AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

C-16 Truck Engine W1A00001-UP BASIC ENGINE Caterpillar SIS



TRUCK ENGINE C16 TRUCK ENGINE W1A
 C-16 Truck Engine W1A00001-UP SEBP3679 C16 W1A   (2001)

Parts group C16:

  For full view, you need register
BASIC ENGINE
AIR COMPRESSOR GP
AIR COMPRESSOR GP
172-4306 AIR COMPRESSOR GP
172-4306 AIR COMPRESSOR GP
PART OF 172-4307, 238-4508 AIR COMPRESSOR GP
AIR COMPRESSOR GP
172-4307 AIR COMPRESSOR GP
172-4307 AIR COMPRESSOR GP
S/N W1A1-184
GEAR RATIO 1:1.2, 27 CFM
FOR USE WITH NON-BOOSTED AIR INTAKE
AIR COMPRESSOR GP
175-6779 AIR COMPRESSOR GP
175-6779 AIR COMPRESSOR GP
PART OF 354-7534 AIR COMPRESSOR GP
FOR USE WITH NON-BOOSTED AIR INTAKE
AIR COMPRESSOR GP
238-4508 AIR COMPRESSOR GP
238-4508 AIR COMPRESSOR GP
S/N W1A400-UP
GEAR DRIVEN RATIO: 1:1.2. 27 CFM TWIN CYLINDER, STEEL COOLANT AND OIL LINES
FOR USE WITH NON-BOOSTED AIR INTAKE
AIR COMPRESSOR GP
354-7534 AIR COMPRESSOR GP
354-7534 AIR COMPRESSOR GP
PART OF 172-4306 AIR COMPRESSOR GP
COVER GP-AIR COMPRESSOR
128-6036 COVER GP-AIR COMPRESSOR
128-6036 COVER GP-AIR COMPRESSOR
S/N W1A1-399
FOR USE WITH ENGINES NOT EQUIPPED WITH AIR COMPRESSOR
COVER GP-AIR COMPRESSOR
235-2492 COVER GP-AIR COMPRESSOR
235-2492 COVER GP-AIR COMPRESSOR
S/N W1A400-11212
COVER GP-AIR COMPRESSOR
235-2492 COVER GP-AIR COMPRESSOR
235-2492 COVER GP-AIR COMPRESSOR
S/N W1A11213-UP
FITTING GP-AIR COMPRESSOR
197-9640 FITTING GP-AIR COMPRESSOR
197-9640 FITTING GP-AIR COMPRESSOR
S/N W1A1-184; W1A400-UP
INLET AND DISCHARGE
ENGINE BRAKE GP
ENGINE BRAKE GP
148-7483 ENGINE BRAKE GP
148-7483 ENGINE BRAKE GP
S/N W1A1-175; W1A400-UP
12 VOLT
FIELD REPLACEMENT ORDER @@@@@194-4273@@@@@, @@@@@221-1188@@@@@
ENGINE BRAKE GP
194-4273 ENGINE BRAKE GP
194-4273 ENGINE BRAKE GP
12 VOLT
FIELD REPLACEMENT FOR @@@@@148-7483@@@@@, @@@@@250-1834@@@@@
ENGINE BRAKE GP
221-1188 ENGINE BRAKE GP
221-1188 ENGINE BRAKE GP
S/N W1A111-UP
12 VOLT
FIELD REPLACEMENT FOR @@@@@148-7483@@@@@
ENGINE BRAKE GP
250-1834 ENGINE BRAKE GP
250-1834 ENGINE BRAKE GP
S/N W1A533-UP
FIELD REPLACEMENT ORDER @@@@@194-4273@@@@@
HOUSING GP-ENGINE BRAKE
189-5949 HOUSING GP-ENGINE BRAKE
189-5949 HOUSING GP-ENGINE BRAKE
S/N W1A533-UP
12 VOLT
PART OF 194-4273, 250-1834 ENGINE BRAKE GP
HOUSING GP-ENGINE BRAKE
221-1189 HOUSING GP-ENGINE BRAKE
221-1189 HOUSING GP-ENGINE BRAKE
S/N W1A1-532
PART OF 148-7483, 221-1188 ENGINE BRAKE GP
CAMSHAFT GP
CAMSHAFT GP
185-9699 CAMSHAFT GP
185-9699 CAMSHAFT GP
GEAR GP-CAMSHAFT
353-0186 GEAR GP-CAMSHAFT
353-0186 GEAR GP-CAMSHAFT
DUAL CAM SENSORS
PART OF 208-9490 GEAR GP-FRONT
CRANKSHAFT GP
CRANKSHAFT AS
187-8989 CRANKSHAFT AS
187-8989 CRANKSHAFT AS
PART OF 160-3913 CRANKSHAFT GP
CRANKSHAFT GP
160-3913 CRANKSHAFT GP
160-3913 CRANKSHAFT GP
243-6718 KIT-CRANKSHAFT BEARING
243-6718 KIT-CRANKSHAFT BEARING
FIELD INSTALLATION
SEAL GP-CRANKSHAFT
319-0785 SEAL GP-CRANKSHAFT
319-0785 SEAL GP-CRANKSHAFT -REAR
S/N W1A620-UP
PART OF 160-6265 HOUSING GP-FLYWHEEL
FOR USE WITH CCW ROTATION
SEAL GP-CRANKSHAFT
319-7401 SEAL GP-CRANKSHAFT
319-7401 SEAL GP-CRANKSHAFT -FRONT
PART OF 160-3913 CRANKSHAFT GP
FOR USE WITH CW ROTATION
CYLINDER BLOCK GP
COVER GP-CYLINDER BLOCK
107-6736 COVER GP-CYLINDER BLOCK
107-6736 COVER GP-CYLINDER BLOCK
S/N W1A582-UP
FOR USE WITH MID MOUNTED TURBO AND/OR RH OIL FILL
COVER GP-CYLINDER BLOCK
109-1223 COVER GP-CYLINDER BLOCK
109-1223 COVER GP-CYLINDER BLOCK
FOR USE WITH LOW OR CENTER MOUNTED TURBOCHARGER
COVER GP-CYLINDER BLOCK
127-9086 COVER GP-CYLINDER BLOCK
127-9086 COVER GP-CYLINDER BLOCK
S/N W1A1-184; W1A400-UP
FOR USE WITH LOW OR CENTER MOUNTED TURBOCHARGER AND RH MOUNTED COOLANT CONDITIONER
CYLINDER BLOCK AS
155-0741 CYLINDER BLOCK AS
155-0741 CYLINDER BLOCK AS
PART OF 155-0740 CYLINDER BLOCK GP
CYLINDER BLOCK AS
234-9709 CYLINDER BLOCK AS
234-9709 CYLINDER BLOCK AS
S/N W1A400-684
PART OF 234-9702 CYLINDER BLOCK GP
CYLINDER BLOCK AS
