225-6727 CYLINDER GP-BULLDOZER LIFT S/N RJS1-UP 120.65-MM (4.75-IN) BORE X 1570-MM (61.81-IN) STROKE PART OF 236-5216, 236-5217 CYLINDER & LINES GP-LIFT AN ATTACHMENT D9T



HYDRAULIC SYSTEM
CYLINDER GP

TRACK-TYPE TRACTOR D9T TRACK-TYPE TRACTOR RJS
 D9T Track-Type Tractor RJS00001-UP (MACHINE) POWERED BY C18 Engine SEBP3653 D9T RJS   (2001)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER AR-TILT
246-1026 CYLINDER AR-TILT
CYLINDER GP-BULLDOZER LIFT
165-8633 CYLINDER GP-BULLDOZER LIFT
CYLINDER GP-BULLDOZER LIFT
225-6727 CYLINDER GP-BULLDOZER LIFT
CYLINDER GP-BULLDOZER LIFT
380-5284 CYLINDER GP-BULLDOZER LIFT
CYLINDER GP-RIPPER
132-5123 CYLINDER GP-RIPPER
CYLINDER GP-RIPPER
132-5149 CYLINDER GP-RIPPER
 

#SEBP36530680
 

225-6727: CYLINDER GP-BULLDOZER LIFT

225-6727 CYLINDER GP-BULLDOZER LIFT
S/N RJS1-UP
120.65-MM (4.75-IN) BORE X 1570-MM (61.81-IN) STROKE
PART OF 236-5216, 236-5217 CYLINDER & LINES GP-LIFT
AN ATTACHMENT
i02214581 SEBP3653
2256727 CYLINDER GP-BULLDOZER LIFT Parts scheme
  For full view, you need register

Parts for your D9T TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 131-7184 [1] RING-WEAR  
2. 131-7823 [1] PISTON AS  
  4T-8588 [1] SEAL AS  
3. 164-6403 [1] HEAD  
4. 222-1395 [1] BOLT AS  
5. 312-4247 [1] SEAL-WIPER  
6. 225-6730 [1] CYLINDER AS  
6A. 262-4512 [1] TRUNNION AS  
6B. 5J-1192 [2] BUSHING  
7. 225-6733 Y [1] SENSOR & MOUNTING GP  
8. 225-6736 [1] ROD AS  
9. 095-9806 M [3] BOLT-SOCKET HEAD (M16X2X80-MM)  
10. 430-5984 [1] PLATE-BEARING  
11. 312-4248 [1] SEAL AS-BUFFER  
12. 175-7903 [1] SEAL-O-RING  
13. 2J-3961 [1] RING-BACKUP  
14. 160-6310 [1] CAP-BEARING  
15. 3G-0911 B [28] SHIM (0.8-MM THK)  
16. 3S-4489 [1] SEAL-O-RING  
17. 7X-0851 M [4] NUT (M24X3-THD)  
18. 8C-9161 [1] RING-WEAR  
19. 8T-0672 M [4] BOLT (M24X3X160-MM)  
20. 312-4245 [1] SEAL-U-CUP  
   
    AVAILABLE REPAIR KIT(S):
  416-2092 [1] KIT-HYD CYLINDER SEAL  
    (INCLUDES RINGS & SEALS)
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36530681
 

380-5284: CYLINDER GP-BULLDOZER LIFT

380-5284 CYLINDER GP-BULLDOZER LIFT
S/N RJS1-UP
121-MM (4.8-IN) BORE X 1570-MM (61.8-IN) STROKE
PART OF 236-5216, 236-5217 CYLINDER & LINES GP-LIFT
AN ATTACHMENT
i05482375 SEBP3653
3805284 CYLINDER GP-BULLDOZER LIFT Parts scheme
  For full view, you need register

