AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

236-2317 PUMP GP-FUEL INJECTION Type 4 3056E INDUSTRIAL ENGINE


FUEL SYSTEM
PUMP GP-FUEL INJECTION
PUMP GP-FUEL TRANSFER

INDUSTRIAL ENGINE 3056E INDUSTRIAL ENGINE 356
 3056E Industrial Engine 35600001-UP SEBP3643 3056E 356   (2000)

FUEL SYSTEM

PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
236-2317 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
236-2317 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
236-2317 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
236-2317 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
286-4086 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
302-1833 PUMP GP-FUEL INJECTION
 

#SEBP36430360
 

236-2317: PUMP GP-FUEL INJECTION

236-2317 PUMP GP-FUEL INJECTION
Type 4
i02467656 SEBP3643
2362317 PUMP GP-FUEL INJECTION Parts scheme 2362317 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3056E INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4B-4277 [4] WASHER (8.8X17.5X1.6-MM THK)  
2. 6I-0217 M [1] BOLT (M8X1.25X20-MM)  
3. 6I-0291 M [8] NUT (M8X1.25-THD)  
4. 7M-7410 [1] PLUG-PIPE  
5. 100-4830 M [3] BOLT (M10X1.5X20-MM)  
6. 101-3877 [3] STUD (M8X1.25X37-MM)  
7. 114-4363 M [2] BOLT (M8X1.25X12-MM)  
8. 124-3708 [3] CLIP  
9. 145-8327 [1] SEAL-O-RING  
10. 149-2091 [1] SEAL-O-RING  
11. 155-0576 [5] MOUNT-ISOLATION  
12. 162-9992 [3] CLIP  
13. 164-3207 [6] WASHER  
14. 179-7071 [4] BOLT (M8X1.25X20-MM)  
15. 199-9252 [1] SEAL-O-RING  
16. 199-9267 [1] SEAL-O-RING  
17. 199-9751 [2] SEAL-O-RING  
18. 205-3686 [2] STUD (M8X1.25X52-MM)  
19. 271-4055 [1] CONTROL GP-VOLTAGE (12-VOLT)(LOAD PROTECTION)  
  1S-9593 [2] STRAP-CABLE  
  177-9653 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
20. 216-3436 [1] SENSOR GP-TEMPERATURE (AIR INLET)  
21. 216-3446 [1] SENSOR GP-SPEED (TIMING)  
22. 238-0116 C [1] SENSOR GP-PRESSURE (ENGINE OIL)  
23. 238-0114 C [1] SENSOR GP-PRESSURE (AIR INLET)  
24. 216-9786 [6] INJECTOR AS-FUEL  
25. 216-9790 [1] GEAR-FUEL PUMP (68-TEETH)  
26. 216-9826 [1] TUBE AS (CYL NO. 1)  
27. 216-9828 [1] TUBE AS (CYL NO. 2)  
28. 216-9830 [1] TUBE AS (CYL NO. 3)  
29. 216-9831 [1] TUBE AS (CYL NO. 4)  
30. 216-9834 [1] TUBE AS (CYL NO. 5)  
31. 216-9835 [1] TUBE AS (CYL NO. 6)  
32. 217-0099 [2] SPACER (8.2X25X2-MM THK)  
33. 217-0100 [4] SPACER (8.2X12.7X25.4-MM THK)  
34. 221-1018 [1] CONTROL GP-UNPROGRAMMED  
  7X-6315 [1] STRAP AS-GROUND  
  134-4126 [1] WASHER (4.52X8.28X0.76-MM THK)  
  [1] HOUSING  
  [1] SCREW  
35. 228-8943 [1] BRACKET  
36. 228-8960 [1] CLIP  
37. 235-6281 [1] TIE-CABLE  
38. 236-2313 [1] BRACKET  
39. 236-2316 [2] STUD  
40. 228-8953 [1] PUMP GP-FUEL INJECTION  
41. 216-3436 [1] SENSOR GP-TEMPERATURE (BOOST)  
   
    AVAILABLE REPAIR KIT(S):
  278-8678 [1] KIT-SENSOR (LUBRICATION OIL PRESSURE)  
  278-8682 [1] KIT-SENSOR (AIR PRESSURE)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP36430361
 

