HYDRAULIC SYSTEM
CYLINDER GPHYDRAULIC GP
MOTOR GP
HYDRAULIC SYSTEM
CYLINDER GP
#SEBP36551090
192-6446: CYLINDER GP-RIPPER
192-6446 CYLINDER GP-RIPPER -LIFT, LH
S/N TMD1-UP; TMM1-UP; TMN1-UP; 4PP1-UP; TMP1-UP; BRT1-UP; BEY1-UP
234.95-MM (9.25-IN) BORE X 535-MM (21.06-IN) STROKE
PART OF 216-0120, 216-0121, 216-0122, 383-9094, 383-9095, 383-9096 RIPPER AR, 383-9097 RIPPER AR-MULTISHANK
AN ATTACHMENT
S/N TMD1-UP; TMM1-UP; TMN1-UP; 4PP1-UP; TMP1-UP; BRT1-UP; BEY1-UP
234.95-MM (9.25-IN) BORE X 535-MM (21.06-IN) STROKE
PART OF 216-0120, 216-0121, 216-0122, 383-9094, 383-9095, 383-9096 RIPPER AR, 383-9097 RIPPER AR-MULTISHANK
AN ATTACHMENT
For full view, you need register
Parts for your D10T TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4T-5114 | [1] | CYLINDER AS | |
| 1A. | 7J-2086 | [1] | FLANGE | |
| 1B. | 3G-7624 | [1] | BUSHING | |
| 2. | 4J-6888 | [1] | LOCKNUT (2-3/4-12-THD) | |
| 3. | 173-7756 | [2] | WASHER (70.08X114X6.35-MM THK) | |
| 4. | 7J-2087 | [1] | RING-WEAR | |
| 5. | 4T-4143 | [1] | SEAL AS | |
| 6. | 7J-4083 | [1] | PISTON | |
| 7. | 192-6448 | [1] | ROD AS | |
| 7A. | 9J-6549 | [1] | BUSHING | |
| 8. | 1U-3173 | [1] | RING-BACKUP | |
| 9. | 1U-3174 | [1] | SEAL-O-RING | |
| 10. | 8T-8383 | [1] | SEAL-HEAD | |
| 11. | 192-6447 | [1] | HEAD | |
| 225-3286 | [1] | SEAL-WIPER | ||
| 12. | 3B-8489 | [2] | FITTING-GREASE (1/8-27 PTF) | |
| 13. | 132-4907 | [1] | RING-WEAR | |
| 14. | 311-9316 | [1] | SEAL AS-BUFFER | |
| 15. | 311-9317 | [1] | SEAL-U-CUP | |
| 16. | 311-9318 | [1] | SEAL-WIPER | |
| 17. | 5P-8250 | [6] | WASHER (28X49X5-MM THK) | |
| 18. | 1D-4637 | [6] | BOLT (1-8X3.25-IN) | |
| 19. | 1P-4577 | [4] | FLANGE-HALF | |
| 20. | 5S-7382 | [8] | BOLT (3/8-16X1.375-IN) | |
| 21. | 8T-4896 | [8] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP36551091
4T-9977: CYLINDER GP-RIPPER
4T-9977 CYLINDER GP-RIPPER -TILT
S/N TMD1-UP; TMM1-UP; TMN1-UP; 4PP1-UP; TMP1-UP; BRT1-UP; BEY1-UP
209.6-MM (8.25-IN) BORE X 660-MM (26-IN) STROKE
PART OF 216-0120, 216-0121, 216-0122, 383-9094, 383-9095, 383-9096 RIPPER AR, 383-9097 RIPPER AR-MULTISHANK
AN ATTACHMENT
S/N TMD1-UP; TMM1-UP; TMN1-UP; 4PP1-UP; TMP1-UP; BRT1-UP; BEY1-UP
209.6-MM (8.25-IN) BORE X 660-MM (26-IN) STROKE
PART OF 216-0120, 216-0121, 216-0122, 383-9094, 383-9095, 383-9096 RIPPER AR, 383-9097 RIPPER AR-MULTISHANK
AN ATTACHMENT
For full view, you need register
Parts for your D10T TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3B-8489 | [2] | FITTING-GREASE (1/8-27 PTF)(CYLINDER BEARING) | |
| 2. | 105-4172 | [1] | PISTON | |
| 3. | 5J-3488 | [1] | LOCKNUT (2-1/4-12-THD) | |
| 4. | 8T-6745 | [1] | RING-WEAR | |
| 5. | 4J-7376 | [1] | RING-WEAR | |
