AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

322C L Hydraulic Excavator HEK00001-UP (MACHINE) POWERED BY 3126B Engine ELECTRICAL AND STARTING SYSTEM Caterpillar SIS



EXCAVATOR 322C EXCAVATOR HEK
 322C L Hydraulic Excavator HEK00001-UP (MACHINE) POWERED BY 3126B Engine SEBP3677 322C HEK   (2001)

Parts group 322C:

  For full view, you need register
ELECTRICAL AND STARTING SYSTEM
ALARM GP
ALARM GP
132-1829 ALARM GP
132-1829 ALARM GP
S/N HEK1-UP
24-VOLT
PART OF 190-1020 WIRING GP-CAB
ALARM GP-TRAVEL
183-1037 ALARM GP-TRAVEL
183-1037 ALARM GP-TRAVEL
S/N HEK1-UP
PART OF 218-5087 CHASSIS AR
Type 1
183-1037 ALARM GP-TRAVEL
183-1037 ALARM GP-TRAVEL
S/N HEK1-UP
PART OF 218-5087 CHASSIS AR
Type 2
ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
177-6972 ALTERNATOR GP-CHARGING
177-6972 ALTERNATOR GP-CHARGING
S/N HEK1-UP
24-VOLT, 65-AMPERE
PART OF 218-5085 ENGINE AR
ALTERNATOR GP-CHARGING
185-5294 ALTERNATOR GP-CHARGING
185-5294 ALTERNATOR GP-CHARGING
S/N HEK1-UP
24-VOLT, 65-AMPERE
PART OF 177-6972 ALTERNATOR GP-CHARGING
BATTERY GP
BATTERY & WIRING GP
183-1019 BATTERY & WIRING GP
183-1019 BATTERY & WIRING GP -COLD WEATHER
S/N HEK1-UP
PART OF 186-1122 STARTING AR-COLD WEATHER
AN ATTACHMENT
BATTERY & WIRING GP
214-0050 BATTERY & WIRING GP
214-0050 BATTERY & WIRING GP
S/N HEK1-190
PART OF 218-5087 CHASSIS AR
BATTERY & WIRING GP
214-0050 BATTERY & WIRING GP
214-0050 BATTERY & WIRING GP
S/N HEK191-1047
PART OF 218-5087 CHASSIS AR
BATTERY & WIRING GP
214-0050 BATTERY & WIRING GP
214-0050 BATTERY & WIRING GP
S/N HEK1048-UP
PART OF 218-5087 CHASSIS AR
ELECTRONICS GP-ENGINE
CONTROL & MTG GP-ENGINE ELEK
183-1195 CONTROL & MTG GP-ENGINE ELEK
183-1195 CONTROL & MTG GP-ENGINE ELEK
S/N 5GG831-UP
FUEL COOLED
PART OF 213-9266, 237-0281 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
CONTROL GP-ENGINE ELECTRONIC
210-0849 CONTROL GP-ENGINE ELECTRONIC
210-0849 CONTROL GP-ENGINE ELECTRONIC
S/N 5GG831-UP
PART OF 183-1195 CONTROL & MTG GP-ENGINE ELEK
Type 1
FIELD REPLACEMENT ORDER @@@@@348-2378@@@@@
ALSO AN ATTACHMENT
CONTROL GP-ENGINE ELECTRONIC
210-0849 CONTROL GP-ENGINE ELECTRONIC
210-0849 CONTROL GP-ENGINE ELECTRONIC
S/N 5GG831-UP
PART OF 183-1195 CONTROL & MTG GP-ENGINE ELEK
Type 2
FIELD REPLACEMENT ORDER @@@@@348-2378@@@@@
ALSO AN ATTACHMENT
CONTROL GP-ENGINE ELECTRONIC
240-5304 CONTROL GP-ENGINE ELECTRONIC
240-5304 CONTROL GP-ENGINE ELECTRONIC
S/N 5GG831-UP
PART OF 210-0849 CONTROL GP-ENGINE ELECTRONIC
ALSO AN ATTACHMENT
CONTROL GP-ENGINE ELECTRONIC
348-2378 CONTROL GP-ENGINE ELECTRONIC
348-2378 CONTROL GP-ENGINE ELECTRONIC
S/N 5GG831-UP
PART OF 210-0849 CONTROL GP-ENGINE ELECTRONIC
FIELD REPLACEMENT FOR @@@@@210-0849@@@@@
ALSO AN ATTACHMENT
ELECTRONICS GP-IMPLEMENT
CONTROL & MTG GP-IMPLEMENT
177-7704 CONTROL & MTG GP-IMPLEMENT
177-7704 CONTROL & MTG GP-IMPLEMENT
S/N HEK1-UP
AN ATTACHMENT
ELECTRONICS GP-MACHINE
CONTROL & MTG GP-MACHINE
218-5088 CONTROL & MTG GP-MACHINE
218-5088 CONTROL & MTG GP-MACHINE
S/N HEK1-UP
PART OF 218-5087 CHASSIS AR
CONTROL & MTG GP-MACHINE
229-7390 CONTROL & MTG GP-MACHINE
229-7390 CONTROL & MTG GP-MACHINE
S/N HEK1-UP
PART OF 202-7075 CONTROL AR-AUXILIARY
AN ATTACHMENT
ELECTRONICS GP-MACHINE
207-5262 ELECTRONICS GP-MACHINE
207-5262 ELECTRONICS GP-MACHINE -SECURITY
S/N HEK1-UP
PART OF 238-7542 WIRING GP-COMMUNICATION
AN ATTACHMENT
CONTROL GP-UNPROGRAMMED
CONTROL GP-UNPROGRAMMED
168-7314 CONTROL GP-UNPROGRAMMED
168-7314 CONTROL GP-UNPROGRAMMED -PRODUCT LINK 201
S/N HEK1-UP
PART OF 242-7205 CONTROL GP-COMMUNICATION
AN ATTACHMENT
CONVERTER GP-ELECTRICAL
CONVERTER GP-ELECTRICAL
192-4564 CONVERTER GP-ELECTRICAL
192-4564 CONVERTER GP-ELECTRICAL
S/N HEK1-UP
12V-10A POWER SUPPLY
AN ATTACHMENT
LIGHTING GP
LAMP GP-FLOOD
153-2521 LAMP GP-FLOOD
153-2521 LAMP GP-FLOOD
S/N HEK1-UP
24-VOLT
PART OF 111-4688, 116-0189, 116-0190 LIGHTING GP-BOOM, 116-0184 LIGHTING GP-FLOOD
AN ATTACHMENT
LAMP GP-FLOOD
153-2523 LAMP GP-FLOOD
153-2523 LAMP GP-FLOOD
S/N HEK1-UP
24-VOLT
PART OF 4I-5409 LIGHTING GP-FLOOD
LAMP GP-FLOOD
5I-8250 LAMP GP-FLOOD
5I-8250 LAMP GP-FLOOD
S/N HEK1-UP
65 WATT/24 VOLT. VERTICAL
PART OF 116-0189, 116-0190 LIGHTING GP-BOOM, 116-0184 LIGHTING GP-FLOOD
AN ATTACHMENT
LIGHTING GP-BOOM
111-4688 LIGHTING GP-BOOM
111-4688 LIGHTING GP-BOOM
S/N HEK1-UP
LONG BOOM
PART OF 216-6593 LINKAGE AR-BUCKET
AN ATTACHMENT
LIGHTING GP-BOOM
116-0189 LIGHTING GP-BOOM
116-0189 LIGHTING GP-BOOM
S/N HEK1-UP
PART OF 190-2320 BOOM AR-1 PIECE LONG
AN ATTACHMENT
LIGHTING GP-BOOM
116-0190 LIGHTING GP-BOOM
116-0190 LIGHTING GP-BOOM
S/N HEK1-UP
PART OF 190-2321 BOOM AR-MASS
AN ATTACHMENT
LIGHTING GP-FLOOD
116-0184 LIGHTING GP-FLOOD
116-0184 LIGHTING GP-FLOOD -LH
S/N HEK1-UP
PART OF 190-2320 BOOM AR-1 PIECE LONG, 190-2321 BOOM AR-MASS
AN ATTACHMENT
LIGHTING GP-FLOOD
4I-5409 LIGHTING GP-FLOOD
4I-5409 LIGHTING GP-FLOOD -CHASSIS
S/N HEK1-UP
PART OF 218-5087 CHASSIS AR
PANEL GP-CIRCUIT BREAKER
PANEL GP-CIRCUIT BREAKER
206-6030 PANEL GP-CIRCUIT BREAKER
206-6030 PANEL GP-CIRCUIT BREAKER
S/N HEK1-UP
PART OF 214-0050 BATTERY & WIRING GP
PANEL GP-CIRCUIT BREAKER
231-5283 PANEL GP-CIRCUIT BREAKER
231-5283 PANEL GP-CIRCUIT BREAKER
S/N HEK191-1047
PART OF 214-0050 BATTERY & WIRING GP
PANEL GP-CIRCUIT BREAKER
260-9483 PANEL GP-CIRCUIT BREAKER
260-9483 PANEL GP-CIRCUIT BREAKER
S/N HEK1048-UP
PART OF 214-0050 BATTERY & WIRING GP
SENSOR GP
SENSOR GP-ENGINE
159-1822 SENSOR GP-ENGINE
159-1822 SENSOR GP-ENGINE
S/N 5GG831-UP
PART OF 213-9266, 237-0281 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