236-2317: PUMP GP-FUEL INJECTION

236-2317 PUMP GP-FUEL INJECTION
Type 5
i02525904 SEBP3643
2362317 PUMP GP-FUEL INJECTION Parts scheme 2362317 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3056E INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4B-4277 [4] WASHER (8.8X17.5X1.6-MM THK)  
2. 6I-0217 M [1] BOLT (M8X1.25X20-MM)  
3. 6I-0291 M [8] NUT (M8X1.25-THD)  
4. 7M-7410 [1] PLUG-PIPE  
5. 100-4830 M [1] BOLT (M10X1.5X20-MM)  
6. 101-3877 [3] STUD (M8X1.25X37-MM)  
7. 114-4363 CM [1] BOLT (M8X1.25X12-MM)  
8. 124-3708 [3] CLIP  
9. 145-8327 [1] SEAL-O-RING  
10. 149-2091 [1] SEAL-O-RING  
11. 155-0576 [5] MOUNT-ISOLATION  
12. 162-9992 [3] CLIP  
13. 164-3207 [6] WASHER  
14. 179-7071 [4] BOLT (M8X1.25X20-MM)  
15. 199-9252 [1] SEAL-O-RING  
16. 199-9267 [1] SEAL-O-RING  
17. 199-9751 [2] SEAL-O-RING  
19. 271-4055 [1] CONTROL GP-VOLTAGE (12-VOLT)(LOAD PROTECTION)  
  1S-9593 [2] STRAP-CABLE  
  177-9653 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
20. 268-4360 C [1] SENSOR GP-TEMPERATURE (AIR INLET)  
21. 216-3446 [1] SENSOR GP-SPEED (TIMING)  
22. 274-6721 C [1] SENSOR GP-PRESSURE (ENGINE OIL)  
23. 274-6720 C [1] SENSOR GP-PRESSURE (AIR INLET)  
24. 216-9786 [6] INJECTOR AS-FUEL  
25. 216-9790 [1] GEAR-FUEL PUMP (68-TEETH)  
26. 216-9826 [1] TUBE AS (CYL NO. 1)  
27. 216-9828 [1] TUBE AS (CYL NO. 2)  
28. 216-9830 [1] TUBE AS (CYL NO. 3)  
29. 216-9831 [1] TUBE AS (CYL NO. 4)  
30. 216-9834 [1] TUBE AS (CYL NO. 5)  
31. 216-9835 [1] TUBE AS (CYL NO. 6)  
32. 217-0099 [2] SPACER (8.2X25X2-MM THK)  
33. 217-0100 [4] SPACER (8.2X12.7X25.4-MM THK)  
34. 221-1018 [1] CONTROL GP-UNPROGRAMMED  
  7X-6315 [1] STRAP AS-GROUND  
  134-4126 [1] WASHER (4.52X8.28X0.76-MM THK)  
  [1] HOUSING  
  [1] SCREW  
35. 228-8943 [1] BRACKET  
36. 228-8953 [1] PUMP GP-FUEL INJECTION  
37. 268-4360 [1] SENSOR GP-TEMPERATURE (BOOST)  
   
    AVAILABLE REPAIR KIT(S):
  278-8678 [1] KIT-SENSOR (LUBRICATION OIL PRESSURE)  
  278-8682 [1] KIT-SENSOR (AIR PRESSURE)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP36430362
 

