AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

170-6909 WIRING GP-CONSOLE -LH S/N JCD1-UP; JNK1-UP PART OF 186-4628 WIRING GP-CONSOLE ALSO AN ATTACHMENT 330C


ELECTRICAL AND STARTING SYSTEM
WIRING GP

EXCAVATOR 330C EXCAVATOR JCD
 330C & 330C L Excavators JCD00001-UP (MACHINE) POWERED BY C-9 Engine SEBP3662 330C JCD   (2001)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-COLD WEATHER
221-1024 WIRING GP-COLD WEATHER
WIRING GP-COLD WEATHER
221-1024 WIRING GP-COLD WEATHER
WIRING GP-CONSOLE
170-6909 WIRING GP-CONSOLE
WIRING GP-CONSOLE
186-4572 WIRING GP-CONSOLE
WIRING GP-CONSOLE
186-4572 WIRING GP-CONSOLE
186-4628 WIRING GP-CONSOLE
 

#SEBP36620320
 

170-6909: WIRING GP-CONSOLE

170-6909 WIRING GP-CONSOLE -LH
S/N JCD1-UP; JNK1-UP
PART OF 186-4628 WIRING GP-CONSOLE
ALSO AN ATTACHMENT
i01240043 SEBP3662
1706909 WIRING GP-CONSOLE Parts scheme
  For full view, you need register

Parts for your 330C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 170-6959 [1] HARNESS AS-OPERATOR CONTROLS (CONSOLE)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8805 [2] KIT-RECEPTACLE (6-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  3S-2093 [5] STRAP-CABLE  
  155-2274 [2] KIT-CONNECTING PLUG (6-PIN)  
    (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
2. 7K-1181 [1] STRAP-CABLE  
3. 163-6795 [1] STRAP-CABLE  
4. 3S-2093 [1] STRAP-CABLE  
 

#SEBP36620321
 

186-4572: WIRING GP-CONSOLE

186-4572 WIRING GP-CONSOLE -RH
S/N JCD1-UP; JNK1-219
PART OF 186-4628 WIRING GP-CONSOLE
ALSO AN ATTACHMENT
i01481245 SEBP3662
1864572 WIRING GP-CONSOLE Parts scheme
  For full view, you need register

Parts for your 330C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 163-6795 [1] STRAP-CABLE  
2. 6V-5738 D TRIM-EDGE (0.2-M)  
3. 163-6710 [1] SWITCH AS-TOGGLE (AEC AUTO/MANUAL)  
4. 163-6711 [1] SWITCH AS-TOGGLE (BACK-UP THROTTLE)  
5. 224-5059 [1] HARNESS AS-CONSOLE (RH)  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
  155-2274 [2] KIT-CONNECTING PLUG (6-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS & WEDGE)
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
  102-8801 KIT-RECEPTACLE (12-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
6. 9G-7641 Y [1] SWITCH GP-START (ENGINE, KEY)  
7. 163-6702 [1] PANEL AS  
  170-9324 [1] LAMP AS-INDICATOR (24-VOLT, 3-WATT)  
9. 106-0107 Y [1] SWITCH GP-ROTARY (THROTTLE POSITION)  
10. 170-6828 [1] HARNESS AS-SWITCH (ENGINE START)  
11. 119-5026 [4] SCREW-PAN HEAD (10-16X0.63-IN)  
12. 3S-2093 [3] STRAP-CABLE  
13. 7K-1181 [2] STRAP-CABLE  
14. 185-9208 [1] KNOB AS  
  D   ORDER BY THE METER
  Y   SEPARATE ILLUSTRATION
 

#SEBP36620322
 

186-4572: WIRING GP-CONSOLE

186-4572 WIRING GP-CONSOLE -RH
S/N JCD1-UP; JNK220-UP
PART OF 186-4628 WIRING GP-CONSOLE
ALSO AN ATTACHMENT
i02218394 SEBP3662
1864572 WIRING GP-CONSOLE Parts scheme
  For full view, you need register