| 6. | 5J-5559 | [1] | SEAL AS | |
| 7. | 119-8455 | [2] | WASHER (57.3X100X6.35-MM THK) | |
| 8. | 8J-4386 | [1] | SEAL-O-RING | |
| 9. | 3G-3747 | [1] | RING-BACKUP | |
| 10. | 1D-4631 | [2] | BOLT (7/8-9X4.25-IN) | |
| 11. | 5P-8249 | [8] | WASHER-HARD (24X41.5X4-MM THK) | |
| 12. | 105-4169 | [1] | ROD AS | |
| 12A. | 3J-6484 | [2] | BUSHING | |
| 12B. | 4J-4955 | [1] | SPACER (3X100X5-MM THK) | |
| 13. | 8T-4896 | [8] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 14. | 346-5193 | [1] | SEAL AS-BUFFER | |
| 15. | 167-2320 | [1] | SEAL-U-CUP | |
| 16. | 225-3285 | [1] | SEAL-WIPER | |
| 17. | 1D-4627 | [6] | BOLT (7/8-9X3-IN) | |
| 18. | 100-9965 | [1] | HEAD | |
| 19. | 9T-0085 | [1] | CYLINDER AS | |
| 19A. | 3J-6484 | [2] | BUSHING | |
| 19B. | 4J-4955 | [1] | SPACER (3X100X5-MM THK) | |
| 20. | 5S-7382 | [8] | BOLT (3/8-16X1.375-IN) | |
| 21. | 1P-4577 | [4] | FLANGE-HALF | |
| 22. | 8T-8382 | [1] | SEAL-HEAD | |
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP36551092
6E-3113: CYLINDER GP-RIPPER PIN PULLER
6E-3113 CYLINDER GP-RIPPER PIN PULLER
S/N RJG1-UP
101.6-MM (4-IN) BORE X 138.5-MM (5.5-IN) STROKE
PART OF 178-1784, 372-8796 PULLER AR-PIN, 4Z-8946 PULLER GP-PIN
AN ATTACHMENT
S/N RJG1-UP
101.6-MM (4-IN) BORE X 138.5-MM (5.5-IN) STROKE
PART OF 178-1784, 372-8796 PULLER AR-PIN, 4Z-8946 PULLER GP-PIN
AN ATTACHMENT
For full view, you need register
Parts for your D10T TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 173-9779 M | [1] | BOLT (M24X3X80-MM) | |
| 2. | 6J-2797 J | [1] | RING-WEAR | |
| 3. | 5J-5402 J | [1] | SEAL AS | |
| 4. | 9T-3493 | [1] | PISTON | |
| 5. | 6V-8237 | [1] | WASHER (26X44X4-MM THK) | |
| 6. | 4T-6907 J | [1] | RING-WEAR | |
| 7. | 6E-3980 | [1] | ROD AS | |
| 8. | 231-3539 | [1] | SEAL-WIPER | |
| 9. | 167-2300 J | [1] | SEAL-U-CUP | |
| 10. | 167-2190 J | [1] | SEAL AS-BUFFER | |
| 11. | 2K-6830 J | [1] | RING-BACKUP | |
| 12. | 175-7900 J | [1] | SEAL-O-RING | |
| 13. | 6E-4976 | [1] | HEAD | |
| 14. | 6E-3976 | [1] | CYLINDER AS | |
| AVAILABLE REPAIR KIT(S): | ||||
| 240-4819 J | [1] | KIT-SEAL (HYDRAULIC CYLINDER) | ||
| (INCLUDES RINGS & SEALS) | ||||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
| M | METRIC PART | |||
#SEBP36551093
232-0654: CYLINDER GP-TILT
232-0654 CYLINDER GP-TILT -BULLDOZER
S/N BHA1-UP; BHF1-UP; RJG1-UP; BHJ1-UP; BHP1-UP
234.95-MM (9.25-IN) BORE X 238-MM (9.48-IN) STROKE
PART OF 235-2812 PUSH ARM GP-STABILIZER
AN ATTACHMENT
S/N BHA1-UP; BHF1-UP; RJG1-UP; BHJ1-UP; BHP1-UP
234.95-MM (9.25-IN) BORE X 238-MM (9.48-IN) STROKE
PART OF 235-2812 PUSH ARM GP-STABILIZER
AN ATTACHMENT
For full view, you need register