286-4086: PUMP GP-FUEL INJECTION

286-4086 PUMP GP-FUEL INJECTION
i02509901 SEBP3643
2864086 PUMP GP-FUEL INJECTION Parts scheme 2864086 PUMP GP-FUEL INJECTION Parts scheme 2864086 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3056E INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 100-4830 M [4] BOLT (M10X1.5X20-MM)  
2. 101-3877 [3] STUD (M8X1.25X37-MM)  
3. 124-3708 [3] CLIP  
4. 145-8327 [1] SEAL-O-RING  
5. 149-2091 [1] SEAL-O-RING  
6. 155-0576 [8] MOUNT-ISOLATION  
7. 162-9992 [3] CLIP  
8. 140-8718 [6] WASHER  
9. 179-7071 [4] BOLT (M8X1.25X20-MM)  
10. 216-3446 [1] SENSOR GP-SPEED (ENGINE TIMING)  
11. 199-9252 [1] SEAL-O-RING  
12. 199-9267 [1] SEAL-O-RING  
13. 199-9751 [2] SEAL-O-RING  
14. 216-9786 [6] INJECTOR AS-FUEL  
15. 216-9790 [1] GEAR-FUEL PUMP (68-TEETH)  
16. 216-9826 [1] TUBE AS (CYL NO. 1)  
17. 216-9828 [1] TUBE AS (CYL NO. 2)  
18. 216-9830 [1] TUBE AS (CYL NO. 3)  
19. 216-9831 [1] TUBE AS (CYL NO. 4)  
20. 216-9834 [1] TUBE AS (CYL NO. 5)  
21. 216-9835 [1] TUBE AS (CYL NO. 6)  
22. 217-0099 [2] SPACER (8.2X25X2-MM THK)  
23. 217-0100 [4] SPACER (8.2X12.7X25.4-MM THK)  
24. 221-1018 [1] CONTROL GP-UNPROGRAMMED  
25. 228-8943 [1] BRACKET  
26. 228-8953 [1] PUMP GP-FUEL INJECTION  
27. 236-2313 [1] BRACKET  
28. 268-4360 [1] SENSOR GP-TEMPERATURE (INTAKE MANIFOLD AIR)  
  137-6645 [1] PAD-CONNECTOR  
28A. 268-4360 [1] SENSOR GP-TEMPERATURE (ENGINE COOLANT)  
  137-6645 [1] PAD-CONNECTOR  
29. 274-6720 [1] SENSOR GP-PRESSURE (INTAKE MANIFOLD AIR)  
30. 274-6721 [1] SENSOR GP-PRESSURE (FUEL)  
31. 286-2890 [2] WASHER  
32. 286-2908 [1] BOLT  
33. 286-2909 [1] CONNECTION  
34. 6I-0217 M [1] BOLT (M8X1.25X20-MM)  
35. 6I-0291 M [8] NUT (M8X1.25-THD)  
36. 7M-7410 [1] PLUG-PIPE  
37. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
38. 114-4363 M [1] BOLT (M8X1.25X12-MM)  
40. 396-6499 [1] CONTROL GP-VOLTAGE (12-VOLT)  
  1S-9593 [2] STRAP-CABLE  
  7T-0093 [4] PIN-CONNECTOR (12-GA TO 14-GA)  
  177-9653 [1] KIT-RECEPTACLE (4-PIN)  
41. 236-5539 [1] CLIP  
42. 236-5535 [1] BRACKET-SUPPORT  
43. 236-5534 [1] BRACKET-MOUNTING  
44. 236-2316 [2] STUD  
45. 235-6281 [1] TIE-CABLE  
46. 228-8960 [1] CLIP  
47. 205-3686 [2] STUD (M8X1.25X52-MM)  
48. 124-3815 M [2] BOLT (M8X1.25X16-MM)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP36430363
 

