP

2. 9G-1236 CASE & PAR

CONTROL GP-TRANSMISSION HYD

3. 3T-8363 CONTROL GP
4. 3T-8363 CONTROL GP

COOLER GP

5. 176-6468 COOLER GP-
6. 176-6468 COOLER GP-

CYLINDER GP

7. 219-2076 CYLINDER G

DIFFERENTIAL & BEVEL GEAR GP

8. 198-9870 DIFFERENTI
9. 8W-6758 DIFFERENTI
0. INFORMATION

WHEEL SCRAPER 637G WHEEL SCRAPER CEM
637G Wheel Scraper Coal Bowl CEM00001-UP (MACHINE) POWERED BY C-9 Engine SEBP3624 637G CEM (2001)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

228-6891 WIRING GP-SCRAPER

228-6974 WIRING GP-SCRAPER

274-2376 WIRING GP-SCRAPER

#SEBP36240220

228-6974: WIRING GP-SCRAPER

WIRING GP-SCRAPER

228-6974 WIRING GP-SCRAPER
S/N CEM230-UP
PART OF 234-3659 SCRAPER AR
Type 2

i04931795 SEBP3624

For full view, you need register

Parts for your 637G WHEEL SCRAPER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093 C	[16]	STRAP-CABLE
2.	7K-1181 C	[27]	STRAP-CABLE
3.	8X-9392	[1]	TUBE
4.	9X-0435	[1]	ADAPTER
5.	121-4145	[1]	BRACKET
6.	178-9262	[1]	GUARD
7.	184-2420	[1]	ADAPTER AS
	3E-7401	[1]	ADAPTER
	6V-8397	[1]	SEAL-O-RING
8.	186-4095 Y	[1]	SENSOR GP-PRESSURE (PARKING BRAKE AIR)
9.	197-5840 Y	[1]	CONTROL & MTG GP-POWER TRAIN
10.	204-2281 C	[5]	STRAP-CABLE
11.	204-8000 C	[5]	MOUNTING-CABLE TIE
12.	205-5621 Y	[1]	LAMP GP-SIGNAL (TURN SIGNAL, RH)
13.	205-5622 Y	[1]	LAMP GP-SIGNAL (TURN SIGNAL, LH)
14.	206-3763	[1]	HARNESS AS-LIGHTING (TURN SIGNAL, RH)
	8T-8729	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[5]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[1]	PLUG-SEAL
	114-8843		SLEEVE-PLASTIC (60-CM)
	125-7875		TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	155-2260	[2]	KIT-CONNECTING PLUG (3-PIN)
			(EACH INCLUDES PLUG AS & WEDGE)
15.	206-6606	[1]	HARNESS AS-LIGHTING (TURN SIGNAL, LH)
	8T-8729	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[5]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[1]	PLUG-SEAL
	114-8843		SLEEVE-PLASTIC (60-CM)
	125-7875		TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	155-2260	[2]	KIT-CONNECTING PLUG (3-PIN)
			(EACH INCLUDES PLUG AS & WEDGE)
16.	219-6485 CY	[1]	LAMP GP-FLOOD (24-VOLT)(BOWL)
17.	228-6897	[1]	HARNESS AS-CHASSIS
	8T-8737	[54]	PLUG-SEAL
	9X-3401	[44]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-3402	[26]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	114-8843		SLEEVE-PLASTIC (20-CM)
	114-8845		SLEEVE-PLASTIC (40-CM)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS & WEDGE)
	9X-0145	[1]	RECEPTACLE AS-CONNECTOR (24-PIN)
	9X-1343	[1]	RECEPTACLE AS-CONNECTOR (40-PIN)
	7X-6222	[2]	PLUG AS-CONNECTOR (24-PIN)
18.	228-6965 Y	[1]	BATTERY & WIRING GP
19.	235-6162	[1]	PLATE
20.	238-8665	[1]	SWITCH AS-PRESSURE (PARKING BRAKE AIR)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	186-3735	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-1813		SLEEVE (15-CM)
21.	238-8667	[1]	SWITCH AS-PRESSURE (EJECTOR KICKOUT)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	3K-0360	[1]	SEAL-O-RING
	186-3735	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-1813 E		SLEEVE (15-CM)
22.	279-6721	[1]	HARNESS AS-REAR CHASSIS
	125-7875		TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)
	9X-3401	[6]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-3402	[7]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	9X-0145	[1]	RECEPTACLE AS-CONNECTOR (24-PIN)
	8T-8729	[10]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[10]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[17]	PLUG-SEAL
	114-8843		SLEEVE-PLASTIC (100-CM)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2260	[2]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[3]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS & WEDGE)
	9X-0145	[1]	RECEPTACLE AS-CONNECTOR (24-PIN)
23.	281-2244	[1]	HARNESS AS-VALVE
	8T-8729	[11]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[14]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[6]	PLUG-SEAL
	114-8843		SLEEVE-PLASTIC (180-CM)
	125-7875		TUBE-HEAT SHRINK (7.44-MM DIA)(15-CM)
	102-8802	[2]	KIT-RECEPTACLE (2-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	155-2270	[6]	KIT-CONNECTING PLUG (2-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(EACH INCLUDES PLUG AS & WEDGE)
24.	290-5562 C	[1]	MOUNT (DUAL SWIVEL)
25.	130-5300	[6]	CLIP
26.	132-5789 C	[2]	CLIP (LADDER)
27.	148-8413	[1]	REDUCER AS
	6V-8934	[1]	ADAPTER
	4J-5477	[1]	SEAL-O-RING
28.	3B-7722	[1]	BUSHING-PIPE
29.	3K-0360	[1]	SEAL-O-RING
30.	4D-7794 C	[8]	CLIP
31.	4L-6454 C	[3]	BOLT (3/8-16X1-IN)
32.	4P-7429 C	[1]	CLIP (LADDER)
33.	4P-7581 C	[14]	CLIP (LADDER)
34.	5M-3062 C	[18]	BOLT (3/8-16X0.75-IN)
35.	5P-2228	[3]	BOLT (1/2-13X1-IN)
36.	5P-7854	[1]	CLIP (LOOP)
37.	5S-7379 C	[7]	BOLT (3/8-16X0.875-IN)
38.	6K-4934	[3]	CLIP (SLOT)
39.	6K-4935	[3]	CLIP (TAB)
40.	6V-1889	[1]	CLIP (LOOP)
41.	6V-5048	[1]	SEAL-O-RING
42.	6V-8367 C	[2]	LOCKWASHER
43.	6V-8801	[2]	NUT (3/8-16-THD)
44.	6V-9168	[1]	NUT (11/16-16-THD)
45.	7G-3228 C	[1]	GROMMET
46.	8M-2770 C	[5]	CLIP (LOOP)
47.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
48.	8T-4137 M	[2]	BOLT (M10X1.5X20-MM)
49.	8T-4223	[3]	WASHER-HARD (13.5X25.5X3-MM THK)
50.	8T-4896 C	[30]	WASHER-HARD (10.2X18.5X2.5-MM THK)
51.	8T-9405 M	[8]	BOLT-SOCKET HEAD (M4X0.7X16-MM)
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP36240221

