293-4440 COVER GP-REAR HOUSING S/N EHX3108-UP PART OF 212-2737, 271-2219, 271-2220, 360-3754 ENGINE AR-COMPLETE ALSO AN ATTACHMENT D10T

Pos.	Part No	Qty	Parts name
1.	4N-1114	[1]	COVER
2.	6V-5553	[2]	SEAL-O-RING
3.	9Y-6089	[1]	GASKET
4.	227-5538	[1]	SEAL-O-RING
5.	230-4157	[2]	COVER
6.	273-8703	[1]	COVER
7.	234-8937	[2]	SEAL-INTEGRAL
8.	0S-0509	[7]	BOLT (3/8-16X0.75-IN)
9.	0S-1566	[3]	BOLT (5/8-11X1.5-IN)
10.	0S-1619	[2]	BOLT (3/8-16X3-IN)
11.	1A-2029	[6]	BOLT (3/8-16X1.125-IN)
12.	2P-2772	[2]	COVER
13.	5M-2894	[16]	WASHER-HARD (10.2X18.5X2.5-MM THK)
14.	5P-8247	[3]	WASHER-HARD (17X32X3.5-MM THK)
15.	0L-1351	[1]	BOLT (3/8-16X0.875-IN)
16.	4P-7429	[1]	CLIP (LADDER)

#SEBP36550051

234-1622: COVER GP-VALVE MECHANISM

234-1622 COVER GP-VALVE MECHANISM
S/N EHX1-3107
PART OF 212-2737, 212-2744, 271-2219, 271-2220 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT

i02044822 SEBP3655

2341622 COVER GP-VALVE MECHANISM Parts scheme

For full view, you need register

Parts for your D10T TRACK-TYPE TRACTOR:

Pos.	Part No	Qty	Parts name
1.	212-7728	[36]	ISOLATOR AS
2.	224-7506	[6]	SEAL-VALVE COVER
3.	224-9907	[5]	STUD (5/16-18-THD)
4.	345-2009	[6]	COVER
5.	198-4776	[4]	WASHER-HARD (8.8X20X8-MM THK)
6.	5P-4116	[4]	WASHER-HARD (8.8X20.5X2-MM THK)
7.	7X-0440	[27]	BOLT (5/16-18X1.75-IN)
8.	8T-4224	[32]	WASHER-HARD (8.8X16X2-MM THK)
9.	8T-8912	[4]	BOLT (5/16-18X2.25-IN)

#SEBP36550052

279-8129: COVER GP-VALVE MECHANISM

279-8129 COVER GP-VALVE MECHANISM
S/N EHX3108-UP
PART OF 212-2737, 271-2219, 271-2220, 360-3754 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT

i02613396 SEBP3655

2798129 COVER GP-VALVE MECHANISM Parts scheme

For full view, you need register

Parts for your D10T TRACK-TYPE TRACTOR:

Pos.	Part No	Qty	Parts name
1.	2N-8109	[2]	CLAMP
2.	126-0559	[4]	BOLT (5/16-18X1.25-IN)
3.	212-7728	[36]	ISOLATOR AS
4.	345-2010	[2]	COVER
5.	224-7506	[6]	SEAL-VALVE COVER
6.	224-9907	[4]	STUD (5/16-18-THD)
7.	345-2009	[4]	COVER
8.	345-2012	[2]	ELBOW
9.	4N-4668	[2]	BREATHER AS (CRANKCASE)
10.	198-4776	[4]	WASHER-HARD (8.8X20X8-MM THK)
11.	5P-4116	[4]	WASHER-HARD (8.8X20.5X2-MM THK)
12.	5P-8211	[2]	SEAL-O-RING
13.	6V-3831	[2]	SEAL-O-RING
14.	7X-0440	[28]	BOLT (5/16-18X1.75-IN)
15.	8T-4224	[32]	WASHER-HARD (8.8X16X2-MM THK)
16.	8T-8912	[4]	BOLT (5/16-18X2.25-IN)

#SEBP36550053

445-1221: COVER GP-VALVE MECHANISM

445-1221 COVER GP-VALVE MECHANISM
S/N EHX1-UP
PART OF 212-2737, 271-2219, 271-2220 ENGINE AR-COMPLETE
Type 1
FOR USE WITH D10 TIER III ENGINE
ALSO AN ATTACHMENT

i05607909 SEBP3655

4451221 COVER GP-VALVE MECHANISM Parts scheme

For full view, you need register

Parts for your D10T TRACK-TYPE TRACTOR:

Pos.	Part No	Qty	Parts name
1.	2N-8109	[2]	CLAMP
2.	4N-4668	[2]	BREATHER AS (CRANKCASE)
3.	4P-8525	[36]	SPACER (9X16X30-MM THK)
4.	126-0559	[4]	BOLT (5/16-18X1.25-IN)
5.	224-9907	[7]	STUD (5/16-18-THD)
6.	345-2012	[2]	ELBOW
7.	449-9059	[6]	SEAL
8.	448-3693	[2]	COVER-VALVE MECHANISM
9.	448-3694	[2]	COVER AS-VALVE MECHANISM
10.	448-3695	[1]	COVER AS-VALVE MECHANISM
10A.	448-3693	[1]	COVER-VALVE MECHANISM
11.	5P-8211	[2]	SEAL-O-RING
12.	6V-3831	[2]	SEAL-O-RING
13.	7X-0440	[29]	BOLT (5/16-18X1.75-IN)

#SEBP36550054

445-1221: COVER GP-VALVE MECHANISM

445-1221 COVER GP-VALVE MECHANISM
S/N EHX1-UP
PART OF 212-2737, 271-2219, 271-2220 ENGINE AR-COMPLETE
Type 2
FOR USE WITH D10 TIER III ENGINE
ALSO AN ATTACHMENT

i06677116 SEBP3655

For full view, you need register

Parts for your D10T TRACK-TYPE TRACTOR:

Pos.	Part No	Qty	Parts name
1.	2N-8109	[2]	CLAMP
2.	4N-4668	[2]	BREATHER AS (CRANKCASE)
3.	4P-8525	[36]	SPACER (9X16X30-MM THK)
4.	224-9907	[7]	STUD (5/16-18-THD)
5.	491-4030	[3]	COVER
6.	491-4672	[1]	COVER
7.	449-9059	[6]	SEAL
8.	492-1760 C	[2]	COVER AS (VALVE MECHANISM)
9.	482-0106 C	[2]	ELBOW
10.	126-0559 C	[8]	BOLT (5/16-18X1.25-IN)
11.	061-9457 C	[2]	SEAL-O-RING
12.	6V-3831	[2]	SEAL-O-RING
13.	7X-0440	[29]	BOLT (5/16-18X1.75-IN)
	C		CHANGE FROM PREVIOUS TYPE

#SEBP36550055

225-6052: CRANKSHAFT GP

CRANKSHAFT GP

225-6052 CRANKSHAFT GP
S/N EHX1-UP
PART OF 260-9527, 261-1507, 276-9586, 276-9587, 350-5500, 350-5503 ENGINE AR-CORE
ALSO AN ATTACHMENT

i02041101 SEBP3655

For full view, you need register

Parts for your D10T TRACK-TYPE TRACTOR:

Pos.	Part No	Qty	Parts name
1.	253-1752 J	[2]	PLATE-THRUST
2.	319-7401 Y	[1]	SEAL GP-CRANKSHAFT (FRONT)
3.	317-8766 J	[7]	BEARING-MAIN (STANDARD)
	4W-5698 AB		BEARING-MAIN (0.63-MM US)
	4W-5699 AB		BEARING-MAIN (1.27-MM US)
	4W-5700 AB		BEARING-MAIN (0.63-MM OS)
	4W-5701 AB		BEARING-MAIN (0.63-MM OS, 0.63-MM US)
4.	384-9907	[1]	CRANKSHAFT AS
4A.	4N-0684	[1]	DOWEL
4B.	7S-5005	[1]	DOWEL
4C.	223-9135	[1]	GEAR-CRANKSHAFT (99-TEETH)

			AVAILABLE REPAIR KIT(S):
	243-6718 AJ		KIT-CRANKSHAFT BEARING (STANDARD)
			(KIT INCLUDES A COMPLETE SET OF MAIN BEARINGS & THRUST PLATES)
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED
	J		KIT MARKED J INCLUDES PART(S) MARKED J
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP36550056

230-7181: CYLINDER BLOCK AS

230-7181 CYLINDER BLOCK AS
S/N EHX1-UP
PART OF 230-7182 CYLINDER BLOCK AS
ALSO AN ATTACHMENT

i02043816 SEBP3655

For full view, you need register

Parts for your D10T TRACK-TYPE TRACTOR:

Pos.	Part No	Qty	Parts name
1.	3P-1323	[14]	BOLT-BEARING CAP (7/8-14X7.75-IN)
2.	225-5965	[4]	SLEEVE
3.	225-5966	[1]	SLEEVE
4.	9H-1031	[14]	WASHER-HARD (24X41.5X6-MM THK)
5.	232-7607	[7]	CAP-CRANKSHAFT
6.	234-6902	[14]	BOLT-12 POINT HEAD (M11X1.25X50-MM)
7.	7W-6492	[2]	PLUG-PIPE (1/2-14-THD)
8.	4N-0685	[1]	BUSHING (1-IN WIDE)
9.	4N-6658	[1]	BUSHING (1.3-IN WIDE)

