252-6334 FILTER GP-WATER SEP & FUEL PART OF 260-3128 FILTER & LINES GP-FUEL 3054E INDUSTRIAL ENGINE



FUEL SYSTEM
FILTER GP-FUEL
PUMP GP-FUEL PRIMING
PUMP GP-FUEL INJECTION

INDUSTRIAL ENGINE 3054E INDUSTRIAL ENGINE 304
 3054E Industrial Engine 30400001-UP SEBP3645 3054E 304   (2001)

FUEL SYSTEM

FILTER GP-FUEL
FILTER GP-FUEL
267-5621 FILTER GP-FUEL
FILTER GP-FUEL
441-5108 FILTER GP-FUEL
FILTER GP-WATER SEP & FUEL
252-6334 FILTER GP-WATER SEP & FUEL
PUMP GP-FUEL PRM & PRIM FILTER
234-3039 PUMP GP-FUEL PRM & PRIM FILTER
PUMP GP-FUEL PRM & PRIM FILTER
234-3039 PUMP GP-FUEL PRM & PRIM FILTER
PUMP GP-FUEL PRM & PRIM FILTER
235-5283 PUMP GP-FUEL PRM & PRIM FILTER
 

#SEBP36450370
 

252-6334: FILTER GP-WATER SEP & FUEL

252-6334 FILTER GP-WATER SEP & FUEL
PART OF 260-3128 FILTER & LINES GP-FUEL
i02297923 SEBP3645
2526334 FILTER GP-WATER SEP & FUEL Parts scheme
  For full view, you need register

Parts for your 3054E INDUSTRIAL ENGINE:

Pos. Part No Qty Parts name Comments
1. 441-5111 [1] FILTER AS-FUEL (FUEL FILTER, WATER SEPARATOR)  
 

#SEBP36450371
 

467-7011: KIT-FUEL PRIMING PUMP

467-7011 KIT-FUEL PRIMING PUMP
PART OF 235-5283 PUMP GP-FUEL PRM & PRIM FILTER
i05983214 SEBP3645
  For full view, you need register

Parts for your 3054E INDUSTRIAL ENGINE:

Pos. Part No Qty Parts name Comments
  386-0189 Y [1] FILTER AS-FUEL (12V)  
  434-2751 Y [1] HARNESS AS-PUMP  
  Y   SEPARATE ILLUSTRATION
 

#SEBP36450372
 

232-3267: PUMP GP-FUEL INJECTION

232-3267 PUMP GP-FUEL INJECTION
Type 1
ALSO AN ATTACHMENT
i01907486 SEBP3645
2323267 PUMP GP-FUEL INJECTION Parts scheme 2323267 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3054E INDUSTRIAL ENGINE:

Pos. Part No Qty Parts name Comments
1. 4B-4277 [4] WASHER (8.8X17.5X1.6-MM THK)  
2. 6I-0217 M [1] BOLT (M8X1.25X20-MM)  
3. 6I-0260 M [3] BOLT (M8X1.25X25-MM)  
4. 6I-0291 M [1] NUT (M8X1.25-THD)  
5. 6I-1090 M [2] BOLT (M8X1.25X40-MM)  
6. 7M-7410 [1] PLUG-PIPE  
7. 9F-2247 [1] PLUG-PIPE  
8. 100-4830 M [1] BOLT (M10X1.5X20-MM)  
9. 114-4363 M [1] BOLT (M8X1.25X12-MM)  
10. 124-3815 M [1] BOLT (M8X1.25X16-MM)  
11. 140-8714 [1] CLIP  
12. 145-8327 [1] SEAL-O-RING  
13. 149-2091 [1] SEAL-O-RING  
14. 155-0576 [8] MOUNT-ISOLATION  
15. 179-7071 [4] BOLT (M8X1.25X20-MM)  
16. 199-9252 [1] SEAL-O-RING  
17. 199-9267 [1] SEAL-O-RING  
18. 199-9751 [2] SEAL-O-RING  
19. 271-4055 [1] CONTROL GP-VOLTAGE (12-VOLT)(LOAD PROTECTION)  
  1S-9593 [2] STRAP-CABLE  
  7T-0093 [4] PIN-CONNECTOR (12-GA TO 14-GA)  
  177-9653 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
20. 268-4360 [1] SENSOR GP-TEMPERATURE (ENGINE COOLANT)  
  137-6645 [1] PAD-CONNECTOR  
21. 268-4360 [1] SENSOR GP-TEMPERATURE (AIR INLET)  
  137-6645 [1] PAD-CONNECTOR  
22. 216-3446 [1] SENSOR GP-SPEED (ENGINE TIMING)  
24. 217-0100 [4] SPACER (8.2X12.7X25.4-MM THK)  
25. 221-1018 [1] CONTROL GP-UNPROGRAMMED  
26. 226-8776 [4] INJECTOR AS-FUEL  
    (EACH INCLUDES)
26A. 232-2724 [1] NOZZLE  
26B. 140-8718 [1] WASHER  
28. 232-2720 [1] TUBE AS (CYL NO. 1)(NO.1)  
29. 232-2721 [1] TUBE AS (CYL NO. 2)(NO.2)  
30. 232-2722 [1] TUBE AS (CYL NO. 3)(NO.3)  
31. 232-2723 [1] TUBE AS (CYL NO. 4)(NO.4)  
32. 232-2725 [2] CLIP  
33. 232-2726 [1] CLIP  
34. 232-3149 [3] WASHER (8.35X16.85X1.55-MM THK)  
35. 232-3156 [1] GEAR-FUEL PUMP (68-TEETH)  
36. 232-3157 [1] BRACKET  
37. 238-8671 [4] CLAMP-INJECTOR  
38. 232-3168 [1] BRACKET-SUPPORT  
40. 232-3274 M [4] BOLT (M8X1.25X48.1-MM)  
41. 225-5173 [1] PUMP GP-FUEL INJECTION  
42. 6I-0456 M [2] BOLT (M8X1.25X45-MM)  
43. 217-0099 [2] SPACER (8.2X25X2-MM THK)  
44. 274-6720 [1] SENSOR GP-PRESSURE (AIR)  
45. 274-6721 [1] SENSOR GP-PRESSURE (ENGINE OIL)  
   
  278-8682 F [1] KIT-SENSOR (AIR PRESSURE)  
  278-8678 F [1] KIT-SENSOR (LUBRICATION OIL PRESSURE)  
  F   NOT SHOWN
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP36450373
 

232-3267: PUMP GP-FUEL INJECTION

232-3267 PUMP GP-FUEL INJECTION
Type 2
ALSO AN ATTACHMENT
i02829529 SEBP3645
2323267 PUMP GP-FUEL INJECTION Parts scheme 2323267 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3054E INDUSTRIAL ENGINE:

Pos. Part No Qty Parts name Comments
1. 4B-4277 [4] WASHER (8.8X17.5X1.6-MM THK)  
2. 6I-0217 M [1] BOLT (M8X1.25X20-MM)  
3. 6I-0260 M [3] BOLT (M8X1.25X25-MM)  
4. 6I-0291 M [1] NUT (M8X1.25-THD)  
6. 7M-7410 [1] PLUG-PIPE  
7. 9F-2247 [1] PLUG-PIPE  
8. 100-4830 M [1] BOLT (M10X1.5X20-MM)  
9. 114-4363 M [1] BOLT (M8X1.25X12-MM)  
10. 124-3815 M [1] BOLT (M8X1.25X16-MM)  
11. 140-8714 [1] CLIP  
12. 332-7549 [1] SEAL-O-RING  
13. 149-2091 [1] SEAL-O-RING  
14. 300-6714 C [8] MOUNT  
15. 179-7071 [4] BOLT (M8X1.25X20-MM)  
16. 199-9252 [1] SEAL-O-RING  
17. 199-9267 [1] SEAL-O-RING  
18. 199-9751 [2] SEAL-O-RING  
19. 396-6499 [1] CONTROL GP-VOLTAGE (12-VOLT)(LOAD PROTECTION)  
  1S-9593 [2] STRAP-CABLE  
  7T-0093 [4] PIN-CONNECTOR (12-GA TO 14-GA)  
  177-9653 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
20. 268-4360 [1] SENSOR GP-TEMPERATURE (ENGINE COOLANT)  
  137-6645 [1] PAD-CONNECTOR  
21. 268-4360 [1] SENSOR GP-TEMPERATURE (AIR INLET)  
  137-6645 [1] PAD-CONNECTOR  
22. 216-3446 [1] SENSOR GP-SPEED (ENGINE TIMING)  
24. 217-0100 [4] SPACER (8.2X12.7X25.4-MM THK)  
25. 221-1018 [1] CONTROL GP-UNPROGRAMMED  
26. 226-8776 [4] INJECTOR AS-FUEL  
    (EACH INCLUDES)
26A. 232-2724 [1] NOZZLE  
26B. 140-8718 [1] WASHER  
26C. 275-1038 [1] SEAL-O-RING  
28. 232-2720 [1] TUBE AS (CYL NO. 1)  
29. 232-2721 [1] TUBE AS (CYL NO. 2)  
30. 232-2722 [1] TUBE AS (CYL NO. 3)  
31. 232-2723 [1] TUBE AS (CYL NO. 4)  
32. 232-2725 [2] CLIP  
33. 232-2726 [1] CLIP  
34. 232-3149 [3] WASHER (8.35X16.85X1.55-MM THK)  
35. 232-3156 [1] GEAR-FUEL PUMP (68-TEETH)  
36. 232-3157 [1] BRACKET  
37. 238-8671 [4] CLAMP-INJECTOR  
38. 232-3168 [1] BRACKET-SUPPORT  
40. 232-3274 M [4] BOLT (M8X1.25X48.1-MM)  
41. 225-5173 [1] PUMP GP-FUEL INJECTION  
42. 6I-0456 M [4] BOLT (M8X1.25X45-MM)  
43. 217-0099 [2] SPACER (8.2X25X2-MM THK)  
44. 274-6720 [1] SENSOR GP-PRESSURE (AIR)  
45. 274-6721 [1] SENSOR GP-PRESSURE (ENGINE OIL)  
   
