ELECTRICAL AND STARTING SYSTEM
WIRING GPELECTRICAL AND STARTING SYSTEM
WIRING GP
#SEBP36550560
473-5218: WIRING GP-CAMERA
473-5218 WIRING GP-CAMERA
S/N RJG1-UP
FIELD REPLACEMENT ORDER @@@@@549-4437@@@@@
FIELD INSTALLATION
S/N RJG1-UP
FIELD REPLACEMENT ORDER @@@@@549-4437@@@@@
FIELD INSTALLATION
For full view, you need register
Parts for your D10T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9W-4361 | [6] | MOUNT-FLEXIBLE | |
| 2. | 9X-9896 | [8] | MOUNT (ISOLATION) | |
| 3. | 285-5231 | [8] | U-BOLT | |
| 4. | 362-0169 | [1] | CONTROL GP-UNPROGRAMMED (ETHERNET SWITCH) | |
| 5. | 364-8168 | [1] | BRACKET | |
| 6. | 456-7139 | [1] | CONTROL GP-ELECTRONIC | |
| 7. | 456-8335 | [3] | CONTROL GP-ELECTRONIC | |
| 8. | 469-9187 | [1] | MICROPHONE | |
| 9. | 473-5210 | [4] | BRACKET | |
| 10. | 473-5211 | [4] | BRACKET AS | |
| 11. | 473-5212 | [4] | BRACKET AS | |
| 12. | 488-4031 | [1] | PLATE AS | |
| 13. | 488-4032 | [1] | BRACKET | |
| 14. | 494-0528 | [1] | BRACKET AS | |
| 15. | 494-0529 | [1] | BRACKET AS | |
| 16. | 498-0292 | [1] | BRACKET AS | |
| 17. | 498-0760 Y | [1] | HARNESS AS-WIRING (CAMERA) | |
| 18. | 498-8355 | [1] | PLATE | |
| 19. | 498-8356 | [1] | PLATE AS | |
| 20. | 179-4633 | [1] | SPACER (22X40X34-MM THK) | |
| 21. | 197-3285 | [1] | SPACER (24.5X44X40-MM THK) | |
| 22. | 1K-4649 | [4] | SPACER (0.516X1X1-IN THK) | |
| 23. | 230-7732 | [4] | MOUNTING-CABLE TIE | |
| 24. | 344-5673 M | [4] | NUT (M6X1-THD) | |
| 25. | 4L-6459 | [4] | BOLT (3/8-16X2.5-IN) | |
| 26. | 4P-8134 | [1] | CLIP (LADDER) | |
| 27. | 5P-1075 | [20] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 28. | 5P-1076 | [7] | WASHER-HARD (13.5X30X4-MM THK) | |
| 29. | 5P-4116 | [32] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 30. | 6V-8801 | [16] | NUT (3/8-16-THD) | |
| 31. | 7K-1181 | [27] | STRAP-CABLE | |
| 32. | 7T-1099 | [5] | LINK | |
| 33. | 7X-0369 | [2] | BOLT (3/4-10X3.25-IN) | |
| 34. | 7X-2533 M | [4] | BOLT (M6X1X35-MM) | |
| 35. | 7X-2534 M | [4] | BOLT (M6X1X50-MM) | |
| 36. | 8C-5608 | [4] | SPACER (6.5X9.5X25.4-MM THK) | |
| 37. | 8T-4121 | [7] | WASHER-HARD (11X21X2.5-MM THK) | |
| 38. | 8T-4136 M | [4] | BOLT (M10X1.5X25-MM) | |
| 39. | 8T-4183 M | [2] | BOLT (M12X1.75X40-MM) | |
| 40. | 8T-4184 M | [1] | BOLT (M12X1.75X45-MM) | |
| 41. | 8T-4189 M | [40] | BOLT (M8X1.25X20-MM) | |
| 42. | 8T-4195 M | [3] | BOLT (M10X1.5X30-MM) | |
| 43. | 8T-4223 | [16] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 44. | 8T-4224 | [8] | WASHER-HARD (8.8X16X2-MM THK) | |
| 45. | 8T-4910 M | [4] | BOLT (M12X1.75X60-MM) | |
| 46. | 8T-4994 | [2] | WASHER-HARD (20X36.5X3.5-MM THK) | |
| 47. | 8X-8379 | [2] | BLOCK | |
| 48. | 9X-6165 | [8] | WASHER (6.5X22X2.5-MM THK) | |
| 49. | 9X-8256 | [4] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP36550561
457-7943: WIRING GP-CHASSIS
For full view, you need register
Parts for your D10T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-9655 | [8] | MOUNT-ISOLATION | |
| 2. | 424-4915 | [1] | SWITCH AS-ROCKER (24-VOLT)(MANUAL, REMOTE CONTROL) | |
| 3. | 362-3609 Y | [1] | HARNESS AS-SWITCH (MANUAL, REMOTE CONTROL) | |
| 4. | 455-9583 | [1] | CONTROL GP-UNPROGRAMMED | |
| 5. | 460-3836 Y | [1] | SENSOR & MTG GP-GRADE | |
| 6. | 462-7201 B | [4] | BOSS-WELD | |
