AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

259-5747 CONTROL GP-HANDLE -BULLDOZER, IMPLEMENT S/N KPZ1141-UP PART OF 242-6209, 327-3546 CONTROL GP-JOYSTICK AN ATTACHMENT D8T


OPERATOR STATION
CONTROL GP-HANDLE
CONTROL GP

TRACK-TYPE TRACTOR D8T TRACK-TYPE TRACTOR KPZ
 D8T TRACK-TYPE TRACTOR KPZ00001-UP (MACHINE) POWERED BY C15 Engine SEBP3654 D8T KPZ   (2004)

OPERATOR STATION

CONTROL GP-HANDLE
CONTROL GP-HANDLE
240-7837 CONTROL GP-HANDLE
CONTROL GP-HANDLE
259-5746 CONTROL GP-HANDLE
CONTROL GP-HANDLE
259-5747 CONTROL GP-HANDLE
CONTROL GP-HANDLE
259-5751 CONTROL GP-HANDLE
CONTROL GP-HANDLE
267-8667 CONTROL GP-HANDLE
CONTROL GP-HANDLE
309-9542 CONTROL GP-HANDLE
 

#SEBP36541130
 

259-5747: CONTROL GP-HANDLE

259-5747 CONTROL GP-HANDLE -BULLDOZER, IMPLEMENT
S/N KPZ1141-UP
PART OF 242-6209, 327-3546 CONTROL GP-JOYSTICK
AN ATTACHMENT
i02550191 SEBP3654
2595747 CONTROL GP-HANDLE Parts scheme
  For full view, you need register

Parts for your D8T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 144-0331 [3] CAP-PUSH BUTTON (YELLOW)  
2. 268-3695 [1] ADAPTER-RING  
3. 1S-9593 [1] STRAP-CABLE  
4. 218-7136 E SLEEVE (63-CM)  
5. 8T-8737 [5] PLUG-SEAL  
6. 186-3735 [7] PIN-CONNECTOR (16-GA TO 18-GA)  
7. 174-3091 [1] KIT-RECEPTACLE (12-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  E   ORDER BY THE CENTIMETER
 

#SEBP36541131
 

259-5751: CONTROL GP-HANDLE

259-5751 CONTROL GP-HANDLE -BULLDOZER, DUAL TILT
S/N KPZ1-1455
PART OF 242-6208 CONTROL GP-JOYSTICK
AN ATTACHMENT
i02435116 SEBP3654
2595751 CONTROL GP-HANDLE Parts scheme
  For full view, you need register

Parts for your D8T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. Z [1] HANDGRIP AS  
2. 175-4165 [2] SCREW-PAN HEAD (4-20X0.5-IN)  
3. 144-0331 [1] CAP-PUSH BUTTON (YELLOW)(MODE SELECT)  
3A. 144-0331 [1] CAP-PUSH BUTTON (YELLOW)(MANUAL MODE)  
4. 164-6964 [1] HOUSING AS  
5. 162-8387 [1] LEVER  
6. 9B-1117 [2] LOCKWASHER  
7. 162-8389 [1] PLATE (SWITCH)  
8. 175-4170 [2] SCREW-PAN HEAD (6-19X1.625-IN)  
9. 218-7136 E SLEEVE (63-CM)  
10. 179-7376 [1] SWITCH AS-PUSH BUTTON (DUAL TILT, SINGLE TILT)  
  5P-8435 E WIRE (22-GA)(14-CM)  
  162-8378 [1] SWITCH AS-PUSH BUTTON (DUAL TILT, SINGLE TILT)  
10A. 144-0331 [1] CAP-PUSH BUTTON (YELLOW)(DUAL TILT, SINGLE TILT)  
11. 174-3091 [1] KIT-RECEPTACLE (12-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
12. 8T-8737 [1] PLUG-SEAL  
13. 186-3735 [11] PIN-CONNECTOR (16-GA TO 18-GA)  
14. 268-3695 [1] ADAPTER-RING  
15. 1S-9593 [1] STRAP-CABLE  
  E   ORDER BY THE CENTIMETER
  Z   NOT SERVICED SEPARATELY
 

#SEBP36541132
 

267-8667: CONTROL GP-HANDLE

267-8667 CONTROL GP-HANDLE
S/N KPZ1-1140
FIELD REPLACEMENT FOR @@@@@208-6070@@@@@
i02634052 SEBP3654
2678667 CONTROL GP-HANDLE Parts scheme
  For full view, you need register

Parts for your D8T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 162-8387 [1] LEVER  
2. 162-8389 [1] PLATE (SWITCH)  
3. 175-4165 [2] SCREW-PAN HEAD (4-20X0.5-IN)  
4. 179-7376 [1] SWITCH AS-PUSH BUTTON (BLADE TILT)  
4A. 144-0331 [1] CAP-PUSH BUTTON (YELLOW)  
5. 345-7992 [1] HOUSING AS  
6. 144-0331 [2] CAP-PUSH BUTTON (YELLOW)  
7. 175-4170 [2] SCREW-PAN HEAD (6-19X1.625-IN)  
8. 218-7136 E SLEEVE (63-CM)  
9. 9B-1117 [2] LOCKWASHER  
10. 1S-9593 [1] STRAP-CABLE  
11. 8T-8729 [1] PIN-CONNECTOR (16-GA TO 18-GA)  
  E   ORDER BY THE CENTIMETER
 

#SEBP36541133
 

309-9542: CONTROL GP-HANDLE

309-9542 CONTROL GP-HANDLE -BULLDOZER, DUAL TILT
S/N KPZ2580-UP
PART OF 314-7612, 327-3548 CONTROL GP-JOYSTICK
FIELD REPLACEMENT ORDER @@@@@445-9518@@@@@
AN ATTACHMENT
i02838112 SEBP3654
3099542 CONTROL GP-HANDLE Parts scheme
  For full view, you need register

Parts for your D8T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 162-8387 [1] LEVER  
2. 162-8389 [1] PLATE (SWITCH)  
3. 175-4165 [2] SCREW-PAN HEAD (4-20X0.5-IN)  
4. 179-7376 [1] SWITCH AS-PUSH BUTTON (DUAL TILT, SINGLE TILT)  
  162-8378 [1] SWITCH AS-PUSH BUTTON (DUAL TILT, SINGLE TILT)  
  144-0331 [1] CAP-PUSH BUTTON (YELLOW)  
5. 175-4170 [2] SCREW-PAN HEAD (6-19X1.625-IN)  
6. 9B-1117 [2] LOCKWASHER  
7. 1S-9593 [2] STRAP-CABLE  
8. 102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
9. 8T-8737 [1] PLUG-SEAL  
10. 174-3091 [1] KIT-RECEPTACLE (12-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
11. 345-7991 [1] HOUSING AS  
12. 8T-8729 [11] PIN-CONNECTOR (16-GA TO 18-GA)  
13. 218-7136 E SLEEVE (63-CM)  
14. 144-0331 [1] CAP-PUSH BUTTON (YELLOW)(MODE SELECT)  
14A. 144-0331 [1] CAP-PUSH BUTTON (YELLOW)(MANUAL MODE)  
15. 276-4878 [1] GROMMET  
  E   ORDER BY THE CENTIMETER
 

#SEBP36541134
 

319-1858: CONTROL GP-HANDLE

319-1858 CONTROL GP-HANDLE -BULLDOZER, IMPLEMENT
S/N KPZ1-UP
PART OF 319-1859, 327-3550, 457-4645 CONTROL GP-JOYSTICK
AN ATTACHMENT
i02992229 SEBP3654
3191858 CONTROL GP-HANDLE Parts scheme
  For full view, you need register