  278-8682 F [1] KIT-SENSOR (AIR PRESSURE)  
  278-8678 F [1] KIT-SENSOR (LUBRICATION OIL PRESSURE)  
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP36450374
 

234-2919: PUMP GP-FUEL INJECTION

234-2919 PUMP GP-FUEL INJECTION
S/N 3041-339
ALSO AN ATTACHMENT
i01889968 SEBP3645
2342919 PUMP GP-FUEL INJECTION Parts scheme 2342919 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3054E INDUSTRIAL ENGINE:

Pos. Part No Qty Parts name Comments
1. 4B-4277 [4] WASHER (8.8X17.5X1.6-MM THK)  
2. 6I-0217 M [1] BOLT (M8X1.25X20-MM)  
3. 6I-0260 M [3] BOLT (M8X1.25X25-MM)  
4. 6I-0291 M [1] NUT (M8X1.25-THD)  
5. 6I-1090 M [2] BOLT (M8X1.25X40-MM)  
6. 7M-7410 [1] PLUG-PIPE  
7. 9F-2247 [1] PLUG-PIPE  
8. 100-4830 M [1] BOLT (M10X1.5X20-MM)  
9. 114-4363 M [1] BOLT (M8X1.25X12-MM)  
10. 124-3815 M [1] BOLT (M8X1.25X16-MM)  
11. 145-8327 [1] SEAL-O-RING  
12. 149-2091 [1] SEAL-O-RING  
13. 155-0576 [8] MOUNT-ISOLATION  
14. 179-7071 [4] BOLT (M8X1.25X20-MM)  
15. 199-9252 [1] SEAL-O-RING  
16. 199-9267 [1] SEAL-O-RING  
17. 199-9751 [2] SEAL-O-RING  
18. 216-2621 [1] CONTROL GP-VOLTAGE (LOAD PROTECTION)  
19. 216-3436 [1] SENSOR GP-TEMPERATURE (ENGINE COOLANT)  
19A. 216-3436 [1] SENSOR GP-TEMPERATURE (AIR INLET)  
20. 216-3446 [1] SENSOR GP-SPEED (ENGINE TIMING)  
21. 216-3448 [1] SENSOR GP-PRESSURE (ENGINE OIL)  
22. 216-3450 [1] SENSOR GP-PRESSURE (BOOST)  
23. 217-0100 [4] SPACER (8.2X12.7X25.4-MM THK)  
24. 221-1018 [1] CONTROL GP-UNPROGRAMMED  
26. 232-2720 [1] TUBE AS (CYL NO. 1)(NO.1)  
27. 232-2721 [1] TUBE AS (CYL NO. 2)(NO.2)  
28. 232-2722 [1] TUBE AS (CYL NO. 3)(NO.3)  
29. 232-2723 [1] TUBE AS (CYL NO. 4)(NO.4)  
30. 232-2725 [2] CLIP  
31. 232-2726 [1] CLIP  
32. 232-3149 [3] WASHER (8.35X16.85X1.55-MM THK)  
33. 232-3156 [1] GEAR-FUEL PUMP (68-TEETH)  
34. 232-3157 [1] BRACKET  
35. 232-3158 [4] CLAMP-INJECTOR  
36. 232-3168 [1] BRACKET-SUPPORT  
37. 232-3274 M [4] BOLT (M8X1.25X48.1-MM)  
38. 234-2906 [1] INJECTOR AS-FUEL  
38A. 140-8718 [1] WASHER  
38B. 234-2900 [1] NOZZLE  
39. 225-5173 [1] PUMP GP-FUEL INJECTION  
40. 6I-0456 M [2] BOLT (M8X1.25X45-MM)  
41. 217-0099 [2] SPACER (8.2X25X2-MM THK)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP36450375
 

