C-12 Truck Engine MBL00001-UP FUEL SYSTEM Caterpillar SIS




TRUCK ENGINE C-12 TRUCK ENGINE MBL
 C-12 Truck Engine MBL00001-UP SEBP3682 C-12 MBL   (2001)

Parts group C-12:

  For full view, you need register
FUEL SYSTEM
FILTER GP-FUEL
BOWL AS-WATER COLLECTION
155-2629 BOWL AS-WATER COLLECTION
155-2629 BOWL AS-WATER COLLECTION
12 VOLT FUEL HEATER BOWL
FOR USE WITH @@@@@133-5671@@@@@
AN ATTACHMENT
COVER GP-FUEL FILTER BASE
116-5410 COVER GP-FUEL FILTER BASE
116-5410 COVER GP-FUEL FILTER BASE
PROVIDES COVER AND SEAL WHEN NO PRIMING PUMP IS REQUIRED
FOR USE WITH METRIC FUEL FILTER BASE, FUEL FILTER GPS
CANNOT BE USED WITH FUEL PRIMING PUMPS
ALSO AN ATTACHMENT
117-2790 COVER GP-FUEL FILTER BASE
117-2790 COVER GP-FUEL FILTER BASE
FOR USE WITH REMOTE MOUNTED SECONDARY FILTER
ALSO AN ATTACHMENT
COVER GP-FUEL FILTER BASE
118-4490 COVER GP-FUEL FILTER BASE
118-4490 COVER GP-FUEL FILTER BASE
PART OF 117-2790 COVER GP-FUEL FILTER BASE
ALSO AN ATTACHMENT
FILTER GP-FUEL
117-2779 FILTER GP-FUEL
117-2779 FILTER GP-FUEL
2 MICRON
CANNOT BE USED WITH @@@@@157-0068@@@@@
ALSO AN ATTACHMENT
FILTER GP-FUEL
8H-7204 FILTER GP-FUEL
8H-7204 FILTER GP-FUEL
PRIMARY
AN ATTACHMENT
FILTER GP-PRIMARY FUEL
227-2431 FILTER GP-PRIMARY FUEL
227-2431 FILTER GP-PRIMARY FUEL
PROVIDES PRIMARY FUEL FILTER
AN ATTACHMENT
FILTER GP-SECONDARY FUEL
116-5413 FILTER GP-SECONDARY FUEL
116-5413 FILTER GP-SECONDARY FUEL
ADVANCED EFFICIENCY
FILTER GP-WATER SEP & FUEL
133-5671 FILTER GP-WATER SEP & FUEL
133-5671 FILTER GP-WATER SEP & FUEL
AN ATTACHMENT
FILTER GP-WATER SEP & FUEL
459-3810 FILTER GP-WATER SEP & FUEL
459-3810 FILTER GP-WATER SEP & FUEL
FIELD REPLACEMENT FOR @@@@@8N-0940@@@@@
FIELD INSTALLATION
VALVE GP-CHECK
156-5783 VALVE GP-CHECK
156-5783 VALVE GP-CHECK -FUEL
PART OF 216-9293 LINES GP-FUEL, 222-1472, 222-1473, 222-1474, 222-1476, 222-1477, 222-1478, 222-1479, 222-1480, 227-6712 LINES GP-FUEL INJECTION
ALSO AN ATTACHMENT
VALVE GP-CHECK
233-6742 VALVE GP-CHECK
233-6742 VALVE GP-CHECK -FUEL
PART OF 222-1472, 222-1473, 222-1474, 222-1476, 222-1477, 222-1478, 222-1479, 227-6712 LINES GP-FUEL INJECTION
Type 1
ALSO AN ATTACHMENT
VALVE GP-CHECK
233-6742 VALVE GP-CHECK
233-6742 VALVE GP-CHECK -FUEL
PART OF 222-1472, 222-1473, 222-1474, 222-1479 LINES GP-FUEL INJECTION
Type 2
ALSO AN ATTACHMENT
VALVE GP-CHECK
238-0296 VALVE GP-CHECK
238-0296 VALVE GP-CHECK -FUEL
S/N MBL2758-UP
PART OF 222-1480 LINES GP-FUEL INJECTION, 233-6742 VALVE GP-CHECK
ALSO AN ATTACHMENT
VALVE GP-CHECK
281-2725 VALVE GP-CHECK
281-2725 VALVE GP-CHECK -FUEL
PART OF 233-6742 VALVE GP-CHECK
ALSO AN ATTACHMENT
LINES GP-FUEL
FITTING GP-FUEL LINES
116-5419 FITTING GP-FUEL LINES
116-5419 FITTING GP-FUEL LINES
