POWER TRAIN
VALVE GP-RELIEFVALVE GP-SOLENOID
FRAME AND BODY
GUARD GPBAR GP-STRIKER
POWER TRAIN
VALVE GP-RELIEF
#SEBP36540550
208-3019: VALVE GP-RELIEF
208-3019 VALVE GP-RELIEF -TORQUE CONVERTER OUTLET
S/N KPZ1-UP
PART OF 208-9521 LINES GP-POWER TRAIN OIL
ALSO AN ATTACHMENT
S/N KPZ1-UP
PART OF 208-9521 LINES GP-POWER TRAIN OIL
ALSO AN ATTACHMENT
For full view, you need register
Parts for your D8T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1W-9860 | [1] | SPRING | |
| 2. | 8T-4178 M | [3] | BOLT (M10X1.5X90-MM) | |
| 3. | 9S-4191 | [1] | PLUG (9/16-18-THD) | |
| 4. | [1] | BODY-VALVE (RELIEF VALVE) | ||
| 5. | 115-0482 | [1] | SPOOL | |
| 6. | 115-3514 | [1] | SPRING | |
| 7. | 3J-1907 | [1] | SEAL-O-RING | |
| 8. | 4M-8239 | [2] | COVER | |
| 9. | 6V-5839 | [3] | WASHER (11X21X2.5-MM THK) | |
| 10. | 8J-6709 B | [2] | SHIM (0.25-MM THK) | |
| 11. | 8M-4986 | [1] | SEAL-O-RING | |
| 12. | 8M-4992 | [1] | SEAL-O-RING | |
| 13. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 14. | 8T-4136 M | [4] | BOLT (M10X1.5X25-MM) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#SEBP36540551
213-4540: VALVE GP-RELIEF
213-4540 VALVE GP-RELIEF -TRANSMISSION OIL PRESSURE
S/N DZH1-UP
PART OF 213-4539, 265-5278 CONTROL GP-TRANSMISSION HYD
ALSO AN ATTACHMENT
S/N DZH1-UP
PART OF 213-4539, 265-5278 CONTROL GP-TRANSMISSION HYD
ALSO AN ATTACHMENT
For full view, you need register
Parts for your D8T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2M-7041 | [1] | SLUG | |
| 2. | 4M-5905 | [1] | SCREW-ADJUSTMENT (5/16-18X1-IN) | |
| 3. | 5B-3180 | [1] | NUT (5/16-18-THD) | |
| 4. | 307-2670 | [1] | PLUG AS | |
| 9S-4185 | [1] | PLUG (3/4-16-THD) | ||
| 238-5080 | [1] | SEAL-O-RING | ||
| 5. | 244-3712 | [1] | PLUG AS | |
| 9S-4191 | [1] | PLUG (9/16-18-THD) | ||
| 214-7568 | [1] | SEAL-O-RING | ||
| 6. | 106-9212 | [1] | SPRING | |
| 7. | 106-9214 | [1] | PLATE | |
| 8. | 109-3968 | [1] | SPOOL AS-RELIEF | |
| 9. | 153-4247 | [1] | STOP | |
| 10. | 204-6502 | [1] | MANIFOLD | |
| 11. | 9M-1974 | [7] | WASHER-HARD (8.8X16X2-MM THK) | |
| 12. | 0S-1617 | [6] | BOLT (5/16-18X0.75-IN) | |
| 13. | 309-2996 | [1] | PLUG AS | |
| 6Y-4638 | [1] | PLUG-HEX SOCKET (1-5/16-12-THD) | ||
| 7M-8485 | [1] | SEAL-O-RING |
#SEBP36540552
198-4607: VALVE GP-SOLENOID
198-4607 VALVE GP-SOLENOID
S/N KPZ1-2453
24-VOLT
PART OF 208-3015 VALVE GP-PRIORITY
S/N KPZ1-2453
24-VOLT
PART OF 208-3015 VALVE GP-PRIORITY
For full view, you need register
Parts for your D8T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | [1] | WASHER (13.59X23.88X1.02-MM THK) | ||
| 2. | 156-5970 | [1] | NUT (1/2-20-THD) | |
| 3. | 301-3118 | [1] | COIL AS | |
| 4. | 198-4605 J | [1] | SPOOL AS | |
| [1] | WASHER (13.59X23.88X1.02-MM THK) | |||
| 156-5970 | [1] | NUT (1/2-20-THD) | ||
| AVAILABLE REPAIR KIT(S): | ||||
| 7T-4515 J | [1] | KIT-SEAL (SOLENOID VALVE) | ||
| (INCLUDES 3 SEALS) | ||||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