302-1833: PUMP GP-FUEL INJECTION

302-1833 PUMP GP-FUEL INJECTION
i02645486 SEBP3643
3021833 PUMP GP-FUEL INJECTION Parts scheme 3021833 PUMP GP-FUEL INJECTION Parts scheme 3021833 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3056E INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-0291 M [8] NUT (M8X1.25-THD)  
2. 7M-7410 [1] PLUG-PIPE  
3. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
4. 100-4830 M [3] BOLT (M10X1.5X20-MM)  
5. 101-3877 [3] STUD (M8X1.25X37-MM)  
6. 114-4363 M [2] BOLT (M8X1.25X12-MM)  
7. 124-3708 [3] CLIP  
8. 124-3815 M [2] BOLT (M8X1.25X16-MM)  
9. 145-8327 [1] SEAL-O-RING  
10. 149-2091 [1] SEAL-O-RING  
11. 155-0576 [8] MOUNT-ISOLATION  
12. 162-9992 [3] CLIP  
13. 140-8718 [6] WASHER  
14. 179-7071 [4] BOLT (M8X1.25X20-MM)  
15. 216-3446 [1] SENSOR GP-SPEED (ENGINE TIMING)  
16. 199-9252 [1] SEAL-O-RING  
17. 199-9267 [1] SEAL-O-RING  
18. 199-9751 [2] SEAL-O-RING  
19. 205-3686 [2] STUD (M8X1.25X52-MM)  
20. 216-9786 [6] INJECTOR AS-FUEL  
21. 216-9790 [1] GEAR-FUEL PUMP (68-TEETH)  
22. 216-9826 [1] TUBE AS (CYL NO. 1)  
23. 216-9828 [1] TUBE AS (CYL NO. 2)  
24. 216-9830 [1] TUBE AS (CYL NO. 3)  
25. 216-9831 [1] TUBE AS (CYL NO. 4)  
26. 216-9834 [1] TUBE AS (CYL NO. 5)  
27. 216-9835 [1] TUBE AS (CYL NO. 6)  
28. 217-0099 [2] SPACER (8.2X25X2-MM THK)  
29. 217-0100 [4] SPACER (8.2X12.7X25.4-MM THK)  
30. 221-1018 [1] CONTROL GP-UNPROGRAMMED  
31. 228-8953 [1] PUMP GP-FUEL INJECTION  
32. 228-8960 [1] CLIP  
33. 235-6281 [1] TIE-CABLE  
34. 236-2313 [1] BRACKET  
35. 236-2316 [2] STUD  
36. 236-5535 [1] BRACKET-SUPPORT  
37. 236-5539 [1] CLIP  
38. 268-4360 [1] SENSOR GP-TEMPERATURE (ENGINE COOLANT)  
  137-6645 [1] PAD-CONNECTOR  
38A. 268-4360 [1] SENSOR GP-TEMPERATURE (AIR INLET)  
  137-6645 [1] PAD-CONNECTOR  
39. 396-6499 [1] CONTROL GP-VOLTAGE (12-VOLT)  
  1S-9593 [2] STRAP-CABLE  
  7T-0093 [4] PIN-CONNECTOR (12-GA TO 14-GA)  
  177-9653 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
40. 274-6720 [1] SENSOR GP-PRESSURE (AIR)  
41. 274-6721 [1] SENSOR GP-PRESSURE (OIL)  
42. 302-1830 [1] BRACKET-MOUNTING  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP36430364
 

216-9131: PUMP GP-FUEL TRANSFER

216-9131 PUMP GP-FUEL TRANSFER
S/N 3561-10005
ALSO AN ATTACHMENT
i01836317 SEBP3643
2169131 PUMP GP-FUEL TRANSFER Parts scheme 2169131 PUMP GP-FUEL TRANSFER Parts scheme
  For full view, you need register

Parts for your 3056E INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5C-1777 [3] NUT  
2. 5C-1809 [1] SPACER (8X19X6.5-MM)  
3. 6I-0217 M [1] BOLT (M8X1.25X20-MM)  
4. 6I-0254 M [5] BOLT (M8X1.25X30-MM)  
5. 8N-7983 [1] FITTING  
6. 033-7849 [3] PLUG  
7. 067-6269 [3] FERRULE  
8. 067-6998 [1] NUT (3/8-24-THD)  
9. 067-6999 [1] FERRULE  
10. 100-4461 M [1] BOLT (M10X1.5X50-MM)  
11. 100-4830 M [1] BOLT (M10X1.5X20-MM)  
12. 101-3906 [1] BOLT  
13. 101-3907 [4] WASHER  
14. 101-7178 M [1] BOLT (M10X1.5X55-MM)  
15. 102-9988 [1] SPACER  
16. 127-8162 [2] CLIP  
17. 133-9467 [1] BOLT  
18. 133-9472 [1] CONNECTION  
19. 160-7197 [1] CLIP  
20. 162-2000 [4] WASHER  
21. 218-3915 [1] SPACER  
22. 191-1260 [2] BOLT  
23. 191-5941 [1] TUBE AS  
23A. 102-9986 [1] CLIP  
23B. 067-6269 [2] FERRULE  
24. 191-5942 [1] TUBE AS  
24A. 102-9986 [1] CLIP  
24B. 149-6116 [1] CLIP  
24C. 067-6268 [2] NUT-FUEL LINE  
24D. 067-6269 [2] FERRULE  
25. 191-5943 [1] LINE AS-FUEL  
25A. 101-3986 [1] CLIP  
25B. 224-8679 [1] CLIP  
25C. 101-3983 [1] NUT (3/16)  
25D. 101-3984 [1] FERRULE  
26. 255-2453 [1] PUMP AS-FUEL PRIMING  
26A. 231-4457 [1] GASKET  
27. 216-9053 [1] CONNECTOR  
28. 216-9055 [1] BRACKET  
29. 216-9066 [1] TUBE AS  
29A. 149-6117 [1] CLIP  
29B. 067-6268 [1] NUT-FUEL LINE  
29C. 067-6269 [1] FERRULE  
30. 216-9086 [1] SPACER (10.5X20X32-MM THK)  
31. 216-9092 [2] CONNECTOR-SPECIAL (BANJO)  
32. 216-9110 [1] TUBE AS  
32A. 102-9986 [1] CLIP  
33. 216-9752 [4] WASHER  
34. 217-0721 [1] BOLT-SPECIAL (BANJO)  
  M   METRIC PART
 

