AVSPARE.COM
parts catalog

102-5836 STARTING MOTOR GP-ELECTRIC S/N MBL1-19644 24-VOLT. STARTING AID RECOMMENDED BELOW 0-DEG CELSIUS (32-DEG F) FOR USE WITH 24-VOLT SYSTEM AND LH STARTER MOUNT FLYWHEEL HOUSING, REQUIRES: SAE NO. 1 FLYWHEEL HOUSING ALSO AN ATTACHMENT C-12




ELECTRICAL AND STARTING SYSTEM

STARTING MOTOR GP
 

#SEBP36822110
 

102-5836: STARTING MOTOR GP-ELECTRIC

102-5836 STARTING MOTOR GP-ELECTRIC
S/N MBL1-19644
24-VOLT. STARTING AID RECOMMENDED BELOW 0-DEG CELSIUS (32-DEG F)
FOR USE WITH 24-VOLT SYSTEM AND LH STARTER MOUNT FLYWHEEL HOUSING, REQUIRES: SAE NO. 1 FLYWHEEL HOUSING
ALSO AN ATTACHMENT
i01622350 SEBP3682
  For full view, you need register

Parts for your C-12 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8S-2332 [3] BOLT-12 POINT HEAD (5/8-11X1.75-IN)  
2. 4H-7869 [1] GASKET  
3. 207-1556 CY [1] STARTING MOTOR GP-ELECTRIC (24-VOLT)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP36822111
 

207-1524: STARTING MOTOR GP-ELECTRIC

207-1524 STARTING MOTOR GP-ELECTRIC
12-VOLT
FIELD REPLACEMENT FOR @@@@@207-1537@@@@@
i01596929 SEBP3682
  For full view, you need register

Parts for your C-12 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3T-3434 [6] PLUG  
2. 7T-3279 [1] HOUSING AS  
3. 8T-8566 [1] TERMINAL AS  
4. 6V-8188 [4] NUT (1/2-13-THD)  
5. 7X-0562 [4] WASHER-HARD (13.5X19X0.8-MM THK)  
6. 3T-3422 [1] WIRE AS  
7. 8T-8570 [1] HOLDER AS-BRUSH  
8. 8T-8568 [1] COIL AS-FIELD  
9. 7T-3454 [1] INSULATOR  
10. 7T-3271 [1] CONNECTOR  
11. 7T-3451 [1] KIT-INSULATOR (STARTING MOTOR)  
12. 8T-8569 [1] INSULATOR-TERMINAL  
13. 5S-7349 [4] BOLT (1/4-20X0.5-IN)  
14. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
15. 8H-1141 [4] SHOE-POLE  
16. 3F-0379 [8] SCREW-POLE SHOE (3/8-24-THD)  
17. 7T-3275 [1] ARMATURE AS (12-VOLT)  
18. 3E-7775 [1] HOUSING AS  
19. 4M-1831 [1] PLUG-LEVER HOUSING  
20. 7L-2894 [1] GASKET  
21. 036-9823 [5] BOLT (1/4-28X1-IN)  
22. 6N-3826 [1] DRIVE AS-MOTOR  
23. 7T-3974 [1] HOUSING AS-DRIVE  
24. 7X-3373 [6] BOLT (5/16-18X0.88-IN)  
25. 206-8789 [1] KIT-SOLENOID (12-VOLT)(STARTING MOTOR)  
26. 6V-8378 [3] NUT (10-32-THD)  
27. 8F-1434 [2] LOCKWASHER  
28. 8T-0328 [3] WASHER-HARD (5.5X10X1-MM THK)  
29. 9X-4824 [1] COVER-STARTING MOTOR  
30. 8T-9884 [1] KIT-INSULATOR (STARTING MOTOR)  
    (INCLUDES INSULATORS & BUSHING)
31. 8T-9885 [1] KIT-BRUSH (STARTING MOTOR)  
    (INCLUDES BRUSHES, SPRINGS, SCREWS, & SEAL)
32. 7T-3268 [1] KIT-LEVER (STARTING MOTOR)  
    (INCLUDES LEVER ASSEMBLIES, SEALS, NUT, GASKET, & RETAINER)
   
    AVAILABLE REPAIR KIT(S):
  7T-3267 [1] KIT-BUSHING (STARTING MOTOR)  
    (INCLUDES BUSHINGS, WICKS, CUPS, SEALS, GASKET, SCREW AS, WASHERS, SPACER, & NUT)
 

#SEBP36822112
 

207-1537: STARTING MOTOR GP-ELECTRIC

207-1537 STARTING MOTOR GP-ELECTRIC
12-VOLT
PART OF 9Y-7129 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT ORDER @@@@@207-1524@@@@@
ALSO AN ATTACHMENT
i01602739 SEBP3682
  For full view, you need register

Parts for your C-12 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3T-3434 [6] PLUG  
2. 7T-3279 [1] HOUSING AS  
3. 8T-8566 [1] TERMINAL AS  
4. 6V-8188 [4] NUT (1/2-13-THD)  
5. 7X-0562 [4] WASHER-HARD (13.5X19X0.8-MM THK)  
6. 3T-3422 [1] WIRE AS  
7. 8T-8570 [1] HOLDER AS-BRUSH  
8. 8T-8568 [1] COIL AS-FIELD  
9. 7T-3454 [1] INSULATOR  
10. 7T-3271 [1] CONNECTOR  
11. 7T-3451 [1] KIT-INSULATOR (STARTING MOTOR)  
12. 8T-8569 [1] INSULATOR-TERMINAL  
13. 5S-7349 [4] BOLT (1/4-20X0.5-IN)  
14. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
15. 8H-1141 [4] SHOE-POLE  
16. 3F-0379 [8] SCREW-POLE SHOE (3/8-24-THD)  
17. 7T-3275 [1] ARMATURE AS (12-VOLT)  
18. 3E-7775 [1] HOUSING AS  
19. 4M-1831 [1] PLUG-LEVER HOUSING  
20. 7L-2894 [1] GASKET  
21. 036-9823 [5] BOLT (1/4-28X1-IN)  
22. 6N-3826 [1] DRIVE AS-MOTOR  
23. 7T-3974 [1] HOUSING AS-DRIVE  
24. 7X-3373 [6] BOLT (5/16-18X0.88-IN)  
25. 206-8789 [1] KIT-SOLENOID (12-VOLT)(STARTING MOTOR)  
26. 6V-8378 [2] NUT (10-32-THD)  
27. 8F-1434 [2] LOCKWASHER  
28. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
29. 8T-9884 [1] KIT-INSULATOR (STARTING MOTOR)  
    (INCLUDES INSULATORS & BUSHING)
30. 8T-9885 [1] KIT-BRUSH (STARTING MOTOR)  
    (INCLUDES BRUSHES, SPRINGS, SCREWS, & SEAL)
31. 7T-3268 [1] KIT-LEVER (STARTING MOTOR)  
    (INCLUDES LEVER ASSEMBLIES, SEALS, NUT, GASKET, & RETAINER)
   
    AVAILABLE REPAIR KIT(S):
  7T-3267 [1] KIT-BUSHING (STARTING MOTOR)  
    (INCLUDES BUSHINGS, WICKS, CUPS, SEALS, GASKET, SCREW AS, WASHERS, SPACER, & NUT)
 

#SEBP36822113
 

207-1556: STARTING MOTOR GP-ELECTRIC

207-1556 STARTING MOTOR GP-ELECTRIC
24-VOLT
PART OF 102-5836 STARTING MOTOR GP-ELECTRIC
OPTIONAL FIELD REPLACEMENT ORDER @@@@@237-1962@@@@@
ALSO AN ATTACHMENT
i01592733 SEBP3682
  For full view, you need register

Parts for your C-12 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3T-3434 [6] PLUG  
2. 7T-3279 [1] HOUSING AS  
3. 8T-8566 [1] TERMINAL AS  
4. 6V-8188 [4] NUT (1/2-13-THD)  
5. 7X-0562 [4] WASHER-HARD (13.5X19X0.8-MM THK)  
6. 3T-3422 [1] WIRE AS  
7. 7T-3278 [1] HOLDER AS-BRUSH  
8. 7T-3277 [1] COIL AS-FIELD  
9. 7T-3454 [1] INSULATOR  
10. 283-1107 [1] KIT-CONNECTOR (STARTING MOTOR)  
    (INCLUDES CONNECTORS, BOLT & TERMINAL-STARTER)
11. 7T-3451 [1] KIT-INSULATOR (STARTING MOTOR)  
    (INCLUDES INSULATORS & GROMMET)
12. 8T-8569 [1] INSULATOR-TERMINAL  
13. 5S-7349 [4] BOLT (1/4-20X0.5-IN)  
14. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
15. 8H-1141 [4] SHOE-POLE  
16. 3R-8797 [8] SCREW & WASHER AS (3/8-24X0.72-IN)  
17. 7T-3276 [1] ARMATURE AS (24-VOLT)  
18. 3E-7775 [1] HOUSING AS  
19. 4M-1831 [1] PLUG-LEVER HOUSING  
20. 7L-2894 [1] GASKET  
21. 0S-1597 [5] BOLT (1/4-28X1-IN)  
22. 6N-3826 [1] DRIVE AS-MOTOR  
23. 7T-3974 [1] HOUSING AS-DRIVE  
24. 7X-3373 [6] BOLT (5/16-18X0.88-IN)  
25. 548-9596 [1] KIT-SOLENOID (24-VOLT)(INSULATED)  
    (INCLUDES BOLT, NUTS, & CONNECTORS)
26. 6V-8378 [3] NUT (10-32-THD)  
27. 8F-1434 [2] LOCKWASHER  
28. 8T-0328 [3] WASHER-HARD (5.5X10X1-MM THK)  
29. 9X-4824 [1] COVER-STARTING MOTOR  
30. 8T-9884 [1] KIT-INSULATOR (STARTING MOTOR)  
    (INCLUDES INSULATORS & BUSHING)
31. 8C-3655 [1] KIT-BRUSH (STARTING MOTOR)  
    (INCLUDES BRUSHES, SPRINGS, SCREWS, SCREW ASSEMBLIES & SEAL)
32. 7T-3268 [1] KIT-LEVER (STARTING MOTOR)  
    (INCLUDES LEVER ASSEMBLIES, SEAL, NUT, GASKET & RETAINER)
   
    AVAILABLE REPAIR KIT(S):
  7T-3267 [1] KIT-BUSHING (STARTING MOTOR)  
    (INCLUDES BUSHINGS, WICKS, CUPS, SEALS, GASKET, SCREW AS, WASHERS, SPACER & NUT)
 

#SEBP36822114
 

237-1962: STARTING MOTOR GP-ELECTRIC

237-1962 STARTING MOTOR GP-ELECTRIC
24-VOLT
Type 1
FIELD REPLACEMENT FOR @@@@@207-1556@@@@@
i01972316 SEBP3682
  For full view, you need register

Parts for your C-12 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7M-0326 [1] CONNECTOR  
2. 9H-3757 [2] WASHER (0.516X1X0.094-IN THK)  
3. 1S-7446 [3] SCREW-MACHINE (8-32X0.437-IN)  
4. 8C-9660 [3] WASHER (4.6X7.9X0.8-MM THK)  
5. 9S-2544 [9] SCREW-HEX HEAD (8-32X11.13-MM)  
6. 7M-0327 [1] WASHER-THRUST (17.4X25.4X1.6-MM THK)  
7. 3T-3418 [1] FRAME AS-END  
  3T-3423 [1] CUP  
  3T-3424 [1] PLUG-FELT  
  9G-4101 [1] BUSHING-END  
8. 3T-9525 [1] PLATE AS-BRUSH (STARTING MOTOR)  
8A. 6T-0371 [1] INSULATOR  
8B. 5P-6298 [12] SCREW-MACHINE (10-32X0.5-IN)  
  9F-5599 [12] LOCKWASHER  
8C. 7F-3525 [6] WASHER-SPECIAL (0.207X0.39X0.09-IN THK)  
8D. 6T-0372 [1] PLATE  
8E. 3T-4709 [3] PLATE  
8F. 2L-6679 [3] PLATE-INSULATOR  
8G. 3T-4710 [3] PLATE  
8H. 6T-0363 [6] HOLDER AS-BRUSH (STARTING MOTOR)  
    (EACH INCLUDES)
8J. 3T-9494 [1] SPRING  
9. 1T-0808 [2] WASHER (0.516X0.812X0.09-IN THK)  
10. 3T-3422 [1] WIRE AS (STARTING MOTOR)  
11. 2J-8163 [2] SEAL-O-RING  
12. 7X-3373 [1] BOLT (5/16-18X0.88-IN)  
13. 3T-3434 [6] PLUG  
14. 5J-5314 [5] BOLT (5/16-18X1.5-IN)  
15. 3L-3380 [1] BUSHING-TERMINAL  
16. 036-9821 [1] WASHER  
17. 4M-1828 [1] RETAINER-SPRING  
18. 306-3998 [1] BOOT-RUBBER  
19. 9M-7609 [1] SPRING (SHIFT LEVER)  
20. 4M-1827 [1] RETAINER-SPRING  
21. 8C-3089 [1] SEAL-O-RING  
22. 4M-1853 [1] LEVER AS-SHIFT  
23. 5M-3034 [1] LOCKNUT (5/16-24-THD)  
24. 7L-2894 [4] GASKET  
25. 4M-1831 [4] PLUG-LEVER HOUSING  
26. 4M-1854 [1] SHAFT-LEVER  
27. 1H-1023 [1] SEAL-O-RING  
28. 2D-6392 [1] SEAL-O-RING  
29. 7T-3974 [1] HOUSING AS-DRIVE  
30. 6N-3826 [1] DRIVE AS-MOTOR  
31. 2H-3429 [2] RING-RETAINING  
32. 6V-1322 [4] BOLT (1/4-20X0.375-IN)  
33. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
34. 6N-3279 [1] INSULATOR  
35. 0S-1597 [13] BOLT (1/4-28X1-IN)  
36. 1M-9971 [1] SPACER (0.835X1.72X0.188-IN THK)  
37. 1H-2629 [3] STRIP-INSULATION  
38. 7M-0324 [1] COIL AS-FIELD  
39. 3R-8797 [12] SCREW & WASHER AS (3/8-24X0.72-IN)  
40. 7F-3488 [6] SHOE-POLE  
41. 7M-8651 [1] ARMATURE AS  
42. 7M-0325 [1] INSULATOR  
43. 3T-9524 [6] BRUSH AS  
44. 3N-3763 [1] KIT-TERMINAL (STARTING MOTOR)  
    (INCLUDES BUSHINGS & WASHERS)
45. 125-6537 [1] INSULATOR  
46. 3R-8801 [1] CLAMP  
47. 8F-1434 [2] LOCKWASHER  
48. 6V-8188 [6] NUT (1/2-13-THD)  
49. 7X-0562 [6] WASHER-HARD (13.5X19X0.8-MM THK)  
50. 4B-2049 [6] NUT (10-32-THD)  
51. 8T-0328 [10] WASHER-HARD (5.5X10X1-MM THK)  
52. 3T-9494 [6] SPRING (STARTING MOTOR)  
53. 3E-7771 [1] HOUSING AS (STARTING MOTOR)  
54. 9G-4101 [1] BUSHING-END  
55. 3T-3424 [3] PLUG-FELT  
56. 3T-3423 [3] CUP  
57. 1M-9968 [1] BUSHING  
58. 2F-6678 [1] SEAL-LIP TYPE  
59. 4L-2729 [1] WASHER (0.844X1.9X0.188-IN THK)  
60. 4M-1896 [1] BUSHING-TERMINAL  
61. 045-4065 [4] SCREW-MACHINE (10-32X0.75-IN)  
62. 125-6535 [1] COVER-STARTING MOTOR  
63. 7T-9123 [1] GASKET-PLATE  
64. 318-2082 [1] SOLENOID AS-STARTING MOTOR (24-VOLT)  
  3R-8801 [1] CLAMP  
65. 125-6536 [1] TERMINAL AS  
 

#SEBP36822115
 

237-1962: STARTING MOTOR GP-ELECTRIC

237-1962 STARTING MOTOR GP-ELECTRIC
24-VOLT
Type 2
FIELD REPLACEMENT FOR @@@@@207-1556@@@@@
i06992648 SEBP3682
  For full view, you need register

Parts for your C-12 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7M-0326 [1] CONNECTOR  
2. 9H-3757 [2] WASHER (0.516X1X0.094-IN THK)  
3. 1S-7446 [3] SCREW-MACHINE (8-32X0.437-IN)  
4. 8C-9660 [3] WASHER (4.6X7.9X0.8-MM THK)  
5. 9S-2544 [9] SCREW-HEX HEAD (8-32X11.13-MM)  
6. 7M-0327 [1] WASHER-THRUST (17.4X25.4X1.6-MM THK)  
7. 3T-3418 [1] FRAME AS-END  
  3T-3423 [1] CUP  
  3T-3424 [1] PLUG-FELT  
  9G-4101 [1] BUSHING-END  
8. 3T-9525 [1] PLATE AS-BRUSH (STARTING MOTOR)  
8A. 6T-0371 [1] INSULATOR  
8B. 5P-6298 [12] SCREW-MACHINE (10-32X0.5-IN)  
  9F-5599 [12] LOCKWASHER  
8C. 7F-3525 [6] WASHER-SPECIAL (0.207X0.39X0.09-IN THK)  
8D. 6T-0372 [1] PLATE  
8E. 3T-4709 [3] PLATE  
8F. 2L-6679 [3] PLATE-INSULATOR  
8G. 3T-4710 [3] PLATE  
8H. 6T-0363 [6] HOLDER AS-BRUSH (STARTING MOTOR)  
    (EACH INCLUDES)
8J. 3T-9494 [1] SPRING  
9. 1T-0808 [2] WASHER (0.516X0.812X0.09-IN THK)  
10. 3T-3422 [1] WIRE AS (STARTING MOTOR)  
11. 2J-8163 [2] SEAL-O-RING  
12. 7X-3373 [1] BOLT (5/16-18X0.88-IN)  
13. 3T-3434 [6] PLUG  
14. 5J-5314 [5] BOLT (5/16-18X1.5-IN)  
15. 3L-3380 [1] BUSHING-TERMINAL  
16. 036-9821 [1] WASHER  
17. 4M-1828 [1] RETAINER-SPRING  
18. 306-3998 [1] BOOT-RUBBER  
19. 9M-7609 [1] SPRING (SHIFT LEVER)  
20. 4M-1827 [1] RETAINER-SPRING  
21. 8C-3089 [1] SEAL-O-RING  
22. 4M-1853 [1] LEVER AS-SHIFT  
23. 5M-3034 [1] LOCKNUT (5/16-24-THD)  
24. 7L-2894 [4] GASKET  
25. 4M-1831 [4] PLUG-LEVER HOUSING  
26. 4M-1854 [1] SHAFT-LEVER  
27. 1H-1023 [1] SEAL-O-RING  
28. 2D-6392 [1] SEAL-O-RING  
29. 7T-3974 [1] HOUSING AS-DRIVE  
30. 6N-3826 [1] DRIVE AS-MOTOR  
31. 2H-3429 [2] RING-RETAINING  
32. 6V-1322 [4] BOLT (1/4-20X0.375-IN)  
33. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
34. 6N-3279 [1] INSULATOR  
35. 0S-1597 [13] BOLT (1/4-28X1-IN)  
36. 1M-9971 [1] SPACER (0.835X1.72X0.188-IN THK)  
37. 1H-2629 [3] STRIP-INSULATION  
38. 7M-0324 [1] COIL AS-FIELD  
39. 3R-8797 [12] SCREW & WASHER AS (3/8-24X0.72-IN)  
40. 7F-3488 [6] SHOE-POLE  
41. 7M-8651 [1] ARMATURE AS  
42. 7M-0325 [1] INSULATOR  
43. 3T-9524 [6] BRUSH AS  
44. 3N-3763 [1] KIT-TERMINAL (STARTING MOTOR)  
    (INCLUDES BUSHINGS & WASHERS)
46. 3R-8801 [1] CLAMP  
47. 8F-1434 [2] LOCKWASHER  
48. 6V-8188 [6] NUT (1/2-13-THD)  
49. 7X-0562 [6] WASHER-HARD (13.5X19X0.8-MM THK)  
50. 4B-2049 [6] NUT (10-32-THD)  
51. 8T-0328 [10] WASHER-HARD (5.5X10X1-MM THK)  
52. 3T-9494 [6] SPRING (STARTING MOTOR)  
53. 3E-7771 [1] HOUSING AS (STARTING MOTOR)  
54. 9G-4101 [1] BUSHING-END  
55. 3T-3424 [3] PLUG-FELT  
56. 3T-3423 [3] CUP  
57. 1M-9968 [1] BUSHING  
59. 4L-2729 [1] WASHER (0.844X1.9X0.188-IN THK)  
60. 4M-1896 [1] BUSHING-TERMINAL  
61. 045-4065 [4] SCREW-MACHINE (10-32X0.75-IN)  
62. 125-6535 [1] COVER-STARTING MOTOR  
63. 7T-9123 [1] GASKET-PLATE  
64. 338-3453 C [1] SOLENOID AS-STARTING MOTOR (24-VOLT)  
  3R-8801 [1] CLAMP  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP36822116
 

9Y-7129: STARTING MOTOR GP-ELECTRIC

9Y-7129 STARTING MOTOR GP-ELECTRIC
12-VOLT. STARTING AID RECOMMENDED BELOW 0 DEG CELSIUS (32 DEG F)
ALSO AN ATTACHMENT
i01602766 SEBP3682
  For full view, you need register

Parts for your C-12 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8S-2332 [3] BOLT-12 POINT HEAD (5/8-11X1.75-IN)  
2. 207-1537 CY [1] STARTING MOTOR GP-ELECTRIC  
3. 4H-7869 [1] GASKET  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP36822117
 

175-2303: SWITCH GP-MAGNETIC

175-2303 SWITCH GP-MAGNETIC -AIR INLET HEATER
S/N MBL10484-UP
12-VOLT
PART OF 224-5030 WIRING GP-ELECTRONIC CONTROL
ALSO AN ATTACHMENT
i01821454 SEBP3682
  For full view, you need register

Parts for your C-12 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
2. 186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
3. 1H-3338 [2] LOCKWASHER (EXTERNAL TOOTH)  
4. 012-0380 [2] LOCKWASHER (6.5X12.5X1.6-MM THK)  
5. 5C-2890 M [2] NUT (M6X1-THD)  
6. 9X-1813 E SLEEVE (16-CM)  
7. 3E-7276 [1] SWITCH AS-MAGNETIC (12-VOLT)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP36822118
 

130-0787: WIRING GP-ELECTRONIC CONTROL

130-0787 WIRING GP-ELECTRONIC CONTROL
DUAL PASSIVE SENSORS
i01818645 SEBP3682
  For full view, you need register

Parts for your C-12 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 197-8393 CY [1] SENSOR GP-PRESSURE (ATMOSPHERIC)  
2. 197-8391 CY [1] SENSOR GP-TEMPERATURE (AIR INLET MANIFOLD)  
2A. 197-8391 CY [1] SENSOR GP-TEMPERATURE (FUEL)  
3. 096-4840 [1] CLIP  
4. 3S-2093 [6] STRAP-CABLE  
5. 134-3988 [1] CLIP (LOOP)  
6. 6V-8214 M [2] BOLT (M6X1X20-MM)  
7. 5P-4115 [2] WASHER-HARD (7.2X19X2-MM THK)  
8. 8J-1256 [1] CLIP (LOOP)  
9. 4P-8134 [2] CLIP (LADDER)  
10. 164-9609 [1] ELBOW  
11. 197-8401 C [1] HARNESS AS-ENGINE (ELECTRONIC CONTROL MODULE)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
    (INCLUDES PLUG AS & WEDGE)
  155-2270 [5] KIT-CONNECTING PLUG (2-PIN)  
    (EACH INCLUDES PLUG AS & WEDGE)
  160-7690 [1] PLUG AS-CONNECTOR (70-PIN)  
  159-9322 [1] SEAL-O-RING  
  155-2260 [2] KIT-CONNECTING PLUG (3-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
12. 197-8395 CY [1] SENSOR GP-PRESSURE (AIR INLET MANIFOLD)  
14. 197-8394 CY [1] SENSOR GP-PRESSURE (ENGINE OIL)  
15. 6V-5049 [1] SEAL-O-RING  
16. 197-8392 Y [1] SENSOR GP-TEMPERATURE (WATER, COOLANT)  
17. 3E-7448 [1] CONNECTOR  
18. 197-8397 Y [1] SENSOR GP-SPEED (CAMSHAFT TIMING)  
19. 4P-5918 [1] CLIP  
20. 6V-5048 [1] SEAL-O-RING  
21. 6V-5215 M [1] BOLT (M8X1.25X16-MM)  
22. 9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
23. 8T-0642 M [2] BOLT (M8X1.25X14-MM)  
24. 197-8396 Y [1] SENSOR GP-SPEED (CRANKSHAFT TIMING)  
25. 9S-4191 [1] PLUG (9/16-18-THD)  
26. 8M-2771 [1] CLIP  
27. 6V-8837 M [1] BOLT (M6X1X16-MM)  
28. 9X-8267 [1] WASHER (6.6X12X2-MM THK)  
29. 6V-7981 M [1] BOLT (M10X1.5X70-MM)  
30. 6V-5839 [1] WASHER (11X21X2.5-MM THK)  
31. 4D-7794 [1] CLIP  
32. 2M-7077 [1] SPACER (0.406X0.62X0.37-IN THK)  
33. 6V-4369 [1] CLIP  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36822119
 

224-5030: WIRING GP-ELECTRONIC CONTROL

224-5030 WIRING GP-ELECTRONIC CONTROL
S/N MBL1-1480
AIR SHUTOFF FEATURE
FOR USE WITH @@@@@215-6860@@@@@
CANNOT BE USED WITH @@@@@127-3288@@@@@, @@@@@157-0098@@@@@
AN ATTACHMENT
i01780051 SEBP3682
  For full view, you need register

Parts for your C-12 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2M-7077 [1] SPACER (0.406X0.62X0.37-IN THK)  
2. 3E-7448 [1] CONNECTOR  
3. 3S-2093 [12] STRAP-CABLE  
4. 4P-5918 [1] CLIP  
6. 131-3201 [2] BOOT  
7. 161-1704 [1] SENSOR GP-PRESSURE (AIR INLET MANIFOLD)  
8. 175-2303 Y [1] SWITCH GP-MAGNETIC (AIR INLET HEATER)  
9. 197-8391 Y [1] SENSOR GP-TEMPERATURE (AIR INLET MANIFOLD)  
10. 197-8392 Y [1] SENSOR GP-TEMPERATURE (WATER, COOLANT)  
11. 197-8393 Y [1] SENSOR GP-PRESSURE (ATMOSPHERIC)  
12. 197-8394 Y [1] SENSOR GP-PRESSURE (ENGINE OIL)  
13. 197-8396 Y [1] SENSOR GP-SPEED (CRANKSHAFT TIMING)  
14. 197-8397 Y [1] SENSOR GP-SPEED (CAMSHAFT TIMING)  
15. 211-7888 [1] WIRE AS  
16. 227-0938 [1] HARNESS AS-WIRING (ELECTRONIC CONTROL MODULE)(AIR SHUTOFF)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
    (INCLUDES PLUG AS & WEDGE)
  155-2260 [3] KIT-CONNECTING PLUG (3-PIN)  
    (EACH INCLUDES PLUG AS & WEDGE)
  155-2270 [9] KIT-CONNECTING PLUG (2-PIN)  
    (EACH INCLUDES PLUG AS & WEDGE)
  160-7690 [1] PLUG AS-CONNECTOR (70-PIN)  
  159-9322 [1] SEAL-O-RING  
17. 132-5789 [3] CLIP (LADDER)  
18. 164-9609 [1] ELBOW  
19. 4D-7794 [1] CLIP  
20. 4K-8864 [2] CLIP (LOOP)  
21. 4P-7581 [2] CLIP (LADDER)  
22. 4P-8134 [4] CLIP (LADDER)  
23. 5P-4115 [2] WASHER-HARD (7.2X19X2-MM THK)  
24. 6V-5048 [1] SEAL-O-RING (8.92MM ID)  
25. 6V-5049 [1] SEAL-O-RING (11.89MM ID)  
26. 6V-5215 M [1] BOLT (M8X1.25X16-MM)  
27. 6V-5839 [2] WASHER (11X21X2.5-MM THK)  
28. 6V-7981 M [1] BOLT (M10X1.5X70-MM)  
29. 6V-8214 M [2] BOLT (M6X1X20-MM)  
30. 6V-8837 M [1] BOLT (M6X1X16-MM)  
31. 8M-2770 [1] CLIP (LOOP)  
32. 8M-2771 [1] CLIP  
33. 8T-0642 M [2] BOLT (M8X1.25X14-MM)  
34. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
35. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
36. 8T-4970 M [2] BOLT (M6X1X14-MM)  
37. 9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
38. 9S-4191 [1] PLUG (9/16-18-THD)  
39. 9S-8752 [1] NUT-FULL (3/8-16-THD)  
40. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
41. 9X-8267 [1] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Truck Engine News
Operation and Maintenance Manual
Starting the Engine
C-10, C-12 and C-15 On-Highway Engines
Cold Start Strategy
C-10, C-12 and C-15 On-Highway Engines
Starting Recommendations
Cold Weather Recommendations for On-Highway Diesel Truck Engines
Cold Weather Recommendation Charts
Cold Weather Recommendations for On-Highway Diesel Truck Engines
Special Instruction
Caterpillar PRELUB<SUP>&reg;</SUP> Diagnostics{1469}
Caterpillar PRELUB® Diagnostics{1469}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Replace Armature of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Specifications
Electric Starting Motor
C-10 and C-12 Truck Engines
Electric Starting Motor
C-10 and C-12 Truck Engines
Electric Starting Motor
C-10 and C-12 Truck Engines
Testing and Adjusting
Electric Starting System - Test
C-10 and C-12 Truck Engines
Pinion Clearance - Adjust
C-10 and C-12 Truck Engines
Disassembly and Assembly
Electric Starting Motor - Remove and Install
C-10 and C-12 On-Highway Engines

Caterpillar Parts SIS Catalog C-12 :

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.