Parts for your D9T TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 384-3330 [1] CYLINDER AS  
1A. 262-4512 [1] TRUNNION AS  
1B. 5J-1192 [2] BUSHING  
2. 385-1890 [1] PISTON AS  
  4T-8588 [1] SEAL AS  
3. 384-3332 [1] ROD AS  
4. 164-6403 [1] HEAD  
5. 387-1390 [1] WASHER-HARD (48X76X6-MM THK)  
6. 131-7184 [1] RING-WEAR  
7. 5J-7878 [1] NUT-SELF LOCKING (1-7/8-12-THD)  
8. 384-3328 Y [1] SENSOR GP-POSITION (BULLDOZER LIFT)  
9. 214-1639 [1] MAGNET  
10. 243-3177 [1] RETAINER  
11. 119-7843 [1] SEAL-O-RING  
12. 3G-0911 B [28] SHIM (0.8-MM THK)  
13. 160-6310 [1] CAP-BEARING  
14. 8T-0672 M [4] BOLT (M24X3X160-MM)  
15. 7X-0851 M [4] NUT (M24X3-THD)  
16. 095-9806 M [3] BOLT-SOCKET HEAD (M16X2X80-MM)  
17. 8C-9161 [1] RING-WEAR  
18. 312-4248 [1] SEAL AS-BUFFER  
19. 312-4245 [1] SEAL-U-CUP  
20. 312-4247 [1] SEAL-WIPER  
21. 2J-3961 [1] RING-BACKUP  
22. 175-7903 [1] SEAL-O-RING  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36530682
 

132-5123: CYLINDER GP-RIPPER

132-5123 CYLINDER GP-RIPPER
S/N CRM1-UP; MAM1-UP
184.15-MM (7.25-IN) BORE X 454-MM (17.9-IN) STROKE
PART OF 217-3562 RIPPER AR-MULTISHANK, 217-3563 RIPPER AR-SINGLE SHANK
AN ATTACHMENT
i01403970 SEBP3653
1325123 CYLINDER GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D9T TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 132-5121 [1] CYLINDER AS  
1A. 3G-5999 [1] BUSHING  
2. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
3. 5J-3488 [1] LOCKNUT (2-1/4-12-THD)  
4. 1J-2674 [1] RING-WEAR  
5. 8T-1790 [1] SEAL AS  
6. 9T-5809 [1] PISTON  
7. 119-8455 [2] WASHER (57.3X100X6.35-MM THK)  
8. 5P-7593 [1] SEAL-O-RING  
9. 1U-1738 [1] RING-BACKUP  
10. 132-5122 [1] HEAD  
11. 8T-3282 [8] WASHER-HARD (22X35X3.5-MM THK)  
12. 6V-9667 M [2] BOLT (M20X2.5X100-MM)  
13. 147-6116 [1] ROD AS  
13A. 3G-5999 [1] BUSHING  
14. 6V-5845 M [6] BOLT (M20X2.5X70-MM)  
15. 346-5199 [1] SEAL-WIPER  
16. 421-4026 [1] SEAL-U-CUP  
17. 167-2209 [1] SEAL AS-BUFFER  
18. 8T-6745 [1] RING-WEAR  
19. 1P-4576 [4] FLANGE-HALF  
20. 8T-4196 M [8] BOLT (M10X1.5X35-MM)  
21. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP36530683
 

132-5149: CYLINDER GP-RIPPER

132-5149 CYLINDER GP-RIPPER
S/N CRM1-UP; MAM1-UP
152.4-MM (6-IN) BORE X 456.8-MM (18-IN) STROKE
PART OF 217-3562 RIPPER AR-MULTISHANK, 217-3563 RIPPER AR-SINGLE SHANK
FIELD REPLACEMENT ORDER @@@@@521-8391@@@@@
AN ATTACHMENT
i01390990 SEBP3653
1325149 CYLINDER GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D9T TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 132-5146 [1] CYLINDER AS  
1A. 3G-5999 [1] BUSHING  
2. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
3. 2J-0564 [1] LOCKNUT (2-12-THD)  
4. 9J-5860 [1] RING-WEAR  
5. 4T-4144 [1] SEAL AS  
6. 9T-5805 [1] PISTON  
7. 6J-9747 [1] WASHER (53X105X12.7-MM THK)  
8. 6D-9157 [1] SEAL-O-RING  
9. 8J-1717 [1] RING-BACKUP  
10. 132-5147 [1] HEAD  
11. 9T-0098 [1] ROD AS  
11A. 3G-5999 [1] BUSHING  
12. 6V-5845 M [4] BOLT (M20X2.5X70-MM)  
13. 8T-3282 [4] WASHER-HARD (22X35X3.5-MM THK)  
14. 312-4247 [1] SEAL-WIPER  
15. 167-2319 [1] SEAL-U-CUP  
16. 312-4248 [1] SEAL AS-BUFFER  
17. 9T-0094 [1] RING-WEAR  
18. 1P-4576 [4] FLANGE-HALF  
19. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
20. 8T-4196 M [8] BOLT (M10X1.5X35-MM)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP36530684
 

