OPERATOR STATION
CONTROL GPCONTROL GP-IMPLEMENT
CONTROL GP-BRAKE
CONTROL GP-STEERING
CAB GP
MONITOR GP
OPERATOR STATION
CONTROL GP
#SEBP36530890
327-3550: CONTROL GP-JOYSTICK
327-3550 CONTROL GP-JOYSTICK -BULLDOZER, IMPLEMENT
S/N RJS727-UP
PART OF 245-4623 GRADE CONTROL AR
FIELD REPLACEMENT FOR @@@@@319-1859@@@@@
AN ATTACHMENT
S/N RJS727-UP
PART OF 245-4623 GRADE CONTROL AR
FIELD REPLACEMENT FOR @@@@@319-1859@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your D9T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 319-1858 Y | [1] | CONTROL GP-HANDLE (BULLDOZER, IMPLEMENT) | |
| 2. | 327-3541 | [1] | SENSOR AS-POSITION (BULLDOZER CONTROL HANDLE) | |
| 2A. | 186-3735 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | |
| 2B. | 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3. | 285-0150 | [1] | BOOT | |
| 4. | 4B-9808 | [2] | SETSCREW (1/4-20X0.5-IN) | |
| 5. | 174-3091 | [1] | KIT-RECEPTACLE (12-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 6. | 186-3735 | [11] | PIN-CONNECTOR (16-GA TO 18-GA) | |
| 7. | 8T-8737 | [1] | PLUG-SEAL | |
| 8. | 144-0331 | [2] | CAP-PUSH BUTTON (YELLOW) | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP36530891
363-9922: CONTROL GP-JOYSTICK
363-9922 CONTROL GP-JOYSTICK -WINCH
S/N RJS1-UP
FIELD REPLACEMENT FOR @@@@@269-9388@@@@@
FIELD INSTALLATION
S/N RJS1-UP
FIELD REPLACEMENT FOR @@@@@269-9388@@@@@
FIELD INSTALLATION
For full view, you need register
Parts for your D9T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 189-2305 | [1] | DETENT GP-CONTROL (REEL IN, REEL OUT) | |
| 2. | 193-4476 M | [8] | SCREW-PAN HEAD (M4X0.7X35-MM) | |
| 3. | 219-7912 | [1] | HANDLE GP-MODULAR (WINCH) | |
| 4. | 351-6940 | [1] | SENSOR GP-POSITION (DRUM CLUTCH RELEASE) | |
| 5. | 351-6941 | [1] | SENSOR GP-POSITION (WINCH REEL IN, OUT) | |
| 6. | 269-9346 | [1] | DETENT GP-CONTROL (DRUM CLUTCH RELEASE) | |
| 8. | 150-1293 M | [2] | SCREW-BUTTON HEAD (M4X0.7X12-MM) | |
| 9. | 151-4977 | [12] | WASHER (4.445X9.525X1.092-MM THK) | |
| 10. | 175-3265 | [1] | SCREW (8-16X0.63-IN) | |
| 11. | 192-4658 M | [4] | SCREW-PAN HEAD (M4X0.7X20-MM) | |
| 12. | 2K-4898 | [1] | CLAMP-TUBE | |
| 13. | 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 14. | 8T-8737 | [1] | PLUG-SEAL | |
| 15. | 186-3735 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | |
| M | METRIC PART | |||
#SEBP36530892
457-4642: CONTROL GP-JOYSTICK
457-4642 CONTROL GP-JOYSTICK -BULLDOZER
S/N RJS1240-UP
PART OF 205-8602 HYDRAULIC AR
FIELD REPLACEMENT FOR @@@@@327-3542@@@@@
S/N RJS1240-UP
PART OF 205-8602 HYDRAULIC AR
FIELD REPLACEMENT FOR @@@@@327-3542@@@@@
For full view, you need register
Parts for your D9T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 259-5750 | [1] | HANDGRIP AS | |
| 175-4165 | [2] | SCREW-PAN HEAD (4-20X0.5-IN) | ||
| 2. | 455-1129 | [1] | BASE AS-JOYSTICK | |
| 2A. | 8T-8729 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | |
| 2B. | 151-9275 | [1] | KIT-RECEPTACLE (6-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3. | 285-0150 | [1] | BOOT | |
| 4. | 4B-9808 | [2] | SETSCREW (1/4-20X0.5-IN) | |
#SEBP36530893
457-4645: CONTROL GP-JOYSTICK
457-4645 CONTROL GP-JOYSTICK -BULLDOZER, IMPLEMENT
S/N RJS1-UP
PART OF 245-4623 GRADE CONTROL AR, 388-2549, 388-2552 KIT-RETROFIT
AN ATTACHMENT
S/N RJS1-UP
PART OF 245-4623 GRADE CONTROL AR, 388-2549, 388-2552 KIT-RETROFIT
AN ATTACHMENT
For full view, you need register
Parts for your D9T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 319-1858 Y | [1] | CONTROL GP-HANDLE (BULLDOZER, IMPLEMENT) | |
| 2. | 455-1129 | [1] | BASE AS-JOYSTICK (BULLDOZER CONTROL HANDLE) | |
| 2A. | 8T-8729 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | |
| 2B. | 151-9275 | [1] | KIT-RECEPTACLE (6-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3. | 285-0150 | [1] | BOOT | |
| 4. | 4B-9808 | [2] | SETSCREW (1/4-20X0.5-IN) | |
| 5. | 174-3091 | [1] | KIT-RECEPTACLE (12-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 6. | 8T-8729 | [17] | PIN-CONNECTOR (16-GA TO 18-GA) | |
| 7. | 8T-8737 | [11] | PLUG-SEAL | |
| 8. | 144-0331 | [2] | CAP-PUSH BUTTON (YELLOW) | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP36530894
226-7420: CONTROL GP-RIPPER
226-7420 CONTROL GP-RIPPER
S/N RJS1-UP
PART OF 196-9987 CONTROL & MTG GP-JOYSTICK
AN ATTACHMENT
S/N RJS1-UP
PART OF 196-9987 CONTROL & MTG GP-JOYSTICK
AN ATTACHMENT
For full view, you need register
Parts for your D9T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4B-1270 | [2] | SCREW-MACHINE (8-32X0.75-IN) | |
| 2. | 8T-5410 | [2] | SEAL-LIP TYPE | |
| 3. | 295-4155 M | [4] | BOLT-SOCKET HEAD (M5X0.8X35-MM) | |
| 4. | 112-0858 | [4] | BEARING | |
| 5. | 137-5817 | [1] | KNOB AS (RIPPER CONTROL) | |
| 9. | 132-7450 | [1] | SWITCH AS-PUSH BUTTON (RIPPER AUTOMATIC STOW) | |
| 144-0331 | [1] | CAP-PUSH BUTTON (YELLOW) | ||
| 10. | 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | |
| (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 11. | 195-7869 B | [1] | SHIM (0.15-MM THK) | |
| 12. | 195-7870 B | [1] | SHIM (0.51-MM THK) | |
| 13. | 195-7871 B | [1] | SHIM (0.25-MM THK) | |
| 14. | 195-7872 B | [1] | SHIM (0.41-MM THK) | |
| 15. | 266-1474 | [1] | SENSOR GP-POSITION (RIPPER SHANK IN, OUT) | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9X-1813 E | SLEEVE (13-CM) | |||
| 9X-3401 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 16. | 266-1475 | [1] | SENSOR GP-POSITION (RIPPER RAISE, LOWER) | |
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9G-3695 | [1] | PLUG-SEAL | ||
| 9X-3401 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 17. | 223-4461 | [1] | BASE AS | |
| 18. | 226-2751 | [1] | LEVER (RIPPER SHANK IN, OUT) | |
| 20. | 226-7480 | [1] | SHAFT | |
| 22. | 245-3856 | [2] | SPRING | |
| 24. | 2L-5894 | [4] | PIN-SPRING | |
| 25. | 3K-4897 | [2] | PIN-SPRING | |
