AIR INLET AND EXHAUST SYSTEM
AIR CLEANER GPAFTERCOOLER GP
TURBOCHARGER GP
AIR CLEANER GP
MANIFOLD GP-EXHAUST
AIR INLET AND EXHAUST SYSTEM
AIR CLEANER GP
#SEBP36550220
371-6826: AIR CLEANER GP
For full view, you need register
Parts for your D10T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1P-9390 | [2] | GASKET-OUTLET | |
| 2. | 5P-4869 | [3] | CLAMP-HOSE | |
| 3. | 231-8825 | [2] | CLAMP AS | |
| 4. | 231-8842 | [2] | PLATE | |
| 5. | 235-4177 Y | [2] | AIR CLEANER GP | |
| 6. | 268-6682 | [2] | ELBOW | |
| 7. | 6V-4248 M | [10] | BOLT (M10X1.5X25-MM) | |
| 8. | 6V-5839 | [10] | WASHER (11X21X2.5-MM THK) | |
| 9. | 6V-7744 M | [20] | LOCKNUT (M10X1.5-THD) | |
| 10. | 8T-4121 | [20] | WASHER-HARD (11X21X2.5-MM THK) | |
| 11. | 8T-7044 M | [20] | STUD-TAPERLOCK (M10X1.5X40-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP36550221
371-6828: AIR CLEANER GP
371-6828 AIR CLEANER GP -PRECLEANER
S/N RJG4000-UP
PART OF 371-6893 SPECIAL AR, 371-6888 SUPPRESSION AR-SOUND
AN ATTACHMENT
S/N RJG4000-UP
PART OF 371-6893 SPECIAL AR, 371-6888 SUPPRESSION AR-SOUND
AN ATTACHMENT
For full view, you need register
Parts for your D10T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5P-0597 | [2] | CLAMP-HOSE | |
| 2. | 7S-8817 | [2] | PRECLEANER AS | |
| (EACH INCLUDES) | ||||
| 0S-1591 | [1] | BOLT (3/8-16X1.5-IN) | ||
| 6V-8801 | [1] | NUT (3/8-16-THD) | ||
| 3. | 123-6857 | [1] | BODY AS-PRECLEANER (LH) | |
| 4. | 123-6858 | [1] | BODY AS-PRECLEANER (RH) | |
| 5. | 5M-3062 | [8] | BOLT (3/8-16X0.75-IN) | |
| 6. | 5P-1075 | [8] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 7. | 5P-4325 | [2] | CLIP (LOOP) | |
| 8. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 9. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 10. | 5P-1471 E | HOSE (98-CM EACH) | ||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP36550222
214-2297: BEARING & HOUSING GP
For full view, you need register
Parts for your D10T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6I-9103 | [2] | BEARING-OUTER | |
| 2. | 005-7310 | [2] | RACE | |
| -OR- | ||||
| 6H-3957 | [2] | BALL BEARING | ||
| 3. | 211-5337 | [1] | HOUSING | |
| 4. | 214-2296 | [1] | SHAFT | |
| 5. | 288-8638 B | [1] | SHIM (0.12-MM THK) | |
| 6. | 288-8639 B | [1] | SHIM (0.25-MM THK) | |
| 7. | 288-8640 B | [1] | SHIM (0.4-MM THK) | |
| 8. | 1K-6985 | [1] | RING-RETAINING | |
| 9. | 2D-6648 | [1] | RING-RETAINING | |
| 10. | 5P-9597 | [1] | SEAL-LIP TYPE | |
| B | USE AS REQUIRED | |||
#SEBP36550223
268-0183: CARTRIDGE GP-TURBOCHARGER
268-0183 CARTRIDGE GP-TURBOCHARGER
S/N EHX2382-UP
PART OF 234-1524, 268-3295 TURBOCHARGER GP
ALSO AN ATTACHMENT
S/N EHX2382-UP
PART OF 234-1524, 268-3295 TURBOCHARGER GP
ALSO AN ATTACHMENT
For full view, you need register
Parts for your D10T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4P-3818 M | [3] | BOLT (M4X0.7X10-MM) | |
| 2. | 206-8868 | [1] | SEAL-RING | |
| 3. | 211-2264 | [1] | RING-PISTON | |
| 4. | 239-5894 | [2] | BEARING-JOURNAL | |
| 5. | 268-2936 | [1] | BEARING-THRUST | |
| 6. | 358-2854 | [1] | COLLAR-THRUST | |
| 7. | 211-2259 | [2] | RING-PISTON | |
| 8. | 461-3792 | [3] | WASHER (WEAR) | |
| 9. | 461-3728 | [3] | RING-RETAINING | |
| 10. | 156-6964 M | [4] | BOLT (M8X1.25X30-MM) | |
| M | METRIC PART | |||
#SEBP36550224
212-7679: DUST EJECTOR GP
212-7679 DUST EJECTOR GP -ATAAC, RH
S/N RJG1-109
PART OF 212-2745 INSTALLATION AR-ENGINE
S/N RJG1-109
PART OF 212-2745 INSTALLATION AR-ENGINE
For full view, you need register
Parts for your D10T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5P-0597 | [2] | CLAMP-HOSE | |
| 2. | 7S-4411 | [1] | CAP AS-RAIN (EXHAUST) | |
| 3. | 5P-1471 E | HOSE (76-CM) | ||
| 4. | 219-9914 | [1] | EJECTOR AS | |
| 158-3528 | [1] | CLAMP-PIPE | ||
| 5. | 242-9536 | [1] | SHIELD AS-HEAT | |
| 6. | 130-3374 | [2] | CLIP | |
| 7. | 2N-2766 | [1] | LOCKNUT (3/8-16-THD) | |
| 8. | 2P-7418 | [1] | CLAMP | |
| 9. | 0S-1590 | [1] | BOLT (3/8-16X2-IN) | |