| 7. | 485-9470 | [1] | PLATE AS | |
| 8. | Y | [1] | HARNESS AS-CHASSIS | |
| 9. | Y | [1] | HARNESS AS-CHASSIS | |
| 10. | 130-5300 | [2] | CLIP | |
| 11. | 204-8000 | [1] | MOUNTING-CABLE TIE | |
| 12. | 4P-7581 | [2] | CLIP (LADDER) | |
| 13. | 6I-1418 | [4] | SPACER (8.2X12.7X28.7-MM THK) | |
| 14. | 7K-1181 | [24] | STRAP-CABLE | |
| 15. | 7T-1099 | [3] | LINK | |
| 16. | 7X-7729 | [9] | WASHER (11X25X3-MM THK) | |
| 17. | 7X-7964 BM | [4] | BOSS-WELD | |
| 18. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 19. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 20. | 8T-4138 M | [4] | BOLT (M6X1X20-MM) | |
| 21. | 8T-4185 M | [3] | BOLT (M10X1.5X50-MM) | |
| 22. | 8T-4191 M | [4] | BOLT (M10X1.5X16-MM) | |
| 23. | 8T-5387 | [1] | GROMMET | |
| 24. | 8T-6466 M | [1] | BOLT (M10X1.5X60-MM) | |
| 25. | 8T-6912 M | [4] | BOLT (M8X1.25X50-MM) | |
| 26. | 9N-0869 | [4] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 27. | 9X-8256 | [4] | WASHER (6.6X12X2-MM THK) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP36550562
438-4319: WIRING GP-COMMUNICATION
438-4319 WIRING GP-COMMUNICATION
S/N RJG1-UP
ETHERNET COMMUNICATION GROUP
FIELD INSTALLATION
S/N RJG1-UP
ETHERNET COMMUNICATION GROUP
FIELD INSTALLATION
For full view, you need register
Parts for your D10T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 510-8163 C | [2] | PLATE | |
| 2. | 8C-5607 | [8] | MOUNT-ISOLATION | |
| 3. | 450-6696 | [1] | CABLE AS | |
| 4. | 450-6697 | [1] | CABLE AS | |
| 5. | 456-3452 | [2] | CABLE AS | |
| 6. | 456-5024 Y | [1] | HARNESS AS-CONSOLE | |
| -OR- | ||||
| 493-9675 Y | [1] | HARNESS AS-CONSOLE | ||
| 7. | 459-0787 Y | [1] | CONTROL GP-COMMUNICATION (NETWORK MANAGER) | |
| 9. | 505-9940 C | [2] | PLATE AS | |
| 10. | 505-9941 C | [2] | PLATE | |
| 11. | 510-8164 C | [2] | PLATE | |
| 12. | 515-0650 | [1] | PLATE AS | |
| 14. | 114-6658 | [8] | WASHER (6.5X17X1-MM THK) | |
| 15. | 156-6175 | [2] | CLIP (LADDER) | |
| 16. | 277-8628 | [8] | MOUNT | |
| 17. | 329-3356 CM | [4] | NUT (M12X1.75-THD) | |
| 18. | 344-5675 CM | [10] | NUT (M10X1.5-THD) | |
| 19. | 353-7956 | [4] | GROMMET | |
| 20. | 353-7957 C | [13] | GROMMET | |
| 21. | 4P-7581 C | [8] | CLIP (LADDER) | |
| 22. | 5C-9553 CM | [8] | BOLT (M6X1X16-MM) | |
| 23. | 5M-2894 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 24. | 5P-7464 C | [4] | CLIP (SLOT) | |
| 25. | 5P-7465 C | [4] | CLIP (TAB) | |
| 26. | 6V-7359 C | [4] | GROMMET (25-MM ID, 37-MM OD) | |
| 27. | 7K-1181 C | [18] | STRAP-CABLE | |
| 28. | 7Y-6338 M | [4] | BOSS (M10X1.5X70-MM) | |
| 29. | 8C-5608 | [4] | SPACER (6.5X9.5X25.4-MM THK) | |
| 30. | 8C-8451 M | [4] | BOLT (M6X1X40-MM) | |
| 31. | C | [2] | BAR | |
| 32. | 8T-0269 CM | [6] | BOLT-SOCKET HEAD (M6X1X20-MM) | |
| 33. | 8T-1887 C | [2] | CLIP (SLOT) | |
| 34. | 8T-1888 C | [2] | CLIP (TAB) | |
| 35. | 8T-2502 C | [12] | BOLT (3/8-16X1.125-IN) | |
| 36. | 8T-4121 C | [22] | WASHER-HARD (11X21X2.5-MM THK) | |
| 37. | 8T-4136 CM | [2] | BOLT (M10X1.5X25-MM) | |
| 38. | 8T-4137 CM | [8] | BOLT (M10X1.5X20-MM) | |
| 39. | 8T-4192 CM | [4] | BOLT (M12X1.75X25-MM) | |
| 40. | 8T-4223 C | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 41. | 9L-8781 | [8] | WASHER (0.406X1.5X0.188-IN THK) | |
| 42. | 9X-6485 M | [4] | STUD (M10X1.5X65-MM) | |
| 43. | 9X-8256 C | [14] | WASHER (6.6X12X2-MM THK) | |
| CFY | [1] | ELECTRONICS GP-MONITOR | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| F | NOT SHOWN | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP36550563
248-6886: WIRING GP-ELECTRONIC CONTROL
248-6886 WIRING GP-ELECTRONIC CONTROL
S/N EHX1-UP
PART OF 212-2737, 212-2744, 271-2219, 271-2220 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
S/N EHX1-UP
PART OF 212-2737, 212-2744, 271-2219, 271-2220 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
For full view, you need register
Parts for your D10T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [15] | STRAP-CABLE (PLASTIC) | |
| 2. | 267-4524 | [1] | HARNESS AS-SENSOR (ELECTRONIC CONTROL MODULE) | |
| 211-6807 | [1] | COVER-CONNECTOR | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(15-CM) | |||
| 125-7876 E | TUBE-HEAT SHRINK (17.78-MM DIA)(50-CM) | |||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 102-8803 | [3] | KIT-RECEPTACLE (3-PIN) | ||
| (EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 155-2255 | [2] | KIT-CONNECTING PLUG (12-PIN) | ||
| (EACH INCLUDES PLUG AS, INTERFACE SEAL, & WEDGE) | ||||
| 102-8806 | [1] | KIT-RECEPTACLE (8-PIN) | ||
| (INCLUDES PLUG AS & WEDGE) | ||||
| 155-2270 | [5] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS, INTERFACE SEAL, & WEDGE) | ||||
| 227-4002 | [1] | PLUG AS-CONNECTOR (108-PIN) | ||
| 3. | 067-2551 | [1] | CLIP | |
| 4. | 0S-0509 | [1] | BOLT (3/8-16X0.75-IN) | |
| 5. | 132-5789 | [2] | CLIP (LADDER) | |
| 6. | 4D-8123 | [1] | CLIP (LOOP) | |
| 7. | 4K-8864 | [1] | CLIP (LOOP) | |
| 8. | 4P-7429 | [1] | CLIP (LADDER) | |
| 9. | 4P-7581 | [1] | CLIP (LADDER) | |
| 10. | 4P-8134 | [1] | CLIP (LADDER) | |
| 11. | 5M-2894 | [1] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 12. | 5P-9085 | [2] | CLIP (LOOP) | |
| 13. | 6D-3479 | [4] | CLIP (LOOP) | |
| 14. | 6V-3265 | [1] | CLIP | |
| E | ORDER BY THE CENTIMETER | |||
#SEBP36550564
248-6886: WIRING GP-ELECTRONIC CONTROL
248-6886 WIRING GP-ELECTRONIC CONTROL
S/N EHX2581-UP
PART OF 212-2737, 271-2219, 271-2220, 360-3754 ENGINE AR-COMPLETE
Type 1
ALSO AN ATTACHMENT
S/N EHX2581-UP
PART OF 212-2737, 271-2219, 271-2220, 360-3754 ENGINE AR-COMPLETE
Type 1
ALSO AN ATTACHMENT
For full view, you need register
Parts for your D10T TRACK-TYPE TRACTOR:
CATERPILLAR SIS#SEBP36550565
248-6886: WIRING GP-ELECTRONIC CONTROL
248-6886 WIRING GP-ELECTRONIC CONTROL
S/N EHX2581-UP
PART OF 212-2737, 271-2219, 271-2220, 360-3754 ENGINE AR-COMPLETE
Type 2
ALSO AN ATTACHMENT
S/N EHX2581-UP
PART OF 212-2737, 271-2219, 271-2220, 360-3754 ENGINE AR-COMPLETE
Type 2
ALSO AN ATTACHMENT
For full view, you need register
Parts for your D10T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [19] | STRAP-CABLE | |
| 2. | 7K-1181 | [5] | STRAP-CABLE | |
| 3. | 296-7520 Y | [1] | HARNESS AS-SENSOR (OIL LEVEL) | |
| 4. | 132-5789 | [6] | CLIP (LADDER) | |
| 5. | 4P-7581 | [3] | CLIP (LADDER) | |
| 6. | 4P-8134 | [4] | CLIP (LADDER) | |
| 7. | 5P-9085 C | [1] | CLIP (LOOP) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP36550566
213-7004: WIRING GP-ENGINE
For full view, you need register
Parts for your D10T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7N-1277 | [2] | BRACKET AS | |
| (EACH INCLUDES) | ||||
| 1F-0750 | [1] | NUT-WELD (3/8-16-THD) | ||
| 2. | 9G-7101 | [9] | SPACER (11X20X30-MM THK) | |
| 3. | 9M-4136 | [2] | SPACER (0.438X0.75X0.5-IN THK) | |
| 4. | 9X-0263 | [1] | ADAPTER | |
| 5. | 145-7028 Y | [1] | SENSOR GP-TEMPERATURE (TORQUE CONVERTER OIL) | |
| 6. | 189-5746 Y | [1] | SENSOR GP-SPEED (TORQUE CONVERTER) | |
| 7. | 204-8000 | [6] | MOUNTING-CABLE TIE | |
| 8. | 205-3079 | [1] | ADAPTER | |
| 9. | 208-4622 | [1] | STRAP AS | |
| 10. | 213-7006 | [1] | HARNESS AS-ENGINE | |
| 110-8769 | [1] | WIRE AS (16-GA) | ||
| 126-1774 | [1] | COVER-CONNECTOR | ||
| 102-8802 | [2] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8803 | [2] | KIT-RECEPTACLE (3-PIN) | ||
| (EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 134-2540 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2257 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [7] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| 174-0503 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 160-7689 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 121-2844 | [1] | HARNESS AS-WIRING (CRANK WITHOUT INJECT) | ||
| 209-6630 | [1] | TAG-INFORMATION | ||
| 102-8803 | [2] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 11. | 213-7009 | [1] | CABLE AS (ALTERNATOR) | |
| 1S-4915 | [4] | LINER (CONDUIT) | ||
| 1S-7251 | [1] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | ||
| 5P-0695 E | CONDUIT (345-CM) | |||
| 5P-0760 E | CABLE (0-GA, RED)(380-CM) | |||
| 8N-0869 | [2] | COVER-TERMINAL (RED) | ||
| 8T-2225 E | TUBE-HEAT SHRINK (25.4-MM DIA)(32-CM) | |||
| 114-8843 E | SLEEVE-PLASTIC (40-CM) | |||
| 170-3794 | [1] | RING-TERMINAL | ||
| 12. | 239-2240 | [1] | BRACKET AS | |
| 13. | 0L-1143 | [4] | BOLT (3/8-16X2.5-IN) | |
| 14. | 0S-1590 | [2] | BOLT (3/8-16X2-IN) | |
| 15. | 104-6202 | [2] | CLIP (LADDER) | |
| 16. | 132-5789 | [3] | CLIP (LADDER) | |
| 17. | 161-9926 Y | [1] | SENSOR GP-PRESSURE (TURBO INLET) | |
| 18. | 193-3973 | [6] | STRAP-CABLE | |
| 19. | 1S-0994 | [5] | CLIP (LOOP) | |
| 20. | 237-0957 Y | [1] | SENSOR GP-PRESSURE (FAN PUMP) | |
| 21. | 3E-4353 | [2] | WASHER-HARD (11X25X3-MM THK) | |
| 22. | 3J-1907 | [1] | SEAL-O-RING | |
| 23. | 3J-7354 | [1] | SEAL-O-RING | |
| 24. | 4L-6454 | [3] | BOLT (3/8-16X1-IN) | |
| 25. | 4L-6459 | [1] | BOLT (3/8-16X2.5-IN) | |
| 26. | 4P-7428 | [3] | CLIP (LADDER) | |
| 27. | 4P-7429 | [10] | CLIP (LADDER) | |
| 28. | 4P-7581 | [2] | CLIP (LADDER) | |
| 29. | 4P-7582 | [1] | CLIP (LADDER) | |
| 30. | 4P-8134 | [11] | CLIP (LADDER) | |
| 31. | 5C-6266 | [2] | BOLT (5/8-11X1-IN) | |
| 32. | 5P-2228 | [2] | BOLT (1/2-13X1-IN) | |
| 33. | 6V-5839 | [7] | WASHER (11X21X2.5-MM THK) | |
| 34. | 6V-6317 M | [2] | BOLT (M10X1.5X20-MM) | |
| 35. | 6V-7357 M | [4] | BOLT (M6X1X25-MM) | |
| 36. | 6V-8801 | [1] | NUT (3/8-16-THD) | |
| 37. | 6V-9028 | [1] | SEAL-O-RING | |
| 38. | 7J-0204 | [1] | SEAL-O-RING | |
| 39. | 7K-1181 | [44] | STRAP-CABLE | |
| 40. | 8T-4121 | [20] | WASHER-HARD (11X21X2.5-MM THK) | |
| 41. | 8T-4122 | [2] | WASHER-HARD (17X32X3.5-MM THK) | |
| 42. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 43. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 44. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 45. | 8T-4185 M | [1] | BOLT (M10X1.5X50-MM) | |
| 46. | 8T-4195 M | [4] | BOLT (M10X1.5X30-MM) | |
| 47. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 48. | 8T-6466 M | [1] | BOLT (M10X1.5X60-MM) | |
| 49. | 9B-7237 | [1] | BOLT (3/8-16X1.25-IN) | |
| 50. | 9X-8256 | [4] | WASHER (6.6X12X2-MM THK) | |
| 51. | 269-5324 | [1] | PLATE AS | |
| 52. | 4T-8050 | [1] | SPACER (11X19X57-MM THK) | |
| 53. | 0T-0065 | [1] | BOLT (3/8-16X3.5-IN) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP36550567
213-7004: WIRING GP-ENGINE
For full view, you need register
Parts for your D10T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4T-8050 | [1] | SPACER (11X19X57-MM THK) | |
| 2. | 7N-1277 | [2] | BRACKET AS | |
| (EACH INCLUDES) | ||||
| 1F-0750 | [1] | NUT-WELD (3/8-16-THD) | ||
| 3. | 9G-7101 | [9] | SPACER (11X20X30-MM THK) | |
| 4. | 9M-4136 | [2] | SPACER (0.438X0.75X0.5-IN THK) | |
| 5. | 9X-0263 | [1] | ADAPTER | |
| 6. | 145-7028 Y | [1] | SENSOR GP-TEMPERATURE (TORQUE CONVERTER OIL) | |
| 7. | 189-5746 Y | [1] | SENSOR GP-SPEED (TORQUE CONVERTER) | |
| 8. | 204-8000 C | [7] | MOUNTING-CABLE TIE | |
| 9. | 205-3079 | [1] | ADAPTER | |
| 10. | 208-4622 | [1] | STRAP AS | |
| 11. | 213-7006 | [1] | HARNESS AS-ENGINE | |
| 110-8769 | [1] | WIRE AS (16-GA) | ||
| 126-1774 | [1] | COVER-CONNECTOR | ||
| 102-8802 | [2] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8803 | [2] | KIT-RECEPTACLE (3-PIN) | ||
| (EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 134-2540 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2257 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [7] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| 174-0503 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 160-7689 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 121-2844 | [1] | HARNESS AS-WIRING (CRANK WITHOUT INJECT) | ||
| 209-6630 | [1] | TAG-INFORMATION | ||
| 102-8803 | [2] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 12. | 213-7009 | [1] | CABLE AS (ALTERNATOR) | |
| 1S-4915 | [4] | LINER (CONDUIT) | ||
| 1S-7251 | [1] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | ||
| 5P-0695 E | CONDUIT (345-CM) | |||
| 5P-0760 E | CABLE (0-GA, RED)(380-CM) | |||
| 8N-0869 | [2] | COVER-TERMINAL (RED) | ||
| 8T-2225 E | TUBE-HEAT SHRINK (25.4-MM DIA)(32-CM) | |||
| 114-8843 E | SLEEVE-PLASTIC (40-CM) | |||
| 170-3794 | [1] | RING-TERMINAL | ||
| 13. | 239-2240 | [1] | BRACKET AS | |
| 14. | 269-5324 | [1] | PLATE AS | |
| 15. | 0L-1143 | [4] | BOLT (3/8-16X2.5-IN) | |
| 16. | 0S-1590 | [2] | BOLT (3/8-16X2-IN) | |
| 17. | 0T-0065 | [1] | BOLT (3/8-16X3.5-IN) | |
| 18. | 104-6202 | [2] | CLIP (LADDER) | |
| 19. | 132-5789 | [3] | CLIP (LADDER) | |
| 20. | 161-9926 Y | [1] | SENSOR GP-PRESSURE (TURBO INLET) | |
| 21. | 193-3973 C | [7] | STRAP-CABLE | |
| 22. | 1S-0994 | [5] | CLIP (LOOP) | |
| 23. | 237-0957 Y | [1] | SENSOR GP-PRESSURE (FAN PUMP) | |
| 24. | 3E-4353 | [2] | WASHER-HARD (11X25X3-MM THK) | |
| 25. | 3J-1907 | [1] | SEAL-O-RING | |
| 26. | 3J-7354 | [1] | SEAL-O-RING | |
| 27. | 4L-6454 | [3] | BOLT (3/8-16X1-IN) | |
| 28. | 4L-6459 | [1] | BOLT (3/8-16X2.5-IN) | |
| 29. | 4P-7428 | [3] | CLIP (LADDER) | |
| 30. | 4P-7429 | [11] | CLIP (LADDER) | |
| 31. | 4P-7581 | [2] | CLIP (LADDER) | |
| 32. | 4P-7582 | [1] | CLIP (LADDER) | |
| 33. | 4P-8134 C | [10] | CLIP (LADDER) | |
| 34. | 5C-6266 | [2] | BOLT (5/8-11X1-IN) | |
| 35. | 5P-2228 | [2] | BOLT (1/2-13X1-IN) | |
| 36. | 6V-5839 | [7] | WASHER (11X21X2.5-MM THK) | |
| 37. | 6V-6317 M | [2] | BOLT (M10X1.5X20-MM) | |
| 38. | 6V-7357 M | [4] | BOLT (M6X1X25-MM) | |
| 39. | 6V-8801 | [1] | NUT (3/8-16-THD) | |
| 40. | 6V-9028 | [1] | SEAL-O-RING | |
| 41. | 7J-0204 | [1] | SEAL-O-RING | |
| 42. | 7K-1181 | [44] | STRAP-CABLE | |
| 43. | 8T-4121 | [20] | WASHER-HARD (11X21X2.5-MM THK) | |
| 44. | 8T-4122 | [2] | WASHER-HARD (17X32X3.5-MM THK) | |
| 45. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 46. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 47. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 48. | 8T-4186 CM | [1] | BOLT (M10X1.5X40-MM) | |
| 49. | 8T-4195 M | [4] | BOLT (M10X1.5X30-MM) | |
| 50. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 51. | 8T-6466 M | [1] | BOLT (M10X1.5X60-MM) | |
| 52. | 9B-7237 | [1] | BOLT (3/8-16X1.25-IN) | |
| 53. | 9X-8256 | [4] | WASHER (6.6X12X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP36550568
213-7004: WIRING GP-ENGINE
213-7004 WIRING GP-ENGINE
S/N RJG529-1135
PART OF 267-2900 INSTALLATION AR-ENGINE
Type 1
S/N RJG529-1135
PART OF 267-2900 INSTALLATION AR-ENGINE
Type 1
For full view, you need register
Parts for your D10T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6B-6205 | [1] | SPACER (0.438X0.875X1.281-IN THK) | |
| 2. | 7N-1277 | [2] | BRACKET AS | |
| (EACH INCLUDES) | ||||
| 1F-0750 | [1] | NUT-WELD (3/8-16-THD) | ||
| 3. | 9G-7101 | [8] | SPACER (11X20X30-MM THK) | |
| 4. | 9M-4136 | [2] | SPACER (0.438X0.75X0.5-IN THK) | |
| 5. | 9X-0263 | [1] | ADAPTER | |
| 6. | 145-7028 Y | [1] | SENSOR GP-TEMPERATURE (TORQUE CONVERTER OIL) | |
| 7. | 189-5746 Y | [1] | SENSOR GP-SPEED (TORQUE CONVERTER) | |
| 8. | 204-8000 | [11] | MOUNTING-CABLE TIE | |
| 9. | 205-3079 | [1] | ADAPTER | |
| 10. | 208-4622 | [1] | STRAP AS (GROUND) | |
| 11. | 213-7009 | [1] | CABLE AS (ALTERNATOR) | |
| 1S-4915 | [4] | LINER (CONDUIT) | ||
| 1S-7251 | [1] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | ||
| 5P-0695 E | CONDUIT (345-CM) | |||
| 5P-0760 E | CABLE (0-GA, RED)(380-CM) | |||
| 8N-0869 | [2] | COVER-TERMINAL (RED) | ||
| 8T-2225 E | TUBE-HEAT SHRINK (25.4-MM DIA)(32-CM) | |||
| 114-8843 E | SLEEVE-PLASTIC (40-CM) | |||
| 170-3794 | [1] | RING-TERMINAL | ||
| 12. | 239-2240 | [1] | BRACKET AS | |
| 13. | 269-5324 | [1] | PLATE AS | |
| 14. | 275-6230 | [1] | HARNESS AS-ENGINE | |
| 110-8769 | [1] | WIRE AS (16-GA) | ||
| 126-1774 | [1] | COVER-CONNECTOR | ||
| 102-8802 | [2] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8803 | [2] | KIT-RECEPTACLE (3-PIN) | ||
| (EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 134-2540 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 214-4208 | [1] | RECEPTACLE AS-CONNECTOR (70-PIN) | ||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2257 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [7] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| 174-0503 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 160-7689 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 121-2844 | [1] | HARNESS AS-WIRING (CRANK WITHOUT INJECT) | ||
| 209-6630 | [1] | TAG-INFORMATION | ||
| 102-8803 | [2] | KIT-RECEPTACLE (3-PIN) | ||
| (EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 15. | 0L-1143 | [4] | BOLT (3/8-16X2.5-IN) | |
| 16. | 0S-1590 | [1] | BOLT (3/8-16X2-IN) | |
| 17. | 104-6202 | [2] | CLIP (LADDER) | |
| 18. | 132-5789 | [1] | CLIP (LADDER) | |
| 19. | 161-9926 Y | [1] | SENSOR GP-PRESSURE (TURBOCHARGER INLET) | |
| 20. | 193-3973 C | [15] | STRAP-CABLE | |
| 21. | 1S-0994 | [2] | CLIP (LOOP) | |
| 22. | 237-0957 Y | [1] | SENSOR GP-PRESSURE (FAN PUMP) | |
| 23. | 3E-4353 | [2] | WASHER-HARD (11X25X3-MM THK) | |
| 24. | 3J-1907 | [1] | SEAL-O-RING | |
| 25. | 3J-7354 | [1] | SEAL-O-RING | |
| 26. | 4L-6459 | [1] | BOLT (3/8-16X2.5-IN) | |
| 27. | 4P-7428 | [3] | CLIP (LADDER) | |
| 28. | 4P-7429 | [11] | CLIP (LADDER) | |
| 29. | 4P-7581 | [5] | CLIP (LADDER) | |
| 30. | 4P-7582 | [1] | CLIP (LADDER) | |
| 31. | 4P-8134 C | [8] | CLIP (LADDER) | |
| 32. | 5C-6266 | [2] | BOLT (5/8-11X1-IN) | |
| 33. | 5P-2228 | [2] | BOLT (1/2-13X1-IN) | |
| 34. | 6B-1557 | [1] | BOLT (3/8-16X7.5-IN) | |
| 35. | 6V-5839 | [6] | WASHER (11X21X2.5-MM THK) | |
| 36. | 6V-6317 M | [2] | BOLT (M10X1.5X20-MM) | |
| 37. | 6V-7357 M | [4] | BOLT (M6X1X25-MM) | |
| 38. | 6V-8801 | [1] | NUT (3/8-16-THD) | |
| 39. | 6V-9028 | [1] | SEAL-O-RING | |
| 40. | 7J-0204 | [1] | SEAL-O-RING | |
| 41. | 7K-1181 C | [43] | STRAP-CABLE | |
| 42. | 8T-4121 | [18] | WASHER-HARD (11X21X2.5-MM THK) | |
| 43. | 8T-4122 | [2] | WASHER-HARD (17X32X3.5-MM THK) | |
| 44. | 8T-4133 M | [2] | NUT (M10X1.5-THD) | |
| 45. | 8T-4136 M | [3] | BOLT (M10X1.5X25-MM) | |
| 46. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 47. | 8T-4186 M | [3] | BOLT (M10X1.5X40-MM) | |
| 48. | 8T-4195 M | [2] | BOLT (M10X1.5X30-MM) | |
| 49. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 50. | 8T-6466 M | [1] | BOLT (M10X1.5X60-MM) | |
| 51. | 9B-7237 | [1] | BOLT (3/8-16X1.25-IN) | |
| 52. | 9X-6458 | [1] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 53. | 9X-8256 | [4] | WASHER (6.6X12X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP36550569
213-7004: WIRING GP-ENGINE
213-7004 WIRING GP-ENGINE
S/N RJG529-1135
PART OF 267-2900 INSTALLATION AR-ENGINE
Type 2
S/N RJG529-1135
PART OF 267-2900 INSTALLATION AR-ENGINE
Type 2
For full view, you need register
Parts for your D10T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 C | [1] | STRAP-CABLE | |
| 2. | 6B-6205 | [1] | SPACER (0.438X0.875X1.281-IN THK) | |
| 3. | 7N-1277 C | [1] | BRACKET AS | |
| 1F-0750 | [1] | NUT-WELD (3/8-16-THD) | ||
| 4. | 9G-7101 C | [6] | SPACER (11X20X30-MM THK) | |
| 5. | 9M-4136 | [2] | SPACER (0.438X0.75X0.5-IN THK) | |
| 6. | 9X-0263 | [1] | ADAPTER | |
| 7. | 145-7028 Y | [1] | SENSOR GP-TEMPERATURE (TORQUE CONVERTER OIL) | |
| 8. | 189-5746 Y | [1] | SENSOR GP-SPEED (TORQUE CONVERTER) | |
| 9. | 193-3973 C | [10] | STRAP-CABLE | |
| 10. | 204-8000 C | [10] | MOUNTING-CABLE TIE | |
| 11. | 205-3079 | [1] | ADAPTER | |
| 12. | 208-4622 | [1] | STRAP AS (GROUND) | |
| 13. | 213-7009 | [1] | CABLE AS (ALTERNATOR) | |
| 1S-4915 | [4] | LINER (CONDUIT) | ||
| 1S-7251 | [1] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | ||
| 8N-0869 | [2] | COVER-TERMINAL (RED) | ||
| 170-3794 | [1] | RING-TERMINAL | ||
| 5P-0695 E | CONDUIT (345-CM) | |||
| 5P-0760 E | CABLE (0-GA, RED)(380-CM) | |||
| 8T-2225 E | TUBE-HEAT SHRINK (25.4-MM DIA)(32-CM) | |||
| 114-8843 E | SLEEVE-PLASTIC (40-CM) | |||
| 14. | 239-2240 | [1] | BRACKET AS | |
| 15. | 275-6230 | [1] | HARNESS AS-ENGINE | |
| 102-8802 | [3] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8803 | [2] | KIT-RECEPTACLE (3-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2257 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [7] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| 174-0503 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 134-2540 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 214-4208 | [1] | RECEPTACLE AS-CONNECTOR (70-PIN) | ||
| 160-7689 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 126-1774 | [1] | COVER-CONNECTOR | ||
| 114-8843 E | SLEEVE-PLASTIC (260-CM) | |||
| 114-8845 E | SLEEVE-PLASTIC (20-CM) | |||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(20-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(25-CM) | |||
| 121-2844 | [1] | HARNESS AS-WIRING (CRANK WITHOUT INJECT) | ||
| 102-8803 | [2] | KIT-RECEPTACLE (3-PIN) | ||
| (EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 209-6630 | [1] | TAG-INFORMATION | ||
| 16. | 300-5809 C | [1] | BRACKET AS | |
| 17. | 0L-1143 C | [3] | BOLT (3/8-16X2.5-IN) | |
| 18. | 0S-0509 C | [2] | BOLT (3/8-16X0.75-IN) | |
| 19. | 0S-1590 | [1] | BOLT (3/8-16X2-IN) | |
| 20. | 104-6202 | [2] | CLIP (LADDER) | |
| 21. | 132-5789 C | [2] | CLIP (LADDER) | |
| 22. | 161-9926 Y | [1] | SENSOR GP-PRESSURE (TURBOCHARGER INLET) | |
| 23. | 1S-0994 C | [3] | CLIP (LOOP) | |
| 24. | 237-0957 Y | [1] | SENSOR GP-PRESSURE (FAN PUMP) | |
| 25. | 3E-4353 | [2] | WASHER-HARD (11X25X3-MM THK) | |
| 26. | 3J-1907 | [1] | SEAL-O-RING | |
| 27. | 3J-7354 | [1] | SEAL-O-RING | |
| 28. | 4P-7428 C | [2] | CLIP (LADDER) | |
| 29. | 4P-7429 C | [10] | CLIP (LADDER) | |
| 30. | 4P-7581 C | [3] | CLIP (LADDER) | |
| 31. | 4P-7582 | [1] | CLIP (LADDER) | |
| 32. | 4P-8134 C | [6] | CLIP (LADDER) | |
| 33. | 5C-6266 | [2] | BOLT (5/8-11X1-IN) | |
| 34. | 5P-2228 | [2] | BOLT (1/2-13X1-IN) | |
| 35. | 6B-1557 | [1] | BOLT (3/8-16X7.5-IN) | |
| 36. | 6V-4248 CM | [2] | BOLT (M10X1.5X25-MM) | |
| 37. | 6V-5839 | [6] | WASHER (11X21X2.5-MM THK) | |
| 38. | 6V-7357 M | [4] | BOLT (M6X1X25-MM) | |
| 39. | 6V-8801 C | [2] | NUT (3/8-16-THD) | |
| 40. | 6V-9028 | [1] | SEAL-O-RING | |
| 41. | 7J-0204 | [1] | SEAL-O-RING | |
| 42. | 7K-1181 C | [39] | STRAP-CABLE | |
| 43. | 8T-4121 C | [19] | WASHER-HARD (11X21X2.5-MM THK) | |
| 44. | 8T-4122 | [2] | WASHER-HARD (17X32X3.5-MM THK) | |
| 45. | 8T-4133 CM | [3] | NUT (M10X1.5-THD) | |
| 46. | 8T-4136 M | [3] | BOLT (M10X1.5X25-MM) | |
| 47. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 48. | 8T-4186 M | [3] | BOLT (M10X1.5X40-MM) | |
| 49. | 8T-4195 M | [2] | BOLT (M10X1.5X30-MM) | |
| 50. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 51. | 8T-6466 M | [1] | BOLT (M10X1.5X60-MM) | |
| 52. | 9B-7237 | [1] | BOLT (3/8-16X1.25-IN) | |
| 53. | 9X-6458 | [1] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 54. | 9X-8256 | [4] | WASHER (6.6X12X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