3/4-16X45 DEGREE FLARE- #8 STRAIGHT CONNECTOR
FITTING GP-FUEL LINES
117-0183 FITTING GP-FUEL LINES
117-0183 FITTING GP-FUEL LINES
NUMBER 10 STRAIGHT FUEL INLET FITTING WITHOUT BLEED AND HAS 7/8-14X45-DEG FLARE
FITTING GP-FUEL LINES
222-1510 FITTING GP-FUEL LINES
222-1510 FITTING GP-FUEL LINES
FUEL SUPPLY, 7/8-14X45-DEGREE FLARE, STRAIGHT CONNECTOR
ALSO AN ATTACHMENT
FITTING GP-FUEL LINES
222-1511 FITTING GP-FUEL LINES
222-1511 FITTING GP-FUEL LINES
S/N MBL1-19644
FUEL SUPPLY, 7/8-14X45-DEGREE FLARE, 90-DEGREE ELBOW
ALSO AN ATTACHMENT
FITTING GP-FUEL LINES
222-1512 FITTING GP-FUEL LINES
222-1512 FITTING GP-FUEL LINES
FUEL SUPPLY, 7/8-14X45-DEGREE FLARE, TEE CONNECTION WITH BLEED FITTING
AN ATTACHMENT
FITTING GP-FUEL LINES
222-1513 FITTING GP-FUEL LINES
222-1513 FITTING GP-FUEL LINES
FUEL SUPPLY, 7/8-14X37-DEGREE FLARE, 45-DEGREE ELBOW
FOR USE WITH DUAL SEAT 37/45 DEGREE HOSE ENDS
ALSO AN ATTACHMENT
FITTING GP-FUEL LINES
222-1514 FITTING GP-FUEL LINES
222-1514 FITTING GP-FUEL LINES
FUEL RETURN, 5/8-18X45-DEGREE FLARE, STRAIGHT CONNECTOR
ALSO AN ATTACHMENT
FITTING GP-FUEL LINES
222-1515 FITTING GP-FUEL LINES
222-1515 FITTING GP-FUEL LINES
FUEL RETURN, 3/4-16X45-DEGREE FLARE, STRAIGHT CONNECTOR
ALSO AN ATTACHMENT
FITTING GP-FUEL LINES
222-1516 FITTING GP-FUEL LINES
222-1516 FITTING GP-FUEL LINES
FUEL RETURN, 3/4-16X45-DEGREE FLARE, 90-DEGREE ELBOW
ALSO AN ATTACHMENT
FITTING GP-FUEL LINES
222-1517 FITTING GP-FUEL LINES
222-1517 FITTING GP-FUEL LINES
FUEL RETURN, 3/4-16X45-DEGREE FLARE, 45-DEGREE ELBOW
ALSO AN ATTACHMENT
FITTING GP-FUEL LINES
242-9457 FITTING GP-FUEL LINES
242-9457 FITTING GP-FUEL LINES
FUEL SUPPLY, 7/8-14X37-DEGREE FLARE, 45-DEGREE ELBOW, ORIENTED STRAIGHT UP
AN ATTACHMENT
LINES GP-FUEL
216-9293 LINES GP-FUEL
216-9293 LINES GP-FUEL
PLUG GP-FUEL LINES
123-0782 PLUG GP-FUEL LINES
123-0782 PLUG GP-FUEL LINES
S/N MBL1049-19644
FUEL BLEED LOCATION ON FUEL ADAPTER
CANNOT BE USED WITH @@@@@123-0783@@@@@
ALSO AN ATTACHMENT
LINES GP-FUEL INJECTION
INJECTOR GP-FUEL
223-5328 INJECTOR GP-FUEL
223-5328 INJECTOR GP-FUEL
S/N MBL1-999
PART OF 216-7224 PUMP GP-FUEL INJECTION
INJECTOR GP-FUEL
229-5918 INJECTOR GP-FUEL
229-5918 INJECTOR GP-FUEL
S/N MBL1000-UP
PART OF 216-7224 PUMP GP-FUEL INJECTION
LINES GP-FUEL INJECTION
222-1472 LINES GP-FUEL INJECTION
222-1472 LINES GP-FUEL INJECTION
S/N MBL1-3477
PROVIDES FUEL LINES WITH THERMAL BYPASS VALVE AND BASE FOR STANDARD FILTER LOCATION CENTERED ON CYLINDER HEAD
ALSO AN ATTACHMENT
LINES GP-FUEL INJECTION
222-1472 LINES GP-FUEL INJECTION
222-1472 LINES GP-FUEL INJECTION
S/N MBL3478-UP
PROVIDES FUEL LINES WITH THERMAL BYPASS VALVE AND BASE FOR STANDARD FILTER LOCATION CENTERED ON CYLINDER HEAD
ALSO AN ATTACHMENT
