AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

235-6786 WIRING GP-ENGINE S/N TAD1-UP; CPH122-UP PART OF 198-6935 ELECTRICAL AR Type 2 561N PIPELAYER


ELECTRICAL AND STARTING SYSTEM
WIRING GP
POWER TRAIN
CONTROL GP-TRANSMISSION HYD

PIPELAYER 561N PIPELAYER CPH
 561N Pipelayer CPH00001-UP (MACHINE) POWERED BY 3126B Engine SEBP3656 561N CPH   (2003)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-ENGINE
235-6786 WIRING GP-ENGINE
WIRING GP-ENGINE
235-6786 WIRING GP-ENGINE
WIRING GP-ENGINE
235-6786 WIRING GP-ENGINE
WIRING GP-PLATFORM
156-7378 WIRING GP-PLATFORM
WIRING GP-PLATFORM
237-4485 WIRING GP-PLATFORM
WIRING GP-PLATFORM
237-4485 WIRING GP-PLATFORM
 

#SEBP36560240
 

235-6786: WIRING GP-ENGINE

235-6786 WIRING GP-ENGINE
S/N TAD1-UP; CPH122-UP
PART OF 198-6935 ELECTRICAL AR
Type 2
i06925212 SEBP3656
2356786 WIRING GP-ENGINE Parts scheme 2356786 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 561N PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3V-0778 [1] BRACKET  
2. 7K-1181 [26] STRAP-CABLE  
3. 116-0118 [1] CLIP  
4. 121-2844 [1] HARNESS AS-WIRING (CRANK WITHOUT INJECT)  
  8T-8729 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS,WEDGES & INTERFACE SEAL)
  8T-8737 [5] PLUG-SEAL  
  102-8803 [2] KIT-RECEPTACLE (3-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
  3E-3371 [2] WEDGE-RECEPTACLE LOCK (3-PIN)  
5. 141-3983 [1] SPACER (11X19X48-MM THK)  
6. 145-7028 Y [1] SENSOR GP-TEMPERATURE (POWER TRAIN OIL)  
7. 164-3651 [1] ADAPTER  
8. 193-2550 Y [1] SENSOR GP-SPEED (MAGNETIC, HIGH OUTPUT)(TRANSMISSION INPUT)  
9. 195-3783 [1] PLATE AS  
10. 195-7900 [1] WIRE AS  
11. 230-2204 [1] SPACER (13.2X17.75X100-MM THK)  
12. 241-3151 [1] PLATE  
13. 265-2733 Y [1] HARNESS AS-ENGINE (ALTERNATOR)  
14. 318-1181 CY [1] SENSOR GP-SPEED (MAGNETIC)(ENGINE)  
15. 096-5866 M [2] BOLT (M8X1.25X75-MM)  
16. 129-3178 M [1] LOCKNUT (M6X1-THD)  
17. 189-8772 [1] SPACER (11X16X35-MM THK)  
18. 1S-0994 [2] CLIP (LOOP)  
19. 3J-1907 [1] SEAL-O-RING  
20. 3S-8664 [1] CLIP (LOOP)  
21. 4P-7428 [2] CLIP (LADDER)  
22. 4P-7581 [9] CLIP (LADDER)  
23. 4P-8134 [8] CLIP (LADDER)  
24. 5C-7261 M [2] NUT (M8X1.25-THD)  
25. 5P-9085 [1] CLIP (LOOP)  
26. 7J-0204 [1] SEAL-O-RING  
27. 7X-2540 M [1] BOLT (M8X1.25X120-MM)  
28. 8M-2770 [1] CLIP (LOOP)  
29. 8T-4121 [5] WASHER-HARD (11X21X2.5-MM THK)  
30. 8T-4133 M [3] NUT (M10X1.5-THD)  
31. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
32. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
33. 8T-4177 M [1] BOLT (M8X1.25X90-MM)  
34. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
35. 8T-4192 M [1] BOLT (M12X1.75X25-MM)  
36. 8T-4200 M [2] BOLT (M8X1.25X16-MM)  
37. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
38. 8T-4224 [14] WASHER-HARD (8.8X16X2-MM THK)  
39. 8T-6869 M [1] BOLT (M8X1.25X60-MM)  
40. 8T-7934 [1] WASHER-HARD (11X21X5-MM THK)  
41. 9M-8406 [1] CLIP (LOOP)  
42. 9X-8256 [1] WASHER (6.6X12X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36560241
 

156-7378: WIRING GP-PLATFORM

156-7378 WIRING GP-PLATFORM
S/N CPH1-107
PART OF 204-0628 PLATFORM GP-OPERATOR
i01474451 SEBP3656
1567378 WIRING GP-PLATFORM Parts scheme
  For full view, you need register