488-1678 CYLINDER BLOCK AS
488-1678 CYLINDER BLOCK AS
S/N W1A685-UP
PART OF 234-9702 CYLINDER BLOCK GP
CYLINDER BLOCK GP
155-0740 CYLINDER BLOCK GP
155-0740 CYLINDER BLOCK GP
S/N W1A1-399
CYLINDER BLOCK GP
234-9702 CYLINDER BLOCK GP
234-9702 CYLINDER BLOCK GP
S/N W1A400-684
CYLINDER BLOCK GP
234-9702 CYLINDER BLOCK GP
234-9702 CYLINDER BLOCK GP
S/N W1A685-UP
PLUG GP-CYLINDER BLOCK
235-1591 PLUG GP-CYLINDER BLOCK
235-1591 PLUG GP-CYLINDER BLOCK
S/N W1A400-UP
PLUG GP-ENGINE
234-9776 PLUG GP-ENGINE
234-9776 PLUG GP-ENGINE
S/N W1A400-UP
STRAIGHT THREAD O-RING PORTS
CYLINDER HEAD GP
CYLINDER HEAD AS
223-7263 CYLINDER HEAD AS
223-7263 CYLINDER HEAD AS
S/N W1A400-UP
WITH PRE-FINISHED VALVE SEAT INSERTS
PART OF 243-6741 CYLINDER HEAD AS, 223-9250 CYLINDER HEAD GP
CYLINDER HEAD AS
243-0943 CYLINDER HEAD AS
243-0943 CYLINDER HEAD AS
S/N W1A400-518
PART OF 243-6741 CYLINDER HEAD AS
CYLINDER HEAD AS
243-6741 CYLINDER HEAD AS
243-6741 CYLINDER HEAD AS
S/N W1A400-518
WITH MACHINE IN PLACE VALVE SEAT INSERTS
PART OF 223-9250 CYLINDER HEAD GP
CYLINDER HEAD AS
245-4324 CYLINDER HEAD AS
245-4324 CYLINDER HEAD AS
PART OF 183-5296 CYLINDER HEAD GP
CYLINDER HEAD AS
281-1640 CYLINDER HEAD AS
281-1640 CYLINDER HEAD AS
S/N W1A709-UP
PART OF 263-5055 CYLINDER HEAD GP
CYLINDER HEAD GP
159-8655 CYLINDER HEAD GP
159-8655 CYLINDER HEAD GP
CYLINDER HEAD GP
183-5296 CYLINDER HEAD GP
183-5296 CYLINDER HEAD GP
PART OF 159-8655 CYLINDER HEAD GP
CYLINDER HEAD GP
223-9250 CYLINDER HEAD GP
223-9250 CYLINDER HEAD GP
S/N W1A400-518
FOR 2300 RPM APLICATIONS FEILD REPLACEMENT 380-9100 CYLINDER HEAD IS AVALIBLE
PART OF 235-3178 CYLINDER HEAD GP
CYLINDER HEAD GP
223-9250 CYLINDER HEAD GP
223-9250 CYLINDER HEAD GP
S/N W1A519-UP
FOR 2300 RPM APLICATIONS FEILD REPLACEMENT 380-9100 CYLINDER HEAD IS AVALIBLE
PART OF 235-3178 CYLINDER HEAD GP
CYLINDER HEAD GP
235-3178 CYLINDER HEAD GP
235-3178 CYLINDER HEAD GP
S/N W1A400-708
ACERT
CYLINDER HEAD GP
235-3178 CYLINDER HEAD GP
235-3178 CYLINDER HEAD GP
S/N W1A709-UP
ACERT
Type 1
CYLINDER HEAD GP
235-3178 CYLINDER HEAD GP
235-3178 CYLINDER HEAD GP
S/N W1A709-UP
ACERT
Type 2
CYLINDER HEAD GP
263-5055 CYLINDER HEAD GP
263-5055 CYLINDER HEAD GP
S/N W1A709-UP
PART OF 235-3178 CYLINDER HEAD GP
PLUG GP-CYLINDER HEAD
110-1116 PLUG GP-CYLINDER HEAD
110-1116 PLUG GP-CYLINDER HEAD
S/N W1A1-399
CANNOT BE USED WITH SET BACK REGULATOR HOUSING
PLUG GP-CYLINDER HEAD
234-5986 PLUG GP-CYLINDER HEAD
234-5986 PLUG GP-CYLINDER HEAD
S/N W1A400-UP
PLUG GP-ENGINE
234-9776 PLUG GP-ENGINE
234-9776 PLUG GP-ENGINE
S/N W1A400-UP
STRAIGHT THREAD O-RING PORTS
DAMPER GP
DAMPER GP
111-8317 DAMPER GP
111-8317 DAMPER GP
2-GROOVE. VISCOUS
FOR USE WITH ENGINES RATED 435 BHP AND ABOVE AND ENGINES EQUIPPED WITH AUTO TRANSMISSION OR FRONT PTO, AUTOMATIC TRANSMISSIONS OR FRONT PTO
DRIVE GP-PUMP
ADAPTER GP-PUMP DRIVE
133-9907 ADAPTER GP-PUMP DRIVE
133-9907 ADAPTER GP-PUMP DRIVE
PART OF 6I-3638 DRIVE GP-PUMP
DRIVE GP-PUMP
6I-3638 DRIVE GP-PUMP
6I-3638 DRIVE GP-PUMP
SAE 2
FLYWHEEL GP
FLYWHEEL GP
113-7059 FLYWHEEL GP
113-7059 FLYWHEEL GP
S/N W1A1-184; W1A400-UP
FOR USE WITH SAE NO. 1 FLYWHEEL HOUSING, TORQUE CONVERTER WITHOUT CLUTCH
FLYWHEEL GP
154-6189 FLYWHEEL GP
154-6189 FLYWHEEL GP
S/N W1A518-UP
FOR USE WITH SAE NO.1 OR 16 INCH FLYWHEEL HOUSING , SPICER 15.5 INCH (394-MM), 7 SPRING CLUTCH
FLYWHEEL GP
7N-3060 FLYWHEEL GP
7N-3060 FLYWHEEL GP
FOR USE WITH SAE NO. 1 FLYWHEEL HOUSING
GEAR GP
GEAR GP-CAMSHAFT
353-0186 GEAR GP-CAMSHAFT
353-0186 GEAR GP-CAMSHAFT
DUAL CAM SENSORS
PART OF 208-9490 GEAR GP-FRONT
GEAR GP-FRONT
208-9490 GEAR GP-FRONT
208-9490 GEAR GP-FRONT
GEAR GP-FRONT
208-9490 GEAR GP-FRONT
208-9490 GEAR GP-FRONT
S/N W1A400-UP
HOUSING GP-FRONT
159-8616 HOUSING GP-FRONT
159-8616 HOUSING GP-FRONT
S/N W1A475-UP
NO SOUND SUPPRESSION
CANNOT BE USED WITH OIL FILLER, BELT TIGHTENER, BELT TIGHTENER FASTENER AND ALTERNATOR MTG.