SENSOR GP-ENGINE
274-2079 SENSOR GP-ENGINE
274-2079 SENSOR GP-ENGINE
S/N 5GG9889-UP
PART OF 213-9266, 237-0281 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
SENSOR GP-LIQUID LEVEL
178-2345 SENSOR GP-LIQUID LEVEL
178-2345 SENSOR GP-LIQUID LEVEL
S/N HEK1-UP
WATER IN FUEL
PART OF 183-8254 SENSOR GP-LIQUID LEVEL
SENSOR GP-LIQUID LEVEL
183-8254 SENSOR GP-LIQUID LEVEL
183-8254 SENSOR GP-LIQUID LEVEL -WATER IN FUEL
S/N HEK1-UP
PART OF 218-5087 CHASSIS AR
SENSOR GP-PRESSURE
194-6722 SENSOR GP-PRESSURE
194-6722 SENSOR GP-PRESSURE
S/N 5GG1-UP
PART OF 239-2395 SENSOR GP-PRESSURE
OPTIONAL FIELD REPLACEMENT ORDER 274-6717 SENSOR-PRESSURE
ALSO AN ATTACHMENT
SENSOR GP-PRESSURE
194-6723 SENSOR GP-PRESSURE
194-6723 SENSOR GP-PRESSURE
S/N 5GG1-UP
PART OF 274-2079 SENSOR GP-ENGINE, 247-0302 SENSOR GP-PRESSURE
ALSO AN ATTACHMENT
SENSOR GP-PRESSURE
194-6725 SENSOR GP-PRESSURE
194-6725 SENSOR GP-PRESSURE
S/N 5GG1-UP
PART OF 239-2396 SENSOR GP-PRESSURE
ALSO AN ATTACHMENT
SENSOR GP-PRESSURE
224-4536 SENSOR GP-PRESSURE
224-4536 SENSOR GP-PRESSURE
S/N 5GG1-UP
PART OF 236-6220 SENSOR GP-PRESSURE
ALSO AN ATTACHMENT
SENSOR GP-PRESSURE
236-6220 SENSOR GP-PRESSURE
236-6220 SENSOR GP-PRESSURE
S/N 5GG1-UP
PART OF 159-1822, 274-2079 SENSOR GP-ENGINE
ALSO AN ATTACHMENT
SENSOR GP-PRESSURE
239-2395 SENSOR GP-PRESSURE
239-2395 SENSOR GP-PRESSURE
S/N 5GG1-UP
PART OF 159-1822, 274-2079 SENSOR GP-ENGINE
ALSO AN ATTACHMENT
SENSOR GP-PRESSURE
239-2396 SENSOR GP-PRESSURE
239-2396 SENSOR GP-PRESSURE
S/N 5GG1-UP
PART OF 159-1822, 274-2079 SENSOR GP-ENGINE
ALSO AN ATTACHMENT
SENSOR GP-PRESSURE
247-0302 SENSOR GP-PRESSURE
247-0302 SENSOR GP-PRESSURE
S/N 5GG1-UP
PART OF 159-1822 SENSOR GP-ENGINE
ALSO AN ATTACHMENT
SENSOR GP-SPEED
190-6186 SENSOR GP-SPEED
190-6186 SENSOR GP-SPEED -CRANKSHAFT SPEED
S/N 5GG831-UP
PART OF 213-9266, 237-0281 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
SENSOR GP-SPEED
236-6221 SENSOR GP-SPEED
236-6221 SENSOR GP-SPEED
S/N 5GG1-UP
PART OF 159-1822, 274-2079 SENSOR GP-ENGINE
ALSO AN ATTACHMENT
SENSOR GP-SPEED
318-1181 SENSOR GP-SPEED
318-1181 SENSOR GP-SPEED
S/N 5GG1-UP
MAGNETIC, LOW OUTPUT
PART OF 190-6186 SENSOR GP-SPEED
ALSO AN ATTACHMENT
SENSOR GP-TEMPERATURE
191-6587 SENSOR GP-TEMPERATURE
191-6587 SENSOR GP-TEMPERATURE
S/N 5GG1-UP
2 PIN PASSIVE
PART OF 204-0320 SENSOR GP-TEMPERATURE
Type 1
ALSO AN ATTACHMENT
SENSOR GP-TEMPERATURE
191-6587 SENSOR GP-TEMPERATURE
191-6587 SENSOR GP-TEMPERATURE
S/N 5GG1-UP
2 PIN PASSIVE
PART OF 204-0320 SENSOR GP-TEMPERATURE
Type 2
ALSO AN ATTACHMENT
SENSOR GP-TEMPERATURE
197-8391 SENSOR GP-TEMPERATURE
197-8391 SENSOR GP-TEMPERATURE
S/N 5GG1-9888
PART OF 159-1822 SENSOR GP-ENGINE
ALSO AN ATTACHMENT
SENSOR GP-TEMPERATURE
197-8392 SENSOR GP-TEMPERATURE
197-8392 SENSOR GP-TEMPERATURE
S/N 5GG1-UP
COOLANT, WATER
PART OF 159-1822 SENSOR GP-ENGINE
ALSO AN ATTACHMENT
SENSOR GP-TEMPERATURE
197-8392 SENSOR GP-TEMPERATURE
197-8392 SENSOR GP-TEMPERATURE
S/N 5GG1-UP
COOLANT, WATER
PART OF 159-1822 SENSOR GP-ENGINE
SENSOR GP-TEMPERATURE
204-0320 SENSOR GP-TEMPERATURE
204-0320 SENSOR GP-TEMPERATURE
S/N 5GG1-UP
PART OF 159-1822, 274-2079 SENSOR GP-ENGINE
ALSO AN ATTACHMENT
SENSOR GP-TEMPERATURE
274-7395 SENSOR GP-TEMPERATURE
274-7395 SENSOR GP-TEMPERATURE
S/N 5GG9889-UP
PART OF 274-2079 SENSOR GP-ENGINE
ALSO AN ATTACHMENT
SENSOR GP-TEMPERATURE
274-7396 SENSOR GP-TEMPERATURE
274-7396 SENSOR GP-TEMPERATURE
S/N 5GG9889-UP
PART OF 274-2079 SENSOR GP-ENGINE
ALSO AN ATTACHMENT
STARTING AID GP
STARTING AID GP
118-7284 STARTING AID GP
118-7284 STARTING AID GP -AIR INLET HEATER
S/N 5GG831-UP
24-VOLT
PART OF 213-9266, 237-0281 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
STARTING AID GP
194-1686 STARTING AID GP
194-1686 STARTING AID GP -HEATER WIRING
S/N 5GG831-4574
24 VOLT. FRONT
PART OF 213-9266, 237-0281 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
STARTING AID GP
194-1686 STARTING AID GP
194-1686 STARTING AID GP -HEATER WIRING
S/N 5GG4575-UP
24 VOLT. FRONT
PART OF 213-9266, 237-0281 ENGINE AR-COMPLETE
Type 1
ALSO AN ATTACHMENT
STARTING AID GP
194-1686 STARTING AID GP
194-1686 STARTING AID GP -HEATER WIRING
S/N 5GG4575-UP
24 VOLT. FRONT
PART OF 213-9266, 237-0281 ENGINE AR-COMPLETE
Type 2
ALSO AN ATTACHMENT
STARTING AID GP-ETHER
255-3009 STARTING AID GP-ETHER
255-3009 STARTING AID GP-ETHER
S/N HEK1-UP
AN ATTACHMENT
STARTING AID GP-ETHER
307-6799 STARTING AID GP-ETHER
307-6799 STARTING AID GP-ETHER
S/N HEK1-UP
FIELD INSTALLATION
VALVE GP-ETHER STARTING
239-1134 VALVE GP-ETHER STARTING
239-1134 VALVE GP-ETHER STARTING
S/N HEK1-UP
24-VOLT, CONTINUOUS
PART OF 255-3009, 307-6799 STARTING AID GP-ETHER
AN ATTACHMENT
STARTING AR
186-1122 STARTING AR-COLD WEATHER
186-1122 STARTING AR-COLD WEATHER
S/N HEK1-UP
AN ATTACHMENT
STARTING MOTOR GP
STARTING MOTOR GP-ELECTRIC
128-5626 STARTING MOTOR GP-ELECTRIC
128-5626 STARTING MOTOR GP-ELECTRIC -COLD WEATHER
S/N HEK1-UP
PART OF 186-1122 STARTING AR-COLD WEATHER
AN ATTACHMENT
STARTING MOTOR GP-ELECTRIC
201-4204 STARTING MOTOR GP-ELECTRIC
201-4204 STARTING MOTOR GP-ELECTRIC
S/N HEK1-UP
48 VOLT
PART OF 218-5085 ENGINE AR
STARTING MOTOR GP-ELECTRIC
207-1511 STARTING MOTOR GP-ELECTRIC
207-1511 STARTING MOTOR GP-ELECTRIC
S/N HEK1-UP
24 VOLT
PART OF 201-4204 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT ORDER @@@@@207-1517@@@@@
STARTING MOTOR GP-ELECTRIC
207-1517 STARTING MOTOR GP-ELECTRIC
207-1517 STARTING MOTOR GP-ELECTRIC
S/N HEK1-UP
24-VOLT
FIELD REPLACEMENT FOR @@@@@207-1511@@@@@
STARTING MOTOR GP-ELECTRIC
207-1551 STARTING MOTOR GP-ELECTRIC
207-1551 STARTING MOTOR GP-ELECTRIC
S/N HEK1-UP
24-VOLT
PART OF 128-5626 STARTING MOTOR GP-ELECTRIC
Type 1
AN ATTACHMENT
STARTING MOTOR GP-ELECTRIC
207-1551 STARTING MOTOR GP-ELECTRIC
207-1551 STARTING MOTOR GP-ELECTRIC
S/N HEK1-UP
24-VOLT
PART OF 128-5626 STARTING MOTOR GP-ELECTRIC
Type 2
AN ATTACHMENT
SWITCH GP
SWITCH GP-DISCONNECT
7N-0719 SWITCH GP-DISCONNECT
7N-0719 SWITCH GP-DISCONNECT -BATTERY
S/N HEK1-UP
PART OF 206-6030, 231-5283, 260-9483 PANEL GP-CIRCUIT BREAKER
SWITCH GP-MAGNETIC
125-1302 SWITCH GP-MAGNETIC
125-1302 SWITCH GP-MAGNETIC
S/N HEK1-UP
24-VOLT
PART OF 206-6030, 231-5283, 260-9483 PANEL GP-CIRCUIT BREAKER
SWITCH GP-MAGNETIC
223-7577 SWITCH GP-MAGNETIC
223-7577 SWITCH GP-MAGNETIC
S/N 5GG1-UP
24-VOLT
PART OF 194-1686 STARTING AID GP
ALSO AN ATTACHMENT
SWITCH GP-MAGNETIC
398-0940 SWITCH GP-MAGNETIC
398-0940 SWITCH GP-MAGNETIC
S/N 5GG4575-UP
PART OF 194-1686 STARTING AID GP
ALSO AN ATTACHMENT
SWITCH GP-ROTARY
106-0107 SWITCH GP-ROTARY
106-0107 SWITCH GP-ROTARY
S/N HEK1-UP
PART OF 186-4572 WIRING GP-CONSOLE
SWITCH GP-START
9G-7641 SWITCH GP-START
9G-7641 SWITCH GP-START -ENGINE, KEY
S/N HEK1-UP
PART OF 186-4572 WIRING GP-CONSOLE
CONTROL GP-FOOT
153-8766 CONTROL GP-FOOT
153-8766 CONTROL GP-FOOT -ELECTRONIC
S/N HEK1-UP
FOOT CONTROL
PART OF 202-7074 CONTROL AR-AUXILIARY
AN ATTACHMENT
WIRING GP
BATTERY & WIRING GP
183-1019 BATTERY & WIRING GP
183-1019 BATTERY & WIRING GP -COLD WEATHER
S/N HEK1-UP
PART OF 186-1122 STARTING AR-COLD WEATHER
AN ATTACHMENT
BATTERY & WIRING GP
214-0050 BATTERY & WIRING GP
214-0050 BATTERY & WIRING GP
S/N HEK1-190
PART OF 218-5087 CHASSIS AR
BATTERY & WIRING GP
214-0050 BATTERY & WIRING GP
214-0050 BATTERY & WIRING GP
S/N HEK191-1047
PART OF 218-5087 CHASSIS AR
BATTERY & WIRING GP
214-0050 BATTERY & WIRING GP
214-0050 BATTERY & WIRING GP
S/N HEK1048-UP
PART OF 218-5087 CHASSIS AR
WIRING GP-AUXILIARY CONTROL
183-1015 WIRING GP-AUXILIARY CONTROL
183-1015 WIRING GP-AUXILIARY CONTROL -COMBINED SYSTEMS 4 & 14
S/N HEK1-UP
PART OF 202-7075 CONTROL AR-AUXILIARY
AN ATTACHMENT
WIRING GP-AUXILIARY CONTROL
183-1017 WIRING GP-AUXILIARY CONTROL
183-1017 WIRING GP-AUXILIARY CONTROL
S/N HEK1-UP
ONE WAY/TWO PUMP FOOT SWITCH
PART OF 202-7074 CONTROL AR-AUXILIARY
AN ATTACHMENT
WIRING GP-CAB
190-1020 WIRING GP-CAB
190-1020 WIRING GP-CAB
S/N HEK1-112
PART OF 190-1040 CAB GP
WIRING GP-CAB
190-1020 WIRING GP-CAB
190-1020 WIRING GP-CAB
S/N HEK113-425
PART OF 190-1040 CAB GP
WIRING GP-CAB
190-1020 WIRING GP-CAB
190-1020 WIRING GP-CAB
S/N HEK426-699; HEK702-702
PART OF 190-1040 CAB GP
WIRING GP-CAB
190-1020 WIRING GP-CAB
190-1020 WIRING GP-CAB
S/N HEK700-701; HEK703-1071
PART OF 190-1040 CAB GP
WIRING GP-CAB
190-1020 WIRING GP-CAB
190-1020 WIRING GP-CAB
S/N HEK1072-UP
PART OF 190-1040 CAB GP
WIRING GP-COLD WEATHER
275-7219 WIRING GP-COLD WEATHER
275-7219 WIRING GP-COLD WEATHER -COOLING CIRCUIT, HYDRAULIC OIL
S/N HEK1-UP
PART OF 275-3769 COOLING AR
WIRING GP-COMBINED FLOW
213-0552 WIRING GP-COMBINED FLOW
213-0552 WIRING GP-COMBINED FLOW
S/N HEK1-UP
PART OF 200-6654 CONTROL AR-AUXILIARY
AN ATTACHMENT
WIRING GP-COMMUNICATION
238-7542 WIRING GP-COMMUNICATION
238-7542 WIRING GP-COMMUNICATION
S/N HEK1-UP
AN ATTACHMENT
WIRING GP-CONSOLE
170-6909 WIRING GP-CONSOLE
170-6909 WIRING GP-CONSOLE -LH
S/N HEK1-UP
PART OF 186-4628 WIRING GP-CONSOLE
WIRING GP-CONSOLE
186-4572 WIRING GP-CONSOLE
186-4572 WIRING GP-CONSOLE -RH
S/N HEK1-UP
PART OF 186-4628 WIRING GP-CONSOLE
186-4628 WIRING GP-CONSOLE
186-4628 WIRING GP-CONSOLE
S/N HEK1-UP
PART OF 183-9681 OPERATOR AR
WIRING GP-ENGINE
190-5038 WIRING GP-ENGINE
190-5038 WIRING GP-ENGINE
S/N 5GG831-UP
HIGH SIDE ACTIVATION OF STARTING AID HEATER RELAY
PART OF 213-9266, 237-0281 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
WIRING GP-QUICK COUPLER
204-1917 WIRING GP-QUICK COUPLER
204-1917 WIRING GP-QUICK COUPLER -QUICK
S/N HEK1-UP
PART OF 210-9919 CONTROL AR-COUPLER
AN ATTACHMENT
ELECTRONICS GP-MONITOR
SERVICE GP-MONITOR
247-5148 SERVICE GP-MONITOR
247-5148 SERVICE GP-MONITOR
S/N HEK700-701; HEK703-1071
PART OF 190-1020 WIRING GP-CAB
ELECTRONICS GP-COMMUNICATION
CONTROL GP-COMMUNICATION
242-7205 CONTROL GP-COMMUNICATION
242-7205 CONTROL GP-COMMUNICATION -PRODUCT LINK 201
S/N HEK1-UP
PART OF 240-7739 INSTALLATION GP-COMMUNICATION
FIELD REPLACEMENT ORDER @@@@@273-5723@@@@@, @@@@@273-5725@@@@@
AN ATTACHMENT
262-1421 ELECTRONICS GP-COMMUNICATION
262-1421 ELECTRONICS GP-COMMUNICATION -PRODUCT LINK 300
S/N HEK1-UP
PART OF 273-5723, 273-5725 INSTALLATION GP-COMMUNICATION
INSTALLATION GP-COMMUNICATION
240-7739 INSTALLATION GP-COMMUNICATION
240-7739 INSTALLATION GP-COMMUNICATION
S/N HEK1-UP
AN ATTACHMENT
273-5723 INSTALLATION GP-COMMUNICATION
273-5723 INSTALLATION GP-COMMUNICATION -PRODUCT LINK 321SR
S/N HEK1-UP
FIELD REPLACEMENT FOR @@@@@242-7205@@@@@
FOR USE WITH MACHINE PRODUCT LINK READY
273-5725 INSTALLATION GP-COMMUNICATION
273-5725 INSTALLATION GP-COMMUNICATION -PRODUCT LINK 300
S/N HEK1-UP
FIELD REPLACEMENT FOR @@@@@242-7205@@@@@
FOR USE WITH MACHINE NOT PRODUCT LINK READY
WIRING GP-COMMUNICATION
238-7542 WIRING GP-COMMUNICATION
238-7542 WIRING GP-COMMUNICATION
S/N HEK1-UP
AN ATTACHMENT
RADIO GP
336-3545 RADIO GP-COMMUNICATION
336-3545 RADIO GP-COMMUNICATION -PRODUCT LINK 121SR
S/N HEK1-UP
PART OF 273-5723 INSTALLATION GP-COMMUNICATION
HARNESS GP
195-7336 HARNESS AS-ENGINE
195-7336 HARNESS AS-ENGINE
S/N 5GG1-UP
PART OF 190-5038 WIRING GP-ENGINE
ALSO AN ATTACHMENT

Information:

(For parts list, see above)

Special Instruction
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation of 244-1090 Alarm Gp {7400, 7402, 7407}
Installation of 244-1090 Alarm Gp {7400, 7402, 7407}
Installation of 262-6141 Alarm Gp {7406}
Installation of 262-6141 Alarm Gp {7406}
Specifications
Alternator and Air Compressor Mounting Group
3126B Engine for Caterpillar Built Machines
Alternator and Regulator
3126B Engine for Caterpillar Built Machines
Testing and Adjusting
Charging System - Test
3126B Engines
Troubleshooting
Alternator - Noisy Operation
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Alternator - Charging Problem
3126B Engine for Caterpillar Built Machines
Disassembly and Assembly
Alternator - Remove and Install
3126B Engines for Caterpillar Built Machines
Truck Engine News
Coolant/Battery Tester Group Quickly Tests Coolant and Battery Acid {0773, 0785}
2004/12/01
Engine News
Technical Information Bulletin
Procedure for Starting an Engine in Cold Weather{1000, 1090, 1250, 1348, 1450, 1453, 1456, 1900}
Procedure for Starting an Engine in Cold Weather{1000, 1090, 1250, 1348, 1450, 1453, 1456, 1900}
Recommendations for Battery Charging and Temperatures for Machines and Generator Sets{1401, 751B}
Recommendations for Battery Charging and Temperatures for Machines and Generator Sets{1401, 751B}
Process for Communicating an Incident with a Battery{1401}
Process for Communicating an Incident with a Battery{1401}
Testing and Adjusting
Battery - Test
3126B Engines
Troubleshooting
CID 0168 FMI 02 System Voltage intermittent/erratic
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 0168 FMI 01 System Voltage Low
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0168 FMI 00 System Voltage High
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Battery
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
Electrical Power Supply Circuit - Test
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
Electrical Power Supply Circuit - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Service Magazine
Coolant/Battery Tester Group Quickly Tests Coolant and Battery Acid {0773, 0785}
2004/12/01
Tool Operating Manual
Communication Adapter II{0600, 0709, 7600, 7610}
Communication Adapter II{0600, 0709, 7600, 7610}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Troubleshooting
CID 0168 FMI 02 System Voltage intermittent/erratic
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0168 FMI 01 System Voltage Low
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0168 FMI 00 System Voltage High
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Electrical Power Supply Circuit - Test
3126B Engine for Caterpillar Built Machines
Electrical Power Supply Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Service Magazine
New Radio Software Is Now Available For Product Link 522 and 523 Radio On All Cat <SUP>&reg;</SUP> Products {7610, 7620}
2014/02/06
Truck Engine News
Do Not Use the 261-3363 Wireless Communication Adapter with Model Year 2007 Cat Engines and Transmissions in On-Highway Trucks {0785, 1930, 7620}
2007/10/01
Engine News
277-4734 Bypass Harness Assembly Allows Cat Electronic Technician (Cat ET) to Communicate with ADEM IV:E2 Electronic Control Modules {0779, 0785, 1901, 1930}
2006/09/04
The Programmable Monitoring System Parameters Have New Descriptions {1901, 1902, 7620}
2007/10/22
Special Instruction
Using the 217-0114 Adapter Cable As {0709, 1901, 1920}
Using the 217-0114 Adapter Cable As {0709, 1901, 1920}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Technical Information Bulletin
Procedure for Starting an Engine in Cold Weather{1000, 1090, 1250, 1348, 1450, 1453, 1456, 1900}
Procedure for Starting an Engine in Cold Weather{1000, 1090, 1250, 1348, 1450, 1453, 1456, 1900}
Troubleshooting
Electronic Display Module - If Equipped
3126B Engine for Caterpillar Built Machines
Factory Passwords Worksheet
3126B Engine for Caterpillar Built Machines
Alternator - Noisy Operation
3126B Engine for Caterpillar Built Machines
ECM Will Not Communicate with Other Systems or Display Modules
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0168 FMI 02 System Voltage intermittent/erratic
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0168 FMI 01 System Voltage Low
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0168 FMI 00 System Voltage High
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0268 FMI 02 Check Programmable Parameters
3126B Engine for Caterpillar Built Machines
CID 0562 FMI 09 Unable to Communicate with Cat Monitoring System
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Event Codes
3126B Engine for Caterpillar Built Machines
Self-Diagnostics
3126B Engine for Caterpillar Built Machines
Flash Programming
3126B Engine for Caterpillar Built Machines
CID 0254 FMI 12 Electronic Control Module Error
3126B Engine for Caterpillar Built Machines
CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Electronic Service Tool Will Not Communicate with ECM
3126B Engine for Caterpillar Built Machines
CID 0041 FMI 04 8 Volt DC Supply short to ground
3126B Engine for Caterpillar Built Machines
CID 0248 FMI 09 Cat Data Link not communicating
3126B Engine for Caterpillar Built Machines
CID 0091 FMI 08 Throttle Position signal abnormal
3126B Engine for Caterpillar Built Machines
CID 0296 FMI 09 Unable to communicate with Transmission ECM
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0267 FMI 02 Incorrect Engine Shutdown Switch inputs
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Diagnostic Codes
3126B Engine for Caterpillar Built Machines
CID 0041 FMI 03 8 Volt DC Supply short to +batt
3126B Engine for Caterpillar Built Machines
How To Use the Functional Tests
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
E015 High Engine Coolant Temperature Derate
3126B Engine for Caterpillar Built Machines
E017 High Engine Coolant Temperature Warning
3126B Engine for Caterpillar Built Machines
E025 High Inlet Air Temperature Derate
3126B Engine for Caterpillar Built Machines
E027 High Inlet Air Temperature Warning
3126B Engine for Caterpillar Built Machines
E039 Low Engine Oil Pressure Derate
3126B Engine for Caterpillar Built Machines
E100 Low Engine Oil Pressure Warning
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
E096 High Fuel Pressure
3126B Engine for Caterpillar Built Machines
E190 Engine Overspeed Warning
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Cat Data Link Circuit - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Diagnostic Codes
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
E053 Low Fuel Pressure Warning
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
E272 Inlet Air Restriction Warning
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
System Configuration Parameters
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
System Overview
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0549 FMI 02 Incorrect Throttle Lock Switch inputs
3126B Engine for Caterpillar Built Machines
Programming Parameters
3126B Engine for Caterpillar Built Machines
E095 Fuel Filter Restriction Warning
3126B Engine for Caterpillar Built Machines
Cat Data Link Circuit - Test
3126B Engine for Caterpillar Built Machines
Replacing the ECM
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
System Configuration Parameters
3126B Engine for Caterpillar Built Machines
Diagnostic Codes
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
System Configuration Parameters
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
Alternator - Charging Problem
3126B Engine for Caterpillar Built Machines
CID 0253 FMI 02 Personality Module mismatch
3126B Engine for Caterpillar Built Machines
User Defined Shutdown Input Circuit - Test
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
Factory Passwords
3126B Engine for Caterpillar Built Machines
CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
ECM Will Not Accept Factory Passwords
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
Disassembly and Assembly
Electronic Control Module - Remove and Install
3126B Engines for Caterpillar Built Machines
Service Magazine
New Service Information Tool for CAT Dealers is Now Available {1900}
2002/06/17
Update on the Factory Password System {1901, 7620}
2008/02/11
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2014/01/27
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
Engine News
The Programmable Monitoring System Parameters Have New Descriptions {1901, 1902, 7620}
2007/10/22
Special Instruction
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Troubleshooting
CID 0296 FMI 09 Unable to communicate with Transmission ECM
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Service Magazine
277-2362 Transmission Analyzer III Group Offers Upgraded Diagnostic Capabilities {0769, 0779, 0783}
2007/10/22
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2014/01/27
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
Troubleshooting
CID 0291 FMI 05 Engine Cooling Fan Solenoid open circuit
3126B Engine for Caterpillar Built Machines
CID 0291 FMI 06 Engine Cooling Fan Solenoid short to ground
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Special Instruction
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Service Magazine
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2014/01/27
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
Engine News
The Programmable Monitoring System Parameters Have New Descriptions {1901, 1902, 7620}
2007/10/22
Special Instruction
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Tool Operating Manual
Communication Adapter II{0600, 0709, 7600, 7610}
Communication Adapter II{0600, 0709, 7600, 7610}
Troubleshooting
CID 0296 FMI 09 Unable to communicate with Transmission ECM
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Service Magazine
A New Version of Caterpillar Electronic Technician (ET) is Now Available {0785, 7600, 7610}
2008/05/19
New Firmware Is Now Available for Communications Adapter 3 {7610, 7620}
2011/10/20
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2014/01/27
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2014/01/27
"Maintenance Mode" in Product Link is Used to Prevent Codes From Being Transmitted When Performing Service to a Machine or Engine {7606}
2014/11/24
Troubleshooting
Factory Passwords Worksheet
3126B Engine for Caterpillar Built Machines
Factory Passwords
3126B Engine for Caterpillar Built Machines
Special Instruction
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Specifications
Engine Oil Pressure Sensor - If Equipped
3126B Engine for Caterpillar Built Machines
Atmospheric Pressure Sensor - If Equipped
3126B Engine for Caterpillar Built Machines
Inlet Air Temperature Sensor
3126B Engine for Caterpillar Built Machines
Injection Actuation Pressure Sensor
3126B Engine for Caterpillar Built Machines
Coolant Temperature Sensor
3126B Engine for Caterpillar Built Machines
Engine Oil Temperature Sensor
3126B Engine for Caterpillar Built Machines
Fuel Pressure Sensor
3126B Engine for Caterpillar Built Machines
Speed/Timing Sensor
3126B Engine for Caterpillar Built Machines
Turbocharger Outlet Pressure Sensor
3126B Engine for Caterpillar Built Machines
Turbocharger Inlet Pressure Sensor
3126B Engine for Caterpillar Built Machines
Speed Sensor
3126B Engine for Caterpillar Built Machines
Tool Operating Manual
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Troubleshooting
CID 0261 FMI 13 Engine Timing Calibration required
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0100 FMI 04 Engine Oil Pressure short to ground
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
3126B Engine for Caterpillar Built Machines
CID 0172 FMI 04 Intake Manifold Air Temp short to ground
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 0273 FMI 03 Turbo Outlet Pressure open/short to +batt
3126B Engine for Caterpillar Built Machines
CID 0273 FMI 04 Turbo Outlet Pressure short to ground
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 0274 FMI 04 Atmospheric Pressure short to ground
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0041 FMI 04 8 Volt DC Supply short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0091 FMI 08 Throttle Position signal abnormal
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0094 FMI 03 Fuel Pressure open/short to +batt
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0094 FMI 04 Fuel Pressure short to ground
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 0110 FMI 04 Engine Coolant Temperature short to ground
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0164 FMI 00 High Injector Actuation Pressure
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0164 FMI 03 Injector Actuation Pressure voltage high
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0175 FMI 03 Engine Oil Temperature open/short to +batt
3126B Engine for Caterpillar Built Machines
CID 0175 FMI 04 Engine Oil Temperature short to ground
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0600 FMI 03 Hydraulic Oil Temperature open/short to +batt
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0600 FMI 04 Hydraulic Oil Temperature short to ground
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0041 FMI 03 8 Volt DC Supply short to +batt
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
How To Use the Functional Tests
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Sensors and Electrical Connectors
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 0091 FMI 08 Throttle Position signal abnormal
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 0164 FMI 11 Injector Actuation Pressure system fault
3126B Engine for Caterpillar Built Machines
CID 0190 FMI 02 Loss of Engine Speed Signal
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 0190 FMI 11 Engine Speed Sensor mechanical failure
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
5 Volt Engine Pressure Sensor Supply Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Engine Speed/Timing Sensor Circuit - Test
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
Engine Speed/Timing Sensor - Calibrate
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Throttle Position Sensor Circuit - Test
3126B Engine for Caterpillar Built Machines
Digital Sensor Supply Circuit - Test
3126B Engine for Caterpillar Built Machines
Digital Sensor Supply Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Throttle Position Sensor Circuit - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 1582 FMI 03 Trans Lube Oil Temp Sensor open/short to +batt
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 1582 FMI 04 Trans Lube Oil Temp Sensor short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 1589 FMI 03 Turbo Inlet Air Pressure Sensor open/shrt to +bat
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Sensors and Electrical Connectors
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0342 FMI 03 Secondary Engine Speed open/short to +batt
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Analog Sensor Supply Circuit - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
5 Volt Engine Pressure Sensor Supply Circuit - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0164 FMI 02 Injector Actuation Pressure signal erratic
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0342 FMI 02 Loss of Secondary Engine Speed signal
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
Engine Temperature Sensor Open or Short Circuit - Test
3126B Engine for Caterpillar Built Machines
CID 0164 FMI 04 Injector Actuation Pressure voltage low
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Engine Pressure Sensor Open or Short Circuit - Test
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
E095 Fuel Filter Restriction Warning
3126B Engine for Caterpillar Built Machines
CID 0342 FMI 11 Secondary Engine Speed Sensor mechanical failure
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Injection Actuation Pressure Sensor - Test
3126B Engine for Caterpillar Built Machines
Sensors and Electrical Connectors
3126B Engine for Caterpillar Built Machines
5 Volt Engine Pressure Sensor Supply Circuit - Test
3126B Engine for Caterpillar Built Machines
Engine Pressure Sensor Open or Short Circuit - Test
3126B Engine for Caterpillar Built Machines
Engine Temperature Sensor Open or Short Circuit - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Sensors and Electrical Connectors
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Analog Sensor Supply Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 1589 FMI 04 Turbo Inlet Air Pressure Sensor short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Service Magazine
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04
Troubleshooting
CID 0291 FMI 05 Engine Cooling Fan Solenoid open circuit
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0291 FMI 06 Engine Cooling Fan Solenoid short to ground
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Engine Fan Control Solenoid Circuit - Test
3126B Engine for Caterpillar Built Machines
Engine Fan Control Solenoid Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Engine Fan Reversing Solenoid Circuit - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0485 FMI 03 Engine Fan Rev Solenoid short to +batt
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0485 FMI 04 Engine Fan Rev Solenoid short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Disassembly and Assembly
Air Inlet Heater Solenoid - Remove and Install
3126B Engines for Caterpillar Built Machines
Technical Information Bulletin
Procedure for Starting an Engine in Cold Weather{1000, 1090, 1250, 1348, 1450, 1453, 1456, 1900}
Procedure for Starting an Engine in Cold Weather{1000, 1090, 1250, 1348, 1450, 1453, 1456, 1900}
Service Magazine
A New Ether Cylinder O-ring is Now Used on All Caterpillar Products {1456}
2013/09/19
Engine News
Caterpillar Remanufactured Electric Starting Motors Are Improved {1453}
2011/05/16
Special Instruction
Caterpillar PRELUB<SUP>&reg;</SUP> Diagnostics{1469}
Caterpillar PRELUB® Diagnostics{1469}
Technical Information Bulletin
Procedure for Starting an Engine in Cold Weather{1000, 1090, 1250, 1348, 1450, 1453, 1456, 1900}
Procedure for Starting an Engine in Cold Weather{1000, 1090, 1250, 1348, 1450, 1453, 1456, 1900}
Specifications
Electric Starting Motor
3126B Engine for Caterpillar Built Machines
Testing and Adjusting
Pinion Clearance - Adjust
3126B Engines
Electric Starting System - Test
3126B Engines
Disassembly and Assembly
Electric Starting Motor - Remove and Install
3126B Engines for Caterpillar Built Machines
Service Magazine
Examine Failed Starting Motors to Understand the Reason for Failure {1453}
2002/10/28
Specifications
Engine Oil Level Switch - If Equipped
3126B Engine for Caterpillar Built Machines
Troubleshooting
CID 0267 FMI 02 Incorrect Engine Shutdown Switch inputs
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
How To Use the Functional Tests
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Throttle Switch Circuit - Test
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
Throttle Lock Switch Circuit - Test
3126B Engine for Caterpillar Built Machines
Engine Shutdown Switch Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Engine Shutdown Switch Circuit - Test
3126B Engine for Caterpillar Built Machines
Service Magazine
A New Oil Pressure Switch is Now Available {7421}
2005/05/09
An Improved 5P-8500 Key Is Now Available {1416, 1416, 7000, 7000}
2011/12/01
Truck Engine News
Coolant/Battery Tester Group Quickly Tests Coolant and Battery Acid {0773, 0785}
2004/12/01
Do Not Use the 261-3363 Wireless Communication Adapter with Model Year 2007 Cat Engines and Transmissions in On-Highway Trucks {0785, 1930, 7620}
2007/10/01
Engine News
The 237-5130 Digital Multimeter Gp Features a Built-in Infrared Thermometer {0785}
2004/04/19
Coolant/Battery Tester Group Quickly Tests Coolant and Battery Acid {0773, 0785}
2004/12/01
260-5800 Electrical Test Group Packages Digital Multimeter, Clamp-on Ammeter, Current Detector, and Test Leads in Convenient Carrying Case {0785}
2005/03/07
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20
Enhanced Voltmeter Leads Are Now Available {0785}
2006/02/13
Test Cable Group Checks Three-Wire, Active Analog Circuits That Are Used in Sensors {0779, 0785}
2006/10/16
277-4734 Bypass Harness Assembly Allows Cat Electronic Technician (Cat ET) to Communicate with ADEM IV:E2 Electronic Control Modules {0779, 0785, 1901, 1930}
2006/09/04
Special Instruction
An Aid To Reading Multimeter Scales{0785}
An Aid To Reading Multimeter Scales{0785}
Tool Operating Manual
348-5430 Multi-Tool Gp 2 {0709, 0769, 0785}
348-5430 Multi-Tool Gp 2 {0709, 0769, 0785}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the Communications Adapter 3{1900}
Using the Communications Adapter 3{1900}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
146-4080 Digital Multimeter Specification, Testing, and Maintenance Manual{0374, 0599, 0709}
146-4080 Digital Multimeter Specification, Testing, and Maintenance Manual{0374, 0599, 0709}
Communication Adapter II{0600, 0709, 7600, 7610}
Communication Adapter II{0600, 0709, 7600, 7610}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709}
131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Troubleshooting
Factory Passwords Worksheet
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Electronic Service Tool Will Not Communicate with ECM
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Electronic Service Tools
3126B Engine for Caterpillar Built Machines
Factory Passwords
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Service Magazine
Diagnostic Cables and Harnesses Are Available {0785}
2014/08/11
Caterpillar Electronic Technician (Cat ET) 2001B-Service Pack 1 Software Upgrade is Now Available {0785}
2002/02/11
New Service Information Tool for CAT Dealers is Now Available {1900}
2002/06/17
2002A Service Pack 1 for Caterpillar Electronic Technician (Cat ET) is Now Available {0785}
2002/08/19
Coolant/Battery Tester Group Quickly Tests Coolant and Battery Acid {0773, 0785}
2004/12/01
260-5800 Electrical Test Group Packages Digital Multimeter, Clamp-on Ammeter, Current Detector, and Test Leads in Convenient Carrying Case {0785}
2005/03/07
The 285-0910 Multi-Tool Gp Incorporates Four Diagnostic Tools into a Single, Hand Held Unit {0774, 0779, 0781, 0782}
2006/11/27
New 271-8590 Analyzer Gp (24-Volt) Quickly Identifies Starting and Charging System Problems {0709, 1406}
2006/10/02
277-2362 Transmission Analyzer III Group Offers Upgraded Diagnostic Capabilities {0769, 0779, 0783}
2007/10/22
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
New Firmware Is Now Available for Communications Adapter 3 {7610, 7620}
2011/10/20
New Software For Cat<SUP>&reg;</SUP> ET Can Now Be Used For All Caterpillar Products {0785, 7606}
2013/08/15
Troubleshooting
Injection Actuation Pressure Control Valve Circuit - Test
3126B Engine for Caterpillar Built Machines
Special Instruction
Installation of 244-1090 Alarm Gp {7400, 7402, 7407}
Installation of 244-1090 Alarm Gp {7400, 7402, 7407}
Engine News
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Specifications
Electronic Control Wiring Group
3126B Engine for Caterpillar Built Machines
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Testing and Adjusting
Electric Starting System - Test
3126B Engines
Troubleshooting
CID 0168 FMI 02 System Voltage intermittent/erratic
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0168 FMI 01 System Voltage Low
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0168 FMI 00 System Voltage High
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0291 FMI 05 Engine Cooling Fan Solenoid open circuit
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0291 FMI 06 Engine Cooling Fan Solenoid short to ground
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Electrical Connectors - Inspect
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0100 FMI 04 Engine Oil Pressure short to ground
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
3126B Engine for Caterpillar Built Machines
CID 0172 FMI 04 Intake Manifold Air Temp short to ground
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 0273 FMI 03 Turbo Outlet Pressure open/short to +batt
3126B Engine for Caterpillar Built Machines
CID 0273 FMI 04 Turbo Outlet Pressure short to ground
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 0274 FMI 04 Atmospheric Pressure short to ground
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0041 FMI 04 8 Volt DC Supply short to ground
3126B Engine for Caterpillar Built Machines
CID 0248 FMI 09 Cat Data Link not communicating
3126B Engine for Caterpillar Built Machines
CID 0091 FMI 08 Throttle Position signal abnormal
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0548 FMI 06 Throttle Lock Lamp short
3126B Engine for Caterpillar Built Machines
CID 0548 FMI 05 Throttle Lock Lamp open circuit
3126B Engine for Caterpillar Built Machines
CID 0042 FMI 11 Inject Actuation Control Valve open/short
3126B Engine for Caterpillar Built Machines
CID 0094 FMI 03 Fuel Pressure open/short to +batt
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0094 FMI 04 Fuel Pressure short to ground
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 0110 FMI 04 Engine Coolant Temperature short to ground
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0164 FMI 00 High Injector Actuation Pressure
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0164 FMI 03 Injector Actuation Pressure voltage high
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0175 FMI 03 Engine Oil Temperature open/short to +batt
3126B Engine for Caterpillar Built Machines
CID 0175 FMI 04 Engine Oil Temperature short to ground
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0267 FMI 02 Incorrect Engine Shutdown Switch inputs
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0600 FMI 03 Hydraulic Oil Temperature open/short to +batt
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0600 FMI 04 Hydraulic Oil Temperature short to ground
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0041 FMI 03 8 Volt DC Supply short to +batt
3126B Engine for Caterpillar Built Machines
How To Use the Functional Tests
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Sensors and Electrical Connectors
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 0091 FMI 08 Throttle Position signal abnormal
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 0164 FMI 11 Injector Actuation Pressure system fault
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 0190 FMI 02 Loss of Engine Speed Signal
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 0190 FMI 11 Engine Speed Sensor mechanical failure
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0617 FMI 05 Air Inlet Heater Relay open/current below normal
3126B Engine for Caterpillar Built Machines
CID 1627 FMI 05 Fuel Pump Relay open circuit
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 1627 FMI 06 Fuel Pump Relay short to ground
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
5 Volt Engine Pressure Sensor Supply Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Cat Data Link Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Engine Speed/Timing Sensor Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Injection Actuation Pressure Control Valve Circuit - Test
3126B Engine for Caterpillar Built Machines
Throttle Switch Circuit - Test
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
Low Engine Oil Pressure Lamp Circuit - Test
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
Air Inlet Heater Circuit - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Throttle Position Sensor Circuit - Test
3126B Engine for Caterpillar Built Machines
Digital Sensor Supply Circuit - Test
3126B Engine for Caterpillar Built Machines
Electrical Power Supply Circuit - Test
3126B Engine for Caterpillar Built Machines
CID 0290 FMI 03 Engine Fan Pump Pressure open/short to +batt
3126B Engine for Caterpillar Built Machines
CID 0290 FMI 04 Engine Fan Pump Pressure short to ground
3126B Engine for Caterpillar Built Machines
Engine Fan Control Solenoid Circuit - Test
3126B Engine for Caterpillar Built Machines
Throttle Lock Switch Circuit - Test
3126B Engine for Caterpillar Built Machines
Throttle Lock Lamp Circuit - Test
3126B Engine for Caterpillar Built Machines
Digital Sensor Supply Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Throttle Position Sensor Circuit - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Electrical Power Supply Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Fuel Pump Relay Circuit - Test
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 1582 FMI 03 Trans Lube Oil Temp Sensor open/short to +batt
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 1582 FMI 04 Trans Lube Oil Temp Sensor short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 1589 FMI 03 Turbo Inlet Air Pressure Sensor open/shrt to +bat
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Air Filter Restriction Lamp - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Engine Shutdown Switch Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Engine Fan Control Solenoid Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0617 FMI 05 Air Inlet Heater Relay open/current below normal
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0617 FMI 06 Air Inlet Heater Relay grounded/current above norm
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Sensors and Electrical Connectors
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0342 FMI 03 Secondary Engine Speed open/short to +batt
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Engine Shutdown Switch Circuit - Test
3126B Engine for Caterpillar Built Machines
Engine Fan Reversing Solenoid Circuit - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0164 FMI 02 Injector Actuation Pressure signal erratic
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0342 FMI 02 Loss of Secondary Engine Speed signal
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
Air Inlet Heater Circuit - Test
3126B Engine for Caterpillar Built Machines
CID 0164 FMI 04 Injector Actuation Pressure voltage low
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Engine Pressure Sensor Open or Short Circuit - Test
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 0342 FMI 11 Secondary Engine Speed Sensor mechanical failure
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Cat Data Link Circuit - Test
3126B Engine for Caterpillar Built Machines
Sensors and Electrical Connectors
3126B Engine for Caterpillar Built Machines
5 Volt Engine Pressure Sensor Supply Circuit - Test
3126B Engine for Caterpillar Built Machines
Engine Pressure Sensor Open or Short Circuit - Test
3126B Engine for Caterpillar Built Machines
Sensors and Electrical Connectors
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Analog Sensor Supply Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0485 FMI 03 Engine Fan Rev Solenoid short to +batt
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0485 FMI 04 Engine Fan Rev Solenoid short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Engine Wiring Information
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 1589 FMI 04 Turbo Inlet Air Pressure Sensor short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0617 FMI 06 Air Inlet Heater Relay grounded/current above norm
3126B Engine for Caterpillar Built Machines
Service Magazine
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04
Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2012/03/05
Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08
Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21
Tool Operating Manual
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Troubleshooting
CID 0617 FMI 05 Air Inlet Heater Relay open/current below normal
3126B Engine for Caterpillar Built Machines
CID 1627 FMI 05 Fuel Pump Relay open circuit
3126B Engine for Caterpillar Built Machines
CID 1627 FMI 06 Fuel Pump Relay short to ground
3126B Engine for Caterpillar Built Machines
CID 0617 FMI 05 Air Inlet Heater Relay open/current below normal
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0617 FMI 06 Air Inlet Heater Relay grounded/current above norm
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0617 FMI 06 Air Inlet Heater Relay grounded/current above norm
3126B Engine for Caterpillar Built Machines
Special Instruction
Diesel Particulate Filter Monitoring System {108F, 7490}
Diesel Particulate Filter Monitoring System {108F, 7490}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Tool Operating Manual
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Troubleshooting
Electronic Display Module - If Equipped
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 0562 FMI 09 Unable to Communicate with Cat Monitoring System
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0286 FMI 05 EMS Oil Lamp open/short to ground
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 0286 FMI 06 EMS Oil Lamp short to +batt
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
Low Engine Oil Pressure Lamp Circuit - Test
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
Air Filter Restriction Lamp - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Service Magazine
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2014/01/27
Improved VisionLink<SUP>TM</SUP> Software Is Now Available for Certain Caterpillar Machines {7601}
2012/06/07
New Software Is Now Available for Cat<SUP>&reg;</SUP> Product Link 522 Systems {7494, 7606, 7620}
2012/12/14
Procedure For Improving Compatibility of Product Link Is Now Available on Caterpillar Machines Equipped with Electronic Monitoring Systems (EMS) {7490, 7606}
2013/04/04
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
New Inspection and Repair Procedure Is Now Available for Cat<SUP>&reg;</SUP> Products Located in India Equipped with Product Link {7606}
2014/09/16
New Software Is Now Available for All Cat<SUP>&reg;</SUP> Products With PL522 China System {7606, 7620}
2015/03/04
New Troubleshooting Procedure Is Now Available for all Cat<SUP>&reg;</SUP> Products Equipped with PL321 VIMS (PL321 VSR) {7606}
2015/05/12
Special Instruction
Installation Instructions for Jacket Water Heaters with Seal Kits{1383}
Installation Instructions for Jacket Water Heaters with Seal Kits{1383}
Technical Information Bulletin
Procedure for Starting an Engine in Cold Weather{1000, 1090, 1250, 1348, 1450, 1453, 1456, 1900}
Procedure for Starting an Engine in Cold Weather{1000, 1090, 1250, 1348, 1450, 1453, 1456, 1900}
Specifications
Air Inlet Heater
3126B Engine for Caterpillar Built Machines
Electronic Control Wiring Group
3126B Engine for Caterpillar Built Machines
Troubleshooting
CID 0617 FMI 05 Air Inlet Heater Relay open/current below normal
3126B Engine for Caterpillar Built Machines
Air Inlet Heater Circuit - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0617 FMI 05 Air Inlet Heater Relay open/current below normal
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0617 FMI 06 Air Inlet Heater Relay grounded/current above norm
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Air Inlet Heater Circuit - Test
3126B Engine for Caterpillar Built Machines
CID 0617 FMI 06 Air Inlet Heater Relay grounded/current above norm
3126B Engine for Caterpillar Built Machines
Special Instruction
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Service Magazine
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2014/01/27
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
Special Instruction
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Technical Information Bulletin
Product Link Registration Problems{733T, 7606}
Product Link Registration Problems{733T, 7606}
Updating to Latest VIMS3G Flash Files And Configuration Files Available For Cat<SUP>&reg;</SUP> Machines Equipped With VIMS3G{7601, 7620}
Updating to Latest VIMS3G Flash Files And Configuration Files Available For Cat® Machines Equipped With VIMS3G{7601, 7620}
Improper Customer Access and Asset Merging Within VisionLink<SUP>TM</SUP> and PartStore<SUP>TM</SUP> Through UCID Consolidation{7567, 7606}
Improper Customer Access and Asset Merging Within VisionLinkTM and PartStoreTM Through UCID Consolidation{7567, 7606}
Tool Operating Manual
Communication Adapter II{0600, 0709, 7600, 7610}
Communication Adapter II{0600, 0709, 7600, 7610}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Service Magazine
New Flash File Software Is Used for Product Link 151/201 {7606, 7620}
2002/07/15
New Flexible Antenna Whip Available for Product Link {7606}
2002/12/02
New Processes Improve Registration of Product Link {7338, 7606}
2008/04/14
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2014/01/27
New Software Is Now Available for Product Link (PL 121) {7602, 7610, 7620}
2011/12/15
New Software Is Now Available for Cat<SUP>&reg;</SUP> Product Link 522 Systems {7494, 7606, 7620}
2012/12/14
Improved Process for Activating Product Link PL522 On Assets In China {7606}
2012/11/19
Improved VisionLink And VisionLink Store Software Are Now Available for All Caterpillar Products {7606, 7620}
2014/12/23
New Software Is Now Available For Product Link 522 Systems On All Cat<SUP>&reg;</SUP> Products {7606, 7620}
2013/04/22
Procedure For Improving Compatibility of Product Link Is Now Available on Caterpillar Machines Equipped with Electronic Monitoring Systems (EMS) {7490, 7606}
2013/04/04
Improved VisionLink<SUP>TM</SUP>Store is Now Available for all Caterpillar Products {7606}
2013/03/29
Device Transfers Are Now Supported In VisionLink<SUP>TM</SUP> Store {7606}
2013/03/29
Improved VisionLink<SUP>TM</SUP> Store for Minimizing Delay in Appearance of VisionLink Store - Modules is Now Available for All Caterpillar Products {7606}
2013/03/29
New Product Link Software for PL121 and PL300 Is Now Available for All Cat<SUP>&reg;</SUP> Products {7606, 7610, 7620}
2013/05/02
New Software Is Now Available for All Cat<SUP>&reg;</SUP> Products With The Product Link 522 System {7606}
2013/07/22
New Product Link Software for PL300 Is Now Available for All Cat<SUP>&reg;</SUP> Products {7606, 7620}
2013/07/08
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
New Software For Cat<SUP>&reg;</SUP> ET Can Now Be Used For All Caterpillar Products {0785, 7606}
2013/08/15
New Software Is Now Available For All Cat<SUP>&reg;</SUP> Products With PL522 China System {7606, 7620}
2013/08/19
Procedure for Improving Antenna Communication on All Machines Equipped With Product Link {733B, 7606}
2013/09/16
Improvements for Products and Systems Connected to Product Link {7606}
2013/10/02
New Product Link Software for PL300 Is Now Available for All Cat <SUP>&reg;</SUP>Products {7606, 7620}
2013/10/21
New Software Is Now Available for All Cat<SUP>&reg;</SUP> Products With The Product Link PL421 or Product Link PL420 System {7606, 7620}
2013/10/02
New Software for Product Link PL522 Module Is Now Available for All Cat<SUP>&reg;</SUP> Products {7606}
2014/08/08
Loss of Daily Reports May Be an Indicator of End of Life for the Product Link<SUP>&reg;</SUP> ECM on PL321SR and PL321VSR Systems {7606}
2014/06/24
Capturing Engine Stop Messages and Idle Information on All Caterpillar Products Equipped with Product Link 522 {7606}
2014/07/25
Service Meter Adjustment Is Now Available in VisionLink<SUP>TM</SUP> {7478, 7606}
2014/08/20
New Inspection and Repair Procedure Is Now Available for Cat<SUP>&reg;</SUP> Products Located in India Equipped with Product Link {7606}
2014/09/16
"Maintenance Mode" in Product Link is Used to Prevent Codes From Being Transmitted When Performing Service to a Machine or Engine {7606}
2014/11/24
Revision to "Reports and Messages Not Available" Troubleshooting Procedure for Cat<SUP>&reg;</SUP> Products with Cat<SUP>&reg;</SUP> Product Link 121/321 {7606}
2014/12/24
Event Codes (E2131, E2132, or E2133) Appearing Occasionally with On-board Machine Systems with a PL321, or PL121 Satellite System Installed {7600, 7606}
2015/01/06
Procedure to Improve Reporting into VisionLink after Re-Registration of Product Link Systems PL121/321 {7606}
2015/03/17
New Software Is Now Available for All Cat<SUP>&reg;</SUP> Products With PL522 China System {7606, 7620}
2015/03/04
New Software for Product Link PL522 Module Is Now Available for All Cat<SUP>&reg;</SUP> Products {7606, 7620}
2015/06/26
New Troubleshooting Procedure Is Now Available for all Cat<SUP>&reg;</SUP> Products Equipped with PL321 VIMS (PL321 VSR) {7606}
2015/05/12
New Product Link Software for PL300 Is Now Available for All Cat<SUP>&reg;</SUP> Products {7606, 7620}
2015/09/11
Special Instruction
Generic Installation of the WAVS Cleaning System{7348}
Generic Installation of the WAVS Cleaning System{7348}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Service Magazine
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2014/01/27
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
Service Meter Adjustment Is Now Available in VisionLink<SUP>TM</SUP> {7478, 7606}
2014/08/20
A New Antenna For The Product Link Is Available {7010, 733T}
2008/06/09
Tool Operating Manual
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Truck sale:

2005 CAT 322C
Call 
2005 CAT 322C

WORKING MACHINES S.A. DE C.V.
San Juan De Los Lagos, Jalisco, Mexico
 
Call 
2004 CAT 322C

Maquinaria Intertorito S.A. de C.V.
Tlalnepantla, Distrito Federal, Mexico
2004 CAT 322C
USD $62,487 
2004 CAT 322C

Nationwide Machinery Sales & Hire
Dubbo, NSW, Australia
CAT 322C
Call 
CAT 322C

Drill Worx
Blauvelt, New York
2003 CAT 322C
 
2003 CAT 322C

Four-D Equipment
Florida
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.