Parts for your 561N PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-6328 Y [1] ALARM GP (24-VOLT)(ACTION)  
2. 7K-1181 [54] STRAP-CABLE  
3. 9M-9812 [1] WIRE AS  
4. 117-2311 [1] SOCKET-AUXILIARY POWER (12-VOLT)  
5. 135-2172 [2] PLATE  
6. 149-9818 [1] PLATE  
7. 156-8378 Y [1] PANEL GP-CIRCUIT BREAKER  
8. 169-2876 [1] FILM-IDENTIFICATION (POWER RECEPTACLE, 12-VOLT)  
9. 173-1566 [1] CAP AS  
  5P-5677 BD WIRE (18-GA, BLACK)  
  2L-8077 [1] TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)  
  125-7875 BE TUBE-HEAT SHRINK (7.44-MM DIA)  
  155-2262 [1] WEDGE-PLUG LOCK (4-PIN)  
  155-2272 [1] PLUG AS-CONNECTOR (4-PIN)  
10. 176-0238 [1] GROMMET-RUBBER  
11. 209-0381 [1] CONVERTER-POWER (24-VOLT TO 12-VOLT)  
12. 213-2983 [1] HARNESS AS-PLATFORM  
  110-6845 [2] PLUG AS-CONNECTOR (40-PIN)  
  4W-4293 [1] PLUG AS-CONNECTOR (17-PIN)  
  155-2272 [3] PLUG AS-CONNECTOR (4-PIN)  
  155-2270 [12] KIT-CONNECTING PLUG (2-PIN)  
  103-0213 [1] RECEPTACLE AS-CONNECTOR (70-PIN)  
  113-4630 [1] RECEPTACLE AS-CONNECTOR (4-PIN)  
  102-8802 [4] KIT-RECEPTACLE (2-PIN)  
  102-8804 [2] KIT-RECEPTACLE (4-PIN)  
  102-8805 [3] KIT-RECEPTACLE (6-PIN)  
  102-8806 [2] KIT-RECEPTACLE (8-PIN)  
  102-8801 [3] KIT-RECEPTACLE (12-PIN)  
  190-7614 [1] KIT-RECEPTACLE (12-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
  155-2255 [2] KIT-CONNECTING PLUG (12-PIN)  
  155-2265 [1] KIT-CONNECTING PLUG (8-PIN)  
  155-2260 [2] KIT-CONNECTING PLUG (3-PIN)  
  155-2274 [5] KIT-CONNECTING PLUG (6-PIN)  
    (EACH INCLUDES PLUG AS & WEDGE)
13. 213-2989 [1] PLATE  
14. 232-7305 [2] CLIP  
15. 095-0913 [2] CLIP  
16. 141-4976 [8] SCREW-WASHER HEAD (4-40X0.5-IN)  
17. 180-4523 [1] SWITCH AS-ROCKER (THROTTLE)  
  3E-8825 [2] LAMP (24-VOLT)  
  180-4524 [1] ACTUATOR  
18. 1S-0994 [2] CLIP (LOOP)  
19. 2G-1133 [1] GROMMET  
20. 4P-7581 [1] CLIP (LADDER)  
21. 4P-8134 [1] CLIP (LADDER)  
22. 6V-9672 M [4] SCREW-MACHINE (M4X0.7X16-MM)  
23. 7I-2272 M [6] BOLT (M5X0.8X12-MM)  
24. 7X-2543 M [2] BOLT (M10X1.5X120-MM)  
25. 8T-0328 [6] WASHER-HARD (5.5X10X1-MM THK)  
26. 8T-4121 [12] WASHER-HARD (11X21X2.5-MM THK)  
27. 8T-4133 M [1] NUT (M10X1.5-THD)  
28. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
29. 8T-4191 M [5] BOLT (M10X1.5X16-MM)  
30. 9X-2044 M [3] SCREW-TRUSS HEAD (M6X1X16-MM)  
31. 9X-7345 [1] GROMMET  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36560242
 

237-4485: WIRING GP-PLATFORM

237-4485 WIRING GP-PLATFORM
S/N CPH115-125
PART OF 204-0628 PLATFORM GP-OPERATOR
i02067574 SEBP3656
2374485 WIRING GP-PLATFORM Parts scheme
  For full view, you need register

Parts for your 561N PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-6328 Y [1] ALARM GP (24-VOLT)(ACTION)  
2. 7K-1181 [60] STRAP-CABLE  
3. 9M-9812 [1] WIRE AS  
4. 117-2311 [1] SOCKET-AUXILIARY POWER (12-VOLT)  
5. 135-2172 [2] PLATE  
6. 149-9818 [1] PLATE  
7. 169-2876 [1] FILM-IDENTIFICATION (POWER RECEPTACLE, 12-VOLT)  
8. 173-1566 [1] CAP AS (DATA LINK, MONITOR SERVICE)  
  5P-5677 BD WIRE (18-GA, BLACK)  
  8C-6354 [1] CAP-RECEPTACLE (ET CONNECTOR)(DATA LINK)  
  125-7875 BE TUBE-HEAT SHRINK (7.44-MM DIA)  
  2L-8077 [1] TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
    (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
9. 189-3158 [2] SUPPRESSOR-ARC  
10. 209-0381 [1] CONVERTER-POWER (24-VOLT TO 12-VOLT)  
11. 213-2989 [1] PLATE  
12. 222-7877 [1] SWITCH AS-ROCKER (24-VOLT)(THROTTLE)  
13. 232-7305 [2] CLIP  
14. 240-7192 [1] RESISTOR AS (1500-OHM, 1-WATT)  
15. 240-7193 [1] RESISTOR AS (500-OHM, 2-WATT)  
    (EACH RESISTOR AS INCLUDES)
  186-3735 [1] PIN-CONNECTOR (16-GA TO 18-GA)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
    (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
16. 248-5667 CY [1] PANEL GP-CIRCUIT BREAKER  
17. 248-5669 C [1] HARNESS AS-PLATFORM  
  9X-0194 [2] TERMINAL AS  
  102-8802 [3] KIT-RECEPTACLE (2-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
  102-8805 [4] KIT-RECEPTACLE (6-PIN)  
  102-8806 [3] KIT-RECEPTACLE (8-PIN)  
  102-8801 [4] KIT-RECEPTACLE (12-PIN)  
  190-7614 [1] KIT-RECEPTACLE (12-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
  110-6845 [2] PLUG AS-CONNECTOR (40-PIN)  
  4W-4293 [1] PLUG AS-CONNECTOR (17-PIN)  
  155-2252 [3] PLUG AS-CONNECTOR (12-PIN)  
  155-2272 [5] PLUG AS-CONNECTOR (4-PIN)  
  103-0213 [1] RECEPTACLE AS-CONNECTOR (70-PIN)  
  113-4630 [1] RECEPTACLE AS-CONNECTOR (4-PIN)  
  155-2265 [2] KIT-CONNECTING PLUG (8-PIN)  
  155-2260 [3] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [16] KIT-CONNECTING PLUG (2-PIN)  
  155-2274 [6] KIT-CONNECTING PLUG (6-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
18. 249-5052 C [1] GROMMET  
19. 141-4976 [8] SCREW-WASHER HEAD (4-40X0.5-IN)  
20. 145-8428 [1] COIL AS-DETENT  
  6V-2689 BD TUBE-HEAT SHRINK (6.35-MM DIA)  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
21. 1S-0994 [2] CLIP (LOOP)  
22. 4P-7581 [1] CLIP (LADDER)  
23. 4P-8134 [1] CLIP (LADDER)  
24. 4S-1962 [2] CLIP (LOOP)  
25. 6V-9672 M [4] SCREW-MACHINE (M4X0.7X16-MM)  
26. 7I-2272 M [6] BOLT (M5X0.8X12-MM)  
27. 7X-2543 M [2] BOLT (M10X1.5X120-MM)  
28. 8T-0328 [6] WASHER-HARD (5.5X10X1-MM THK)  
29. 8T-4121 [13] WASHER-HARD (11X21X2.5-MM THK)  
30. 8T-4133 M [1] NUT (M10X1.5-THD)  
31. 8T-4136 CM [1] BOLT (M10X1.5X25-MM)  
32. 8T-4137 M [5] BOLT (M10X1.5X20-MM)  
33. 8T-4191 CM [4] BOLT (M10X1.5X16-MM)  
34. 9X-2044 M [3] SCREW-TRUSS HEAD (M6X1X16-MM)  
35. 5P-9085 [1] CLIP (LOOP)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36560243
 

237-4485: WIRING GP-PLATFORM

237-4485 WIRING GP-PLATFORM
S/N TAD1-UP; CPH126-UP
PART OF 204-0628 PLATFORM GP-OPERATOR
i02470507 SEBP3656
2374485 WIRING GP-PLATFORM Parts scheme
  For full view, you need register

Parts for your 561N PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-6328 Y [1] ALARM GP (24-VOLT)(ACTION)  
2. 7K-1181 C [62] STRAP-CABLE  
3. 9M-9812 [1] WIRE AS  
4. 117-2311 [1] SOCKET-AUXILIARY POWER (12-VOLT)  
5. 135-2172 [2] PLATE  
6. 149-9818 [1] PLATE  
7. 169-2876 [1] FILM-IDENTIFICATION (POWER RECEPTACLE, 12-VOLT)  
8. 173-1566 [1] CAP AS (DATA LINK, MONITOR SERVICE)  
  5P-5677 D WIRE (18-GA, BLACK)(0.6-M)  
  8C-6354 [1] CAP-RECEPTACLE (ET CONNECTOR)(DATA LINK)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(6-CM)  
  2L-8077 [1] TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
    (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
9. 189-3158 [2] SUPPRESSOR-ARC  
10. 209-0381 [1] CONVERTER-POWER (24-VOLT TO 12-VOLT)  
11. 213-2989 [1] PLATE  
12. 222-7877 [1] SWITCH AS-ROCKER (24-VOLT)(THROTTLE)  
13. 232-7305 [2] CLIP  
14. 240-7192 [1] RESISTOR AS (1500-OHM, 1-WATT)  
15. 240-7193 [1] RESISTOR AS (500-OHM, 2-WATT)  
    (EACH RESISTOR AS INCLUDES)
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
16. 275-8263 CY [1] PANEL GP-CIRCUIT BREAKER  
17. 275-8262 C [1] HARNESS AS-PLATFORM  
  9X-0194 [2] TERMINAL AS  
  102-8801 [4] KIT-RECEPTACLE (12-PIN)  
  102-8802 [3] KIT-RECEPTACLE (2-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
  102-8805 [4] KIT-RECEPTACLE (6-PIN)  
  102-8806 [3] KIT-RECEPTACLE (8-PIN)  
  190-7614 [1] KIT-RECEPTACLE (12-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
  103-0213 [1] RECEPTACLE AS-CONNECTOR (70-PIN)  
  113-4630 [1] RECEPTACLE AS-CONNECTOR (4-PIN)  
  9W-1951 [1] RECEPTACLE-CONNECTOR (9-PIN)  
  155-2255 [3] KIT-CONNECTING PLUG (12-PIN)  
  155-2265 [2] KIT-CONNECTING PLUG (8-PIN)  
  155-2260 [3] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [16] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [5] KIT-CONNECTING PLUG (4-PIN)  
  155-2274 [6] KIT-CONNECTING PLUG (6-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
  4W-4293 [1] PLUG AS-CONNECTOR (17-PIN)  
  110-6845 [1] PLUG AS-CONNECTOR (40-PIN)  
  167-3693 [1] PLUG AS-CONNECTOR (31-PIN)  
  8T-9471 [1] GROMMET  
  7K-1181 [2] STRAP-CABLE  
18. 249-5052 [1] GROMMET  
19. 141-4976 [8] SCREW-WASHER HEAD (4-40X0.5-IN)  
20. 8S-0948 [1] CLIP  
21. 1S-0994 [2] CLIP (LOOP)  
22. 4P-7581 [1] CLIP (LADDER)(LADDER)  
23. 4P-8134 [1] CLIP (LADDER)(LADDER)  
24. 4S-1962 [1] CLIP (LOOP)  
25. 6V-9672 M [4] SCREW-MACHINE (M4X0.7X16-MM)  
26. 7I-2272 M [6] BOLT (M5X0.8X12-MM)  
27. 7X-2543 M [2] BOLT (M10X1.5X120-MM)  
28. 8T-0328 [6] WASHER-HARD (5.5X10X1-MM THK)  
29. 8T-4121 [13] WASHER-HARD (11X21X2.5-MM THK)  
30. 8T-4133 M [1] NUT (M10X1.5-THD)  
31. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
32. 8T-4137 M [5] BOLT (M10X1.5X20-MM)  
33. 8T-4191 M [4] BOLT (M10X1.5X16-MM)  
34. 9X-2044 M [3] SCREW-TRUSS HEAD (M6X1X16-MM)  
35. 5P-9085 [1] CLIP (LOOP)  
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36560244
 

237-4491: WIRING GP-PLATFORM

237-4491 WIRING GP-PLATFORM
S/N CPH1-UP
PART OF 204-0628 PLATFORM GP-OPERATOR
i02066873 SEBP3656
2374491 WIRING GP-PLATFORM Parts scheme
  For full view, you need register

Parts for your 561N PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-6328 Y [1] ALARM GP (24-VOLT)(ACTION)  
2. 7K-1181 [59] STRAP-CABLE  
3. 9M-9812 [1] WIRE AS (GROUND)  
4. 117-2311 [1] SOCKET-AUXILIARY POWER (12-VOLT)  
5. 135-2172 [2] PLATE  
6. 149-9818 [1] PLATE  
7. 169-2876 [1] FILM-IDENTIFICATION (POWER RECEPTACLE, 12-VOLT)  
8. 173-1566 [1] CAP AS (DATA LINK, MONITOR SERVICE)  
  5P-5677 BD WIRE (18-GA, BLACK)  
  8C-6354 [1] CAP-RECEPTACLE (ET CONNECTOR)  
  125-7875 BE TUBE-HEAT SHRINK (7.44-MM DIA)  
  2L-8077 [1] TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)  
  155-2262 [1] WEDGE-PLUG LOCK (4-PIN)  
  155-2272 [1] PLUG AS-CONNECTOR (4-PIN)  
9. 176-0238 [1] GROMMET-RUBBER  
10. 189-3158 [1] SUPPRESSOR-ARC  
11. 209-0381 [1] CONVERTER-POWER (24-VOLT TO 12-VOLT)  
12. 213-2989 [1] PLATE  
13. 222-7877 [1] SWITCH AS-ROCKER (24-VOLT)(THROTTLE)  
14. 232-7305 [2] CLIP  
15. 234-2789 Y [1] PANEL GP-CIRCUIT BREAKER  
16. [1] HARNESS AS-PLATFORM  
  103-0213 [1] RECEPTACLE AS-CONNECTOR (70-PIN)  
  113-4630 [1] RECEPTACLE AS-CONNECTOR (4-PIN)  
  190-7614 [1] KIT-RECEPTACLE (12-PIN)  
  102-8802 [3] KIT-RECEPTACLE (2-PIN)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
  102-8805 [3] KIT-RECEPTACLE (6-PIN)  
  102-8806 [2] KIT-RECEPTACLE (8-PIN)  
  102-8801 [3] KIT-RECEPTACLE (12-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
  110-6845 [2] PLUG AS-CONNECTOR (40-PIN)  
  4W-4293 [1] PLUG AS-CONNECTOR (17-PIN)  
  155-2272 [2] PLUG AS-CONNECTOR (4-PIN)  
  155-2255 [2] KIT-CONNECTING PLUG (12-PIN)  
  155-2265 [1] KIT-CONNECTING PLUG (8-PIN)  
  155-2260 [2] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [14] KIT-CONNECTING PLUG (2-PIN)  
  155-2274 [5] KIT-CONNECTING PLUG (6-PIN)  
    (EACH INCLUDES PLUG AS & WEDGE)
  9X-0194 [2] TERMINAL AS  
17. 240-7192 [1] RESISTOR AS (1500-OHM, 1-WATT)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
18. 240-7193 [1] RESISTOR AS (500-OHM, 2-WATT)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  186-3735 [1] PIN-CONNECTOR (16-GA TO 18-GA)  
19. 141-4976 [8] SCREW-WASHER HEAD (4-40X0.5-IN)  
20. 1S-0994 [2] CLIP (LOOP)  
21. 4P-7581 [1] CLIP (LADDER)  
22. 4P-8134 [1] CLIP (LADDER)  
23. 4S-1962 [2] CLIP (LOOP)  
24. 6V-9672 M [4] SCREW-MACHINE (M4X0.7X16-MM)  
25. 7I-2272 M [6] BOLT (M5X0.8X12-MM)  
26. 7X-2543 M [2] BOLT (M10X1.5X120-MM)  
27. 8T-0328 [6] WASHER-HARD (5.5X10X1-MM THK)  
28. 8T-4121 [12] WASHER-HARD (11X21X2.5-MM THK)  
29. 8T-4133 M [1] NUT (M10X1.5-THD)  
30. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
31. 8T-4191 M [5] BOLT (M10X1.5X16-MM)  
32. 9X-2044 M [3] SCREW-TRUSS HEAD (M6X1X16-MM)  
33. 9X-7345 [1] GROMMET  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36560245
 

237-4491: WIRING GP-PLATFORM

237-4491 WIRING GP-PLATFORM
S/N CPH108-114
PART OF 204-0628 PLATFORM GP-OPERATOR
i02114265 SEBP3656
2374491 WIRING GP-PLATFORM Parts scheme
  For full view, you need register

Parts for your 561N PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-6328 Y [1] ALARM GP (24-VOLT)(ACTION)  
2. 7K-1181 C [60] STRAP-CABLE  
3. 9M-9812 [1] WIRE AS (GROUND)  
4. 117-2311 [1] SOCKET-AUXILIARY POWER (12-VOLT)  
5. 135-2172 [2] PLATE  
6. 149-9818 [1] PLATE  
7. 169-2876 [1] FILM-IDENTIFICATION (POWER RECEPTACLE, 12-VOLT)  
8. 173-1566 [1] CAP AS (DATA LINK, MONITOR SERVICE)  
  5P-5677 BD WIRE (18-GA, BLACK)  
  8C-6354 [1] CAP-RECEPTACLE (ET CONNECTOR)  
  125-7875 BE TUBE-HEAT SHRINK (7.44-MM DIA)  
  2L-8077 [1] TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)  
  155-2262 [1] WEDGE-PLUG LOCK (4-PIN)  
  155-2272 [1] PLUG AS-CONNECTOR (4-PIN)  
9. 249-5052 C [1] GROMMET  
10. 189-3158 [1] SUPPRESSOR-ARC  
11. 209-0381 [1] CONVERTER-POWER (24-VOLT TO 12-VOLT)  
12. 213-2989 [1] PLATE  
13. 222-7877 [1] SWITCH AS-ROCKER (24-VOLT)(THROTTLE)  
14. 232-7305 [2] CLIP  
15. 234-2789 Y [1] PANEL GP-CIRCUIT BREAKER  
16. 248-5671 C [1] HARNESS AS-PLATFORM  
  103-0213 [1] RECEPTACLE AS-CONNECTOR (70-PIN)  
  113-4630 [1] RECEPTACLE AS-CONNECTOR (4-PIN)  
  190-7614 [1] KIT-RECEPTACLE (12-PIN)  
  102-8802 [3] KIT-RECEPTACLE (2-PIN)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
  102-8805 [3] KIT-RECEPTACLE (6-PIN)  
  102-8806 [2] KIT-RECEPTACLE (8-PIN)  
  102-8801 [3] KIT-RECEPTACLE (12-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
  110-6845 [2] PLUG AS-CONNECTOR (40-PIN)  
  4W-4293 [1] PLUG AS-CONNECTOR (17-PIN)  
  155-2272 [2] PLUG AS-CONNECTOR (4-PIN)  
  155-2255 [2] KIT-CONNECTING PLUG (12-PIN)  
  155-2265 [1] KIT-CONNECTING PLUG (8-PIN)  
  155-2260 [2] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [14] KIT-CONNECTING PLUG (2-PIN)  
  155-2274 [5] KIT-CONNECTING PLUG (6-PIN)  
    (EACH INCLUDES PLUG AS & WEDGE)
  9X-0194 [2] TERMINAL AS  
17. 240-7192 [1] RESISTOR AS (1500-OHM, 1-WATT)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
18. 240-7193 [1] RESISTOR AS (500-OHM, 2-WATT)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  186-3735 [1] PIN-CONNECTOR (16-GA TO 18-GA)  
19. 141-4976 [8] SCREW-WASHER HEAD (4-40X0.5-IN)  
20. 1S-0994 [2] CLIP (LOOP)  
21. 4P-7581 [1] CLIP (LADDER)  
22. 4P-8134 [1] CLIP (LADDER)  
23. 4S-1962 [2] CLIP (LOOP)  
24. 6V-9672 M [4] SCREW-MACHINE (M4X0.7X16-MM)  
25. 7I-2272 M [6] BOLT (M5X0.8X12-MM)  
26. 7X-2543 M [2] BOLT (M10X1.5X120-MM)  
27. 8T-0328 [6] WASHER-HARD (5.5X10X1-MM THK)  
28. 8T-4121 [12] WASHER-HARD (11X21X2.5-MM THK)  
29. 8T-4133 M [1] NUT (M10X1.5-THD)  
30. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
31. 8T-4191 M [5] BOLT (M10X1.5X16-MM)  
32. 9X-2044 M [3] SCREW-TRUSS HEAD (M6X1X16-MM)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36560246
 

256-1242: WIRING GP-PLATFORM

256-1242 WIRING GP-PLATFORM
S/N TAD1-UP; CPH1-UP
PART OF 217-0116 CONTROL AR-PEDAL
AN ATTACHMENT
i02221275 SEBP3656
2561242 WIRING GP-PLATFORM Parts scheme
  For full view, you need register

Parts for your 561N PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [6] STRAP-CABLE  
2. 236-8916 [1] HARNESS AS-PLATFORM (PARKING BRAKE SWITCH)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
    (INCLUDES PLUG AS & WEDGE)
3. 257-9786 [1] HARNESS AS-PLATFORM (PEDAL, LH)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS & WEDGE)
  155-2272 [1] PLUG AS-CONNECTOR (4-PIN)  
 

#SEBP36560247
 

205-3603: CONTROL GP-TRANSMISSION HYD

205-3603 CONTROL GP-TRANSMISSION HYD
S/N SAS1-2408
PART OF 200-8643 TRANSMISSION AR
i01774015 SEBP3656
2053603 CONTROL GP-TRANSMISSION HYD Parts scheme
  For full view, you need register

Parts for your 561N PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [2] STRAP-CABLE  
2. 6Y-0775 [5] SLEEVE  
3. 104-6729 [1] RETAINER  
4. 104-6730 [1] GASKET  
5. 108-2097 [1] PLATE  
6. 110-2049 [2] SLEEVE  
7. 110-2860 [1] CLIP AS-CONNECTING  
8. 204-8982 [1] GROMMET  
9. 205-3602 Y [1] VALVE GP-RELIEF (TRANSMISSION CONTROL)  
10. 205-4626 [1] HARNESS AS-SOLENOID (TRANSMISSION)  
  3S-2093 [5] STRAP-CABLE  
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  6J-2419 [1] SEAL-O-RING  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS & WEDGE)
11. 220-4324 Y [5] VALVE GP-MODULATING (TRANSMISSION CLUTCH)  
12. 222-0894 [2] CLIP  
13. 223-6517 [1] HARNESS AS-SENSOR (TRANSMISSION OUTPUT SPEED)  
  3S-2093 [1] STRAP-CABLE  
  155-2270 [4] KIT-CONNECTING PLUG (2-PIN)  
  155-2265 [1] KIT-CONNECTING PLUG (8-PIN)  
    (EACH INCLUDES PLUG AS & WEDGE)
14. 0T-0102 [5] BOLT (3/8-16X0.625-IN)  
15. 1D-4540 [10] BOLT (5/16-18X2.75-IN)  
16. 5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
17. 6V-4365 [10] SEAL-O-RING  
18. 8M-4432 [4] SEAL-O-RING  
19. 8S-9191 [4] BOLT (3/8-16X4-IN)  
20. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
21. 9M-1974 [10] WASHER-HARD (8.8X16X2-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36560248
 

205-3603: CONTROL GP-TRANSMISSION HYD

205-3603 CONTROL GP-TRANSMISSION HYD
S/N SAS2409-5034
PART OF 200-8643 TRANSMISSION AR
i02041062 SEBP3656
2053603 CONTROL GP-TRANSMISSION HYD Parts scheme
  For full view, you need register

Parts for your 561N PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6Y-0775 [5] SLEEVE  
2. 104-6729 [1] RETAINER  
3. 104-6730 [1] GASKET  
4. 108-2097 [1] PLATE  
5. 110-2049 [2] SLEEVE  
6. 110-2860 [1] CLIP AS-CONNECTING  
7. 204-8982 [1] GROMMET  
8. 205-3602 Y [1] VALVE GP-RELIEF (TRANSMISSION CONTROL)  
9. 205-4626 [1] HARNESS AS-SOLENOID (TRANSMISSION)  
  4P-7581 [4] CLIP (LADDER)  
  3S-2093 [5] STRAP-CABLE  
  6J-2419 [1] SEAL-O-RING  
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
    (EACH INCLUDES PLUG AS & WEDGE)
10. 220-4324 Y [5] VALVE GP-MODULATING (TRANSMISSION CLUTCH)  
11. 242-6229 C [1] HARNESS AS-SENSOR (TRANSMISSION OUTPUT SPEED)  
  3S-2093 [1] STRAP-CABLE  
  4P-7581 [1] CLIP (LADDER)  
  155-2265 [1] KIT-CONNECTING PLUG (8-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (EACH INCLUDES PLUG AS & WEDGE)
12. 0T-0102 [5] BOLT (3/8-16X0.625-IN)  
13. 1D-4540 [10] BOLT (5/16-18X2.75-IN)  
14. 5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
15. 6V-4365 [10] SEAL-O-RING  
16. 8M-4432 [4] SEAL-O-RING  
17. 8S-9191 [4] BOLT (3/8-16X4-IN)  
18. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
19. 9M-1974 [10] WASHER-HARD (8.8X16X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36560249
 

205-3603: CONTROL GP-TRANSMISSION HYD

205-3603 CONTROL GP-TRANSMISSION HYD
S/N DDE1-UP; SAS5035-UP
PART OF 200-8643 TRANSMISSION AR
i02630103 SEBP3656
2053603 CONTROL GP-TRANSMISSION HYD Parts scheme
  For full view, you need register

Parts for your 561N PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6Y-0775 [5] SLEEVE  
2. 104-6729 [1] RETAINER  
3. 104-6730 [1] GASKET  
4. 108-2097 [1] PLATE  
5. 110-2049 [2] SLEEVE  
6. 110-2860 [1] CLIP AS-CONNECTING  
7. 204-8982 [1] GROMMET  
8. 205-3602 Y [1] VALVE GP-RELIEF (MAIN)  
9. 220-4324 Y [5] VALVE GP-MODULATING (TRANSMISSION CLUTCH)  
10. 278-4563 C [1] HARNESS AS-TRANSMISSION  
  3S-2093 [5] STRAP-CABLE  
  4P-7581 [5] CLIP (LADDER)  
  155-2270 [7] KIT-CONNECTING PLUG (2-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
11. 0T-0102 [5] BOLT (3/8-16X0.625-IN)  
12. 1D-4540 [10] BOLT (5/16-18X2.75-IN)  
13. 5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
14. 6V-4365 [10] SEAL-O-RING  
15. 8M-4432 [4] SEAL-O-RING  
16. 8S-9191 [4] BOLT (3/8-16X4-IN)  
17. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
18. 9M-1974 [10] WASHER-HARD (8.8X16X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Specifications
Electronic Control Wiring Group
3126B Engine for Caterpillar Built Machines
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Troubleshooting
CID 0168 FMI 02 System Voltage intermittent/erratic
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0168 FMI 01 System Voltage Low
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0168 FMI 00 System Voltage High
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0291 FMI 05 Engine Cooling Fan Solenoid open circuit
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0291 FMI 06 Engine Cooling Fan Solenoid short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Electrical Connectors - Inspect
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
3126B Engine for Caterpillar Built Machines
CID 0100 FMI 04 Engine Oil Pressure short to ground
3126B Engine for Caterpillar Built Machines
CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0172 FMI 04 Intake Manifold Air Temp short to ground
3126B Engine for Caterpillar Built Machines
CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 0273 FMI 03 Turbo Outlet Pressure open/short to +batt
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 0273 FMI 04 Turbo Outlet Pressure short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0274 FMI 04 Atmospheric Pressure short to ground
3126B Engine for Caterpillar Built Machines
CID 0041 FMI 04 8 Volt DC Supply short to ground
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0248 FMI 09 Cat Data Link not communicating
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0091 FMI 08 Throttle Position signal abnormal
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0548 FMI 06 Throttle Lock Lamp short
3126B Engine for Caterpillar Built Machines
CID 0548 FMI 05 Throttle Lock Lamp open circuit
3126B Engine for Caterpillar Built Machines
CID 0042 FMI 11 Inject Actuation Control Valve open/short
3126B Engine for Caterpillar Built Machines
CID 0094 FMI 03 Fuel Pressure open/short to +batt
3126B Engine for Caterpillar Built Machines
CID 0094 FMI 04 Fuel Pressure short to ground
3126B Engine for Caterpillar Built Machines
CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
3126B Engine for Caterpillar Built Machines
CID 0110 FMI 04 Engine Coolant Temperature short to ground
3126B Engine for Caterpillar Built Machines
CID 0164 FMI 00 High Injector Actuation Pressure
3126B Engine for Caterpillar Built Machines
CID 0164 FMI 03 Injector Actuation Pressure voltage high
3126B Engine for Caterpillar Built Machines
CID 0175 FMI 03 Engine Oil Temperature open/short to +batt
3126B Engine for Caterpillar Built Machines
CID 0175 FMI 04 Engine Oil Temperature short to ground
3126B Engine for Caterpillar Built Machines
CID 0267 FMI 02 Incorrect Engine Shutdown Switch inputs
3126B Engine for Caterpillar Built Machines
CID 0600 FMI 03 Hydraulic Oil Temperature open/short to +batt
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0600 FMI 04 Hydraulic Oil Temperature short to ground
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0041 FMI 03 8 Volt DC Supply short to +batt
3126B Engine for Caterpillar Built Machines
How To Use the Functional Tests
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Sensors and Electrical Connectors
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 0091 FMI 08 Throttle Position signal abnormal
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 0164 FMI 11 Injector Actuation Pressure system fault
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 0190 FMI 02 Loss of Engine Speed Signal
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0190 FMI 11 Engine Speed Sensor mechanical failure
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0617 FMI 05 Air Inlet Heater Relay open/current below normal
3126B Engine for Caterpillar Built Machines
CID 1627 FMI 05 Fuel Pump Relay open circuit
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 1627 FMI 06 Fuel Pump Relay short to ground
3126B Engine for Caterpillar Built Machines
5 Volt Engine Pressure Sensor Supply Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Cat Data Link Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Engine Speed/Timing Sensor Circuit - Test
3126B Engine for Caterpillar Built Machines
Injection Actuation Pressure Control Valve Circuit - Test
3126B Engine for Caterpillar Built Machines
Throttle Switch Circuit - Test
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
Low Engine Oil Pressure Lamp Circuit - Test
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
Air Inlet Heater Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Throttle Position Sensor Circuit - Test
3126B Engine for Caterpillar Built Machines
Digital Sensor Supply Circuit - Test
3126B Engine for Caterpillar Built Machines
Electrical Power Supply Circuit - Test
3126B Engine for Caterpillar Built Machines
CID 0290 FMI 03 Engine Fan Pump Pressure open/short to +batt
3126B Engine for Caterpillar Built Machines
CID 0290 FMI 04 Engine Fan Pump Pressure short to ground
3126B Engine for Caterpillar Built Machines
Engine Fan Control Solenoid Circuit - Test
3126B Engine for Caterpillar Built Machines
Throttle Lock Switch Circuit - Test
3126B Engine for Caterpillar Built Machines
Throttle Lock Lamp Circuit - Test
3126B Engine for Caterpillar Built Machines
Digital Sensor Supply Circuit - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Throttle Position Sensor Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Electrical Power Supply Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Fuel Pump Relay Circuit - Test
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 1582 FMI 03 Trans Lube Oil Temp Sensor open/short to +batt
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 1582 FMI 04 Trans Lube Oil Temp Sensor short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 1589 FMI 03 Turbo Inlet Air Pressure Sensor open/shrt to +bat
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Air Filter Restriction Lamp - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Engine Shutdown Switch Circuit - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Engine Fan Control Solenoid Circuit - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0617 FMI 05 Air Inlet Heater Relay open/current below normal
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0617 FMI 06 Air Inlet Heater Relay grounded/current above norm
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Sensors and Electrical Connectors
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0342 FMI 03 Secondary Engine Speed open/short to +batt
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Engine Shutdown Switch Circuit - Test
3126B Engine for Caterpillar Built Machines
Engine Fan Reversing Solenoid Circuit - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0164 FMI 02 Injector Actuation Pressure signal erratic
3126B Engine for Caterpillar Built Machines
CID 0342 FMI 02 Loss of Secondary Engine Speed signal
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0091 FMI 02 Incorrect Throttle Switch inputs
3126B Engine for Caterpillar Built Machines
Air Inlet Heater Circuit - Test
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 0164 FMI 04 Injector Actuation Pressure voltage low
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
Engine Pressure Sensor Open or Short Circuit - Test
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 0342 FMI 11 Secondary Engine Speed Sensor mechanical failure
3126B Engine for Caterpillar Built Machines
Cat Data Link Circuit - Test
3126B Engine for Caterpillar Built Machines
Sensors and Electrical Connectors
3126B Engine for Caterpillar Built Machines
5 Volt Engine Pressure Sensor Supply Circuit - Test
3126B Engine for Caterpillar Built Machines
Engine Pressure Sensor Open or Short Circuit - Test
3126B Engine for Caterpillar Built Machines
Sensors and Electrical Connectors
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Analog Sensor Supply Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
3126B Engine for Caterpillar Built Machines
CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
3126B Engine for Caterpillar Built Machines
Sensors and Electrical Connectors
3126B Engine for Caterpillar Built Machines
Engine Pressure Sensor Open or Short Circuit - Test
3126B Engine for Caterpillar Built Machines
Throttle Switch Circuit - Test
3126B Engine for Caterpillar Built Machines
CID 0444 FMI 05 Start Relay open circuit
3126B Engine for Caterpillar Built Machines
CID 0444 FMI 06 Start Relay short to ground
3126B Engine for Caterpillar Built Machines
Start Relay Circuit - Test
3126B Engine for Caterpillar Built Machines
CID 0485 FMI 03 Engine Fan Rev Solenoid short to +batt
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0485 FMI 04 Engine Fan Rev Solenoid short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Engine Wiring Information
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 1589 FMI 04 Turbo Inlet Air Pressure Sensor short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0617 FMI 06 Air Inlet Heater Relay grounded/current above norm
3126B Engine for Caterpillar Built Machines
CID 0544 FMI 08 Engine Cooling Fan Speed signal abnormal
3126B Engine for Caterpillar Built Machines
CID 0291 FMI 12 Engine Cooling Fan Solenoid malfunction
3126B Engine for Caterpillar Built Machines
Engine Fan Speed Sensor Circuit - Test
3126B Engine for Caterpillar Built Machines
Engine Fan Control Solenoid Circuit - Test
3126B Engine for Caterpillar Built Machines
Service Magazine
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04
Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2012/03/05
Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08
Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Caterpillar Parts SIS Catalog 561N :

WIRING GP-ENGINE
235-6786 WIRING GP-ENGINE
WIRING GP-ENGINE
235-6786 WIRING GP-ENGINE
WIRING GP-ENGINE
228-5786 WIRING GP-ENGINE
WIRING GP-CHASSIS
235-4154 WIRING GP-CHASSIS
SWITCH GP-TOGGLE
165-5970 SWITCH GP-TOGGLE
SWITCH GP-PUSH BUTTON
158-6632 SWITCH GP-PUSH BUTTON
SWITCH GP-MAGNETIC
398-0940 SWITCH GP-MAGNETIC
SWITCH GP-MAGNETIC
241-8368 SWITCH GP-MAGNETIC
WIRING GP-PLATFORM
156-7378 WIRING GP-PLATFORM
WIRING GP-PLATFORM
237-4485 WIRING GP-PLATFORM
WIRING GP-PLATFORM
237-4485 WIRING GP-PLATFORM
WIRING GP-PLATFORM
237-4491 WIRING GP-PLATFORM
WIRING GP-PLATFORM
237-4491 WIRING GP-PLATFORM
WIRING GP-PLATFORM
256-1242 WIRING GP-PLATFORM
CONTROL GP-TRANSMISSION HYD
205-3603 CONTROL GP-TRANSMISSION HYD
CONTROL GP-TRANSMISSION HYD
205-3603 CONTROL GP-TRANSMISSION HYD

Truck sale:

2008 CAT 561N
USD $125,000 
2008 CAT 561N

Clark Heavy Equipment
Pleasureville, Kentucky
2006 CAT 561N
Call 
2006 CAT 561N

Clark Heavy Equipment
Pleasureville, Kentucky
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.