AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

238-6268 WIRING GP-BOOM -VARIABLE ADJUSTABLE S/N JNK1-UP PART OF 238-6265 CONVERSION AR-MACHINE AN ATTACHMENT 330C


ELECTRICAL AND STARTING SYSTEM
WIRING GP

EXCAVATOR 330C EXCAVATOR JCD
 330C & 330C L Excavators JCD00001-UP (MACHINE) POWERED BY C-9 Engine SEBP3662 330C JCD   (2001)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
547-7976 SWITCH & WIRE GP-FUEL LEVEL
WIRING GP-BOOM
214-5104 WIRING GP-BOOM
WIRING GP-BOOM
238-6268 WIRING GP-BOOM
WIRING GP-BOOM FLOAT
193-3405 WIRING GP-BOOM FLOAT
WIRING GP-BOOM FLOAT
193-3405 WIRING GP-BOOM FLOAT
WIRING GP-BOOM FLOAT
193-3405 WIRING GP-BOOM FLOAT
 

#SEBP36620300
 

238-6268: WIRING GP-BOOM

238-6268 WIRING GP-BOOM -VARIABLE ADJUSTABLE
S/N JNK1-UP
PART OF 238-6265 CONVERSION AR-MACHINE
AN ATTACHMENT
i02324914 SEBP3662
2386268 WIRING GP-BOOM Parts scheme
  For full view, you need register

Parts for your 330C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 217-3869 [1] HARNESS AS-WIRING (VARIABLE ADJUSTABLE BOOM)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
2. 3S-2093 B [25] STRAP-CABLE  
3. 238-7913 [1] HARNESS AS-WIRING  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
  B   USE AS REQUIRED
 

#SEBP36620301
 

193-3405: WIRING GP-BOOM FLOAT

193-3405 WIRING GP-BOOM FLOAT
S/N JCD1-274; JNK1-215
PART OF 186-1296 CONTROL AR-AUXILIARY
AN ATTACHMENT
i01529996 SEBP3662
1933405 WIRING GP-BOOM FLOAT Parts scheme 1933405 WIRING GP-BOOM FLOAT Parts scheme
  For full view, you need register

Parts for your 330C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [22] STRAP-CABLE  
2. 214-8839 [1] HARNESS AS-SOLENOID  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
  155-2270 [7] KIT-CONNECTING PLUG (2-PIN)  
3. 7I-2673 [11] STRAP-CABLE  
4. 7X-2619 M [3] BOLT (M6X1X10-MM)  
5. 9X-8256 [3] WASHER (6.6X12X2-MM THK)  
6. 149-5050 [1] RELAY (24-VOLT)(SMARTBOOM, DISABLE)  
6A. 149-5050 [2] RELAY (24-VOLT)(SMARTBOOM, UP/DOWN)  
7. 204-1672 [1] HARNESS AS-WIRING (RELAY)  
  155-2265 [1] KIT-CONNECTING PLUG (8-PIN)  
8. 3S-2093 [10] STRAP-CABLE  
9. 186-4639 [1] SWITCH AS-ROCKER  
  167-3542 [1] RECEPTACLE-CONNECTOR (5-PIN)  
  167-3543 [5] TERMINAL (MALE)  
10. 8T-4196 M [1] BOLT (M10X1.5X35-MM)  
11. 111-4836 [1] CLIP  
  M   METRIC PART
 

#SEBP36620302
 

193-3405: WIRING GP-BOOM FLOAT

193-3405 WIRING GP-BOOM FLOAT
S/N JCD275-UP; JNK216-UP
PART OF 186-1296 CONTROL AR-AUXILIARY
Type 1
AN ATTACHMENT
i02487260 SEBP3662
1933405 WIRING GP-BOOM FLOAT Parts scheme 1933405 WIRING GP-BOOM FLOAT Parts scheme
  For full view, you need register