#SEBP36430365
 

216-9131: PUMP GP-FUEL TRANSFER

216-9131 PUMP GP-FUEL TRANSFER
S/N 35610006-UP
ALSO AN ATTACHMENT
i02469607 SEBP3643
2169131 PUMP GP-FUEL TRANSFER Parts scheme 2169131 PUMP GP-FUEL TRANSFER Parts scheme
  For full view, you need register

Parts for your 3056E INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5C-1777 [4] NUT  
2. 5C-1809 [1] SPACER (8X19X6.5-MM)  
3. 6I-0217 M [1] BOLT (M8X1.25X20-MM)  
4. 6I-0254 M [5] BOLT (M8X1.25X30-MM)  
5. 8N-7983 [1] FITTING  
6. 033-7849 [3] PLUG  
7. 067-6269 [4] FERRULE  
8. 067-6998 [1] NUT (3/8-24-THD)  
9. 067-6999 [1] FERRULE  
10. 100-4461 M [1] BOLT (M10X1.5X50-MM)  
11. 100-4830 M [1] BOLT (M10X1.5X20-MM)  
12. 101-3906 [1] BOLT  
13. 246-4361 [4] WASHER (10.5X14X1.5-MM THK)  
14. 101-7178 M [1] BOLT (M10X1.5X55-MM)  
15. 102-9988 [1] SPACER  
16. 127-8162 [2] CLIP  
17. 133-9467 [1] BOLT  
18. 133-9472 [1] CONNECTION  
19. 318-2365 [2] CLIP  
20. 241-3359 [7] WASHER-SEALING (13.25X18.45X1.6-MM THK)  
21. 218-3915 [1] SPACER  
22. 191-1260 [2] BOLT  
23. 191-5941 [1] TUBE AS  
23A. 102-9986 [1] CLIP  
23B. 067-6269 [2] FERRULE  
24. 191-5942 [1] TUBE AS  
24A. 102-9986 [1] CLIP  
24B. 149-6116 [1] CLIP  
24C. 067-6268 [2] NUT-FUEL LINE  
24D. 067-6269 [2] FERRULE  
25. 191-5943 [1] LINE AS-FUEL  
25A. 101-3986 [1] CLIP  
25B. 224-8679 [1] CLIP  
25C. 101-3983 [1] NUT (3/16)  
25D. 101-3984 [1] FERRULE  
26. 255-2453 [1] PUMP AS-FUEL PRIMING  
26A. 231-4457 [1] GASKET  
27. 216-9053 [1] CONNECTOR  
28. 216-9055 [1] BRACKET  
29. 216-9066 [1] TUBE AS  
29A. 149-6117 [1] CLIP  
29B. 067-6268 [1] NUT-FUEL LINE  
29C. 067-6269 [1] FERRULE  
30. 216-9086 [1] SPACER (10.5X20X32-MM THK)  
31. 216-9092 C [2] CONNECTOR-SPECIAL (BANJO)  
32. 216-9110 [1] TUBE AS  
32A. 102-9986 [1] CLIP  
33. 6I-0593 M [2] BOLT (M10X1.5X30-MM)  
34. 217-0721 [1] BOLT-SPECIAL (BANJO)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP36430366
 

