IMPLEMENTS
BULLDOZER GPC-FRAME GP
BULLDOZER GP
IMPLEMENTS
BULLDOZER GP
#SEBP36541060
245-3557: BULLDOZER AR-SEMI-UNIVERSAL
245-3557 BULLDOZER AR-SEMI-UNIVERSAL -LOW GROUND PRESSURE
S/N DZC1-UP
AN ATTACHMENT
S/N DZC1-UP
AN ATTACHMENT
For full view, you need register
Parts for your D8T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | Y | [1] | BLADE & EDGE GP-SEMI-UNIVERSAL | |
| 2. | 247-0851 Y | [1] | PUSH ARM GP-STABILIZER | |
| 3. | 247-0852 Y | [1] | TRUNNION GP-BULLDOZER | |
| 4. | 256-4905 Y | [1] | LINES GP-TILT CYLINDER | |
| 4B-4158 F | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| 8T-7371 F | [1] | PLATE-SERIAL NUMBER (BULLDOZER) | ||
| (ON BACK OF MOLDBOARD, NEAR TOP AT RIGHT END) | ||||
| F | NOT SHOWN | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP36541061
245-3566: BULLDOZER AR-UNIVERSAL
For full view, you need register
Parts for your D8T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 227-6315 Y | [1] | MOUNTING GP-CYLINDER | |
| 2. | 237-4368 Y | [1] | PUSH ARM GP-STABILIZER | |
| 3. | 237-4369 Y | [1] | LINES GP-TILT CYLINDER | |
| 4. | 237-4370 Y | [1] | TRUNNION GP-BULLDOZER | |
| 5. | 237-7362 Y | [1] | CYLINDER & LINES GP-LIFT (LH) | |
| 6. | 237-7363 Y | [1] | CYLINDER & LINES GP-LIFT (RH) | |
| 7. | 245-3562 Y | [1] | BLADE & EDGE GP-UNIVERSAL | |
| 8T-7371 F | [1] | PLATE-SERIAL NUMBER (BULLDOZER) | ||
| (ON BACK OF MOLDBOARD, NEAR TOP AT RIGHT END) | ||||
| 4B-4158 F | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| F | NOT SHOWN | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP36541062
245-3567: BULLDOZER AR-UNIVERSAL
For full view, you need register
Parts for your D8T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 237-4368 Y | [1] | PUSH ARM GP-STABILIZER | |
| 2. | 237-4369 Y | [1] | LINES GP-TILT CYLINDER | |
| 3. | 237-4370 Y | [1] | TRUNNION GP-BULLDOZER | |
| 4. | 245-3562 Y | [1] | BLADE & EDGE GP-UNIVERSAL | |
| 8T-7371 F | [1] | PLATE-SERIAL NUMBER (BULLDOZER) | ||
| (ON BACK OF MOLDBOARD, NEAR TOP AT RIGHT END) | ||||
| 4B-4158 F | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| F | NOT SHOWN | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP36541063
159-8142: C-FRAME GP
159-8142 C-FRAME GP
S/N DZD1-UP; KPZ1-UP
TWO PIECE
PART OF 261-2351, 261-2352, 337-7119 BULLDOZER AR-ANGLING
AN ATTACHMENT
S/N DZD1-UP; KPZ1-UP
TWO PIECE
PART OF 261-2351, 261-2352, 337-7119 BULLDOZER AR-ANGLING
AN ATTACHMENT
For full view, you need register
Parts for your D8T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3G-9571 | [2] | KEY | |
| 2. | 193-3063 | [2] | CAP AS-BEARING | |
| 3. | 9W-7602 B | [56] | SHIM (0.8-MM THK) | |
| 4. | 237-4872 | [1] | PIN-PIVOT | |
| 5. | 8T-4131 M | [32] | NUT (M20X2.5-THD) | |
| 6. | 3E-9850 M | [4] | BOLT (M30X3.5X220-MM) | |
| 7. | 163-2013 | [1] | RETAINER | |
| 8. | 7X-2562 M | [2] | BOLT (M20X2.5X45-MM) | |
| 9. | 7X-2565 M | [32] | BOLT (M20X2.5X100-MM) | |
| 10. | 195-6283 M | [4] | NUT-SQUARE (M30X3.5-THD) | |
| 11. | 8T-4123 | [64] | WASHER (22X35X3.5-MM THK) | |
| 12. | 159-8143 | [1] | C-FRAME AS (LH) | |
| 13. | 1J-6744 | [1] | BEARING | |
| 14. | 1U-2533 | [1] | BAR | |
| 15. | 3G-9626 | [1] | END-JOINT | |
| 16. | 7T-5140 | [1] | STEP | |
| 17. | 8E-6443 | [1] | TRUNNION AS | |
| 18. | 8P-9770 | [1] | PLATE | |
| 19. | 158-3650 | [3] | BRACKET | |
| 20. | 159-8144 | [1] | C-FRAME AS (RH) | |
| 21. | 1J-6744 | [1] | BEARING | |
| 22. | 1U-2533 | [1] | BAR | |
| 23. | 7T-5140 | [1] | STEP | |
| 24. | 8E-6444 | [1] | TRUNNION AS | |
| 25. | 8P-9770 | [1] | PLATE | |
| 26. | 159-8939 | [1] | ADAPTER AS | |
| [2] | BUSHING | |||
| 27. | 5M-6214 | [1] | PLUG (1/8-27 PTF) | |
| 28. | 158-3650 | [3] | BRACKET | |
| 29. | 9X-8258 | [4] | WASHER (33X56X6-MM THK) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#SEBP36541064
337-7115: INSTALLATION AR-BULLDOZER