274-2376: WIRING GP-SCRAPER

WIRING GP-SCRAPER

274-2376 WIRING GP-SCRAPER
S/N CEM1-UP
PART OF 197-5928 COOLING AR

i02450419 SEBP3624

For full view, you need register

Parts for your 637G WHEEL SCRAPER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-5169	[1]	GUARD-SWITCH (GROUND LEVEL SHUTDOWN)
2.	128-6157	[1]	PLATE
3.	139-2116	[1]	SWITCH GP-TOGGLE (GROUND LEVEL SHUTDOWN)
4.	213-6214 Y	[1]	PANEL GP-INSTRUMENT (SCRAPER)
5.	213-6216	[1]	HARNESS AS-REAR (SCRAPER INSTRUMENT PANEL)
	155-2260	[6]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS & WEDGE)
	9X-1343	[1]	RECEPTACLE AS-CONNECTOR (40-PIN)
6.	213-9100	[1]	ALARM AS (BACKUP)
	5P-5623 BD		WIRE-ELECTRICAL (16-GA, BLACK)(0.8-M)
	9X-1813 BE		SLEEVE (31-CM)
	3E-3365	[1]	WEDGE-RECEPTACLE LOCK (2-PIN)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
7.	130-5300	[2]	CLIP
8.	3S-9557	[2]	SCREW-PAN HEAD (4-40X0.5-IN)
9.	5M-3062	[6]	BOLT (3/8-16X0.75-IN)
10.	6D-4244	[3]	CLIP (LOOP)
11.	7K-1181	[2]	STRAP-CABLE
12.	8T-4205	[4]	WASHER-HARD (7.2X14.5X2-MM THK)
13.	8T-4896	[6]	WASHER-HARD (10.2X18.5X2.5-MM THK)
14.	8T-9364	[4]	BOLT (1/4-20X0.625-IN)
15.	8T-9405 M	[4]	BOLT-SOCKET HEAD (M4X0.7X16-MM)
	B		USE AS REQUIRED
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP36240222

