AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

217-6002 WIRING GP-PLATFORM -ULTRA-HIGH DEMOLITION S/N JCD1-UP; JNK1-UP PART OF 238-6262 CAB AR, 216-5607 HYDRAULIC AR, 269-3818 TILT AR-CAB Type 2 AN ATTACHMENT 330C


ELECTRICAL AND STARTING SYSTEM
WIRING GP
POWER TRAIN
DRIVE GP-FINAL

EXCAVATOR 330C EXCAVATOR JCD
 330C & 330C L Excavators JCD00001-UP (MACHINE) POWERED BY C-9 Engine SEBP3662 330C JCD   (2001)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-PLATFORM
217-6002 WIRING GP-PLATFORM
WIRING GP-PLATFORM
217-6002 WIRING GP-PLATFORM
WIRING GP-PLATFORM
217-6002 WIRING GP-PLATFORM
WIRING GP-QUICK COUPLER
204-6912 WIRING GP-QUICK COUPLER
WIRING GP-QUICK COUPLER
264-0216 WIRING GP-QUICK COUPLER
WIRING GP-REFUELING PUMP
163-6640 WIRING GP-REFUELING PUMP
 

#SEBP36620340
 

217-6002: WIRING GP-PLATFORM

217-6002 WIRING GP-PLATFORM -ULTRA-HIGH DEMOLITION
S/N JCD1-UP; JNK1-UP
PART OF 238-6262 CAB AR, 216-5607 HYDRAULIC AR, 269-3818 TILT AR-CAB
Type 2
AN ATTACHMENT
i02187211 SEBP3662
2176002 WIRING GP-PLATFORM Parts scheme 2176002 WIRING GP-PLATFORM Parts scheme
  For full view, you need register

Parts for your 330C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-6328 Y [1] ALARM GP (24-VOLT)  
2. 234-7628 C [1] HARNESS AS-CAB (TILT)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  121-1022 [2] DIODE  
  155-2260 [2] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
    (EACH PLUG AS INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
3. 163-6720 [1] SWITCH AS-ROCKER (CAB TILT)  
  167-3543 [5] TERMINAL (MALE)(MALE)  
  167-3542 [1] RECEPTACLE-CONNECTOR (5-PIN)  
4. 7K-1181 B [40] STRAP-CABLE  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP36620341
 

204-6912: WIRING GP-QUICK COUPLER

204-6912 WIRING GP-QUICK COUPLER
S/N JCD1-UP; JNK1-UP
PART OF 204-6883 CONTROL AR-COUPLER
AN ATTACHMENT
i01528286 SEBP3662
2046912 WIRING GP-QUICK COUPLER Parts scheme
  For full view, you need register

Parts for your 330C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
2. 7X-2619 M [4] BOLT (M6X1X10-MM)  
3. 155-2715 [1] SWITCH AS-ROTARY (QUICK COUPLER)  
  3E-3377 [1] WEDGE-RECEPTACLE LOCK (4-PIN)  
  186-3735 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
4. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
5. 207-4765 [1] BRACKET AS  
6. 161-3128 [1] RELAY (24-VOLT)(QUICK COUPLER LEVER, PRIORITY)  
6A. 161-3128 [1] RELAY (24-VOLT)(QUICK CPLR LEVER, ON POSITION)  
6B. 161-3128 [2] RELAY (24-VOLT)(QUICK CPLR, LOCK POSITION)  
7. 6V-8369 [1] NUT (7/16-28-THD)  
8. 2H-3920 [1] LOCKWASHER  
9. 158-4212 [1] FILM-INSTRUCTION (QUICK COUPLER)  
10. 134-0394 [1] KNOB-CONTROL  
11. 113-4683 [1] ALARM AS (QUICK COUPLER)  
12. 8T-0328 [1] WASHER-HARD (5.5X10X1-MM THK)  
13. 8T-0325 M [1] BOLT (M5X0.8X14-MM)  
14. 155-4572 [1] HARNESS AS-WIRING (QUICK COUPLER ALARM)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
15. 3S-2093 [2] STRAP-CABLE  
16. 185-8636 [1] COVER  
17. 206-7599 [1] HARNESS AS-WIRING (QUICK COUPLER LOCKOUT)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  M   METRIC PART
 