Parts for your D8T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 162-8387 [1] LEVER  
2. 162-8389 [1] PLATE (SWITCH)  
3. 175-4165 [2] SCREW-PAN HEAD (4-20X0.5-IN)  
4. 179-7376 [1] SWITCH AS-PUSH BUTTON (IMPLEMENT)  
  162-8378 [1] SWITCH AS-PUSH BUTTON (IMPLEMENT)  
  144-0331 [1] CAP-PUSH BUTTON (YELLOW)  
  5P-8435 E WIRE (22-GA)(14-CM)  
5. 175-4170 [2] SCREW-PAN HEAD (6-19X1.625-IN)  
6. 9B-1117 [2] LOCKWASHER  
7. 1S-9593 [2] STRAP-CABLE  
8. 102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
9. 8T-8737 [1] PLUG-SEAL  
10. 174-3091 [1] KIT-RECEPTACLE (12-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
11. 232-3870 [1] HOUSING AS  
12. 186-3735 [11] PIN-CONNECTOR (16-GA TO 18-GA)  
13. 218-7136 E SLEEVE (63-CM)  
14. 144-0331 [3] CAP-PUSH BUTTON (YELLOW)  
15. 276-4878 [1] GROMMET  
  E   ORDER BY THE CENTIMETER
 

#SEBP36541135
 

337-6853: CONTROL GP-HANDLE

337-6853 CONTROL GP-HANDLE
S/N KPZ1-UP
PART OF 237-0160 CONTROL GP-STEER CLUTCH & BRK
ALSO AN ATTACHMENT
i03652316 SEBP3654
3376853 CONTROL GP-HANDLE Parts scheme
  For full view, you need register

Parts for your D8T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1N-5724 [2] BOLT (6-32X0.5-IN)  
2. 112-0858 [2] BEARING  
3. 208-9647 [1] KNOB (PARKING BRAKE)  
4. 214-1962 [1] HOUSING  
5. 216-0380 [1] PLATE  
6. 223-2115 Y [1] CONTROL GP-PARKING BRAKE  
7. 225-3195 [1] GASKET  
8. 257-7285 [1] SWITCH AS-ROCKER (PARKING BRAKE ON, OFF)  
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8737 [2] PLUG-SEAL  
  9X-3401 [6] PIN-CONNECTOR (16-GA TO 18-GA)  
9. 337-6855 Y [1] CONTROL GP-HANDLE (STEERING, TRANSMISSION)  
10. 166-3777 M [3] SCREW-BUTTON HEAD (M6X1X28-MM)  
11. 5C-2890 M [1] NUT (M6X1-THD)  
12. 8T-4138 M [2] BOLT (M6X1X20-MM)  
13. 8T-5410 [1] SEAL-LIP TYPE  
14. 307-2338 E SLEEVE (45-CM)  
15. 339-6185 B TAPE  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36541136
 

337-6855: CONTROL GP-HANDLE

337-6855 CONTROL GP-HANDLE
S/N KPZ1-UP
PART OF 337-6853 CONTROL GP-HANDLE
ALSO AN ATTACHMENT
i03652325 SEBP3654
3376855 CONTROL GP-HANDLE Parts scheme
  For full view, you need register