Parts for your D10T TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3B-8489 | [1] | FITTING-GREASE (1/8-27 PTF) | |
| 2. | 3G-8633 | [1] | PISTON | |
| 3. | 5J-1572 | [6] | BOLT (1-1/8-7X4.25-IN) | |
| 4. | 9T-1181 | [1] | ROD AS | |
| 4A. | 5L-4756 | [2] | RING-RETAINING | |
| 4B. | 117-3006 | [1] | BEARING | |
| 5. | 9T-4447 | [1] | HEAD AS | |
| 225-3287 | [1] | SEAL-WIPER | ||
| 6. | 234-0142 | [1] | CYLINDER AS | |
| 6A. | 1U-2532 | [2] | BAR | |
| 6B. | 1U-3658 | [1] | HANDLE | |
| 6C. | 3G-7961 | [1] | LUG | |
| 6D. | 4J-2379 | [2] | BUSHING | |
| 7. | 158-3032 | [1] | RING-BACKUP | |
| 8. | 167-2216 | [1] | SEAL AS-BUFFER | |
| 9. | 167-2331 | [1] | SEAL-U-CUP | |
| 10. | 1U-3174 | [1] | SEAL-O-RING | |
| 11. | 225-3287 | [1] | SEAL-WIPER | |
| 12. | 3S-1349 | [6] | WASHER-HARD (31X52.5X6-MM THK) | |
| 13. | 4T-4143 | [1] | SEAL AS | |
| 14. | 7J-2087 | [1] | RING-WEAR | |
| 15. | 7J-9250 | [1] | LOCKNUT (3-1/4X12-THD) | |
| 16. | 8T-6747 | [1] | RING-WEAR | |
| 17. | 8T-8383 | [1] | SEAL-HEAD | |
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP36551094
398-9668: CYLINDER GP-TILT
398-9668 CYLINDER GP-TILT -BULLDOZER
S/N RJG4000-UP
234.96-MM (9.25-IN) BORE X 101.6-MM (4-IN) STROKE
PART OF 235-2812 PUSH ARM GP-STABILIZER
AN ATTACHMENT
S/N RJG4000-UP
234.96-MM (9.25-IN) BORE X 101.6-MM (4-IN) STROKE
PART OF 235-2812 PUSH ARM GP-STABILIZER
AN ATTACHMENT
For full view, you need register
Parts for your D10T TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3G-8633 | [1] | PISTON | |
| 2. | 158-3032 | [1] | RING-BACKUP | |
| 3. | 234-0142 | [1] | CYLINDER AS | |
| 4. | 397-9471 | [1] | ROD AS | |
| 4A. | 5L-4756 | [2] | RING-RETAINING | |
| 4B. | 117-3006 | [1] | BEARING | |
| 5. | 398-9666 | [1] | HEAD | |
| 311-9321 | [1] | SEAL-WIPER | ||
| 6. | 1U-3174 | [1] | SEAL-O-RING | |
| 7. | 311-9319 | [1] | SEAL AS-BUFFER | |
| 8. | 311-9320 | [1] | SEAL-U-CUP | |
| 9. | 311-9321 | [1] | SEAL-WIPER | |
| 10. | 3B-8489 | [1] | FITTING-GREASE (1/8-27 PTF) | |
| 11. | 3S-1349 | [6] | WASHER-HARD (31X52.5X6-MM THK) | |
| 12. | 4T-4143 | [1] | SEAL AS | |
| 13. | 5J-1572 | [6] | BOLT (1-1/8-7X4.25-IN) | |
| 14. | 7J-2087 | [1] | RING-WEAR | |
| 15. | 7J-9250 | [1] | LOCKNUT (3-1/4X12-THD) | |
| 16. | 8T-6747 | [1] | RING-WEAR | |
| 17. | 8T-8383 | [1] | SEAL-HEAD |
#SEBP36551095
491-0259: CYLINDER GP-TILT
491-0259 CYLINDER GP-TILT
S/N RJG1-UP
235-MM (9.3-IN) BORE X 241-MM (9.5-IN) STROKE
AN ATTACHMENT
S/N RJG1-UP
235-MM (9.3-IN) BORE X 241-MM (9.5-IN) STROKE
AN ATTACHMENT
For full view, you need register
Parts for your D10T TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1U-3174 | [1] | SEAL-O-RING | |