#SEBP36620342
 

264-0216: WIRING GP-QUICK COUPLER

264-0216 WIRING GP-QUICK COUPLER
S/N JCD1-UP; JNK1-UP
PART OF 263-5783 CONTROL AR-COUPLER
AN ATTACHMENT
i02390415 SEBP3662
2640216 WIRING GP-QUICK COUPLER Parts scheme 2640216 WIRING GP-QUICK COUPLER Parts scheme
  For full view, you need register

Parts for your 330C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 263-5758 [1] HARNESS AS-WIRING (QUICK COUPLER VALVE)  
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
2. 7X-2619 M [4] BOLT (M6X1X10-MM)  
3. 155-2715 [1] SWITCH AS-ROTARY (QUICK COUPLER)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  186-3735 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
4. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
5. 207-4765 [1] BRACKET AS  
6. 161-3128 [1] RELAY (24-VOLT)(QUICK COUPLER LEVER, PRIORITY)  
6A. 161-3128 [1] RELAY (24-VOLT)(QUICK CPLR LEVER, ON POSITION)  
6B. 161-3128 [2] RELAY (24-VOLT)(QUICK CPLR, LOCK POSITION)  
7. 6V-8369 [1] NUT (7/16-28-THD)  
8. 2H-3920 [1] LOCKWASHER  
9. 158-4212 [1] FILM-INSTRUCTION (QUICK COUPLER)  
10. 134-0394 [1] KNOB-CONTROL  
11. 113-4683 [1] ALARM AS (QUICK COUPLER)  
12. 8T-0328 [1] WASHER-HARD (5.5X10X1-MM THK)  
13. 8T-0325 M [1] BOLT (M5X0.8X14-MM)  
14. 155-4572 [1] HARNESS AS-WIRING (QUICK COUPLER ALARM)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
15. 3S-2093 [2] STRAP-CABLE  
16. 185-8636 [1] COVER  
17. 206-7599 [1] HARNESS AS-WIRING (QUICK COUPLER LOCKOUT)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  M   METRIC PART
 

#SEBP36620343
 

163-6640: WIRING GP-REFUELING PUMP

163-6640 WIRING GP-REFUELING PUMP
S/N JCD1-UP; JNK1-UP
PART OF 163-7726 PUMP AR-REFUELING
Type 1
AN ATTACHMENT
i01245804 SEBP3662
1636640 WIRING GP-REFUELING PUMP Parts scheme 1636640 WIRING GP-REFUELING PUMP Parts scheme
  For full view, you need register

Parts for your 330C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-0328 [1] WASHER-HARD (5.5X10X1-MM THK)  
2. 3S-2093 [12] STRAP-CABLE  
3. 132-1827 [1] WIRE AS  
4. 116-0095 [1] SWITCH AS (REFUELING START)  
  116-0096 [1] HARNESS AS-WIRING (REFUELING PUMP, START)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
5. 116-0097 [1] SWITCH AS (REFUELING STOP)  
  116-0098 [1] HARNESS AS-WIRING (REFUELING PUMP, STOP)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUGE AS, WEDGE & INTERFACE SEAL)
6. 204-1686 [1] HARNESS AS-SWITCH (REFUELING PUMP RELAY)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  155-2270 [3] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUGE AS, WEDGE & INTERFACE SEAL)
7. 9X-3495 [1] CLIP AS  
8. 8T-4199 M [1] BOLT (M8X1.25X12-MM)  
9. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
10. 149-5050 [1] RELAY (24-VOLT)(REFUELING PUMP, START)  
10A. 149-5050 [1] RELAY (24-VOLT)(REFUELING PUMP, STOP)  
11. 7X-2619 M [4] BOLT (M6X1X10-MM)  
12. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
13. 165-4026 [1] SWITCH AS-MAGNETIC (24-VOLT)(REFUELING PUMP RELAY)  
  4F-2294 [2] NUT-JAM (5/16-24-THD)  
  6V-8186 [2] NUT-FULL (5/16-24-THD)  
  6V-8378 [2] NUT (10-32-THD)  
  M   METRIC PART
 

#SEBP36620344
 

163-6640: WIRING GP-REFUELING PUMP

163-6640 WIRING GP-REFUELING PUMP
S/N JCD1-UP; JNK1-UP
PART OF 163-7726 PUMP AR-REFUELING
Type 2
AN ATTACHMENT
i02613453 SEBP3662
1636640 WIRING GP-REFUELING PUMP Parts scheme 1636640 WIRING GP-REFUELING PUMP Parts scheme
  For full view, you need register