337-7115 INSTALLATION AR-BULLDOZER
S/N KPZ1-UP
CANNOT BE USED WITH LOW GROUND PRESSURE AR
AN ATTACHMENT
S/N KPZ1-UP
CANNOT BE USED WITH LOW GROUND PRESSURE AR
AN ATTACHMENT
For full view, you need register
Parts for your D8T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1U-2472 | [2] | PIN | |
| 2. | 4T-7534 | [2] | PIN | |
| 3. | 6J-5179 | [4] | RETAINER | |
| 4. | 8E-6758 | [2] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 4A. | 8E-6752 | [4] | BUSHING | |
| 5. | 237-4368 Y | [1] | PUSH ARM GP-STABILIZER | |
| 6. | 237-4369 Y | [1] | LINES GP-TILT CYLINDER | |
| 7. | 237-4370 Y | [1] | TRUNNION GP-BULLDOZER | |
| 8. | 7X-2574 M | [8] | BOLT (M24X3X45-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP36541065
337-7120: INSTALLATION AR-BULLDOZER
For full view, you need register
Parts for your D8T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1U-2472 | [2] | PIN | |
| 2. | 4T-7534 | [2] | PIN | |
| 3. | 6J-5179 | [4] | RETAINER | |
| 4. | 8E-6758 | [2] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 8E-6752 | [4] | BUSHING | ||
| 5. | 247-0851 Y | [1] | PUSH ARM GP-STABILIZER | |
| 6. | 247-0852 Y | [1] | TRUNNION GP-BULLDOZER | |
| 7. | 256-4905 Y | [1] | LINES GP-TILT CYLINDER | |
| 8. | 7X-2574 M | [8] | BOLT (M24X3X45-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP36541066
239-3340: LINK GP-STABILIZER
239-3340 LINK GP-STABILIZER
S/N DZA1-UP; DZB1-UP; KPZ1-UP
PART OF 237-4368, 237-9236 PUSH ARM GP-STABILIZER
AN ATTACHMENT
S/N DZA1-UP; DZB1-UP; KPZ1-UP
PART OF 237-4368, 237-9236 PUSH ARM GP-STABILIZER
AN ATTACHMENT
For full view, you need register
Parts for your D8T TRACK-TYPE TRACTOR:
CATERPILLAR SIS#SEBP36541067
256-4901: LINK GP-STABILIZER
256-4901 LINK GP-STABILIZER
S/N DZC1-UP; KPZ1-UP
LOW GROUND PRESSURE
PART OF 247-0851, 261-4801 PUSH ARM GP-STABILIZER
AN ATTACHMENT
S/N DZC1-UP; KPZ1-UP
LOW GROUND PRESSURE
PART OF 247-0851, 261-4801 PUSH ARM GP-STABILIZER
AN ATTACHMENT
For full view, you need register
Parts for your D8T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6I-8675 B | [52] | SHIM (0.6-MM THK) | |
| 2. | 160-6307 | [2] | CAP-BEARING | |
| 3. | 256-4902 | [1] | LINK AS | |
| 3A. | 8P-9770 | [1] | PLATE | |
| 3B. | 239-4263 | [2] | BEARING | |
| 3C. | 239-9275 | [4] | BLOCK | |
| 3D. | 239-9670 | [3] | BLOCK | |
| 4. | 7X-2578 M | [8] | BOLT (M24X3X200-MM) | |
| 5. | 8T-4001 M | [8] | NUT (M24X3-THD) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#SEBP36541068
245-3559: MODIFICATION AR-BULLDOZER
245-3559 MODIFICATION AR-BULLDOZER -SEMI-UNIVERSAL
S/N KPZ1-UP
WITH TRASH RACK
AN ATTACHMENT
S/N KPZ1-UP
WITH TRASH RACK
AN ATTACHMENT
For full view, you need register
Parts for your D8T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | Y | [1] | BLADE AS-SEMI-UNIVERSAL | |
| 2. | 7T-5558 Y | [1] | EDGE GP-BIT & CUTTING (SEMI-UNIVERSAL) | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP36541069
239-4212: PUSH ARM GP
239-4212 PUSH ARM GP -BULLDOZER-LH
S/N DZA1-UP; DZB1-UP; DZC1-UP; KPZ1-UP
PART OF 237-4368, 247-0851 PUSH ARM GP-STABILIZER
AN ATTACHMENT
S/N DZA1-UP; DZB1-UP; DZC1-UP; KPZ1-UP
PART OF 237-4368, 247-0851 PUSH ARM GP-STABILIZER
AN ATTACHMENT
For full view, you need register
Parts for your D8T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9X-8258 | [2] | WASHER (33X56X6-MM THK) | |
| 2. | 193-3063 | [1] | CAP AS-BEARING | |
| 3. | 195-6283 M | [2] | NUT-SQUARE (M30X3.5-THD) | |
| 4. | 239-4215 | [1] | PUSH ARM AS (LH) | |
| 4A. | 364-3057 | [1] | STEP AS | |
| 4B. | 109-5675 | [1] | BRACKET AS (LH) | |
| 4C. | 3G-9598 | [2] | BUSHING | |
| 4D. | 1J-6740 | [1] | BEARING AS | |
| 4E. | 239-4218 | [1] | BRACKET AS | |
| 4F. | 9W-7602 B | [26] | SHIM (0.8-MM THK) | |
| 5. | 3E-9850 M | [2] | BOLT (M30X3.5X220-MM) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