| 2. | 3B-8489 | [1] | FITTING-GREASE (1/8-27 PTF) | |
| 3. | 4J-6888 | [1] | LOCKNUT (2-3/4-12-THD) | |
| 4. | 4T-4143 | [1] | SEAL AS | |
| 5. | 7J-2087 | [1] | RING-WEAR | |
| 6. | 8T-6747 | [1] | RING-WEAR | |
| 7. | 8T-8383 | [1] | SEAL-HEAD | |
| 8. | 158-3032 | [1] | RING-BACKUP | |
| 9. | 234-0142 | [1] | CYLINDER AS | |
| 9A. | 4J-2379 | [2] | BUSHING | |
| 10. | 311-9319 | [1] | SEAL AS-BUFFER | |
| 11. | 311-9320 | [1] | SEAL-U-CUP | |
| 12. | 311-9321 | [1] | SEAL-WIPER | |
| 13. | 398-9666 | [1] | HEAD | |
| 311-9321 | [1] | SEAL-WIPER | ||
| 14. | 491-0260 | [1] | ROD AS | |
| 14A. | 117-3006 | [1] | BEARING | |
| 5L-4756 | [2] | RING-RETAINING | ||
| 15. | 491-0262 | [1] | PISTON | |
| 16. | 3S-1349 | [6] | WASHER-HARD (31X52.5X6-MM THK) | |
| 17. | 5J-1572 | [6] | BOLT (1-1/8-7X4.25-IN) |
#SEBP36551096
212-2742: HYDRAULIC AR
For full view, you need register
Parts for your D10T TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 208-6074 Y | [1] | CONTROL GP-JOYSTICK (BULLDOZER) | ||
| 213-0007 Y | [1] | LINES GP-HYDRAULIC FAN | ||
| 213-0001 Y | [1] | LINES GP-LIFT CYLINDER | ||
| 213-0004 Y | [1] | LINES GP-MOTOR | ||
| 213-0006 Y | [1] | LINES GP-PILOT | ||
| 213-0000 Y | [1] | LINES GP-PUMP | ||
| 213-0002 Y | [1] | LINES GP-TILT CYLINDER | ||
| 212-0272 Y | [1] | MOTOR GP-PISTON (HYDRAULIC FAN) | ||
| 228-0272 Y | [1] | PUMP GP-GEAR (IMPLEMENT) | ||
| 220-0780 Y | [1] | PUMP GP-PISTON (HYDRAULIC FAN) | ||
| 213-0003 Y | [1] | TANK & MTG GP-HYDRAULIC | ||
| 213-0005 Y | [1] | VALVE & MTG GP-BULLDOZER (2-FUNCTION) | ||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP36551097
269-8382: HYDRAULIC AR
For full view, you need register
Parts for your D10T TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 208-6074 Y | [1] | CONTROL GP-JOYSTICK (BULLDOZER) | ||
| S/N RJG529-684 | ||||
| 242-6207 Y | [1] | CONTROL GP-JOYSTICK (BULLDOZER) | ||
| S/N RJG685-1799 | ||||
| 327-3542 Y | [1] | CONTROL GP-JOYSTICK (BULLDOZER) | ||
| S/N RJG1800-3999 | ||||
| 213-0007 Y | [1] | LINES GP-HYDRAULIC FAN | ||
| 213-0001 Y | [1] | LINES GP-LIFT CYLINDER | ||
| 269-8383 Y | [1] | LINES GP-MOTOR | ||
| 213-0006 Y | [1] | LINES GP-PILOT | ||
| 213-0000 Y | [1] | LINES GP-PUMP | ||
| 213-0002 Y | [1] | LINES GP-TILT CYLINDER | ||
| 212-0272 Y | [1] | MOTOR GP-PISTON (HYDRAULIC FAN) | ||
| 272-9795 Y | [1] | PUMP GP-GEAR (IMPLEMENT) | ||
| 220-0780 Y | [1] | PUMP GP-PISTON (HYDRAULIC FAN) | ||
| 213-0003 Y | [1] | TANK & MTG GP-HYDRAULIC | ||
| 213-0005 Y | [1] | VALVE & MTG GP-BULLDOZER (2-FUNCTION) | ||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP36551098
369-0409: HYDRAULIC AR
For full view, you need register
Parts for your D10T TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 196-9987 Y | [1] | CONTROL & MTG GP-JOYSTICK (RIPPER) | ||
| 371-2521 Y | [1] | LINES GP-HYDRAULIC FAN | ||
| 371-6903 Y | [1] | LINES GP-LIFT CYLINDER | ||
| 269-8383 Y | [1] | LINES GP-MOTOR | ||
| 371-2525 Y | [1] | LINES GP-PILOT | ||
| 371-2524 Y | [1] | LINES GP-PUMP | ||
| 371-6906 Y | [1] | LINES GP-RIPPER | ||
| 371-2526 Y | [1] | LINES GP-TILT CYLINDER | ||
| 9J-6006 Y | [1] | MOUNTING GP-CYLINDER | ||
| 272-9795 Y | [1] | PUMP GP-GEAR (IMPLEMENT) | ||
| 220-0780 Y | [1] | PUMP GP-PISTON (HYDRAULIC FAN) | ||
| 213-0003 Y | [1] | TANK & MTG GP-HYDRAULIC | ||
| 213-0005 Y | [1] | VALVE & MTG GP-BULLDOZER (2-FUNCTION) | ||
| 285-0139 Y | [1] | VALVE GP-CONTROL (RIPPER) | ||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP36551099
388-2556: KIT-RETROFIT
388-2556 KIT-RETROFIT -GRADE CONTROL
S/N RJG1-UP
FOR USE WITH MACHINES NOT EQUIPPED WITH 326-9567 FRONT CONSOLE
FIELD INSTALLATION
S/N RJG1-UP
FOR USE WITH MACHINES NOT EQUIPPED WITH 326-9567 FRONT CONSOLE
FIELD INSTALLATION
For full view, you need register
Parts for your D10T TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 457-4645 Y | [1] | CONTROL GP-JOYSTICK (BULLDOZER, IMPLEMENT)(BULLDOZER) | ||
| 252-5112 | [1] | BASE AS | ||
| 331-9583 | [1] | BRACKET AS | ||
| 331-9584 | [1] | BRACKET AS | ||
| 332-1107 | [1] | BRACKET AS | ||
| 332-1108 | [1] | BRACKET AS | ||
| 306-2050 | [1] | HARNESS AS-CONTROL | ||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| 190-7615 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8735 | [1] | PLUG-CONNECTOR | ||
| 8T-8736 | [1] | RECEPTACLE-CONNECTOR (9-PIN) | ||
| 8T-8737 | [27] | PLUG-SEAL | ||
| 9X-3401 | [14] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3402 | [9] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM) | |||
| 126-1767 | [4] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 230-5008 | [3] | PLUG AS-CONNECTOR (4-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7031 | [1] | SEAL-CONNECTOR | ||
| 248-5358 | [1] | PLUG AS-CONNECTOR (39-PIN) | ||
| 274-3782 | [3] | CAP-SEAL | ||
| 331-8549 | [1] | HARNESS AS-WIRING (MAST, LH) | ||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8737 | [2] | PLUG-SEAL | ||
| 9X-3401 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 114-8843 E | SLEEVE-PLASTIC (20-CM) | |||
| 126-1767 | [4] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 228-3323 | [2] | CLIP-SPRING | ||
| 253-0040 | [1] | HARNESS AS-RADIO (RECEIVER) | ||
| 1S-9593 | [1] | STRAP-CABLE | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM) | |||
| 9X-3402 | [10] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [10] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 126-1768 | [2] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 167-8987 | [1] | PLUG AS-CONNECTOR (8-PIN) | ||
| 268-3371 | [1] | CAP AS-CONNECTOR | ||
| 363-9053 | [1] | CAP AS-CONNECTOR | ||
| 331-8550 | [1] | HARNESS AS-WIRING (MAST, RH) | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9X-3401 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 114-8843 E | SLEEVE-PLASTIC (20-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM) | |||
| 126-1767 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 228-3323 | [1] | CLIP-SPRING | ||
| 1Q-1592 | [1] | PLATE AS | ||
| 261-4983 | [1] | PLATE AS | ||
| 282-8243 | [1] | PLATE AS | ||
| 282-8271 | [1] | PLATE AS | ||
| 310-5774 | [1] | PLATE AS | ||
| 245-4252 | [1] | SHIELD AS | ||
| 189-9240 | [1] | LINK | ||
| 4L-6454 | [4] | BOLT (3/8-16X1-IN) | ||
| 8T-4137 M | [4] | BOLT (M10X1.5X20-MM) | ||
| 8T-4141 M | [12] | BOLT (M20X2.5X70-MM) | ||
| 8T-4183 M | [12] | BOLT (M12X1.75X40-MM) | ||
| 8T-4194 M | [4] | BOLT (M12X1.75X50-MM) | ||
| 8T-4956 M | [4] | BOLT (M12X1.75X35-MM) | ||
| 8T-9397 | [2] | BOLT (3/4-10X1.25-IN) | ||
| 236-8826 | [3] | BOSS (1-1/8-18X0.708-IN) | ||
| 7R-3029 | [3] | CAP-DUST | ||
| 326-9567 | [1] | CONSOLE-FRONT | ||
| 282-8249 | [1] | COVER | ||
| 297-0693 | [1] | FILM-IDENTIFICATION (JOYSTICK) | ||
| 325-1558 | [1] | FILM-IDENTIFICATION (DUAL RECEIVER MAST) | ||
| 325-9417 | [2] | FILM-IDENTIFICATION (TILT SENSOR) | ||
| 252-5111 | [2] | GASKET | ||
| 2Y-5429 | [2] | GROMMET | ||
| 261-7991 | [1] | GROMMET | ||
| 214-2015 | [1] | LATCH | ||
| 8T-2659 M | [2] | LOCKNUT (M4X0.7-THD) | ||
| 230-7732 | [2] | MOUNTING-CABLE TIE | ||
| 8T-4131 M | [12] | NUT (M20X2.5-THD) | ||
| 308-1395 | [3] | PLATE | ||
| 338-1143 | [1] | PLATE | ||
| 338-1144 | [1] | PLATE | ||
| 9X-1046 M | [2] | SCREW (M4X0.7X18-MM) | ||
| 131-3539 M | [3] | SCREW-FLAT HEAD (M8X1.25X30-MM) | ||
| 5P-8395 | [12] | SCREW-MACHINE | ||
| 271-9408 M | [4] | SCREW-TRUSS HEAD (M5X0.8X10-MM) | ||
| 7K-1181 | [13] | STRAP-CABLE | ||
| 4B-4863 | [2] | WASHER (4.7X11X1.2-MM THK) | ||
| 5P-1075 | [4] | WASHER-HARD (10.2X22.5X3-MM THK) | ||
| 5P-1076 | [6] | WASHER-HARD (13.5X30X4-MM THK) | ||
| 7X-0582 | [2] | WASHER-HARD (20X44.5X6-MM THK) | ||
| 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | ||
| 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | ||
| 198-4778 | [10] | WASHER-HARD (13.5X30X12-MM THK) | ||
| 198-4781 | [24] | WASHER-HARD (22X40X10-MM THK) | ||
| 204-6102 | [4] | WASHER-HARD (4.45X9.52X1-MM THK) | ||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