234-2919: PUMP GP-FUEL INJECTION

234-2919 PUMP GP-FUEL INJECTION
S/N 304340-UP
Type 1
ALSO AN ATTACHMENT
i02049480 SEBP3645
2342919 PUMP GP-FUEL INJECTION Parts scheme 2342919 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3054E INDUSTRIAL ENGINE:

Pos. Part No Qty Parts name Comments
1. 4B-4277 [4] WASHER (8.8X17.5X1.6-MM THK)  
2. 6I-0217 M [1] BOLT (M8X1.25X20-MM)  
3. 6I-0260 M [3] BOLT (M8X1.25X25-MM)  
4. 6I-0291 M [1] NUT (M8X1.25-THD)  
5. 6I-1090 M [2] BOLT (M8X1.25X40-MM)  
6. 7M-7410 [1] PLUG-PIPE  
7. 9F-2247 [1] PLUG-PIPE  
8. 100-4830 M [1] BOLT (M10X1.5X20-MM)  
9. 114-4363 M [1] BOLT (M8X1.25X12-MM)  
10. 124-3815 M [1] BOLT (M8X1.25X16-MM)  
11. 145-8327 [1] SEAL-O-RING  
12. 149-2091 [1] SEAL-O-RING  
13. 155-0576 [8] MOUNT-ISOLATION  
14. 179-7071 [4] BOLT (M8X1.25X20-MM)  
15. 199-9252 [1] SEAL-O-RING  
16. 199-9267 [1] SEAL-O-RING  
17. 199-9751 [2] SEAL-O-RING  
18. 271-4055 [1] CONTROL GP-VOLTAGE (12-VOLT)(LOAD PROTECTION)  
19. 216-3436 [1] SENSOR GP-TEMPERATURE (ENGINE COOLANT)  
19A. 216-3436 [1] SENSOR GP-TEMPERATURE (AIR INLET)  
20. 216-3446 [1] SENSOR GP-SPEED (ENGINE TIMING)  
21. 216-3448 [1] SENSOR GP-PRESSURE (ENGINE OIL)  
22. 216-3450 [1] SENSOR GP-PRESSURE (BOOST)  
23. 217-0100 [4] SPACER (8.2X12.7X25.4-MM THK)  
24. 221-1018 [1] CONTROL GP-UNPROGRAMMED  
26. 232-2720 [1] TUBE AS (CYL NO. 1)(NO.1)  
27. 232-2721 [1] TUBE AS (CYL NO. 2)(NO.2)  
28. 232-2722 [1] TUBE AS (CYL NO. 3)(NO.3)  
29. 232-2723 [1] TUBE AS (CYL NO. 4)(NO.4)  
30. 232-2725 [2] CLIP  
31. 232-2726 [1] CLIP  
32. 232-3149 [3] WASHER (8.35X16.85X1.55-MM THK)  
33. 232-3156 [1] GEAR-FUEL PUMP (68-TEETH)  
34. 232-3157 [1] BRACKET  
35. 238-8671 [4] CLAMP-INJECTOR  
36. 232-3168 [1] BRACKET-SUPPORT  
37. 232-3274 M [4] BOLT (M8X1.25X48.1-MM)  
38. 234-2906 [1] INJECTOR AS-FUEL  
38A. 140-8718 [1] WASHER  
38B. 234-2900 [1] NOZZLE  
39. 225-5173 [1] PUMP GP-FUEL INJECTION  
40. 6I-0456 M [2] BOLT (M8X1.25X45-MM)  
41. 217-0099 [2] SPACER (8.2X25X2-MM THK)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP36450376
 

234-2919: PUMP GP-FUEL INJECTION

234-2919 PUMP GP-FUEL INJECTION
S/N 304340-UP
Type 2
ALSO AN ATTACHMENT
i02472053 SEBP3645
2342919 PUMP GP-FUEL INJECTION Parts scheme 2342919 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3054E INDUSTRIAL ENGINE:

Pos. Part No Qty Parts name Comments
1. 4B-4277 [4] WASHER (8.8X17.5X1.6-MM THK)  
2. 6I-0217 M [1] BOLT (M8X1.25X20-MM)  
3. 6I-0260 M [3] BOLT (M8X1.25X25-MM)  
4. 6I-0291 M [1] NUT (M8X1.25-THD)  
5. 6I-1090 M [2] BOLT (M8X1.25X40-MM)  
6. 7M-7410 [1] PLUG-PIPE  
7. 9F-2247 [1] PLUG-PIPE  
8. 100-4830 M [1] BOLT (M10X1.5X20-MM)  
9. 114-4363 M [1] BOLT (M8X1.25X12-MM)  
10. 124-3815 M [1] BOLT (M8X1.25X16-MM)  
11. 332-7549 [1] SEAL-O-RING  
12. 149-2091 [1] SEAL-O-RING  
13. 155-0576 [8] MOUNT-ISOLATION  
14. 179-7071 [4] BOLT (M8X1.25X20-MM)  
15. 199-9252 [1] SEAL-O-RING  
16. 199-9267 [1] SEAL-O-RING  
17. 199-9751 [2] SEAL-O-RING  
18. 396-6499 [1] CONTROL GP-VOLTAGE (12-VOLT)(LOAD PROTECTION)  
  1S-9593 [2] STRAP-CABLE  
  7T-0093 [4] PIN-CONNECTOR (12-GA TO 14-GA)  
  177-9653 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
19. 268-4360 [1] SENSOR GP-TEMPERATURE (ENGINE COOLANT)  
20. 216-3446 [1] SENSOR GP-SPEED (ENGINE TIMING)  
21. 274-6721 [1] SENSOR GP-PRESSURE (ENGINE OIL)  
22. 274-6720 [1] SENSOR GP-PRESSURE (BOOST)  
23. 217-0100 [4] SPACER (8.2X12.7X25.4-MM THK)  
24. 221-1018 [1] CONTROL GP-UNPROGRAMMED  
26. 232-2720 [1] TUBE AS (CYL NO. 1)(NO.1)  
27. 232-2721 [1] TUBE AS (CYL NO. 2)(NO.2)  
28. 232-2722 [1] TUBE AS (CYL NO. 3)(NO.3)  
29. 232-2723 [1] TUBE AS (CYL NO. 4)(NO.4)  
30. 232-2725 [2] CLIP  
31. 232-2726 [1] CLIP  
32. 232-3149 [3] WASHER (8.35X16.85X1.55-MM THK)  
33. 232-3156 [1] GEAR-FUEL PUMP (68-TEETH)  
34. 232-3157 [1] BRACKET  
35. 238-8671 [4] CLAMP-INJECTOR  
36. 232-3168 [1] BRACKET-SUPPORT  
37. 232-3274 M [4] BOLT (M8X1.25X48.1-MM)  
38. 234-2906 [4] INJECTOR AS-FUEL  
    (EACH INCLUDES)
38A. 140-8718 [1] WASHER  
38B. 234-2900 [1] NOZZLE  
38C. 275-1038 [1] SEAL-O-RING  
39. 225-5173 [1] PUMP GP-FUEL INJECTION  
40. 6I-0456 M [2] BOLT (M8X1.25X45-MM)  
41. 217-0099 [2] SPACER (8.2X25X2-MM THK)  
42. 268-4360 [1] SENSOR GP-TEMPERATURE (AIR INLET)  
   
  278-8678 F [1] KIT-SENSOR (LUBRICATION OIL PRESSURE)  
  278-8682 F [1] KIT-SENSOR (AIR PRESSURE)  
  F   NOT SHOWN
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP36450377
 