Parts for your D8T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 151-9275 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
2. 3S-2093 [2] STRAP-CABLE  
3. 6V-3545 [1] BEARING-ROLLER  
4. 186-3735 [6] PIN-CONNECTOR (16-GA TO 18-GA)  
5. 9W-1464 [2] SCREW (1/4-20X1-IN)  
6. 9X-4610 [1] SEAL-V-RING  
7. 130-3265 M [1] SCREW (M6X1X20-MM)  
8. 131-0447 [2] NUT-SPECIAL (15/32-32-THD)  
9. 132-7419 [1] SWITCH AS-PUSH BUTTON (DOWNSHIFT)  
  144-0331 [1] CAP-PUSH BUTTON (YELLOW)  
10. 132-7450 [1] SWITCH AS-PUSH BUTTON (UPSHIFT)  
  144-0331 [1] CAP-PUSH BUTTON (YELLOW)  
12. 158-2734 [2] SPRING  
13. 158-2735 [1] BASE  
17. [1] FILM-IDENTIFICATION (JOYSTICK CONTROL)(TRANSMISSION CONTROL)  
18. 226-9423 [2] SPRING  
19. 266-1476 [1] SENSOR GP-POSITION (FORWARD, NEUTRAL, REVERSE)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8737 [1] PLUG-SEAL  
  180-9339 [3] PIN-CONNECTOR (14-GA TO 18-GA)  
20. 334-1953 [1] ANGLE  
21. 337-9001 [1] SWITCH GP-LIMIT (STEERING)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  6V-2689 D TUBE-HEAT SHRINK (6.35-MM DIA)(0.1-M)  
  186-3735 [6] PIN-CONNECTOR (16-GA TO 18-GA)  
22. 103-6262 [4] SCREW-MACHINE (4-40X0.63-IN)  
23. 5H-9899 [1] RING-RETAINING (EXTERNAL)  
24. 6V-1051 [1] SCREW-BUTTON HEAD (10-24X19.05-MM)  
25. 6V-1232 [2] SCREW-BUTTON HEAD (8-32X9.52-MM)  
26. 6V-2314 M [2] BOLT (M5X0.8X35-MM)  
27. 7X-0584 [1] WASHER-HARD (13.5X20.5X2-MM THK)  
28. 7Y-5226 M [2] NUT (M5X0.8-THD)  
29. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
30. 9X-8256 [5] WASHER (6.6X12X2-MM THK)  
31. 6V-2689 D TUBE-HEAT SHRINK (6.35-MM DIA)(0.2-M)  
  D   ORDER BY THE METER
  M   METRIC PART
 

#SEBP36541137
 

445-9518: CONTROL GP-HANDLE

445-9518 CONTROL GP-HANDLE -BULLDOZER, DUAL TILT
S/N KPZ2580-UP
PART OF 457-4643 CONTROL GP-JOYSTICK
FIELD REPLACEMENT FOR @@@@@309-9542@@@@@
AN ATTACHMENT
i06101148 SEBP3654
4459518 CONTROL GP-HANDLE Parts scheme
  For full view, you need register

Parts for your D8T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 162-8387 [1] LEVER  
2. 162-8389 [1] PLATE (SWITCH)  
3. 175-4165 [2] SCREW-PAN HEAD (4-20X0.5-IN)  
4. 179-7376 [1] SWITCH AS-PUSH BUTTON (DUAL TILT, SINGLE TILT)  
  162-8378 [1] SWITCH AS-PUSH BUTTON (DUAL TILT, SINGLE TILT)  
  144-0331 [1] CAP-PUSH BUTTON (YELLOW)  
5. 175-4170 [2] SCREW-PAN HEAD (6-19X1.625-IN)  
6. 9B-1117 [2] LOCKWASHER  
7. 1S-9593 [2] STRAP-CABLE  
8. 102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
9. 8T-8737 [1] PLUG-SEAL  
10. 174-3091 [1] KIT-RECEPTACLE (12-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
11. 434-3203 [1] HOUSING GP-LEVER  
12. 8T-8729 [11] PIN-CONNECTOR (16-GA TO 18-GA)  
13. 218-7136 E SLEEVE (63-CM)  
14. 144-0331 [1] CAP-PUSH BUTTON (YELLOW)(MODE SELECT)  
14A. 144-0331 [1] CAP-PUSH BUTTON (YELLOW)(MANUAL MODE)  
15. 276-4878 [1] GROMMET  
  E   ORDER BY THE CENTIMETER
 

#SEBP36541138
 

208-6072: CONTROL GP-JOYSTICK

208-6072 CONTROL GP-JOYSTICK -BULLDOZER, DUAL TILT
S/N KPZ1-1140
PART OF 209-5102 CONTROL AR-HYDRAULIC
AN ATTACHMENT
i01953559 SEBP3654
2086072 CONTROL GP-JOYSTICK Parts scheme
  For full view, you need register