| 27. | 8T-5677 D | SLEEVE (0.5-M) | ||
| 28. | 8T-0328 | [4] | WASHER-HARD (5.5X10X1-MM THK) | |
| 29. | 186-3736 | [3] | SOCKET-CONNECTOR (16-GA TO 18-GA) | |
| 30. | 7X-3159 E | TUBE-HEAT SHRINK (2.5-CM EACH) | ||
| 31. | 347-4191 | [2] | GASKET | |
| 32. | 228-4673 | PLUG | ||
| PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY | ||||
| B | USE AS REQUIRED | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP36530895
237-0160: CONTROL GP-STEER CLUTCH & BRK
237-0160 CONTROL GP-STEER CLUTCH & BRK
S/N RJS1-UP
PART OF 242-5198 CONTROL GP-STEERING
Type 1
S/N RJS1-UP
PART OF 242-5198 CONTROL GP-STEERING
Type 1
For full view, you need register
Parts for your D9T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 237-0149 | [1] | COVER | |
| 2. | 237-0152 | [1] | PLATE AS | |
| 3. | 237-0154 | [1] | PLATE | |
| 4. | 237-0155 | [1] | COVER | |
| 5. | 237-0156 | [1] | COVER | |
| 6. | 237-0158 Y | [1] | CONTROL GP-STEERING & XMSN | |
| 7. | 3E-8020 M | [1] | SCREW-TRUSS HEAD (M6X1X25-MM) | |
| 8. | 5C-2890 M | [1] | NUT (M6X1-THD) | |
| 9. | 8T-4138 M | [3] | BOLT (M6X1X20-MM) | |
| 10. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 11. | 8T-4908 M | [4] | BOLT (M8X1.25X25-MM) | |
| 12. | 9X-2043 M | [4] | SCREW-TRUSS HEAD (M6X1X14-MM) | |
| 13. | 9X-2045 M | [5] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 14. | 9X-8256 | [4] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP36530896
237-0160: CONTROL GP-STEER CLUTCH & BRK
237-0160 CONTROL GP-STEER CLUTCH & BRK
S/N RJS1-UP
PART OF 242-5198 CONTROL GP-STEERING
Type 2
S/N RJS1-UP
PART OF 242-5198 CONTROL GP-STEERING
Type 2
For full view, you need register
Parts for your D9T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9X-6772 C | [5] | STRAP-CABLE | |
| 2. | 112-0858 C | [2] | BEARING | |
| 3. | 159-7351 C | [2] | CLIP | |
| 4. | 215-7446 C | [1] | CUSHION AS | |
| 5. | 220-3990 C | [1] | PLATE | |
| 6. | 221-9409 C | [2] | KNOB (ARMREST ADJUSTMENT) | |
| 7. | 224-4973 C | [1] | CUSHION AS | |
| 8. | 237-0149 | [1] | COVER | |
| 9. | 237-0152 | [1] | PLATE AS | |
| 10. | 237-0153 C | [1] | PLATE AS | |
| 11. | 237-0154 | [1] | PLATE | |
| 12. | 237-0155 | [1] | COVER | |
| 13. | 237-0156 | [1] | COVER | |
| 14. | 268-4737 C | [1] | COVER AS | |
| 15. | 336-3867 C | [1] | HARNESS AS-CONSOLE (RH, JOYSTICK) | |
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8737 | [10] | PLUG-SEAL | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(15-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM) | |||
| 9X-3402 | [41] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 144-1636 | [13] | PIN-CONNECTOR (14-GA TO 18-GA) | ||
| 155-2255 | [2] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| 155-2274 | [2] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 16. | 337-6853 CY | [1] | CONTROL GP-HANDLE (BRAKE, STEERING, TRANSMISSION) | |
| 17. | 338-2845 C | [1] | GROMMET | |
| 18. | 1B-8706 C | [1] | KEY-WOODRUFF | |
