209-3431 CONTROL AR-HYDRAULIC -BULLDOZER, WINCH S/N KPZ1-UP AN ATTACHMENT D8T TRACK-TYPE TRACTOR

Part No	Qty	Parts name
209-2608 Y	[1]	CONTROL GP-HANDLE (WINCH)
208-9529 Y	[1]	LINES GP-WINCH
215-6822 Y	[1]	VALVE GP-BANK 3 (BULLDOZER, WINCH)
		-OR-
336-5732 Y	[1]	VALVE GP-BANK 3 (BULLDOZER, WINCH)

222-7888	[1]	SWITCH AS-ROCKER (24-VOLT)(WINCH ON, OFF)

235-7152	[1]	FILM-INSTRUCTION (WINCH)
		(NEXT TO CONTROL DEVICE ON RH CONSOLE)
246-4311	[1]	GUARD (SWITCH)
Y		SEPARATE ILLUSTRATION

#SEBP36540871

209-5102: CONTROL AR-HYDRAULIC

CONTROL AR-HYDRAULIC

209-5102 CONTROL AR-HYDRAULIC -DUAL TILT BULLDOZER
S/N KPZ1-UP
AN ATTACHMENT

i06507490 SEBP3654

For full view, you need register

Parts for your D8T TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
208-6072 Y	[1]	CONTROL GP-JOYSTICK (BULLDOZER, DUAL TILT)
		S/N KPZ1-1140
242-6208 Y	[1]	CONTROL GP-JOYSTICK (BULLDOZER)(DUAL TILT)
		S/N KPZ1141-2579
314-7612 Y	[1]	CONTROL GP-JOYSTICK (BULLDOZER)(DUAL TILT)
		S/N KPZ2580-3169
327-3548 Y	[1]	CONTROL GP-JOYSTICK (BULLDOZER)
		-OR-
457-4643 Y	[1]	CONTROL GP-JOYSTICK (BULLDOZER)(BULLDOZER)
229-2013 Y	[1]	GUARD GP-RADIATOR
		S/N KPZ1-3169
211-9513 Y	[1]	LINES GP-TILT CYLINDER
217-4326 Y	[1]	VALVE GP-CONTROL (DUAL TILT)

8T-4137 M	[3]	BOLT (M10X1.5X20-MM)
338-3552	[1]	COVER-CYLINDER
233-7894	[1]	FILM-IDENTIFICATION (DUAL TILT)
		S/N KPZ1-2579
		(ON UPPER RH CONSOLE)
318-9690	[1]	FILM-INSTRUCTION (BULLDOZER TILT)
		S/N KPZ2580-UP
		(ON UPPER RH CONSOLE)
234-3404	[1]	FILM-IDENTIFICATION (AUTOMATIC BLADE)
		S/N KPZ1-2579
		(ON LOWER RH CONSOLE)
312-3420	[1]	FILM-INSTRUCTION (BULLDOZER CONTROL, AUTO)
		S/N KPZ2580-UP
		(ON LOWER RH CONSOLE)
8T-4121	[3]	WASHER-HARD (11X21X2.5-MM THK)
M		METRIC PART
Y		SEPARATE ILLUSTRATION

#SEBP36540872

251-5811: CONTROL AR-HYDRAULIC

CONTROL AR-HYDRAULIC

251-5811 CONTROL AR-HYDRAULIC -AUTO CARRY
S/N KPZ1-UP
AN ATTACHMENT

i02553471 SEBP3654

For full view, you need register

Parts for your D8T TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
247-0747 Y	[1]	CONTROL GP-JOYSTICK (BULLDOZER)
		S/N KPZ1-1140
242-6209 Y	[1]	CONTROL GP-JOYSTICK (BULLDOZER)
		S/N KPZ1141-UP
252-5788 Y	[1]	SENSOR & MOUNTING GP (AUTO CARRY)
260-6231 Y	[1]	WIRING GP-PLATFORM (AUTO CARRY)