Parts for your 330C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-0328 C [3] WASHER-HARD (5.5X10X1-MM THK)  
2. 3S-2093 C [16] STRAP-CABLE  
3. 238-1721 C [1] WIRE AS  
4. 116-0095 [1] SWITCH AS (REFUELING START)  
  8T-8748 [1] ADAPTER-MOUNT  
  6F-0253 [1] LOCKWASHER  
  3K-0835 [1] NUT (5/8-24-THD)  
  6V-2689 D TUBE-HEAT SHRINK (6.35-MM DIA)(0.2-M)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
5. 116-0097 [1] SWITCH AS (REFUELING STOP)  
  3K-0835 [1] NUT (5/8-24-THD)  
  6F-0253 [1] LOCKWASHER  
  8T-8748 [1] ADAPTER-MOUNT  
  6V-2689 D TUBE-HEAT SHRINK (6.35-MM DIA)(0.2-M)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
6. 238-2074 C [1] HARNESS AS-SWITCH (REFUELING PUMP RELAY)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  155-2270 [3] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUGE AS, WEDGE & INTERFACE SEAL)
7. 9X-3495 [1] CLIP AS  
8. 8T-4199 M [1] BOLT (M8X1.25X12-MM)  
9. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
10. 149-5050 [1] RELAY (24-VOLT)(REFUELING PUMP, START)  
10A. 149-5050 [1] RELAY (24-VOLT)(REFUELING PUMP, STOP)  
11. 7X-2619 CM [2] BOLT (M6X1X10-MM)  
12. 9X-8256 C [2] WASHER (6.6X12X2-MM THK)  
13. 213-0772 C [1] SWITCH AS-MAGNETIC (24-VOLT)(REFUELING PUMP RELAY)  
14. 5C-5302 CM [2] SCREW (M5X0.8X30-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  M   METRIC PART
 

#SEBP36620345
 

183-0997: WIRING GP-WORK TOOL

183-0997 WIRING GP-WORK TOOL
S/N JCD1-UP; JNK1-UP
PART OF 193-6373, 200-6665 CONTROL AR-AUXILIARY
AN ATTACHMENT
i01616038 SEBP3662
1830997 WIRING GP-WORK TOOL Parts scheme
  For full view, you need register

Parts for your 330C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [5] STRAP-CABLE  
2. 183-0998 [1] HARNESS AS-SOLENOID (FLOW LIMIT)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
 

#SEBP36620346
 

169-5543: DRIVE GP-FINAL

169-5543 DRIVE GP-FINAL
S/N JCD1-UP; JNK1-UP
W/MOTOR
PART OF 237-7234, 239-9733 FRAME AR-UNDERCARRIAGE
AN ATTACHMENT
i01790334 SEBP3662
1695543 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 330C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 200-3502 Y [1] DRIVE GP-FINAL  
2. 165-9333 Y [1] MOTOR & MTG GP-TRAVEL  
  Y   SEPARATE ILLUSTRATION
 

#SEBP36620347
 

199-4578: DRIVE GP-FINAL

199-4578 DRIVE GP-FINAL -WITH MOTOR
S/N JCD1-271; JNK1-205
PART OF 191-2576, 218-9404 POWER TRAIN AR
i01627867 SEBP3662
1994578 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 330C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 199-4579 Y [1] DRIVE GP-FINAL  
3. 191-5606 Y [1] MOTOR & MTG GP-TRAVEL  
  Y   SEPARATE ILLUSTRATION
 

#SEBP36620348
 

199-4579: DRIVE GP-FINAL

199-4579 DRIVE GP-FINAL -WITHOUT MOTOR
S/N JCD1-271; JNK1-205
PART OF 199-4578, 199-4640 DRIVE GP-FINAL
FIELD REPLACEMENT ORDER @@@@@199-4640@@@@@
i01628006 SEBP3662
1994579 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 330C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-2338 [2] PLUG-PIPE  
2. 7Y-0639 [1] GEAR-SUN (21-TEETH)  
3. 7Y-0642 [1] GEAR-RING (63-TEETH)  
4. 7Y-0645 [1] CARRIER  
5. 7Y-0659 [3] GEAR-PLANETARY (22-TEETH)  
6. 7Y-0661 [3] SHAFT-PLANETARY  
7. 7Y-0662 [4] SHAFT-PLANETARY  
8. 7Y-0663 [4] GEAR-PLANETARY (20-TEETH)  
9. 7Y-0667 [1] RING-RETAINING  
10. 7Y-0673 [1] GEAR-RING (73-TEETH)  
11. 7Y-0676 [3] GEAR-PLANETARY (24-TEETH)  
12. 7Y-0731 [1] CARRIER AS  
12A. 7Y-0656 [3] SHAFT-PLANETARY  
13. 7Y-1094 M [14] WASHER (66X102X1-MM THK)  
14. 7Y-5235 M [20] BOLT (M24X3X190-MM)  
15. 094-0577 B [1] PLATE (7-MM THK)  
16. 094-0578 B [1] PLATE (8-MM THK)  
17. 094-0579 B [1] PLATE (9-MM THK)  
18. 094-0580 B [1] PLATE (10-MM THK)  
19. 110-7231 [1] GEAR-SUN (18-TEETH)  
20. 191-2521 [1] GEAR-SUN (23-TEETH)  
21. 191-2522 [1] RETAINER  
22. 191-2523 [1] CARRIER-PLANETARY  
23. 191-2526 [1] COVER  
24. 191-2645 [1] COUPLING  
25. 196-4873 [2] BEARING AS-BALL  
26. 199-4580 [1] HOUSING  
27. 199-4581 [1] HOUSING  
28. 199-4582 [3] BEARING AS  
29. 199-4583 [11] BEARING AS  
30. 213-4737 [1] SEAL GP-DUO-CONE  
31. 093-1731 [1] RING-RETAINING  
32. 094-0584 [6] WASHER (40.3X72X1-MM THK)  
33. 095-0891 [7] PIN-SPRING  
34. 096-3216 M [2] SETSCREW-SOCKET (M12X1.75X12-MM)  
35. 2P-3628 [1] SEAL-O-RING  
36. 7M-8485 [2] SEAL-O-RING  
37. 7Y-0595 [2] SPACER (58X79.6X6-MM THK)  
38. 7Y-0644 [1] SPACER (163X190X8-MM THK)  
39. 8T-4167 [20] WASHER-HARD (26X44X4-MM THK)  
40. 8T-4240 [3] RING-RETAINING  
41. 9X-6032 M [12] BOLT-SOCKET HEAD (M10X1.5X30-MM)  
42. 1U-8846 B SEALANT-GASKET  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP36620349
 

199-4640: DRIVE GP-FINAL

199-4640 DRIVE GP-FINAL -WITHOUT MOTOR
S/N JCD1-271; JNK1-205
FIELD REPLACEMENT FOR @@@@@199-4579@@@@@
i01720567 SEBP3662
  For full view, you need register

Parts for your 330C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  199-4579 Y [1] DRIVE GP-FINAL  
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
Electric Starting System - Test
C-9 Engines for Caterpillar Built Machines
Troubleshooting
CID 0168 FMI 01 System Voltage Low
C-9 Engine for Caterpillar Built Machines
CID 0168 FMI 00 System Voltage High
C-9 Engine for Caterpillar Built Machines
CID 0263 FMI 03 Digital Sensor Supply short to +batt
C-9 Engine for Caterpillar Built Machines
CID 0263 FMI 04 Digital Sensor Supply short to ground
C-9 Engine for Caterpillar Built Machines
Electrical Connectors - Inspect
C-9 Engine for Caterpillar Built Machines
CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C-9 Engine for the 973C Track-Type Loader
CID 0100 FMI 04 Engine Oil Pressure short to ground
C-9 Engine for Caterpillar Built Machines
CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C-9 Engine for Caterpillar Built Machines
CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C-9 Engine for the 973C Track-Type Loader
CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C-9 Engine for the 973C Track-Type Loader
CID 0273 FMI 03 Turbo Outlet Pressure open/short to +batt
C-9 Engine for Caterpillar Built Machines
CID 0273 FMI 04 Turbo Outlet Pressure short to ground
C-9 Engine for Caterpillar Built Machines
CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C-9 Engine for Caterpillar Built Machines
CID 0274 FMI 04 Atmospheric Pressure short to ground
C-9 Engine for Caterpillar Built Machines
CID 0041 FMI 04 8 Volt DC Supply short to ground
C-9 Engine for Caterpillar Built Machines
CID 0248 FMI 09 Cat Data Link not communicating
C-9 Engine for Caterpillar Built Machines
CID 0042 FMI 11 Inject Actuation Control Valve open/short
C-9 Engine for Caterpillar Built Machines
CID 0094 FMI 03 Fuel Pressure open/short to +batt
C-9 Engine for Caterpillar Built Machines
CID 0094 FMI 04 Fuel Pressure short to ground
C-9 Engine for Caterpillar Built Machines
CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
C-9 Engine for Caterpillar Built Machines
CID 0110 FMI 04 Engine Coolant Temperature short to ground
C-9 Engine for Caterpillar Built Machines
CID 0164 FMI 00 High Injector Actuation Pressure
C-9 Engine for Caterpillar Built Machines
CID 0164 FMI 03 Injector Actuation Pressure voltage high
C-9 Engine for the 973C Track-Type Loader
CID 0175 FMI 03 Engine Oil Temperature open/short to +batt
C-9 Engine for the 973C Track-Type Loader
CID 0175 FMI 04 Engine Oil Temperature short to ground
C-9 Engine for the 973C Track-Type Loader
CID 0267 FMI 02 Incorrect Engine Shutdown Switch inputs
C-9 Engine for Caterpillar Built Machines
CID 0041 FMI 03 8 Volt DC Supply short to +batt
C-9 Engine for Caterpillar Built Machines
How To Use the Functional Tests
C-9 Engine for Caterpillar Built Machines
Air Inlet Heater Circuit - Test
C-9 Engine for Caterpillar Built Machines
CID 0164 FMI 11 Injector Actuation Pressure system fault
C-9 Engine for Caterpillar Built Machines
CID 0190 FMI 02 Loss of Engine Speed Signal
C-9 Engine for the 973C Track-Type Loader
CID 0190 FMI 11 Engine Speed Sensor mechanical failure
C-9 Engine for Caterpillar Built Machines
CID 0617 FMI 05 Air Inlet Heater Relay open/current below normal
C-9 Engine for the 973C Track-Type Loader
Cat Data Link Circuit - Test
C-9 Engine for Caterpillar Built Machines
Electrical Power Supply Circuit - Test
C-9 Engine for Caterpillar Built Machines
Engine Pressure Sensor Open or Short Circuit - Test
C-9 Engine for Caterpillar Built Machines
Engine Shutdown Switch Circuit - Test
C-9 Engine for Caterpillar Built Machines
CID 0275 FMI 03 Right Turbo Inlet Pressure open/short to +batt
C-9 Engine for Caterpillar Built Machines
CID 0275 FMI 04 Right Turbo Inlet Pressure short to ground
C-9 Engine for Caterpillar Built Machines
CID 0164 FMI 02 Injector Actuation Pressure signal erratic
C-9 Engine for the 973C Track-Type Loader
CID 0342 FMI 02 Loss of Secondary Engine Speed signal
C-9 Engine for Caterpillar Built Machines
CID 0091 FMI 02 Incorrect Throttle Switch inputs
C-9 Engine for the 973C Track-Type Loader
CID 0175 FMI 03 Engine Oil Temperature open/short to +batt
C-9 Engine for Caterpillar Built Machines
CID 0175 FMI 04 Engine Oil Temperature short to ground
C-9 Engine for Caterpillar Built Machines
CID 0320 FMI 02 Speed/Timing Sensor Loss of Signal
C-9 Engine for Caterpillar Built Machines
Injection Actuation Pressure Control Valve Circuit - Test
C-9 Engine for Caterpillar Built Machines
CID 0164 FMI 04 Injector Actuation Pressure voltage low
C-9 Engine for the 973C Track-Type Loader
CID 0342 FMI 11 Secondary Engine Speed Sensor mechanical failure
C-9 Engine for the 973C Track-Type Loader
CID 1715 FMI 03 Engine Oil Temperature Sensor #2 short to +batt
C-9 Engine for Caterpillar Built Machines
CID 1715 FMI 04 Engine Oil Temperature Sensor #2 short to ground
C-9 Engine for Caterpillar Built Machines
Engine Pressure Sensor Open or Short Circuit - Test
C-9 Engine for the 973C Track-Type Loader
Sensors and Electrical Connectors
C-9 Engine for Caterpillar Built Machines
5 Volt Engine Pressure Sensor Supply Circuit - Test
C-9 Engine for Caterpillar Built Machines
Analog Sensor Supply Circuit - Test
C-9 Engine for Caterpillar Built Machines
Digital Sensor Supply Circuit - Test
C-9 Engine for Caterpillar Built Machines
Engine Speed/Timing Sensor Circuit - Test
C-9 Engine for Caterpillar Built Machines
Throttle Position Sensor Circuit - Test
C-9 Engine for Caterpillar Built Machines
Throttle Switch Circuit - Test
C-9 Engine for the 973C Track-Type Loader
CID 0444 FMI 03 Start Relay short to +batt
C-9 Engine for the 973C Track-Type Loader
CID 0444 FMI 05 Start Relay open circuit
C-9 Engine for the 973C Track-Type Loader
CID 0444 FMI 06 Start Relay short to ground
C-9 Engine for the 973C Track-Type Loader
Start Relay Circuit - Test
C-9 Engine for the 973C Track-Type Loader
Sensors and Electrical Connectors
C-9 Engine for the 973C Track-Type Loader
CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C-9 Engine for the 973C Track-Type Loader
CID 0274 FMI 04 Atmospheric Pressure short to ground
C-9 Engine for the 973C Track-Type Loader
Engine Wiring Information
C-9 Engine for Caterpillar Built Machines
User Defined Shutdown Input Circuit - Test
C-9 Engine for Caterpillar Built Machines
CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C-9 Engine for Caterpillar Built Machines
CID 0617 FMI 06 Air Inlet Heater Relay grounded/current above norm
C-9 Engine for Caterpillar Built Machines
Service Magazine
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04
A New Engine Oil Grade Plug 0W20 Is Now Available {1408}
2002/04/22
Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/12
Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08
Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Caterpillar Parts SIS Catalog 330C :

WIRING GP-PLATFORM
217-6002 WIRING GP-PLATFORM
WIRING GP-PLATFORM
217-6002 WIRING GP-PLATFORM
WIRING GP-PLATFORM
217-6002 WIRING GP-PLATFORM
WIRING GP-MEDIUM PRESSURE
223-0126 WIRING GP-MEDIUM PRESSURE
WIRING GP-MEDIUM PRESSURE
223-0126 WIRING GP-MEDIUM PRESSURE
WIRING GP-MEDIUM PRESSURE
223-0126 WIRING GP-MEDIUM PRESSURE
WIRING GP-MATERIAL HANDLER
229-1429 WIRING GP-MATERIAL HANDLER
WIRING GP-FINE SWING
193-3391 WIRING GP-FINE SWING
WIRING GP-QUICK COUPLER
204-6912 WIRING GP-QUICK COUPLER
WIRING GP-QUICK COUPLER
264-0216 WIRING GP-QUICK COUPLER
WIRING GP-REFUELING PUMP
163-6640 WIRING GP-REFUELING PUMP
WIRING GP-REFUELING PUMP
163-6640 WIRING GP-REFUELING PUMP
WIRING GP-WORK TOOL
183-0997 WIRING GP-WORK TOOL
DRIVE GP-FINAL
169-5543 DRIVE GP-FINAL
DRIVE GP-FINAL
199-4578 DRIVE GP-FINAL
DRIVE GP-FINAL
199-4579 DRIVE GP-FINAL

Truck sale:

Caterpillar 330C
 
Caterpillar 330C
- Crawler Excavators
CGT - COMPAGNIA GENERALE TRATTORI
 
375,750 
Caterpillar 330 CF, Crawler Excavators, Construction
- Crawler Excavators
WHEELER MACHINERY CO.
Caterpillar 330 CF, Crawler Excavators, Construction
379,533 
Caterpillar 330 CF, Crawler Excavators, Construction
- Crawler Excavators
WHEELER MACHINERY CO.
 
372,345 
Caterpillar 330 CF, Crawler Excavators, Construction
- Crawler Excavators
WHEELER MACHINERY CO.
 
330,000 
Caterpillar 330 CF, Crawler Excavators, Construction
- Crawler Excavators
WHEELER MACHINERY CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.