4Z-6363: CYLINDER GP-RIPPER

4Z-6363 CYLINDER GP-RIPPER -COLD WEATHER
S/N RJS1-UP
184.15-MM (7.25-IN)BORE X 454-MM (17.9-IN)STROKE
PART OF 211-5059 CYLINDER & LINES GP-RIPPER
AN ATTACHMENT
i00580814 SEBP3653
4Z6363 CYLINDER GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D9T TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 132-5121 [1] CYLINDER AS  
1A. 3G-5999 [1] BUSHING  
2. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)(RIPPER CYLINDER)  
3. 5J-3488 [1] LOCKNUT (2-1/4-12-THD)  
4. 1J-2674 [1] RING-WEAR  
5. 8T-1790 [1] SEAL AS  
6. 9T-5809 [1] PISTON  
7. 119-8455 [2] WASHER (57.3X100X6.35-MM THK)  
8. 5P-7593 [1] SEAL-O-RING  
9. 1U-1738 [1] RING-BACKUP  
10. 132-5122 [1] HEAD  
11. 8T-3282 [8] WASHER-HARD (22X35X3.5-MM THK)  
12. 6V-9667 M [2] BOLT (M20X2.5X100-MM)  
13. 147-6116 [1] ROD AS  
13A. 3G-5999 [1] BUSHING  
14. 6V-5845 M [6] BOLT (M20X2.5X70-MM)  
15. 225-3285 [1] SEAL-WIPER  
16. 9X-7404 [1] SEAL-U-CUP  
17. 167-2209 [1] SEAL AS-BUFFER  
18. 8T-6745 [1] RING-WEAR  
19. 1P-4576 [4] FLANGE-HALF  
20. 8T-4196 M [8] BOLT (M10X1.5X35-MM)  
21. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP36530685
 

521-8391: CYLINDER GP-RIPPER

521-8391 CYLINDER GP-RIPPER
S/N CRM1-UP; MAM1-UP
152.4-MM (6-IN) BORE X 456.9-MM (18-IN) STROKE
FIELD REPLACEMENT FOR @@@@@132-5149@@@@@
i07053197 SEBP3653
5218391 CYLINDER GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D9T TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 8T-4196 M [8] BOLT (M10X1.5X35-MM)  
2. 1P-4576 [4] FLANGE-HALF  
3. 2J-0564 [1] LOCKNUT (2-12-THD)  
4. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
5. 4T-4144 [1] SEAL AS  
6. 6D-9157 [1] SEAL-O-RING  
7. 6J-9747 [1] WASHER (53X105X12.7-MM THK)  
8. 8J-1717 [1] RING-BACKUP  
9. 8T-3282 [4] WASHER-HARD (22X35X3.5-MM THK)  
10. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
11. 9J-5860 [1] RING-WEAR  
12. 9T-0094 [1] RING-WEAR  
13. 9T-0098 [1] ROD AS  
13A. 3G-5999 [1] BUSHING  
14. 9T-5805 [1] PISTON  
15. 132-5147 [1] HEAD  
16. 421-4025 [1] SEAL-U-CUP  
17. 312-4247 [1] SEAL-WIPER  
18. 312-4248 [1] SEAL AS-BUFFER  
19. 521-8402 [1] CYLINDER AS  
19A. 3G-5999 [1] BUSHING  
20. 6V-5845 M [4] BOLT (M20X2.5X70-MM)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP36530686
 

6E-3113: CYLINDER GP-RIPPER PIN PULLER

6E-3113 CYLINDER GP-RIPPER PIN PULLER
S/N GNM1-UP; SEM1-UP; RJS1-UP
101.6-MM (4-IN) BORE X 138.5-MM (5.5-IN) STROKE
PART OF 216-0124 PULLER AR-PIN, 166-1820, 4Z-9490 PULLER GP-PIN
AN ATTACHMENT
i00398832 SEBP3653
6E3113 CYLINDER GP-RIPPER PIN PULLER Parts scheme
  For full view, you need register

