AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

105-3196 MOTOR GP-GEROTOR S/N 1241-UP PART OF 5T-0570 DRIVE GP-CIRCLE 120H MOTOR GRADER


HYDRAULIC SYSTEM
MOTOR GP
PUMP GP
PUMP GP-METERING
PUMP GP
DRIVE GP
SWIVEL GP
TANK GP

MOTOR GRADER 120H MOTOR GRADER 124
 120H Motor Grader 12400001-UP (MACHINE) POWERED BY 3126B Engine SEBP3683 120H 124   (2003)

HYDRAULIC SYSTEM

MOTOR GP
FAN & MOTOR GP
196-6985 FAN & MOTOR GP
MOTOR GP-GEAR
224-7040 MOTOR GP-GEAR
MOTOR GP-GEROTOR
105-3196 MOTOR GP-GEROTOR
 

#SEBP36830310
 

105-3196: MOTOR GP-GEROTOR

105-3196 MOTOR GP-GEROTOR
S/N 1241-UP
PART OF 5T-0570 DRIVE GP-CIRCLE
i00124961 SEBP3683
1053196 MOTOR GP-GEROTOR Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-8051 [7] BOLT (3/8-24X4.12-IN)  
2. 9T-8070 [1] HOUSING AS  
3. 6Y-2934 [1] BEARING-ROLLER  
4. 6Y-2933 [2] RING-THRUST  
5. 6Y-2932 [1] BEARING-THRUST  
6. 8T-1698 [1] BEARING AS-NEEDLE  
7. 9T-9071 [1] SHIM  
8. 9T-8058 [1] BACKUP  
9. 9T-8059 [1] SEAL  
10. 9T-8056 [1] SHAFT  
11. 6Y-2935 [1] BEARING  
12. 9T-8053 [5] SEAL  
13. 9T-8054 [1] LINK  
14. 9T-8061 [1] PLATE  
15. 9T-8063 [1] ROTOR SET  
16. 9T-8065 [1] MANIFOLD  
17. 9J-4963 [1] RING  
18. 9T-8069 [1] PLATE AS  
19. 9T-8067 [1] COVER  
   
    AVAILABLE REPAIR KIT(S):
  9T-9072 [1] KIT-SEAL (BROOM MOTOR)  
    (INCLUDES RING, SHIM, SEALS & GREASE PACK)
 

#SEBP36830311
 

159-4739: PUMP & MTG GP-PISTON

159-4739 PUMP & MTG GP-PISTON
S/N 1241-UP
PART OF 2C-9820 GENERAL AR
i01871273 SEBP3683
1594739 PUMP & MTG GP-PISTON Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5R-4787 [4] PLATE  
2. 8X-4467 [1] PLATE AS  
3. 169-4883 Y [1] PUMP GP-PISTON (HYDRAULIC FAN)  
4. 196-1867 [4] MOUNT AS  
5. 200-1934 Y [1] PUMP GP-PISTON (STEERING)  
6. 201-8328 [1] COUPLING  
7. 1A-5822 [4] BOLT (1/2-13X2.75-IN)  
8. 5P-8245 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
9. 6D-7146 [1] SEAL-O-RING  
10. 6V-8675 M [2] BOLT (M12X1.75X35-MM)  
11. 6V-8765 [4] WASHER-HARD (15X26X3-MM THK)  
12. 8C-3425 M [4] BOLT (M14X2X35-MM)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP36830312
 

102-1501: PUMP GP-METERING

102-1501 PUMP GP-METERING -STEERING
S/N 1241-UP
PART OF 7I-4718 CONTROL GP-STEERING
i00124954 SEBP3683
1021501 PUMP GP-METERING Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-5885 [1] SHAFT  
2. 9J-2935 [1] RING-RETAINING  
3. 065-1153 [1] RING-SNAP  
4. 9U-9693 [1] BALL BEARING  
5. 6E-5887 [1] RETAINER  
6. 6E-5884 [1] HOUSING  
7. 6S-7826 [1] RETAINER-BALL  
8. 6S-7827 [1] BALL  
9. 5F-9144 [1] SEAL-O-RING  
10. 3G-6907 [1] SEAT  
11. 1H-1023 [3] SEAL-O-RING  
12. 3G-6906 [1] SCREW (9/16-18X0.559-IN)  
13. 102-2804 [1] SEAL  
14. 3G-6891 [2] RACE  
15. 9T-8560 [1] KIT-SPRING  
16. 7J-6839 [1] DRIVE-CONTROL END  
17. 3G-3458 [1] SPACER (0.38X0.9X0.48-IN THK)  
18. 114-5168 [7] BOLT (5/16-24X2-IN)  
19. 114-5180 [1] CAP  
20. 3G-8997 [1] GEROTOR AS  
21. 114-5190 [1] SPACER (23.8X55.9X4-MM THK)  
22. 9J-5686 [3] SEAL-O-RING  
23. 7J-8009 [1] PIN  
24. 5L-1100 [1] BEARING-THRUST  
25. 7F-8267 [1] SEAL-O-RING  
26. 9J-5442 [1] RING-RETAINING  
27. 9J-8076 [1] BUSHING-TERMINAL  
28. 8F-5340 [1] SEAL-LIP TYPE  
29. 114-5347 [2] PLUG  
30. 114-5342 [2] RETAINER-BALL  
31. 114-5339 [2] BALL  
32. 114-5337 [2] SEAT-VALVE  
33. 114-5325 [2] SPRING  
34. 114-5075 [2] SPRING  
35. 114-5326 [2] PLUG  
36. 114-5132 [1] VALVE AS-CHECK  
37. 114-5332 [2] BALL  
   
    AVAILABLE REPAIR KIT(S):
  118-4660 [1] KIT-SEAL (STEERING METERING)  
 

#SEBP36830313
 

169-4883: PUMP GP-PISTON

169-4883 PUMP GP-PISTON -HYDRAULIC FAN
S/N 1241-UP
PART OF 159-4739 PUMP & MTG GP-PISTON
i01871305 SEBP3683
1694883 PUMP GP-PISTON Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-9597 [1] RING-RETAINING  
2. 155-9134 [2] PLATE  
3. 194-9453 Y [1] ROTATING GP-PUMP (HYDRAULIC FAN)  
4. 8U-6457 [4] SEAL-O-RING  
5. 9X-6032 M [4] BOLT-SOCKET HEAD (M10X1.5X30-MM)  
6. 191-7583 [1] BEARING-TAPERED  
7. 191-7582 [1] SHIM (2.5-MM THK)  
8. 176-1378 [1] SEAL-O-RING  
9. 155-9142 [1] GUIDE  
10. 155-9143 [1] SPRING  
11. 155-9141 [1] PISTON  
14. 191-7581 [1] SHAFT  
15. 155-9125 [1] BEARING AS-ROLLER  
16. 155-9127 [1] SEAL  
17. 195-9634 [1] SWASHPLATE AS  
18. 155-9139 [1] PISTON  
19. 191-7584 [1] GUIDE  
20. 136-8423 [1] PLUG-BREAK OFF  
21. 9X-8979 [1] DOWEL  
22. 155-9129 [1] HOUSING  
23. 195-9639 Y [1] VALVE GP-PUMP CONTROL (PRESSURE, FLOW COMPENSATOR)(HYDRAULIC FAN)  
24. 9X-7680 [3] SEAL-O-RING  
25. 9S-8002 [1] PLUG (7/16-20-THD)  
26. 3J-7354 [1] SEAL-O-RING  
27. 8T-8442 M [4] BOLT-SOCKET HEAD (M6X1X30-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36830314
 

200-1934: PUMP GP-PISTON

200-1934 PUMP GP-PISTON -IMPLEMENT & STEERING
S/N 1241-UP
SLIPPER
PART OF 159-4739 PUMP & MTG GP-PISTON
i01871310 SEBP3683
2001934 PUMP GP-PISTON Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-6594 [1] BEARING-SWASH  
2. 6E-4224 [1] PLUG-SWASHPLATE  
3. 033-6036 [1] SEAL-O-RING  
4. 141-1052 [1] HEAD-PUMP  
5. 9T-1699 [1] SPRING  
6. 9T-1710 [1] POPPET  
7. 9T-1636 [1] SEAT  
8. 6E-6596 [1] COVER-TRUNNION  
9. 6V-3834 [1] SEAL-O-RING  
10. 3E-4302 M [2] SCREW-FLAT HEAD (M4X0.7X10-MM)  
11. 6V-8214 M [3] BOLT (M6X1X20-MM)  
12. 6E-6597 [1] BEARING-SWASH  
13. 7X-2607 M [2] BOLT (M12X1.75X130-MM)  
14. 8T-0372 M [4] BOLT (M12X1.75X90-MM)  
15. 104-3122 Y [1] VALVE GP-PUMP CONTROL (PRESSURE, FLOW COMPENSATOR)(IMPLEMENT & STEERING)  
16. 8T-5039 [3] SEAL-O-RING  
17. 6V-8337 M [4] BOLT-SOCKET HEAD (M8X1.25X35-MM)  
18. 095-0888 [2] PIN-SPRING  
19. 201-8604 [1] SHAFT  
20. 102-2384 [1] HOUSING-PUMP  
21. 006-8663 [1] RING  
22. 8T-4750 [1] SEAL-LIP TYPE  
23. 6E-6599 [1] KIT-BIAS PISTON  
    (INCLUDES SPRING, PISTON, ROD, & SEAL)
24. 6E-6600 [1] SPRING-BIAS  
25. 6E-6571 Y [1] ROTATING GP-PUMP (IMPLEMENT & STEERING)  
26. 6E-6601 [1] GASKET  
27. 7L-9061 [2] SEAL-O-RING  
28. 3E-7417 [2] PLUG  
29. 8T-7876 [2] SEAL-O-RING  
30. 9T-1633 [1] PLATE  
31. 9T-2197 B [1] SHIM PACK (INCLUDES 17-SHIMS)  
32. 1P-6872 [1] CUP-BEARING  
33. 004-9040 [1] CONE-BEARING  
34. 9T-1652 [1] PIN  
35. 6E-6602 [1] KIT-PISTON CONTROL  
    (INCLUDES ROD, PISTON, & SEAL)
36. 167-1802 [1] SWASHPLATE GP  
  1H-3937 [2] PIN  
  167-1801 [2] STOP  
37. 7T-8273 [1] CUP-BEARING  
38. 7T-8272 [1] CONE-BEARING  
39. 3K-0360 [1] SEAL-O-RING  
40. 9S-4185 [1] PLUG (3/4-16-THD)  
41. 104-3124 [1] SHIELD  
42. 201-8327 [1] ADAPTER  
43. 8C-3089 [1] SEAL-O-RING  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36830315
 

194-9453: ROTATING GP-PUMP

194-9453 ROTATING GP-PUMP -HYDRAULIC FAN
S/N 1241-UP
PART OF 169-4883 PUMP GP-PISTON
i01871312 SEBP3683
1949453 ROTATING GP-PUMP Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 155-9112 [9] PISTON AS  
2. 155-9136 [1] BARREL  
3. 266-7837 [1] PLATE  
4. 155-9116 [1] GUIDE-BALL  
5. 155-9117 [1] SPRING  
6. 194-9479 [3] PIN  
7. 194-9480 [1] RING-RETAINING  
8. 194-9481 [1] DISC-THRUST  
9. 194-9478 [1] PLATE-PORT  
 

#SEBP36830316
 

6E-6571: ROTATING GP-PUMP

6E-6571 ROTATING GP-PUMP -IMPLEMENT, STEERING, BRAKE
S/N 1241-UP
PART OF 200-1934 PUMP GP-PISTON
i00124679 SEBP3683
6E6571 ROTATING GP-PUMP Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-6604 [2] PLATE-SPACER  
2. 6E-6605 [2] PLATE-LIMITER  
3. 3T-0849 M [4] BOLT-SOCKET HEAD (M6X1X25-MM)  
4. 9T-7755 [1] SPRING  
5. 009-2069 [1] RING  
6. 9T-7754 [1] GUIDE-OUTER  
7. 9T-7757 [1] BARREL  
8. 9T-7756 [1] GUIDE-INNER  
9. 9T-7759 [1] PLATE-RETAINING  
10. 9T-7761 [9] PISTON  
  M   METRIC PART
 

#SEBP36830317
 

178-9582: SHAFT GP-PUMP DRIVE

178-9582 SHAFT GP-PUMP DRIVE
S/N 1241-UP
PART OF 2C-9820 GENERAL AR
i01891823 SEBP3683
1789582 SHAFT GP-PUMP DRIVE Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1B-8737 [1] KEY-WOODRUFF  
2. 1D-5120 [1] NUT-JAM (3/4-16-THD)  
3. 7D-9267 [1] YOKE  
4. 178-7983 [1] SLIP JOINT GP  
  0L-0478 [8] BOLT (3/8-24X1.75-IN)  
  5T-1362 [2] SPIDER & BEARING AS  
  178-7985 [1] YOKE AS  
5. 0L-0478 [4] BOLT (3/8-24X1.75-IN)  
6. 0S-1571 [4] BOLT (3/8-16X1.75-IN)  
7. 5P-8248 [1] WASHER-HARD (20X36.5X3.5-MM THK)  
 

#SEBP36830318
 

173-1011: SWIVEL GP

173-1011 SWIVEL GP
S/N 1241-UP
PART OF 207-9152 LINES GP-HYDRAULIC
i01477758 SEBP3683
1731011 SWIVEL GP Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 173-1009 [1] RETAINER  
2. 8J-2331 [7] SEAL  
3. 2H-3928 [7] SEAL-O-RING  
4. 173-1007 [2] SEAL  
5. 9T-5603 [1] BODY  
6. 4J-9964 [2] SEAL  
7. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
8. 5P-2566 [6] BOLT (1/2-13X1.5-IN)  
9. 3H-0107 [4] SEAL-O-RING  
10. 8J-0377 [1] COVER  
11. 173-1008 [1] ROTOR  
12. 5J-1246 B [6] SHIM (0.13-MM THK)  
  B   USE AS REQUIRED
 

#SEBP36830319
 

207-2410: TANK & FILTER GP-HYDRAULIC

207-2410 TANK & FILTER GP-HYDRAULIC
S/N 1241-UP
PART OF 207-2409 TANK & MTG GP-HYDRAULIC
i01893213 SEBP3683
2072410 TANK & FILTER GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1L-4349 [1] SPRING  
2. 1R-0774 [1] FILTER ELEMENT AS-OIL (ADVANCED EFFICIENCY)(REVERSE FLOW)  
    -OR-
  4T-3134 [1] FILTER ELEMENT AS-OIL (FIRE RESISTANT FLUID)  
    -OR-
  139-1536 [1] FILTER ELEMENT AS-OIL (ULTRA HIGH EFFICIENCY)  
3. 2D-4202 [1] PLATE  
4. 3F-1547 [1] SEAL-O-RING  
5. 3G-3498 [1] FLANGE  
6. 4M-6921 [1] WASHER-SPRING  
7. 5D-1911 [1] COVER-HYDRAULIC CAP  
8. 226-2871 [1] ROD  
9. 7H-1447 [1] CAP-FILLER (HYDRAULIC OIL)  
10. 9J-1979 [1] RETAINER AS  
11. 9J-1985 [1] TUBE AS  
12. 9J-1988 [1] VALVE (FILTER BYPASS)  
13. 9J-3047 [1] STRAINER (HYDRAULIC OIL FILLER)  
14. 9M-7394 [1] LEVER  
15. 207-2411 [1] TANK AS-HYDRAULIC  
16. 226-2870 [1] CAP AS (HYDRAULIC TANK)  
17. 217-2661 [1] GAUGE-SIGHT (HYDRAULIC OIL)  
  5J-2974 [4] SEAL-O-RING  
  114-4231 [2] BOLT-MOUNTING  
18. 086-0507 [1] PIN  
19. 141-9661 [1] SPACER (20X128X6-MM THK)  
20. 1L-5072 [1] DOWEL  
21. 2J-7761 [1] RING-RETAINING  
22. 2K-4973 [1] LOCKNUT (3/8-16-THD)  
23. 2S-5100 [1] VALVE-MANUAL  
24. 3G-0361 [1] GASKET  
25. 5K-9107 [2] BOLT-LOCKING (3/8-16X0.75-IN)  
26. 7D-1195 [1] SEAL-O-RING  
27. 8T-2275 [1] BALL  
28. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
29. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
30. 9H-6454 [1] GASKET  
31. 3B-4610 [1] PIN-COTTER  
32. 4B-2913 [1] PIN-CLEVIS  
  M   METRIC PART
 

Information:

Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Procedure to Rework the Motor and the Control Valve for the Circle Drive on Certain Motor Graders{5051, 5082}
Procedure to Rework the Motor and the Control Valve for the Circle Drive on Certain Motor Graders{5051, 5082}
Specifications
Gerotor Motor (Circle Drive)
120H and 135H Motor Graders Hydraulic and Steering System
Gear Motor (Hydraulic Fan)
120H and 135H Motor Graders Hydraulic and Steering System
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Systems Operation
Fan Drive System
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Disassembly and Assembly
Fan and Gear Motor (Hydraulic Fan) - Remove
120H and 135H Motor Graders Machine Systems
Fan and Gear Motor (Hydraulic Fan) - Install
120H and 135H Motor Graders Machine Systems
Gerotor Motor (Circle Drive) - Assemble
120H and 135H Motor Graders Machine Systems
Gerotor Motor (Circle Drive) - Disassemble
120H and 135H Motor Graders Machine Systems
Gear Motor (Hydraulic Fan) - Disassemble
120H and 135H Motor Graders Machine Systems
Gear Motor (Hydraulic Fan) - Assemble
120H and 135H Motor Graders Machine Systems
Gerotor Motor (Circle Drive) - Remove
120H and 135H Motor Graders Machine Systems
Gerotor Motor (Circle Drive) - Install
120H and 135H Motor Graders Machine Systems
Service Magazine
The Fan Motors are No Longer Painted {1386, 5061}
2003/06/30
Procedure To Test the Slip Clutch for the Circle Drive {5082, 5207, 5209}
2004/08/16
A New Rework Procedure Improves Gerotor Motor and Control Valve for the Circle Drive on Certain Motor Graders {5051, 5082}
2012/07/11

Caterpillar Parts SIS Catalog 120H :

MOTOR GP-GEAR
224-7040 MOTOR GP-GEAR
MANIFOLD GP-CONTROL
191-5292 MANIFOLD GP-CONTROL
MANIFOLD GP-CONTROL
112-2240 MANIFOLD GP-CONTROL
LOCK GP-CENTERSHIFT
164-8462 LOCK GP-CENTERSHIFT
LINES GP-STEERING
171-6442 LINES GP-STEERING
LINES GP-RIPPER
166-3308 LINES GP-RIPPER
LINES GP-RIPPER
166-3308 LINES GP-RIPPER
LINES GP-PUMP
171-6431 LINES GP-PUMP
PUMP & MTG GP-PISTON
159-4739 PUMP & MTG GP-PISTON
PUMP GP-METERING
102-1501 PUMP GP-METERING
PUMP GP-PISTON
169-4883 PUMP GP-PISTON
PUMP GP-PISTON
200-1934 PUMP GP-PISTON
ROTATING GP-PUMP
194-9453 ROTATING GP-PUMP
ROTATING GP-PUMP
6E-6571 ROTATING GP-PUMP
SHAFT GP-PUMP DRIVE
178-9582 SHAFT GP-PUMP DRIVE
SWIVEL GP
173-1011 SWIVEL GP

Truck sale:

Caterpillar 120H
 
Caterpillar 120H
- motor graders
CAVPOWER
 
105,000 
Caterpillar 120H, motor graders, Construction


 
105,000 
Caterpillar 120H, motor graders, Construction


Caterpillar 120H, motor graders, Construction
105,000 
Caterpillar 120H, motor graders, Construction

RING POWER CORP.
Caterpillar 120H, motorgrader mijnbouw, Bouw
 
Caterpillar 120H, motorgrader mijnbouw, Bouw

CGT - COMPAGNIA GENERALE TRATTORI
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.