HOUSING GP-FRONT
165-5581 HOUSING GP-FRONT
165-5581 HOUSING GP-FRONT
S/N W1A1-474
NO SOUND SUPPRESSION
FOR USE WITH OIL FILLER
HOUSING GP-FLYWHEEL
COVER GP-FLYWHEEL HOUSING
9N-3889 COVER GP-FLYWHEEL HOUSING
9N-3889 COVER GP-FLYWHEEL HOUSING
FOR USE WITH SAE NO. 1 FLYWHEEL HOUSING
HOUSING GP-FLYWHEEL
160-6265 HOUSING GP-FLYWHEEL
160-6265 HOUSING GP-FLYWHEEL
S/N W1A620-UP
FOR USE WITH BRAKESAVER
HOUSING GP-FLYWHEEL
160-6266 HOUSING GP-FLYWHEEL
160-6266 HOUSING GP-FLYWHEEL
S/N W1A1-559
FOR VERTICAL INSTALLATION AND DOUBLE LIP CRANKSHAFT SEAL
HOUSING GP-FLYWHEEL
160-6266 HOUSING GP-FLYWHEEL
160-6266 HOUSING GP-FLYWHEEL
S/N W1A560-UP
FOR VERTICAL INSTALLATION AND DOUBLE LIP CRANKSHAFT SEAL
PLUG GP-FLYWHEEL HOUSING
109-4314 PLUG GP-FLYWHEEL HOUSING
109-4314 PLUG GP-FLYWHEEL HOUSING
DRAIN
CANNOT BE USED WITH BRAKESAVER
HOUSING GP-FRONT
COVER GP-FRONT HOUSING
159-6159 COVER GP-FRONT HOUSING
159-6159 COVER GP-FRONT HOUSING
CAM AND IDLER GEAR ACCESS
FASTENER GP-FRONT HOUSING
108-9382 FASTENER GP-FRONT HOUSING
108-9382 FASTENER GP-FRONT HOUSING
FASTENER GP-FRONT HOUSING
110-6984 FASTENER GP-FRONT HOUSING
110-6984 FASTENER GP-FRONT HOUSING
S/N W1A1-756
FORD, PROVIDES BOLT TO FASTEN FRONT HOUSING TO WATER PUMP HOUSING
CANNOT BE USED WITH ALTERNATOR OR BELT TIGHTENER
FASTENER GP-FRONT HOUSING
4P-6846 FASTENER GP-FRONT HOUSING
4P-6846 FASTENER GP-FRONT HOUSING
GEAR GP-FRONT
208-9490 GEAR GP-FRONT
208-9490 GEAR GP-FRONT
GEAR GP-FRONT
208-9490 GEAR GP-FRONT
208-9490 GEAR GP-FRONT
S/N W1A400-UP
HOUSING GP-FRONT
159-8616 HOUSING GP-FRONT
159-8616 HOUSING GP-FRONT
S/N W1A475-UP
NO SOUND SUPPRESSION
CANNOT BE USED WITH OIL FILLER, BELT TIGHTENER, BELT TIGHTENER FASTENER AND ALTERNATOR MTG.
HOUSING GP-FRONT
165-5581 HOUSING GP-FRONT
165-5581 HOUSING GP-FRONT
S/N W1A1-474
NO SOUND SUPPRESSION
FOR USE WITH OIL FILLER
PLATE AS-FRONT HOUSING
353-9979 PLATE AS-FRONT HOUSING
353-9979 PLATE AS-FRONT HOUSING
PART OF 159-8616, 165-5581 HOUSING GP-FRONT
LIFTING GP-ENGINE
LIFTING GP-ENGINE
111-2088 LIFTING GP-ENGINE
111-2088 LIFTING GP-ENGINE
REAR, LOW PROFILE LIFTING EYE
LIFTING GP-ENGINE
112-2418 LIFTING GP-ENGINE
112-2418 LIFTING GP-ENGINE
FRONT LIFTING EYE
CANNOT BE USED WITH ALTERNATOR MOUNTING
MOUNTING GP-ENGINE
SUPPORT GP-ENGINE
130-0717 SUPPORT GP-ENGINE
130-0717 SUPPORT GP-ENGINE
228.8 MM FROM CENTERLINE OF CRANKSHAFT TO MOUNTING FACE OF SUPPORT
PAN GP-OIL
FASTENER GP-OIL PAN
109-3290 FASTENER GP-OIL PAN
109-3290 FASTENER GP-OIL PAN -ENGINE
S/N W1A510-UP
FOR USE WITH NON-BRAKESAVER ENGINES
FASTENER GP-OIL PAN
176-7008 FASTENER GP-OIL PAN
176-7008 FASTENER GP-OIL PAN -ENGINE
S/N W1A1-184; W1A400-UP
PROVIDES 3 STUDS ON RIGHT AND LEFT SIDE OF ENGINE
FOR USE WITH FRONT OR REAR SUMP
PAN GP-OIL
109-3285 PAN GP-OIL
109-3285 PAN GP-OIL -FAN DRIVE-ENGINE
PROVIDES SET BACK OIL PAN AND INTERNAL OIL LINES
PAN GP-OIL
160-5867 PAN GP-OIL
160-5867 PAN GP-OIL -ENGINE
S/N W1A1-184; W1A400-UP
DEEP FRONT SUMP-INTERNAL OIL LINES, PROVIDES PAN ISOLATION MOUNTING SYSTEM AND UNDERFRAME STIFFENER PLATE
PISTON & ROD GP
PISTON & ROD GP
134-3071 PISTON & ROD GP
134-3071 PISTON & ROD GP
COMPRESSION RATIO 16:1, JET AS-PISTON EFFECTIVE 7RC483-UP, 3LW175-UP. FOR ALL OTHER SERIAL NUMBERS, REFER TO CYLINDER BLOCK GP FOR CORRECT JET AS-PISTON.
PULLEY GP
PULLEY GP-CRANKSHAFT
111-8322 PULLEY GP-CRANKSHAFT
111-8322 PULLEY GP-CRANKSHAFT
S/N W1A1-184; W1A400-UP
10.87IN (276MM) DIAMETER-14 GROOVE POLY VEE
PULLEY GP-CRANKSHAFT
145-9326 PULLEY GP-CRANKSHAFT
145-9326 PULLEY GP-CRANKSHAFT
9 INCH (228.6MM) DIAMETER
FOR USE WITH @@@@@111-8317@@@@@
VALVE MECHANISM GP
BASE GP-VALVE COVER & INJ HARN
122-1248 BASE GP-VALVE COVER & INJ HARN
122-1248 BASE GP-VALVE COVER & INJ HARN
S/N W1A1-729
BASE GP-VALVE COVER & INJ HARN
122-1248 BASE GP-VALVE COVER & INJ HARN
122-1248 BASE GP-VALVE COVER & INJ HARN
S/N W1A730-UP
COVER GP-VALVE MECHANISM
150-3141 COVER GP-VALVE MECHANISM
150-3141 COVER GP-VALVE MECHANISM
PART OF 159-9339 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
159-9339 COVER GP-VALVE MECHANISM
159-9339 COVER GP-VALVE MECHANISM
NO OIL FILL, REAR MOUNTED BREATHER
FOR USE WITH REAR FUMES DISPOSAL
COVER GP-VALVE MECHANISM
159-9343 COVER GP-VALVE MECHANISM
159-9343 COVER GP-VALVE MECHANISM
PART OF 159-9339 COVER GP-VALVE MECHANISM
FASTENER GP-VALVE MECHANISM
109-1657 FASTENER GP-VALVE MECHANISM
109-1657 FASTENER GP-VALVE MECHANISM
S/N W1A1-184; W1A400-UP
MECHANISM GP-FUEL PUMP & VALVE
148-7482 MECHANISM GP-FUEL PUMP & VALVE
148-7482 MECHANISM GP-FUEL PUMP & VALVE
S/N W1A1-598
MECHANISM GP-FUEL PUMP & VALVE
148-7482 MECHANISM GP-FUEL PUMP & VALVE
148-7482 MECHANISM GP-FUEL PUMP & VALVE
S/N W1A599-UP
Type 1
MECHANISM GP-FUEL PUMP & VALVE
148-7482 MECHANISM GP-FUEL PUMP & VALVE
148-7482 MECHANISM GP-FUEL PUMP & VALVE
S/N W1A599-UP
Type 2
MECHANISM GP-FUEL PUMP & VALVE
148-7482 MECHANISM GP-FUEL PUMP & VALVE
148-7482 MECHANISM GP-FUEL PUMP & VALVE
S/N W1A599-UP
Type 3
MECHANISM GP-FUEL PUMP & VALVE
190-0009 MECHANISM GP-FUEL PUMP & VALVE
190-0009 MECHANISM GP-FUEL PUMP & VALVE
S/N W1A518-555
MECHANISM GP-FUEL PUMP & VALVE
190-0009 MECHANISM GP-FUEL PUMP & VALVE
190-0009 MECHANISM GP-FUEL PUMP & VALVE
S/N W1A556-1179
MECHANISM GP-FUEL PUMP & VALVE
190-0009 MECHANISM GP-FUEL PUMP & VALVE
190-0009 MECHANISM GP-FUEL PUMP & VALVE
S/N W1A556-UP
MECHANISM GP-FUEL PUMP & VALVE
190-0009 MECHANISM GP-FUEL PUMP & VALVE
190-0009 MECHANISM GP-FUEL PUMP & VALVE
S/N W1A599-UP
ROCKER ARM GP
198-9898 ROCKER ARM GP
198-9898 ROCKER ARM GP
PART OF 148-7482 MECHANISM GP-FUEL PUMP & VALVE
ROCKER ARM GP
210-2521 ROCKER ARM GP
210-2521 ROCKER ARM GP
S/N W1A518-UP
PART OF 190-0009 MECHANISM GP-FUEL PUMP & VALVE
ROCKER ARM GP
278-1929 ROCKER ARM GP
278-1929 ROCKER ARM GP
S/N W1A518-UP
PART OF 190-0009 MECHANISM GP-FUEL PUMP & VALVE
ROCKER ARM GP
278-1931 ROCKER ARM GP
278-1931 ROCKER ARM GP
S/N W1A599-UP
PART OF 148-7482 MECHANISM GP-FUEL PUMP & VALVE
ROCKER ARM GP
320-2796 ROCKER ARM GP
320-2796 ROCKER ARM GP
PART OF 328-4236, 328-4237 ROCKER ARM GP
ROCKER ARM GP
328-4236 ROCKER ARM GP
328-4236 ROCKER ARM GP -NON-BRAKE
S/N W1A518-UP
PART OF 190-0009 MECHANISM GP-FUEL PUMP & VALVE
ROCKER ARM GP
328-4237 ROCKER ARM GP
328-4237 ROCKER ARM GP
PART OF 148-7482 MECHANISM GP-FUEL PUMP & VALVE
ROCKER ARM GP
328-4238 ROCKER ARM GP
328-4238 ROCKER ARM GP
PART OF 328-4236, 328-4237 ROCKER ARM GP
ROCKER ARM GP
328-4239 ROCKER ARM GP
328-4239 ROCKER ARM GP
PART OF 328-4237 ROCKER ARM GP
ROCKER ARM GP
437-3862 ROCKER ARM GP
437-3862 ROCKER ARM GP
S/N W1A518-UP
PART OF 437-3865, 437-3866 ROCKER ARM GP
ROCKER ARM GP
437-3864 ROCKER ARM GP
437-3864 ROCKER ARM GP
S/N W1A518-UP
PART OF 437-3865, 437-3866 ROCKER ARM GP
437-3865 ROCKER ARM GP
437-3865 ROCKER ARM GP
S/N W1A518-UP
NON BRAKE
PART OF 190-0009 MECHANISM GP-FUEL PUMP & VALVE
Type 1
ROCKER ARM GP
437-3865 ROCKER ARM GP
437-3865 ROCKER ARM GP
S/N W1A518-UP
NON BRAKE
PART OF 190-0009 MECHANISM GP-FUEL PUMP & VALVE
Type 2
ROCKER ARM GP
437-3866 ROCKER ARM GP
437-3866 ROCKER ARM GP
S/N W1A599-UP
PART OF 148-7482 MECHANISM GP-FUEL PUMP & VALVE
Type 1
ROCKER ARM GP
437-3866 ROCKER ARM GP
437-3866 ROCKER ARM GP
S/N W1A599-UP
PART OF 148-7482 MECHANISM GP-FUEL PUMP & VALVE
Type 2
ROCKER ARM GP
437-3875 ROCKER ARM GP
437-3875 ROCKER ARM GP
S/N W1A599-UP
PART OF 437-3866 ROCKER ARM GP
ROCKER ARM GP
489-8222 ROCKER ARM GP
489-8222 ROCKER ARM GP
S/N W1A518-UP
PART OF 437-3865, 437-3866 ROCKER ARM GP
HOUSING GP-REAR
438-0907 KIT-REAR COVER GASKET
438-0907 KIT-REAR COVER GASKET -REAR STRUCTURE
CONTAINS THE GASKETS, SEALS AND BENDABLE LOCKS TO REINSTALL THE REAR COVER. KIT DOES NOT INCLUDE OIL PAN GASKET
FIELD INSTALLATION
COVER GP-ENGINE
436-3458 KIT-FRONT COVER GASKET
436-3458 KIT-FRONT COVER GASKET
CONTAINS THE GASKETS, SEALS, & BENDABLE LOCKS TO REINSTALL THE FRONT COVER. THIS KIT DOES NOT INCLUDE THE OIL PAN GASKET
FOR USE WITH @@@@@275-3541@@@@@
FIELD INSTALLATION
436-6597 KIT-FRONT COVER GASKET
436-6597 KIT-FRONT COVER GASKET
KIT CONTAINS THE GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE FRONT COVER. KIT DOES NOT INCLUDE THE OIL PAN GASKET
FIELD INSTALLATION

Information:

(For parts list, see above)

General Service Information
Introduction
BENDIX AIR COMPRESSOR
Description
BENDIX AIR COMPRESSOR
Operation
BENDIX AIR COMPRESSOR
Intake And Compression Of Air (Loaded)
BENDIX AIR COMPRESSOR
Air Induction
BENDIX AIR COMPRESSOR
Preventative Maintenance