Parts for your D9T TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 173-9779 M [1] BOLT (M24X3X80-MM)  
2. 6J-2797 J [1] RING-WEAR  
3. 5J-5402 J [1] SEAL AS  
4. 9T-3493 [1] PISTON  
5. 6V-8237 [1] WASHER (26X44X4-MM THK)  
6. 4T-6907 J [1] RING-WEAR  
7. 6E-3980 [1] ROD AS  
8. 231-3539 [1] SEAL-WIPER  
9. 167-2300 J [1] SEAL-U-CUP  
10. 167-2190 J [1] SEAL AS-BUFFER  
11. 2K-6830 J [1] RING-BACKUP  
12. 175-7900 J [1] SEAL-O-RING  
13. 6E-4976 [1] HEAD  
14. 6E-3976 [1] CYLINDER AS  
   
    AVAILABLE REPAIR KIT(S):
  240-4819 J [1] KIT-SEAL (HYDRAULIC CYLINDER)  
    (INCLUDES RINGS & SEALS)
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP36530687
 

4Z-6364: CYLINDER GP-RIPPER TIP

4Z-6364 CYLINDER GP-RIPPER TIP -COLD WEATHER
S/N RJS1-UP
152.4-MM (6-IN)BORE X 456.8-MM (18-IN)STROKE
PART OF 211-5059 CYLINDER & LINES GP-RIPPER
AN ATTACHMENT
i01386022 SEBP3653
4Z6364 CYLINDER GP-RIPPER TIP Parts scheme
  For full view, you need register

Parts for your D9T TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 132-5146 [1] CYLINDER AS  
1A. 3G-5999 [1] BUSHING  
2. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)(CYLINDER-RIPPER TIP)  
3. 2J-0564 [1] LOCKNUT (2-12-THD)  
4. 9J-5860 [1] RING-WEAR  
5. 4T-4144 [1] SEAL AS  
6. 9T-5805 [1] PISTON  
7. 6J-9747 [1] WASHER (53X105X12.7-MM THK)  
8. 6D-9157 [1] SEAL-O-RING  
9. 8J-1717 [1] RING-BACKUP  
10. 132-5147 [1] HEAD  
11. 9T-0098 [1] ROD AS  
11A. 3G-5999 [1] BUSHING  
12. 6V-5845 M [4] BOLT (M20X2.5X70-MM)  
13. 8T-3282 [4] WASHER-HARD (22X35X3.5-MM THK)  
14. 312-4247 [1] SEAL-WIPER  
15. 312-4245 [1] SEAL-U-CUP  
16. 312-4248 [1] SEAL AS-BUFFER  
17. 9T-0094 [1] RING-WEAR  
18. 1P-4576 [4] FLANGE-HALF  
19. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
20. 8T-4196 M [8] BOLT (M10X1.5X35-MM)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP36530688
 

109-6778: CYLINDER GP-TILT

109-6778 CYLINDER GP-TILT -STABILIZER-BULLDOZER
S/N T9H1-UP; T9J1-UP; RJS1-UP
209.5-MM (8.25-IN) BORE X 188-MM (7.4-IN) STROKE
PART OF 246-1045 PUSH ARM GP-STABILIZER
FIELD REPLACEMENT ORDER @@@@@521-8442@@@@@
AN ATTACHMENT
i01395795 SEBP3653
1096778 CYLINDER GP-TILT Parts scheme
  For full view, you need register

Parts for your D9T TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 109-6783 [1] CYLINDER AS  
1A. 1U-2182 [2] BUSHING  
2. 8T-8382 [1] SEAL-HEAD  
3. 4J-6888 [1] LOCKNUT (2-3/4-12-THD)  
4. 109-6781 [1] PISTON  
5. 109-6779 [1] HEAD  
6. 8J-4386 [1] SEAL-O-RING  
7. 8T-0283 M [6] BOLT (M30X3.5X110-MM)  
8. 6E-4859 [1] ROD AS  
8A. 8T-9044 [1] RING-RETAINING  
8B. 7J-3297 [1] BEARING  
9. 3G-3747 [1] RING-BACKUP  
10. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
11. 311-9318 [1] SEAL-WIPER  
12. 439-2695 [1] SEAL-U-CUP  
13. 311-9316 [1] SEAL AS-BUFFER  
14. 8T-1793 [1] SEAL AS  
15. 4J-7376 [1] RING-WEAR  
16. 8T-3329 [1] RING-WEAR  
17. 9X-8399 [6] WASHER (33X56X6-MM THK)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP36530689
 