219-2455: PUMP GP-FUEL TRANSFER

219-2455 PUMP GP-FUEL TRANSFER
S/N 3561-423
ALSO AN ATTACHMENT
i01725072 SEBP3643
2192455 PUMP GP-FUEL TRANSFER Parts scheme 2192455 PUMP GP-FUEL TRANSFER Parts scheme
  For full view, you need register

Parts for your 3056E INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5C-1777 [5] NUT  
2. 6I-0217 M [1] BOLT (M8X1.25X20-MM)  
3. 6I-0254 M [4] BOLT (M8X1.25X30-MM)  
4. 6I-1090 M [1] BOLT (M8X1.25X40-MM)  
5. 033-7849 [1] PLUG  
6. 067-6269 [4] FERRULE  
7. 100-4830 M [3] BOLT (M10X1.5X20-MM)  
8. 101-3906 [1] BOLT  
9. 101-3907 [2] WASHER  
10. 101-7178 M [1] BOLT (M10X1.5X55-MM)  
11. 102-9988 [1] SPACER  
12. 127-8162 [1] CLIP  
13. 162-2000 [1] WASHER  
14. 216-9043 [1] PUMP AS-FUEL TRANSFER  
14A. 231-4457 [1] GASKET  
15. 216-9053 [1] CONNECTOR  
16. 216-9086 [1] SPACER (10.5X20X32-MM THK)  
17. 216-9092 [1] CONNECTOR-SPECIAL (BANJO)  
18. 216-9752 [4] WASHER  
19. 217-0721 [1] BOLT-SPECIAL (BANJO)  
20. 219-2443 [1] TUBE AS  
20A. 102-9986 [1] CLIP  
20B. 067-6268 [1] NUT-FUEL LINE  
20C. 067-6269 [1] FERRULE  
21. 219-2450 [1] BRACKET  
22. 219-2451 [1] CONNECTOR-SPECIAL (BANJO)  
23. 219-2452 [1] BALL  
24. 219-2453 [1] TUBE AS  
24A. 149-6117 [1] CLIP  
25. 223-5418 [1] TUBE AS  
25A. 067-6268 [2] NUT-FUEL LINE  
25B. 067-6269 [2] FERRULE  
25C. 102-9986 [1] CLIP  
25D. 102-9987 [1] CLIP  
  M   METRIC PART
 

#SEBP36430367
 

219-2455: PUMP GP-FUEL TRANSFER

219-2455 PUMP GP-FUEL TRANSFER
S/N 356424-UP
ALSO AN ATTACHMENT
i02062542 SEBP3643
2192455 PUMP GP-FUEL TRANSFER Parts scheme 2192455 PUMP GP-FUEL TRANSFER Parts scheme
  For full view, you need register

Parts for your 3056E INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5C-1777 C [3] NUT  
2. 6I-0217 M [1] BOLT (M8X1.25X20-MM)  
3. 6I-0254 M [4] BOLT (M8X1.25X30-MM)  
4. 6I-1090 M [1] BOLT (M8X1.25X40-MM)  
5. 033-7849 [1] PLUG  
6. 067-6269 C [3] FERRULE  
7. 100-4830 M [3] BOLT (M10X1.5X20-MM)  
8. 101-3906 [1] BOLT  
9. 101-3907 [2] WASHER  
10. 101-7178 M [1] BOLT (M10X1.5X55-MM)  
11. 102-9988 [1] SPACER  
12. 127-8162 [1] CLIP  
13. 162-2000 [1] WASHER  
14. 216-9043 [1] PUMP AS-FUEL TRANSFER  
14A. 231-4457 [1] GASKET  
15. 216-9053 [1] CONNECTOR  
16. 216-9086 [1] SPACER (10.5X20X32-MM THK)  
17. 216-9092 [2] CONNECTOR-SPECIAL (BANJO)  
18. 216-9752 [4] WASHER  
19. 217-0721 [1] BOLT-SPECIAL (BANJO)  
20. 219-2443 [1] TUBE AS  
20A. 102-9986 [1] CLIP  
20B. 067-6268 [1] NUT-FUEL LINE  
20C. 067-6269 [1] FERRULE  
21. 219-2450 [1] BRACKET  
24. 219-2453 [1] TUBE AS  
24A. 149-6117 [1] CLIP  
25. 223-5418 [1] TUBE AS  
25A. 067-6268 [2] NUT-FUEL LINE  
25B. 067-6269 [2] FERRULE  
25C. 102-9986 [1] CLIP  
25D. 102-9987 [1] CLIP  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP36430368
 

220-7165: PUMP GP-FUEL TRANSFER

220-7165 PUMP GP-FUEL TRANSFER
AN ATTACHMENT
i01755850 SEBP3643
2207165 PUMP GP-FUEL TRANSFER Parts scheme 2207165 PUMP GP-FUEL TRANSFER Parts scheme
  For full view, you need register

Parts for your 3056E INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5C-1777 [6] NUT  
2. 6I-0217 M [1] BOLT (M8X1.25X20-MM)  
3. 6I-0254 M [7] BOLT (M8X1.25X30-MM)  
4. 6I-1090 M [1] BOLT (M8X1.25X40-MM)  
5. 067-6269 [4] FERRULE  
6. 101-3906 [1] BOLT  
7. 101-3907 [2] WASHER  
8. 101-7178 M [1] BOLT (M10X1.5X55-MM)  
9. 102-9988 [1] SPACER  
10. 127-8162 [1] CLIP  
11. 255-2453 [1] PUMP AS-FUEL PRIMING  
12. 231-4457 [1] GASKET  
13. 216-9053 [1] CONNECTOR  
14. 216-9086 [1] SPACER (10.5X20X32-MM THK)  
15. 216-9092 [1] CONNECTOR-SPECIAL (BANJO)  
16. 216-9752 [4] WASHER  
17. 217-0721 [1] BOLT-SPECIAL (BANJO)  
18. 219-2443 [1] TUBE AS  
21. 102-9986 [1] CLIP  
22. 216-9092 [1] CONNECTOR-SPECIAL (BANJO)  
23. 219-2452 [1] BALL  
24. 219-2453 [1] TUBE AS  
25. 149-6117 [1] CLIP  
26. 220-7162 [1] TUBE AS  
29. 102-9987 [1] CLIP  
30. 220-7163 [1] CLIP  
  M   METRIC PART
 

#SEBP36430369
 

236-5531: PUMP GP-FUEL TRANSFER

236-5531 PUMP GP-FUEL TRANSFER
Type 1
i01956466 SEBP3643
2365531 PUMP GP-FUEL TRANSFER Parts scheme 2365531 PUMP GP-FUEL TRANSFER Parts scheme
  For full view, you need register

Parts for your 3056E INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5C-1777 [4] NUT  
2. 6I-0217 M [2] BOLT (M8X1.25X20-MM)  
3. 6I-0254 M [5] BOLT (M8X1.25X30-MM)  
4. 6I-0456 M [1] BOLT (M8X1.25X45-MM)  
5. 6I-0654 M [2] BOLT (M10X1.5X25-MM)  
6. 6I-1090 M [1] BOLT (M8X1.25X40-MM)  
7. 033-7849 [1] PLUG  
8. 067-6269 [3] FERRULE  
9. 101-3906 [1] BOLT  
10. 101-3907 [2] WASHER  
11. 101-7178 M [1] BOLT (M10X1.5X55-MM)  
12. 102-9988 [1] SPACER  
13. 114-2589 [1] NUT  
14. 114-4363 M [3] BOLT (M8X1.25X12-MM)  
15. 127-8162 [2] CLIP  
16. 162-2000 [1] WASHER  
17. 255-2453 [1] PUMP AS-FUEL PRIMING  
17A. 231-4457 [1] GASKET  
18. 216-9053 [1] CONNECTOR  
19. 216-9086 [1] SPACER (10.5X20X32-MM THK)  
20. 216-9092 [1] CONNECTOR-SPECIAL (BANJO)  
21. 216-9752 [4] WASHER  
22. 217-0721 [1] BOLT-SPECIAL (BANJO)  
23. 219-2451 [1] CONNECTOR-SPECIAL (BANJO)  
24. 219-2452 [1] BALL  
25. 224-8978 [1] FITTING-COMPRESSION  
26. 236-5517 [1] TUBE AS  
26A. 7W-4688 [1] CLIP  
26B. 067-6269 [2] FERRULE  
26C. 149-6116 [1] CLIP  
26D. 220-7163 [1] CLIP  
27. 236-5523 [1] TUBE AS  
27A. 067-6269 [1] FERRULE  
27B. 102-9986 [1] CLIP  
28. 236-5524 [1] LINE AS-FUEL  
28A. 149-6117 [1] CLIP  
29. 236-5525 [1] BRACKET  
30. 236-5529 [1] SHIELD  
  M   METRIC PART
 

