AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

274-7395 SENSOR GP-TEMPERATURE S/N BMA25666-UP; CSW2238-UP PART OF 199-7734 SENSOR GP-ENGINE 561N PIPELAYER


ELECTRICAL AND STARTING SYSTEM
SENSOR GP
ELECTRONICS GP-POWER TRAIN
STARTING AID GP
STARTING MOTOR GP
SWITCH GP

PIPELAYER 561N PIPELAYER CPH
 561N Pipelayer CPH00001-UP (MACHINE) POWERED BY 3126B Engine SEBP3656 561N CPH   (2003)

ELECTRICAL AND STARTING SYSTEM

SENSOR GP
SENSOR GP-TEMPERATURE
197-8392 SENSOR GP-TEMPERATURE
SENSOR GP-TEMPERATURE
204-0320 SENSOR GP-TEMPERATURE
SENSOR GP-TEMPERATURE
274-7395 SENSOR GP-TEMPERATURE
SENSOR GP-TEMPERATURE
274-7396 SENSOR GP-TEMPERATURE
 

#SEBP36560220
 

274-7395: SENSOR GP-TEMPERATURE

274-7395 SENSOR GP-TEMPERATURE
S/N BMA25666-UP; CSW2238-UP
PART OF 199-7734 SENSOR GP-ENGINE
i02397683 SEBP3656
2747395 SENSOR GP-TEMPERATURE Parts scheme
  For full view, you need register

Parts for your 561N PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 264-4297 [1] SENSOR AS-TEMPERATURE (2-PIN)  
  137-6645 [1] PAD-CONNECTOR  
2. 238-5080 [1] SEAL-O-RING  
 

#SEBP36560221
 

274-7396: SENSOR GP-TEMPERATURE

274-7396 SENSOR GP-TEMPERATURE
S/N BMA25666-UP; CSW2238-UP
PART OF 199-7734 SENSOR GP-ENGINE
i02404274 SEBP3656
2747396 SENSOR GP-TEMPERATURE Parts scheme
  For full view, you need register

Parts for your 561N PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 264-4297 [1] SENSOR AS-TEMPERATURE (2-PIN)  
  137-6645 [1] PAD-CONNECTOR  
2. 6V-6609 [1] SEAL-O-RING  
 

#SEBP36560222
 

236-5453: SERVICE GP-POWER TRAIN

236-5453 SERVICE GP-POWER TRAIN
S/N TAD1-UP; CPH1-UP
PART OF 252-4448 ELECTRONICS GP-POWER TRAIN
i02098317 SEBP3656
2365453 SERVICE GP-POWER TRAIN Parts scheme
  For full view, you need register

Parts for your 561N PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 172-9389 Y [1] CONTROL GP-UNPROGRAMMED  
   
  236-5452 F [1] SOFTWARE GP-POWER TRAIN  
  F   NOT SHOWN
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP36560223
 

230-2530: STARTING AID GP

230-2530 STARTING AID GP -AIR INLET
S/N BMA5896-15221
24 VOLT
PART OF 201-9065 ENGINE AR-COMPLETE
i01942412 SEBP3656
2302530 STARTING AID GP Parts scheme
  For full view, you need register

Parts for your 561N PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 230-2532 [1] STRAP-GROUNDING  
2. 231-1223 [1] CABLE AS  
  6V-9023 BE TUBE-HEAT SHRINK (12.7-MM DIA)  
2A. 030-1712 [1] TERMINAL-RING (2-GA, 1/4-IN SCREW)  
2B. 135-2543 [1] BOOT (RED)  
4. 223-7577 Y [1] SWITCH GP-MAGNETIC (AIR INLET HEATER)  
5. 4P-8134 [1] CLIP (LADDER)  
6. 6V-2317 M [7] BOLT (M8X1.25X30-MM)  
7. 9M-1974 [7] WASHER-HARD (8.8X16X2-MM THK)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36560224
 

230-2530: STARTING AID GP

230-2530 STARTING AID GP -AIR INLET
S/N BMA15222-UP; CSW2238-UP
24 VOLT
PART OF 201-9065 ENGINE AR-COMPLETE
i02148128 SEBP3656
2302530 STARTING AID GP Parts scheme
  For full view, you need register

Parts for your 561N PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 229-8851 [1] CABLE AS  
  6V-9023 E [3] TUBE-HEAT SHRINK (12.7-MM DIA)  
1A. 030-1712 [1] TERMINAL-RING (2-GA, 1/4-IN SCREW)  
1B. 135-2543 [1] BOOT (RED)  
2. 223-7577 Y [1] SWITCH GP-MAGNETIC (AIR INLET HEATER)  
3. 4P-8134 [1] CLIP (LADDER)  
4. 6V-2317 M [7] BOLT (M8X1.25X30-MM)  
5. 9M-1974 [7] WASHER-HARD (8.8X16X2-MM THK)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36560225
 