	6I-4361 ABFN		INSERT-LINER SEAT (0.772-MM THK)
	9Y-3368 ABFN		INSERT-LINER SEAT (0.822-MM THK)
	6I-4362 ABFN		INSERT-LINER SEAT (0.872-MM THK)
	6I-4363 ABFN		INSERT-LINER SEAT (1.555-MM THK)
	2W-3815 ABFN		INSERT-LINER SEAT (1.605-MM THK)
	6I-4364 ABFN		INSERT-LINER SEAT (1.655-MM THK)
	6I-4365 ABFN		INSERT-LINER SEAT (2.66-MM THK)
	5N-0093 ABFN		INSERT-LINER SEAT (2.71-MM THK)
	6I-4366 ABFN		INSERT-LINER SEAT (2.76-MM THK)
	101-0524 ABFN		INSERT-LINER SEAT (5.16-MM THK)
	101-0523 ABFN		INSERT-LINER SEAT (5.21-MM THK)
	101-0525 ABFN		INSERT-LINER SEAT (5.26-MM THK)
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED
	F		NOT SHOWN
	N		FOR SALVAGE OF DAMAGED LIFTER BORES IN CYLINDER BLOCK REFER TO SEBF8076 IN SISWEB

#SEBP36550057

230-7182: CYLINDER BLOCK AS

230-7182 CYLINDER BLOCK AS
S/N EHX1-UP
PART OF 237-0842 CYLINDER BLOCK GP
ALSO AN ATTACHMENT

i02043813 SEBP3655

For full view, you need register

Parts for your D10T TRACK-TYPE TRACTOR:

Pos.	Part No	Qty	Parts name
1.	230-7181 Y	[1]	CYLINDER BLOCK AS
2.	197-9322	[12]	LINER-CYLINDER BLOCK
3.	9L-5854	[12]	BAND-FILLER (130.2-MM ID)
4.	142-7072	[12]	SEAL-LINER
5.	110-2220	[12]	SEAL-LINER
6.	142-6217	[12]	SEAL-O-RING

	6I-4361 ABF		INSERT-LINER SEAT (0.772-MM THK)
	9Y-3368 ABF		INSERT-LINER SEAT (0.822-MM THK)
	6I-4362 ABF		INSERT-LINER SEAT (0.872-MM THK)
	6I-4363 ABF		INSERT-LINER SEAT (1.555-MM THK)
	2W-3815 ABF		INSERT-LINER SEAT (1.605-MM THK)
	6I-4364 ABF		INSERT-LINER SEAT (1.655-MM THK)
	6I-4365 ABF		INSERT-LINER SEAT (2.66-MM THK)
	5N-0093 ABF		INSERT-LINER SEAT (2.71-MM THK)
	6I-4366 ABF		INSERT-LINER SEAT (2.76-MM THK)
	101-0524 ABF		INSERT-LINER SEAT (5.16-MM THK)
	101-0523 ABF		INSERT-LINER SEAT (5.21-MM THK)
	101-0525 ABF		INSERT-LINER SEAT (5.26-MM THK)
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED
	F		NOT SHOWN
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP36550058

348-9904: CYLINDER BLOCK AS

348-9904 CYLINDER BLOCK AS
S/N EHX5006-UP
PART OF 348-9905 CYLINDER BLOCK AS
ALSO AN ATTACHMENT

i03745300 SEBP3655

For full view, you need register

Parts for your D10T TRACK-TYPE TRACTOR:

Pos.	Part No	Qty	Parts name
1.	3P-1323	[14]	BOLT-BEARING CAP (7/8-14X7.75-IN)
2.	225-5966	[1]	SLEEVE
3.	232-7607	[7]	CAP-CRANKSHAFT
4.	365-4307	[14]	BOLT-12 POINT HEAD (M11X1.25X50-MM)
5.	341-0087	[2]	PLUG AS
			(EACH INCLUDES)
	6V-6609	[1]	SEAL-O-RING
	9S-4185	[1]	PLUG (3/4-16-THD)
6.	4N-0685	[1]	BUSHING (1-IN WIDE)
7.	4N-6658	[1]	BUSHING (1.3-IN WIDE)
9.	9H-1031	[14]	WASHER-HARD (24X41.5X6-MM THK)

#SEBP36550059

348-9905: CYLINDER BLOCK AS

348-9905 CYLINDER BLOCK AS
S/N EHX5006-UP
PART OF 349-2528 CYLINDER BLOCK GP
ALSO AN ATTACHMENT

i03745213 SEBP3655

For full view, you need register

Parts for your D10T TRACK-TYPE TRACTOR: