UNDERCARRIAGE
FRAME GP-TRACK ROLLERUNDERCARRIAGE
FRAME GP-TRACK ROLLER
#SEBP36550810
212-3500: FRAME GP-TELESCOPING RECOIL
212-3500 FRAME GP-TELESCOPING RECOIL
S/N RJG1-2170
PART OF 212-2747 UNDERCARRIAGE AR
S/N RJG1-2170
PART OF 212-2747 UNDERCARRIAGE AR
For full view, you need register
Parts for your D10T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7T-4130 | [4] | GUIDE AS | |
| 2. | 7T-4131 | [4] | COVER | |
| 3. | 7T-4133 | [2] | PLATE-THRUST | |
| 4. | 7T-4145 | [2] | SLEEVE | |
| 5. | 8E-2900 | [1] | SHAFT-PIVOT | |
| 6. | 8E-2901 | [2] | PLATE-THRUST | |
| 7. | 8E-2902 | [2] | PLATE-THRUST | |
| 8. | 8T-0208 | [2] | SEAL-PIVOT SHAFT | |
| 9. | 9G-7516 | [32] | PLUG | |
| 10. | 9W-2380 | [2] | RETAINER | |
| 11. | 9W-5575 | [2] | COVER AS | |
| (EACH INCLUDES) | ||||
| 253-1344 | [2] | PLATE-WARNING (HIGH PRESSURE CYLINDER) | ||
| 3H-9675 | [1] | PIN-SPRING | ||
| 9N-1995 | [6] | RIVET-POP | ||
| 12. | 9X-4588 | [2] | SEAL AS | |
| 13. | 187-6289 | [2] | FRAME AS-FRONT | |
| (EACH INCLUDES) | ||||
| 13A. | 7G-1958 | [1] | BUSHING | |
| 4B-4158 | [4] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| 253-1347 | [1] | PLATE-WARNING (RECOIL SPRING) | ||
| 14. | 203-9381 | [2] | RING | |
| 15. | 203-9382 | [2] | GUARD-SEAL | |
| 16. | 203-9383 | [2] | PLATE | |
| 17. | 212-3498 | [1] | FRAME AS (RH) | |
| 18. | 212-3499 | [1] | FRAME AS (LH) | |
| 19. | 252-5158 | [4] | FILM-WARNING (COMPRESSED SPRING, READ OMM) | |
| 20. | 252-6375 | [8] | WASHER-HARD (31X74X10-MM THK) | |
| 21. | 1K-6872 | [6] | LOCKNUT (1/2-13-THD) | |
| 22. | 1P-9254 | [2] | RING-RETAINING | |
| 23. | 2H-3932 | [6] | SEAL-O-RING | |
| 24. | 3K-0360 | [2] | SEAL-O-RING | |
| 25. | 4D-4508 | [2] | SEAL-O-RING | |
| 26. | 4T-2069 | [2] | PLUG-DRAIN (PIVOT SHAFT OIL FILL) | |
| 26A. | 4T-2069 | [4] | PLUG-DRAIN (PIVOT SHAFT OIL DRAIN) | |
| 27. | 5H-6734 | [2] | SEAL-O-RING | |
| 28. | 5P-3092 | [4] | SEAL-O-RING | |
| 29. | 6V-8849 | [24] | BOLT-12 POINT HEAD (3/4-10X3-IN) | |
| 30. | 7G-1952 | [2] | BEARING | |
| 31. | 7G-9709 | [2] | BUSHING | |
| 32. | 7T-4132 | [2] | RING-THRUST | |
| 33. | 7T-4134 | [2] | BUSHING | |
| 34. | 7T-8006 | [2] | RING-RETAINING | |
| 35. | 7X-0328 | [8] | BOLT (1/2-13X3.5-IN) | |
| 36. | 7X-0342 | [24] | BOLT (5/8-11X0.75-IN) | |
| 37. | 7X-0345 | [40] | BOLT (5/8-11X1.75-IN) | |
| 38. | 7X-0420 | [8] | BOLT (1.125-7X50.8-MM) | |
| 39. | 8E-2827 | [2] | RING-RETAINING | |
| 40. | 8T-4122 | [64] | WASHER-HARD (17X32X3.5-MM THK) | |
| 41. | 8T-4223 | [36] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 42. | 8T-4835 | [6] | BOLT (1/2-13X2-IN) | |
| 43. | 8T-8917 | [8] | BOLT (1/2-13X1.25-IN) | |
| 44. | 8T-9389 | [8] | BOLT (1/2-13X2.75-IN) | |
| 45. | 9M-5894 | [2] | SEAL-O-RING | |
| 46. | 9S-4185 | [2] | PLUG (3/4-16-THD) | |
| QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES | ||||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP36550811
351-2682: FRAME GP-TELESCOPING RECOIL
351-2682 FRAME GP-TELESCOPING RECOIL
S/N RJG2171-3999
PART OF 212-2747 UNDERCARRIAGE AR
S/N RJG2171-3999
PART OF 212-2747 UNDERCARRIAGE AR
For full view, you need register
Parts for your D10T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7T-4130 | [4] | GUIDE AS | |
| 2. | 7T-4131 | [4] | COVER | |
| 3. | 7T-4133 | [2] | PLATE-THRUST | |
| 4. | 7T-4145 | [2] | SLEEVE | |
| 5. | 8E-2900 | [1] | SHAFT-PIVOT | |
| 6. | 8E-2901 | [2] | PLATE-THRUST | |
| 7. | 8E-2902 | [2] | PLATE-THRUST | |
| 8. | 8T-0208 | [2] | SEAL-PIVOT SHAFT | |
| 9. | 9G-7516 | [32] | PLUG | |
| 10. | 9W-2380 | [2] | RETAINER | |
| 11. | 9W-5575 | [2] | COVER AS | |
| (EACH INCLUDES) | ||||
| 11A. | 3H-9675 | [1] | PIN-SPRING | |
| 11B. | 9N-1995 | [6] | RIVET-POP | |
| 11C. | 253-1344 | [2] | PLATE-WARNING (HIGH PRESSURE CYLINDER) | |
| 12. | 9X-4588 | [2] | SEAL AS | |
| (EACH INCLUDES) | ||||
| 8T-5071 | [1] | GUARD-SEAL | ||
| [1] | RING-SEAL | |||
| 13. | 187-6289 | [2] | FRAME AS-FRONT | |
| (EACH INCLUDES) | ||||
| 13A. | 7G-1958 | [1] | BUSHING | |
| 13B. | 4B-4158 | [4] | SCREW-DRIVE (NO 4X0.25-IN) | |
| 13C. | 253-1347 | [1] | PLATE-WARNING (RECOIL SPRING) | |
| 14. | 203-9381 | [2] | RING | |
| 15. | 203-9382 | [2] | GUARD-SEAL | |
| 16. | 203-9383 | [2] | PLATE | |
| 17. | 252-5158 | [4] | FILM-WARNING (COMPRESSED SPRING, READ OMM) | |
| 18. | 252-6375 | [8] | WASHER-HARD (31X74X10-MM THK) | |
| 19. | 351-2680 | [1] | FRAME AS (RH) | |
| 7G-5438 | [2] | SUPPORT | ||
| 8E-2813 | [1] | PLATE | ||
| 8E-2814 | [1] | PLATE | ||
| 147-5346 | [1] | BAR | ||
| 147-5347 | [2] | BAR | ||
| 247-5486 | [1] | PLATE | ||
| 247-5487 | [1] | PLATE | ||
| 20. | 351-2681 | [1] | FRAME AS (LH) | |
| 7G-5438 | [2] | SUPPORT | ||
| 8E-2813 | [1] | PLATE | ||
| 8E-2814 | [1] | PLATE | ||
| 147-5346 | [1] | BAR | ||
| 147-5347 | [2] | BAR | ||
| 247-5486 | [1] | PLATE | ||
| 247-5487 | [1] | PLATE | ||
| 21. | 1K-6872 | [6] | LOCKNUT (1/2-13-THD) | |
| 22. | 1P-9254 | [2] | RING-RETAINING | |
| 23. | 2H-3932 | [6] | SEAL-O-RING | |
| 24. | 3K-0360 | [2] | SEAL-O-RING | |
| 25. | 4D-4508 | [2] | SEAL-O-RING | |
| 26. | 4T-2069 | [6] | PLUG-DRAIN | |
| 27. | 5H-6734 | [2] | SEAL-O-RING | |
| 28. | 5P-3092 | [4] | SEAL-O-RING | |
| 29. | 6V-8849 | [24] | BOLT-12 POINT HEAD (3/4-10X3-IN) | |
| 30. | 7G-1952 | [2] | BEARING | |
| 31. | 7G-9709 | [2] | BUSHING | |
| 32. | 7T-4132 | [2] | RING-THRUST | |
| 33. | 7T-4134 | [2] | BUSHING | |
| 34. | 7T-8006 | [2] | RING-RETAINING | |
| 35. | 7X-0328 | [8] | BOLT (1/2-13X3.5-IN) | |
| 36. | 7X-0342 | [24] | BOLT (5/8-11X0.75-IN) | |
| 37. | 7X-0345 | [40] | BOLT (5/8-11X1.75-IN) | |
| 38. | 7X-0420 | [8] | BOLT (1.125-7X50.8-MM) | |
| 39. | 8E-2827 | [2] | RING-RETAINING | |
| 40. | 8T-4122 | [64] | WASHER-HARD (17X32X3.5-MM THK) | |
| 41. | 8T-4223 | [36] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 42. | 8T-4835 | [6] | BOLT (1/2-13X2-IN) | |
| 43. | 8T-8917 | [8] | BOLT (1/2-13X1.25-IN) | |
| 44. | 8T-9389 | [8] | BOLT (1/2-13X2.75-IN) | |
| 45. | 9M-5894 | [2] | SEAL-O-RING | |
| 46. | 9S-4185 | [2] | PLUG (3/4-16-THD) | |
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP36550812
355-1290: FRAME GP-TELESCOPING RECOIL
355-1290 FRAME GP-TELESCOPING RECOIL -RH
S/N RJG1-UP
PART OF 355-1292 UNDERCARRIAGE AR
S/N RJG1-UP
PART OF 355-1292 UNDERCARRIAGE AR
For full view, you need register
Parts for your D10T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7T-4130 | [2] | GUIDE AS | |
| 2. | 7T-4131 | [2] | COVER | |
| 3. | 7T-4133 | [1] | PLATE-THRUST | |
| 4. | 7T-4145 | [1] | SLEEVE | |
| 5. | 8T-0208 | [1] | SEAL-PIVOT SHAFT | |
| 6. | 9G-7516 | [16] | PLUG | |
| 7. | 9W-2380 | [1] | RETAINER | |
| 8. | 9W-5575 | [1] | COVER AS | |
| 8A. | 3H-9675 | [1] | PIN-SPRING | |
| 8B. | 9N-1995 | [6] | RIVET-POP | |
| 8C. | 253-1344 | [2] | PLATE-WARNING (HIGH PRESSURE CYLINDER) | |
| 9. | 9X-4588 | [1] | SEAL AS | |
| 8T-5071 | [1] | GUARD-SEAL | ||
| 10. | 187-6289 | [1] | FRAME AS-FRONT | |
| 10A. | 7G-1958 | [1] | BUSHING | |
| 10B. | 253-1347 | [1] | PLATE-WARNING (RECOIL SPRING) | |
| 10C. | 4B-4158 | [4] | SCREW-DRIVE (NO 4X0.25-IN) | |
| 11. | 252-5158 | [2] | FILM-WARNING (COMPRESSED SPRING, READ OMM) | |
| 12. | 252-6375 | [4] | WASHER-HARD (31X74X10-MM THK) | |
| 13. | 351-2680 | [1] | FRAME AS (RH) | |
| 14. | 2H-3932 | [3] | SEAL-O-RING | |
| 15. | 4D-4508 | [1] | SEAL-O-RING | |
| 16. | 4T-2069 | [3] | PLUG-DRAIN | |
| 17. | 5H-6734 | [1] | SEAL-O-RING | |
| 18. | 5P-3092 | [2] | SEAL-O-RING | |
| 19. | 7G-1952 | [1] | BEARING | |
| 20. | 7G-9709 | [1] | BUSHING | |
| 21. | 7T-4134 | [1] | BUSHING | |
| 22. | 7T-8006 | [1] | RING-RETAINING | |
| 23. | 7X-0342 | [12] | BOLT (5/8-11X0.75-IN) | |
| 24. | 7X-0345 | [20] | BOLT (5/8-11X1.75-IN) | |
| 25. | 7X-0420 | [4] | BOLT (1.125-7X50.8-MM) | |
| 26. | 8E-2827 | [1] | RING-RETAINING | |
| 27. | 8T-4122 | [32] | WASHER-HARD (17X32X3.5-MM THK) | |
| 28. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 29. | 8T-8917 | [4] | BOLT (1/2-13X1.25-IN) | |
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP36550813
355-1291: FRAME GP-TELESCOPING RECOIL
355-1291 FRAME GP-TELESCOPING RECOIL -LH
S/N RJG1-UP
PART OF 355-1293 UNDERCARRIAGE AR
S/N RJG1-UP
PART OF 355-1293 UNDERCARRIAGE AR
For full view, you need register
Parts for your D10T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7T-4130 | [1] | GUIDE AS | |
| 2. | 7T-4131 | [2] | COVER | |
| 3. | 7T-4133 | [1] | PLATE-THRUST | |
| 4. | 7T-4145 | [1] | SLEEVE | |
| 5. | 8T-0208 | [1] | SEAL-PIVOT SHAFT | |
| 6. | 9G-7516 | [16] | PLUG | |
| 7. | 9W-2380 | [1] | RETAINER | |
| 8. | 9W-5575 | [1] | COVER AS | |
| 8A. | 3H-9675 | [1] | PIN-SPRING | |
| 8B. | 9N-1995 | [6] | RIVET-POP | |
| 8C. | 253-1344 | [2] | PLATE-WARNING (HIGH PRESSURE CYLINDER) | |
| 9. | 9X-4588 | [1] | SEAL AS | |
| 8T-5071 | [1] | GUARD-SEAL | ||
| 10. | 187-6289 | [1] | FRAME AS-FRONT | |
| 10A. | 7G-1958 | [1] | BUSHING | |
| 10B. | 253-1347 | [1] | PLATE-WARNING (RECOIL SPRING) | |
| 10C. | 4B-4158 | [4] | SCREW-DRIVE (NO 4X0.25-IN) | |
| 11. | 252-5158 | [2] | FILM-WARNING (COMPRESSED SPRING, READ OMM) | |
| 12. | 252-6375 | [4] | WASHER-HARD (31X74X10-MM THK) | |
| 13. | 351-2681 | [1] | FRAME AS (LH) | |
| 14. | 2H-3932 | [3] | SEAL-O-RING | |
| 15. | 4D-4508 | [1] | SEAL-O-RING | |
| 16. | 4T-2069 | [3] | PLUG-DRAIN | |
| 17. | 5H-6734 | [1] | SEAL-O-RING | |
| 18. | 5P-3092 | [2] | SEAL-O-RING | |
| 19. | 7G-1952 | [1] | BEARING | |
| 20. | 7G-9709 | [1] | BUSHING | |
| 21. | 7T-4134 | [1] | BUSHING | |
| 22. | 7T-8006 | [1] | RING-RETAINING | |
| 23. | 7X-0342 | [12] | BOLT (5/8-11X0.75-IN) | |
| 24. | 7X-0345 | [20] | BOLT (5/8-11X1.75-IN) | |
| 25. | 7X-0420 | [4] | BOLT (1.125-7X50.8-MM) | |
| 26. | 8E-2827 | [1] | RING-RETAINING | |
| 27. | 8T-4122 | [32] | WASHER-HARD (17X32X3.5-MM THK) | |
| 28. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 29. | 8T-8917 | [4] | BOLT (1/2-13X1.25-IN) | |
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP36550814
364-3802: FRAME GP-TELESCOPING RECOIL
364-3802 FRAME GP-TELESCOPING RECOIL -RH
S/N RJG4819-UP
PART OF 371-6873, 371-6874, 371-6876, 371-6877, 371-6878, 372-1172 UNDERCARRIAGE AR
AN ATTACHMENT
S/N RJG4819-UP
PART OF 371-6873, 371-6874, 371-6876, 371-6877, 371-6878, 372-1172 UNDERCARRIAGE AR
AN ATTACHMENT
For full view, you need register
Parts for your D10T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 426-3786 | [1] | COVER AS | |
| 1A. | 4B-4158 | [4] | SCREW-DRIVE (NO 4X0.25-IN) | |
| 1B. | 253-1346 | [1] | PLATE-WARNING (HIGH PRESSURE CYLINDER) | |
| 2. | 7T-4130 | [2] | GUIDE AS | |
| 3. | 7T-4131 | [2] | COVER | |
| 5. | 9G-7516 | [18] | PLUG | |
| 6. | 9X-4588 | [1] | SEAL AS | |
| 8T-5071 | [1] | GUARD-SEAL | ||
| 7. | 187-6289 | [1] | FRAME AS-FRONT | |
| 8. | 252-5158 | [2] | FILM-WARNING (COMPRESSED SPRING, READ OMM) | |
| 9. | 252-6375 | [4] | WASHER-HARD (31X74X10-MM THK) | |
| 11. | 355-1296 Y | [1] | TRACK ADJUSTER & RECOIL GP | |
| 12. | 364-3800 | [1] | FRAME AS (RH) | |
| 13. | 2H-3932 | [3] | SEAL-O-RING | |
| 14. | 3S-1223 | [1] | SEAL-O-RING | |
| 15. | 4T-2069 | [3] | PLUG-DRAIN (PIVOT SHAFT OIL DRAIN/FILL) | |
| 16. | 5P-2566 | [3] | BOLT (1/2-13X1.5-IN) | |
| 17. | 5P-3092 | [2] | SEAL-O-RING | |
| 18. | 7G-1952 | [1] | BEARING | |
| 19. | 7G-9709 | [1] | BUSHING | |
| 20. | 7T-4134 | [1] | BUSHING | |
| 21. | 7T-8006 | [1] | RING-RETAINING | |
| 22. | 7X-0342 | [12] | BOLT (5/8-11X0.75-IN) | |
| 23. | 7X-0345 | [20] | BOLT (5/8-11X1.75-IN) | |
| 24. | 7X-0420 | [4] | BOLT (1.125-7X50.8-MM) | |
| 25. | 8E-2827 | [1] | RING-RETAINING | |
| 26. | 8T-4122 | [32] | WASHER-HARD (17X32X3.5-MM THK) | |
| 27. | 8T-4223 | [3] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP36550815
364-3803: FRAME GP-TELESCOPING RECOIL
364-3803 FRAME GP-TELESCOPING RECOIL -LH
S/N RJG4819-UP
PART OF 371-6873, 371-6874, 371-6876, 371-6877, 371-6878, 372-1172 UNDERCARRIAGE AR
AN ATTACHMENT
S/N RJG4819-UP
PART OF 371-6873, 371-6874, 371-6876, 371-6877, 371-6878, 372-1172 UNDERCARRIAGE AR
AN ATTACHMENT
For full view, you need register
Parts for your D10T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 426-3786 | [1] | COVER AS | |
| 1A. | 4B-4158 | [4] | SCREW-DRIVE (NO 4X0.25-IN) | |
| 1B. | 253-1346 | [1] | PLATE-WARNING (HIGH PRESSURE CYLINDER) | |
| 2. | 7T-4130 | [2] | GUIDE AS | |
| 3. | 7T-4131 | [2] | COVER | |
| 5. | 9G-7516 | [18] | PLUG | |
| 6. | 9X-4588 | [1] | SEAL AS | |
| 8T-5071 | [1] | GUARD-SEAL | ||
| 7. | 187-6289 | [1] | FRAME AS-FRONT | |
| 8. | 252-5158 | [2] | FILM-WARNING (COMPRESSED SPRING, READ OMM) | |
| 9. | 252-6375 | [4] | WASHER-HARD (31X74X10-MM THK) | |
| 11. | 355-1297 Y | [1] | TRACK ADJUSTER & RECOIL GP | |
| 12. | 364-3801 | [1] | FRAME AS | |
| 13. | 2H-3932 | [3] | SEAL-O-RING | |
| 14. | 3S-1223 | [1] | SEAL-O-RING | |
| 15. | 4T-2069 | [3] | PLUG-DRAIN (PIVOT SHAFT OIL DRAIN/FILL) | |
| 16. | 5P-2566 | [3] | BOLT (1/2-13X1.5-IN) | |
| 17. | 5P-3092 | [2] | SEAL-O-RING | |
| 18. | 7G-1952 | [1] | BEARING | |
| 19. | 7G-9709 | [1] | BUSHING | |
| 20. | 7T-4134 | [1] | BUSHING | |
| 21. | 7T-8006 | [1] | RING-RETAINING | |
| 22. | 7X-0342 | [12] | BOLT (5/8-11X0.75-IN) | |
| 23. | 7X-0345 | [20] | BOLT (5/8-11X1.75-IN) | |
| 24. | 7X-0420 | [4] | BOLT (1.125-7X50.8-MM) | |
| 25. | 8E-2827 | [1] | RING-RETAINING | |
| 26. | 8T-4122 | [32] | WASHER-HARD (17X32X3.5-MM THK) | |
| 27. | 8T-4223 | [3] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP36550816
371-6962: FRAME GP-TELESCOPING RECOIL
371-6962 FRAME GP-TELESCOPING RECOIL -RH
S/N RJG4000-4818
PART OF 371-6873, 371-6874, 371-6876, 371-6877, 371-6878, 372-1172 UNDERCARRIAGE AR
AN ATTACHMENT
S/N RJG4000-4818
PART OF 371-6873, 371-6874, 371-6876, 371-6877, 371-6878, 372-1172 UNDERCARRIAGE AR
AN ATTACHMENT
For full view, you need register
Parts for your D10T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7T-4130 | [2] | GUIDE AS | |
| 2. | 7T-4131 | [2] | COVER | |
| 6. | 9G-7516 | [16] | PLUG | |
| 8. | 9W-5575 | [1] | COVER AS | |
| 8A. | 3H-9675 | [1] | PIN-SPRING | |
| 8B. | 9N-1995 | [6] | RIVET-POP | |
| 8C. | 253-1344 | [2] | PLATE-WARNING (HIGH PRESSURE CYLINDER) | |
| 9. | 9X-4588 | [1] | SEAL AS | |
| 8T-5071 | [1] | GUARD-SEAL | ||
| 10. | 187-6289 | [1] | FRAME AS-FRONT | |
| 10A. | 7G-1958 | [1] | BUSHING | |
| 10B. | 253-1347 | [1] | PLATE-WARNING (RECOIL SPRING) | |
| 10C. | 4B-4158 | [4] | SCREW-DRIVE (NO 4X0.25-IN) | |
| 11. | 252-5158 | [2] | FILM-WARNING (COMPRESSED SPRING, READ OMM) | |
| 12. | 252-6375 | [4] | WASHER-HARD (31X74X10-MM THK) | |
| 13. | 351-2680 | [1] | FRAME AS (RH) | |
| 14. | 2H-3932 | [3] | SEAL-O-RING | |
| 16. | 4T-2069 | [3] | PLUG-DRAIN | |
| 17. | 5H-6734 | [1] | SEAL-O-RING | |
| 18. | 5P-3092 | [2] | SEAL-O-RING | |
| 19. | 7G-1952 | [1] | BEARING | |
| 20. | 7G-9709 | [1] | BUSHING | |
| 21. | 7T-4134 | [1] | BUSHING | |
| 22. | 7T-8006 | [1] | RING-RETAINING | |
| 23. | 7X-0342 | [12] | BOLT (5/8-11X0.75-IN) | |
| 24. | 7X-0345 | [20] | BOLT (5/8-11X1.75-IN) | |
| 25. | 7X-0420 | [4] | BOLT (1.125-7X50.8-MM) | |
| 26. | 8E-2827 | [1] | RING-RETAINING | |
| 27. | 8T-4122 | [32] | WASHER-HARD (17X32X3.5-MM THK) | |
| 28. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 29. | 8T-8917 | [4] | BOLT (1/2-13X1.25-IN) | |
| 30. | 355-1296 Y | [1] | TRACK ADJUSTER & RECOIL GP | |
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP36550817
371-6963: FRAME GP-TELESCOPING RECOIL
371-6963 FRAME GP-TELESCOPING RECOIL -LH
S/N RJG4000-4818
PART OF 371-6873, 371-6874, 371-6876, 371-6877, 371-6878, 372-1172 UNDERCARRIAGE AR
AN ATTACHMENT
S/N RJG4000-4818
PART OF 371-6873, 371-6874, 371-6876, 371-6877, 371-6878, 372-1172 UNDERCARRIAGE AR
AN ATTACHMENT
For full view, you need register
Parts for your D10T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7T-4130 | [2] | GUIDE AS | |
| 2. | 7T-4131 | [2] | COVER | |
| 6. | 9G-7516 | [16] | PLUG | |
| 8. | 9W-5575 | [1] | COVER AS | |
| 8A. | 3H-9675 | [1] | PIN-SPRING | |
| 8B. | 9N-1995 | [6] | RIVET-POP | |
| 8C. | 253-1344 | [2] | PLATE-WARNING (HIGH PRESSURE CYLINDER) | |
| 9. | 9X-4588 | [1] | SEAL AS | |
| 8T-5071 | [1] | GUARD-SEAL | ||
| 10. | 187-6289 | [1] | FRAME AS-FRONT | |
| 10A. | 7G-1958 | [1] | BUSHING | |
| 10B. | 253-1347 | [1] | PLATE-WARNING (RECOIL SPRING) | |
| 10C. | 4B-4158 | [4] | SCREW-DRIVE (NO 4X0.25-IN) | |
| 11. | 252-5158 | [2] | FILM-WARNING (COMPRESSED SPRING, READ OMM) | |
| 12. | 252-6375 | [4] | WASHER-HARD (31X74X10-MM THK) | |
| 13. | 351-2681 | [1] | FRAME AS (LH) | |
| 14. | 2H-3932 | [3] | SEAL-O-RING | |
| 16. | 4T-2069 | [3] | PLUG-DRAIN | |
| 17. | 5H-6734 | [1] | SEAL-O-RING | |
| 18. | 5P-3092 | [2] | SEAL-O-RING | |
| 19. | 7G-1952 | [1] | BEARING | |
| 20. | 7G-9709 | [1] | BUSHING | |
| 21. | 7T-4134 | [1] | BUSHING | |
| 22. | 7T-8006 | [1] | RING-RETAINING | |
| 23. | 7X-0342 | [12] | BOLT (5/8-11X0.75-IN) | |
| 24. | 7X-0345 | [20] | BOLT (5/8-11X1.75-IN) | |
| 25. | 7X-0420 | [4] | BOLT (1.125-7X50.8-MM) | |
| 26. | 8E-2827 | [1] | RING-RETAINING | |
| 27. | 8T-4122 | [32] | WASHER-HARD (17X32X3.5-MM THK) | |
| 28. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 29. | 8T-8917 | [4] | BOLT (1/2-13X1.25-IN) | |
| 30. | 355-1297 Y | [1] | TRACK ADJUSTER & RECOIL GP | |
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP36550818
371-6964: FRAME GP-TELESCOPING RECOIL
371-6964 FRAME GP-TELESCOPING RECOIL -WASTE HANDLING-RH
S/N RJG4000-4818
PART OF 371-6875 UNDERCARRIAGE AR
AN ATTACHMENT
S/N RJG4000-4818
PART OF 371-6875 UNDERCARRIAGE AR
AN ATTACHMENT
For full view, you need register
Parts for your D10T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7T-4130 | [2] | GUIDE AS | |
| 2. | 7T-4131 | [2] | COVER | |
| 6. | 9G-7516 | [16] | PLUG | |
| 8. | 9W-5575 | [1] | COVER AS | |
| 8A. | 3H-9675 | [1] | PIN-SPRING | |
| 8B. | 9N-1995 | [6] | RIVET-POP | |
| 8C. | 253-1344 | [2] | PLATE-WARNING (HIGH PRESSURE CYLINDER) | |
| 9. | 9X-4588 | [1] | SEAL AS | |
| 8T-5071 | [1] | GUARD-SEAL | ||
| 10. | 155-2745 | [1] | FRAME AS | |
| 10A. | 7G-1958 | [1] | BUSHING | |
| 10B. | 253-1347 | [1] | PLATE-WARNING (RECOIL SPRING) | |
| 10C. | 4B-4158 | [4] | SCREW-DRIVE (NO 4X0.25-IN) | |
| 11. | 252-5158 | [2] | FILM-WARNING (COMPRESSED SPRING, READ OMM) | |
| 12. | 252-6375 | [4] | WASHER-HARD (31X74X10-MM THK) | |
| 13. | 351-2680 | [1] | FRAME AS (RH) | |