9G-1236: CASE & PARTS GP-PLANETARY

CASE & PARTS GP-PLANETARY

9G-1236 CASE & PARTS GP-PLANETARY
S/N CWE1-UP
PART OF 9G-0952 GEAR & CASE GP-TRANSFER

i00157384 SEBP3624

9G1236 CASE & PARTS GP-PLANETARY Parts scheme

For full view, you need register

Parts for your 637G WHEEL SCRAPER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3H-1118	[1]	PIN-SPRING
2.	0L-1351	[1]	BOLT (3/8-16X0.875-IN)
3.	5M-2894	[1]	WASHER-HARD (10.2X18.5X2.5-MM THK)
4.	8S-3523	[1]	CLIP
5.	8S-3524	[1]	TUBE
6.	4K-7239	[2]	DOWEL
7.	5M-1932	[1]	STUD-TAPERLOCK (1/2-13X2.17-IN)
8.	8H-8175	[3]	BUSHING
9.	1M-3833	[1]	DOWEL
10.	4K-8603	[1]	PLUG-CUP

#SEBP36240223

3T-8363: CONTROL GP-TRANSMISSION HYD

CONTROL GP-TRANSMISSION HYD

3T-8363 CONTROL GP-TRANSMISSION HYD
S/N CWE681-885
PART OF 9G-0952 GEAR & CASE GP-TRANSFER

i01860897 SEBP3624

3T8363 CONTROL GP-TRANSMISSION HYD Parts scheme

For full view, you need register

Parts for your 637G WHEEL SCRAPER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3D-4197	[1]	COVER
2.	219-2076 Y	[1]	CYLINDER GP-SHIFT
3.	6P-5032 Y	[1]	VALVE GP-TRANSMISSION CONTROL
4.	0S-0509	[2]	BOLT (3/8-16X0.75-IN)
5.	5M-2894	[13]	WASHER-HARD (10.2X18.5X2.5-MM THK)
6.	8M-8157	[2]	SEAL-O-RING
7.	131-8194	[1]	HARNESS AS-TRANSMISSION
	5S-3657	[1]	RECEPTACLE AS-CONNECTOR (10-PIN)
	5B-3718	[1]	SEAL-O-RING
8.	0S-1588	[4]	BOLT (3/8-16X1.25-IN)
9.	0S-1571	[6]	BOLT (3/8-16X1.75-IN)
10.	8S-9089	[1]	BOLT (1/2-13X4.5-IN)
	1F-7958	[1]	NUT-FULL (1/2-13-THD)
	5P-8245	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
	4B-4280	[1]	WASHER (13.5X27X2.5-MM THK)
	9S-5222	[1]	SPACER (12.73X18.87X26.19-MM THK)
11.	2S-1381	[1]	SPRING
12.	8S-0669	[1]	SLEEVE
13.	8M-5010	[2]	SEAL-O-RING
14.	5S-0899	[1]	DETENT AS
15.	1S-3206	[2]	BEARING AS-NEEDLE
16.	8P-4764	[1]	PIN
17.	8B-4037	[2]	WASHER (0.766X1.75X0.083-IN THK)
18.	9H-0223	[2]	SEAL-LIP TYPE
19.	1P-8247	[1]	SHAFT
20.	8S-6377	[1]	PIN-LOCK
23.	8M-8514	[6]	SEAL-O-RING
24.	5S-3632	[3]	SLEEVE
25.	9P-2182	[1]	GEAR (33-TEETH)
26.	7M-2082	[1]	GASKET
27.	9W-1398	[4]	BOLT-SPECIAL
	1T-0738	[4]	WASHER (8.4X19X1.83-MM THK)
28.	3T-0565	[1]	COVER
29.	131-5393 CY	[1]	SENSOR GP-POSITION (TRANSMISSION GEAR)
30.	0L-1352	[4]	BOLT (3/8-16X3.25-IN)
31.	2J-6356	[1]	RING-RETAINING
32.	1P-8260	[1]	CAMSHAFT
33.	5S-7954	[1]	LEVER AS
34.	9S-2825	[1]	DOWEL
35.	6Y-8676	[1]	PLATE AS
	2K-3455	[1]	PIN-SPRING
36.	7J-2036	[1]	SEAL-O-RING
37.	8S-5575	[1]	SEAL-LIP TYPE
38.	0S-1614	[2]	BOLT (1/4-20X0.5-IN)
	9X-2026	[2]	WASHER (6.5X17X1-MM THK)
39.	8C-9648	[4]	MOUNT-ISOLATION
40.	130-5300	[2]	CLIP
41.	1K-4649	[1]	SPACER (0.516X1X1-IN THK)
42.	5R-7137	[1]	WASHER-SEALING
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