Parts for your D8T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 192-4658 M [4] SCREW-PAN HEAD (M4X0.7X20-MM)  
2. 193-4476 M [8] SCREW-PAN HEAD (M4X0.7X35-MM)  
3. 206-7421 [1] BASE AS  
  205-2941 [4] SCREW-SPECIAL (SELF LOCKING)  
  175-1529 [1] BOOT  
4. 208-6070 Y [1] CONTROL GP-HANDLE (BULLDOZER, DUAL TILT)  
5. 216-3002 [1] DETENT GP-CONTROL (BULLDOZER TILT)  
6. 227-6718 [1] DETENT GP-CONTROL (BULLDOZER LIFT, LOWER)  
7. 151-4977 [12] WASHER (4.445X9.525X1.092-MM THK)  
8. 175-3265 [1] SCREW (8-16X0.63-IN)  
9. 257-2529 [1] SENSOR GP-POSITION (BULLDOZER TILT)  
10. 257-2532 [1] SENSOR-POSITION (BULLDOZER LIFT, LOWER)  
11. 2K-4898 [1] CLAMP-TUBE  
12. 4B-9808 [2] SETSCREW (1/4-20X0.5-IN)  
13. 186-3735 [11] PIN-CONNECTOR (16-GA TO 18-GA)  
14. 8T-8737 [1] PLUG-SEAL  
15. 174-3091 [1] KIT-RECEPTACLE (12-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
16. 208-6081 [1] SLEEVE  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36541139
 

208-6074: CONTROL GP-JOYSTICK

208-6074 CONTROL GP-JOYSTICK -BULLDOZER, SINGLE TILT
S/N KPZ1-1140
PART OF 206-6782 HYDRAULIC AR
ALSO AN ATTACHMENT
i01961868 SEBP3654
2086074 CONTROL GP-JOYSTICK Parts scheme
  For full view, you need register

Parts for your D8T TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 188-1079 [1] CONTROL GP-HANDLE (BULLDOZER)  
2. 192-4658 M [4] SCREW-PAN HEAD (M4X0.7X20-MM)  
3. 193-4476 M [8] SCREW-PAN HEAD (M4X0.7X35-MM)  
4. 175-1529 [1] BOOT  
4A. 205-2941 [4] SCREW-SPECIAL (SELF LOCKING)  
5. 216-3002 [1] DETENT GP-CONTROL (BULLDOZER TILT)  
6. 227-6718 [1] DETENT GP-CONTROL (BULLDOZER LIFT, LOWER)  
7. 257-2529 [1] SENSOR GP-POSITION (BULLDOZER TILT)  
8. 257-2532 [1] SENSOR-POSITION (BULLDOZER LIFT, LOWER)  
9. 151-4977 [12] WASHER (4.445X9.525X1.092-MM THK)  
10. 4B-9808 [2] SETSCREW (1/4-20X0.5-IN)  
  M   METRIC PART
 

Information:

Caterpillar Parts SIS Catalog D8T :

CONTROL GP-HANDLE
259-5746 CONTROL GP-HANDLE
CONTROL GP-HANDLE
240-7837 CONTROL GP-HANDLE
CONTROL GP-HANDLE
222-1546 CONTROL GP-HANDLE
CONTROL GP-HANDLE
209-2608 CONTROL GP-HANDLE
CONTROL GP-HANDLE
209-2608 CONTROL GP-HANDLE
CONTROL GP-HANDLE
208-6070 CONTROL GP-HANDLE
CONTROL & MTG GP-PEDAL
263-3318 CONTROL & MTG GP-PEDAL
CONTROL & MTG GP-PEDAL
263-3318 CONTROL & MTG GP-PEDAL
CONTROL GP-HANDLE
259-5751 CONTROL GP-HANDLE
CONTROL GP-HANDLE
267-8667 CONTROL GP-HANDLE
CONTROL GP-HANDLE
309-9542 CONTROL GP-HANDLE
CONTROL GP-HANDLE
319-1858 CONTROL GP-HANDLE
CONTROL GP-HANDLE
337-6853 CONTROL GP-HANDLE
CONTROL GP-HANDLE
337-6855 CONTROL GP-HANDLE
CONTROL GP-HANDLE
445-9518 CONTROL GP-HANDLE
CONTROL GP-JOYSTICK
208-6072 CONTROL GP-JOYSTICK
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.