109-8832: CYLINDER GP-TILT

109-8832 CYLINDER GP-TILT -RH
S/N RJS1-UP
209.55-MM (8.25-IN) BORE X 188-MM (7.4-IN) STROKE
PART OF 246-1026 CYLINDER AR-TILT, 350-2595 INSTALLATION AR-BULLDOZER
AN ATTACHMENT
i01395755 SEBP3653
1098832 CYLINDER GP-TILT Parts scheme
  For full view, you need register

Parts for your D9T TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 109-8836 [1] CYLINDER AS (RH)  
1A. 1U-2182 [2] BUSHING  
1B. 109-6784 [3] LUG  
2. 4J-6888 [1] LOCKNUT (2-3/4-12-THD)  
3. 4J-7376 [1] RING-WEAR  
4. 8T-1793 [1] SEAL AS  
5. 122-9350 [1] PISTON AS  
5A. 1J-8569 [2] INSERT-PISTON  
5B. 2H-3932 [2] SEAL-O-RING  
5C. 109-4670 [2] INSERT  
5D. 122-9351 [2] PLUNGER  
5E. 3K-8692 [4] RING-BACKUP  
6. 9T-1878 [2] WASHER (70.5X120X4.76-MM THK)  
7. 8J-4386 [1] SEAL-O-RING  
8. 3G-3747 [1] RING-BACKUP  
9. 109-6779 [1] HEAD  
10. 6E-4859 [1] ROD AS  
10A. 7J-3297 [1] BEARING  
10B. 8T-9044 [1] RING-RETAINING  
11. 8T-0283 M [6] BOLT (M30X3.5X110-MM)  
12. 9X-8399 [6] WASHER (33X56X6-MM THK)  
13. 8T-8382 [1] SEAL-HEAD  
14. 311-9318 [1] SEAL-WIPER  
15. 311-9317 [1] SEAL-U-CUP  
16. 311-9316 [1] SEAL AS-BUFFER  
17. 8T-3329 [1] RING-WEAR  
18. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
   
    AVAILABLE REPAIR KIT(S):
  245-6835 [1] KIT-SEAL (HYDRAULIC CYLINDER)  
    (INCLUDES RINGS & SEALS)
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

Information:

Tool Operating Manual
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}

Caterpillar Parts SIS Catalog D9T :

CYLINDER GP-BULLDOZER LIFT
165-8633 CYLINDER GP-BULLDOZER LIFT
CYLINDER AR-TILT
246-1026 CYLINDER AR-TILT
211-5059 CYLINDER & LINES GP-RIPPER
CYLINDER & LINES GP-LIFT
236-5217 CYLINDER & LINES GP-LIFT
CYLINDER & LINES GP-LIFT
236-5217 CYLINDER & LINES GP-LIFT
CYLINDER & LINES GP-LIFT
236-5216 CYLINDER & LINES GP-LIFT
CYLINDER & LINES GP-LIFT
236-5216 CYLINDER & LINES GP-LIFT
CYLINDER & LINES GP-LIFT
236-5216 CYLINDER & LINES GP-LIFT
CYLINDER GP-BULLDOZER LIFT
380-5284 CYLINDER GP-BULLDOZER LIFT
CYLINDER GP-RIPPER
132-5123 CYLINDER GP-RIPPER
CYLINDER GP-RIPPER
132-5149 CYLINDER GP-RIPPER
CYLINDER GP-RIPPER
4Z-6363 CYLINDER GP-RIPPER
CYLINDER GP-RIPPER
521-8391 CYLINDER GP-RIPPER
CYLINDER GP-RIPPER PIN PULLER
6E-3113 CYLINDER GP-RIPPER PIN PULLER
CYLINDER GP-RIPPER TIP
4Z-6364 CYLINDER GP-RIPPER TIP
CYLINDER GP-TILT
109-6778 CYLINDER GP-TILT