#SEBP36540553
269-5771: VALVE GP-SOLENOID
269-5771 VALVE GP-SOLENOID
S/N KPZ2454-UP
PART OF 317-3741, 334-0571 VALVE GP-PRIORITY
ALSO AN ATTACHMENT
S/N KPZ2454-UP
PART OF 317-3741, 334-0571 VALVE GP-PRIORITY
ALSO AN ATTACHMENT
For full view, you need register
Parts for your D8T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 301-3118 | [1] | COIL AS | |
| 1S-9593 | [2] | STRAP-CABLE | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 2. | 269-5772 J | [1] | SPOOL AS | |
| 2A. | 156-5970 | [1] | NUT (1/2-20-THD) | |
| 2B. | [1] | WASHER (13.59X23.88X1.02-MM THK) | ||
| AVAILABLE REPAIR KIT(S): | ||||
| 7T-4515 J | [1] | KIT-SEAL | ||
| (INCLUDES SEALS) | ||||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
#SEBP36540554
102-6331: ACTUATOR GP-POWER
102-6331 ACTUATOR GP-POWER
S/N KPZ1-UP
PART OF 209-5103 GUARD AR-BOTTOM
AN ATTACHMENT
S/N KPZ1-UP
PART OF 209-5103 GUARD AR-BOTTOM
AN ATTACHMENT
For full view, you need register
Parts for your D8T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 114-3929 | [1] | KIT-SEAL (POWER ACTUATOR) | |
| (INCLUDES COVER TUBE SEAL, GASKET, MOTOR SEAL, O-RING & LIP SEAL) | ||||
| 2. | 114-9981 | [1] | KIT-GEAR (POWER ACTUATOR) | |
| (INCLUDES INTERMEDIATE GEAR & WASHERS) | ||||
| 3. | 114-9990 | [1] | KIT-CLUTCH (POWER ACTUATOR) | |
| (INCLUDES CLUTCH, WASHERS & KEY) | ||||
| 4. | 187-1295 | [1] | KIT-COVER (POWER ACTUATOR) | |
| (INCLUDES COVER-TUBE & HOLDER-TUBE COVER) | ||||
| 5. | 115-0001 | [1] | MOTOR | |
| PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY | ||||
#SEBP36540555
209-5100: BAR AR-STRIKER
209-5100 BAR AR-STRIKER -REAR ONLY
S/N KPZ1-UP
FOR USE WITH @@@@@209-3862@@@@@, @@@@@238-1177@@@@@, GUARD GP-FUEL TANK
CANNOT BE USED WITH @@@@@217-3650@@@@@, @@@@@253-8988@@@@@, WINCH, RIPPER OR DRAWBAR
AN ATTACHMENT
S/N KPZ1-UP
FOR USE WITH @@@@@209-3862@@@@@, @@@@@238-1177@@@@@, GUARD GP-FUEL TANK
CANNOT BE USED WITH @@@@@217-3650@@@@@, @@@@@253-8988@@@@@, WINCH, RIPPER OR DRAWBAR
AN ATTACHMENT
For full view, you need register
Parts for your D8T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1H-4106 | [1] | PIN AS-DRAWBAR | |
| 2. | 7G-6623 | [1] | HITCH | |
| 3. | 8E-9289 | [1] | LATCH | |
| 4. | 238-6900 Y | [1] | BAR GP-STRIKER | |
| 5. | 3K-2889 | [1] | LOCKNUT (5/8-11-THD) | |
| 6. | 7X-0349 | [1] | BOLT (5/8-11X3-IN) | |
| 7. | 7X-2580 M | [14] | BOLT (M30X3.5X90-MM) | |
| 8. | 7X-2585 M | [6] | BOLT (M30X3.5X160-MM) | |
| 9. | 9X-8258 | [20] | WASHER (33X56X6-MM THK) | |
| 10. | 155-0755 E | SEAL (50-CM EACH) | ||
| 11. | 149-5933 E | SEAL (66-CM) | ||
| 11A. | 149-5933 E | SEAL (123-CM) | ||
| 11B. | 149-5933 E | SEAL (14-CM EACH) | ||
| 11C. | 149-5933 E | SEAL (32-CM EACH) | ||
| 12. | 238-9166 E | SEAL (130-CM) | ||
| 12A. | 238-9166 E | SEAL (14-CM EACH) | ||
| 13. | 245-9829 | [12] | PLUG | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP36540556
241-3811: BAR AR-STRIKER
241-3811 BAR AR-STRIKER -WASTE HANDLING
S/N KPZ1-UP
660-MM (26-IN) MAXIMUM TRACK WIDTH
AN ATTACHMENT
S/N KPZ1-UP
660-MM (26-IN) MAXIMUM TRACK WIDTH
AN ATTACHMENT
For full view, you need register
Parts for your D8T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 129-0997 | [1] | PLATE AS | |
| 2. | 129-1000 | [1] | PLATE AS | |
| 3. | 241-3812 | [1] | PLATE AS (RH) | |
| 4. | 241-3814 | [1] | PLATE AS (LH) | |
| 5. | 241-3816 | [1] | PLATE AS (RH) | |
| 6. | 241-3821 | [1] | PLATE AS (LH) | |
| 7. | 7X-0402 | [24] | BOLT (1-8X2-IN) | |
| 8. | 7X-0406 | [12] | BOLT (1-8X3-IN) | |
| 9. | 8T-5361 | [36] | WASHER-HARD (28X49X5-MM THK) |
#SEBP36540557
265-6970: BAR AR-STRIKER
265-6970 BAR AR-STRIKER -NON-SUSPENDED UNDERCARRIAGE
S/N KPZ1-UP
660-MM (26-IN) MAX TRACK WIDTH
FOR USE WITH @@@@@209-3418@@@@@, @@@@@243-5300@@@@@
AN ATTACHMENT
S/N KPZ1-UP
660-MM (26-IN) MAX TRACK WIDTH
FOR USE WITH @@@@@209-3418@@@@@, @@@@@243-5300@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your D8T TRACK-TYPE TRACTOR:
CATERPILLAR SIS#SEBP36540558
4Z-0568: BAR AS-STRIKER
4Z-0568 BAR AS-STRIKER
S/N KPZ1-UP
FOR USE WITH SINGLE OR MULTI SHANK RIPPER
FIELD INSTALLATION
S/N KPZ1-UP
FOR USE WITH SINGLE OR MULTI SHANK RIPPER
FIELD INSTALLATION
For full view, you need register
Parts for your D8T TRACK-TYPE TRACTOR:
CATERPILLAR SIS#SEBP36540559
238-6900: BAR GP-STRIKER
238-6900 BAR GP-STRIKER -REAR ONLY
S/N KPZ1-UP
660-MM (26-IN) MAXIMUM TRACK WIDTH
PART OF 209-5100 BAR AR-STRIKER
AN ATTACHMENT
S/N KPZ1-UP
660-MM (26-IN) MAXIMUM TRACK WIDTH
PART OF 209-5100 BAR AR-STRIKER
AN ATTACHMENT
For full view, you need register
Parts for your D8T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1L-4418 | [2] | SPRING-SHUTOFF | |
| 2. | 1P-2841 | [2] | SPACER (0.531X1X0.69-IN THK) | |
| 3. | 3B-4617 | [2] | PIN-COTTER | |
| 4. | 8T-1579 | [1] | PLATE | |
| 5. | 8T-9496 | [2] | LOCKNUT (9/16-18-THD) | |
| 6. | 8Y-6400 Y | [1] | LATCH GP (T-BAR, COMPARTMENT) | |
| 7. | 9Z-9214 | [2] | ROD AS | |
| (EACH INCLUDES) | ||||
| 1Z-9787 | [1] | BOSS | ||
| 8. | 126-7535 | [2] | HINGE AS (DOOR, RH) | |
| 9. | 126-7536 | [2] | HINGE AS (DOOR, LH) | |
| 10. | 200-7136 | [1] | COVER | |
| 11. | 216-9978 | [1] | BAR AS | |
| 12. | 216-9981 | [1] | DOOR AS-ACCESS (RH) | |
| 13. | 216-9982 | [1] | DOOR AS-ACCESS (LH) | |
| 14. | 239-0718 | [1] | BAR | |
| 15. | 2K-4973 | [2] | LOCKNUT (3/8-16-THD) | |
| 16. | 2K-8467 | [2] | PIN-SPRING | |
| 17. | 5P-1076 | [4] | WASHER-HARD (13.5X30X4-MM THK) | |
| 18. | 5S-7382 | [2] | BOLT (3/8-16X1.375-IN) | |
| 19. | 6V-7687 M | [10] | LOCKNUT (M12X1.75-THD) | |
| 20. | 7X-2549 M | [2] | BOLT (M12X1.75X100-MM) | |
| 21. | 8T-4136 M | [1] | BOLT (M10X1.5X25-MM) | |
| 22. | 8T-4184 M | [8] | BOLT (M12X1.75X45-MM) | |
| 23. | 8T-4222 | [1] | WASHER-PLATED (11X32X2.5-MM THK) | |
| 24. | 8T-4223 | [10] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 25. | 8T-4896 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
