AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9G-7641 SWITCH GP-START -ENGINE, KEY S/N EGA1-UP PART OF 170-6910, 256-6493 WIRING GP-CONSOLE ALSO AN ATTACHMENT 320C


ELECTRICAL AND STARTING SYSTEM
SWITCH GP
WIRING GP

EXCAVATOR 320C EXCAVATOR EGA
 320C Hydraulic Material Handler EGA00001-UP (MACHINE) POWERED BY 3066 Engine SEBP3657 320C EGA   (2002)

ELECTRICAL AND STARTING SYSTEM

SWITCH GP
547-7976 SWITCH & WIRE GP-FUEL LEVEL
SWITCH GP-DISCONNECT
7N-0718 SWITCH GP-DISCONNECT
SWITCH GP-DISCONNECT
7N-0719 SWITCH GP-DISCONNECT
SWITCH GP-MAGNETIC
125-1302 SWITCH GP-MAGNETIC
SWITCH GP-MAGNETIC
259-5274 SWITCH GP-MAGNETIC
SWITCH GP-REFUELING
5C-6108 SWITCH GP-REFUELING
SWITCH GP-ROTARY
106-0107 SWITCH GP-ROTARY
SWITCH GP-START
9G-7641 SWITCH GP-START
 

#SEBP36570130
 

9G-7641: SWITCH GP-START

9G-7641 SWITCH GP-START -ENGINE, KEY
S/N EGA1-UP
PART OF 170-6910, 256-6493 WIRING GP-CONSOLE
ALSO AN ATTACHMENT
i00188049 SEBP3657
9G7641 SWITCH GP-START Parts scheme
  For full view, you need register

Parts for your 320C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8362 [4] SCREW-MACHINE (8-32X0.31-IN)  
2. 9B-7233 [4] LOCKWASHER  
3. 7T-6799 [1] NUT-MOUNTING (1-32-THD)  
   
  5P-8500 AF [1] KEY (IGNITION)  
  A   NOT PART OF THIS GROUP
  F   NOT SHOWN
 

#SEBP36570131
 

224-1113: WIRING GP-BOOM

224-1113 WIRING GP-BOOM -MEDIUM PRESSURE
S/N EGA1-UP
PART OF 222-4653 CONTROL AR-AUXILIARY
AN ATTACHMENT
i01795712 SEBP3657
2241113 WIRING GP-BOOM Parts scheme
  For full view, you need register

Parts for your 320C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 222-3491 [1] HARNESS AS-PLATFORM  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (EACH CONNECTING PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
2. 7K-1181 B [4] STRAP-CABLE  
3. 8T-4172 M [1] BOLT (M10X1.5X80-MM)  
4. 111-4837 [2] CLIP  
5. 3S-2093 B [30] STRAP-CABLE  
6. 8T-4171 M [2] BOLT (M6X1X12-MM)  
7. 149-5050 [3] RELAY (24-VOLT)(JOYSTICK, POWER SUPPLY, ROTATE)  
8. 5C-9553 M [1] BOLT (M6X1X16-MM)  
9. 224-4788 [1] HARNESS AS-PANEL (RELAY)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (EACH CONNECTING PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
10. 224-3834 [1] HARNESS AS-PANEL (RELAY)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
    (EACH CONNECTING PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
11. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
12. 4I-7889 [1] SPACER (11X25X45-MM THK)  
13. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP36570132
 

186-4638: WIRING GP-BOOM FLOAT

186-4638 WIRING GP-BOOM FLOAT -BOOM FLOAT
S/N EGA1-UP
PART OF 186-1228 CONTROL AR-AUXILIARY
AN ATTACHMENT
i01719912 SEBP3657
1864638 WIRING GP-BOOM FLOAT Parts scheme 1864638 WIRING GP-BOOM FLOAT Parts scheme 1864638 WIRING GP-BOOM FLOAT Parts scheme
  For full view, you need register

Parts for your 320C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 230-3388 [1] HARNESS AS-PANEL  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2270 [5] KIT-CONNECTING PLUG (2-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
2. 197-4408 [1] HARNESS AS-PANEL (SMARTBOOM)  
  155-2265 [1] KIT-CONNECTING PLUG (8-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
3. 7K-1181 [16] STRAP-CABLE  
4. 3S-2093 [10] STRAP-CABLE  
5. 7I-2673 [7] STRAP-CABLE  
6. 111-4836 [3] CLIP  
7. 8T-4196 M [2] BOLT (M10X1.5X35-MM)  
8. 149-5050 [2] RELAY (24-VOLT)  
9. 161-3128 [1] RELAY (24-VOLT)  
10. 186-4639 [1] SWITCH AS-ROCKER (SMARTBOOM)  
  167-3542 [1] RECEPTACLE-CONNECTOR (5-PIN)  
  167-3543 [5] TERMINAL (MALE)  
11. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
12. 8T-4121 [3] WASHER-HARD (11X21X2.5-MM THK)  
  M   METRIC PART
 

#SEBP36570133
 

184-7622: WIRING GP-CAB

184-7622 WIRING GP-CAB
S/N EGA1-UP
PART OF 211-7983, 217-5668 CAB GP
ALSO AN ATTACHMENT
i01394347 SEBP3657
1847622 WIRING GP-CAB Parts scheme
  For full view, you need register

Parts for your 320C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9W-1494 [1] KIT-SERVICE METER (24-VOLT)  
2. 9W-0335 [1] LIGHTER AS-CIGAR (24-VOLT)  
3. 4I-3064 E GUARD (10CM)  
4. 163-6795 [13] STRAP-CABLE  
5. 198-0857 [1] HARNESS AS (CAB)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  102-8802 [4] KIT-RECEPTACLE (2-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
  102-8806 [3] KIT-RECEPTACLE (8-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2265 [4] KIT-CONNECTING PLUG (8-PIN)  
  155-2270 [4] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
    (EACH CONNECTING PLUG KIT INCLUDES RECEPTACLE AS, WEDGE & INTERFACE SEAL)
6. 8T-6693 M [2] SCREW-MACHINE (M5X0.8X16-MM)  
7. 8T-0328 [6] WASHER-HARD (5.5X10X1-MM THK)  
8. 163-6810 [1] HARNESS AS-MONITOR  
9. 7Y-5226 M [2] NUT (M5X0.8-THD)  
10. 095-0736 M [2] SCREW-MACHINE (M5X0.8X10-MM)  
11. 096-5962 [2] WASHER-HARD (3.4X7X0.8-MM THK)  
12. 163-6701 [1] PANEL AS-CONTROL  
13. 132-1829 Y [1] ALARM GP (24-VOLT)(FAULT)  
14. 8T-4171 M [1] BOLT (M6X1X12-MM)  
15. 9X-8256 [1] WASHER (6.6X12X2-MM THK)  
16. 7K-1181 B [1] STRAP-CABLE  
17. 6V-9669 M [2] SCREW-MACHINE (M3X0.5X8-MM)  
18. 3C-6969 M [2] NUT (M3X0.5-THD)  
19. 3E-9872 M [1] SCREW AS (M4X0.7X12-MM)  
20. 111-4846 [1] CABLE  
21. 6C-3431 [1] ANTENNA  
22. 6C-9077 [1] WASHER  
23. 188-7681 [1] CONTROL GP-WIPER  
24. 5C-2874 M [2] NUT (M5X0.8-THD)  
25. 6C-9081 [2] LOCKWASHER  
26. 176-1919 [1] HARNESS AS-PANEL  
27. 157-3210 [1] PANEL AS-CONTROL  
28. 8T-0286 M [2] BOLT (M5X0.8X8-MM)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36570134
 

211-7989: WIRING GP-CAB

211-7989 WIRING GP-CAB -TILT CAB
S/N EGA1-UP
PART OF 211-7983, 236-6500, 245-1063 CAB GP
AN ATTACHMENT
i01810693 SEBP3657
2117989 WIRING GP-CAB Parts scheme
  For full view, you need register

Parts for your 320C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 219-6932 B [1] HARNESS AS-SWITCH  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  B   USE AS REQUIRED
 

#SEBP36570135
 

235-1748: WIRING GP-CAB

235-1748 WIRING GP-CAB -SEAT AIR COMPRESSOR, HEATER
S/N EGA1-UP
PART OF 235-1760 SUSPENSION GP-SEAT
AN ATTACHMENT
i02250245 SEBP3657
2351748 WIRING GP-CAB Parts scheme
  For full view, you need register

Parts for your 320C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 116-0118 [1] CLIP  
2. 9D-8508 [1] GROMMET  
3. 3S-2093 [13] STRAP-CABLE  
4. 236-2453 [1] HARNESS AS-CAB  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
 

#SEBP36570136
 

235-8317: WIRING GP-CAB

235-8317 WIRING GP-CAB
S/N EGA1-309
PART OF 235-8328, 235-8329, 236-6500, 239-0114, 239-0116, 245-1063 CAB GP
ALSO AN ATTACHMENT
i02174976 SEBP3657
2358317 WIRING GP-CAB Parts scheme
  For full view, you need register

Parts for your 320C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 161-3932 [1] METER GP-SERVICE  
2. 9W-0335 [1] LIGHTER AS-CIGAR (24-VOLT)  
3. 4I-3064 E GUARD (10CM)  
4. 163-6795 [13] STRAP-CABLE  
5. 233-1036 [1] HARNESS AS-CAB  
  102-8802 [3] KIT-RECEPTACLE (2-PIN)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
  102-8806 [3] KIT-RECEPTACLE (8-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2272 [1] PLUG AS-CONNECTOR (4-PIN)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2265 [4] KIT-CONNECTING PLUG (8-PIN)  
  155-2270 [4] KIT-CONNECTING PLUG (2-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
6. 8T-6693 M [2] SCREW-MACHINE (M5X0.8X16-MM)  
7. 8T-0328 [6] WASHER-HARD (5.5X10X1-MM THK)  
9. 7Y-5226 M [2] NUT (M5X0.8-THD)  
10. 095-0736 M [2] SCREW-MACHINE (M5X0.8X10-MM)  
11. 096-5962 [2] WASHER-HARD (3.4X7X0.8-MM THK)  
12. 163-6701 [1] PANEL AS-CONTROL  
13. 132-1829 Y [1] ALARM GP (24-VOLT)(FAULT)  
14. 8T-4171 M [1] BOLT (M6X1X12-MM)  
15. 9X-8256 [1] WASHER (6.6X12X2-MM THK)  
16. 7K-1181 B [1] STRAP-CABLE  
17. 6V-9669 M [2] SCREW-MACHINE (M3X0.5X8-MM)  
18. 3C-6969 M [2] NUT (M3X0.5-THD)  
19. 3E-9872 M [1] SCREW AS (M4X0.7X12-MM)  
20. 111-4846 [1] CABLE  
21. 6C-3431 [1] ANTENNA  
22. 6C-9077 [1] WASHER  
23. 188-7681 [1] CONTROL GP-WIPER  
24. 5C-2874 M [2] NUT (M5X0.8-THD)  
25. 6C-9081 [2] LOCKWASHER  
26. 176-1919 [1] HARNESS AS-PANEL  
27. 157-3210 [1] PANEL AS-CONTROL  
28. 8T-0286 M [2] BOLT (M5X0.8X8-MM)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36570137
 

235-8317: WIRING GP-CAB

235-8317 WIRING GP-CAB
S/N EGA310-UP
PART OF 235-8328, 235-8329, 239-0114, 239-0116, 245-1063 CAB GP
AN ATTACHMENT
i02605764 SEBP3657
2358317 WIRING GP-CAB Parts scheme
  For full view, you need register

Parts for your 320C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 268-1964 [1] KIT-SERVICE METER (STEERING CONSOLE)  
    (INCLUDES METER & FILM)
2. 9W-0335 [1] LIGHTER AS-CIGAR (24-VOLT)  
3. 4I-3064 E GUARD (10-CM)  
4. 163-6795 [13] STRAP-CABLE  
5. 268-7620 C [1] HARNESS AS-CAB  
  5P-6271 [1] CONNECTOR AS  
  3S-2093 [56] STRAP-CABLE  
  102-8802 [3] KIT-RECEPTACLE (2-PIN)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
  102-8806 [3] KIT-RECEPTACLE (8-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2265 [4] KIT-CONNECTING PLUG (8-PIN)  
  155-2270 [4] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
6. 8T-6693 M [2] SCREW-MACHINE (M5X0.8X16-MM)  
7. 8T-0328 [6] WASHER-HARD (5.5X10X1-MM THK)  
9. 7Y-5226 M [2] NUT (M5X0.8-THD)  
10. 095-0736 M [2] SCREW-MACHINE (M5X0.8X10-MM)  
11. 096-5962 [2] WASHER-HARD (3.4X7X0.8-MM THK)  
12. 163-6701 [1] PANEL AS-CONTROL  
13. 132-1829 Y [1] ALARM GP (24-VOLT)(FAULT)  
14. 8T-4171 M [1] BOLT (M6X1X12-MM)  
15. 9X-8256 [1] WASHER (6.6X12X2-MM THK)  
16. 7K-1181 B [1] STRAP-CABLE  
17. 6V-9669 M [2] SCREW-MACHINE (M3X0.5X8-MM)  
18. 3C-6969 M [2] NUT (M3X0.5-THD)  
19. 3E-9872 M [1] SCREW AS (M4X0.7X12-MM)  
20. 111-4846 [1] CABLE  
21. 6C-3431 [1] ANTENNA  
22. 6C-9077 [1] WASHER  
23. 328-0651 [1] CONTROL GP-WIPER  
24. 5C-2874 M [2] NUT (M5X0.8-THD)  
25. 6C-9081 [2] LOCKWASHER  
26. 176-1919 [1] HARNESS AS-PANEL  
27. 157-3210 [1] PANEL AS-CONTROL  
28. 8T-0286 M [2] BOLT (M5X0.8X8-MM)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36570138
 

220-3147: WIRING GP-CAB RISER

220-3147 WIRING GP-CAB RISER
S/N EGA1-UP
1200MM (47.24IN) CAB RISER
PART OF 219-7841 RISER AR-CAB
Type 1
AN ATTACHMENT
i01847365 SEBP3657
2203147 WIRING GP-CAB RISER Parts scheme 2203147 WIRING GP-CAB RISER Parts scheme
  For full view, you need register

Parts for your 320C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 163-6786 [1] BRACKET  
2. 8T-4195 CM [2] BOLT (M10X1.5X30-MM)  
3. 3S-2093 B [22] STRAP-CABLE  
4. 111-4838 [6] CLIP  
5. 8T-4121 C [14] WASHER-HARD (11X21X2.5-MM THK)  
6. 8T-4136 M [9] BOLT (M10X1.5X25-MM)  
7. 111-4839 [6] STRAP  
8. 8T-4191 M [2] BOLT (M10X1.5X16-MM)  
9. 221-1702 [1] HARNESS AS-PANEL (FUSE, RELAY)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
  102-8801 [2] KIT-RECEPTACLE (12-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2255 [2] KIT-CONNECTING PLUG (12-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS & WEDGE & INTERFACE SEAL)
10. 221-1704 [1] HARNESS AS  
11. 7G-1060 [1] STRAP AS-GROUND  
12. 8T-4133 CM [3] NUT (M10X1.5-THD)  
13. 6V-5683 M [4] BOLT (M6X1X16-MM)  
14. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
15. 8T-4186 CM [1] BOLT (M10X1.5X40-MM)  
16. 7Y-8171 [1] GROMMET  
17. 221-5174 [1] HARNESS AS-WIRING (JOYSTICK, PEDALS)  
  102-8804 [4] KIT-RECEPTACLE (4-PIN)  
  102-8805 [5] KIT-RECEPTACLE (6-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2271 [3] KIT-CONNECTING PLUG (4-PIN)  
  155-2274 [6] KIT-CONNECTING PLUG (6-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS & WEDGE & INTERFACE SEAL)
18. 221-5173 [1] HARNESS AS-WIRING (SMARTBOOM, FLOAT)  
  102-8803 [2] KIT-RECEPTACLE (3-PIN)  
  102-8804 [2] KIT-RECEPTACLE (4-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2260 [2] KIT-CONNECTING PLUG (3-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS & WEDGE & INTERFACE SEAL)
19. 111-4837 [5] CLIP  
20. 222-3494 [1] HARNESS AS-WIRING (SMARTBOOM)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    INCLUDES RECEPTACLE AS & WEDGE)
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS & WEDGE & INTERFACE SEAL)
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP36570139
 

220-3147: WIRING GP-CAB RISER

220-3147 WIRING GP-CAB RISER
S/N EGA1-UP
1200MM (47.24IN) CAB RISER
PART OF 219-7841 RISER AR-CAB
Type 2
AN ATTACHMENT
i02320851 SEBP3657
2203147 WIRING GP-CAB RISER Parts scheme 2203147 WIRING GP-CAB RISER Parts scheme
  For full view, you need register

Parts for your 320C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4196 M [1] BOLT (M10X1.5X35-MM)  
2. 214-7915 [1] FILM-INSTRUCTION (ENGINE SHUTOFF)  
3. 8T-4133 M [3] NUT (M10X1.5-THD)  
4. 111-4838 [6] CLIP  
5. 8T-4121 [16] WASHER-HARD (11X21X2.5-MM THK)  
6. 8T-4136 M [11] BOLT (M10X1.5X25-MM)  
7. 111-4839 [6] STRAP  
8. 8T-4191 M [2] BOLT (M10X1.5X16-MM)  
9. 221-1702 [1] HARNESS AS-PANEL (FUSE, RELAY)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
  102-8801 [2] KIT-RECEPTACLE (12-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2255 [2] KIT-CONNECTING PLUG (12-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  3S-2093 [3] STRAP-CABLE  
10. 234-4975 [1] HARNESS AS-PLATFORM (ENGINE, PUMP CONTROL)  
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
  102-8801 [3] KIT-RECEPTACLE (12-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2255 [3] KIT-CONNECTING PLUG (12-PIN)  
  155-2265 [1] KIT-CONNECTING PLUG (8-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  3S-2093 [5] STRAP-CABLE  
11. 7G-1060 [1] STRAP AS-GROUND  
12. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
13. 204-1771 [1] PLATE  
14. 3S-2093 B [22] STRAP-CABLE  
15. 222-3494 [1] HARNESS AS-WIRING (SMARTBOOM)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
16. 7Y-8171 [1] GROMMET  
17. 221-5174 [1] HARNESS AS-WIRING (JOYSTICK, PEDALS)  
  102-8804 [4] KIT-RECEPTACLE (4-PIN)  
  102-8805 [5] KIT-RECEPTACLE (6-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2271 [3] KIT-CONNECTING PLUG (4-PIN)  
  155-2274 [6] KIT-CONNECTING PLUG (6-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS & WEDGE & INTERFACE SEAL)
  3S-2093 [3] STRAP-CABLE  
18. 221-5173 [1] HARNESS AS-WIRING (SMARTBOOM, FLOAT)  
  102-8803 [2] KIT-RECEPTACLE (3-PIN)  
  102-8804 [2] KIT-RECEPTACLE (4-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
19. 111-4837 [6] CLIP  
20. 3E-5169 [1] GUARD-SWITCH  
21. 4D-1836 [1] SWITCH-TOGGLE (SECONDARY SHUTDOWN)  
  B   USE AS REQUIRED
  M   METRIC PART
 

Information:

Disassembly and Assembly
Coolant Temperature Switch - Remove and Install
3064 and 3066 Engines for Caterpillar Built Machines
Engine Oil Pressure Switch - Remove and Install
3064 and 3066 Engines for Caterpillar Built Machines
Service Magazine
An Improved 5P-8500 Key Is Now Available {1416, 1416, 7000, 7000}
2011/12/01

Caterpillar Parts SIS Catalog 320C :

SWITCH GP-ROTARY
106-0107 SWITCH GP-ROTARY
SWITCH GP-REFUELING
5C-6108 SWITCH GP-REFUELING
SWITCH GP-MAGNETIC
259-5274 SWITCH GP-MAGNETIC
SWITCH GP-MAGNETIC
125-1302 SWITCH GP-MAGNETIC
SWITCH GP-DISCONNECT
7N-0719 SWITCH GP-DISCONNECT
SWITCH GP-DISCONNECT
7N-0718 SWITCH GP-DISCONNECT
547-7976 SWITCH & WIRE GP-FUEL LEVEL
STARTING MOTOR GP-ELECTRIC
125-2988 STARTING MOTOR GP-ELECTRIC
WIRING GP-BOOM
224-1113 WIRING GP-BOOM
WIRING GP-BOOM FLOAT
186-4638 WIRING GP-BOOM FLOAT
WIRING GP-CAB
184-7622 WIRING GP-CAB
WIRING GP-CAB
211-7989 WIRING GP-CAB
WIRING GP-CAB
235-1748 WIRING GP-CAB
WIRING GP-CAB
235-8317 WIRING GP-CAB
WIRING GP-CAB
235-8317 WIRING GP-CAB
WIRING GP-CAB RISER
220-3147 WIRING GP-CAB RISER

Truck sale:

 
 
Caterpillar 320C
- Crawler Excavators
WESTERN STATES EQUIPMENT
 
288,000 
Caterpillar 320 CF, Crawler Excavators, Construction
- Crawler Excavators
WHEELER MACHINERY CO.
Caterpillar 320C, Crawler Excavators, Construction
45,597 
Caterpillar 320C, Crawler Excavators, Construction
- Crawler Excavators
FINNING CANADA
 
287,325 
Caterpillar 320 CF, Crawler Excavators, Construction
- Crawler Excavators
WHEELER MACHINERY CO.
 
287,325 
Caterpillar 320 CF, Crawler Excavators, Construction
- Crawler Excavators
WHEELER MACHINERY CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.