LINES GP-FUEL INJECTION
222-1473 LINES GP-FUEL INJECTION
222-1473 LINES GP-FUEL INJECTION
S/N MBL1-3477
PROVIDES FUEL LINES WITH THERMAL BYPASS VALVE, BASE, AND PRIMARY FUEL FILTER BRACKET FOR STANDARD FUEL FILTER LOCATION
ALSO AN ATTACHMENT
LINES GP-FUEL INJECTION
222-1473 LINES GP-FUEL INJECTION
222-1473 LINES GP-FUEL INJECTION
S/N MBL3478-UP
PROVIDES FUEL LINES WITH THERMAL BYPASS VALVE, BASE, AND PRIMARY FUEL FILTER BRACKET FOR STANDARD FUEL FILTER LOCATION
ALSO AN ATTACHMENT
LINES GP-FUEL INJECTION
222-1474 LINES GP-FUEL INJECTION
222-1474 LINES GP-FUEL INJECTION
S/N MBL1-3477
PROVIDES FUEL LINES WITH THERMAL BYPASS VALVE AND BASE FOR HIGH MOUNT FUEL FILTER LOCATION
ALSO AN ATTACHMENT
LINES GP-FUEL INJECTION
222-1474 LINES GP-FUEL INJECTION
222-1474 LINES GP-FUEL INJECTION
S/N MBL3478-UP
PROVIDES FUEL LINES WITH THERMAL BYPASS VALVE AND BASE FOR HIGH MOUNT FUEL FILTER LOCATION
ALSO AN ATTACHMENT
LINES GP-FUEL INJECTION
222-1476 LINES GP-FUEL INJECTION
222-1476 LINES GP-FUEL INJECTION
S/N MBL1-3477
750MM LINES. PROVIDES FUEL LINES WITH THERMAL BYPASS VALVE, BASE, AND PRIMARY FUEL FILTER BRACKET FOR REMOTE FUEL FILTER LOCATION
FOR USE WITH 4 CYLINDER AIR COMPRESSOR
AN ATTACHMENT
LINES GP-FUEL INJECTION
222-1476 LINES GP-FUEL INJECTION
222-1476 LINES GP-FUEL INJECTION
S/N MBL3478-UP
750MM LINES. PROVIDES FUEL LINES WITH THERMAL BYPASS VALVE, BASE, AND PRIMARY FUEL FILTER BRACKET FOR REMOTE FUEL FILTER LOCATION
FOR USE WITH 4 CYLINDER AIR COMPRESSOR
AN ATTACHMENT
LINES GP-FUEL INJECTION
222-1477 LINES GP-FUEL INJECTION
222-1477 LINES GP-FUEL INJECTION
S/N MBL1-3477
1083MM LINES. PROVIDES FUEL LINES WITH THERMAL BYPASS VALVE AND BASE FOR REMOTE FILTER LOCATION
ALSO AN ATTACHMENT
LINES GP-FUEL INJECTION
222-1477 LINES GP-FUEL INJECTION
222-1477 LINES GP-FUEL INJECTION
S/N MBL3478-19644
1083MM LINES. PROVIDES FUEL LINES WITH THERMAL BYPASS VALVE AND BASE FOR REMOTE FILTER LOCATION
ALSO AN ATTACHMENT
LINES GP-FUEL INJECTION
222-1478 LINES GP-FUEL INJECTION
222-1478 LINES GP-FUEL INJECTION
S/N MBL1-3477
PROVIDES FUEL LINES WITH THERMAL BYPASS VALVE AND BASE FOR STANDARD FILTER LOCATION WITH LOW SIDE CLEARANCE
AN ATTACHMENT
LINES GP-FUEL INJECTION
222-1478 LINES GP-FUEL INJECTION
222-1478 LINES GP-FUEL INJECTION
S/N MBL3478-UP
PROVIDES FUEL LINES WITH THERMAL BYPASS VALVE AND BASE FOR STANDARD FILTER LOCATION WITH LOW SIDE CLEARANCE
AN ATTACHMENT
LINES GP-FUEL INJECTION
222-1479 LINES GP-FUEL INJECTION
222-1479 LINES GP-FUEL INJECTION
S/N MBL1-3477
PROVIDES FUEL LINES WITH THERMAL BYPASS VALVE FOR ENGINES WITHOUT A SECONDARY FUEL FILTER
AN ATTACHMENT
LINES GP-FUEL INJECTION
222-1479 LINES GP-FUEL INJECTION
222-1479 LINES GP-FUEL INJECTION
S/N MBL4017-UP
PROVIDES FUEL LINES WITH THERMAL BYPASS VALVE FOR ENGINES WITHOUT A SECONDARY FUEL FILTER
ALSO AN ATTACHMENT
LINES GP-FUEL INJECTION
222-1480 LINES GP-FUEL INJECTION
222-1480 LINES GP-FUEL INJECTION
S/N MBL2147-3477
PROVIDES FUEL LINES WITH THERMAL VALVE FOR FUEL RECIRCULATION
FOR USE WITH @@@@@224-5031@@@@@
ALSO AN ATTACHMENT
LINES GP-FUEL INJECTION
222-1480 LINES GP-FUEL INJECTION
222-1480 LINES GP-FUEL INJECTION
S/N MBL3478-19644
PROVIDES FUEL LINES WITH THERMAL VALVE FOR FUEL RECIRCULATION
FOR USE WITH @@@@@224-5031@@@@@
ALSO AN ATTACHMENT
LINES GP-FUEL INJECTION
227-6712 LINES GP-FUEL INJECTION
227-6712 LINES GP-FUEL INJECTION
S/N MBL1-3477
PROVIDES FUEL LINES AND BASE FOR STANDARD FILTER LOCATION
ALSO AN ATTACHMENT
LINES GP-FUEL INJECTION
227-6712 LINES GP-FUEL INJECTION
227-6712 LINES GP-FUEL INJECTION
S/N MBL3478-19644
PROVIDES FUEL LINES AND BASE FOR STANDARD FILTER LOCATION
ALSO AN ATTACHMENT
PUMP GP-FUEL INJECTION
INJECTOR GP-FUEL
223-5328 INJECTOR GP-FUEL
223-5328 INJECTOR GP-FUEL
S/N MBL1-999
PART OF 216-7224 PUMP GP-FUEL INJECTION
INJECTOR GP-FUEL
229-5918 INJECTOR GP-FUEL
229-5918 INJECTOR GP-FUEL
S/N MBL1000-UP
PART OF 216-7224 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
216-7224 PUMP GP-FUEL INJECTION
216-7224 PUMP GP-FUEL INJECTION
S/N MBL1-999
PUMP GP-FUEL INJECTION
216-7224 PUMP GP-FUEL INJECTION
216-7224 PUMP GP-FUEL INJECTION
S/N MBL1000-UP
WIRING GP-UNIT INJECTOR
117-2760 WIRING GP-UNIT INJECTOR
117-2760 WIRING GP-UNIT INJECTOR
WIRING GP-UNIT INJECTOR
257-4183 WIRING GP-UNIT INJECTOR
257-4183 WIRING GP-UNIT INJECTOR
FOR USE AS SERVICE REPAIR FOR INJECTOR HARNESSES WITH THE 7E-6513 CONNECTOR
FIELD INSTALLATION
PUMP GP-FUEL PRIMING
PUMP GP-FUEL PRIMING
116-5411 PUMP GP-FUEL PRIMING
116-5411 PUMP GP-FUEL PRIMING -HAND
ALSO AN ATTACHMENT
PUMP GP-FUEL PRIMING
116-5412 PUMP GP-FUEL PRIMING
116-5412 PUMP GP-FUEL PRIMING
FORWARD MOUNT
ALSO AN ATTACHMENT
PUMP GP-FUEL TRANSFER
PUMP & MTG GP-FUEL TRANSFER
116-5428 PUMP & MTG GP-FUEL TRANSFER
116-5428 PUMP & MTG GP-FUEL TRANSFER
S/N MBL1-222
PUMP GP-FUEL TRANSFER
222-9839 PUMP GP-FUEL TRANSFER
222-9839 PUMP GP-FUEL TRANSFER
ALSO AN ATTACHMENT
SEPARATOR GP-WATER
BOWL AS-WATER COLLECTION
155-2629 BOWL AS-WATER COLLECTION
155-2629 BOWL AS-WATER COLLECTION
12 VOLT FUEL HEATER BOWL
FOR USE WITH @@@@@133-5671@@@@@
AN ATTACHMENT
FILTER GP-WATER SEP & FUEL
133-5671 FILTER GP-WATER SEP & FUEL
133-5671 FILTER GP-WATER SEP & FUEL
AN ATTACHMENT
FILTER GP-WATER SEP & FUEL
459-3810 FILTER GP-WATER SEP & FUEL
459-3810 FILTER GP-WATER SEP & FUEL
FIELD REPLACEMENT FOR @@@@@8N-0940@@@@@
FIELD INSTALLATION
SEPARATOR GP-WATER
8N-0940 SEPARATOR GP-WATER
8N-0940 SEPARATOR GP-WATER
PRIMARY 10 MICRON FILTER/WATER SEPARATOR, USE ON SUCTION SIDE OF TRANSFER PUMP WITH 1/2 INCH HOSE
FIELD REPLACEMENT ORDER @@@@@459-3810@@@@@
AN ATTACHMENT

Information:

(For parts list, see above)

Truck Engine News
A New Check Valve is Available for the Fuel Filter Base {1262}
2003/11/01
Improved Seal on Fuel Filter {1261}
2005/09/01
Engine News
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1260}
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1260}
Operation and Maintenance Manual
Fuel System Primary Filter/Water Separator - Drain
C-10, C-12 and C-15 On-Highway Engines
Fuel System Primary Filter - Clean/Replace
C-10, C-12 and C-15 On-Highway Engines
Fuel System Secondary Filter - Replace
C-10, C-12 and C-15 On-Highway Engines
Specifications
Fuel Filter and Water Separator
C-10 and C-12 Truck Engines
Fuel Priming Pump and Primary Fuel Filter
C-10 and C-12 Truck Engines
Tool Operating Manual
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Disassembly and Assembly
Fuel Filter Base - Remove and Install
C-10 and C-12 On-Highway Engines
Tool Operating Manual
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Truck Engine News
Warranty Claims on Switch Snubber {1051, 1274}
2005/03/01
Specifications
Fuel Lines
C-10 and C-12 Truck Engines
Disassembly and Assembly
Fuel Manifold - Remove
C-10 and C-12 On-Highway Engines
Fuel Manifold - Install
C-10 and C-12 On-Highway Engines
Truck Engine News
The Procedure for the Removal of the Electronic Unit Injector has Changed {1290}
2004/04/01
The Procedure for the Installation of the Electronic Unit Injector has Changed {1290}
2004/04/01
Do Not Reuse the Hold Down Bolts for the Fuel Injector {1290}
2009/10/29
Replacing Lifters for the Unit Injectors {1209, 1290}
2006/06/01
Technical Information Bulletin
The Valve Body May Crack on Certain Remanufactured Fuel Injectors{1290}
The Valve Body May Crack on Certain Remanufactured Fuel Injectors{1290}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Magazine
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Truck Engine News
The Procedure For Tightening The Clamping Bolt For The Unit Injector Has Changed {1250, 1290}
2002/10/01
Operation and Maintenance Manual
Hoses and Clamps - Inspect/Replace
C-10, C-12 and C-15 On-Highway Engines
Fuel System - Prime
C-10, C-12 and C-15 On-Highway Engines
Fuel System - Prime
C-10, C-12 and C-15 On-Highway Engines
Truck Engine News
New Part Numbers for Fuel Injector Groups {1251, 1254}
2003/09/01
Replace the Fuel Injector Hold-Down Bolt When You Service the Electronic Unit Injectors on Engines, Including Remanufactured Engines with Serial Number Prefix 3LZ, AKB, ALS or R1D {1251, 1254}
2006/04/01
Improved O-Ring Seals for Fuel Injectors for Longer Seal Life {1254}
2003/11/01
New Part Numbers for Fuel Injector Groups {1251, 1254}
2003/09/01
The Procedure for the Removal of the Electronic Unit Injector has Changed {1290}
2004/04/01
The Procedure for the Installation of the Electronic Unit Injector has Changed {1290}
2004/04/01
Replace the Fuel Injector Hold-Down Bolt When You Service Electronic Unit Injectors {1290}
2004/06/01
Replace the Fuel Injector Hold-Down Bolt When You Service the Electronic Unit Injectors on Engines, Including Remanufactured Engines with Serial Number Prefix 3LZ, AKB, ALS or R1D {1251, 1254}
2006/04/01
Do Not Reuse the Hold Down Bolts for the Fuel Injector {1290}
2009/10/29
Replacing Lifters for the Unit Injectors {1209, 1290}
2006/06/01
Do not Use the 1U-6661 Pop Tester Gp to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Cat<SUP>&reg;</SUP> Reman Is Announcing an Appearance Change to the EI550 Classic, Bridge, and ACERT Electronic Unit Injectors for Certain Truck Engines {1290}
2015/06/26
Operation and Maintenance Manual
Electronic Unit Injector - Inspect/Adjust
C-10, C-12 and C-15 On-Highway Engines
Special Instruction
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Technical Information Bulletin
The Valve Body May Crack on Certain Remanufactured Fuel Injectors{1290}
The Valve Body May Crack on Certain Remanufactured Fuel Injectors{1290}
Specifications
Electronic Unit Injector Wiring
C-10 and C-12 Truck Engines
Electronic Unit Injector Mechanism
C-10 and C-12 Truck Engines
Electronic Unit Injector
C-10 and C-12 Truck Engines
Information Release Memo
REMANUFACTURED FUEL INJECTORS FOR VARIOUS INDUSTRIAL, MACHINE, AND ON-HIGHWAY TRUCK APPLICATIONS-ADDENDUM
REMANUFACTURED FUEL INJECTORS FOR VARIOUS INDUSTRIAL, MACHINE, AND ON-HIGHWAY TRUCK APPLICATIONS-ADDENDUM
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Testing and Adjusting
Electronic Unit Injector - Adjust
C-10 and C-12 Truck Engines
Electronic Unit Injector - Test
C-10 and C-12 Truck Engines
Troubleshooting
0001-11 Cylinder #1 Injector current fault (72)
C-10, C-12 and C-15 On-highway Engines
0002-11 Cylinder #2 Injector current fault (72)
C-10, C-12 and C-15 On-highway Engines
0003-11 Cylinder #3 Injector current fault (73)
C-10, C-12 and C-15 On-highway Engines
0004-11 Cylinder #4 Injector current fault (73)
C-10, C-12 and C-15 On-highway Engines
0005-11 Cylinder #5 Injector current fault (74)
C-10, C-12 and C-15 On-highway Engines
0006-11 Cylinder #6 Injector current fault (74)
C-10, C-12 and C-15 On-highway Engines
Injector Code - Calibrate
C-10, C-12 and C-15 On-highway Engines
Injector Solenoid Circuit - Test
C-10, C-12 and C-15 On-highway Engines
Disassembly and Assembly
Electronic Unit Injector - Remove
C-10 and C-12 On-Highway Engines
Electronic Unit Injector - Install
C-10 and C-12 On-Highway Engines
Service Magazine
Replace the Fuel Injector Hold-Down Bolt When You Service Electronic Unit Injectors {1251, 1290}
2004/06/07
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Do not Use the 1U-6661 Pop Tester Gp to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/08
Operation and Maintenance Manual
Fuel System - Prime
C-10, C-12 and C-15 On-Highway Engines
Fuel System - Prime
C-10, C-12 and C-15 On-Highway Engines
Special Instruction
Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System{1258}
Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System{1258}
Technical Information Bulletin
Inspect the Check Valve in the Fuel Filter Base if You Have Starting Problems or if the Engine Runs Rough
Inspect the Check Valve in the Fuel Filter Base if You Have Starting Problems or if the Engine Runs Rough
Faulty Fuel Priming Pumps on Various Engines
Faulty Fuel Priming Pumps on Various Engines
Specifications
Fuel Priming Pump and Primary Fuel Filter
C-10 and C-12 Truck Engines
Testing and Adjusting
Fuel System - Prime
C-10 and C-12 Truck Engines
Disassembly and Assembly
Fuel Priming Pump - Remove and Install
C-10 and C-12 On-Highway Engines
Service Magazine
Special Instruction, REHS1037 , "Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System" has been Revised {1258}
2004/03/29
Truck Engine News
A New Mounting Gasket for the Fuel Transfer Pump is Available {1256, 1256}
2004/12/01
A New Fuel Transfer Pump Has Been Released {1256}
2014/08/07
A New Fuel Transfer Pump Is Now Available for Certain Truck Engines {1256}
2014/10/03
Specifications
Fuel Transfer Pump
C-10 and C-12 Truck Engines
Tool Operating Manual
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Testing and Adjusting
Fuel System Pressure - Test
C-10 and C-12 Truck Engines
Disassembly and Assembly
Fuel Transfer Pump - Remove
C-10 and C-12 On-Highway Engines
Fuel Transfer Pump - Install
C-10 and C-12 On-Highway Engines
Operation and Maintenance Manual
Fuel Tank Water and Sediment - Drain
C-10, C-12 and C-15 On-Highway Engines
Fuel System Primary Filter/Water Separator - Drain
C-10, C-12 and C-15 On-Highway Engines
Fuel System Water Separator - Drain
C-10, C-12 and C-15 On-Highway Engines
Specifications
Fuel Filter and Water Separator
C-10 and C-12 Truck Engines
Operation and Maintenance Manual
Fuel Tank Water and Sediment - Drain
C-10, C-12 and C-15 On-Highway Engines
Tool Operating Manual
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Disassembly and Assembly
Fuel Recirculation Valve - Remove and Install
C-10 and C-12 On-Highway Engines