Information:

Engine News
Installation of Fuel Injection Pump {1251}
2007/12/10
Support for Fuel Injection Pumps {1251}
2008/07/14
Locking Screw for the Fuel Injection Pump on 3054E and 3056E Engines {1251, 1290}
2010/03/31
Fuel Injection Nozzles for 3056E Engines {1251, 1290}
2010/04/26
Fuel Injection Pump Mounting Flange on Certain 3056E Engines {1251, 1290}
2011/09/29
Operation and Maintenance Manual
Fuel Injection Nozzles - Test/Exchange
3054E and 3056E Industrial Engines
Special Instruction
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Technical Information Bulletin
Replace Failed 3054E and 3056E Fuel Injection Pumps with New Pumps from Cat Parts
Replace Failed 3054E and 3056E Fuel Injection Pumps with New Pumps from Cat Parts
Troubleshooting the Fuel Injection System For 3054 and 3056 Engines {1251, 1252}
Troubleshooting the Fuel Injection System For 3054 and 3056 Engines {1251, 1252}
Specifications
Fuel Injection Nozzles
3056E Industrial Engine
Fuel Injection Pump
3056E Industrial Engine
Systems Operation
Fuel Injection
3056E Industrial Engine
Reuse And Salvage Guidelines
Reuse and Salvage for Fuel Injection Pumps and Nozzles on 3044, 3046, 3064, and 3066 Engines {1251}
Reuse and Salvage for Fuel Injection Pumps and Nozzles on 3044, 3046, 3064, and 3066 Engines {1251}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Testing and Adjusting
Fuel Injection Nozzle - Test
3056E Industrial Engine
Fuel Injection Timing - Check
3056E Industrial Engine
Troubleshooting
CID 1627 FMI 03
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines
CID 1684 FMI 00
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines
CID 1684 FMI 02
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines
CID 1684 FMI 03
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines
CID 1684 FMI 04
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines
CID 1684 FMI 05
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines
CID 1684 FMI 07
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines
CID 1684 FMI 08
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines
CID 1684 FMI 09
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines
CID 1684 FMI 10
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines
CID 1684 FMI 11
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines
CID 1684 FMI 12
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines
CID 1684 FMI 14
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines
Fuel Injection Pump Circuit - Test
3054E and 3056E Industrial Engines and Engines for Caterpillar Built Machines
Disassembly and Assembly
Fuel Injection Nozzles - Remove
3056E Industrial Engine
Fuel Injection Nozzles - Install
3056E Industrial Engine
Fuel Injection Pump - Remove
3056E Industrial Engine
Fuel Injection Pump - Install
3056E Industrial Engine
Voltage Load Protection Module - Remove and Install
3056E Industrial Engine
Service Magazine
New Improved Voltage Load Protection Module (VLPM) {1251}
2005/12/19
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14

Caterpillar Parts SIS Catalog 3056E :

PUMP GP-FUEL INJECTION
236-2317 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
236-2317 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
236-2317 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
235-6331 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
235-6331 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
235-6331 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
228-8965 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
228-8965 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
236-2317 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
286-4086 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
302-1833 PUMP GP-FUEL INJECTION
PUMP GP-FUEL TRANSFER
216-9131 PUMP GP-FUEL TRANSFER
PUMP GP-FUEL TRANSFER
216-9131 PUMP GP-FUEL TRANSFER
PUMP GP-FUEL TRANSFER
219-2455 PUMP GP-FUEL TRANSFER
PUMP GP-FUEL TRANSFER
219-2455 PUMP GP-FUEL TRANSFER
PUMP GP-FUEL TRANSFER
220-7165 PUMP GP-FUEL TRANSFER

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.