#SEBP36240224

3T-8363: CONTROL GP-TRANSMISSION HYD

CONTROL GP-TRANSMISSION HYD

3T-8363 CONTROL GP-TRANSMISSION HYD
S/N CWE886-UP
PART OF 9G-0952 GEAR & CASE GP-TRANSFER

i02708176 SEBP3624

For full view, you need register

Parts for your 637G WHEEL SCRAPER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3T-0565	[1]	COVER
2.	3D-4197	[1]	COVER
3.	9P-2182	[1]	GEAR (33-TEETH)
4.	131-8194	[1]	HARNESS AS-TRANSMISSION
	5S-3657	[1]	RECEPTACLE AS-CONNECTOR (10-PIN)
5.	0S-0509	[2]	BOLT (3/8-16X0.75-IN)
6.	7M-2082	[1]	GASKET
7.	2J-6356	[1]	RING-RETAINING
8.	6P-5032 Y	[1]	VALVE GP-TRANSMISSION CONTROL
9.	130-5300	[2]	CLIP
10.	8S-0669	[1]	SLEEVE
11.	8M-5010	[2]	SEAL-O-RING
12.	8M-8157	[2]	SEAL-O-RING
13.	1A-2029	[3]	BOLT (3/8-16X1.125-IN)
14.	0S-1588	[4]	BOLT (3/8-16X1.25-IN)
15.	219-2076 Y	[1]	CYLINDER GP-SHIFT
16.	8S-9089	[1]	BOLT (1/2-13X4.5-IN)
17.	4B-4280	[1]	WASHER (13.5X27X2.5-MM THK)
18.	9S-5222	[1]	SPACER (12.73X18.87X26.19-MM THK)
19.	5R-7137	[1]	WASHER-SEALING
20.	1F-7958	[1]	NUT-FULL (1/2-13-THD)
21.	5S-0899	[1]	DETENT AS
21A.	1S-3206	[2]	BEARING AS-NEEDLE
21B.	8P-4764	[1]	PIN
22.	8B-4037	[2]	WASHER (0.766X1.75X0.083-IN THK)
23.	5S-7954	[1]	LEVER AS
23A.	9S-2825	[1]	DOWEL
24.	1P-8247	[1]	SHAFT
25.	0S-1571	[6]	BOLT (3/8-16X1.75-IN)
26.	2S-1381	[1]	SPRING
27.	9H-0223	[2]	SEAL-LIP TYPE
28.	8S-6377	[1]	PIN-LOCK
29.	1P-8260	[1]	CAMSHAFT
30.	8M-8514	[6]	SEAL-O-RING
31.	5S-3632	[3]	SLEEVE
32.	5B-3718	[1]	SEAL-O-RING
33.	0L-1352	[4]	BOLT (3/8-16X3.25-IN)
34.	5M-2894	[13]	WASHER-HARD (10.2X18.5X2.5-MM THK)
35.	296-3423 C	[1]	SENSOR GP-POSITION (TRANSMISSION GEAR)
36.	0S-1614	[2]	BOLT (1/4-20X0.5-IN)
37.	1T-0738	[4]	WASHER (8.4X19X1.83-MM THK)
38.	9X-2026	[2]	WASHER (6.5X17X1-MM THK)
39.	8S-5575	[1]	SEAL-LIP TYPE
40.	6Y-8676	[1]	PLATE AS
	2K-3455	[1]	PIN-SPRING
41.	7J-2036	[1]	SEAL-O-RING
42.	9W-1398	[4]	BOLT-SPECIAL
43.	8C-9648	[4]	MOUNT-ISOLATION
46.	1K-4649	[1]	SPACER (0.516X1X1-IN THK)
47.	5P-8245	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

#SEBP36240225

176-6468: COOLER GP-TRANSMISSION OIL

COOLER GP-TRANSMISSION OIL

176-6468 COOLER GP-TRANSMISSION OIL
S/N 4ZF2708-25821
PART OF 174-7522 ENGINE AR

i01471782 SEBP3624

1766468 COOLER GP-TRANSMISSION OIL Parts scheme

For full view, you need register

Parts for your 637G WHEEL SCRAPER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2S-0795	[2]	GASKET
2.	8M-9307	[1]	PLUG
3.	8S-4304	[1]	BONNET-XMSN OIL COOLER
4.	137-8480	[1]	CORE AS (TRANSMISSION OIL)
	8T-6764	[1]	PLUG-PIPE (1/8-27-THD)
5.	180-3907	[1]	SEAL-INTEGRAL
6.	198-3462	[1]	DIVERTER
7.	217-8723	[1]	ELBOW
8.	218-8557	[1]	BRACKET
9.	1A-5822	[2]	BOLT (1/2-13X2.75-IN)
10.	1B-2886	[4]	BOLT (1/2-13X3.75-IN)
11.	148-8407	[1]	PLUG AS
	9S-4191	[1]	PLUG (9/16-18-THD)
	3J-1907	[1]	SEAL-O-RING
12.	6F-7062	[1]	WASHER (12.7X19.05X1.83-MM THK)
13.	6V-3668 M	[2]	BOLT (M12X1.75X30-MM)
14.	6V-7981 M	[3]	BOLT (M10X1.5X70-MM)
15.	7B-3235	[4]	BOLT (1/2-13X1.375-IN)
16.	7D-1649	[4]	WASHER-HARD (13.5X32X5-MM THK)
17.	8T-6761	[2]	PLUG-PIPE (1-11-1/2 NPT THD)
18.	8T-7950 M	[3]	BOLT (M10X1.5X180-MM)
19.	9X-8873	[2]	BOLT (1/2-13X2.25-IN)
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP36240226

176-6468: COOLER GP-TRANSMISSION OIL

COOLER GP-TRANSMISSION OIL

176-6468 COOLER GP-TRANSMISSION OIL
S/N 4ZF25822-UP
PART OF 174-7522 ENGINE AR

i03429662 SEBP3624

For full view, you need register

Parts for your 637G WHEEL SCRAPER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2S-0795	[2]	GASKET
2.	8M-9307	[1]	PLUG
3.	8S-4304	[1]	BONNET-XMSN OIL COOLER
4.	137-8480 C	[1]	CORE AS (TRANSMISSION OIL)
	8T-6764	[1]	PLUG-PIPE (1/8-27-THD)
5.	180-3907	[1]	SEAL-INTEGRAL
6.	198-3462	[1]	DIVERTER
7.	348-5792 C	[1]	BRACKET
8.	314-3997 C	[1]	BONNET-OIL COOLER
9.	392-0818 C	[1]	PLUG AS
	6V-6609	[1]	SEAL-O-RING
	360-3693	[1]	PLUG (3/4-16-THD)
10.	398-5614 C	[1]	PLUG AS
	6V-5064	[1]	SEAL-O-RING
	360-3684	[1]	PLUG
11.	398-5599	[1]	PLUG AS
	360-3692	[1]	PLUG
	6V-3250	[1]	SEAL-O-RING
12.	6F-7062	[1]	WASHER (12.7X19.05X1.83-MM THK)
13.	6V-8675 M	[1]	BOLT (M12X1.75X35-MM)
14.	7B-3235	[4]	BOLT (1/2-13X1.375-IN)
15.	7D-1649	[3]	WASHER-HARD (13.5X32X5-MM THK)
16.	7X-2543 CM	[2]	BOLT (M10X1.5X120-MM)
17.	8T-6761 C	[1]	PLUG-PIPE (1-11-1/2 NPT THD)
18.	8T-6854 M	[4]	BOLT (M10X1.5X200-MM)
19.	9X-8873	[2]	BOLT (1/2-13X2.25-IN)
20.	9X-8874 C	[6]	BOLT (1/2-13X3-IN)
21.	4T-7968	[2]	GASKET
22.	3H-5523	[2]	COVER
23.	0S-1620	[8]	BOLT (1/2-13X0.75-IN)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP36240227

219-2076: CYLINDER GP-SHIFT

CYLINDER GP-SHIFT

219-2076 CYLINDER GP-SHIFT
S/N CWE1-UP
PART OF 3T-8363 CONTROL GP-TRANSMISSION HYD

i01860916 SEBP3624

For full view, you need register

Parts for your 637G WHEEL SCRAPER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6I-9466	[1]	BODY-SHIFT CYLINDER
2.	5S-3714	[1]	RETAINER
3.	2S-5717	[1]	LOCKNUT (3/8-16-THD)
4.	5S-0909	[1]	LINK-ADJUSTMENT
5.	2P-9216	[1]	SPOOL-SHIFT CYLINDER
6.	2S-3625	[1]	COVER
7.	5P-4268	[1]	SEAL-O-RING
8.	321-8641	[6]	PLUG AS
			(EACH INCLUDES)
	9S-8001	[1]	PLUG
	238-5078	[1]	SEAL-O-RING
9.	302-3813 J	[1]	VALVE GP-SOLENOID (UPSHIFT)
9A.	302-3813 J	[1]	VALVE GP-SOLENOID (DOWNSHIFT)
10.	0S-1594	[2]	BOLT (3/8-16X1-IN)
11.	200-6987	[1]	PLUG AS
	9S-4191	[1]	PLUG (9/16-18-THD)
	153-4906	[1]	SEAL-O-RING
12.	4B-9782	[1]	BALL
13.	4J-9780	[1]	PLUG-ORIFICE

			AVAILABLE REPAIR KIT(S):
	100-4083 J	[1]	KIT-SEAL (SHIFT SOLENOID VALVE)
			(INCLUDES SEAL-O-RINGS & RING-BACKUPS)
	J		(KIT MARKED J SERVICES PART(S) MARKED J)

#SEBP36240228

198-9870: DIFFERENTIAL & BEVEL GEAR GP

DIFFERENTIAL & BEVEL GEAR GP

198-9870 DIFFERENTIAL & BEVEL GEAR GP
S/N CEM1-UP
PART OF 199-0977 POWER TRAIN AR

i01717717 SEBP3624

1989870 DIFFERENTIAL & BEVEL GEAR GP Parts scheme

For full view, you need register

Parts for your 637G WHEEL SCRAPER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1T-0589	[1]	CUP-BEARING
2.	2G-4165	[1]	LOCK
3.	2G-4166 B	[8]	SHIM (0.007-IN THK)
4.	2G-4167 B	[7]	SHIM (0.005-IN THK)
5.	2G-4168	[1]	RING-ADJUSTMENT
6.	2G-4169	[1]	CAGE-BEARING
7.	2K-5065	[1]	CONE-BEARING
8.	2S-9129	[1]	CONE-BEARING
9.	3F-1953	[1]	DOWEL
10.	3J-0634	[1]	SEAL-O-RING
11.	4B-8407	[1]	GASKET-COPPER
12.	5D-7449	[1]	CUP-BEARING
13.	5D-7453	[1]	CONE-BEARING
14.	5F-0304	[1]	PLUG (DIFFERENTIAL)
15.	5P-1112	[1]	CUP-BEARING
16.	5P-3723	[1]	CONE-BEARING
17.	6D-7589	[1]	CAGE-BEARING
18.	6D-7613 B	[6]	SHIM (0.005-IN THK)
19.	6D-7614 B	[8]	SHIM (0.007-IN THK)
20.	6D-7690	[1]	CUP-BEARING
21.	6D-9877	[1]	YOKE AS
22.	6G-9333	[1]	CAP-FILLER (DIFFERENTIAL)
23.	8W-6758 Y	[1]	DIFFERENTIAL GP
24.	9D-1845	[1]	PINION-BEVEL (15-TEETH)
25.	9D-1846	[1]	GEAR-DIFFERENTIAL RING (57-TEETH)
26.	9D-7179	[1]	CARRIER-DIFFERENTIAL
27.	9D-7229	[1]	COVER
28.	9D-7246	[1]	RETAINER
29.	9D-7285	[1]	GAUGE AS (DIFFERENTIAL)
30.	9M-7783	[21]	SPACER (0.65X1.188X0.81-IN THK)
31.	205-7336	[1]	TUBE AS
32.	032-5691	[1]	BOLT-LOCKING
33.	2S-4071	[1]	SEAL-O-RING
34.	2S-5658	[18]	WASHER-HARD (17X29X3-MM THK)
35.	3D-0490	[20]	STUD-TAPERLOCK (1/2-13X1.97-IN)
36.	4D-4009	[3]	DOWEL
37.	4K-0367	[18]	NUT-FULL (5/8-11-THD)
38.	5P-1086	[1]	SEAL-LIP TYPE
39.	5P-7213	[8]	WASHER-HARD (13.5X20.5X2-MM THK)
40.	5P-8245	[30]	WASHER-HARD (13.5X25.5X3-MM THK)
41.	6K-7917	[1]	BOLT-LOCKING (1/2-13X1-IN)
42.	6M-5218	[1]	SEAL-O-RING
43.	6V-4463	[18]	BOLT-LOCKING (1/2-13X1.375-IN)
44.	6V-8188	[20]	NUT (1/2-13-THD)
45.	8F-6711	[1]	SEAL-O-RING
46.	8T-6871	[21]	BOLT (5/8-11X2.5-IN)
47.	9M-5892	[1]	SEAL-O-RING
	B		USE AS REQUIRED
	Y		SEPARATE ILLUSTRATION

#SEBP36240229

8W-6758: DIFFERENTIAL GP

DIFFERENTIAL GP

8W-6758 DIFFERENTIAL GP
S/N CEM1-UP
PART OF 198-9870 DIFFERENTIAL & BEVEL GEAR GP

i00157331 SEBP3624

For full view, you need register

Parts for your 637G WHEEL SCRAPER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8W-5257 Y	[1]	DIFFERENTIAL GP-NOSPIN
2.	2G-4172	[1]	CASE AS
3.	1D-4585	[12]	BOLT (5/8-11X3.25-IN)
	2S-5658	[12]	WASHER-HARD (17X29X3-MM THK)
	Y		SEPARATE ILLUSTRATION

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Engine News

270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}

Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}

Tool Operating Manual

Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Testing and Adjusting

Electric Starting System - Test
C-9 Engines for Caterpillar Built Machines

Troubleshooting

CID 0168 FMI 01 System Voltage Low
C-9 Engine for Caterpillar Built Machines

CID 0168 FMI 00 System Voltage High
C-9 Engine for Caterpillar Built Machines

CID 0263 FMI 03 Digital Sensor Supply short to +batt
C-9 Engine for Caterpillar Built Machines

CID 0263 FMI 04 Digital Sensor Supply short to ground
C-9 Engine for Caterpillar Built Machines

Electrical Connectors - Inspect
C-9 Engine for Caterpillar Built Machines

CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C-9 Engine for the 973C Track-Type Loader

CID 0100 FMI 04 Engine Oil Pressure short to ground
C-9 Engine for Caterpillar Built Machines

CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C-9 Engine for Caterpillar Built Machines

CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C-9 Engine for the 973C Track-Type Loader

CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C-9 Engine for the 973C Track-Type Loader

CID 0273 FMI 03 Turbo Outlet Pressure open/short to +batt
C-9 Engine for Caterpillar Built Machines

CID 0273 FMI 04 Turbo Outlet Pressure short to ground
C-9 Engine for Caterpillar Built Machines

CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C-9 Engine for Caterpillar Built Machines

CID 0274 FMI 04 Atmospheric Pressure short to ground
C-9 Engine for Caterpillar Built Machines

CID 0041 FMI 04 8 Volt DC Supply short to ground
C-9 Engine for Caterpillar Built Machines

CID 0248 FMI 09 Cat Data Link not communicating
C-9 Engine for Caterpillar Built Machines

CID 0042 FMI 11 Inject Actuation Control Valve open/short
C-9 Engine for Caterpillar Built Machines

CID 0094 FMI 03 Fuel Pressure open/short to +batt
C-9 Engine for Caterpillar Built Machines

CID 0094 FMI 04 Fuel Pressure short to ground
C-9 Engine for Caterpillar Built Machines

CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
C-9 Engine for Caterpillar Built Machines

CID 0110 FMI 04 Engine Coolant Temperature short to ground
C-9 Engine for Caterpillar Built Machines

CID 0164 FMI 00 High Injector Actuation Pressure
C-9 Engine for Caterpillar Built Machines

CID 0164 FMI 03 Injector Actuation Pressure voltage high
C-9 Engine for the 973C Track-Type Loader

CID 0175 FMI 03 Engine Oil Temperature open/short to +batt
C-9 Engine for the 973C Track-Type Loader

CID 0175 FMI 04 Engine Oil Temperature short to ground
C-9 Engine for the 973C Track-Type Loader

CID 0267 FMI 02 Incorrect Engine Shutdown Switch inputs
C-9 Engine for Caterpillar Built Machines

CID 0041 FMI 03 8 Volt DC Supply short to +batt
C-9 Engine for Caterpillar Built Machines

How To Use the Functional Tests
C-9 Engine for Caterpillar Built Machines

Air Inlet Heater Circuit - Test
C-9 Engine for Caterpillar Built Machines

CID 0164 FMI 11 Injector Actuation Pressure system fault
C-9 Engine for Caterpillar Built Machines

CID 0190 FMI 02 Loss of Engine Speed Signal
C-9 Engine for the 973C Track-Type Loader

CID 0190 FMI 11 Engine Speed Sensor mechanical failure
C-9 Engine for Caterpillar Built Machines

CID 0617 FMI 05 Air Inlet Heater Relay open/current below normal
C-9 Engine for the 973C Track-Type Loader

Cat Data Link Circuit - Test
C-9 Engine for Caterpillar Built Machines

Electrical Power Supply Circuit - Test
C-9 Engine for Caterpillar Built Machines

Engine Pressure Sensor Open or Short Circuit - Test
C-9 Engine for Caterpillar Built Machines

Engine Shutdown Switch Circuit - Test
C-9 Engine for Caterpillar Built Machines

CID 0275 FMI 03 Right Turbo Inlet Pressure open/short to +batt
C-9 Engine for Caterpillar Built Machines

CID 0275 FMI 04 Right Turbo Inlet Pressure short to ground
C-9 Engine for Caterpillar Built Machines

CID 0164 FMI 02 Injector Actuation Pressure signal erratic
C-9 Engine for the 973C Track-Type Loader

CID 0342 FMI 02 Loss of Secondary Engine Speed signal
C-9 Engine for Caterpillar Built Machines

CID 0091 FMI 02 Incorrect Throttle Switch inputs
C-9 Engine for the 973C Track-Type Loader

CID 0175 FMI 03 Engine Oil Temperature open/short to +batt
C-9 Engine for Caterpillar Built Machines

CID 0175 FMI 04 Engine Oil Temperature short to ground
C-9 Engine for Caterpillar Built Machines

CID 0320 FMI 02 Speed/Timing Sensor Loss of Signal
C-9 Engine for Caterpillar Built Machines

Injection Actuation Pressure Control Valve Circuit - Test
C-9 Engine for Caterpillar Built Machines

CID 0164 FMI 04 Injector Actuation Pressure voltage low
C-9 Engine for the 973C Track-Type Loader

CID 0342 FMI 11 Secondary Engine Speed Sensor mechanical failure
C-9 Engine for the 973C Track-Type Loader

CID 1715 FMI 03 Engine Oil Temperature Sensor #2 short to +batt
C-9 Engine for Caterpillar Built Machines

CID 1715 FMI 04 Engine Oil Temperature Sensor #2 short to ground
C-9 Engine for Caterpillar Built Machines

Engine Pressure Sensor Open or Short Circuit - Test
C-9 Engine for the 973C Track-Type Loader

Sensors and Electrical Connectors
C-9 Engine for Caterpillar Built Machines

5 Volt Engine Pressure Sensor Supply Circuit - Test
C-9 Engine for Caterpillar Built Machines

Analog Sensor Supply Circuit - Test
C-9 Engine for Caterpillar Built Machines

Digital Sensor Supply Circuit - Test
C-9 Engine for Caterpillar Built Machines

Engine Speed/Timing Sensor Circuit - Test
C-9 Engine for Caterpillar Built Machines

Throttle Position Sensor Circuit - Test
C-9 Engine for Caterpillar Built Machines

Throttle Switch Circuit - Test
C-9 Engine for the 973C Track-Type Loader

CID 0444 FMI 03 Start Relay short to +batt
C-9 Engine for the 973C Track-Type Loader

CID 0444 FMI 05 Start Relay open circuit
C-9 Engine for the 973C Track-Type Loader

CID 0444 FMI 06 Start Relay short to ground
C-9 Engine for the 973C Track-Type Loader

Start Relay Circuit - Test
C-9 Engine for the 973C Track-Type Loader

Sensors and Electrical Connectors
C-9 Engine for the 973C Track-Type Loader

CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C-9 Engine for the 973C Track-Type Loader

CID 0274 FMI 04 Atmospheric Pressure short to ground
C-9 Engine for the 973C Track-Type Loader

Engine Wiring Information
C-9 Engine for Caterpillar Built Machines

User Defined Shutdown Input Circuit - Test
C-9 Engine for Caterpillar Built Machines

CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C-9 Engine for Caterpillar Built Machines

CID 0617 FMI 06 Air Inlet Heater Relay grounded/current above norm
C-9 Engine for Caterpillar Built Machines

Service Magazine

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04

A New Engine Oil Grade Plug 0W20 Is Now Available {1408}
2002/04/22

Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13

Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/12

Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08

Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08

Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Caterpillar Parts SIS Catalog 637G :

228-6974 WIRING GP-SCRAPER

228-6891 WIRING GP-SCRAPER

213-6224 WIRING GP-SCRAPER

213-6215 WIRING GP-SCRAPER

199-3338 WIRING GP-SCRAPER

222-9135 WIRING GP-ENGINE ELECTRONIC

274-2376 WIRING GP-SCRAPER

9G-1236 CASE & PARTS GP-PLANETARY

3T-8363 CONTROL GP-TRANSMISSION HYD

176-6468 COOLER GP-TRANSMISSION OIL

219-2076 CYLINDER GP-SHIFT

198-9870 DIFFERENTIAL & BEVEL GEAR GP

Truck sale:

On Request

Caterpillar 637G, Construction
- Scrapers
FOLEY EQUIPMENT COMPANY

On Request

Caterpillar 637G, Construction
- Scrapers
FOLEY EQUIPMENT COMPANY

685,000

Caterpillar 637G, Construction
- Scrapers
ALTORFER INC.

CATERPILLAR 637G 2013
- WHEEL TRACTOR SCRAPERS
ALTORFER INC.
2600 6th Street SW - Cedar Rapids - Io

USD $875,556

2011 CAT 637G

Ezyquip Hire - Toowoomba
Toowoomba, QLD, Australia