252-5830	[1]	GUARD AS

260-1453	[1]	CONFIGURATION-PREMIUM (AUTO CARRY)
		(DLR INSTALL CONFIG: SEE IRM: EES03-01)
Y		SEPARATE ILLUSTRATION

#SEBP36540873

209-8378: COOLER GP-HYDRAULIC OIL

COOLER GP-HYDRAULIC OIL

209-8378 COOLER GP-HYDRAULIC OIL
S/N KPZ1-UP
PART OF 209-5457 INSTALLATION AR-ENGINE
ALSO AN ATTACHMENT

i01967877 SEBP3654

2098378 COOLER GP-HYDRAULIC OIL Parts scheme

For full view, you need register

Parts for your D8T TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	297-5587	[1]	BRACKET AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
2.	303-8791	[1]	CORE AS-OIL COOLER
	124-8335	[1]	VALVE AS-CONTROL
	4F-7391	[1]	SEAL-O-RING
3.	7X-7729	[7]	WASHER (11X25X3-MM THK)
4.	8T-4133 M	[2]	NUT (M10X1.5-THD)
5.	8T-4195 M	[5]	BOLT (M10X1.5X30-MM)
	M		METRIC PART

#SEBP36540874

231-1466: COVER GP-REAR HYDRAULIC

COVER GP-REAR HYDRAULIC

231-1466 COVER GP-REAR HYDRAULIC
S/N KPZ1-UP
PART OF 270-5085 HYDRAULIC AR-3 VALVE
AN ATTACHMENT

i02351002 SEBP3654

2311466 COVER GP-REAR HYDRAULIC Parts scheme

For full view, you need register

Parts for your D8T TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5T-1352	[6]	SPACER (34X55X12-MM THK)
2.	215-4196	[1]	BAR
3.	231-1468	[1]	COVER AS-REAR
3A.	1F-0748	[1]	NUT-WELD (1/2-13-THD)
3B.	1K-8850	[2]	SPRING
3C.	4K-8501	[4]	CLIP
3D.	7G-4262	[1]	HINGE
3E.	7K-3673	[4]	BOSS
3F.	8T-4223	[8]	WASHER-HARD (13.5X25.5X3-MM THK)
3G.	8T-8917	[8]	BOLT (1/2-13X1.25-IN)
3H.	9P-9548	[4]	PIN
3J.	9P-9550	[4]	TUBE
4.	243-4320	[1]	BRACKET AS (RH)
5.	243-4324	[1]	BRACKET AS (LH)
6.	271-8569	[1]	FILM-INSTRUCTION (IMPLEMENT CONNECT, LH)
7.	271-8570	[1]	FILM-INSTRUCTION (IMPLEMENT CONNECT, RH)
8.	2K-3219	[8]	SCREW-DRIVE (NO 6X0.25-IN)
9.	5P-1076	[8]	WASHER-HARD (13.5X30X4-MM THK)
10.	7X-2580 M	[6]	BOLT (M30X3.5X90-MM)
11.	8T-8917	[8]	BOLT (1/2-13X1.25-IN)
	M		METRIC PART

#SEBP36540875

237-7362: CYLINDER & LINES GP-LIFT

CYLINDER & LINES GP-LIFT

237-7362 CYLINDER & LINES GP-LIFT -LH
S/N DZA1-UP; DZB1-UP; DZD1-UP; KPZ1-UP
PART OF 261-2351 BULLDOZER AR-ANGLING, 227-5437 BULLDOZER AR-SEMI-UNIVERSAL, 245-3566 BULLDOZER AR-UNIVERSAL, 486-6685 DISTRIBUTION AR
Type 1
FOR USE WITH @@@@@237-7363@@@@@
AN ATTACHMENT

i01959481 SEBP3654

2377362 CYLINDER & LINES GP-LIFT Parts scheme

For full view, you need register

Parts for your D8T TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	368-6402	[1]	PLATE AS
2.	108-6981 I	[1]	HOSE AS
3.	108-6982 I	[1]	HOSE AS
4.	148-8323	[1]	CONNECTOR AS
	2S-4078	[1]	SEAL-O-RING
	5K-9090	[1]	SEAL-O-RING
	6V-9875	[1]	CONNECTOR
5.	153-6251	[1]	CONNECTOR AS
	4K-1388	[1]	SEAL-O-RING
	6V-8400	[1]	SEAL-O-RING
	9X-8260	[1]	CONNECTOR
6.	238-9612	[1]	BRACKET AS
7.	238-9807	[1]	TUBE AS
8.	250-5861 Y	[1]	CYLINDER GP-BULLDOZER LIFT
9.	8E-6304	[1]	CLIP (SLOT)
10.	4J-0520	[3]	SEAL-O-RING
11.	6V-8149 M	[1]	NUT (M12X1.75-THD)
12.	7X-7729	[6]	WASHER (11X25X3-MM THK)
13.	8C-3206	[2]	FLANGE-HALF
14.	8E-6303	[1]	CLIP (TAB)
15.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
16.	8T-4136 M	[2]	BOLT (M10X1.5X25-MM)
17.	8T-4137 M	[4]	BOLT (M10X1.5X20-MM)
18.	8T-4186 M	[2]	BOLT (M10X1.5X40-MM)
19.	8T-4194 M	[1]	BOLT (M12X1.75X50-MM)
20.	8T-4196 M	[2]	BOLT (M10X1.5X35-MM)
21.	8T-4223	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP36540876

237-7362: CYLINDER & LINES GP-LIFT

CYLINDER & LINES GP-LIFT

i06757634 SEBP3654

For full view, you need register

Parts for your D8T TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	368-6402	[1]	PLATE AS
2.	108-6981 I	[1]	HOSE AS
3.	108-6982 I	[1]	HOSE AS
4.	148-8323	[1]	CONNECTOR AS
	2S-4078	[1]	SEAL-O-RING
	5K-9090	[1]	SEAL-O-RING
	6V-9875	[1]	CONNECTOR
5.	153-6251	[1]	CONNECTOR AS
	4K-1388	[1]	SEAL-O-RING
	6V-8400	[1]	SEAL-O-RING
	9X-8260	[1]	CONNECTOR
6.	238-9612	[1]	BRACKET AS
7.	238-9807	[1]	TUBE AS
8.	250-5861 CY	[1]	CYLINDER GP-BULLDOZER LIFT
9.	8E-6304	[1]	CLIP (SLOT)
10.	4J-0520	[3]	SEAL-O-RING
11.	329-3356 CM	[1]	NUT (M12X1.75-THD)
12.	7X-7729	[6]	WASHER (11X25X3-MM THK)
13.	8C-3206	[2]	FLANGE-HALF
14.	8E-6303	[1]	CLIP (TAB)
15.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
16.	8T-4136 M	[2]	BOLT (M10X1.5X25-MM)
17.	8T-4137 M	[4]	BOLT (M10X1.5X20-MM)
18.	8T-4186 M	[2]	BOLT (M10X1.5X40-MM)
19.	8T-4194 M	[1]	BOLT (M12X1.75X50-MM)
20.	8T-4196 M	[2]	BOLT (M10X1.5X35-MM)
21.	8T-4223	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP36540877

237-7363: CYLINDER & LINES GP-LIFT

CYLINDER & LINES GP-LIFT

237-7363 CYLINDER & LINES GP-LIFT -RH
S/N DZA1-UP; DZB1-UP; DZD1-UP; KPZ1-UP
PART OF 261-2351 BULLDOZER AR-ANGLING, 227-5437 BULLDOZER AR-SEMI-UNIVERSAL, 245-3566 BULLDOZER AR-UNIVERSAL, 486-6685 DISTRIBUTION AR
Type 1
FOR USE WITH @@@@@237-7362@@@@@
AN ATTACHMENT

i01959631 SEBP3654

2377363 CYLINDER & LINES GP-LIFT Parts scheme

For full view, you need register

Parts for your D8T TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	368-6402	[1]	PLATE AS
2.	108-6981 I	[1]	HOSE AS
3.	108-6982 I	[1]	HOSE AS
4.	148-8323	[1]	CONNECTOR AS
	2S-4078	[1]	SEAL-O-RING
	5K-9090	[1]	SEAL-O-RING
	6V-9875	[1]	CONNECTOR
5.	153-6251	[1]	CONNECTOR AS
	4K-1388	[1]	SEAL-O-RING
	6V-8400	[1]	SEAL-O-RING
	9X-8260	[1]	CONNECTOR
6.	238-9612	[1]	BRACKET AS
7.	239-0221	[1]	TUBE AS
8.	250-5861 Y	[1]	CYLINDER GP-BULLDOZER LIFT
9.	8E-6304	[1]	CLIP (SLOT)
10.	4J-0520	[3]	SEAL-O-RING
11.	6V-8149 M	[1]	NUT (M12X1.75-THD)
12.	7X-7729	[6]	WASHER (11X25X3-MM THK)
13.	8C-3206	[2]	FLANGE-HALF
14.	8E-6303	[1]	CLIP (TAB)
15.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
16.	8T-4136 M	[2]	BOLT (M10X1.5X25-MM)
17.	8T-4137 M	[4]	BOLT (M10X1.5X20-MM)
18.	8T-4186 M	[2]	BOLT (M10X1.5X40-MM)
19.	8T-4194 M	[1]	BOLT (M12X1.75X50-MM)
20.	8T-4196 M	[2]	BOLT (M10X1.5X35-MM)
21.	8T-4223	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP36540878

237-7363: CYLINDER & LINES GP-LIFT

CYLINDER & LINES GP-LIFT

i06757635 SEBP3654

For full view, you need register

Parts for your D8T TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	368-6402	[1]	PLATE AS
2.	108-6981 I	[1]	HOSE AS
3.	108-6982 I	[1]	HOSE AS
4.	148-8323	[1]	CONNECTOR AS
	2S-4078	[1]	SEAL-O-RING
	5K-9090	[1]	SEAL-O-RING
	6V-9875	[1]	CONNECTOR
5.	153-6251	[1]	CONNECTOR AS
	4K-1388	[1]	SEAL-O-RING
	6V-8400	[1]	SEAL-O-RING
	9X-8260	[1]	CONNECTOR
6.	238-9612	[1]	BRACKET AS
7.	239-0221	[1]	TUBE AS
8.	250-5861 CY	[1]	CYLINDER GP-BULLDOZER LIFT
9.	8E-6304	[1]	CLIP (SLOT)
10.	4J-0520	[3]	SEAL-O-RING
11.	329-3356 CM	[1]	NUT (M12X1.75-THD)
12.	7X-7729	[6]	WASHER (11X25X3-MM THK)
13.	8C-3206	[2]	FLANGE-HALF
14.	8E-6303	[1]	CLIP (TAB)
15.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
16.	8T-4136 M	[2]	BOLT (M10X1.5X25-MM)
17.	8T-4137 M	[4]	BOLT (M10X1.5X20-MM)
18.	8T-4186 M	[2]	BOLT (M10X1.5X40-MM)
19.	8T-4194 M	[1]	BOLT (M12X1.75X50-MM)
20.	8T-4196 M	[2]	BOLT (M10X1.5X35-MM)
21.	8T-4223	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP36540879

237-9234: CYLINDER AR-DUAL TILT

CYLINDER AR-DUAL TILT

237-9234 CYLINDER AR-DUAL TILT -UNIVERSAL, SEMI-UNIVERSAL BULLDOZER
S/N KPZ1-3629
FOR USE WITH @@@@@227-5437@@@@@, @@@@@227-5439@@@@@, @@@@@245-3567@@@@@, @@@@@245-3566@@@@@
AN ATTACHMENT

i01960715 SEBP3654