145-5157: STARTING MOTOR GP-ELECTRIC

145-5157 STARTING MOTOR GP-ELECTRIC
S/N BMA5896-UP; CSW2238-UP
PART OF 201-9065 ENGINE AR-COMPLETE
i00737146 SEBP3656
1455157 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 561N PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 108-7808 M [3] BOLT (M10X1.5X35-MM)  
2. 6V-5839 [3] WASHER (11X21X2.5-MM THK)  
3. 3K-3257 [1] GASKET  
4. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
5. 8Y-9603 [1] CABLE AS-STARTING MOTOR  
  1S-7251 [1] TERMINAL-CABLE (00-GA, 1/2-IN SCREW)  
  1S-7252 [1] TERMINAL-CABLE (00-GA, 3/8-IN SCREW)  
  5P-0747 E CABLE (00-GA, BLACK)(27.5CM)  
6. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
7. 207-1519 Y [1] STARTING MOTOR GP-ELECTRIC  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP36560226
 

207-1519: STARTING MOTOR GP-ELECTRIC

207-1519 STARTING MOTOR GP-ELECTRIC
S/N BMA6475-UP; CSW2238-UP
24 VOLT
PART OF 145-5157 STARTING MOTOR GP-ELECTRIC
i01623729 SEBP3656
2071519 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 561N PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-9884 [1] KIT-INSULATOR (STARTING MOTOR)  
    (INCLUDES BUSHING)
2. 106-7149 [1] HOUSING AS  
3. 102-9863 [1] TERMINAL AS  
4. 6V-8188 [4] NUT (1/2-13-THD)  
5. 7X-0562 [4] WASHER-HARD (13.5X19X0.8-MM THK)  
6. 3E-7853 [1] TERMINAL  
7. 9X-4821 [1] PLATE AS  
8. 3E-7852 [1] COIL-STARTING MOTOR (24-VOLT)  
9. 7T-3454 [1] INSULATOR  
10. 9X-4271 [1] CONNECTOR  
11. 7T-3451 [1] KIT-INSULATOR (STARTING MOTOR)  
    (INCLUDES GROMMET
12. 8T-8569 [1] INSULATOR-TERMINAL  
13. 5S-7349 [4] BOLT (1/4-20X0.5-IN)  
14. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
15. 7X-1950 [4] SHOE-POLE  
16. 3E-7861 [1] KIT-LEVER (STARTING MOTOR)  
    (INCLUDES LEVER AS, GASKET, SHAFT AS, NUT, RING & O-RINGS)
17. 3R-8797 [8] SCREW & WASHER AS (3/8-24X0.72-IN)  
18. 3E-7855 [1] ARMATURE AS-STARTER (24-VOLT)  
19. 7X-1952 [1] HOUSING AS-LEVER  
20. 4M-1831 [1] PLUG-LEVER HOUSING  
21. 7L-2894 [1] GASKET  
22. 0S-1597 [5] BOLT (1/4-28X1-IN)  
23. 3E-7857 [1] DRIVE AS-STARTING MOTOR  
24. 3E-7858 [1] HOUSING AS  
25. 7X-3373 [6] BOLT (5/16-18X0.88-IN)  
26. 206-8784 [1] KIT-SOLENOID (24-VOLT)  
    (INCLUDES BOLT, NUTS & CONNECTORS)
27. 6V-8378 [2] NUT (10-32-THD)  
28. 8F-1434 [1] LOCKWASHER  
29. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
30. 9X-4824 [1] COVER-STARTING MOTOR  
31. 9X-4825 [1] KIT-BRUSH (24-VOLT)  
    (INCLUDES SCREW AS, O-RING, SCREWS, BRUSHES & SPRINGS)
   
    AVAILABLE REPAIR KIT(S):
  3E-7860 [1] KIT-BUSHING (STARTING MOTOR)  
    (INCLUDES SEAL, NUT, GASKET, SPACER, SCREW AS, CUPS, BUSHINGS, WASHERS, O-RINGS & PLUGS)
 

#SEBP36560227
 

7N-0718: SWITCH GP-DISCONNECT

7N-0718 SWITCH GP-DISCONNECT -BATTERY
S/N TAD1-UP; CPH1-UP
PART OF 235-6785 BATTERY & WIRING GP
i00407855 SEBP3656
7N0718 SWITCH GP-DISCONNECT Parts scheme
  For full view, you need register

Parts for your 561N PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2H-3922 [2] LOCKWASHER  
2. 8H-5303 [1] NUT (3/4-16-THD)  
3. 264-3617 [2] LOCKWASHER  
4. 6F-7045 [2] NUT-FULL (3/8-24-THD)  
5. 8H-5306 [1] KEY (BATTERY DISCONNECT)  
 

#SEBP36560228
 

125-1302: SWITCH GP-MAGNETIC

125-1302 SWITCH GP-MAGNETIC -START RELAY
S/N TAD1-UP; CPH1-UP
24-VOLT
PART OF 156-8378, 234-2789, 248-5667, 275-8263 PANEL GP-CIRCUIT BREAKER
i01808058 SEBP3656
1251302 SWITCH GP-MAGNETIC Parts scheme
  For full view, you need register

Parts for your 561N PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
2. 8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
3. 1H-3338 [2] LOCKWASHER (EXTERNAL TOOTH)  
4. 3B-4504 [2] LOCKWASHER  
5. 5C-2890 M [2] NUT (M6X1-THD)  
6. 9X-1813 E SLEEVE (16-CM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP36560229
 

167-0138: SWITCH GP-MAGNETIC

167-0138 SWITCH GP-MAGNETIC -MAIN RELAY
S/N CPH1-114
PART OF 156-8378, 234-2789 PANEL GP-CIRCUIT BREAKER
i01172942 SEBP3656
1670138 SWITCH GP-MAGNETIC Parts scheme
  For full view, you need register

Parts for your 561N PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4F-2294 [2] NUT-JAM (5/16-24-THD)  
2. 6V-8186 [2] NUT-FULL (5/16-24-THD)  
3. 155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS & WEDGE)
4. 186-3736 [2] SOCKET-CONNECTOR (16-GA TO 18-GA)  
5. 155-2261 [1] WEDGE-PLUG LOCK (2-PIN)  
 

Information:

Specifications
Engine Oil Pressure Sensor - If Equipped
3126B Engine for Caterpillar Built Machines
Atmospheric Pressure Sensor - If Equipped
3126B Engine for Caterpillar Built Machines
Inlet Air Temperature Sensor
3126B Engine for Caterpillar Built Machines
Injection Actuation Pressure Sensor
3126B Engine for Caterpillar Built Machines
Coolant Temperature Sensor
3126B Engine for Caterpillar Built Machines
Engine Oil Temperature Sensor
3126B Engine for Caterpillar Built Machines
Fuel Pressure Sensor
3126B Engine for Caterpillar Built Machines
Speed/Timing Sensor
3126B Engine for Caterpillar Built Machines
Turbocharger Outlet Pressure Sensor
3126B Engine for Caterpillar Built Machines
Turbocharger Inlet Pressure Sensor
3126B Engine for Caterpillar Built Machines
Speed Sensor
3126B Engine for Caterpillar Built Machines
Tool Operating Manual
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Troubleshooting
CID 0261 FMI 13 Engine Timing Calibration required
3126B Engine for Caterpillar Built Machines
CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
3126B Engine for Caterpillar Built Machines
CID 0100 FMI 04 Engine Oil Pressure short to ground
3126B Engine for Caterpillar Built Machines
CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0172 FMI 04 Intake Manifold Air Temp short to ground
3126B Engine for Caterpillar Built Machines
CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 0273 FMI 03 Turbo Outlet Pressure open/short to +batt
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 0273 FMI 04 Turbo Outlet Pressure short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0274 FMI 04 Atmospheric Pressure short to ground
3126B Engine for Caterpillar Built Machines
CID 0041 FMI 04 8 Volt DC Supply short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0091 FMI 08 Throttle Position signal abnormal
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0094 FMI 03 Fuel Pressure open/short to +batt
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 0094 FMI 04 Fuel Pressure short to ground
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
3126B Engine for Caterpillar Built Machines
CID 0110 FMI 04 Engine Coolant Temperature short to ground
3126B Engine for Caterpillar Built Machines
CID 0164 FMI 00 High Injector Actuation Pressure
3126B Engine for Caterpillar Built Machines
CID 0164 FMI 03 Injector Actuation Pressure voltage high
3126B Engine for Caterpillar Built Machines
CID 0175 FMI 03 Engine Oil Temperature open/short to +batt
3126B Engine for Caterpillar Built Machines
CID 0175 FMI 04 Engine Oil Temperature short to ground
3126B Engine for Caterpillar Built Machines
CID 0600 FMI 03 Hydraulic Oil Temperature open/short to +batt
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0600 FMI 04 Hydraulic Oil Temperature short to ground
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0041 FMI 03 8 Volt DC Supply short to +batt
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
How To Use the Functional Tests
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Sensors and Electrical Connectors
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 0091 FMI 08 Throttle Position signal abnormal
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 0164 FMI 11 Injector Actuation Pressure system fault
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 0190 FMI 02 Loss of Engine Speed Signal
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0190 FMI 11 Engine Speed Sensor mechanical failure
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
5 Volt Engine Pressure Sensor Supply Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Engine Speed/Timing Sensor Circuit - Test
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
Engine Speed/Timing Sensor - Calibrate
3126B Engine for Caterpillar Built Machines
Throttle Position Sensor Circuit - Test
3126B Engine for Caterpillar Built Machines
Digital Sensor Supply Circuit - Test
3126B Engine for Caterpillar Built Machines
Digital Sensor Supply Circuit - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Throttle Position Sensor Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 1582 FMI 03 Trans Lube Oil Temp Sensor open/short to +batt
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 1582 FMI 04 Trans Lube Oil Temp Sensor short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 1589 FMI 03 Turbo Inlet Air Pressure Sensor open/shrt to +bat
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Sensors and Electrical Connectors
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0342 FMI 03 Secondary Engine Speed open/short to +batt
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Analog Sensor Supply Circuit - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
5 Volt Engine Pressure Sensor Supply Circuit - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0164 FMI 02 Injector Actuation Pressure signal erratic
3126B Engine for Caterpillar Built Machines
CID 0342 FMI 02 Loss of Secondary Engine Speed signal
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Engine Temperature Sensor Open or Short Circuit - Test
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 0164 FMI 04 Injector Actuation Pressure voltage low
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
Engine Pressure Sensor Open or Short Circuit - Test
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
E095 Fuel Filter Restriction Warning
3126B Engine for Caterpillar Built Machines
CID 0342 FMI 11 Secondary Engine Speed Sensor mechanical failure
3126B Engine for Caterpillar Built Machines
Injection Actuation Pressure Sensor - Test
3126B Engine for Caterpillar Built Machines
Sensors and Electrical Connectors
3126B Engine for Caterpillar Built Machines
5 Volt Engine Pressure Sensor Supply Circuit - Test
3126B Engine for Caterpillar Built Machines
Engine Pressure Sensor Open or Short Circuit - Test
3126B Engine for Caterpillar Built Machines
Engine Temperature Sensor Open or Short Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Sensors and Electrical Connectors
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Analog Sensor Supply Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
3126B Engine for Caterpillar Built Machines
CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
3126B Engine for Caterpillar Built Machines
Sensors and Electrical Connectors
3126B Engine for Caterpillar Built Machines
Engine Pressure Sensor Open or Short Circuit - Test
3126B Engine for Caterpillar Built Machines
CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 1589 FMI 04 Turbo Inlet Air Pressure Sensor short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0544 FMI 08 Engine Cooling Fan Speed signal abnormal
3126B Engine for Caterpillar Built Machines
Engine Fan Speed Sensor Circuit - Test
3126B Engine for Caterpillar Built Machines
Analog Sensor Supply Circuit - Test
3126B Engine for Caterpillar Built Machines
Injection Actuation Pressure Sensor - Test
3126B Engine for Caterpillar Built Machines
Service Magazine
Coolant Level Sensor Installation Service Notes {5574}
2008/07/14
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28

Caterpillar Parts SIS Catalog 561N :

SENSOR GP-TEMPERATURE
204-0320 SENSOR GP-TEMPERATURE
SENSOR GP-TEMPERATURE
197-8392 SENSOR GP-TEMPERATURE
SENSOR GP-TEMPERATURE
197-8391 SENSOR GP-TEMPERATURE
SENSOR GP-TEMPERATURE
191-6587 SENSOR GP-TEMPERATURE
SENSOR GP-TEMPERATURE
191-6587 SENSOR GP-TEMPERATURE
SENSOR GP-TEMPERATURE
145-7028 SENSOR GP-TEMPERATURE
SENSOR GP-TEMPERATURE
118-7226 SENSOR GP-TEMPERATURE
SENSOR GP-SPEED
318-1181 SENSOR GP-SPEED
SENSOR GP-TEMPERATURE
274-7396 SENSOR GP-TEMPERATURE
SERVICE GP-POWER TRAIN
236-5453 SERVICE GP-POWER TRAIN
STARTING AID GP
230-2530 STARTING AID GP
STARTING AID GP
230-2530 STARTING AID GP
STARTING MOTOR GP-ELECTRIC
145-5157 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
207-1519 STARTING MOTOR GP-ELECTRIC
SWITCH GP-DISCONNECT
7N-0718 SWITCH GP-DISCONNECT
SWITCH GP-MAGNETIC
125-1302 SWITCH GP-MAGNETIC

Truck sale:

2008 CAT 561N
USD $125,000 
2008 CAT 561N

Clark Heavy Equipment
Pleasureville, Kentucky
2006 CAT 561N
Call 
2006 CAT 561N

Clark Heavy Equipment
Pleasureville, Kentucky
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.