| 19. | 276-5312 CY | [1] | SENSOR GP-POSITION (STEERING, XMSN CONTROL HANDLE) | |
| 20. | 3E-8020 M | [1] | SCREW-TRUSS HEAD (M6X1X25-MM) | |
| 21. | 5C-2890 M | [1] | NUT (M6X1-THD) | |
| 22. | 7X-0578 C | [2] | WASHER-HARD (10.2X32X2.5-MM THK) | |
| 23. | 8T-4121 C | [6] | WASHER-HARD (11X21X2.5-MM THK) | |
| 24. | 8T-4137 CM | [5] | BOLT (M10X1.5X20-MM) | |
| 25. | 8T-4138 M | [3] | BOLT (M6X1X20-MM) | |
| 26. | 8T-4186 CM | [1] | BOLT (M10X1.5X40-MM) | |
| 27. | 8T-4189 CM | [3] | BOLT (M8X1.25X20-MM) | |
| 28. | 8T-4191 CM | [2] | BOLT (M10X1.5X16-MM) | |
| 29. | 8T-4195 CM | [2] | BOLT (M10X1.5X30-MM) | |
| 30. | 8T-4224 C | [7] | WASHER-HARD (8.8X16X2-MM THK) | |
| 31. | 8T-4908 M | [4] | BOLT (M8X1.25X25-MM) | |
| 32. | 8T-5410 C | [2] | SEAL-LIP TYPE | |
| 33. | 9X-2043 M | [4] | SCREW-TRUSS HEAD (M6X1X14-MM) | |
| 34. | 9X-2045 M | [5] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 35. | 9X-8256 | [4] | WASHER (6.6X12X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP36530897
242-5198: CONTROL GP-STEERING
For full view, you need register
Parts for your D9T TRACK-TYPE TRACTOR:
CATERPILLAR SIS#SEBP36530898
209-5192: COVER GP-CAB
For full view, you need register
Parts for your D9T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6Y-0206 | [2] | RETAINER | |
| 2. | 7G-4824 | [1] | STRAP | |
| 3. | 8E-7791 | [1] | STRAP (MALE END) | |
| 5. | 209-5163 | [1] | FLOOR MAT-LOWER (CAB) | |
| 6. | 209-5164 | [1] | FLOOR MAT-UPPER (CAB) | |
| 7. | 209-5196 | [1] | PANEL-ACOUSTICAL | |
| 8. | 341-6812 | [1] | PANEL-ACOUSTICAL (REAR) | |
| 9. | 237-0190 | [1] | GASKET | |
| 10. | 7X-7729 | [1] | WASHER (11X25X3-MM THK) | |
| 11. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 12. | 9X-2038 | [3] | WASHER (7X19X2-MM THK) | |
| 13. | 9X-2043 M | [2] | SCREW-TRUSS HEAD (M6X1X14-MM) | |
| 14. | 9X-2045 M | [5] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 15. | 7Y-2292 | [2] | WASHER (13X50X2-MM THK) | |
| 16. | 132-4842 M | [2] | SCREW-WING (M10X1.5X64-MM) | |
| M | METRIC PART | |||
#SEBP36530899
286-0134: DISPLAY GP-MONITOR
286-0134 DISPLAY GP-MONITOR -CD700C
S/N RJS1-UP
PART OF 317-6527, 332-3577 GRADE CONTROL AR, 290-5570, 290-5571, 292-0279, 292-0280 GRADE CONTROL AR-SATELLITE
AN ATTACHMENT
S/N RJS1-UP
PART OF 317-6527, 332-3577 GRADE CONTROL AR, 290-5570, 290-5571, 292-0279, 292-0280 GRADE CONTROL AR-SATELLITE
AN ATTACHMENT
For full view, you need register
Parts for your D9T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 244-1716 | [1] | DISPLAY GP-MONITOR (CD700C) | ||
| 283-4426 | [1] | CARD AS-MEMORY (FLASH) | ||
| 194-8031 | [1] | ADAPTER (COMPACT) | ||
| 8T-4171 M | [6] | BOLT (M6X1X12-MM) | ||
| 292-0311 | [1] | CASE-CARRYING | ||
| 8T-0285 M | [6] | SCREW-MACHINE (M4X0.7X12-MM) | ||
| 9X-8256 | [6] | WASHER (6.6X12X2-MM THK) | ||
| 096-6166 | [6] | WASHER-HARD (4.5X9X1-MM THK) | ||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
