AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

194-1682 COVER GP-CYLINDER BLOCK S/N 5GG1-UP PART OF 201-4205 ENGINE AR-COMPLETE 325C EXCAVATOR


BASIC ENGINE
CYLINDER BLOCK GP
HOUSING GP-FRONT
VALVE MECHANISM GP
CRANKSHAFT GP
CYLINDER BLOCK GP
CYLINDER HEAD GP

EXCAVATOR 325C EXCAVATOR S2C
 325C Material Handler S2C00001-UP (MACHINE) POWERED BY 3126 Engine SEBP3627 325C S2C   (2001)

BASIC ENGINE

CYLINDER BLOCK GP
COVER GP-CYLINDER BLOCK
194-1682 COVER GP-CYLINDER BLOCK
CYLINDER BLOCK GP
129-1165 CYLINDER BLOCK GP
CYLINDER BLOCK GP
263-3774 CYLINDER BLOCK GP
CYLINDER BLOCK GP
305-8141 CYLINDER BLOCK GP
PLUG GP-CYLINDER BLOCK
159-0303 PLUG GP-CYLINDER BLOCK
PLUG GP-ENGINE
162-8068 PLUG GP-ENGINE
 

#SEBP36270010
 

194-1682: COVER GP-CYLINDER BLOCK

194-1682 COVER GP-CYLINDER BLOCK
S/N 5GG1-UP
PART OF 201-4205 ENGINE AR-COMPLETE
i01554171 SEBP3627
1941682 COVER GP-CYLINDER BLOCK Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 517-0553 B [1] GASKET  
2. 2W-6544 [1] COVER  
3. 357-4585 [1] ELBOW AS  
  3E-2332 [1] ELBOW  
  214-7566 [1] SEAL-O-RING  
  214-7568 [1] SEAL-O-RING  
4. 4P-5918 [3] CLIP  
5. 4P-9128 [1] ADAPTER  
6. 4Y-9652 [3] GASKET  
7. 342-4977 [3] COVER-SIDE  
8. 7W-3872 [6] SLEEVE  
9. 9X-2097 M [1] STUD (M8X1.25-THD)  
10. 110-7618 [3] BOLT AS  
12. 210-3321 M [1] STUD (M8X1.25-THD)  
14. 4F-9653 [1] SEAL-O-RING  
15. 5C-7261 M [1] NUT (M8X1.25-THD)  
16. 6V-2317 M [23] BOLT (M8X1.25X30-MM)  
17. 6V-5843 M [2] BOLT (M10X1.5X45-MM)  
18. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
19. 9M-1974 [22] WASHER-HARD (8.8X16X2-MM THK)  
20. 398-5597 [1] PLUG AS  
  214-7568 [1] SEAL-O-RING  
  360-3692 [1] PLUG  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP36270011
 

118-1727: COVER GP-FRONT HOUSING

118-1727 COVER GP-FRONT HOUSING -ACCESSORY DRIVE
S/N 5GG1-UP
REQUIRED ON ENGINES WITHOUT FACTORY INSTALLED AIR COMPRESSOR
PART OF 201-4205 ENGINE AR-COMPLETE
i00480574 SEBP3627
1181727 COVER GP-FRONT HOUSING Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-8245 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
2. 6V-5696 M [2] BOLT (M12X1.75X80-MM)  
3. 4W-2026 [1] COVER  
4. 135-9819 [1] SEAL-INTEGRAL  
5. 6V-8149 M [2] NUT (M12X1.75-THD)  
  M   METRIC PART
 

#SEBP36270012
 

136-8888: COVER GP-FRONT HOUSING

136-8888 COVER GP-FRONT HOUSING
S/N 5GG1-UP
PART OF 201-4205 ENGINE AR-COMPLETE
FOR USE WITH ENGINE WITHOUT FRONT OIL FILL TUBE
i00629481 SEBP3627
1368888 COVER GP-FRONT HOUSING Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-2317 M [7] BOLT (M8X1.25X30-MM)  
2. 136-0823 [1] COVER AS-FRONT  
3. 8T-0100 M [1] BOLT (M8X1.25X60-MM)  
4. 139-3526 [1] GASKET  
5. 7C-1445 [1] COVER  
6. 061-9455 [1] SEAL-O-RING  
7. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
8. 5C-7261 M [2] NUT (M8X1.25-THD)  
  M   METRIC PART
 

#SEBP36270013
 

135-5035: COVER GP-VALVE MECHANISM

135-5035 COVER GP-VALVE MECHANISM
S/N 5GG1-UP
REAR BREATHER, FRONT OIL FILL
PART OF 201-4205 ENGINE AR-COMPLETE
i00635392 SEBP3627
1355035 COVER GP-VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 167-8361 [1] COVER AS-BASE  
  5P-5678 BD SEAL (2.1-M)  
2. 2W-9499 M [14] BOLT (M6X1X40-MM)  
3. 236-2096 [1] COVER AS (TOP)  
  5P-5678 BD SEAL (2.1-M)  
4. 5P-0537 [28] WASHER-HARD (7.2X14.5X2-MM THK)  
5. 6V-7728 M [14] BOLT (M6X1X45-MM)  
6. 2W-6225 [1] CAP AS-OIL FILLER (ENGINE)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  M   METRIC PART
 

#SEBP36270014
 

113-6087: CRANKSHAFT GP

113-6087 CRANKSHAFT GP
S/N 5GG1-UP
PART OF 159-3459 ENGINE AR-CORE
i00477413 SEBP3627
1136087 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 489-2731 [1] CRANKSHAFT AS  
1A. 1B-8705 [1] KEY-WOODRUFF  
1B. 2W-8147 [1] GEAR (50-TEETH)  
2. 212-4893 [1] BEARING-THRUST (STANDARD)  
  229-5153 AB BEARING-THRUST (0.25-MM US)  
  229-5154 AB BEARING-THRUST (0.5-MM US)  
  229-5155 AB BEARING-THRUST (0.5-MM OS)  
  229-5156 AB BEARING-THRUST (0.5-MM OS, 0.5-MM US)  
3. 107-7708 [6] BEARING-MAIN (STANDARD)  
  145-0168 AB BEARING-MAIN (0.5-MM OS)  
  145-0170 AB BEARING-MAIN (0.5-MM OS, 0.5-MM US)  
  145-0162 AB BEARING-MAIN (0.25-MM US)  
  145-0164 AB BEARING-MAIN (0.5-MM US)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP36270015
 

129-1165: CYLINDER BLOCK GP

129-1165 CYLINDER BLOCK GP
S/N 5GG1-UP
PART OF 159-3459 ENGINE AR-CORE
i00619041 SEBP3627
1291165 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 305-8141 Y [1] CYLINDER BLOCK GP  
2. 1W-8407 [2] SLEEVE  
3. 6V-3538 [2] DOWEL  
4. 7N-5683 [2] DOWEL  
5. 396-0393 [1] PLUG AS  
5A. 360-3677 [1] PLUG (7/16-20-THD)  
5B. 214-7566 [1] SEAL-O-RING  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP36270016
 

263-3774: CYLINDER BLOCK GP

263-3774 CYLINDER BLOCK GP
S/N 5GG1-UP
PART OF 305-8141 CYLINDER BLOCK GP
i02347180 SEBP3627
2633774 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7E-2968 [7] CAP-CRANKSHAFT BEARING  
2. 9X-8916 M [14] BOLT (M16X2X140-MM)  
3. 5P-8247 [14] WASHER-HARD (17X32X3.5-MM THK)  
  M   METRIC PART
 

#SEBP36270017
 

305-8141: CYLINDER BLOCK GP

305-8141 CYLINDER BLOCK GP
S/N 5GG1-UP
PART OF 129-1165 CYLINDER BLOCK GP
i02690923 SEBP3627
3058141 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 263-3774 Y [1] CYLINDER BLOCK GP  
2. 2M-6471 [2] PLUG-CUP  
3. 3H-5552 [1] PLUG-CUP  
4. 309-5131 [1] PLUG AS  
  9S-8006 [1] PLUG (7/8-14-THD)  
  238-5081 [1] SEAL-O-RING  
5. 2W-7213 [6] BUSHING (CAMSHAFT)  
6. 216-5586 [1] BUSHING (CAMSHAFT)  
   
  107-7604 ABF SLEEVE-CYLINDER  
    (FOR SALVAGE OF CYLINDER BORE IN BLOCK.
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  F   NOT SHOWN
  Y   SEPARATE ILLUSTRATION
 

#SEBP36270018
 

205-1271: CYLINDER HEAD AS

205-1271 CYLINDER HEAD AS
S/N 5GG1-2634; 5GG2662-2896
PART OF 205-1272 CYLINDER HEAD AS, 205-1273 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@205-1272@@@@@
i01636295 SEBP3627
2051271 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
2. 8M-5860 [12] PLUG-CUP  
3. 4F-5695 [2] PLUG-CUP  
4. 227-2911 [6] SLEEVE-INJECTOR  
5. 155-9504 [12] INSERT-VALVE SEAT (INLET)  
6. 147-8218 [6] INSERT-VALVE SEAT (EXHAUST)  
7. 8C-0563 [12] SEAL-O-RING  
8. 154-8025 [6] SETSCREW-SOCKET  
9. 9S-9334 [1] PLUG  
10. 9X-7712 [1] SEAL-O-RING  
 

#SEBP36270019
 

205-1272: CYLINDER HEAD AS

205-1272 CYLINDER HEAD AS
S/N 5GG1-UP
FIELD REPLACEMENT FOR @@@@@205-1271@@@@@
i01636378 SEBP3627
2051272 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. Y [1] CYLINDER HEAD AS  
2. 9S-8002 [6] PLUG (7/16-20-THD)  
3. 6V-5048 [6] SEAL-O-RING  
4. 9S-8004 [4] PLUG (9/16-18-THD)  
5. 3J-1907 [4] SEAL-O-RING  
6. 147-8214 [12] SEAL-VALVE STEM  
7. 140-9670 [12] GUIDE-VALVE  
8. 9S-8006 [1] PLUG (7/8-14-THD)  
9. 2M-9780 [1] SEAL-O-RING  
10. 9S-9334 [1] PLUG  
11. 9X-7712 [1] SEAL-O-RING  
12. 147-8220 [6] GUIDE-VALVE  
13. 102-6229 [6] SEAL-VALVE STEM  
14. 137-6715 [6] SEAT-VALVE SPRING  
15. 9S-8005 [1] PLUG (3/4-16-THD)  
16. 3K-0360 [1] SEAL-O-RING  
17. 1N-5999 [2] PLUG-O-RING  
18. 7J-0204 [2] SEAL-O-RING  
19. 9S-8003 [1] PLUG (1/2-20-THD)  
20. 1J-9671 [1] SEAL-O-RING  
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Usage of Cylinder Head Gaskets{1124}
Usage of Cylinder Head Gaskets{1124}
Specifications
Cylinder Block
3126B Engine for Caterpillar Built Machines
Piston Cooling Jet
3126B Engine for Caterpillar Built Machines
Cylinder Block Cover Group
3126B Engine for Caterpillar Built Machines
Main Bearing Journal
3126B Engine for Caterpillar Built Machines
Piston Cooling Jet
3126B Engine for Caterpillar Built Machines
Tool Operating Manual
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Testing and Adjusting
Cylinder Block - Inspect
3126B Engines
Excessive Bearing Wear - Inspect
3126B Engines
Main Bearings - Inspect
3126B Engines
Disassembly and Assembly
Bearing Clearance - Check
3126B Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Remove
3126B Engines for Caterpillar Built Machines
Piston Cooling Jets - Remove and Install
3126B Engines for Caterpillar Built Machines
Camshaft Bearings - Remove and Install
3126B Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Install
3126B Engines for Caterpillar Built Machines

Caterpillar Parts SIS Catalog 325C :

CARRIER GP-SEAL
4W-3462 CARRIER GP-SEAL
CARRIER GP-SEAL
132-3844 CARRIER GP-SEAL
CAMSHAFT GP
216-7922 CAMSHAFT GP
201-3792 INSTALLATION AR-ENGINE
159-3459 ENGINE AR-CORE
201-4205 ENGINE AR-COMPLETE
219-1640 ENGINE AR
211-1665 GENERAL AR
COVER GP-FRONT HOUSING
118-1727 COVER GP-FRONT HOUSING
COVER GP-FRONT HOUSING
136-8888 COVER GP-FRONT HOUSING
COVER GP-VALVE MECHANISM
135-5035 COVER GP-VALVE MECHANISM
CRANKSHAFT GP
113-6087 CRANKSHAFT GP
CYLINDER BLOCK GP
129-1165 CYLINDER BLOCK GP
CYLINDER BLOCK GP
263-3774 CYLINDER BLOCK GP
CYLINDER BLOCK GP
305-8141 CYLINDER BLOCK GP
CYLINDER HEAD AS
205-1271 CYLINDER HEAD AS

Truck sale:

 
 
Caterpillar 325C
- Crawler Excavators
WESTERN STATES EQUIPMENT
 
304,350 
Caterpillar 325 CF, Crawler Excavators, Construction

WHEELER MACHINERY CO.
 
304,355 
Caterpillar 325 CF, Crawler Excavators, Construction

WHEELER MACHINERY CO.
 
 
Caterpillar 325C, Raupenbagger, Bau-Und Bergbauausrüstung
- Crawler excavators
WESTERN STATES EQUIPMENT
Caterpillar 325 CF, Crawler Excavators, Construction
270,965 
Caterpillar 325 CF, Crawler Excavators, Construction
- Crawler excavators
WHEELER MACHINERY CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.