Parts for your 330C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [10] STRAP-CABLE  
2. 7I-2673 C [9] STRAP-CABLE  
3. 7K-1181 C [23] STRAP-CABLE  
4. 149-5050 [1] RELAY (24-VOLT)(SMARTBOOM UP/DOWN RELAY 1)  
4A. 149-5050 [1] RELAY (24-VOLT)(SMARTBOOM UP/DOWN RELAY 2)  
4B. 149-5050 [1] RELAY (24-VOLT)(SMARTBOOM, DISABLE)  
5. 186-4639 [1] SWITCH AS-ROCKER (SMARTBOOM)  
  167-3542 [1] RECEPTACLE-CONNECTOR (5-PIN)  
  167-3543 [5] TERMINAL (MALE)  
6. 204-1611 C [1] STRAP (DUAL)  
7. 204-1672 [1] HARNESS AS-WIRING (RELAY)  
    (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
  3S-2093 [11] STRAP-CABLE  
  149-5051 [1] CONNECTOR-RECEPTACLE  
8. 226-5409 C [1] HARNESS AS-WIRING (SOLENOID, SWITCH)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2270 [5] KIT-CONNECTING PLUG (2-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
9. 111-4836 C [2] CLIP  
10. 4P-7581 C [1] CLIP (LADDER)  
11. 7X-2619 M [3] BOLT (M6X1X10-MM)  
12. 8T-4121 C [1] WASHER-HARD (11X21X2.5-MM THK)  
13. 8T-4136 CM [1] BOLT (M10X1.5X25-MM)  
14. 8T-4137 CM [1] BOLT (M10X1.5X20-MM)  
15. 8T-4196 M [1] BOLT (M10X1.5X35-MM)  
16. 9X-8256 [3] WASHER (6.6X12X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP36620303
 

193-3405: WIRING GP-BOOM FLOAT

193-3405 WIRING GP-BOOM FLOAT
S/N JCD275-UP; JNK216-UP
PART OF 186-1296 CONTROL AR-AUXILIARY
Type 2
AN ATTACHMENT
i02487269 SEBP3662
1933405 WIRING GP-BOOM FLOAT Parts scheme
  For full view, you need register

Parts for your 330C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [10] STRAP-CABLE  
2. 7K-1181 C [20] STRAP-CABLE  
3. 149-5050 [2] RELAY (24-VOLT)(SMARTBOOM, UP/DOWN)  
3A. 149-5050 [1] RELAY (24-VOLT)(SMARTBOOM, DISABLE)  
4. 186-4639 [1] SWITCH AS-ROCKER (SMARTBOOM)  
  167-3542 [1] RECEPTACLE-CONNECTOR (5-PIN)  
  167-3543 [5] TERMINAL (MALE)  
5. 204-1672 [1] HARNESS AS-WIRING (RELAY)  
  155-2265 [1] KIT-CONNECTING PLUG (8-PIN)  
    (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
  3S-2093 [11] STRAP-CABLE  
6. 237-0497 C [1] HARNESS AS-WIRING (SOLENOID, SWITCH)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2270 [5] KIT-CONNECTING PLUG (2-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
7. 111-4836 [2] CLIP  
8. 7X-2619 M [3] BOLT (M6X1X10-MM)  
9. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
10. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
11. 8T-4196 M [1] BOLT (M10X1.5X35-MM)  
12. 9X-8256 [3] WASHER (6.6X12X2-MM THK)  
13. 7I-2673 C [17] STRAP-CABLE  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP36620304
 

184-7622: WIRING GP-CAB

184-7622 WIRING GP-CAB
S/N JCD1-281; JNK1-235
PART OF 211-7983, 217-5667, 217-5668 CAB GP
ALSO AN ATTACHMENT
i01394347 SEBP3662
1847622 WIRING GP-CAB Parts scheme
  For full view, you need register

Parts for your 330C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9W-1494 [1] KIT-SERVICE METER (24-VOLT)  
2. 9W-0335 [1] LIGHTER AS-CIGAR (24-VOLT)  
3. 4I-3064 E GUARD (10CM)  
4. 163-6795 [13] STRAP-CABLE  
5. 198-0857 [1] HARNESS AS (CAB)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  102-8802 [4] KIT-RECEPTACLE (2-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
  102-8806 [3] KIT-RECEPTACLE (8-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2265 [4] KIT-CONNECTING PLUG (8-PIN)  
  155-2270 [4] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
    (EACH CONNECTING PLUG KIT INCLUDES RECEPTACLE AS, WEDGE & INTERFACE SEAL)
6. 8T-6693 M [2] SCREW-MACHINE (M5X0.8X16-MM)  
7. 8T-0328 [6] WASHER-HARD (5.5X10X1-MM THK)  
8. 163-6810 [1] HARNESS AS-MONITOR  
9. 7Y-5226 M [2] NUT (M5X0.8-THD)  
10. 095-0736 M [2] SCREW-MACHINE (M5X0.8X10-MM)  
11. 096-5962 [2] WASHER-HARD (3.4X7X0.8-MM THK)  
12. 163-6701 [1] PANEL AS-CONTROL  
13. 132-1829 Y [1] ALARM GP (24-VOLT)(FAULT)  
14. 8T-4171 M [1] BOLT (M6X1X12-MM)  
15. 9X-8256 [1] WASHER (6.6X12X2-MM THK)  
16. 7K-1181 B [1] STRAP-CABLE  
17. 6V-9669 M [2] SCREW-MACHINE (M3X0.5X8-MM)  
18. 3C-6969 M [2] NUT (M3X0.5-THD)  
19. 3E-9872 M [1] SCREW AS (M4X0.7X12-MM)  
20. 111-4846 [1] CABLE  
21. 6C-3431 [1] ANTENNA  
22. 6C-9077 [1] WASHER  
23. 188-7681 [1] CONTROL GP-WIPER  
24. 5C-2874 M [2] NUT (M5X0.8-THD)  
25. 6C-9081 [2] LOCKWASHER  
26. 176-1919 [1] HARNESS AS-PANEL  
27. 157-3210 [1] PANEL AS-CONTROL  
28. 8T-0286 M [2] BOLT (M5X0.8X8-MM)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36620305
 

