AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

304-0675 PUMP GP-UNIT INJECTOR HYD S/N 4ZF1-UP; SAN1-UP PART OF 165-4450 PUMP GP-UNIT INJECTOR HYD ALSO AN ATTACHMENT 330C


FUEL SYSTEM
PUMP GP-UNIT INJECTOR HYD
REGULATOR GP-FUEL PRESSURE
TANK GP-FUEL

EXCAVATOR 330C EXCAVATOR JCD
 330C & 330C L Excavators JCD00001-UP (MACHINE) POWERED BY C-9 Engine SEBP3662 330C JCD   (2001)

FUEL SYSTEM

PUMP GP-UNIT INJECTOR HYD
PUMP GP-UNIT INJECTOR HYD
165-4450 PUMP GP-UNIT INJECTOR HYD
PUMP GP-UNIT INJECTOR HYD
295-4775 PUMP GP-UNIT INJECTOR HYD
PUMP GP-UNIT INJECTOR HYD
304-0675 PUMP GP-UNIT INJECTOR HYD
PUMP GP-UNIT INJECTOR HYD
312-0675 PUMP GP-UNIT INJECTOR HYD
PUMP GP-UNIT INJECTOR HYD
319-0675 PUMP GP-UNIT INJECTOR HYD
 

#SEBP36620180
 

304-0675: PUMP GP-UNIT INJECTOR HYD

304-0675 PUMP GP-UNIT INJECTOR HYD
S/N 4ZF1-UP; SAN1-UP
PART OF 165-4450 PUMP GP-UNIT INJECTOR HYD
ALSO AN ATTACHMENT
i02869682 SEBP3662
3040675 PUMP GP-UNIT INJECTOR HYD Parts scheme
  For full view, you need register

Parts for your 330C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 178-2357 [1] PUMP GP-FUEL TRANSFER  
  5P-7814 [1] SEAL-O-RING  
  7S-5005 [1] DOWEL  
  8C-3079 [2] SEAL-O-RING  
2. 179-8128 [1] SEAL-O-RING (FUEL TRANSFER PUMP)  
 

#SEBP36620181
 

312-0675: PUMP GP-UNIT INJECTOR HYD

312-0675 PUMP GP-UNIT INJECTOR HYD
S/N 4ZF1-UP; SAN1-UP; 7AZ1-UP
PART OF 165-4450 PUMP GP-UNIT INJECTOR HYD
ALSO AN ATTACHMENT
i05079491 SEBP3662
3120675 PUMP GP-UNIT INJECTOR HYD Parts scheme
  For full view, you need register

Parts for your 330C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 153-7036 [1] SPOOL  
2. 166-8636 M [3] BOLT-SOCKET HEAD (M5X0.8X18-MM)  
3. 178-2357 [1] PUMP GP-FUEL TRANSFER  
  179-8128 [1] SEAL-O-RING  
  227-5904 [1] SEAL-O-RING  
  239-2402 [2] SEAL-O-RING  
  256-0302 [1] BOLT (M8X1.25X130-MM)  
  185-3241 B [1] SEAL-O-RING  
4. 179-8128 [1] SEAL-O-RING  
5. 228-5897 M [4] BOLT-TORX (M8X1.25X136.7-MM)  
6. 239-2402 [4] SEAL-O-RING  
7. 1F-7960 [1] WASHER (13.5X32X6-MM THK)  
8. 1N-8062 [1] BEARING AS-NEEDLE  
9. 5C-2890 M [1] NUT (M6X1-THD)  
10. 8C-6711 [1] NUT-RETAINER (1/2-20-THD)  
11. 9X-8256 [1] WASHER (6.6X12X2-MM THK)  
   
    PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP36620182
 

319-0675: PUMP GP-UNIT INJECTOR HYD

319-0675 PUMP GP-UNIT INJECTOR HYD
S/N 4ZF1-UP; SAN1-UP
PART OF 165-4450 PUMP GP-UNIT INJECTOR HYD
ALSO AN ATTACHMENT
i04899231 SEBP3662
3190675 PUMP GP-UNIT INJECTOR HYD Parts scheme
  For full view, you need register

Parts for your 330C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 313-4620 M [3] SCREW-PAN HEAD (M5X0.8X25-MM)  
2. 318-6357 Y [1] PUMP GP-FUEL TRANSFER  
3. 179-8128 [1] SEAL-O-RING (FUEL SYSTEM)  
4. 262-0284 [1] RING-RETAINING  
5. 228-5897 M [4] BOLT-TORX (M8X1.25X136.7-MM)  
6. 239-2402 [4] SEAL-O-RING  
7. 1F-7960 [1] WASHER (13.5X32X6-MM THK)  
8. 1N-8062 [1] BEARING AS-NEEDLE  
9. 5C-2890 M [1] NUT (M6X1-THD)  
10. 8C-6711 [1] NUT-RETAINER (1/2-20-THD)  
11. 9X-8267 [1] WASHER (6.6X12X2-MM THK)  
12. 153-7036 [1] SPOOL  
13. 260-5716 [1] SPOOL  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36620183
 

198-1897: REGULATOR GP-FUEL PRESSURE

198-1897 REGULATOR GP-FUEL PRESSURE
S/N 4ZF1-UP
PART OF 190-5383 LINES GP-FUEL
ALSO AN ATTACHMENT
i01619858 SEBP3662
1981897 REGULATOR GP-FUEL PRESSURE Parts scheme
  For full view, you need register

Parts for your 330C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 229-8872 [1] REGULATOR GP-FUEL PRESSURE  
1A. 6V-5049 [1] SEAL-O-RING  
1B. 294-8621 [1] REGULATOR AS (FUEL PRESSURE)  
2. 295-1803 [1] ELBOW AS  
2A. 6V-5049 [1] SEAL-O-RING  
2B. 196-6838 [1] ELBOW  
 

#SEBP36620184
 

205-1306: REGULATOR GP-FUEL PRESSURE

205-1306 REGULATOR GP-FUEL PRESSURE
S/N 4ZF6363-7693; 4ZF7798-UP; SAN1-UP; 7AZ1-UP
PART OF 190-5383 LINES GP-FUEL
ALSO AN ATTACHMENT
i01964034 SEBP3662
2051306 REGULATOR GP-FUEL PRESSURE Parts scheme
  For full view, you need register

Parts for your 330C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 295-1803 [1] ELBOW AS  
1A. 6V-5049 [1] SEAL-O-RING  
  196-6838 ELBOW  
2. 232-0343 Y [1] REGULATOR GP-FUEL PRESSURE  
  Y   SEPARATE ILLUSTRATION
 

#SEBP36620185
 

232-0343: REGULATOR GP-FUEL PRESSURE

232-0343 REGULATOR GP-FUEL PRESSURE
S/N 4ZF6363-UP; SAN1-UP; 7AZ1-UP
PART OF 190-5383 LINES GP-FUEL, 205-1306 REGULATOR GP-FUEL PRESSURE
ALSO AN ATTACHMENT
i01970511 SEBP3662
2320343 REGULATOR GP-FUEL PRESSURE Parts scheme
  For full view, you need register

Parts for your 330C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 214-7568 [1] SEAL-O-RING  
2. 369-6662 [1] REGULATOR AS (FUEL PRESSURE)  
 

#SEBP36620186
 

184-9065: TANK & MTG GP-FUEL

184-9065 TANK & MTG GP-FUEL
S/N JCD1-298; JNK1-259
PART OF 218-9386, 223-9291 CHASSIS AR
i01520534 SEBP3662
1849065 TANK & MTG GP-FUEL Parts scheme
  For full view, you need register

Parts for your 330C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-8502 [1] PADLOCK GP  
  5P-8500 [1] KEY  
  8Y-6364 [1] SLEEVE  
2. 184-9066 Y [1] TANK GP-FUEL  
3. 177-5886 [4] SPACER (17X35X87-MM THK)  
4. 8T-4174 M [4] BOLT (M16X2X120-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36620187
 

184-9065: TANK & MTG GP-FUEL

184-9065 TANK & MTG GP-FUEL
S/N JCD299-UP; JNK260-UP
PART OF 218-9386, 223-9291 CHASSIS AR
i02204297 SEBP3662
1849065 TANK & MTG GP-FUEL Parts scheme
  For full view, you need register

Parts for your 330C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 246-2641 [1] PADLOCK GP  
2. 236-6465 CY [1] TANK GP-FUEL  
3. 177-5886 [4] SPACER (17X35X87-MM THK)  
4. 8T-4174 M [4] BOLT (M16X2X120-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36620188
 

184-9066: TANK GP-FUEL

184-9066 TANK GP-FUEL
S/N JCD1-UP; JNK1-UP
615-L (162-US GAL)
PART OF 184-9065 TANK & MTG GP-FUEL
i01521143 SEBP3662
1849066 TANK GP-FUEL Parts scheme
  For full view, you need register

Parts for your 330C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-0378 [1] GASKET-RUBBER  
2. 7X-7700 [1] CAP AS-FUEL (LOCKABLE, VENTED)  
  9X-2205 [1] KIT-CAP FILTER (FUEL TANK)  
    (INCLUDES FILTER AS, GASKETS, VALVE & SCREWS)
2A. 9X-8600 [1] SEAL-O-RING  
3. 7Y-2398 [1] GAUGE GP-SIGHT (FUEL LEVEL)  
3A. 4I-0123 [1] PIPE  
3B. 7Y-4754 [2] BLOCK  
3C. 094-3247 M [2] BOLT (M10X1.5X36-MM)  
3D. 095-1514 [4] SEAL-O-RING  
3E. 095-1517 [4] SEAL-O-RING  
4. 9P-7121 [1] STRAINER-FUEL (FUEL TANK)  
5. 003-7764 [1] END-HOSE  
6. 128-4411 [1] VALVE AS (FUEL SHUTOFF)  
7. 163-6700 [1] SENSOR GP-FUEL LEVEL  
7A. 8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
7B. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
8. 165-2881 [1] VALVE-BALL (SEDIMENT, WATER)  
9. 9S-6130 [1] PLUG  
10. 184-9073 [1] COVER AS  
11. 193-9696 [1] HOSE-DRAIN  
12. 095-0736 M [5] SCREW-MACHINE (M5X0.8X10-MM)  
13. 135-8573 [6] BOLT AS  
14. 2S-4078 [1] SEAL-O-RING  
15. 3B-0551 [1] PLUG-PIPE  
16. 8T-0328 [5] WASHER-HARD (5.5X10X1-MM THK)  
  M   METRIC PART
 

#SEBP36620189
 

184-9066: TANK GP-FUEL

184-9066 TANK GP-FUEL
S/N JCD1-298; JNK1-259
615-L (162-US GAL)
PART OF 184-9065 TANK & MTG GP-FUEL
i02185751 SEBP3662
1849066 TANK GP-FUEL Parts scheme
  For full view, you need register

Parts for your 330C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-0378 [1] GASKET-RUBBER  
2. 7X-7700 HN [1] CAP AS-FUEL (LOCKABLE, VENTED)  
  9X-8600 [1] SEAL-O-RING  
    -OR-
  349-7059 JN [1] CAP AS-FUEL (LOCKABLE, VENTED)(EXTREME SERVICE)  
  7D-7111 [1] SEAL-O-RING  
3. 223-3095 CY [1] GAUGE GP-SIGHT (FUEL LEVEL)  
4. 9P-7121 [1] STRAINER-FUEL (FUEL TANK)  
5. 003-7764 [1] END-HOSE  
6. 128-4411 [1] VALVE AS (FUEL SHUTOFF)  
7. 163-6700 [1] SENSOR GP-FUEL LEVEL  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
8. 165-2881 [1] VALVE-BALL (SEDIMENT, WATER)  
9. 9S-6130 [1] PLUG  
10. 184-9073 [1] COVER AS  
11. 193-9696 [1] HOSE-DRAIN  
12. 095-0736 M [5] SCREW-MACHINE (M5X0.8X10-MM)  
13. 135-8573 [6] BOLT AS  
14. 2S-4078 [1] SEAL-O-RING  
15. 3B-0551 [1] PLUG-PIPE  
16. 8T-0328 [5] WASHER-HARD (5.5X10X1-MM THK)  
   
    AVAILABLE REPAIR KIT(S):
  9X-2205 H [1] KIT-CAP FILTER (FUEL TANK)  
    (INCLUDES FILTER AS, SCREWS, GASKETS & VALVE)
  350-7735 J [1] KIT-CAP FILTER (FUEL TANK)  
    (INCLUDES BREATHER BODY, BREATHER GASKET, MOUNTING SCREWS & NYLON WASHERS)
  C   CHANGE FROM PREVIOUS TYPE
  H   KIT MARKED H SERVICES PART(S) MARKED H
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  N   REQUIRES CORPORATE KEY
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Installation of the 262-5465 Check Valve Kit or the 266-4455 Check Valve Kit {1714}
Installation of the 262-5465 Check Valve Kit or the 266-4455 Check Valve Kit {1714}
Procedure for Troubleshooting and Cleaning the Oil Rail System for the Hydraulic Electronic Unit Injector (HEUI) {1100, 1126, 1250, 1251, 1261, 1290}
Procedure for Troubleshooting and Cleaning the Oil Rail System for the Hydraulic Electronic Unit Injector (HEUI) {1100, 1126, 1250, 1251, 1261, 1290}
Installation Procedure for the Fuel Transfer Kit on the Hydraulic Electronic Unit Injector (HEUI) Pump{1256}
Installation Procedure for the Fuel Transfer Kit on the Hydraulic Electronic Unit Injector (HEUI) Pump{1256}
Specifications
Injection Actuation Pressure Sensor
C-9 Engines for Caterpillar Built Machines
Unit Injector Hydraulic Pump
C-9 Engines for Caterpillar Built Machines
Injection Actuation Oil Temperature Sensor
C-9 Engines for Caterpillar Built Machines
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Troubleshooting
CID 0042 FMI 11 Inject Actuation Control Valve open/short
C-9 Engine for the 973C Track-Type Loader
CID 0164 FMI 00 High Injector Actuation Pressure
C-9 Engine for Caterpillar Built Machines
Injection Actuation Pressure Control Valve Circuit - Test
C-9 Engine for the 973C Track-Type Loader
Injection Actuation Pressure - Test
C-9 Engine for the 973C Track-Type Loader
Injection Actuation Pressure - Test
C-9 Engine for Caterpillar Built Machines
E164 High Injector Actuation Pressure
C-9 Engine for Caterpillar Built Machines
Disassembly and Assembly
Injection Actuation Pressure Sensor - Remove and Install
C9
Engine For Caterpillar Built Machines
Unit Injector Hydraulic Pump - Remove
C9
Engine For Caterpillar Built Machines
Unit Injector Hydraulic Pump - Install
C9
Engine For Caterpillar Built Machines
Service Magazine
New Procedures for the Injection Actuation Pressure Test {1714}
2003/05/12
Addition to Troubleshooting , "Injection Actuation Pressure - Test" {1714}
2005/06/13
A New Kit for the Fuel Transfer Pump is Now Used {1256, 1714}
2008/06/30
Installation Procedure for the Fuel Transfer Kit on the Hydraulic Electronic Unit Injector (HEUI) Pump {1256}
2008/06/30
Diagnostic Publications for the Systems of the Hydraulic Electronic Unit Injector (HEUI) have been Updated {1100, 1126, 1250, 1251, 1261, 1290}
2009/08/10

Caterpillar Parts SIS Catalog 330C :

PUMP GP-UNIT INJECTOR HYD
295-4775 PUMP GP-UNIT INJECTOR HYD
PUMP GP-UNIT INJECTOR HYD
165-4450 PUMP GP-UNIT INJECTOR HYD
PUMP GP-UNIT INJECTOR HYD
165-4450 PUMP GP-UNIT INJECTOR HYD
PUMP GP-UNIT INJECTOR HYD
165-4450 PUMP GP-UNIT INJECTOR HYD
PUMP GP-UNIT INJECTOR HYD
165-4450 PUMP GP-UNIT INJECTOR HYD
PUMP GP-UNIT INJECTION
172-5780 PUMP GP-UNIT INJECTION
PUMP GP-UNIT INJECTION
172-5780 PUMP GP-UNIT INJECTION
PUMP GP-REFUELING
236-6320 PUMP GP-REFUELING
PUMP GP-UNIT INJECTOR HYD
312-0675 PUMP GP-UNIT INJECTOR HYD
PUMP GP-UNIT INJECTOR HYD
319-0675 PUMP GP-UNIT INJECTOR HYD
REGULATOR GP-FUEL PRESSURE
198-1897 REGULATOR GP-FUEL PRESSURE
REGULATOR GP-FUEL PRESSURE
205-1306 REGULATOR GP-FUEL PRESSURE
REGULATOR GP-FUEL PRESSURE
232-0343 REGULATOR GP-FUEL PRESSURE
TANK & MTG GP-FUEL
184-9065 TANK & MTG GP-FUEL
TANK & MTG GP-FUEL
184-9065 TANK & MTG GP-FUEL
TANK GP-FUEL
184-9066 TANK GP-FUEL

Truck sale:

Caterpillar 330C
 
Caterpillar 330C
- Crawler Excavators
CGT - COMPAGNIA GENERALE TRATTORI
 
375,750 
Caterpillar 330 CF, Crawler Excavators, Construction
- Crawler Excavators
WHEELER MACHINERY CO.
Caterpillar 330 CF, Crawler Excavators, Construction
379,533 
Caterpillar 330 CF, Crawler Excavators, Construction
- Crawler Excavators
WHEELER MACHINERY CO.
 
372,345 
Caterpillar 330 CF, Crawler Excavators, Construction
- Crawler Excavators
WHEELER MACHINERY CO.
 
330,000 
Caterpillar 330 CF, Crawler Excavators, Construction
- Crawler Excavators
WHEELER MACHINERY CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.