| 10. | 5M-2894 | [1] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 11. | 8T-4896 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 12. | 9B-7237 | [2] | BOLT (3/8-16X1.25-IN) | |
| E | ORDER BY THE CENTIMETER | |||
#SEBP36550225
212-7679: DUST EJECTOR GP
212-7679 DUST EJECTOR GP -ATAAC, RH
S/N RJG110-528
PART OF 212-2745 INSTALLATION AR-ENGINE
S/N RJG110-528
PART OF 212-2745 INSTALLATION AR-ENGINE
For full view, you need register
Parts for your D10T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5P-0597 | [2] | CLAMP-HOSE | |
| 2. | 7S-4411 | [1] | CAP AS-RAIN (EXHAUST) | |
| 3. | 210-9123 | HOSE | ||
| 4. | 219-9914 | [1] | EJECTOR AS | |
| 158-3528 | [1] | CLAMP-PIPE | ||
| 5. | 242-9536 | [1] | SHIELD AS-HEAT | |
| 6. | 130-3374 | [2] | CLIP | |
| 7. | 2N-2766 | [1] | LOCKNUT (3/8-16-THD) | |
| 8. | 2P-7418 | [1] | CLAMP | |
| 9. | 0S-1590 | [1] | BOLT (3/8-16X2-IN) | |
| 10. | 5M-2894 | [1] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 11. | 8T-4121 C | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 12. | 8T-4195 CM | [2] | BOLT (M10X1.5X30-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP36550226
212-7684: DUST EJECTOR GP
212-7684 DUST EJECTOR GP -ATAAC, LH
S/N RJG1-528
PART OF 212-2745 INSTALLATION AR-ENGINE
S/N RJG1-528
PART OF 212-2745 INSTALLATION AR-ENGINE
For full view, you need register
Parts for your D10T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1W-8620 | [1] | VALVE AS-CHECK | |
| 2. | 5P-0597 | [8] | CLAMP-HOSE | |
| 3. | 7S-4411 | [1] | CAP AS-RAIN (EXHAUST) | |
| 4. | 180-2449 | [1] | ELBOW | |
| 5. | 180-5571 | [1] | BRACKET | |
| 6. | 5P-1471 E | HOSE (62-CM EACH) | ||
| 6A. | 5P-1471 E | HOSE (30.5-CM) | ||
| 8. | 210-9126 | [1] | HOSE | |
| 9. | 219-9914 | [1] | EJECTOR AS | |
| 158-3528 | [1] | CLAMP-PIPE | ||
| 10. | 242-9536 | [1] | SHIELD AS-HEAT | |
| 11. | 2N-2766 | [1] | LOCKNUT (3/8-16-THD) | |
| 12. | 2P-7418 | [1] | CLAMP | |
| 13. | 8T-4195 M | [3] | BOLT (M10X1.5X30-MM) | |
| 14. | 4P-7581 | [1] | CLIP (LADDER) | |
| 15. | 4P-8134 | [1] | CLIP (LADDER) | |
| 16. | 0S-1590 | [1] | BOLT (3/8-16X2-IN) | |
| 17. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 18. | 7K-1181 | [2] | STRAP-CABLE | |
| 19. | 5M-2894 | [1] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 20. | 8T-4896 | [3] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 21. | 9B-7237 | [3] | BOLT (3/8-16X1.25-IN) | |
| 22. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP36550227
269-0889: DUST EJECTOR GP
For full view, you need register
Parts for your D10T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5P-0597 | [4] | CLAMP-HOSE | |
| 2. | 7S-5003 | [2] | CAP AS-RAIN (EXHAUST) | |
| 3. | 269-0892 | [2] | EJECTOR AS | |
| 4. | 5P-1076 | [8] | WASHER-HARD (13.5X30X4-MM THK) | |
| 5. | 5P-4325 | [4] | CLIP (LOOP) | |
| 6. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 7. | 8T-4136 M | [4] | BOLT (M10X1.5X25-MM) | |
| 8. | 8T-4183 M | [8] | BOLT (M12X1.75X40-MM) | |
| 9. | 5P-1471 E | HOSE (98-CM EACH) | ||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP36550228
371-6827: DUST EJECTOR GP
For full view, you need register
Parts for your D10T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5P-0597 | [2] | CLAMP-HOSE | |
| 2. | 7S-5003 | [2] | CAP AS-RAIN (EXHAUST) | |
| 3. | 269-0892 | [2] | EJECTOR AS | |
| 4. | 5P-1076 | [8] | WASHER-HARD (13.5X30X4-MM THK) | |
| 5. | 5P-4325 | [2] | CLIP (LOOP) | |
| 6. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 7. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 8. | 8T-4183 M | [8] | BOLT (M12X1.75X40-MM) | |
| M | METRIC PART | |||
#SEBP36550229
249-8533: FASTENER GP-MANIFOLD SHIELD
249-8533 FASTENER GP-MANIFOLD SHIELD
S/N EHX1-UP
PART OF 212-2737, 212-2744, 271-2219, 271-2220, 360-3754 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
S/N EHX1-UP
PART OF 212-2737, 212-2744, 271-2219, 271-2220, 360-3754 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
For full view, you need register