Parts for your 330C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 163-6795 [1] STRAP-CABLE  
2. 6V-5738 D TRIM-EDGE (0.2-M)  
3. 283-3074 [1] SWITCH AS-TOGGLE (AEC AUTO/MANUAL)  
4. 163-6711 [1] SWITCH AS-TOGGLE (BACK-UP THROTTLE)  
5. 231-5805 C [1] HARNESS AS-CONSOLE (RH)  
  3S-2093 [11] STRAP-CABLE  
  7K-1181 [1] STRAP-CABLE  
  7Y-3957 [1] CONNECTOR-PLUG (4-PIN)  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
  155-2274 [2] KIT-CONNECTING PLUG (6-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
6. 9G-7641 Y [1] SWITCH GP-START (ENGINE, KEY)  
7. 200-2555 C [1] PANEL  
8. 200-2556 C [1] PLATE  
9. 106-0107 Y [1] SWITCH GP-ROTARY (THROTTLE POSITION)  
10. 170-6828 [1] HARNESS AS-SWITCH (ENGINE START)  
11. 119-5026 [4] SCREW-PAN HEAD (10-16X0.63-IN)  
12. 3S-2093 [2] STRAP-CABLE  
13. 7K-1181 [2] STRAP-CABLE  
14. 185-9208 [1] KNOB AS (THROTTLE POSITION)  
15. 8T-4223 C [1] WASHER-HARD (13.5X25.5X3-MM THK)  
16. 097-5812 C [1] SPACER (26X32X2-MM THK)  
17. 220-5815 C [6] SCREW-PAN HEAD  
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  Y   SEPARATE ILLUSTRATION
 

#SEBP36620323
 

186-4628: WIRING GP-CONSOLE

186-4628 WIRING GP-CONSOLE
S/N JCD1-UP; JNK1-UP
PART OF 206-8076, 216-4316 OPERATOR AR
ALSO AN ATTACHMENT
i01480783 SEBP3662
  For full view, you need register

Parts for your 330C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  170-6909 Y [1] WIRING GP-CONSOLE (LH)  
  186-4572 Y [1] WIRING GP-CONSOLE (RH)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP36620324
 

217-6003: WIRING GP-CONTROL

217-6003 WIRING GP-CONTROL
S/N JCD1-UP; JNK1-UP
TILT CAB
PART OF 238-6262 CAB AR, 216-5607 HYDRAULIC AR, 269-3818 TILT AR-CAB
AN ATTACHMENT
i01711572 SEBP3662
2176003 WIRING GP-CONTROL Parts scheme
  For full view, you need register

Parts for your 330C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4196 M [7] BOLT (M10X1.5X35-MM)  
2. 111-4838 [8] CLIP  
3. 111-4839 [10] STRAP  
4. 235-4401 [1] HARNESS AS-OPERATOR CONTROLS (JOYSTICK, PEDALS)  
  3S-2093 [3] STRAP-CABLE  
  102-8804 [3] KIT-RECEPTACLE (4-PIN)  
  102-8805 [5] KIT-RECEPTACLE (6-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2271 [2] KIT-CONNECTING PLUG (4-PIN)  
  155-2274 [3] KIT-CONNECTING PLUG (6-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
5. 235-4421 [1] HARNESS AS-SWITCH (SMARTBOOM, FLOAT)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
6. 7K-1181 B [40] STRAP-CABLE  
7. 4I-7889 [1] SPACER (11X25X45-MM THK)  
8. 8T-4178 M [1] BOLT (M10X1.5X90-MM)  
9. 8T-4172 M [1] BOLT (M10X1.5X80-MM)  
10. 235-2661 [1] HARNESS AS-CONTROL (ENGINE, PUMP)  
  3S-2093 [5] STRAP-CABLE  
  102-8801 [3] KIT-RECEPTACLE (12-PIN)  
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2255 [3] KIT-CONNECTING PLUG (12-PIN)  
  155-2265 [1] KIT-CONNECTING PLUG (8-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
11. 218-2212 [1] HARNESS AS-BOX  
  3S-2093 [3] STRAP-CABLE  
  102-8801 [2] KIT-RECEPTACLE (12-PIN)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2255 [2] KIT-CONNECTING PLUG (12-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP36620325
 

204-3604: WIRING GP-ELECTRONIC CONTROL

204-3604 WIRING GP-ELECTRONIC CONTROL
S/N 4ZF1-4114
PART OF 211-5020 ENGINE AR
ALSO AN ATTACHMENT
i01538036 SEBP3662
2043604 WIRING GP-ELECTRONIC CONTROL Parts scheme
  For full view, you need register

Parts for your 330C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [15] STRAP-CABLE  
2. 6V-4369 [1] CLIP  
3. 003-9835 [2] PROTECTOR  
4. 110-8457 [1] BOOT  
5. 112-6646 M [1] LOCKNUT (M6X1-THD)  
6. 148-0757 [1] SWITCH GP-MAGNETIC (24-VOLT)(AIR INLET HEATER)  
7. 147-0286 [1] WIRE AS  
8. 188-9865 [1] HARNESS AS-ENGINE (FUEL INJECTOR)  
  3S-2093 [5] STRAP-CABLE  
  105-1797 [5] MOUNT  
  191-7823 [1] RECEPTACLE AS  
9. 201-1283 [1] HARNESS AS-CONTROL (ENGINE ELECTRONIC, LOWER)  
  214-7170 J [1] KIT-REPAIR (ELECTRICAL CONNECTORS)(FOR EXTREME COLD CLIMATES)  
    (INCLUDES:)
  102-8803 [2] KIT-RECEPTACLE (3-PIN)  
  3E-3371 [2] WEDGE-RECEPTACLE LOCK (3-PIN)  
  8T-8737 [8] PLUG-SEAL  
  155-2276 [3] WEDGE-PLUG LOCK (3-PIN)  
  155-2260 [3] KIT-CONNECTING PLUG (3-PIN)  
  194-5226 [7] WIRE AS (16-GA)  
  102-8802 [2] KIT-RECEPTACLE (2-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
  102-8803 [2] KIT-RECEPTACLE (3-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
  100-3320 [1] PLUG AS-CONNECTOR (2-PIN)  
  126-5011 [1] SEAL-CONNECTOR  
  111-2416 [1] PLUG AS-CONNECTOR (2-PIN)  
  126-5011 [1] SEAL-CONNECTOR  
  155-2270 [5] KIT-CONNECTING PLUG (2-PIN)  
    (EACH INCLUDES PLUG AS & WEDGE)
  160-7690 [1] PLUG AS-CONNECTOR (70-PIN)  
  159-9322 [1] SEAL-O-RING  
  155-2260 [4] KIT-CONNECTING PLUG (3-PIN)  
    (EACH INCLUDES PLUG AS & WEDGE)
11. 4P-7428 [1] CLIP (LADDER)  
12. 4P-7429 [1] CLIP (LADDER)  
13. 4P-7581 [4] CLIP (LADDER)  
14. 4P-8134 [1] CLIP (LADDER)  
15. 6V-5215 M [1] BOLT (M8X1.25X16-MM)  
18. 7I-2272 M [2] BOLT (M5X0.8X12-MM)  
19. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
20. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
21. 8T-4970 M [2] BOLT (M6X1X14-MM)  
22. 8T-5451 M [1] BOLT (M6X1X12-MM)  
23. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
24. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
  J   KIT MARKED "J" PROVIDES OIL GRADE PLUGS FOR 0W20, 10W30, 15W40 OIL GRADES
  M   METRIC PART
 

#SEBP36620326
 

204-3604: WIRING GP-ELECTRONIC CONTROL

204-3604 WIRING GP-ELECTRONIC CONTROL
S/N 4ZF4115-5892
PART OF 211-5020 ENGINE AR
ALSO AN ATTACHMENT
i01844193 SEBP3662
2043604 WIRING GP-ELECTRONIC CONTROL Parts scheme
  For full view, you need register

Parts for your 330C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [15] STRAP-CABLE  
3. 188-9865 [1] HARNESS AS-ENGINE (FUEL INJECTOR)  
  3S-2093 [5] STRAP-CABLE  
  105-1797 [5] MOUNT  
  191-7823 [1] RECEPTACLE AS  
4. 201-1283 [1] HARNESS AS-CONTROL (ENGINE ELECTRONIC, LOWER)  
  214-7170 L [1] KIT-REPAIR (ELECTRICAL CONNECTORS)(FOR EXTREME COLD CLIMATES)  
  102-8803 [2] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  3E-3371 [2] WEDGE-RECEPTACLE LOCK (3-PIN)  
  8T-8737 [8] PLUG-SEAL  
  155-2276 [3] WEDGE-PLUG LOCK (3-PIN)  
  155-2260 [3] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS & WEDGE)
  194-5226 [8] WIRE AS (16-GA)  
  102-8802 [2] KIT-RECEPTACLE (2-PIN)  
    INCLUDES WEDGE & RECEPTACLE
  102-8803 [3] KIT-RECEPTACLE (3-PIN)  
    INCLUDES WEDGE & RECEPTACLE
  100-3320 [1] PLUG AS-CONNECTOR (2-PIN)  
  111-2416 [1] PLUG AS-CONNECTOR (2-PIN)  
5. 223-4453 C [1] SWITCH GP-MAGNETIC (24-VOLT)(AIR INLET HEATER)  
6. 117-7032 C [1] WIRE AS  
7. 193-9141 C [2] COVER-TERMINAL  
8. 3E-4353 C [2] WASHER-HARD (11X25X3-MM THK)  
9. 4P-7428 [1] CLIP (LADDER)  
10. 4P-7429 [1] CLIP (LADDER)  
11. 4P-7581 [4] CLIP (LADDER)  
12. 4P-8134 [1] CLIP (LADDER)  
13. 6V-4369 [1] CLIP  
14. 6V-5215 M [1] BOLT (M8X1.25X16-MM)  
15. 6V-6317 CM [2] BOLT (M10X1.5X20-MM)  
16. 7I-2272 M [2] BOLT (M5X0.8X12-MM)  
17. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
18. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
19. 8T-5451 M [1] BOLT (M6X1X12-MM)  
20. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  L   KIT MARKED "L" PROVIDES OIL GRADE PLUGS FOR 0W20, 10W30, 15W40 OIL GRADES
  M   METRIC PART
 

#SEBP36620327
 

204-3604: WIRING GP-ELECTRONIC CONTROL

204-3604 WIRING GP-ELECTRONIC CONTROL
S/N 4ZF5893-7985
PART OF 211-5020 ENGINE AR
ALSO AN ATTACHMENT
i01985697 SEBP3662
2043604 WIRING GP-ELECTRONIC CONTROL Parts scheme 2043604 WIRING GP-ELECTRONIC CONTROL Parts scheme
  For full view, you need register

Parts for your 330C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 C [24] STRAP-CABLE  
3. 188-9865 [1] HARNESS AS-ENGINE (FUEL INJECTOR)  
  3S-2093 [5] STRAP-CABLE  
  105-1797 [5] MOUNT  
  191-7823 [5] RECEPTACLE AS  
4. 226-0903 C [1] CABLE AS  
5. 230-6279 C [1] HARNESS AS-ENGINE (ELECTRONIC CONTROL)  
  214-7170 L [1] KIT-REPAIR (ELECTRICAL CONNECTORS)(FOR EXTREME COLD CLIMATES)  
  102-8803 [2] KIT-RECEPTACLE (3-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
  3E-3371 [2] WEDGE-RECEPTACLE LOCK (3-PIN)  
  8T-8737 [8] PLUG-SEAL  
  155-2276 [3] WEDGE-PLUG LOCK (3-PIN)  
  155-2260 [3] KIT-CONNECTING PLUG (3-PIN)  
    (EACH INCLUDES PLUG AS & WEDGE)
  194-5226 [8] WIRE AS (16-GA)  
  102-8802 [2] KIT-RECEPTACLE (2-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
  102-8803 [3] KIT-RECEPTACLE (3-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
  100-3320 [1] PLUG AS-CONNECTOR (2-PIN)  
  126-5011 [1] SEAL-CONNECTOR  
  111-2416 [1] PLUG AS-CONNECTOR (2-PIN)  
  126-5011 [1] SEAL-CONNECTOR  
  8T-8737 [35] PLUG-SEAL  
  3S-2093 [3] STRAP-CABLE  
  155-2270 [4] KIT-CONNECTING PLUG (2-PIN)  
  160-7690 [1] PLUG AS-CONNECTOR (70-PIN)  
6. 223-4453 Y [1] SWITCH GP-MAGNETIC (24-VOLT)(AIR INLET HEATER)  
7. 3E-4353 [2] WASHER-HARD (11X25X3-MM THK)  
8. 4P-7581 C [5] CLIP (LADDER)  
9. 4P-8134 C [3] CLIP (LADDER)  
10. 5P-7970 CM [1] NUT (M8X1.25-THD)  
11. 6V-4369 [1] CLIP  
12. 6V-5839 C [3] WASHER (11X21X2.5-MM THK)  
13. 6V-6317 CM [4] BOLT (M10X1.5X20-MM)  
14. 7I-2272 M [2] BOLT (M5X0.8X12-MM)  
15. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
16. 8T-4137 CM [1] BOLT (M10X1.5X20-MM)  
17. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
18. 8T-5451 M [1] BOLT (M6X1X12-MM)  
19. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  L   KIT MARKED "L" PROVIDES OIL GRADE PLUGS FOR 0W20, 10W30, 15W40 OIL GRADES
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36620328
 

204-3604: WIRING GP-ELECTRONIC CONTROL

204-3604 WIRING GP-ELECTRONIC CONTROL
S/N 4ZF7986-UP; SAN1-UP
PART OF 211-5020, 235-4129 ENGINE AR
ALSO AN ATTACHMENT
i02085667 SEBP3662
2043604 WIRING GP-ELECTRONIC CONTROL Parts scheme
  For full view, you need register

Parts for your 330C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [24] STRAP-CABLE  
3. 215-3249 C [1] HARNESS AS-ENGINE (UNIT INJECTOR)  
  3S-2093 [5] STRAP-CABLE  
  191-7823 [1] RECEPTACLE AS  
    (INCLUDES PLUG AS & WEDGE)
4. 226-0903 [1] CABLE AS  
5. 230-6279 [1] HARNESS AS-ENGINE (ENGINE ELECTRONIC-LOWER)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
  6I-4347 [4] BOOT (4-PIN)  
  100-3320 [1] PLUG AS-CONNECTOR (2-PIN)  
  111-2416 [1] PLUG AS-CONNECTOR (2-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  160-7690 [1] PLUG AS-CONNECTOR (70-PIN)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  214-7170 L [1] KIT-REPAIR (ELECTRICAL CONNECTORS)  
    (FOR EXTREME COLD CLIMATES)
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
  3E-3371 [2] WEDGE-RECEPTACLE LOCK (3-PIN)  
  8T-8737 [8] PLUG-SEAL  
  155-2276 [3] WEDGE-PLUG LOCK (3-PIN)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  194-5226 [1] WIRE AS (16-GA)  
  194-5227 [1] WIRE AS (14-GA)  
6. 223-4453 Y [1] SWITCH GP-MAGNETIC (24-VOLT)(STARTING AID HEATER)  
7. 3E-4353 [2] WASHER-HARD (11X25X3-MM THK)  
8. 4P-7581 [5] CLIP (LADDER)  
9. 4P-8134 [3] CLIP (LADDER)  
10. 5P-7970 M [1] NUT (M8X1.25-THD)  
11. 6V-4369 [1] CLIP  
12. 6V-5839 [3] WASHER (11X21X2.5-MM THK)  
13. 6V-6317 M [4] BOLT (M10X1.5X20-MM)  
14. 7I-2272 M [2] BOLT (M5X0.8X12-MM)  
15. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
16. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
17. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
18. 8T-5451 M [1] BOLT (M6X1X12-MM)  
19. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  L   KIT MARKED "L" PROVIDES OIL GRADE PLUGS FOR 0W20, 10W30, 15W40 OIL GRADES
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36620329
 

204-3604: WIRING GP-ELECTRONIC CONTROL

204-3604 WIRING GP-ELECTRONIC CONTROL
S/N 4ZF1-UP; 7AZ1-UP
PART OF 211-5020, 235-4129 ENGINE AR
ALSO AN ATTACHMENT
i02556237 SEBP3662
2043604 WIRING GP-ELECTRONIC CONTROL Parts scheme
  For full view, you need register

Parts for your 330C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [25] STRAP-CABLE  
3. 215-3249 Y [1] HARNESS AS-ENGINE (UNIT INJECTOR)  
4. 226-0903 [1] CABLE AS  
5. 230-6279 Y [1] HARNESS AS-ENGINE (ECM)  
6. 209-5582 CY [1] SWITCH GP-MAGNETIC (24-VOLT)(STARTING AID HEATER)  
7. 208-9277 CM [2] BOLT-FLANGE HEAD (M6X1X20-MM)  
8. 4P-7581 [5] CLIP (LADDER)  
9. 4P-8134 [3] CLIP (LADDER)  
10. 5P-7970 M [1] NUT (M8X1.25-THD)  
11. 6V-4369 [1] CLIP  
12. 6V-5839 C [4] WASHER (11X21X2.5-MM THK)  
13. 6V-6317 CM [3] BOLT (M10X1.5X20-MM)  
14. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
15. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
16. 7I-2272 M [2] BOLT (M5X0.8X12-MM)  
17. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
18. 8T-5451 M [1] BOLT (M6X1X12-MM)  
19. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
20. 283-1226 C [1] BRACKET AS  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
Electric Starting System - Test
C-9 Engines for Caterpillar Built Machines
Troubleshooting
CID 0168 FMI 01 System Voltage Low
C-9 Engine for Caterpillar Built Machines
CID 0168 FMI 00 System Voltage High
C-9 Engine for Caterpillar Built Machines
CID 0263 FMI 03 Digital Sensor Supply short to +batt
C-9 Engine for Caterpillar Built Machines
CID 0263 FMI 04 Digital Sensor Supply short to ground
C-9 Engine for Caterpillar Built Machines
Electrical Connectors - Inspect
C-9 Engine for Caterpillar Built Machines
CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C-9 Engine for the 973C Track-Type Loader
CID 0100 FMI 04 Engine Oil Pressure short to ground
C-9 Engine for Caterpillar Built Machines
CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C-9 Engine for Caterpillar Built Machines
CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C-9 Engine for the 973C Track-Type Loader
CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C-9 Engine for the 973C Track-Type Loader
CID 0273 FMI 03 Turbo Outlet Pressure open/short to +batt
C-9 Engine for Caterpillar Built Machines
CID 0273 FMI 04 Turbo Outlet Pressure short to ground
C-9 Engine for Caterpillar Built Machines
CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C-9 Engine for Caterpillar Built Machines
CID 0274 FMI 04 Atmospheric Pressure short to ground
C-9 Engine for Caterpillar Built Machines
CID 0041 FMI 04 8 Volt DC Supply short to ground
C-9 Engine for Caterpillar Built Machines
CID 0248 FMI 09 Cat Data Link not communicating
C-9 Engine for Caterpillar Built Machines
CID 0042 FMI 11 Inject Actuation Control Valve open/short
C-9 Engine for Caterpillar Built Machines
CID 0094 FMI 03 Fuel Pressure open/short to +batt
C-9 Engine for Caterpillar Built Machines
CID 0094 FMI 04 Fuel Pressure short to ground
C-9 Engine for Caterpillar Built Machines
CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
C-9 Engine for Caterpillar Built Machines
CID 0110 FMI 04 Engine Coolant Temperature short to ground
C-9 Engine for Caterpillar Built Machines
CID 0164 FMI 00 High Injector Actuation Pressure
C-9 Engine for Caterpillar Built Machines
CID 0164 FMI 03 Injector Actuation Pressure voltage high
C-9 Engine for the 973C Track-Type Loader
CID 0175 FMI 03 Engine Oil Temperature open/short to +batt
C-9 Engine for the 973C Track-Type Loader
CID 0175 FMI 04 Engine Oil Temperature short to ground
C-9 Engine for the 973C Track-Type Loader
CID 0267 FMI 02 Incorrect Engine Shutdown Switch inputs
C-9 Engine for Caterpillar Built Machines
CID 0041 FMI 03 8 Volt DC Supply short to +batt
C-9 Engine for Caterpillar Built Machines
How To Use the Functional Tests
C-9 Engine for Caterpillar Built Machines
Air Inlet Heater Circuit - Test
C-9 Engine for Caterpillar Built Machines
CID 0164 FMI 11 Injector Actuation Pressure system fault
C-9 Engine for Caterpillar Built Machines
CID 0190 FMI 02 Loss of Engine Speed Signal
C-9 Engine for the 973C Track-Type Loader
CID 0190 FMI 11 Engine Speed Sensor mechanical failure
C-9 Engine for Caterpillar Built Machines
CID 0617 FMI 05 Air Inlet Heater Relay open/current below normal
C-9 Engine for the 973C Track-Type Loader
Cat Data Link Circuit - Test
C-9 Engine for Caterpillar Built Machines
Electrical Power Supply Circuit - Test
C-9 Engine for Caterpillar Built Machines
Engine Pressure Sensor Open or Short Circuit - Test
C-9 Engine for Caterpillar Built Machines
Engine Shutdown Switch Circuit - Test
C-9 Engine for Caterpillar Built Machines
CID 0275 FMI 03 Right Turbo Inlet Pressure open/short to +batt
C-9 Engine for Caterpillar Built Machines
CID 0275 FMI 04 Right Turbo Inlet Pressure short to ground
C-9 Engine for Caterpillar Built Machines
CID 0164 FMI 02 Injector Actuation Pressure signal erratic
C-9 Engine for the 973C Track-Type Loader
CID 0342 FMI 02 Loss of Secondary Engine Speed signal
C-9 Engine for Caterpillar Built Machines
CID 0091 FMI 02 Incorrect Throttle Switch inputs
C-9 Engine for the 973C Track-Type Loader
CID 0175 FMI 03 Engine Oil Temperature open/short to +batt
C-9 Engine for Caterpillar Built Machines
CID 0175 FMI 04 Engine Oil Temperature short to ground
C-9 Engine for Caterpillar Built Machines
CID 0320 FMI 02 Speed/Timing Sensor Loss of Signal
C-9 Engine for Caterpillar Built Machines
Injection Actuation Pressure Control Valve Circuit - Test
C-9 Engine for Caterpillar Built Machines
CID 0164 FMI 04 Injector Actuation Pressure voltage low
C-9 Engine for the 973C Track-Type Loader
CID 0342 FMI 11 Secondary Engine Speed Sensor mechanical failure
C-9 Engine for the 973C Track-Type Loader
CID 1715 FMI 03 Engine Oil Temperature Sensor #2 short to +batt
C-9 Engine for Caterpillar Built Machines
CID 1715 FMI 04 Engine Oil Temperature Sensor #2 short to ground
C-9 Engine for Caterpillar Built Machines
Engine Pressure Sensor Open or Short Circuit - Test
C-9 Engine for the 973C Track-Type Loader
Sensors and Electrical Connectors
C-9 Engine for Caterpillar Built Machines
5 Volt Engine Pressure Sensor Supply Circuit - Test
C-9 Engine for Caterpillar Built Machines
Analog Sensor Supply Circuit - Test
C-9 Engine for Caterpillar Built Machines
Digital Sensor Supply Circuit - Test
C-9 Engine for Caterpillar Built Machines
Engine Speed/Timing Sensor Circuit - Test
C-9 Engine for Caterpillar Built Machines
Throttle Position Sensor Circuit - Test
C-9 Engine for Caterpillar Built Machines
Throttle Switch Circuit - Test
C-9 Engine for the 973C Track-Type Loader
CID 0444 FMI 03 Start Relay short to +batt
C-9 Engine for the 973C Track-Type Loader
CID 0444 FMI 05 Start Relay open circuit
C-9 Engine for the 973C Track-Type Loader
CID 0444 FMI 06 Start Relay short to ground
C-9 Engine for the 973C Track-Type Loader
Start Relay Circuit - Test
C-9 Engine for the 973C Track-Type Loader
Sensors and Electrical Connectors
C-9 Engine for the 973C Track-Type Loader
CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C-9 Engine for the 973C Track-Type Loader
CID 0274 FMI 04 Atmospheric Pressure short to ground
C-9 Engine for the 973C Track-Type Loader
Engine Wiring Information
C-9 Engine for Caterpillar Built Machines
User Defined Shutdown Input Circuit - Test
C-9 Engine for Caterpillar Built Machines
CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C-9 Engine for Caterpillar Built Machines
CID 0617 FMI 06 Air Inlet Heater Relay grounded/current above norm
C-9 Engine for Caterpillar Built Machines
Service Magazine
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04
A New Engine Oil Grade Plug 0W20 Is Now Available {1408}
2002/04/22
Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/12
Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08
Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Caterpillar Parts SIS Catalog 330C :

WIRING GP-COLD WEATHER
221-1024 WIRING GP-COLD WEATHER
WIRING GP-COLD WEATHER
221-1024 WIRING GP-COLD WEATHER
WIRING GP-CHASSIS
227-7068 WIRING GP-CHASSIS
WIRING GP-CHASSIS
227-7068 WIRING GP-CHASSIS
WIRING GP-CHASSIS
193-3393 WIRING GP-CHASSIS
WIRING GP-CHASSIS
193-3393 WIRING GP-CHASSIS
WIRING GP-CHASSIS
193-3393 WIRING GP-CHASSIS
WIRING GP-CAB RISER
220-3147 WIRING GP-CAB RISER
WIRING GP-CONSOLE
186-4572 WIRING GP-CONSOLE
WIRING GP-CONSOLE
186-4572 WIRING GP-CONSOLE
186-4628 WIRING GP-CONSOLE
WIRING GP-CONTROL
217-6003 WIRING GP-CONTROL
WIRING GP-ELECTRONIC CONTROL
204-3604 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ELECTRONIC CONTROL
204-3604 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ELECTRONIC CONTROL
204-3604 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ELECTRONIC CONTROL
204-3604 WIRING GP-ELECTRONIC CONTROL

Truck sale:

Caterpillar 330C
 
Caterpillar 330C
- Crawler Excavators
CGT - COMPAGNIA GENERALE TRATTORI
 
375,750 
Caterpillar 330 CF, Crawler Excavators, Construction
- Crawler Excavators
WHEELER MACHINERY CO.
Caterpillar 330 CF, Crawler Excavators, Construction
379,533 
Caterpillar 330 CF, Crawler Excavators, Construction
- Crawler Excavators
WHEELER MACHINERY CO.
 
372,345 
Caterpillar 330 CF, Crawler Excavators, Construction
- Crawler Excavators
WHEELER MACHINERY CO.
 
330,000 
Caterpillar 330 CF, Crawler Excavators, Construction
- Crawler Excavators
WHEELER MACHINERY CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.