AVSPARE.COM
parts catalog

3054E Industrial Engine 30400001-UP BASIC ENGINE Caterpillar SIS




Parts group 3054E:

  For full view, you need register
BASIC ENGINE

Information:

(For parts list, see above)

Engine News
Operation and Maintenance Manual
Air Compressor - Inspect
3054E and 3056E Industrial Engines
Disassembly and Assembly
Specifications
Balancer - If Equipped
3054E Industrial Engine
Disassembly and Assembly
Engine News
Specifications
Camshaft
3054E Industrial Engine
Reuse And Salvage Guidelines
Reuse and Salvage for Camshafts {1210, 1210}
Reuse and Salvage for Camshafts {1210, 1210}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Testing and Adjusting
Excessive Bearing Wear - Inspect
3054E Industrial Engine
Disassembly and Assembly
Camshaft - Remove and Install
3054E Industrial Engine
Camshaft Gear - Remove and Install
3054E Industrial Engine
Operation and Maintenance Manual
Power Take-Off Clutch - Check/Adjust/Lubricate
3054E and 3056E Industrial Engines
Engaging the Driven Equipment
3054E and 3056E Industrial Engines
Engine News
Specifications
Crankshaft Seals
3054E Industrial Engine
Crankshaft - Steel Crankshaft
3054E Industrial Engine
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Testing and Adjusting
Excessive Bearing Wear - Inspect
3054E Industrial Engine
Main Bearings - Inspect
3054E Industrial Engine
Disassembly and Assembly
Bearing Clearance - Check
3054E Industrial Engine
Crankshaft Rear Seal - Install
3054E Industrial Engine
Crankshaft Front Seal - Remove
3054E Industrial Engine
Crankshaft Front Seal - Install
3054E Industrial Engine
Crankshaft - Install
3054E Industrial Engine
Crankshaft - Remove
3054E Industrial Engine
Crankshaft Rear Seal - Remove
3054E Industrial Engine
Service Magazine
Engine News
Special Instruction
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Specifications
Cylinder Block
3054E Industrial Engine
Piston Cooling Jet
3054E Industrial Engine
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3000 Engine Series Cylinder Blocks {1201}
Reuse and Salvage for 3000 Engine Series Cylinder Blocks {1201}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Testing and Adjusting
Excessive Bearing Wear - Inspect
3054E Industrial Engine
Main Bearings - Inspect
3054E Industrial Engine
Cylinder Block - Inspect
3054E Industrial Engine
Disassembly and Assembly
Bearing Clearance - Check
3054E Industrial Engine
Engine News
Operation and Maintenance Manual
Engine Valve Lash - Inspect/Adjust
3054E and 3056E Industrial Engines
Special Instruction
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Specifications
Cylinder Head Valves
3054E Industrial Engine
Cylinder Head
3054E Industrial Engine
Fuel Injection Nozzles
3054E Industrial Engine
Tool Operating Manual
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Testing and Adjusting
Valve Guide - Inspect
3054E Industrial Engine
Engine Valve Lash - Inspect/Adjust
3054E Industrial Engine
Fuel Injection Nozzle - Test
3054E Industrial Engine
Cylinder Head - Inspect
3054E Industrial Engine
Disassembly and Assembly
Cylinder Head - Remove
3054E Industrial Engine
Cylinder Head - Install
3054E Industrial Engine
Operation and Maintenance Manual
Crankshaft Vibration Damper - Inspect
3054E and 3056E Industrial Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Disassembly and Assembly
Specifications
Fan Drive
3054E Industrial Engine
Disassembly and Assembly
Fan Drive - Remove and Install
3054E Industrial Engine
Special Instruction
Oil and Your Engine {1000}
Oil and Your Engine {1000}
Systems Operation
Introduction
3054E Industrial Engine
Service Magazine
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Reuse And Salvage Guidelines
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Specifications
Flywheel Housing
3054E Industrial Engine
Flywheel
3054E Industrial Engine
Reuse And Salvage Guidelines
Reuse and Salvage for Flywheel Assemblies {1156}
Reuse and Salvage for Flywheel Assemblies {1156}
Testing and Adjusting
Flywheel - Inspect
3054E Industrial Engine
Disassembly and Assembly
Flywheel - Remove
3054E Industrial Engine
Flywheel - Install
3054E Industrial Engine
Engine News
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR SAMPLING THE ENGINE OIL AND IF NECESSARY REPLACING THE IDLER GEAR ASSEMBLY ON 3054C, 3054E, AND 3056E ENGINES INDUSTRIAL ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR SAMPLING THE ENGINE OIL AND IF NECESSARY REPLACING THE IDLER GEAR ASSEMBLY ON 3054C, 3054E, AND 3056E ENGINES INDUSTRIAL ENGINES
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Idler Gear Hub Failures on 3054C, 3054E, and 3056E Engines
Idler Gear Hub Failures on 3054C, 3054E, and 3056E Engines
Specifications
Gear Group (Front)
3054E Industrial Engine
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR SAMPLING THE ENGINE OIL AND IF NECESSARY REPLACING THE IDLER GEAR ASSEMBLY ON 3054C, 3054E, AND 3056E ENGINES INDUSTRIAL ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR SAMPLING THE ENGINE OIL AND IF NECESSARY REPLACING THE IDLER GEAR ASSEMBLY ON 3054C, 3054E, AND 3056E ENGINES INDUSTRIAL ENGINES
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR SAMPLING THE ENGINE OIL AND IF NECESSARY REPLACING THE IDLER GEAR ASSEMBLY ON 3054C, 3054E, AND 3056E ENGINES INDUSTRIAL ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR SAMPLING THE ENGINE OIL AND IF NECESSARY REPLACING THE IDLER GEAR ASSEMBLY ON 3054C, 3054E, AND 3056E ENGINES INDUSTRIAL ENGINES
Testing and Adjusting
Gear Group - Inspect
3054E Industrial Engine
Disassembly and Assembly
Idler Gear (Front) - Remove
3054E Industrial Engine
Idler Gear (Front) - Disassemble
3054E Industrial Engine
Idler Gear (Front) - Assemble
3054E Industrial Engine
Idler Gear (Front) - Install
3054E Industrial Engine
Specifications
Flywheel Housing
3054E Industrial Engine
Testing and Adjusting
Flywheel Housing - Inspect
3054E Industrial Engine
Disassembly and Assembly
Engine News
Specifications
Crankshaft Seals
3054E Industrial Engine
Front Housing and Covers
3054E Industrial Engine
Disassembly and Assembly
Front Cover - Remove and Install
3054E Industrial Engine
Housing (Front) - Remove
3054E Industrial Engine
Housing (Front) - Install
3054E Industrial Engine
Specifications
Engine Lifting Bracket
3054E Industrial Engine
Operation and Maintenance Manual
Overhaul Considerations
3054E and 3056E Industrial Engines
Engine Mounts - Inspect
3054E and 3056E Industrial Engines
Specifications
Engine Oil Pan
3054E Industrial Engine
Disassembly and Assembly
Engine News
Special Instruction
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Technical Information Bulletin
Specifications
Piston Cooling Jet
3054E Industrial Engine
Piston and Rings
3054E Industrial Engine
Tool Operating Manual
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Reuse And Salvage Guidelines
Reuse and Salvage for Connecting Rods {1218}
Reuse and Salvage for Connecting Rods {1218}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Testing and Adjusting
Excessive Bearing Wear - Inspect
3054E Industrial Engine
Compression - Test
3054E Industrial Engine
Piston Ring Groove - Inspect
3054E Industrial Engine
Connecting Rod Bearings - Inspect
3054E Industrial Engine
Connecting Rod - Inspect
3054E Industrial Engine
Piston Height - Inspect
3054E Industrial Engine
Disassembly and Assembly
Bearing Clearance - Check
3054E Industrial Engine
Connecting Rod Bearings - Remove
3054E Industrial Engine
Connecting Rod Bearings - Install
3054E Industrial Engine
Operation and Maintenance Manual
Power Take-Off Clutch - Check/Adjust/Lubricate
3054E and 3056E Industrial Engines
Engaging the Driven Equipment
3054E and 3056E Industrial Engines
Engine News
Operation and Maintenance Manual
Crankshaft Vibration Damper - Inspect
3054E and 3056E Industrial Engines
Specifications
Crankshaft Pulley
3054E Industrial Engine
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Disassembly and Assembly
Special Instruction
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
NEHS0566 <NOBR> 4C-9832</NOBR> Large Engine Roll-Over Stand {0599, 0701}
NEHS0566 4C-9832 Large Engine Roll-Over Stand {0599, 0701}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Magazine
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Operation and Maintenance Manual
Alternator and Fan Belts - Inspect/Adjust/Replace
3054E and 3056E Industrial Engines
Disassembly and Assembly
V-Belts - Remove and Install
3054E Industrial Engine
Engine News
Operation and Maintenance Manual
Engine Valve Lash - Inspect/Adjust
3054E and 3056E Industrial Engines
Specifications
Lifter Group
3054E Industrial Engine
Rocker Shaft
3054E Industrial Engine
Valve Mechanism Cover
3054E Industrial Engine
Reuse And Salvage Guidelines
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Testing and Adjusting
Valve Depth - Inspect
3054E Industrial Engine
Valve Guide - Inspect
3054E Industrial Engine
Engine Valve Lash - Inspect/Adjust
3054E Industrial Engine
Disassembly and Assembly
Lifter Group - Remove and Install
3054E Industrial Engine
Rocker Shaft and Pushrod - Remove
3054E Industrial Engine
Rocker Shaft and Pushrod - Install
3054E Industrial Engine
Rocker Shaft - Disassemble
3054E Industrial Engine
Rocker Shaft - Assemble
3054E Industrial Engine

Truck sale:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. CatĀ® and CaterpillarĀ® are registered trademarks of Caterpillar, Inc.