| 14. | 2H-3932 | [3] | SEAL-O-RING | |
| 16. | 4T-2069 | [3] | PLUG-DRAIN | |
| 17. | 5H-6734 | [1] | SEAL-O-RING | |
| 18. | 5P-3092 | [2] | SEAL-O-RING | |
| 19. | 7G-1952 | [1] | BEARING | |
| 20. | 7G-9709 | [1] | BUSHING | |
| 21. | 7T-4134 | [1] | BUSHING | |
| 22. | 7T-8006 | [1] | RING-RETAINING | |
| 23. | 7X-0342 | [12] | BOLT (5/8-11X0.75-IN) | |
| 24. | 7X-0345 | [20] | BOLT (5/8-11X1.75-IN) | |
| 25. | 7X-0420 | [4] | BOLT (1.125-7X50.8-MM) | |
| 26. | 8E-2827 | [1] | RING-RETAINING | |
| 27. | 8T-4122 | [32] | WASHER-HARD (17X32X3.5-MM THK) | |
| 28. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 29. | 8T-8917 | [4] | BOLT (1/2-13X1.25-IN) | |
| 30. | 355-1296 Y | [1] | TRACK ADJUSTER & RECOIL GP | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP36550819
371-6965: FRAME GP-TELESCOPING RECOIL
371-6965 FRAME GP-TELESCOPING RECOIL -WASTE HANDLING-LH
S/N RJG4000-4818
PART OF 371-6875 UNDERCARRIAGE AR
AN ATTACHMENT
S/N RJG4000-4818
PART OF 371-6875 UNDERCARRIAGE AR
AN ATTACHMENT
For full view, you need register
Parts for your D10T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7T-4130 | [1] | GUIDE AS | |
| 2. | 7T-4131 | [2] | COVER | |
| 6. | 9G-7516 | [16] | PLUG | |
| 8. | 9W-5575 | [1] | COVER AS | |
| 8A. | 3H-9675 | [1] | PIN-SPRING | |
| 8B. | 9N-1995 | [6] | RIVET-POP | |
| 8C. | 253-1344 | [2] | PLATE-WARNING (HIGH PRESSURE CYLINDER) | |
| 9. | 9X-4588 | [1] | SEAL AS | |
| 8T-5071 | [1] | GUARD-SEAL | ||
| 10. | 155-2745 | [1] | FRAME AS | |
| 10A. | 7G-1958 | [1] | BUSHING | |
| 10B. | 253-1347 | [1] | PLATE-WARNING (RECOIL SPRING) | |
| 10C. | 4B-4158 | [4] | SCREW-DRIVE (NO 4X0.25-IN) | |
| 11. | 252-5158 | [2] | FILM-WARNING (COMPRESSED SPRING, READ OMM) | |
| 12. | 252-6375 | [4] | WASHER-HARD (31X74X10-MM THK) | |
| 13. | 351-2681 | [1] | FRAME AS (LH) | |
| 14. | 2H-3932 | [3] | SEAL-O-RING | |
| 16. | 4T-2069 | [3] | PLUG-DRAIN | |
| 17. | 5H-6734 | [1] | SEAL-O-RING | |
| 18. | 5P-3092 | [2] | SEAL-O-RING | |
| 19. | 7G-1952 | [1] | BEARING | |
| 20. | 7G-9709 | [1] | BUSHING | |
| 21. | 7T-4134 | [1] | BUSHING | |
| 22. | 7T-8006 | [1] | RING-RETAINING | |
| 23. | 7X-0342 | [12] | BOLT (5/8-11X0.75-IN) | |
| 24. | 7X-0345 | [20] | BOLT (5/8-11X1.75-IN) | |
| 25. | 7X-0420 | [4] | BOLT (1.125-7X50.8-MM) | |
| 26. | 8E-2827 | [1] | RING-RETAINING | |
| 27. | 8T-4122 | [32] | WASHER-HARD (17X32X3.5-MM THK) | |
| 28. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 29. | 8T-8917 | [4] | BOLT (1/2-13X1.25-IN) | |
| 30. | 355-1297 Y | [1] | TRACK ADJUSTER & RECOIL GP | |
| Y | SEPARATE ILLUSTRATION | |||