211-7989: WIRING GP-CAB

211-7989 WIRING GP-CAB -TILT CAB
S/N JCD1-UP; JNK1-UP
PART OF 211-7983 CAB GP
Type 1
AN ATTACHMENT
i01709347 SEBP3662
2117989 WIRING GP-CAB Parts scheme
  For full view, you need register

Parts for your 330C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3T-6655 [1] SWITCH AS-ROTARY (WIPER, WASHER)  
  7T-9302 [1] KNOB AS-WIPER SWITCH (WASHER)  
2. 219-6932 B [1] HARNESS AS-SWITCH  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
  B   USE AS REQUIRED
 

#SEBP36620306
 

211-7989: WIRING GP-CAB

211-7989 WIRING GP-CAB -TILT CAB
S/N JCD1-UP; JNK1-UP
PART OF 211-7983, 236-6500, 245-1063 CAB GP
Type 2
AN ATTACHMENT
i01810693 SEBP3662
2117989 WIRING GP-CAB Parts scheme
  For full view, you need register

Parts for your 330C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 219-6932 B [1] HARNESS AS-SWITCH  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  B   USE AS REQUIRED
 

#SEBP36620307
 

235-1748: WIRING GP-CAB

235-1748 WIRING GP-CAB -SEAT AIR COMPRESSOR, HEATER
S/N JCD1-UP; JNK1-UP
PART OF 235-1760 SUSPENSION GP-SEAT
AN ATTACHMENT
i02250245 SEBP3662
2351748 WIRING GP-CAB Parts scheme
  For full view, you need register

Parts for your 330C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 116-0118 [1] CLIP  
2. 9D-8508 [1] GROMMET  
3. 3S-2093 [13] STRAP-CABLE  
4. 236-2453 [1] HARNESS AS-CAB  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
 

#SEBP36620308
 

235-8317: WIRING GP-CAB

235-8317 WIRING GP-CAB
S/N JCD282-342; JNK236-337
PART OF 235-8328, 235-8329, 236-6500, 239-0114, 240-5083, 245-1063 CAB GP
ALSO AN ATTACHMENT
i02174976 SEBP3662
2358317 WIRING GP-CAB Parts scheme
  For full view, you need register

Parts for your 330C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 161-3932 [1] METER GP-SERVICE  
2. 9W-0335 [1] LIGHTER AS-CIGAR (24-VOLT)  
3. 4I-3064 E GUARD (10CM)  
4. 163-6795 [13] STRAP-CABLE  
5. 233-1036 [1] HARNESS AS-CAB  
  102-8802 [3] KIT-RECEPTACLE (2-PIN)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
  102-8806 [3] KIT-RECEPTACLE (8-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2272 [1] PLUG AS-CONNECTOR (4-PIN)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2265 [4] KIT-CONNECTING PLUG (8-PIN)  
  155-2270 [4] KIT-CONNECTING PLUG (2-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
6. 8T-6693 M [2] SCREW-MACHINE (M5X0.8X16-MM)  
7. 8T-0328 [6] WASHER-HARD (5.5X10X1-MM THK)  
9. 7Y-5226 M [2] NUT (M5X0.8-THD)  
10. 095-0736 M [2] SCREW-MACHINE (M5X0.8X10-MM)  
11. 096-5962 [2] WASHER-HARD (3.4X7X0.8-MM THK)  
12. 163-6701 [1] PANEL AS-CONTROL  
13. 132-1829 Y [1] ALARM GP (24-VOLT)(FAULT)  
14. 8T-4171 M [1] BOLT (M6X1X12-MM)  
15. 9X-8256 [1] WASHER (6.6X12X2-MM THK)  
16. 7K-1181 B [1] STRAP-CABLE  
17. 6V-9669 M [2] SCREW-MACHINE (M3X0.5X8-MM)  
18. 3C-6969 M [2] NUT (M3X0.5-THD)  
19. 3E-9872 M [1] SCREW AS (M4X0.7X12-MM)  
20. 111-4846 [1] CABLE  
21. 6C-3431 [1] ANTENNA  
22. 6C-9077 [1] WASHER  
23. 188-7681 [1] CONTROL GP-WIPER  
24. 5C-2874 M [2] NUT (M5X0.8-THD)  
25. 6C-9081 [2] LOCKWASHER  
26. 176-1919 [1] HARNESS AS-PANEL  
27. 157-3210 [1] PANEL AS-CONTROL  
28. 8T-0286 M [2] BOLT (M5X0.8X8-MM)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36620309
 

235-8317: WIRING GP-CAB

235-8317 WIRING GP-CAB
S/N JCD343-UP; JNK338-UP
PART OF 235-8329, 239-0114, 240-5083, 245-1063 CAB GP
AN ATTACHMENT
i02605764 SEBP3662
2358317 WIRING GP-CAB Parts scheme
  For full view, you need register

Parts for your 330C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 268-1964 [1] KIT-SERVICE METER (STEERING CONSOLE)  
    (INCLUDES METER & FILM)
2. 9W-0335 [1] LIGHTER AS-CIGAR (24-VOLT)  
3. 4I-3064 E GUARD (10-CM)  
4. 163-6795 [13] STRAP-CABLE  
5. 268-7620 C [1] HARNESS AS-CAB  
  5P-6271 [1] CONNECTOR AS  
  3S-2093 [56] STRAP-CABLE  
  102-8802 [3] KIT-RECEPTACLE (2-PIN)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
  102-8806 [3] KIT-RECEPTACLE (8-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2265 [4] KIT-CONNECTING PLUG (8-PIN)  
  155-2270 [4] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
6. 8T-6693 M [2] SCREW-MACHINE (M5X0.8X16-MM)  
7. 8T-0328 [6] WASHER-HARD (5.5X10X1-MM THK)  
9. 7Y-5226 M [2] NUT (M5X0.8-THD)  
10. 095-0736 M [2] SCREW-MACHINE (M5X0.8X10-MM)  
11. 096-5962 [2] WASHER-HARD (3.4X7X0.8-MM THK)  
12. 163-6701 [1] PANEL AS-CONTROL  
13. 132-1829 Y [1] ALARM GP (24-VOLT)(FAULT)  
14. 8T-4171 M [1] BOLT (M6X1X12-MM)  
15. 9X-8256 [1] WASHER (6.6X12X2-MM THK)  
16. 7K-1181 B [1] STRAP-CABLE  
17. 6V-9669 M [2] SCREW-MACHINE (M3X0.5X8-MM)  
18. 3C-6969 M [2] NUT (M3X0.5-THD)  
19. 3E-9872 M [1] SCREW AS (M4X0.7X12-MM)  
20. 111-4846 [1] CABLE  
21. 6C-3431 [1] ANTENNA  
22. 6C-9077 [1] WASHER  
23. 328-0651 [1] CONTROL GP-WIPER  
24. 5C-2874 M [2] NUT (M5X0.8-THD)  
25. 6C-9081 [2] LOCKWASHER  
26. 176-1919 [1] HARNESS AS-PANEL  
27. 157-3210 [1] PANEL AS-CONTROL  
28. 8T-0286 M [2] BOLT (M5X0.8X8-MM)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
Electric Starting System - Test
C-9 Engines for Caterpillar Built Machines
Troubleshooting
CID 0168 FMI 01 System Voltage Low
C-9 Engine for Caterpillar Built Machines
CID 0168 FMI 00 System Voltage High
C-9 Engine for Caterpillar Built Machines
CID 0263 FMI 03 Digital Sensor Supply short to +batt
C-9 Engine for Caterpillar Built Machines
CID 0263 FMI 04 Digital Sensor Supply short to ground
C-9 Engine for Caterpillar Built Machines
Electrical Connectors - Inspect
C-9 Engine for Caterpillar Built Machines
CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C-9 Engine for the 973C Track-Type Loader
CID 0100 FMI 04 Engine Oil Pressure short to ground
C-9 Engine for Caterpillar Built Machines
CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C-9 Engine for Caterpillar Built Machines
CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C-9 Engine for the 973C Track-Type Loader
CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C-9 Engine for the 973C Track-Type Loader
CID 0273 FMI 03 Turbo Outlet Pressure open/short to +batt
C-9 Engine for Caterpillar Built Machines
CID 0273 FMI 04 Turbo Outlet Pressure short to ground
C-9 Engine for Caterpillar Built Machines
CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C-9 Engine for Caterpillar Built Machines
CID 0274 FMI 04 Atmospheric Pressure short to ground
C-9 Engine for Caterpillar Built Machines
CID 0041 FMI 04 8 Volt DC Supply short to ground
C-9 Engine for Caterpillar Built Machines
CID 0248 FMI 09 Cat Data Link not communicating
C-9 Engine for Caterpillar Built Machines
CID 0042 FMI 11 Inject Actuation Control Valve open/short
C-9 Engine for Caterpillar Built Machines
CID 0094 FMI 03 Fuel Pressure open/short to +batt
C-9 Engine for Caterpillar Built Machines
CID 0094 FMI 04 Fuel Pressure short to ground
C-9 Engine for Caterpillar Built Machines
CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
C-9 Engine for Caterpillar Built Machines
CID 0110 FMI 04 Engine Coolant Temperature short to ground
C-9 Engine for Caterpillar Built Machines
CID 0164 FMI 00 High Injector Actuation Pressure
C-9 Engine for Caterpillar Built Machines
CID 0164 FMI 03 Injector Actuation Pressure voltage high
C-9 Engine for the 973C Track-Type Loader
CID 0175 FMI 03 Engine Oil Temperature open/short to +batt
C-9 Engine for the 973C Track-Type Loader
CID 0175 FMI 04 Engine Oil Temperature short to ground
C-9 Engine for the 973C Track-Type Loader
CID 0267 FMI 02 Incorrect Engine Shutdown Switch inputs
C-9 Engine for Caterpillar Built Machines
CID 0041 FMI 03 8 Volt DC Supply short to +batt
C-9 Engine for Caterpillar Built Machines
How To Use the Functional Tests
C-9 Engine for Caterpillar Built Machines
Air Inlet Heater Circuit - Test
C-9 Engine for Caterpillar Built Machines
CID 0164 FMI 11 Injector Actuation Pressure system fault
C-9 Engine for Caterpillar Built Machines
CID 0190 FMI 02 Loss of Engine Speed Signal
C-9 Engine for the 973C Track-Type Loader
CID 0190 FMI 11 Engine Speed Sensor mechanical failure
C-9 Engine for Caterpillar Built Machines
CID 0617 FMI 05 Air Inlet Heater Relay open/current below normal
C-9 Engine for the 973C Track-Type Loader
Cat Data Link Circuit - Test
C-9 Engine for Caterpillar Built Machines
Electrical Power Supply Circuit - Test
C-9 Engine for Caterpillar Built Machines
Engine Pressure Sensor Open or Short Circuit - Test
C-9 Engine for Caterpillar Built Machines
Engine Shutdown Switch Circuit - Test
C-9 Engine for Caterpillar Built Machines
CID 0275 FMI 03 Right Turbo Inlet Pressure open/short to +batt
C-9 Engine for Caterpillar Built Machines
CID 0275 FMI 04 Right Turbo Inlet Pressure short to ground
C-9 Engine for Caterpillar Built Machines
CID 0164 FMI 02 Injector Actuation Pressure signal erratic
C-9 Engine for the 973C Track-Type Loader
CID 0342 FMI 02 Loss of Secondary Engine Speed signal
C-9 Engine for Caterpillar Built Machines
CID 0091 FMI 02 Incorrect Throttle Switch inputs
C-9 Engine for the 973C Track-Type Loader
CID 0175 FMI 03 Engine Oil Temperature open/short to +batt
C-9 Engine for Caterpillar Built Machines
CID 0175 FMI 04 Engine Oil Temperature short to ground
C-9 Engine for Caterpillar Built Machines
CID 0320 FMI 02 Speed/Timing Sensor Loss of Signal
C-9 Engine for Caterpillar Built Machines
Injection Actuation Pressure Control Valve Circuit - Test
C-9 Engine for Caterpillar Built Machines
CID 0164 FMI 04 Injector Actuation Pressure voltage low
C-9 Engine for the 973C Track-Type Loader
CID 0342 FMI 11 Secondary Engine Speed Sensor mechanical failure
C-9 Engine for the 973C Track-Type Loader
CID 1715 FMI 03 Engine Oil Temperature Sensor #2 short to +batt
C-9 Engine for Caterpillar Built Machines
CID 1715 FMI 04 Engine Oil Temperature Sensor #2 short to ground
C-9 Engine for Caterpillar Built Machines
Engine Pressure Sensor Open or Short Circuit - Test
C-9 Engine for the 973C Track-Type Loader
Sensors and Electrical Connectors
C-9 Engine for Caterpillar Built Machines
5 Volt Engine Pressure Sensor Supply Circuit - Test
C-9 Engine for Caterpillar Built Machines
Analog Sensor Supply Circuit - Test
C-9 Engine for Caterpillar Built Machines
Digital Sensor Supply Circuit - Test
C-9 Engine for Caterpillar Built Machines
Engine Speed/Timing Sensor Circuit - Test
C-9 Engine for Caterpillar Built Machines
Throttle Position Sensor Circuit - Test
C-9 Engine for Caterpillar Built Machines
Throttle Switch Circuit - Test
C-9 Engine for the 973C Track-Type Loader
CID 0444 FMI 03 Start Relay short to +batt
C-9 Engine for the 973C Track-Type Loader
CID 0444 FMI 05 Start Relay open circuit
C-9 Engine for the 973C Track-Type Loader
CID 0444 FMI 06 Start Relay short to ground
C-9 Engine for the 973C Track-Type Loader
Start Relay Circuit - Test
C-9 Engine for the 973C Track-Type Loader
Sensors and Electrical Connectors
C-9 Engine for the 973C Track-Type Loader
CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C-9 Engine for the 973C Track-Type Loader
CID 0274 FMI 04 Atmospheric Pressure short to ground
C-9 Engine for the 973C Track-Type Loader
Engine Wiring Information
C-9 Engine for Caterpillar Built Machines
User Defined Shutdown Input Circuit - Test
C-9 Engine for Caterpillar Built Machines
CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C-9 Engine for Caterpillar Built Machines
CID 0617 FMI 06 Air Inlet Heater Relay grounded/current above norm
C-9 Engine for Caterpillar Built Machines
Service Magazine
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04
A New Engine Oil Grade Plug 0W20 Is Now Available {1408}
2002/04/22
Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/12
Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08
Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Caterpillar Parts SIS Catalog 330C :

WIRING GP-BOOM
214-5104 WIRING GP-BOOM
WARNING GP-STABILITY
217-6007 WARNING GP-STABILITY
WARNING GP-STABILITY
217-6007 WARNING GP-STABILITY
WARNING GP-STABILITY
217-6007 WARNING GP-STABILITY
SWITCH GP-START
9G-7641 SWITCH GP-START
SWITCH GP-ROTARY
106-0107 SWITCH GP-ROTARY
SWITCH GP-REFUELING
5C-6108 SWITCH GP-REFUELING
SWITCH GP-MAGNETIC
398-0940 SWITCH GP-MAGNETIC
WIRING GP-BOOM FLOAT
193-3405 WIRING GP-BOOM FLOAT
WIRING GP-BOOM FLOAT
193-3405 WIRING GP-BOOM FLOAT
WIRING GP-BOOM FLOAT
193-3405 WIRING GP-BOOM FLOAT
WIRING GP-CAB
184-7622 WIRING GP-CAB
WIRING GP-CAB
211-7989 WIRING GP-CAB
WIRING GP-CAB
211-7989 WIRING GP-CAB
WIRING GP-CAB
235-1748 WIRING GP-CAB
WIRING GP-CAB
235-8317 WIRING GP-CAB

Truck sale:

Caterpillar 330C
 
Caterpillar 330C
- Crawler Excavators
CGT - COMPAGNIA GENERALE TRATTORI
 
375,750 
Caterpillar 330 CF, Crawler Excavators, Construction
- Crawler Excavators
WHEELER MACHINERY CO.
Caterpillar 330 CF, Crawler Excavators, Construction
379,533 
Caterpillar 330 CF, Crawler Excavators, Construction
- Crawler Excavators
WHEELER MACHINERY CO.
 
372,345 
Caterpillar 330 CF, Crawler Excavators, Construction
- Crawler Excavators
WHEELER MACHINERY CO.
 
330,000 
Caterpillar 330 CF, Crawler Excavators, Construction
- Crawler Excavators
WHEELER MACHINERY CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.