234-3027: PUMP GP-FUEL INJECTION

234-3027 PUMP GP-FUEL INJECTION
S/N 3041-339
ALSO AN ATTACHMENT
i01889669 SEBP3645
2343027 PUMP GP-FUEL INJECTION Parts scheme 2343027 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3054E INDUSTRIAL ENGINE:

Pos. Part No Qty Parts name Comments
1. 4B-4277 [4] WASHER (8.8X17.5X1.6-MM THK)  
2. 6I-0217 M [1] BOLT (M8X1.25X20-MM)  
3. 6I-0260 M [3] BOLT (M8X1.25X25-MM)  
4. 6I-0291 M [1] NUT (M8X1.25-THD)  
5. 6I-1090 M [2] BOLT (M8X1.25X40-MM)  
6. 7M-7410 [1] PLUG-PIPE  
7. 9F-2247 [1] PLUG-PIPE  
8. 100-4830 M [1] BOLT (M10X1.5X20-MM)  
9. 114-4363 M [1] BOLT (M8X1.25X12-MM)  
10. 124-3815 M [1] BOLT (M8X1.25X16-MM)  
11. 140-8714 [1] CLIP  
12. 145-8327 [1] SEAL-O-RING  
13. 149-2091 [1] SEAL-O-RING  
14. 155-0576 [8] MOUNT-ISOLATION  
15. 179-7071 [4] BOLT (M8X1.25X20-MM)  
16. 199-9252 [1] SEAL-O-RING  
17. 199-9267 [1] SEAL-O-RING  
18. 199-9751 [2] SEAL-O-RING  
19. 270-5322 [1] CONTROL GP-VOLTAGE (24-VOLT)(LOAD PROTECTION)  
  1S-9593 [2] STRAP-CABLE  
  7T-0093 [4] PIN-CONNECTOR (12-GA TO 14-GA)  
  177-9653 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
20. 268-4360 [1] SENSOR GP-TEMPERATURE (ENGINE COOLANT)  
20A. 268-4360 [1] SENSOR GP-TEMPERATURE (AIR INLET)  
21. 216-3446 [1] SENSOR GP-SPEED (ENGINE TIMING)  
22. 274-6721 [1] SENSOR GP-PRESSURE (ENGINE OIL)  
23. 274-6720 [1] SENSOR GP-PRESSURE (BOOST)  
24. 217-0100 [4] SPACER (8.2X12.7X25.4-MM THK)  
25. 221-1018 [1] CONTROL GP-UNPROGRAMMED  
26. 226-8776 [4] INJECTOR AS-FUEL  
    (EACH INCLUDES)
  232-2724 [1] NOZZLE  
26A. 140-8718 [1] WASHER  
28. 232-2720 [1] TUBE AS (CYL NO. 1)  
29. 232-2721 [1] TUBE AS (CYL NO. 2)  
30. 232-2722 [1] TUBE AS (CYL NO. 3)  
31. 232-2723 [1] TUBE AS (CYL NO. 4)  
32. 232-2725 [2] CLIP  
33. 232-2726 [1] CLIP  
34. 232-3149 [3] WASHER (8.35X16.85X1.55-MM THK)  
35. 232-3156 [1] GEAR-FUEL PUMP (68-TEETH)  
36. 232-3157 [1] BRACKET  
37. 238-8671 [4] CLAMP-INJECTOR  
38. 232-3168 [1] BRACKET-SUPPORT  
39. 6I-0456 M [2] BOLT (M8X1.25X45-MM)  
40. 232-3274 M [4] BOLT (M8X1.25X48.1-MM)  
41. 234-3454 [1] PUMP GP-FUEL INJECTION  
42. 217-0099 [2] SPACER (8.2X25X2-MM THK)  
   
  278-8678 F [1] KIT-SENSOR (LUBRICATION OIL PRESSURE)  
  278-8682 F [1] KIT-SENSOR (AIR PRESSURE)  
  F   NOT SHOWN
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP36450378
 

234-3027: PUMP GP-FUEL INJECTION

234-3027 PUMP GP-FUEL INJECTION
S/N 304340-UP
ALSO AN ATTACHMENT
i02067591 SEBP3645
2343027 PUMP GP-FUEL INJECTION Parts scheme 2343027 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3054E INDUSTRIAL ENGINE:

Pos. Part No Qty Parts name Comments
1. 4B-4277 [4] WASHER (8.8X17.5X1.6-MM THK)  
2. 6I-0217 M [1] BOLT (M8X1.25X20-MM)  
3. 6I-0260 M [3] BOLT (M8X1.25X25-MM)  
4. 6I-0291 M [1] NUT (M8X1.25-THD)  
5. 6I-1090 M [2] BOLT (M8X1.25X40-MM)  
6. 7M-7410 [1] PLUG-PIPE  
7. 9F-2247 [1] PLUG-PIPE  
8. 100-4830 M [1] BOLT (M10X1.5X20-MM)  
9. 114-4363 M [1] BOLT (M8X1.25X12-MM)  
10. 124-3815 M [1] BOLT (M8X1.25X16-MM)  
11. 140-8714 [1] CLIP  
12. 332-7549 [1] SEAL-O-RING  
13. 149-2091 [1] SEAL-O-RING  
14. 155-0576 [8] MOUNT-ISOLATION  
15. 179-7071 [4] BOLT (M8X1.25X20-MM)  
16. 199-9252 [1] SEAL-O-RING  
17. 199-9267 [1] SEAL-O-RING  
18. 199-9751 [2] SEAL-O-RING  
19. 396-6500 [1] CONTROL GP-ELECTRONIC (24-VOLT)(LOAD PROTECTION)  
  1S-9593 [2] STRAP-CABLE  
  7T-0093 [4] PIN-CONNECTOR (12-GA TO 14-GA)  
  177-9653 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
20. 268-4360 [1] SENSOR GP-TEMPERATURE (ENGINE COOLANT)  
20A. 268-4360 [1] SENSOR GP-TEMPERATURE (AIR INLET)  
21. 216-3446 [1] SENSOR GP-SPEED (ENGINE TIMING)  
22. 274-6721 [1] SENSOR GP-PRESSURE (ENGINE OIL)  
23. 274-6720 [1] SENSOR GP-PRESSURE (BOOST)  
24. 217-0100 [4] SPACER (8.2X12.7X25.4-MM THK)  
25. 221-1018 [1] CONTROL GP-UNPROGRAMMED  
26. 226-8776 [4] INJECTOR AS-FUEL  
    (EACH INCLUDES)
  232-2724 [1] NOZZLE  
26A. 140-8718 [1] WASHER  
28. 232-2720 [1] TUBE AS (CYL NO. 1)  
29. 232-2721 [1] TUBE AS (CYL NO. 2)  
30. 232-2722 [1] TUBE AS (CYL NO. 3)  
31. 232-2723 [1] TUBE AS (CYL NO. 4)  
32. 232-2725 [2] CLIP  
33. 232-2726 [1] CLIP  
34. 232-3149 [3] WASHER (8.35X16.85X1.55-MM THK)  
35. 232-3156 [1] GEAR-FUEL PUMP (68-TEETH)  
36. 232-3157 [1] BRACKET  
37. 238-8671 [4] CLAMP-INJECTOR  
38. 232-3168 [1] BRACKET-SUPPORT  
39. 6I-0456 M [2] BOLT (M8X1.25X45-MM)  
40. 232-3274 M [4] BOLT (M8X1.25X48.1-MM)  
41. 234-3454 [1] PUMP GP-FUEL INJECTION  
42. 217-0099 [2] SPACER (8.2X25X2-MM THK)  
   
  278-8678 F [1] KIT-SENSOR (LUBRICATION OIL PRESSURE)  
  278-8682 F [1] KIT-SENSOR (AIR PRESSURE)  
  F   NOT SHOWN
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP36450379
 

236-2551: PUMP GP-FUEL INJECTION

236-2551 PUMP GP-FUEL INJECTION
S/N 3041-339
ALSO AN ATTACHMENT
i01907403 SEBP3645
2362551 PUMP GP-FUEL INJECTION Parts scheme 2362551 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3054E INDUSTRIAL ENGINE:

Pos. Part No Qty Parts name Comments
1. 4B-4277 [4] WASHER (8.8X17.5X1.6-MM THK)  
2. 6I-0217 M [1] BOLT (M8X1.25X20-MM)  
3. 6I-0260 M [3] BOLT (M8X1.25X25-MM)  
4. 6I-0291 M [1] NUT (M8X1.25-THD)  
5. 6I-1090 M [2] BOLT (M8X1.25X40-MM)  
6. 7M-7410 [1] PLUG-PIPE  
7. 9F-2247 [1] PLUG-PIPE  
8. 100-4830 M [1] BOLT (M10X1.5X20-MM)  
9. 114-4363 M [1] BOLT (M8X1.25X12-MM)  
10. 124-3815 M [1] BOLT (M8X1.25X16-MM)  
11. 140-8714 [1] CLIP  
12. 145-8327 [1] SEAL-O-RING  
13. 149-2091 [1] SEAL-O-RING  
14. 155-0576 [8] MOUNT-ISOLATION  
15. 179-7071 [4] BOLT (M8X1.25X20-MM)  
16. 199-9252 [1] SEAL-O-RING  
17. 199-9267 [1] SEAL-O-RING  
18. 199-9751 [2] SEAL-O-RING  
19. 216-2621 [1] CONTROL GP-VOLTAGE (LOAD PROTECTION)  
  1S-9593 [2] STRAP-CABLE  
  7T-0093 [4] PIN-CONNECTOR (12-GA TO 14-GA)  
  177-9653 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
20. 216-3436 [1] SENSOR GP-TEMPERATURE (ENGINE COOLANT)  
20A. 216-3436 [1] SENSOR GP-TEMPERATURE (AIR INLET)  
21. 216-3446 [1] SENSOR GP-SPEED (ENGINE TIMING)  
22. 216-3448 [1] SENSOR GP-PRESSURE (ENGINE OIL)  
23. 216-3450 [1] SENSOR GP-PRESSURE (BOOST)  
24. 217-0100 [4] SPACER (8.2X12.7X25.4-MM THK)  
25. 221-1018 [1] CONTROL GP-UNPROGRAMMED  
26. 233-7972 [4] INJECTOR AS-FUEL  
    (EACH INCLUDES)
  234-0387 [1] NOZZLE  
26A. 140-8718 [1] WASHER  
27. 232-1117 [1] CLIP-PIPE  
28. 232-2720 [1] TUBE AS (CYL NO. 1)(NO.1)  
29. 232-2721 [1] TUBE AS (CYL NO. 2)(NO.2)  
30. 232-2722 [1] TUBE AS (CYL NO. 3)(NO.3)  
31. 232-2723 [1] TUBE AS (CYL NO. 4)(NO.4)  
32. 232-2725 [2] CLIP  
33. 232-2726 [1] CLIP  
34. 232-3149 [3] WASHER (8.35X16.85X1.55-MM THK)  
35. 232-3156 [1] GEAR-FUEL PUMP (68-TEETH)  
36. 232-3157 [1] BRACKET  
37. 232-3158 [4] CLAMP-INJECTOR  
38. 232-3168 [1] BRACKET-SUPPORT  
39. 6I-0456 M [2] BOLT (M8X1.25X45-MM)  
40. 232-3274 M [4] BOLT (M8X1.25X48.1-MM)  
41. 236-2542 [1] PUMP GP-FUEL INJECTION  
42. 217-0099 [2] SPACER (8.2X25X2-MM THK)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

Information:

Engine News
Improved Fuel Transfer Pump {1258, 1260}
2007/10/01
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1260}
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1260}
Operation and Maintenance Manual
Fuel System Secondary Filter - Replace
3054E and 3056E Industrial Engines
Fuel System Primary Filter/Water Separator - Drain
3054E and 3056E Industrial Engines
Tool Operating Manual
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Disassembly and Assembly
Fuel Priming Pump and Fuel Filter Base - Remove and Install
3054E Industrial Engine

Caterpillar Parts SIS Catalog 3054E :

FILTER GP-FUEL
441-5108 FILTER GP-FUEL
FILTER GP-FUEL
267-5621 FILTER GP-FUEL
FILTER AS-FUEL
386-0189 FILTER AS-FUEL
FILTER & LINES GP-FUEL
260-3128 FILTER & LINES GP-FUEL
FILTER & LINES GP-FUEL
260-3128 FILTER & LINES GP-FUEL
215-9515 CONNECTOR-HOSE
215-9513 CONNECTOR-HOSE
215-9512 CONNECTOR-HOSE
467-7011 KIT-FUEL PRIMING PUMP
PUMP GP-FUEL INJECTION
232-3267 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
232-3267 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
234-2919 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
234-2919 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
234-2919 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
234-3027 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
234-3027 PUMP GP-FUEL INJECTION

Truck sale: