AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

179-9785 CYLINDER GP-STICK S/N JLC1-UP; JLD1-UP 150-MM (5.9-IN) BORE X 1646-MM (64.8-IN) STROKE PART OF 179-9784 CYLINDER & SEAL GP-STICK Type 1 AN ATTACHMENT 325C


HYDRAULIC SYSTEM
CYLINDER GP
DRIVE GP
FILTER GP

EXCAVATOR 325C EXCAVATOR JLC
 325C & 325C L Excavators JLC00001-UP (MACHINE) POWERED BY 3126 Engine SEBP3661 325C JLC   (2001)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP-COUPLER
169-0753 CYLINDER GP-COUPLER
CYLINDER GP-HYDRAULIC
204-4907 CYLINDER GP-HYDRAULIC
CYLINDER GP-STICK
179-9785 CYLINDER GP-STICK
CYLINDER GP-STICK
179-9785 CYLINDER GP-STICK
CYLINDER GP-STICK
191-5551 CYLINDER GP-STICK
CYLINDER GP-STICK
360-5459 CYLINDER GP-STICK
 

#SEBP36610470
 

179-9785: CYLINDER GP-STICK

179-9785 CYLINDER GP-STICK
S/N JLC1-UP; JLD1-UP
150-MM (5.9-IN) BORE X 1646-MM (64.8-IN) STROKE
PART OF 179-9784 CYLINDER & SEAL GP-STICK
Type 1
AN ATTACHMENT
i01488441 SEBP3661
1799785 CYLINDER GP-STICK Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-4660 [1] HEAD  
2. 7Y-4669 J [1] RING-BACKUP  
3. 7Y-4672 [1] RING-RETAINING  
4. 7Y-4695 M [1] LOCKNUT (M80X2-THD)  
5. 9X-3601 J [1] SEAL AS  
6. 188-4217 J [2] RING  
7. 188-4218 J [1] RING  
8. 194-8315 [1] CYLINDER AS  
8A. 186-5477 [1] BUSHING  
9. 5I-8516 J [1] RING-SEAL  
10. 170-9864 J [1] SEAL-U-CUP  
11. 165-9290 J [1] SEAL-LIP TYPE  
12. 188-4216 [1] PISTON  
13. 194-8321 [1] ROD AS  
13A. 186-5477 [1] BUSHING  
14. 095-0929 [2] RING-RETAINING  
15. 095-1633 J [1] SEAL-O-RING  
16. 103-8378 [1] RING-RETAINING  
17. 103-8379 [1] RING  
18. 103-8380 [1] STOP  
19. 114-0760 [1] BUSHING  
20. 167-2217 J [1] SEAL AS-BUFFER  
21. 7Y-4673 J [1] RING-BACKUP  
22. 7Y-4918 [1] STOP  
23. 7Y-5215 M [8] BOLT-SOCKET HEAD (M24X3X90-MM)  
   
    AVAILABLE REPAIR KIT(S):
  191-5619 J [1] KIT-SEAL  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP36610471
 

179-9785: CYLINDER GP-STICK

179-9785 CYLINDER GP-STICK
S/N JLC1-UP; JLD1-UP
150-MM (5.9-IN) BORE X 1646-MM (64.8-IN) STROKE
PART OF 179-9784 CYLINDER & SEAL GP-STICK
Type 2
AN ATTACHMENT
i02589696 SEBP3661
1799785 CYLINDER GP-STICK Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-4660 [1] HEAD  
2. 7Y-4669 J [1] RING-BACKUP  
3. 7Y-4672 [1] RING-RETAINING  
4. 7Y-4695 M [1] LOCKNUT (M80X2-THD)  
5. 9X-3601 J [1] SEAL AS  
6. 188-4217 J [2] RING  
7. 188-4218 J [1] RING  
8. 234-4509 C [1] CYLINDER AS  
8A. 235-7770 [1] BUSHING  
9. 242-6833 CJ [1] RING-SEAL  
10. 170-9864 J [1] SEAL-U-CUP  
11. 165-9290 J [1] SEAL-LIP TYPE  
12. 188-4216 [1] PISTON  
13. 266-7839 C [1] ROD AS  
13A. 235-7770 [1] BUSHING  
14. 095-0929 [2] RING-RETAINING  
15. 095-1633 J [1] SEAL-O-RING  
16. 103-8378 [1] RING-RETAINING  
17. 103-8379 [1] RING  
18. 103-8380 [1] STOP  
19. 114-0760 [1] BUSHING  
20. 128-9265 J [1] SEAL-BUFFER  
21. 7Y-4673 J [1] RING-BACKUP  
22. 7Y-4918 [1] STOP  
23. 7Y-5215 M [8] BOLT-SOCKET HEAD (M24X3X90-MM)  
   
    AVAILABLE REPAIR KIT(S):
  242-6840 CJ [1] KIT-SEAL (STICK)  
  C   CHANGE FROM PREVIOUS TYPE
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP36610472
 

191-5551: CYLINDER GP-STICK

191-5551 CYLINDER GP-STICK
S/N JLC1-UP; JLD1-UP
170-MM (6.7-IN) BORE X 1738-MM (68.4-IN) STROKE
PART OF 191-5550 CYLINDER & SEAL GP-STICK
AN ATTACHMENT
i01537024 SEBP3661
1915551 CYLINDER GP-STICK Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 191-5620 [1] CYLINDER AS  
1A. 236-6275 [1] BUSHING  
2. 103-8345 [1] RING-RETAINING  
3. 107-6579 [1] RING  
4. 107-6933 [1] STOP  
5. 7Y-4956 M [1] LOCKNUT (M90X2-THD)  
6. 191-5604 J [2] RING  
7. 9X-3607 J [1] SEAL AS  
8. 191-5605 J [1] RING  
9. 191-5603 [1] PISTON  
10. 231-6843 J [1] RING-SEAL  
11. 191-5705 [1] STOP  
12. 095-1726 J [1] SEAL-O-RING  
13. 7Y-4945 J [1] RING-BACKUP  
14. 191-5643 [1] RING-RETAINING  
15. 191-5644 [1] BUSHING  
16. 191-5645 J [1] SEAL-BUFFER  
17. 242-6811 [1] ROD AS  
17A. 241-7342 [1] BUSHING  
18. 191-5646 J [1] SEAL-U-CUP  
19. 191-5647 J [1] RING-BACKUP  
20. 191-5648 J [1] SEAL-LIP TYPE  
21. 191-5602 [1] HEAD  
22. 7Y-5239 M [8] BOLT-SOCKET HEAD (M24X3X100-MM)  
23. 095-0930 [2] RING-RETAINING (EXTERNAL)  
   
    AVAILABLE REPAIR KIT(S):
  231-6844 J [1] KIT-SEAL (STICK CYLINDER)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP36610473
 

360-5459: CYLINDER GP-STICK

360-5459 CYLINDER GP-STICK
S/N JLC1-UP
160-MM (6.3-IN) BORE X 1050-MM (41.3-IN) STROKE
PART OF 204-4906 CYLINDER & SEAL GP-STICK
AN ATTACHMENT
i04226950 SEBP3661
3605459 CYLINDER GP-STICK Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6C-6088 [1] HEAD  
2. 7Y-4622 [1] LOCKNUT (SPECIAL)  
3. 7Y-4631 [1] RING-RETAINING  
4. 087-5005 [1] STOP  
5. 103-8379 [1] RING  
6. 106-9595 [1] STOP  
7. 165-9288 J [1] SEAL-LIP TYPE  
8. 372-2151 J [1] SEAL-BUFFER  
9. 185-0592 [1] PISTON  
10. 247-8829 J [1] RING-SEAL  
11. 323-3838 [1] CYLINDER AS-HYDRAULIC  
11A. 290-9182 [1] BUSHING  
12. 360-5446 [1] ROD AS  
12A. 290-9182 [1] BUSHING  
13. 087-5550 J [1] RING-BACKUP  
14. 095-0929 J [2] RING-RETAINING  
15. 095-1635 J [1] SEAL-O-RING  
16. 103-8378 [1] RING-RETAINING  
17. 185-0230 J [2] RING  
18. 185-0231 J [1] RING  
19. 372-2152 J [1] SEAL-U-CUP  
20. 5M-6213 [1] PLUG-PIPE (1/4-18-THD)  
21. 5M-6214 [1] PLUG (1/8-27 PTF)  
22. 6C-6093 [1] BUSHING  
23. 7Y-4628 J [1] RING (BACKUP)  
24. 7Y-5239 M [8] BOLT-SOCKET HEAD (M24X3X100-MM)  
25. 9X-3604 J [1] SEAL AS  
   
    AVAILABLE REPAIR KIT(S):
  397-9296 J [1] KIT-SEAL (BOOM CYLINDER)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP36610474
 

191-2693: DRIVE GP-SWING

191-2693 DRIVE GP-SWING -WITHOUT MOTOR
S/N JLC1-UP; JLD1-UP
PART OF 199-4487 DRIVE GP-SWING
i01483666 SEBP3661
1912693 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-7466 [4] GEAR-PLANETARY (23-TEETH)  
2. 227-6221 [1] BREATHER AS (SWING DRIVE)  
2A. 4H-6112 [1] BREATHER (SWING DRIVE)  
2B. 227-6215 [1] BOSS (1/4-18-THD)  
2C. 267-6785 [1] PIPE  
3. 6V-7238 [1] VALVE-SHUTOFF  
4. 7I-7728 [1] CARRIER-PLANETARY  
5. 7Y-0225 [3] SHAFT-PLANETARY  
6. 7Y-1434 [2] SPACER (40X69.5X6-MM THK)  
7. 093-1730 [2] RING-RETAINING  
8. 093-1731 [1] RING-RETAINING  
9. 094-0611 [6] WASHER (47.3X76X1-MM THK)  
10. 094-1528 [8] WASHER (53X84X1-MM THK)  
11. 136-2940 [1] BEARING  
12. 096-2653 [1] RING-RETAINING  
13. 136-2904 [1] BEARING  
14. 114-1383 [4] SHAFT-PLANETARY  
15. 114-1398 [1] GAUGE-OIL LEVEL (SWING DRIVE)  
16. 114-1399 [1] PIPE-GAUGE  
17. 114-1401 [1] COVER-HOUSING  
18. 191-2696 [1] CAGE  
19. 135-9044 [2] SEAL-LIP TYPE  
20. 169-5617 [1] GEAR-SUN (18-TEETH)  
21. 169-5618 [3] GEAR-PLANETARY (27-TEETH)  
22. 191-2579 [1] CARRIER-PLANETARY  
23. 171-9280 [1] GEAR-RING (72-TEETH)  
24. 191-2694 [1] SHAFT-PINION  
25. 191-2695 [1] HOUSING  
26. 171-9283 [1] GEAR-SUN (24-TEETH)  
27. 171-9375 [1] SEAL-O-RING  
28. 191-2697 [1] SPACER (110X140X90.1-MM THK)  
29. 509-6676 [7] PIN-SPRING  
30. 3K-0360 [1] SEAL-O-RING  
31. 8J-8879 [1] SEAL-O-RING  
32. 7Y-0252 [3] BEARING AS-ROLLER  
33. 191-2513 [8] BEARING AS-ROLLER  
34. 453-3447 M [8] BOLT (M12X1.75X40-MM)  
35. 451-2182 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
36. 453-2843 M [16] BOLT (M16X2X180-MM)  
37. 451-2175 [16] WASHER-HARD (17.5X30X3.5-MM THK)  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP36610475
 

199-4487: DRIVE GP-SWING

199-4487 DRIVE GP-SWING -WITH MOTOR
S/N JLC1-UP; JLD1-UP
PART OF 171-9410, 263-4692 POWER TRAIN AR
i01483602 SEBP3661
1994487 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 191-2693 Y [1] DRIVE GP-SWING (WITHOUT MOTOR)  
2. 179-9774 Y [1] MOTOR & MTG GP-SWING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP36610476
 

418-7154: DRIVE GP-SWING

418-7154 DRIVE GP-SWING -WITHOUT MOTOR
S/N JLC1-UP; JLD1-UP
AN ATTACHMENT
i06708825 SEBP3661
4187154 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-7238 [1] VALVE-SHUTOFF (HYDRAULIC OIL)  
2. 094-0611 [14] WASHER (47.3X76X1-MM THK)  
3. 114-1398 [1] GAUGE-OIL LEVEL (SWING DRIVE)  
4. 114-1399 [1] PIPE-GAUGE  
5. 191-2694 [1] SHAFT-PINION  
6. 191-2696 [1] CAGE  
7. 227-6221 [1] BREATHER AS (SWING DRIVE)  
  4H-6112 [1] BREATHER (SWING DRIVE)  
  227-6215 [1] BOSS (1/4-18-THD)  
  267-6785 [1] PIPE  
8. 296-6268 [3] BEARING AS-ROLLER  
9. 418-7160 [1] GEAR-SUN (13-TEETH, 18-TEETH)  
10. 418-7161 [1] GEAR-SUN (23-TEETH)  
11. 418-7162 [3] GEAR-PLANETARY (25-TEETH)  
12. 418-7163 [4] GEAR-PLANETARY (22-TEETH)  
13. 418-7164 [1] GEAR-RING (69-TEETH)  
14. 418-7167 [4] SHAFT  
15. 418-7196 [1] HOUSING  
16. 418-7232 [1] COVER-HOUSING  
17. 418-7233 [8] BEARING AS-ROLLER  
18. 418-7234 [1] CARRIER AS  
19. 418-7235 [1] CARRIER-PLANETARY  
20. 422-1352 [2] SPACER (49.6X69.5X6-MM THK)  
21. 422-4054 [3] RING-RETAINING  
22. 451-2182 [50] WASHER-HARD (13.5X25.5X3-MM THK)  
23. 453-3447 M [20] BOLT (M12X1.75X40-MM)  
24. 093-1730 [2] RING-RETAINING  
25. 095-0670 M [30] BOLT (M12X1.75X45-MM)  
26. 509-6676 [4] PIN-SPRING  
27. 096-2653 [1] RING-RETAINING  
28. 135-9044 [2] SEAL-LIP TYPE  
29. 136-2904 [1] BEARING  
30. 136-2940 [1] BEARING  
31. 191-2697 [1] SPACER (110X140X90.1-MM THK)  
32. 3K-0360 [1] SEAL-O-RING  
33. 8J-8879 [1] SEAL-O-RING  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP36610477
 

171-9412: FASTENER GP-SWING & FINAL DR

171-9412 FASTENER GP-SWING & FINAL DR
S/N JLC1-UP; JLD1-UP
PART OF 171-9410, 263-4692 POWER TRAIN AR
i01483537 SEBP3661
1719412 FASTENER GP-SWING & FINAL DR Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4141 M [40] BOLT (M20X2.5X70-MM)  
2. 7X-2576 M [16] BOLT (M24X3X70-MM)  
3. 8T-4123 [40] WASHER (3.62X5.75X0.375-MM THK)  
4. 8T-4167 [16] WASHER-HARD (26X44X4-MM THK)  
5. 096-4755 [1] PIN  
6. 1U-8846 B SEALANT-GASKET  
8. 2B-7561 [2] CORK  
9. 5P-0767 E HOSE (90-CM)  
10. 5D-1026 [1] CLAMP-BAND  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP36610478
 

202-7223: FILTER & LINES GP-HYDRAULIC

202-7223 FILTER & LINES GP-HYDRAULIC
S/N JLC1-UP; JLD1-UP
PART OF 202-7228, 217-5078 HYDRAULIC AR
Type 1
AN ATTACHMENT
i01487937 SEBP3661
2027223 FILTER & LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 142-6790 Y [1] FILTER GP-OIL (HYDRAULIC)  
3. 202-7222 [1] PLATE  
4. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
5. 189-1510 [1] PLATE  
6. 8T-4956 M [2] BOLT (M12X1.75X35-MM)  
7. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
8. 148-8378 [1] ELBOW AS  
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8724 [1] ELBOW  
10. 164-5624 [1] ELBOW AS  
  3J-1907 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  9X-2085 [1] ELBOW  
11. 123-3052 I [1] HOSE AS  
12. 108-7203 I [1] HOSE AS  
13. 148-8444 [1] TEE AS-SWIVEL  
  6V-8398 [1] SEAL-O-RING  
  6V-9837 [1] TEE-SWIVEL  
14. 148-8345 [1] CONNECTOR AS  
  2M-9780 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8638 [1] CONNECTOR  
15. 164-5608 [1] CONNECTOR AS  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  8T-1687 [1] CONNECTOR  
16. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
17. 8T-4908 M [4] BOLT (M8X1.25X25-MM)  
18. 7K-1181 [3] STRAP-CABLE  
19. 164-5586 [1] TEE AS  
  6V-8398 [1] SEAL-O-RING  
  7X-0871 [1] TEE  
23. 148-8415 [1] REDUCER AS  
  6V-8397 [1] SEAL-O-RING  
  6V-8936 [1] REDUCER  
24. 148-8336 [1] CONNECTOR AS  
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8636 [1] CONNECTOR  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36610479
 

202-7223: FILTER & LINES GP-HYDRAULIC

202-7223 FILTER & LINES GP-HYDRAULIC
S/N JLC1-UP; JLD1-UP
PART OF 202-7228, 217-5078 HYDRAULIC AR
Type 2
AN ATTACHMENT
i02375093 SEBP3661
2027223 FILTER & LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 250-0728 CY [1] FILTER GP-OIL (HYDRAULIC)  
2. 6V-8076 C [1] ELBOW  
3. 202-7222 [1] PLATE  
4. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
5. 189-1510 [1] PLATE  
6. 8T-4956 M [2] BOLT (M12X1.75X35-MM)  
7. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
8. 148-8378 [1] ELBOW AS  
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8724 [1] ELBOW  
9. 3J-1907 C [2] SEAL-O-RING  
10. 164-5624 [1] ELBOW AS  
  3J-1907 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  9X-2085 [1] ELBOW  
11. 123-3052 I [1] HOSE AS  
12. 108-7203 I [1] HOSE AS  
13. 148-8444 [1] TEE AS-SWIVEL  
  6V-8398 [1] SEAL-O-RING  
  6V-9837 [1] TEE-SWIVEL  
14. 148-8345 [1] CONNECTOR AS  
  2M-9780 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8638 [1] CONNECTOR  
15. 164-5608 [1] CONNECTOR AS  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  8T-1687 [1] CONNECTOR  
16. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
17. 8T-4908 M [4] BOLT (M8X1.25X25-MM)  
18. 7K-1181 [3] STRAP-CABLE  
19. 164-5586 [1] TEE AS  
  6V-8398 [1] SEAL-O-RING  
  7X-0871 [1] TEE  
20. 6V-3965 C [1] FITTING (QUICK DISCONNECT)  
21. 6V-0852 C [1] CAP-DUST  
23. 148-8415 [1] REDUCER AS  
  6V-8397 [1] SEAL-O-RING  
  6V-8936 [1] REDUCER  
24. 148-8336 [1] CONNECTOR AS  
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8636 [1] CONNECTOR  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Service Magazine
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2011/10/17
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog 325C :

CYLINDER GP-HYDRAULIC
204-4907 CYLINDER GP-HYDRAULIC
CYLINDER GP-COUPLER
169-0753 CYLINDER GP-COUPLER
CYLINDER GP-COUPLER
169-0329 CYLINDER GP-COUPLER
CYLINDER GP-BUCKET
283-6132 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
247-8853 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
220-1532 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
179-9764 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
177-2465 CYLINDER GP-BUCKET
CYLINDER GP-STICK
179-9785 CYLINDER GP-STICK
CYLINDER GP-STICK
191-5551 CYLINDER GP-STICK
CYLINDER GP-STICK
360-5459 CYLINDER GP-STICK
DRIVE GP-SWING
191-2693 DRIVE GP-SWING
DRIVE GP-SWING
199-4487 DRIVE GP-SWING
DRIVE GP-SWING
418-7154 DRIVE GP-SWING
FASTENER GP-SWING & FINAL DR
171-9412 FASTENER GP-SWING & FINAL DR
FILTER & LINES GP-HYDRAULIC
202-7223 FILTER & LINES GP-HYDRAULIC

Truck sale:

 
 
Caterpillar 325C
- Crawler Excavators
WESTERN STATES EQUIPMENT
 
304,350 
Caterpillar 325 CF, Crawler Excavators, Construction

WHEELER MACHINERY CO.
 
304,355 
Caterpillar 325 CF, Crawler Excavators, Construction

WHEELER MACHINERY CO.
 
 
Caterpillar 325C, Raupenbagger, Bau-Und Bergbauausrüstung
- Crawler excavators
WESTERN STATES EQUIPMENT
Caterpillar 325 CF, Crawler Excavators, Construction
270,965 
Caterpillar 325 CF, Crawler Excavators, Construction
- Crawler excavators
WHEELER MACHINERY CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.