BENDIX AIR COMPRESSOR
Removal And Disassembly
BENDIX AIR COMPRESSOR
Cleaning Of Parts
BENDIX AIR COMPRESSOR
Inspection Of Parts
BENDIX AIR COMPRESSOR
Repairs
BENDIX AIR COMPRESSOR
Assembly
BENDIX AIR COMPRESSOR
Tu-Flo 550 Specifications
BENDIX AIR COMPRESSOR
Torque Specifications
BENDIX AIR COMPRESSOR
Dimensional Data
BENDIX AIR COMPRESSOR
Maintenance Kits And Available Service Parts
BENDIX AIR COMPRESSOR
Compressor Troubleshooting
BENDIX AIR COMPRESSOR
Introduction
BENDIX AIR COMPRESSOR
Description
BENDIX AIR COMPRESSOR
Operation
BENDIX AIR COMPRESSOR
Air Induction
BENDIX AIR COMPRESSOR
Preventative Maintenance
BENDIX AIR COMPRESSOR
Removal And Disassembly
BENDIX AIR COMPRESSOR
Cleaning Of Parts
BENDIX AIR COMPRESSOR
Inspection Of Parts
BENDIX AIR COMPRESSOR
Repairs
BENDIX AIR COMPRESSOR
Assembly
BENDIX AIR COMPRESSOR
Tu-Flo 750 Specifications
BENDIX AIR COMPRESSOR
Torque Specifications
BENDIX AIR COMPRESSOR
Dimensional Data
BENDIX AIR COMPRESSOR
Maintenance Kits And Available Service Parts
BENDIX AIR COMPRESSOR
Compressor Troubleshooting
BENDIX AIR COMPRESSOR
Truck Engine News
Repair Guidelines for Air Compressors {1803}
2003/10/01
A New Diagnostic Kit for the Evaluation of Air Compressor Operation is Introduced {1803}
2004/11/01
Disassembly and Assembly
Air Compressor - Remove and Install
C-15, C-16 and C-18 Truck Engines
Air Compressor Drive Gear - Remove
C-15, C-16 and C-18 Truck Engines
Air Compressor Drive Gear - Install
C-15, C-16 and C-18 Truck Engines
Air Compressor Drive Gear - Install - Two Cylinder
C-15, C-16 and C-18 Truck Engines
Specifications
Belt Tension Chart
C-15, C-16, and C-18 Truck Engines
Disassembly and Assembly
Belt Tensioner - Remove and Install
C-15, C-16 and C-18 Truck Engines
Truck Engine News
New Slave Piston Lash Settings are Available for Heavy-Duty Diesel Engines {1119, 1129}
2003/04/01
Compression Brakes Should be Inspected Carefully During Repairs to the Cylinder Head and Valve Mechanism {1119}
2003/05/01
New Slave Piston Lash Settings are Available for Heavy-Duty Diesel Engines {1129}
2015/09/18
Specifications
Compression Brake - If Equipped
C-15, C-16, and C-18 Truck Engines
Systems Operation
Compression Brake
C-15, C-16, and C-18 Engines
BrakeSaver
C-15, C-16, and C-18 Engines
Testing and Adjusting
Control Valve (Compression Brake) - Test
C-15, C-16, and C-18 Engines
Solenoid Valve (Compression Brake) - Test
C-15, C-16, and C-18 Engines
Slave Piston Lash - Adjust
C-15, C-16, and C-18 Engines
Troubleshooting
Engine Retarder (Compression Brake) Will Not Turn ON
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines
Retarder (Compression Brake) Solenoid Circuit - Test
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines
Auxiliary Brake Circuit - Test
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines
0121-06 Low/High Retarder current high (14)
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines
0121-05 Low/High Retarder current low (14)
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines
0122-06 Med/High Retarder current high (14)
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines
0122-05 Med/High Retarder current low (14)
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines
Disassembly and Assembly
Compression Brake - Remove - If Equipped
C-15, C-16 and C-18 Truck Engines
Compression Brake - Install - If Equipped
C-15, C-16 and C-18 Truck Engines
Compression Brake - Disassemble - If Equipped
C-15, C-16 and C-18 Truck Engines
Compression Brake - Assemble - If Equipped
C-15, C-16 and C-18 Truck Engines
BrakeSaver - Disassemble
C-15, C-16 and C-18 Truck Engines
BrakeSaver Engine Oil Pump - Disassemble
C-15, C-16 and C-18 Truck Engines
BrakeSaver Engine Oil Pump - Assemble
C-15, C-16 and C-18 Truck Engines
BrakeSaver - Assemble
C-15, C-16 and C-18 Truck Engines
BrakeSaver Engine Oil Pan - Remove and Install
C-15, C-16 and C-18 Truck Engines
BrakeSaver Control Valve - Disassemble
C-15, C-16 and C-18 Truck Engines
BrakeSaver Control Valve - Assemble
C-15, C-16 and C-18 Truck Engines
BrakeSaver - Remove
C-15, C-16 and C-18 Truck Engines
BrakeSaver - Install
C-15, C-16 and C-18 Truck Engines
BrakeSaver Engine Oil Pump - Remove
C-15, C-16 and C-18 Truck Engines
BrakeSaver Engine Oil Pump - Install
C-15, C-16 and C-18 Truck Engines
BrakeSaver Control Valve - Remove
C-15, C-16 and C-18 Truck Engines
BrakeSaver Control Valve - Install
C-15, C-16 and C-18 Truck Engines
Truck Engine News
Procedure to Torque Camshaft Gears which Include Camshaft Gears in Remanufactured Engines with Serial Number Prefix <B>S/N:</B>4AS<BR> {1206, 1210}
2007/02/01
Engine News
A New Improved Cam Gear Is Now Available for Certain Engines {1212}
2013/06/18
Specifications
Camshaft
C-15, C-16, and C-18 Truck Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Camshafts {1210, 1210}
Reuse and Salvage for Camshafts {1210, 1210}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Testing and Adjusting
Excessive Bearing Wear - Inspect
C-15, C-16, and C-18 Engines
Disassembly and Assembly
Camshaft - Remove
C-15, C-16 and C-18 Truck Engines
Camshaft - Install
C-15, C-16 and C-18 Truck Engines
Camshaft Bearings - Remove
C-15, C-16 and C-18 Truck Engines
Camshaft Bearings - Install
C-15, C-16 and C-18 Truck Engines
Camshaft Gear - Remove and Install
C-15, C-16 and C-18 Truck Engines
Truck Engine News
New Front Crankshaft Seals and New Rear Crankshaft Seals are Now in Production {1160, 1161}
2003/05/01
A New Type of Main Bearing Is Now Used {1202, 1203}
2008/07/01
A New Type of Main Bearing is Available {1202, 1203}
2008/10/01
Special Instruction
Inspection and/or Repair Procedure to Replace Broken Crankshafts in C-15, C-16, C15, 3406C, 3406E, and 3456 Engines{1202}
Inspection and/or Repair Procedure to Replace Broken Crankshafts in C-15, C-16, C15, 3406C, 3406E, and 3456 Engines{1202}
Specifications
Connecting Rod Bearing Journal
C-15, C-16, and C-18 Truck Engines
Main Bearing Journal
C-15, C-16, and C-18 Truck Engines
Crankshaft
C-15, C-16, and C-18 Truck Engines
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Testing and Adjusting
Excessive Bearing Wear - Inspect
C-15, C-16, and C-18 Engines
Main Bearings - Inspect
C-15, C-16, and C-18 Engines
Disassembly and Assembly
Bearing Clearance - Check
C-15, C-16 and C-18 Truck Engines
Crankshaft Front Seal - Install
C-15, C-16 and C-18 Truck Engines
Crankshaft Main Bearings - Remove
C-15, C-16 and C-18 Truck Engines
Crankshaft Front Seal - Remove
C-15, C-16 and C-18 Truck Engines
Crankshaft - Remove
C-15, C-16 and C-18 Truck Engines
Crankshaft - Install
C-15, C-16 and C-18 Truck Engines
Crankshaft Rear Seal - Remove
C-15, C-16 and C-18 Truck Engines
Crankshaft Rear Seal - Install
C-15, C-16 and C-18 Truck Engines
Crankshaft Main Bearings - Install
C-15, C-16 and C-18 Truck Engines
Service Magazine
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Engine News
Cylinder Head And Spacer Plate Gasket Failures On Certain Engines {1100, 1201}
2015/05/15
Special Instruction
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Technical Information Bulletin
Cylinder Liners are Cracking after Engine Rebuilds on Certain 3456 and C16 Engines{1201, 1216}
Cylinder Liners are Cracking after Engine Rebuilds on Certain 3456 and C16 Engines{1201, 1216}
Specifications
Main Bearing Journal
C-15, C-16, and C-18 Truck Engines
Cylinder Liner
C-15, C-16, and C-18 Truck Engines
Cylinder Block
C-15, C-16, and C-18 Truck Engines
Cylinder Liner
C-15, C-16, and C-18 Truck Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Testing and Adjusting
Cylinder Block - Inspect
C-15, C-16, and C-18 Engines
Excessive Bearing Wear - Inspect
C-15, C-16, and C-18 Engines
Main Bearings - Inspect
C-15, C-16, and C-18 Engines
Cylinder Liner Projection - Inspect
C-15, C-16, and C-18 Engines
Disassembly and Assembly
Bearing Clearance - Check
C-15, C-16 and C-18 Truck Engines
Crankshaft Main Bearings - Remove
C-15, C-16 and C-18 Truck Engines
Cylinder Liner - Remove
C-15, C-16 and C-18 Truck Engines
Piston Cooling Jets - Remove and Install
C-15, C-16 and C-18 Truck Engines
Camshaft Bearings - Remove
C-15, C-16 and C-18 Truck Engines
Camshaft Bearings - Install
C-15, C-16 and C-18 Truck Engines
Cylinder Liner - Install
C-15, C-16 and C-18 Truck Engines
Crankshaft Main Bearings - Install
C-15, C-16 and C-18 Truck Engines
Truck Engine News
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/01
Cylinder Head And Spacer Plate Gasket Failures On Certain Truck Engines {1100}
Cylinder Head And Spacer Plate Gasket Failures On Certain Truck Engines {1100}
Engine News
A New Outer Valve Spring is Now Used {1100, 1108}
2008/12/08
Cylinder Head And Spacer Plate Gasket Failures On Certain Engines {1100, 1201}
2015/05/15
Special Instruction
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Oversized Injector Sleeves for Remanufactured Cylinder Heads On Medium Sized Engines{1100, 1101, 1125}
Oversized Injector Sleeves for Remanufactured Cylinder Heads On Medium Sized Engines{1100, 1101, 1125}
Rocker Valley Inserts Are Now Used in Remanufactured Cylinder Heads{1100, 1102}
Rocker Valley Inserts Are Now Used in Remanufactured Cylinder Heads{1100, 1102}
Specifications
Cylinder Head
C-15, C-16, and C-18 Truck Engines
Cylinder Head Valves
C-15, C-16, and C-18 Truck Engines
Cylinder Head Valves
C-15, C-16, and C-18 Truck Engines
Tool Operating Manual
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Testing and Adjusting
Engine Valve Lash - Inspect/Adjust
C-15, C-16, and C-18 Engines
Disassembly and Assembly
Electronic Unit Injector Sleeve - Install
C-15, C-16 and C-18 Truck Engines
Electronic Unit Injector Sleeve - Remove
C-15, C-16 and C-18 Truck Engines
Camshaft Bearings - Remove
C-15, C-16 and C-18 Truck Engines
Camshaft Bearings - Install
C-15, C-16 and C-18 Truck Engines
Cylinder Head - Remove
C-15, C-16 and C-18 Truck Engines
Cylinder Head - Install
C-15, C-16 and C-18 Truck Engines
Inlet and Exhaust Valve Guides - Remove and Install
C-15, C-16 and C-18 Truck Engines
Inlet and Exhaust Valves - Remove and Install
C-15, C-16 and C-18 Truck Engines
Inlet and Exhaust Valve Seat Inserts - Remove and Install
C-15, C-16 and C-18 Truck Engines
Inlet and Exhaust Valve Seals - Remove and Install
C-15, C-16 and C-18 Truck Engines
Inlet and Exhaust Valve Springs - Remove and Install
C-15, C-16 and C-18 Truck Engines
Rocker Arm and Shaft - Install
C-15, C-16 and C-18 Truck Engines
Rocker Arm and Shaft - Remove
C-15, C-16 and C-18 Truck Engines
Specifications
Vibration Damper
C-15, C-16, and C-18 Truck Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Testing and Adjusting
Vibration Damper - Check
C-15, C-16, and C-18 Engines
Disassembly and Assembly
Vibration Damper and Pulley - Remove and Install
C-15, C-16 and C-18 Truck Engines
Accessory Drive - Remove
C-15, C-16 and C-18 Truck Engines
Accessory Drive - Install
C-15, C-16 and C-18 Truck Engines
Accessory Drive - Disassemble
C-15, C-16 and C-18 Truck Engines
Accessory Drive - Assemble
C-15, C-16 and C-18 Truck Engines
Fan Drive - Disassemble
C-15, C-16 and C-18 Truck Engines
Fan Drive - Assemble
C-15, C-16 and C-18 Truck Engines
Fan Drive - Remove
C-15, C-16 and C-18 Truck Engines
Special Instruction
Oil and Your Engine {1000}
Oil and Your Engine {1000}
Service Magazine
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Reuse And Salvage Guidelines
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Truck Engine News
Procedure to Use the Correct Mounting Bolts with the 10R-2356 Flywheel As {1156}
2007/12/01
Special Instruction
Procedure to Use the Correct Mounting Bolts with the 10R-2356 Flywheel As {1156}
Procedure to Use the Correct Mounting Bolts with the 10R-2356 Flywheel As {1156}
Specifications
Flywheel Housing
C-15, C-16, and C-18 Truck Engines
Flywheel
C-15, C-16, and C-18 Truck Engines
Flywheel
C-15, C-16, and C-18 Truck Engines
Flywheel
C-15, C-16, and C-18 Truck Engines
Flywheel Housing
C-15, C-16, and C-18 Truck Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Flywheel Assemblies {1156}
Reuse and Salvage for Flywheel Assemblies {1156}
Testing and Adjusting
Flywheel - Inspect
C-15, C-16, and C-18 Engines
Disassembly and Assembly
Flywheel - Remove
C-15, C-16 and C-18 Truck Engines
Flywheel - Install
C-15, C-16 and C-18 Truck Engines
Truck Engine News
Procedure to Torque Camshaft Gears which Include Camshaft Gears in Remanufactured Engines with Serial Number Prefix <B>S/N:</B>4AS<BR> {1206, 1210}
2007/02/01
Engine News
A New Improved Cam Gear Is Now Available for Certain Engines {1212}
2013/06/18
An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206}
2012/12/21
Special Instruction
Troubleshooting Engine Vibration{1000, 1151, 1162, 1206}
Troubleshooting Engine Vibration{1000, 1151, 1162, 1206}
Specifications
Gear Group (Front)
C-15, C-16, and C-18 Truck Engines
Gear Group (Front)
C-15, C-16, and C-18 Truck Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Testing and Adjusting
Gear Group (Front) - Time
C-15, C-16, and C-18 Engines
Disassembly and Assembly
Gear Group (Front) - Remove
C-15, C-16 and C-18 Truck Engines
Gear Group (Front) - Install
C-15, C-16 and C-18 Truck Engines
Specifications
Flywheel Housing
C-15, C-16, and C-18 Truck Engines
Flywheel Housing
C-15, C-16, and C-18 Truck Engines
Testing and Adjusting
Flywheel Housing - Inspect
C-15, C-16, and C-18 Engines
Disassembly and Assembly
Flywheel Housing - Remove and Install
C-15, C-16 and C-18 Truck Engines
Special Instruction
Troubleshooting Engine Vibration{1000, 1151, 1162, 1206}
Troubleshooting Engine Vibration{1000, 1151, 1162, 1206}
Specifications
Housing (Front)
C-15, C-16, and C-18 Truck Engines
Front Housing and Covers
C-15, C-16, and C-18 Truck Engines
Reuse And Salvage Guidelines
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Disassembly and Assembly
Front Cover - Remove
C-15, C-16 and C-18 Truck Engines
Front Cover - Install
C-15, C-16 and C-18 Truck Engines
Housing (Front) - Remove
C-15, C-16 and C-18 Truck Engines
Housing (Front) - Install
C-15, C-16 and C-18 Truck Engines
Specifications
Engine Support (Front)
C-15, C-16, and C-18 Truck Engines
Disassembly and Assembly
Engine Support (Front) - Remove and Install
C-15, C-16 and C-18 Truck Engines
Specifications
Engine Oil Pan
C-15, C-16, and C-18 Truck Engines
Disassembly and Assembly
Engine Oil Pan - Remove and Install
C-15, C-16 and C-18 Truck Engines
Truck Engine News
Replacement of the Piston Cooling Jet {1331}
2003/07/01
New Guidelines for Inspecting Pistons {1214}
2006/01/01
Remanufactured Cylinder Pack Updates and Orientation Requirements for Certain C-16 and 3456 Engines {1214, 1239, 1331}
2011/11/02
Special Instruction
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Technical Information Bulletin
C-16 and 3456Cylinder Packs, Short Blocks, and Long Blocks May Have Oversize Piston Skirts{1225}
C-16 and 3456Cylinder Packs, Short Blocks, and Long Blocks May Have Oversize Piston Skirts{1225}
Specifications
Connecting Rod
C-15, C-16, and C-18 Truck Engines
Connecting Rod Bearing Journal
C-15, C-16, and C-18 Truck Engines
Piston and Rings
C-15, C-16, and C-18 Truck Engines
Connecting Rod
C-15, C-16, and C-18 Truck Engines
Tool Operating Manual
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Reuse And Salvage Guidelines
Reuse and Salvage for Connecting Rods {1218}
Reuse and Salvage for Connecting Rods {1218}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Testing and Adjusting
Engine Crankcase Pressure (Blowby) - Test
C-15, C-16, and C-18 Engines
Excessive Bearing Wear - Inspect
C-15, C-16, and C-18 Engines
Connecting Rod Bearings - Inspect
C-15, C-16, and C-18 Engines
Cylinder Liner Projection - Inspect
C-15, C-16, and C-18 Engines
Piston Ring Groove - Inspect
C-15, C-16, and C-18 Engines
Compression - Test
C-15, C-16, and C-18 Engines
Disassembly and Assembly
Bearing Clearance - Check
C-15, C-16 and C-18 Truck Engines
Pistons and Connecting Rods - Assemble
C-15, C-16 and C-18 Truck Engines
Pistons and Connecting Rods - Disassemble
C-15, C-16 and C-18 Truck Engines
Piston Cooling Jets - Remove and Install
C-15, C-16 and C-18 Truck Engines
Pistons and Connecting Rods - Remove
C-15, C-16 and C-18 Truck Engines
Connecting Rod Bearings - Remove
C-15, C-16 and C-18 Truck Engines
Connecting Rod Bearings - Install
C-15, C-16 and C-18 Truck Engines
Pistons and Connecting Rods - Install
C-15, C-16 and C-18 Truck Engines
Specifications
General Information
On-Highway Engines Electronic PTO Installation and Application Guide
Systems Operation
General Information
On-Highway Engines Electronic PTO Installation and Application Guide
General Information
C-10, C-12, 3406E, C-15, C-16 and C-18 Engines - Electronic PTO Installation and Application
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Disassembly and Assembly
Vibration Damper and Pulley - Remove and Install
C-15, C-16 and C-18 Truck Engines
Engine News
Different Housings are Used on 3400 Remanufactured Engines {1304}
Different Housings are Used on 3400 Remanufactured Engines {1304}
Special Instruction
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
NEHS0566 <NOBR> 4C-9832</NOBR> Large Engine Roll-Over Stand {0599, 0701}
NEHS0566 4C-9832 Large Engine Roll-Over Stand {0599, 0701}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Magazine
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Specifications
Belt Tension Chart
C-15, C-16, and C-18 Truck Engines
Truck Engine News
A New Valve Cover and New Valve Cover Fasteners are Available {1107}
2004/04/01
Valve Bridges are Included with Cylinder Heads {1102, 1123}
2010/05/31
A New Screw Is Available for the Rocker Arm Assemblies of Some Truck Engines {1123}
2010/03/09
A New Valve Bridge Is Available for Certain Truck Engines {1102, 1123}
2011/01/10
Updated Torque Requirements for Reman Rocker Arm Adjusting Screw Lock Nuts on Certain C15, C16, and C18 Truck Engines {1123}
2015/08/07
Engine News
A New Rocker Arm Assembly is Available {1123}
2008/08/25
A New Rocker Arm Assembly Is Available {1123}
2011/09/12
A New Rocker Arm Assembly Is Available for C15 Engines {1123}
2010/03/29
A New Valve Bridge Is Available for Certain Commercial Engines {1121}
2011/01/06
Valve Cover Isolation Seals Are Now Used on Certain Engines {1107, 7555}
2011/11/08
Improved Wiring Harnesses Are Now Used on Certain Engines {1120, 1408, 1900}
Improved Wiring Harnesses Are Now Used on Certain Engines {1120, 1408, 1900}
Cat<SUP>&reg;</SUP> Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Engines {1123}
Cat® Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Engines {1123}
Special Instruction
Valve Bridges are Included with Cylinder Heads{1102, 1123}
Valve Bridges are Included with Cylinder Heads{1102, 1123}
Rocker Valley Inserts Are Now Used in Remanufactured Cylinder Heads{1100, 1102}
Rocker Valley Inserts Are Now Used in Remanufactured Cylinder Heads{1100, 1102}
Specifications
Electronic Unit Injector Rocker Arm
C-15, C-16, and C-18 Truck Engines
Valve Mechanism
C-15, C-16, and C-18 Truck Engines
Valve Mechanism Cover
C-15, C-16, and C-18 Truck Engines
Electronic Unit Injector Rocker Arm
C-15, C-16, and C-18 Truck Engines
Valve Mechanism
C-15, C-16, and C-18 Truck Engines
Reuse And Salvage Guidelines
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Testing and Adjusting
Engine Valve Lash - Inspect/Adjust
C-15, C-16, and C-18 Engines
Finding Top Center Position for No. 1 Piston
C-15, C-16, and C-18 Engines
Disassembly and Assembly
Valve Mechanism Cover - Remove and Install
C-15, C-16 and C-18 Truck Engines
Valve Mechanism Cover Base - Remove and Install
C-15, C-16 and C-18 Truck Engines
Compression Brake - Remove - If Equipped
C-15, C-16 and C-18 Truck Engines
Compression Brake - Install - If Equipped
C-15, C-16 and C-18 Truck Engines
Compression Brake - Disassemble - If Equipped
C-15, C-16 and C-18 Truck Engines
Compression Brake - Assemble - If Equipped
C-15, C-16 and C-18 Truck Engines
Rocker Arm - Disassemble
C-15, C-16 and C-18 Truck Engines
Rocker Arm - Assemble
C-15, C-16 and C-18 Truck Engines
Rocker Arm and Shaft - Install
C-15, C-16 and C-18 Truck Engines
Rocker Arm and Shaft - Remove
C-15, C-16 and C-18 Truck Engines
Service Magazine
Cat<SUP>&reg;</SUP> Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Machine Engines {1123}
Cat® Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Machine Engines {1123}
Reuse And Salvage Guidelines
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.